Enhanced Battle Rifle Chassis System All Variants

Home , Stock (firearms)

RIFL BATTLE ENHANCED

M1A

M14, M1 GARAND, MINI GARAND, M1 M14,

- 14

E CHASSIS SYSTEMS CHASSIS E ENHANCED BATTLE RIFLE CHASSIS SYSTEM ALL VARIANTS

RIFL BATTLE ENHANCED

M1/M1

PRODUCT SPECIFICATIONS

4 ENHANCED BATTLE RI BATTLE ENHANCED 4

*SHOWN AS STANDARD MODEL

DETAILS MODEL M14ALCS

OVERALL LENGTH 27.5” (69.85 CM) The M14ALCS Enhanced Battle Rifle COLLAPSED Chassis Stock System is precision OVERALL LENGTH SYSTEM CHASSIS FLE 33.5” (85.10 CM) CNC machined from a solid billet of EXTENDED high strength aircraft grade aluminum. SYSTEMS CHASSIS E WEIGHT 5.1 LBS (2.3 KG) Fits Mil-Spec M1A/M14 rifles with LENGTH OF PULL standard or medium weight barrels. 9” (22.85 CM) COLLAPSED LENGTH OF PULL The M14ALCS is a drop-in chassis and 15” (38.10 CM) EXTENDED features a six position telescoping FINISH MIL-SPEC HARD ANODIZE stock and an adjustable polymer cheek rest with two inches of vertical GRIP ERGO® GRIP adjustment.

ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE Additionally the chassis includes five WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a All Specifications are Averages and Subject to Change removable Kydex forend with a built in * Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles palm swell, and a soft one inch recoil may require additional gunsmithing. Does NOT accept rear- pad. lugged receivers. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding.

Available in black factory direct and in other colors only through licensed SAGE resellers.

989.739.7000 www.sageinternationalltd.com [email protected] RIFL BATTLE ENHANCED

M1/M14 ENHANCED BATT ENHANCED M1/M14

PRODUCT SPECIFICATIONS

SYS CHASSIS RIFLE LE MODEL M14ALCS/CV DETAILS

OVERALL LENGTH N/A - NO BUTT STOCK INCLUDED COLLAPSED The M14ALCS/CV Enhanced Battle Rifle Chassis Stock System is OVERALL LENGTH 28” (71.12 CM) precision CNC machined from a solid billet of high strength aircraft grade SYSTEMS CHASSIS E WEIGHT 3.5 LBS (1.6 KG) aluminum. Fits Mil-Spec M1A/M14 LENGTH OF PULL N/A - NO BUTT STOCK INCLUDED rifles with standard or medium weight COLLAPSED barrels. LENGTH OF PULL N/A - NO BUTT STOCK INCLUDED EXTENDED The M14ALCS/CV is a drop-in chassis FINISH MIL-SPEC HARD ANODIZE and features a Mil-Spec five position M4 receiver extension tube and a GRIP TANGODOWN® GRIP TangoDown® BATTLEGRIP®. ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE Additionally the chassis includes four WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP Mil-Spec 1913 Picatinny rails, three All Specifications are Averages and Subject to Change ambidextrous sling mounts, a removable Kydex forend with a built in

TEM * Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles palm swell. may require additional gunsmithing. Does NOT accept rear- lugged receivers. Rigidity of the chassis increases

accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding.

Available in black factory direct and in other colors only through licensed SAGE resellers.

989.739.7000 www.sageinternationalltd.com [email protected] M1/M14 ENHANCED BATT ENHANCED M1/M14 RIFL BATTLE ENHANCED

PRODUCT SPECIFICATIONS

SYS CHASSIS RIFLE LE

MODEL M14ALCS/CVFS DETAILS

OVERALL LENGTH N/A – BUTT STOCK DOES NOT COLLAPSE COLLAPSED The M14ALCS/CVFS Enhanced Battle Rifle Chassis Stock System is OVERALL LENGTH 33.5” (85.10 CM) precis ion CNC machined from a solid billet of high strength aircraft grade SYSTEMS CHASSIS E WEIGHT 5.1 LBS (2.3 KG) aluminum. Fits Mil-Spec M1A/M14 LENGTH OF PULL N/A – BUTT STOCK DOES NOT COLLAPSE rifles with standard or medium weight COLLAPSED barrels. LENGTH OF PULL 15” (38.10 CM) EXTENDED The M14ALCS/CVFS is a drop-in FINISH MIL-SPEC HARD ANODIZE chassis and features an all-weather fiberglass reinforced synthetic monte- GRIP INTEGRAL SYNTHETIC GRIP carlo butt stock with an integral grip ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE and rubber recoil pad.

WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP Additionally the chassis includes four All Specifications are Averages and Subject to Change Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a TEM * Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles removable Kydex forend with a built in may require additional gunsmithing. Does NOT accept rear- palm swell. lugged receivers.

Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding.

Available in black factory direct and in other colors only through licensed SAGE resellers.

989.739.7000 www.sageinternationalltd.com [email protected] RIFL BATTLE ENHANCED

M1/M14 ENHANCED BATT ENHANCED M1/M14

PRODUCT SPECIFICATIONS

*SHOWN AS STANDARD MODEL

SYS CHASSIS RIFLE LE MODEL M14ALCS/CV16FS DETAILS

OVERALL LENGTH N/A – BUTT STOCK DOES NOT COLLAPSE COLLAPSED The M14ALCS/CV16FS Enhanced Battle Rifle Chassis Stock System is OVERALL LENGTH 33.5” (85.10 CM) precision CNC machined from a solid billet of high strength aircraft grade SYSTEMS CHASSIS E WEIGHT 5.1 LBS (2.3 KG) aluminum. Fits Mil-Spec M1A/M14 LENGTH OF PULL N/A – BUTT STOCK DOES NOT COLLAPSE rifles with standard or medium weight COLLAPSED barrels. LENGTH OF PULL 15” (38.10 CM) EXTENDED The M14ALCS/CV16FS is a drop-in FINISH MIL-SPEC HARD ANODIZE chassis and features an all-weather, non-adjustable, synthetic M16 butt GRIP ERGO® GRIP stock. ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE Additionally the chassis includes four WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP Mil-Spec 1913 Picatinny rails, three All Specifications are Averages and Subject to Change ambidextrous sling mounts, a removable Kydex forend with a built in

TEM * Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles palm swell. may require additional gunsmithing. Does NOT accept rear- lugged receivers. Rigidity of the chassis increases

accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding.

Available in black factory direct and in other colors only through licensed SAGE resellers.

989.739.7000 www.sageinternationalltd.com [email protected] RIFL BATTLE ENHANCED

M1/M14 ENHANCED BATT ENHANCED M1/M14

PRODUCT SPECIFICATIONS

*SHOWN AS STANDARD MODEL

SYS CHASSIS RIFLE LE MODEL M14ALCS/PMRI DETAILS

OVERALL LENGTH 32.75” (83.19 CM) COLLAPSED The M14ALCS/PMRI Enhanced Battle Rifle Chassis Stock System is OVERALL LENGTH 34.25” (87.00 CM) EXTENDED precision CNC machined from a solid billet of high strength aircraft grade SYSTEMS CHASSIS E WEIGHT 5.5 LBS (2.50 KG) aluminum. Fits Mil-Spec M1A/M14 LENGTH OF PULL 13” (33.00 CM) rifles with standard or medium weight COLLAPSED barrels. LENGTH OF PULL 14.5” (36.83 CM) EXTENDED The M14ALCS/PMRI is a drop-in FINISH MIL-SPEC HARD ANODIZE chassis and features an adjustable MAGPUL® PRS2® butt stock. GRIP ERGO® GRIP ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP ambidextrous sling mounts, a All Specifications are Averages and Subject to Change removable Kydex forend with a built in palm swell.

TEM * Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing. Does NOT accept rear- Rigidity of the chassis increases lugged receivers. accuracy and reliability and is

achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding.

Available in black factory direct and in other colors only through licensed SAGE resellers.

989.739.7000 www.sageinternationalltd.com [email protected] M1/M14 ENHANCED BATT ENHANCED M1/M14 RIFL BATTLE ENHANCED

PRODUCT SPECIFICATIONS

*SHOWN AS STANDARD HEAVY WEIGHT MODEL

SYS CHASSIS RIFLE LE

MODEL M14ALCS-HB DETAILS

OVERALL LENGTH 27.5” (69.85 CM) The M14ALCS-HB Enhanced Battle COLLAPSED Rifle Chassis Stock System is OVERALL LENGTH 33.5” (85.10 CM) precision CNC machined from a solid EXTENDED billet of high strength aircraft grade SYSTEMS CHASSIS E WEIGHT 5.1 LBS (2.3 KG) aluminum. Fits Mil-Spec M1A/M14 LENGTH OF PULL rifles with heavy weight barrels only. 9” (22.85 CM) COLLAPSED LENGTH OF PULL The M14ALCS-HB is a drop-in chassis 15” (38.10 CM) EXTENDED and features a six position telescoping FINISH MIL-SPEC HARD ANODIZE stock and an adjustable polymer cheek rest with two inches of vertical GRIP ERGO® GRIP adjustment. ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE Additionally the chassis includes five WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP Mil-Spec 1913 Picatinny rails, three

All Specifications are Averages and Subject to Change ambidextrous sling mounts, a removable Kydex forend with a built in TEM * Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles palm swell, and a soft one inch recoil may require additional gunsmithing. Does NOT accept rear- pad. lugged receivers. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding.

Available in black factory direct and in other colors only through licensed SAGE resellers.

