General Rules Motor Rules Approved Bodies Can-Am Formula 1 GT Coupe – Pro GT Coupe – FK Stock Car Can-Am Plus Anglewinder
General Rules Motor Rules Approved Bodies Can-Am Formula 1 GT Coupe – Pro GT Coupe – FK Stock Car Can-Am Plus Anglewinder Please visit the IRRA® website for updates as they occur. www.irraslotracing.com © 2015 IRRA® Quick Reference This is a quick reference of the major specifications for each class. Can-Am • Gears = Production only; no modifications except sanding • Total Weight = 100 grams minimum diameter • Chassis Width = 3.125” maximum • Body Height, Lotus 49 style = 1.375” maximum • Body Width = 3.250” at the wheel arches • Front Wings, Lotus 49 style = Width across front wings 2.875" • Body Thickness = .010" with .007" minimum on sides maximum. • Track Width, F & R = 3.125” • Body Height, All Others = 1.125” maximum • Chassis Clearance, F & R = .015” / .050” minimum • Front Grille = .125” (1/8”) • Front Tire Diameter = .750” minimum • Driver Figure / Interior = All bodies must contain a painted (at • Front Tire Width = .225” minimum least two colors), fully-molded, three-dimensional interior • Rear Tire Diameter = .8125” minimum comprising a driver (helmet, shoulders, and arms), a steering • Rear Tire Width = .810” maximum wheel, and cockpit representation. An interior may be mounted in • Motor Type = PS4002B, PS4002B-B, Topline or JK Falcon 7, JK any manner as long as it fully covers the chassis when viewed Hawk Retro FK, TSR D3, Slick 7 from above. Interiors are to be mounted with the driver facing in • Gears = Production only; no modifications except sanding the proper direction. diameter • Body Height = 1.375” maximum • Front Grille = .063” (1/16”) except Ti22 • Spoiler Size / Height = no wider than body; .500” maximum GT Coupe - Pro • Driver Figure / Interior = All bodies must contain a painted (at least two colors), fully-molded, three-dimensional interior comprising a driver (helmet, shoulders, and arms), a steering wheel, and cockpit representation.
[Show full text]