989.739.7000 www.sageinternationalltd.com [email protected] RIFL BATTLE ENHANCED

M1/M14 ENHANCED BATT ENHANCED M1/M14

PRODUCT SPECIFICATIONS

*SHOWN AS STANDARD HEAVY WEIGHT MODEL

SYS CHASSIS RIFLE LE MODEL M14ALCS/CV-HB DETAILS

OVERALL LENGTH N/A - NO BUTT STOCK INCLUDED COLLAPSED The M14ALCS/CV-HB Enhanced Battle Rifle Chassis Stock System is OVERALL LENGTH 28” (71.12 CM) EXTENDED precision CNC machined from a solid billet of high strength aircraft grade SYSTEMS CHASSIS E WEIGHT 3.5 LBS (1.6 KG) aluminum. Fits Mil-Spec M1A/M14 LENGTH OF PULL N/A - NO BUTT STOCK INCLUDED rifles with heavy weight barrels only. COLLAPSED LENGTH OF PULL N/A - NO BUTT STOCK INCLUDED The M14ALCS/CV-HB is a drop-in EXTENDED chassis and features a Mil-Spec five FINISH MIL-SPEC HARD ANODIZE position M4 receiver extension tube and a TangoDown® BATTLEGRIP®. GRIP TANGODOWN® GRIP ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP ambidextrous sling mounts, a All Specifications are Averages and Subject to Change removable Kydex forend with a built in palm swell.

achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding.

Available in black factory direct and in other colors only through licensed SAGE resellers.

989.739.7000 www.sageinternationalltd.com [email protected] RIFL BATTLE ENHANCED

M1/M14 ENHANCED BATT ENHANCED M1/M14

PRODUCT SPECIFICATIONS

*SHOWN AS STANDARD HEAVY WEIGHT MODEL

SYS CHASSIS RIFLE LE MODEL M14ALCS/CVFS-HB DETAILS

OVERALL LENGTH N/A – BUTT STOCK DOES NOT COLLAPSE COLLAPSED The M14ALCS/CVFS-HB Enhanced Battle Rifle Chassis Stock System is OVERALL LENGTH 33.5” (85.10 CM) EXTENDED precision CNC machined from a solid billet of high strength aircraft grade SYSTEMS CHASSIS E WEIGHT 5.1 LBS (2.3 KG) aluminum. Fits Mil-Spec M1A/M14 LENGTH OF PULL N/A – BUTT STOCK DOES NOT COLLAPSE rifles with heavy weight barrels only. COLLAPSED LENGTH OF PULL 15” (38.10 CM) The M14ALCS/CVFS-HB is a drop-in EXTENDED chassis and features an all-weather FINISH MIL-SPEC HARD ANODIZE fiberglass reinforced synthetic monte- carlo butt stock with an integral grip GRIP INTEGRAL SYNTHETIC GRIP and rubber recoil pad. ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE Additionally the chassis includes four WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP Mil-Spec 1913 Picatinny rails, three All Specifications are Averages and Subject to Change ambidextrous sling mounts, a removable Kydex forend with a built in

TEM * Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles palm swell. may require additional gunsmithing. Does NOT accept rear- lugged receivers. Rigidity of the chassis increases

accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding.

Available in black factory direct and in other colors only through licensed SAGE resellers.

989.739.7000 www.sageinternationalltd.com [email protected] M1/M14 ENHANCED BATT ENHANCED M1/M14 RIFL BATTLE ENHANCED

PRODUCT SPECIFICATIONS

*SHOWN AS STANDARD HEAVY BARREL MODEL

SYS CHASSIS RIFLE LE

MODEL M14ALCS/PMRI-HB DETAILS

OVERALL LENGTH 32.75” (83.19 CM) COLLAPSED The M14ALCS/PMRI-HB Enhanced Battle Rifle Chassis Stock System is OVERALL LENGTH 34.25” (87.00 CM) EXTENDED precision CNC machined from a solid billet of high strength aircraft grade SYSTEMS CHASSIS E WEIGHT 5.5 LBS (2.5 KG) aluminum. Fits Mil-Spec M1A/M14 LENGTH OF PULL 13” (33.00 CM) rifles with heavy weight barrels only. COLLAPSED LENGTH OF PULL 14.5” (36.83 CM) The M14ALCS/PMRI-HB is a drop-in EXTENDED chassis and features an adjustable FINISH MIL-SPEC HARD ANODIZE MAGPUL® PRS2® butt stock.

GRIP ERGO® GRIP Additionally the chassis includes four ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE Mil-Spec 1913 Picatinny rails, three ambidextrous sling mounts, a WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP removable Kydex forend with a built in All Specifications are Averages and Subject to Change palm swell. TEM * Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles Rigidity of the chassis increases may require additional gunsmithing. Does NOT accept rear- accuracy and reliability and is lugged receivers. achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding.

Available in black factory direct and in other colors only through licensed

SAGE resellers.

989.739.7000 www.sageinternationalltd.com [email protected] M1 GARAND ENHANCED B ENHANCED GARAND M1 RIFL BATTLE ENHANCED

PRODUCT SPECIFICATIONS

*SHOWN AS STANDARD MODEL

ATTLE RIFLE CHASSIS CHASSIS RIFLE ATTLE

MODEL M1GALCS DETAILS

OVERALL LENGTH 33.25” (84.45 CM) COLLAPSED The M1GALCS Enhanced Battle Rifle Chassis Stock System is precision OVERALL LENGTH 39.50 (100.33 CM) EXTENDED CNC machined from a solid billet of high strength aircraft grade aluminum. SYSTEMS CHASSIS E WEIGHT 5.5 LBS (2.50 KG) Fits Mil-Spec M1 Garand rifles with LENGTH OF PULL 9” (22.85 CM) standard length barrels. COLLAPSED LENGTH OF PULL 15” (38.10 CM) The M1GALCS is a drop-in chassis EXTENDED and features a six position telescoping FINISH MIL-SPEC HARD ANODIZE stock and an adjustable polymer cheek rest with two inches of vertical GRIP ERGO® GRIP adjustment. ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE Additionally the chassis includes five WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP Mil-Spec 1913 Picatinny rails, three All Specifications are Averages and Subject to Change ambidextrous sling mounts, a

removable Kydex forend with a built in SYSTEM * Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles palm swell, and a soft one inch recoil may require additional gunsmithing. pad.

Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a

patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding.

Available in black factory direct and in other colors only through licensed SAGE resellers.

989.739.7000 www.sageinternationalltd.com [email protected] M1 GARAND ENHANCED B ENHANCED GARAND M1 RIFL BATTLE ENHANCED

PRODUCT SPECIFICATIONS

*SHOWN AS STANDARD MODEL

ATTLE RIFLE CHASSIS CHASSIS RIFLE ATTLE

MODEL M1GALCS/CV DETAILS

OVERALL LENGTH N/A - NO BUTT STOCK INCLUDED COLLAPSED The M1GALCS/CV Enhanced Battle Rifle Chassis Stock System is OVERALL LENGTH 34.25” (87.00 CM) precision CNC machined from a solid EXTENDED SYSTEMS CHASSIS E billet of high strength aircraft grade WEIGHT 4.0 LBS (1.81 KG) aluminum. Fits Mil-Spec M1 Garand LENGTH OF PULL N/A - NO BUTT STOCK INCLUDED rifles with standard length barrels. COLLAPSED LENGTH OF PULL N/A - NO BUTT STOCK INCLUDED The M1GALCS/CV is a drop-in chassis EXTENDED and features a Mil-Spec five position FINISH MIL-SPEC HARD ANODIZE M4 receiver extension tube and a TangoDown® BATTLEGRIP®. GRIP TANGODOWN® GRIP ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP ambidextrous sling mounts, a All Specifications are Averages and Subject to Change removable Kydex forend with a built in palm swell. SYSTEM * Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate the need for additional bedding.

Available in black factory direct and in other colors only through licensed

SAGE resellers.

989.739.7000 www.sageinternationalltd.com [email protected] RIFL BATTLE ENHANCED

M1 GARAND ENHANCED B ENHANCED GARAND M1

PRODUCT SPECIFICATIONS

*SHOWN AS STANDARD MODEL

ATT MODEL M1GALCS/CVFS DETAILS

OVERALL LENGTH N/A – BUTT STOCK DOES NOT COLLAPSE COLLAPSED The M1GALCS/CVFS Enhanced Battle Rifle Chassis Stock System is SYS CHASSIS RIFLE LE OVERALL LENGTH 39.50 (100.33 CM) precision CNC machined from a solid billet of high strength aircraft grade SYSTEMS CHASSIS E WEIGHT 5.5 LBS (2.50 KG) aluminum. Fits Mil-Spec M1 Garand LENGTH OF PULL N/A – BUTT STOCK DOES NOT COLLAPSE rifles with standard length barrels. COLLAPSED LENGTH OF PULL 15” (38.10 CM) The M1GALCS/CVFS is a drop-in EXTENDED chassis and features an all-weather FINISH MIL-SPEC HARD ANODIZE fiberglass reinforced synthetic monte- carlo butt stock with an integral grip GRIP INTEGRAL SYNTHETIC GRIP and rubber recoil pad. ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE Additionally the chassis includes four WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP Mil-Spec 1913 Picatinny rails, three All Specifications are Averages and Subject to Change ambidextrous sling mounts, a removable Kydex forend with a built in * Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles palm swell. may require additional gunsmithing. Rigidity of the chassis increases

accuracy and reliability and is TEM achieved through the use of a patented replacement operating rod guide block. Precision machined

receiver lug recesses also eliminate the need for additional bedding.

Available in a black factory direct and in other colors only through licensed SAGE resellers.

989.739.7000 www.sageinternationalltd.com [email protected] M1 GARAND ENHANCED B ENHANCED GARAND M1 RIFL BATTLE ENHANCED

PRODUCT SPECIFICATIONS

*SHOWN AS STANDARD MODEL

ATTLE RIFLE CHASSIS CHASSIS RIFLE ATTLE

MODEL M1GALCS/CV16FS DETAILS

OVERALL LENGTH N/A – BUTT STOCK DOES NOT COLLAPSE COLLAPSED The M1GALCS/CV16FS Enhanced Battle Rifle Chassis Stock System is OVERALL LENGTH 39.50 (100.33 CM) EXTENDED precision CNC machined from a solid billet of high strength aircraft grade SYSTEMS CHASSIS E WEIGHT 5.5 LBS (2.50 KG) aluminum. Fits Mil-Spec M1 Garand LENGTH OF PULL N/A – BUTT STOCK DOES NOT COLLAPSE rifles with standard length barrels. COLLAPSED LENGTH OF PULL 15” (38.10 CM) The M1GALCS/CV16FS is a drop-in EXTENDED chassis and features an all-weather, FINISH MIL-SPEC HARD ANODIZE non-adjustable, synthetic M16 butt stock. GRIP ERGO® GRIP ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP ambidextrous sling mounts, a All Specifications are Averages and Subject to Change removable Kydex forend with a built in

palm swell. SYSTEM * Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles may require additional gunsmithing. Rigidity of the chassis increases accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined

receiver lug recesses also eliminate the need for additional bedding.

Available in black factory direct and in

other colors only through licensed

SAGE resellers.

989.739.7000 www.sageinternationalltd.com [email protected] M1 GARAND ENHANCED B ENHANCED GARAND M1 RIFL BATTLE ENHANCED

PRODUCT SPECIFICATIONS

*SHOWN AS STANDARD MODEL

ATTLE RIFL ATTLE

MODEL M1GALCS/PMRI DETAILS

OVERALL LENGTH 36.75” (93.35 CM) COLLAPSED The M1GALCS/PMRI Enhanced Battle Rifle Chassis Stock System is OVERALL LENGTH 38.25” (97.16 CM) EXTENDED precision CNC machined from a solid billet of high strength aircraft grade SYSTEMS CHASSIS E WEIGHT 5.6 LBS (2.54 KG) aluminum. Fits Mil-Spec M1 Garand LENGTH OF PULL 13” (33.00 CM) rifles with standard length barrels. COLLAPSED

E CHASSIS SYSTEM CHASSIS E LENGTH OF PULL 14.5” (36.83 CM) The M1GALCS/PMRI is a drop-in EXTENDED chassis and features an adjustable FINISH MIL-SPEC HARD ANODIZE MAGPUL® PRS2® butt stock.

* Fitting SAGE EBR chassis to non Mil-Spec/Commercial rifles Rigidity of the chassis increases may require additional gunsmithing. accuracy and reliability and is achieved through the use of a patented replacement operating rod guide block. Precision machined receiver lug recesses also eliminate

the need for additional bedding.

Available in a black factory direct and in other colors only through licensed

SAGE resellers.

989.739.7000 www.sageinternationalltd.com [email protected] RIFL BATTLE ENHANCED

MINI

- PRODUCT SPECIFICATIONS 14

CHASSIS

STOCK SYSTEM STOCK

MODEL MINIALCS/CV DETAILS

OVERALL LENGTH N/A - NO BUTT STOCK INCLUDED COLLAPSED The MINIALCS/CV Enhanced Battle Rifle Chassis Stock System is OVERALL LENGTH 25.5” (64.8 CM) precision CNC machined from a solid billet of high strength aircraft grade SYSTEMS CHASSIS E WEIGHT 3.1 LBS (1.40 KG) aluminum. Fits Ruger Mini-14®

LENGTH OF PULL N/A - NO BUTT STOCK INCLUDED Autoloading Rifles. COLLAPSED LENGTH OF PULL N/A - NO BUTT STOCK INCLUDED The MINIALCS/CV is a drop-in chassis EXTENDED and features a Mil-Spec five position FINISH MIL-SPEC HARD ANODIZE M4 receiver extension tube and a soft ERGO® Grip. GRIP ERGO® GRIP ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP ambidextrous sling mounts, a All Specifications are Averages and Subject to Change removable Kydex forend with a built in palm swell. * Not compatible with the Mini-30®, or the 180 series of the Mini-14®. Mini-14® is a registered trademark of Sturm, Ruger Rigidity of the chassis increases & Co. accuracy and reliability and is achieved through the use of barrel tension adjustment screws. Precision machined receiver lug recesses also eliminate the need for additional bedding.

Available in black factory direct and in other colors/variations only through licensed SAGE resellers.

989.739.7000 www.sageinternationalltd.com [email protected] MINI RIFL BATTLE ENHANCED

- 14 PRODUCT SPECIFICATIONS ®

CHASSIS

STOCK SYSTEM STOCK

MODEL MINIALCS/CVFS DETAILS

OVERALL LENGTH N/A – BUTT STOCK DOES NOT COLLAPSE COLLAPSED The MINIALCS/CVFS Enhanced Battle Rifle Chassis Stock System is OVERALL LENGTH 30.5” (77.5 CM) EXTENDED precision CNC machined from a solid billet of high strength aircraft grade SYSTEMS CHASSIS E WEIGHT 3.4 LBS (1.54 KG)

aluminum. Fits Ruger Mini-14®

LENGTH OF PULL N/A – BUTT STOCK DOES NOT COLLAPSE Autoloading Rifles. COLLAPSED LENGTH OF PULL 15” (38.10 CM) The MINIALCS/CVFS is a drop-in EXTENDED chassis and features a Mil-Spec five FINISH MIL-SPEC HARD ANODIZE position M4 receiver extension tube and a soft ERGO® Grip. GRIP ERGO® GRIP ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP ambidextrous sling mounts, a All Specifications are Averages and Subject to Change removable Kydex forend with a built in palm swell. * Not compatible with the Mini-30®, or the 180 series of the Mini-14®. Mini-14® is a registered trademark of Sturm, Ruger Rigidity of the chassis increases & Co. accuracy and reliability and is achieved through the use of barrel tension adjustment screws. Precision machined receiver lug recesses also eliminate the need for additional bedding.

Available in black factory direct and in

other colors/variations only through

licensed SAGE resellers.

989.739.7000 www.sageinternationalltd.com [email protected] MINI RIFL BATTLE ENHANCED

- 14 PRODUCT SPECIFICATIONS ®

CHASSIS

STOCK SYSTEM STOCK

MODEL MINIALCS/CV16FS DETAILS

OVERALL LENGTH N/A – BUTT STOCK DOES NOT COLLAPSE COLLAPSED The MINIALCS/CV16FS Enhanced Battle Rifle Chassis Stock System is OVERALL LENGTH 30.5” (77.5 CM) EXTENDED precision CNC machined from a solid billet of high strength aircraft grade CHAS E WEIGHT 3.4 LBS (1.54 KG)

aluminum. Fits Ruger Mini-14® LENGTH OF PULL N/A – BUTT STOCK DOES NOT COLLAPSE Autoloading Rifles. COLLAPSED LENGTH OF PULL 15” (38.10 CM) The MINIALCS/CV16FS is a drop-in EXTENDED chassis and features an all-weather, FINISH MIL-SPEC HARD ANODIZE non-adjustable, synthetic M16 butt stock and a soft ERGO® Grip. GRIP ERGO® GRIP

SIS SYSTEMS SIS ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE Additionally the chassis includes four Mil-Spec 1913 Picatinny rails, three WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP ambidextrous sling mounts, a All Specifications are Averages and Subject to Change removable Kydex forend with a built in palm swell. * Not compatible with the Mini-30®, or the 180 series of the Mini-14®. Mini-14® is a registered trademark of Sturm, Ruger Rigidity of the chassis increases & Co. accuracy and reliability and is achieved through the use of barrel tension adjustment screws. Precision machined receiver lug recesses also eliminate the need for additional bedding.

Available in black factory direct and in

other colors/variations only through

licensed SAGE resellers.

989.739.7000 www.sageinternationalltd.com [email protected] CA TACTICAL ENHANCED

M1 CARBINE CHASSIS S CHASSIS CARBINE M1

PRODUCT SPECIFICATIONS

* SHOWN WITH OPTIONAL EXTRAS, RIFLE NOT INCLUDED

YSTEM

MODEL M1CALCS/CV DETAILS

OVERALL LENGTH N/A – NO BUTT STOCK INCLUDED COLLAPSED The M1CALCS/CV Enhanced Battle Rifle Chassis Stock System is OVERALL LENGTH 26” (66.04 CM) precision CNC machined from a solid

billet of high strength aircraft grade WEIGHT 2.4 LBS (1.08 KG)

aluminum. Fits Mil-Spec M1 Carbine RBINE LENGTH OF PULL N/A – NO BUTT STOCK INCLUDED Autoloading Rifles. COLLAPSED LENGTH OF PULL N/A – NO BUTT STOCK INCLUDED The M1CALCS/CV is a drop-in chassis EXTENDED and features a Mil-Spec five position FINISH MIL-SPEC HARD ANODIZE M4 receiver extension tube and a soft ERGO® Grip. GRIP ERGO® GRIP

ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE Additionally the chassis includes four CHASSIS Mil-Spec 1913 Picatinny rails, dual WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP push button rear sling studs, and 360° All Specifications are Averages and Subject to Change ventilation cuts to help dissipate heat.

Rigidity of the chassis increases accuracy and reliability and is achieved through the use of barrel tension adjustment screws. Precision machined receiver lug recesses also

eliminate the need for additional bedding.

Available in black factory direct and in other colors/variations only through licensed SAGE resellers.

989.739.7000 www.sageinternationalltd.com [email protected] ENHANCED

SKS CHASSIS CHASSIS SKS

PRODUCT SPECIFICATIONS

STOCK STOCK

SKS

CHASSIS

SYSTEM

* SHOWN WITH OPTIONAL EXTRAS, RIFLE NOT INCLUDED

MODEL SKSCS/CV DETAILS

OVERALL LENGTH N/A – NO BUTT STOCK INCLUDED COLLAPSED The SKSCS/CV Enhanced Battle Rifle Chassis Stock System is precision

OVERALL LENGTH 30.50” (77.5 CM) CNC machined from a solid billet of high strength aircraft grade aluminum. WEIGHT 2.3 LBS (1.0 KG) Fits all factory original SKS rifles.

LENGTH OF PULL N/A – NO BUTT STOCK INCLUDED COLLAPSED The SKSCS/CV is a drop-in chassis LENGTH OF PULL N/A – NO BUTT STOCK INCLUDED and features a Mil-Spec five position EXTENDED M4 receiver extension tube and a soft FINISH MIL-SPEC HARD ANODIZE ERGO® Grip.

GRIP ERGO® GRIP Ventilation cuts in the chassis and ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE hand-guard help to quickly dissipate heat. Option tri-rail kit is available for WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP quickly mounting accessories. All Specifications are Averages and Subject to Change Rigidity of the chassis increases accuracy and reliability. Eliminates the need for additional bedding.

Available in black factory direct and in other colors/variations only through licensed SAGE resellers.

989.739.7000 www.sageinternationalltd.com [email protected] EQ & ACCESSORIES EBR

ACCESSORIES & EQUIPM & ACCESSORIES

ENT

UIPMENT EBR ACCESSORIES & EQUIPMENT

ALL VARIANTS

SIGHT BASE SIGHT EQ & ACCESSORIES EBR

PRODUCT SPECIFICATIONS

*SHOWN WITH OPTIONAL EXTRAS – RIFLE & CHASSIS NOT INCLUDED

MODEL M14SCSB DETAILS

RAIL LENGTH 1.00” (2.54 CM) The M14SCSB (Stripper Clip Sight Base) is a 1913 Picatinny Rail insert OVERALL LENGTH 1.25” (3.18 CM) specifically designed for use on Mil- Spec M1/M14 rifles that are installed in UIPMENT OVERALL HEIGHT .45” (1.13 CM) a SAGE M14 EBR Chassis Stock Systems. WEIGHT .1 LBS (.05 KG)

FINISH BLACK NITRIDE The M14SCSB is precision machined from ordnance grade steel and ACCESSORIES NOT APPLICABLE replaces the existing factory stripper WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP clip guide. The base permits in-line mounting of scoped optics and All Specifications are Averages and Subject to Change accessories.

The M14SCSB shape also allows clear

M1/M14 STRIPPER CLIP STRIPPER M1/M14 through access to the ejection port.

Includes a stainless steel set screw and installation does not require any permanent modifications to the rifle or sight base.

The SAGE M14SCSB is NOT designed to align with other NON-SAGE chassis stock systems.

Fitting SAGE M14SCSB to non Mil- Spec/Commercial rifles may require additional gunsmithing.

989.739.7000 www.sageinternationalltd.com [email protected] EQ & ACCESSORIES EBR

M1/M14 DETACHABLE CA DETACHABLE M1/M14

PRODUCT SPECIFICATIONS

BAS SIGHT NTILEVERED MODEL M14DCSB DETAILS

RAIL LENGTH 6.75” (17.15 CM) The M14DCSB (Detachable Cantilevered Sight Base) is a precision OVERALL LENGTH 9.75” (24.76 CM) CNC machined, aluminum removable 1913 Picatinny Rail sight base. Fits all UIPMENT OVERALL HEIGHT .85” (2.16 CM) SAGE M14 EBR Chassis Stock Systems. WEIGHT .5 LBS (.22 KG)

FINISH MIL-SPEC HARD ANODIZE The M14DCSB completely bridges the M14 action back to the rear sight and ACCESSORIES ADDITIONAL ACCESSORIES ARE AVAILABLE is fully adjustable for oversized or WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP undersized rails. It features a positive cam locking mechanism that allows All Specifications are Averages and Subject to Change rail surfaces to be engaged by flat

non-scuffing pads.

Additionally the sight base is fully supported on both ends, providing

superior rigidity and reliable re- E zeroing of optics.

Includes an all steel construction stripper clip insert with a stainless steel set screw and a stainless steel base adjustment screw to stop vertical and lateral shifting. M14DCSB installation requires no modifications to the rifle or sight base.

Available in black factory direct and in other colors only through licensed SAGE resellers.

989.739.7000 www.sageinternationalltd.com [email protected] EQ & ACCESSORIES EBR

M1/M14 VERTICAL FORE VERTICAL M1/M14

PRODUCT SPECIFICATIONS

GRIP

MODEL M14VFG DETAILS

MATERIAL HARD PLASTIC The M14VFG (Vertical Fore-Grip) is specifically designed for use on OVERALL WIDTH 1.25” (3.18 CM) AT WIDEST POINT M1/M14, M1 GARAND, & MINI-14/30® SAGE EBR Chassis Stock Systems. UIPMENT OVERALL HEIGHT 4.5” (11.43 CM) The M14VFG attaches to the underside WEIGHT .4 LBS (.18 KG) of an EBR Stock via a knurled thumb- COLOR BLACK type screw and is secured by an integral guide pin. WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP All Specifications are Averages and Subject to Change Constructed using the highest quality materials, the M14VFG is lightweight and extremely durable. The M14VFG

provides additional control during rapid fire and can be removed easily and quickly by adjusting the threaded core.

Not designed to be used with other manufacturers chassis systems or stocks.

989.739.7000 www.sageinternationalltd.com [email protected] EQ & ACCESSORIES EBR

M1/M14 ADAPTER PICAT ADAPTER M1/M14

PRODUCT SPECIFICATIONS

*DOES NOT INCLUDE RIFLE OR CHASSIS

SECTION RAIL INNY

MODEL M14APRS DETAILS

MATERIAL ALUMINUM The M14APRS (Adapter Picatinny Rail Section) is specifically designed for OVERALL LENGTH 2” (5.08 CM) use on M1/M14, M1 GARAND, & MINI- 14/30® SAGE EBR Chassis Stock UIPMENT OVERALL HEIGHT .40” (1.02 CM) Systems.

WEIGHT .8 OZ (.02 KG) The M14APRS attaches to the FINISH HARD ANODIZE underside of an EBR Stock via two screws and facilitates the mounting of WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP aftermarket vertical fore-grips without All Specifications are Averages and Subject to Change removing the protective Kydex forearm.

Precision machined from aircraft grade aluminum and finished with Mil-Spec hard anodizing.

The M14APRS is also movable forward and aft four (4) positions to allow for further range of fore- grip placement. Fits same hole pattern as the SAGE M14VFG. Includes two (2) mounting screws.

989.739.7000 www.sageinternationalltd.com [email protected] EQ & ACCESSORIES EBR

M1/M14 ERGO GRIP ERGO M1/M14

PRODUCT SPECIFICATIONS

MODEL M14ERGO DETAILS

MATERIAL TEXTURED RUBBER AND PLASTIC The M14ERGO is a soft textured pistol grip specifically designed for use on OVERALL WIDTH 1.25” (3.18 CM) AT WIDEST POINT MOD -0 style M1/M14 & M1 GARAND

UIPMENT OVERALL HEIGHT 4.5” (11.43 CM) SAGE EBR Chassis Stock Systems.

WEIGHT .2 LBS (.09 KG) Manufactured to SAGE EBR specifications for the proper function COLOR BLACK OR TAN (PLEASE SPECIFY) of the MOD-0 telescoping stock, the WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP M14ERGO will not function with other All Specifications are Averages and Subject to Change manufacturers chassis systems or stocks.

The M14ERGO replaces the old style EBR hard plastic grip. Features ergonomically correct finger grooves and is virtually impervious to oils/solvents.

Textured finish offer operators better control and features a bottom storage with tethered rubber plug.

Ambidextrous design. Not designed for use with other manufacturers chassis systems or stocks. Only available from SAGE or authorized SAGE resellers/distributors.

989.739.7000 www.sageinternationalltd.com [email protected] EQ & ACCESSORIES EBR

M1/M14 FULL AUTO CUT AUTO FULL M1/M14

PRODUCT SPECIFICATIONS

OUT COVER OUT

MODEL M14FACC DETAILS

MATERIAL ALUMINUM The M14FACC (Full Auto Cut-Out Cover) is specifically designed to OVERALL LENGTH 1.85” (4.70 CM) fill the full auto selector clearance UIPMENT OVERALL HEIGHT .65” (1.65 CM) AT TALLEST POINT cut on M1/M14 SAGE EBR Chassis

WEIGHT .2 OZ (.005 KG) Stock Systems.

COLOR BLACK The M14FACC is precision CNC FINISH HARD ANODIZE machined from billet aircraft grade

WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP aluminum and is finished in a hard anodize. All Specifications are Averages and Subject to Change

Prevents dirt & debris from entering action and features two upper guide pins to prevent shifting while installed in the chassis system.

Manufactured to SAGE EBR specifications and is not compatible with other M1/M14 stock systems.

Only available from SAGE or authorized SAGE resellers/distributors.

989.739.7000 www.sageinternationalltd.com [email protected] EQ & ACCESSORIES EBR

M1/M14 BUTTSTOCK EXT BUTTSTOCK M1/M14

PRODUCT SPECIFICATIONS

KIT ENSION MODEL M14BEK DETAILS

MATERIAL ALUMINUM The M14BEK (Buttstock Extension Kit) is a one inch (1") buttstock OVERALL WIDTH 1” (2.54 CM) extension kit that is specifically UIPMENT OVERALL HEIGHT 4.12” (10.46 CM) designed for use on MOD-0 style

WEIGHT .2 LBS (.09 KG) M1/M14 & M1 GARAND SAGE EBR Chassis Stock Systems. COLOR BLACK

FINISH HARD ANODIZE The M14BEK is precision CNC

WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP machined from billet aircraft grade aluminum and is finished in a hard All Specifications are Averages and Subject to Change anodize.

Replaces the factory buttplate intermediate spacer (Part #90911) and increases the length of pull by one inch (1”). Does not interfere with adjustable cheek rest function.

Only available from SAGE or authorized SAGE resellers/distributors.

Includes mounting hardware.

989.739.7000 www.sageinternationalltd.com [email protected] EBR

M1/M14 VERTICAL ADJU VERTICAL M1/M14

PRODUCT SPECIFICATIONS EQUIPM & ACCESSORIES

EXT BUTTSTOCK STABLE

MODEL M14VABEK/ALCS DETAILS

MATERIAL ALUMINUM The M14VABEK/ALCS (Vertical Adjustable Buttstock Extension OVERALL WIDTH 1.25” (3.18 CM) AT WIDEST POINT Kit) is a 1.5" buttstock extension kit that is specifically designed for OVERALL HEIGHT 5.25” (13.33 CM) use on MOD-0 style M1/M14 & M1 WEIGHT .4 LBS (.18 KG) GARAND SAGE EBR Chassis Stock Systems. COLOR BLACK

FINISH HARD ANODIZE The M14VABEK/ALCS is precision ENT WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP CNC machined from billet aircraft grade aluminum and is finished in All Specifications are Averages and Subject to Change a hard anodize.

Replaces the factory buttplate intermediate spacer (Part #90911) and increases the length of pull by

1.5”. Does not interfere with KIT ENSION adjustable cheek rest function.

Also allows for 1.5” of vertical buttplate adjustment.

Only available from SAGE or authorized SAGE resellers/distributors.

Includes mounting hardware.

989.739.7000 www.sageinternationalltd.com [email protected] EQ & ACCESSORIES EBR

M1/M14 VERTICAL ADJU VERTICAL M1/M14

PRODUCT SPECIFICATIONS

*RIFLE AND CHASSIS NOT INCLUDED EXT BUTTSTOCK STABLE

MODEL M14VABEK/PMRI DETAILS

MATERIAL ALUMINUM The M14VABEK/PMRI (Vertical Adjustable Buttstock Extension OVERALL LENGTH 1.5” (3.8 CM) Kit) is a 1.5" buttstock extension

UIPMENT OVERALL HEIGHT 4.75” (12.06 CM) kit that is specifically designed for use on PMRI style M1/M14 & M1 WEIGHT .4 LBS (.18 KG) GARAND SAGE EBR Chassis COLOR BLACK Stock Systems.

FINISH HARD ANODIZE The M14VABEK/PMRI is precision WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP CNC machined from billet aircraft grade aluminum and is finished in All Specifications are Averages and Subject to Change a hard anodize.

Replaces the factory buttplate intermediate spacer (Part #90911) and increases the length of pull by

1.5”. Does not interfere with KIT ENSION adjustable cheek rest function.

Also allows for 1.5” of vertical buttplate adjustment.

Only available from SAGE or authorized SAGE resellers/distributors.

Includes mounting hardware.

989.739.7000 www.sageinternationalltd.com [email protected] EQ & ACCESSORIES EBR

M1/M14 TELESCOPING B TELESCOPING M1/M14

PRODUCT SPECIFICATIONS

(MOD UTTSTOCK

MODEL M14ALCS-BS DETAILS

MATERIAL ALUMINUM & STEEL The M14ALCS-BS is a complete telescoping buttstock conversion LENGTH OF PULL 15” (38.1 CM) EXTENDED kit that is specifically designed for

UIPMENT LENGTH OF PULL use on M1/M14 & M1 GARAND 9” (22.86 CM) COLLAPSED SAGE EBR Chassis Stock WEIGHT 2.4 LBS (1.08 KG) Systems.

COLOR BLACK (ADDITIONAL COLORS VARY) Converts EBR stocks to ALCS FINISH HARD ANODIZE & BLACK NITRIDE (MOD-0) style. Telescoping design GRIP ERGO® GRIP provides six (6) length positions.

Adjustable cheek rest has two O) WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP inches (2") of travel in one quarter

All Specifications are Averages and Subject to Change inch (.25") increments.

Features a self stowing tensioning wrench to securely lock cheek rest into position. Aluminum parts are Mil-Spec hard anodize & all steel components are black nitride finished.

Only available from SAGE or authorized SAGE resellers/distributors.

Includes mounting hardware and sling plate.

989.739.7000 www.sageinternationalltd.com [email protected] EQ & ACCESSORIES EBR

M1/M14 FIXED SYNTHET FIXED M1/M14

PRODUCT SPECIFICATIONS

BU IC

MODEL M14ALCS/CVFS-BS DETAILS

MATERIAL SYNTHETIC PLASTIC The M14ALCS/CVFS-BS is a synthetic fixed buttstock TTSTOCK OVERALL LENGTH 13.75” (34.92 CM) conversion kit that is specifically UIPMENT OVERALL HEIGHT 5” (12.7 CM) AT TALLEST POINT designed for use on M1/M14 & M1

WEIGHT 1.4 LBS (.63 KG) GARAND SAGE EBR Chassis Stock Systems. COLOR BLACK

GRIP INTEGRAL SEMI-PISTOL GRIP

Converts EBR stocks to

WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP ALCS/CVFS (fixed stock) style. All weather fiberglass reinforced All Specifications are Averages and Subject to Change synthetic stock features scratch- resistant finish that resists wear.

Features a Monte-Carlo style cheek rest and checkered integral semi- pistol grip. Includes 1" rubber recoil pad & double front sling loop plate.

Only available from SAGE or an authorized SAGE resellers/distributors.

Includes mounting hardware and sling plate.

989.739.7000 www.sageinternationalltd.com [email protected] EQ & ACCESSORIES EBR

M1/M14 PMRI BUTTSTOC PMRI M1/M14

PRODUCT SPECIFICATIONS

MODEL M14ALCS/PMRI-BS DETAILS

MATERIAL ALUMINUM The M14ALCS/PMRI-BS is 13” (33.02 CM) 14.5” (36.83 CM) MAGPUL® PRS2™ butt stock OVERALL LENGTH COLLAPSED EXTENDED conversion kit that is specifically UIPMENT OVERALL HEIGHT 6.25” (15.87 CM) DOWN 8” (20.32 CM) UP designed for use on M1/M14 & M1 GARAND SAGE EBR Chassis WEIGHT 2.7 LBS (1.22 KG) Stock Systems. Assembly consists COLOR BLACK of sling plate attachment, MAGPUL® PRS2™ butt stock, GRIP INTEGRAL SEMI-PISTOL GRIP ERGO grip, and mounting WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP hardware.

All Specifications are Averages and Subject to Change Converts EBR stocks to ALCS/PMRI (MOD-2) style. Features an adjustable machined butt-plate, steel adjustment shafts, and machined adjustment knobs with positive-locking detents.

Stock also includes an adjustable cheek rest and rubber recoil pad.

Only available from SAGE or an authorized SAGE resellers/distributors.

Includes mounting hardware and sling plate.

989.739.7000 www.sageinternationalltd.com [email protected] EQ & ACCESSORIES EBR

M1/M14 PMRI PICATINN PMRI M1/M14

PRODUCT SPECIFICATIONS

RAIL Y *SHOWN WITH OPTIONAL EXTRAS

MODEL PMRI-MR DETAILS

MATERIAL ALUMINUM The PMRI-MR is Picatinny rail

specifically designed for monopod OVERALL LENGTH 4” (10.16 CM) or sling mounting on MAGPUL® UIPMENT WEIGHT .1 LBS (.05 KG) PRS2™ stock systems. COLOR BLACK The PMRI-MR is precision CNC FINISH HARD ANODIZE machined from billet aircraft grade WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP aluminum and is finished in a hard All Specifications are Averages and Subject to Change anodize.

Only available from SAGE or

authorized SAGE resellers/distributors.

Includes mounting hardware.

989.739.7000 www.sageinternationalltd.com [email protected] EQ & ACCESSORIES EBR

M1/M14 PMRI PICATINN PMRI M1/M14

PRODUCT SPECIFICATIONS

RAIL Y *SHOWN WITH OPTIONAL EXTRAS

MODEL PMRI-FR DETAILS

MATERIAL ALUMINUM The PMRI-FR is Picatinny rail

specifically designed for sling and OVERALL LENGTH 4” (10.16 CM) accessory mounting on MAGPUL® UIPMENT WEIGHT .1 LBS (.05 KG) PRS2™ stock systems. COLOR BLACK The PMRI-FR is precision CNC FINISH HARD ANODIZE machined from billet aircraft grade WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP aluminum and is finished in a hard All Specifications are Averages and Subject to Change anodize.

Only available from SAGE or

authorized SAGE resellers/distributors.

Includes mounting hardware.

989.739.7000 www.sageinternationalltd.com [email protected] ALL VARIANTS ALL STOCKS SHOTGUN

SHOTGUN STOCKS ALL VARIANTS

STOCKS SHOTGUN

870 TELESCOPING SHOT TELESCOPING 870

PRODUCT SPECIFICATIONS

STOCK GUN

MODEL TS870R DETAILS

LENGTH OF PULL 14.25” (36.19 CM) EXTENDED The TS870R is a telescoping LENGTH OF PULL shotgun stock made for standard 8.25” (20.95 CM) COLLAPSED 12 gauge Remington® 870 WEIGHT 2.6 LBS (1.17 KG) shotguns. FINISH BLACK NITRIDE The stock is all steel construction GRIP ERGO® GRIP and features a soft textured WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP ERGO® grip and 1” soft rubber All Specifications are Averages and Subject to Change recoil pad.

Quickly installs via a replacement receiver extension and stock bolt.

Only available from SAGE or authorized SAGE resellers/distributors.

Includes mounting hardware.

989.739.7000 www.sageinternationalltd.com [email protected] STOCKS SHOTGUN

870 TELESCOPING SHOT TELESCOPING 870

PRODUCT SPECIFICATIONS

STOCK GUN

MODEL TS880RLW DETAILS

LENGTH OF PULL 15” (38.1 CM) EXTENDED The TS880RLW is a lightweight LENGTH OF PULL telescoping shotgun stock made 9” (22.86 CM) COLLAPSED for standard 12 gauge Remington® WEIGHT 1.8 LBS (.82 KG) 870 shotguns. FINISH HARD ANODIZE The stock is aluminum GRIP ERGO® GRIP construction and features a soft WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP textured ERGO® grip and 1” soft All Specifications are Averages and Subject to Change rubber recoil pad.

Quickly installs via a replacement receiver extension and stock bolt.

Only available from SAGE or authorized SAGE resellers/distributors.

Includes mounting hardware.

989.739.7000 www.sageinternationalltd.com [email protected] STOCKS SHOTGUN

870 SHOTGUN STOCK SHOTGUN 870

PRODUCT SPECIFICATIONS

*TSAR-1 NOT SHOWN

MODEL TSAR-1 TSAR-2 DETAILS

LENGTH OF PULL 14.25” (36.20 CM) EXTENDED 10.75” (27.30 CM) MOE® STOCK The TSAR is a collapsible shotgun LENGTH OF PULL NO STOCK stock made for standard 12 gauge 11” (27.94 CM) COLLAPSED Remington® 870 shotguns. WEIGHT 1.0 LBS (.45 KG) 1.4 LBS (.64 KG)

FINISH HARD ANODIZE The stock is aluminum construction and features a soft GRIP ERGO® GRIP textured ERGO® grip and 1” soft WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP rubber recoil pad. All Specifications are Averages and Subject to Change Quickly installs via a replacement receiver extension and stock bolt.

The TSAR-2 features a MAGPUL® MOE® stock. The TSAR-1 features a Mil-Spec M4 tube to allow operators to mount their own butt stock.

Only available from SAGE or authorized SAGE resellers/distributors.

Includes mounting hardware.

989.739.7000 www.sageinternationalltd.com [email protected] STOCKS SHOTGUN

500 SHOTGUN STOCK SHOTGUN 500

PRODUCT SPECIFICATIONS

*TSAM-1 NOT SHOWN

MODEL TSAM-1 TSAM-2 DETAILS

LENGTH OF PULL 15” (38.10 CM) EXTENDED 11.5” (29.21 CM) The TSAM is a collapsible shotgun LENGTH OF PULL NO STOCK stock made for standard 12 gauge 11.5” (29.21 CM) COLLAPSED Mossberg® 500 shotguns. WEIGHT 1.0 LBS (.45 KG) 1.4 LBS (.64 KG)

The TSAM-2 features a MAGPUL® MOE® stock. The TSAM-1 features a Mil-Spec M4 tube to allow operators to mount their own butt stock.

Only available from SAGE or authorized SAGE resellers/distributors.

Includes mounting hardware.

989.739.7000 www.sageinternationalltd.com [email protected] ALL VARIANTS ALL ACCESSORIES SHOTGUN

SHOTGUN ACCESSORIES ALL VARIANTS

ACCESSORIES SHOTGUN

870 MAGAZINE EX MAGAZINE 870

PRODUCT SPECIFICATIONS

TENSION TUBE KITS TUBE TENSION

MODEL MET6/870 MET7/870 MET8/870 DETAILS

CAPACITY 6 ROUNDS 7 ROUNDS 8 ROUNDS SAGE MET (Magazine Extension Tube) Kits are manufactured for BARREL LENGTH 14.5” 18” 20” standar d frame 12 gauge

FINISH BLACK NITRIDE Remington® 870 shotguns.

WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP They are available in three (3) All Specifications are Averages and Subject to Change sizes:

 Six Shot Capacity  Seven Shot Capacity  Eight Shot Capacity (Includes one round in chamber).

Each kit contains a coupler, spring, magazine tube extension and barrel/magazine tube clamp.

Only available from SAGE or authorized SAGE resellers/distributors.

Includes mounting hardware.

989.739.7000 www.sageinternationalltd.com [email protected] CA TACTICAL ENHANCED

BATTLECLAMP BATTLECLAMP

PRODUCT SPECIFICATIONS

–

CLAMP BARREL

MODEL DESCRIPTION DETAILS

STBC BATTLECLAMP – BARREL CLAMP The Sage BATTLECLAMP Barrel MATERIAL ALUMINUM Clamp secures magazine extension

tube kits and allows numerous CHASSIS RBINE WEIGHT 3.3 OZ (0.09 KG) accessories to be mounted easily FINISH HARD ANODIZE and quickly.

WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP Accepts most 1” diameter weapon All Specifications are Averages and Subject to Change lights. The STBC is reversible and features a single point button sling cup and a 1.5" MIL-STD 1913 Picatinny rail for mounting additional accessories.

Blackened stainless steel Allen head screws bring the clamp halves together.

Fits Remington 870, 1100, 11-87 and Benelli M1, M2, M4, M1014, 12 gauge

shotguns.

989.739.7000 www.sageinternationalltd.com [email protected] ACCESSORIES SHOTGUN

SHOTGUN SHOTGUN

PRODUCT SPECIFICATIONS

MUZZLE HAND GUARDS HAND MUZZLE

MHGISR / MSGISL

PSMHG / SSMHG

*SHOWN WITH OPTIONAL EXTRAS

MODEL DESCRIPTION DETAILS

PSMHG PLAIN STEEL MUZZLE HAND GUARD The SAGE MHGISL is a combination Hand Guard and Side Sling for left SSMHG STAINLESS STEEL MUZZLE HAND GUARD handed shooters.

MHGISL PLAIN STEEL MUZZLE HAND GUARD – LEFT HAND The SAGE MHGISR is a combination Hand Guard and Side Sling for right MHGISR PLAIN STEEL MUZZLE HAND GUARD – RIGHT HAND handed shooters.

WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP The MHGISL and the MHGISR muzzle All Specifications are Averages and Subject to Change hand guards are made of plain steel and feature a black nitride finish. Fits 12 gauge Remington® 870, 1100 & 11-87 shotguns.

The SAGE PSMHG is a plain steel Muzzle Hand-Guard with a bottom sling loop and a black nitride finish.

The SAGE SSMHG is a stainless steel Muzzle Hand-Guard with a bottom sling loop. Fits 12 gauge Remington® 870, 1100 & 11-87 shotguns.

Only available from SAGE or authorized SAGE resellers/distributors.

989.739.7000 www.sageinternationalltd.com [email protected] ACCESSORIES SHOTGUN

SHOTGUN SLING FITTIN SLING SHOTGUN

PRODUCT SPECIFICATIONS

GS *SHOWN WITH OPTIONAL EXTRAS

DETAILS

MODEL DESCRIPTION

SSR870R FRONT OFFSET SLING ATTACHMENT – RIGHT HAND The SSR870R and SSR870L are offset SSR870L FRONT OFFSET SLING ATTACHMENT – LEFT HAND shotgun sling fittings. Fits 12 gauge Remington® 870 shotguns and can be SSM590R FRONT OFFSET SLING ATTACHMENT – RIGHT HAND used with a variety of SureFire® forend lights. SSM590L FRONT OFFSET SLING ATTACHMENT – LEFT HAND

WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP The SSM590R and SSM590L are offset shotgun sling fittings. Fits 12 gauge All Specifications are Averages and Subject to Change Mossberg® 590 shotguns and can be used with a variety of SureFire® forend lights.

Each model features a 1.25” sling loop. All steel construction and finished in a black nitride. Easy to install and does not require any modifications to the shotgun.

Only available from SAGE or authorized SAGE resellers/distributors.

989.739.7000 www.sageinternationalltd.com [email protected] ACCESSORIES SHOTGUN

SHOTGUN VERTICAL FOR VERTICAL SHOTGUN

PRODUCT SPECIFICATIONS

VFG8P VFG8W

MODEL DESCRIPTION DETAILS - GRIPS VFG8P VERTICAL FORE-GRIP - PLAIN The VFG8P is a plain steel vertical fore-grip featuring a hollow plastic VFG8W VERTICAL FORE-GRIP – W/ TWO (2) PICATINNY RAILS grip.

LENGTH 5.75” (14.60 CM) The VFG8W is a steel vertical fore- WEIGHT .6 LBS (.27 KG) grip with dual side Picatinny rails

WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP and a hollow plastic grip. Both

All Specifications are Averages and Subject to Change models are designed to fit 12 gauge Remington® 870 shotguns.

SAGE shotgun vertical fore-grips help increase weapon control and retention.

Additionally the SAGE VFG8W allows accessories to be easily mounted via the dual Picatinny rails.

No permanent modification to the shotgun is necessary with either model.

Easy to install and remove. Only available from SAGE or authorized SAGE resellers/distributors.

989.739.7000 www.sageinternationalltd.com [email protected] ACCESSORIES SHOTGUN

SHOTGUN GHOST RING S RING GHOST SHOTGUN

PRODUCT SPECIFICATIONS

NON-SHROUDED SHROUDED

KITS IGHT NON-SHROUDED GHOST RING SIGHT KITS DETAILS

MODEL DESCRIPTION SAGE Shrouded and Non-Shrouded SGRSK/812NS FITS .817" - .827" BARRELS Ghost Ring Sight Kits are available in a SGRSK/828NS FITS .833" - .843" BARRELS variety of sizes to accommodate most

SGRSK/843NS FITS .848" - .858" BARRELS shotgun barrels. SGRSK/843MNS FITS .848" - .858" BARRELS (NOTCHED FOR MOSS 590) SGRSK/860NS FITS .865" - .875" BARRELS Mounting consists of drilling and tapping three holes, no other SGRSK/875NS FITS .880" - .890" BARRELS modifications are necessary. WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP All Specifications are Averages and Subject to Change All steel construction and features a black nitride finish. Fits barrels with muzzle OD in the .817" to .890" SHROUDED GHOST RING SIGHT KITS range. MODEL DESCRIPTION SGRSK/812 FITS .817" - .827" BARRELS Shrouded model protects sight & SGRSK/828 FITS .833" - .843" BARRELS help with visual alignment SGRSK/843 FITS .848" - .858" BARRELS No bead is included. Red fiber-optic, SGRSK/843M FITS .848" - .858" BARRELS (NOTCHED FOR MOSS 590) green fiber-optic and self powered SGRSK/860 FITS .865" - .875" BARRELS Tritium is available as an additional SGRSK/875 FITS .880" - .890" BARRELS item. WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP All Specifications are Averages and Subject to Change Easy to install and remove. Only available from SAGE or authorized SAGE resellers/distributors.

989.739.7000 www.sageinternationalltd.com [email protected] ACCESSORIES SHOTGUN

SHOTGUN LIGHT MOUNT LIGHT SHOTGUN

PRODUCT SPECIFICATIONS

*SHOTGUN & FLASHLIGHT NOT INCLUDED

MODEL DESCRIPTION DETAILS

FORCE-RS LIGHT MOUNT - ACCEPTS 1” DIAMETER FRS1187 LIGHTS The SAGE FRS1187 is a FORCE-RS Light Mount designed to fit 12 gauge MATERIAL STEEL Remington® 1100 & 11-87 shotguns.

WEIGHT .3 LBS (.14 LBS) Accepts all 1" diameter flashlights FINISH BLACK NITRIDE or lasers. Light or laser attaches via WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP heavy duty compression collar

All Specifications are Averages and Subject to Change clamping system.

Machined from steel and finished in durable black nitride.

Easy to install and remove. No modifications to the shotgun are required.

Only available from SAGE or authorized SAGE resellers/distributors.

989.739.7000 www.sageinternationalltd.com [email protected] ALL VARIANTS ALL ACC VARIANT M16 & M4

ESSORIES M4 & M16 VARIANT ACCESSORIES ALL VARIANTS

ACC VARIANT M16 & M4

M16 INTE M16

PRODUCT SPECIFICATIONS

SYSTEMS RBAR

IPS/MM12 IPS/MM12RG

MODEL DESCRIPTION DETAILS

M16 INTERBAR SYSTEM – DIRECT MOUNT FOR 12 GAUGE IPS/MM12 SHOTGUN. FITS COLT 723, M4, AND 9MM SMG. The IPS/MM12 is an INTERBAR M16 INTERBAR SYSTEM – INCLUDES RAIL GRABBER system designed for Colt 723, M4, IPS/MM12RG DEVICE. FITS COLT 723, M4, AND 9MM SMG. and 9mm SMG. The IPS bar is drilled ESSORIES to direct mount a 12 gauge shotgun MATERIAL ALUMINUM via four mounting screws. LENGTH 10.75” (27.30 CM) IPS/MM12 .8 LBS (.36 KG) WEIGHT Positive lock up on rifle bayonet lug IPS/MM12RG 1.2 LBS (.54 KG) and rifle front hinge pin. Includes FINISH HARD ANODIZE INTERBAR, special bottom receiver hinge pin and mounting hardware. WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP All Specifications are Averages and Subject to Change The IPS/MM12 is an INTERBAR system designed for Colt 723, M4, and 9mm SMG. The IPS bar mounts a quick opening rail grabber for ease of mounting or releasing the shotgun without removing the IPS Rail.

Positive lock up on rifle bayonet lug and rifle front hinge pin.

Only available from SAGE or authorized SAGE resellers/distributors.

989.739.7000 www.sageinternationalltd.com [email protected] ACC VARIANT M16 & M4

M4 QUICK DETACH PLAT DETACH QUICK M4

PRODUCT SPECIFICATIONS

FORM

MODEL DESCRIPTION DETAILS

QDM4PS M4 QUICK DETACHABLE INTEGRATED PLATFORM The QDM4PS is an INTERBAR

MATERIAL ALUMINUM system designed for Colt 723, M4,

and 9mm SMG. ESSORIES WEIGHT 1.2 LBS (.54 KG) LENGTH 10.75” (27.30 KG) The IPS bar mounts a quick opening rail grabber for ease of mounting or FINISH HARD ANODIZE releasing the shotgun without WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP removing the IPS Rail. Positive lock

All Specifications are Averages and Subject to Change up on rifle bayonet lug and rifle front hinge pin.

Accommodates breaching shotguns and under-mount grenade launchers.

Machined from aluminum and finished with hard anodizing.

Includes QD platform system and mounting instructions. Only available from SAGE or authorized SAGE resellers/distributors.

989.739.7000 www.sageinternationalltd.com [email protected] ACC VARIANT M16 & M4

M4 / M16 MUZZLE HAND MUZZLE M16 / M4

PRODUCT SPECIFICATIONS

*RIFLE NOT INCLUDED GUARD

MODEL DESCRIPTION DETAILS

MHG16 M4 / M16 MUZZLE HAND GUARD The MHG16 an M4/M16 SMG muzzle MATERIAL STEEL hand guard. It is designed to fit the

ESSORIES Colt 9MM SMG. It is machined from WEIGHT .3 LBS (.14 KG) plain steel and is finished in black FINISH BLACK NITRIDE nitride.

WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP Tested and proven design that All Specifications are Averages and Subject to Change requires no necessary rifle modifications for installation.

Easily removable and installs in seconds via the rifle bayonet lug.

Only available from SAGE or authorized SAGE resellers/distributors.

989.739.7000 www.sageinternationalltd.com [email protected] ACC VARIANT M16 & M4

M4 / M16 LIGHT MOUNT LIGHT M16 / M4

PRODUCT SPECIFICATIONS

*RIFLE & FLASHLIGHT NOT INCLUDED

MODEL DESCRIPTION DETAILS

FRSM16S LIGHT MOUNT – FITS COLT M16/M16A2, RUGER MINI-14® The FRSM16S and FRSM16G are tactical light mounts designed for a FRSM16G LIGHT MOUNT – FITS COLT M16A2, SMG 9MM variety of rifle platforms. ESSORIES MATERIAL STEEL The FRSM16S fits the Colt M16, FINISH BLACK NITRIDE M16A2, M4 & Ruger Mini-14®. WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP

All Specifications are Averages and Subject to Change The FRSM16G fits the Colt M16A2 & 9mm SMG.

Designed for easy removal and installation via the rifle bayonet lug.

Accepts 1" diameter flashlight or laser. Light or laser attaches via heavy duty compression collar clamping system.

Machined from steel and finished in durable black nitride.

Only available from SAGE or authorized SAGE resellers/distributors.

989.739.7000 www.sageinternationalltd.com [email protected] ALL VARIANTS ALL M WEAPON SPECIALIZED

SPECIALIZED WEAPON SYSTEMS OUNTING MOUNTING SYSTEMS ALL VARIANTS

SPECIALIZ

7.62MM NATO CAPABLE CAPABLE NATO 7.62MM

PRODUCT SPECIFICATIONS

ED WEAPON MOUNTING S MOUNTING WEAPON ED

MOUNT SOFT

MODEL DESCRIPTION DETAILS

762NCSM 7.62 NATO CAPABLE SOFT MOUNT The SAGE 762NCSM is a 7.62 NATO

MATERIAL STEEL capable soft mount that accepts the M240 and M249 machine guns. WEIGHT 6.2 LBS (2.81 KG)

FINISH BLACK NITRIDE Machined from steel and finished in durable black nitride.

WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP All Specifications are Averages and Subject to Change Includes soft mount, pintle and pintle mounting bolt.

Only available from SAGE or authorized SAGE resellers/distributors.

YSTEMS

989.739.7000 www.sageinternationalltd.com [email protected] M WEAPON SPECIALIZED

SPECIALIZE

PRODUCT SPECIFICATIONS

BAR ADAPTER D

*762NCSM NOT INCLUDED

MODEL DESCRIPTION DETAILS

ADAPTER BAR – FITS 762NCSM AND ALLOWS MACHINE SMABARG GUN MOUNTING The SAGE SMABARG is an adaptor bar that fits all M240 and M249 soft- MATERIAL ALUMINUM W/ STAINLESS STEEL COMPONENTS mounts (762NCSM). Designed for WEIGHT 2.0 LBS (.90 KG) MK14 Mod-O & Mod-1 Rifle, MK 46 & SYSTEMS OUNTING MK 48 Machine Gun. FINISH HARD ANODIZE & BLACK NITRIDE WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP Special gripper allows existing soft-

All Specifications are Averages and Subject to Change mounts to provide a stable platform for the noted rifle and machine guns. Grips the rifle by its integral Picatinny Rail.

No modifications to the rifle are required. Design allows for quick rifle mounting and removal.

All springs, pins, and components are stainless steel for added corrosion protection and durability.

Only available from SAGE or authorized SAGE resellers/distributors.

989.739.7000 www.sageinternationalltd.com [email protected] M WEAPON SPECIALIZED

EQUILIBRATED

PRODUCT SPECIFICATIONS

ADAPTER BAR ADAPTER

*762NCSM NOT INCLUDED

MODEL DESCRIPTION DETAILS

HMABARG EQUILIBRATED ADAPTER BAR The SAGE HMABARG is an MATERIAL ALUMINUM W/ STAINLESS STEEL COMPONENTS equilibrated adaptor bar that fits all conventional M240 and M249 WEIGHT 1.8 LBS (.81 KG) machine gun mounts. SYSTEMS OUNTING FINISH HARD ANODIZE & BLACK NITRIDE WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP Designed for MK14 Mod-O & Mod-1 Rifle, MK 46 & MK 48 Machine Gun. All Specifications are Averages and Subject to Change

Special gripper is spring equilibrated allowing a conventional hard machine gun mount to provide a more stable platform for the noted rifle and machine guns.

No modifications to the rifle are required. Design allows for quick rifle mounting and removal.

All springs, pins, and components are stainless steel for added corrosion protection and durability.

Only available from SAGE or

authorized SAGE resellers/distributors.

989.739.7000 www.sageinternationalltd.com [email protected] M WEAPON SPECIALIZED

RAIL GRABBER GRABBER RAIL

PRODUCT SPECIFICATIONS

–

DEVICES LARGE

TOP VIEW BOTTOM VIEW

MODEL DESCRIPTION DETAILS

762RG RAIL GRABBER – LARGE DEVICES The SAGE 762RG is a special MATERIAL ALUMINUM W/ STAINLESS STEEL COMPONENTS Picatinny rail grabber that allows versatile mounting solutions with WEIGHT .5 LBS (.23 KG) the strength to handle 7.62 NATO OUNTING

LENGTH 4.87” (12.36 CM) recoil. FINISH HARD ANODIZE & BLACK NITRIDE An adjustable gripping surface WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP allows for positive, no slip, All Specifications are Averages and Subject to Change Picatinny rail engagement even with oversized or undersized rails.

No modifications to the rifle are required. Design allows for quick

rifle mounting and removal. SYSTEMS

All springs, pins, and components are stainless steel for added corrosion protection and durability.

Only available from SAGE or authorized SAGE resellers/distributors.

989.739.7000 www.sageinternationalltd.com [email protected] ALL VARIANTS ALL PRODUCTS SECURITY

SECURITY PRODUCTS ALL VARIANTS

SECURIT

VEHICLE TIRE MARKER TIRE VEHICLE

PRODUCT SPECIFICATIONS

Y PRODUCTS Y

MODEL DESCRIPTION DETAILS

VTM028 VEHICLE TIRE MARKER The SAGE VTM028 is a 28” vehicle RCVTM REPLACEMENT CHALK – YELLOW (144 PIECES) tire marker. Used for regulating parking areas by marking vehicle LENGTH 28” (71 CM) tires. MATERIAL TUBULAR STEEL & PLASTIC WEIGHT .8 LBS (.36 KG) Tubular steel design and includes an ergonomical hand grip. Features FINISH BLACK POWDER COAT a black powder coat finish. WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP

All Specifications are Averages and Subject to Change Flexible tubular chalk holder for large diameter chalk. Chalk sold as a separate item-144 pieces per box.

Only available from SAGE or authorized SAGE resellers/distributors.

989.739.7000 www.sageinternationalltd.com [email protected] PRODUCTS SECURITY

PREMIER INSPECTION M INSPECTION PREMIER

PRODUCT SPECIFICATIONS

*NOT ALL MODELS SHOWN IRRORS

MODEL DESCRIPTION DETAILS

PIM1300C ADJUSTABLE 26”-43”, 5” CONVEX GLASS SAGE manufactures a variety of PIM1400C ADJUSTABLE 34”-52”, 8” CONVEX GLASS Premier Inspection Mirrors to accommodate most security and PIM1500C ADJUSTABLE 47”-77”, 8” CONVEX GLASS inspection needs. PIM1600C ADJUSTABLE 47”-77”, ARMREST, 8” CONVEX GLASS PIM1300AF ADJUSTABLE 26”-43”, 5” FLAT ACRYLIC Most PIM models feature Convex Glass or Flat Acrylic mirrors and are PIM1400AF ADJUSTABLE 34”-52”, 8” FLAT ACRYLIC able to fold for compact storage and PIM1500AF ADJUSTABLE 47”-77”, 8” FLAT ACRYLIC transport.

PIM1600AF ADJUSTABLE 47”-77”, ARMREST, 8” FLAT ACRYLIC Lengths vary from 26” to 77” and all PIM1700C ADJUSTABLE 47”-77”, LED LIGHTS, 12” CONVEX models will fully telescope via the FINISH BLACK POWDER COAT included adjustable twist lock.

WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP All models feature a non-slip rubber All Specifications are Averages and Subject to Change grip handle.

Only available from SAGE or authorized SAGE resellers/distributors.

989.739.7000 www.sageinternationalltd.com [email protected] PRODUCTS SECURITY

PIM1700 PREMIER INSP PREMIER PIM1700

MODEL PIM1700 PRODUCT SPECIFICATIONS

DIAMETER 12” (30.48cm) CONVEX LENGTH COLLAPSED 47” (119.38cm)

LENGTH EXTENDED 80” (203.20cm)

CASTERS ONLY 3.33” (84.6mm)

MIRROR OVER WITH ¼” RISER KIT 3.58” (90.9mm) GROUND HEIGHT WITH ½” RISER KIT 3.83” (97.3mm)

WITH ¾” RISER KIT 4.08” (103.6mm)

CASTERS ONLY .160” (4.1mm)

WITH ¼” RISER KIT .410” (10.4mm) CHASSIS GROUND CLEARANCE HEIGHT WITH ½” RISER KIT .660” (16.8mm)

ECTION MIRROR ECTION WITH ¾” RISER KIT .910” (23.1mm)

BATTERIES NOT INCLUDED (TWO 9-VOLT REQUIRED)

LIGHTS TWO (2) LED LIGHTBARS

FINISH BLACK POWDER COAT

WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP

All Specifications are Averages and Subject to Change

DETAILS

The Sage PIM1700 Premier Inspection Mirror is a 12”

convex acrylic security mirror that features an adjustable telescoping handle from 47” to 80” to accommodate most security and inspection needs.

The PIM1700 features three (3) smooth casters and multiple riser kit combinations so that chassis ground clearance height can be easily adjusted to accommodate varying surface conditions.

The dual LED light bars are illuminated by a waterproof switch located on the underside of the grip. The dual LED lights are angled specifically to give the operator a clear and bright presentation during the inspection process.

Features a non-slip rubber grip handle and durable black powder coat finish. Only available from Sage or authorized Sage distributors.

989.739.7000 www.sageinternationalltd.com [email protected]

PRODUCTS SECURITY

STANDARD INSPECTION INSPECTION STANDARD

PRODUCT SPECIFICATIONS

*NOT ALL MODELS SHOWN MIRRORS

MODEL DESCRIPTION DETAILS IMFL/12 FIXED LENGTH, 12”, 5” CONVEX GLASS MIRROR

IMFL/30 FIXED LENGTH 30”, 5” CONVEX GLASS MIRROR SAGE manufactures a variety of IMFL/40 FIXED LENGTH 40”, 5” CONVEX GLASS MIRROR Standard Inspection Mirrors to accommodate most security and TELESCOPING ADJUSTABLE LENGTH 35” TO 56”, 8” IMTAL/8 CONVEX GLASS MIRROR, WITH WHEEL KIT & WITH inspection needs.

FLASHLIGHT HOLDER TELESCOPING ADJUSTABLE LENGTH 35” TO 56”, 5” Most SIM models feature Convex IMTAL/5 CONVEX GLASS MIRROR, WITHOUT WHEEL KIT & WITH Glass or Flat Acrylic mirrors and FLASHLIGHT HOLDER many are offered with integral IMHHPM HAND HELD PERSONAL MIRROR 3” X 5” flashlight holders. IMFL/12(AF) FIXED LENGTH, 12”, 5” FLAT ACRYLIC MIRROR IMFL/30(AF) FIXED LENGTH, 30”, 5” FLAT ACRYLIC MIRROR Lengths vary from 12” to 60”. IMFL/40(AF) FIXED LENGTH, 40”, 5” FLAT ACRYLIC MIRROR Certain models are offered with telescoping capabilities. TELESCOPING ADJUSTABLE LENGTH 35” TO 56”, 8” FLAT IMTAL/8(AF) ACRYLIC MIRROR, WITH WHEEL KIT & WITH FLASHLIGHT HOLDER Only available from SAGE or TELESCOPING ADJUSTABLE LENGTH 35” TO 56”, 5” FLAT authorized SAGE IMTAL/5(AF) ACRYLIC MIRROR WITHOUT WHEEL KIT & WITH resellers/distributors. FLASHLIGHT HOLDER FINISH BLACK POWDER COAT WARRANTY 1 YEAR MATERIAL DEFECTS & WORKMANSHIP All Specifications are Averages and Subject to Change

989.739.7000 www.sageinternationalltd.com [email protected] ALL VARIANTS ALL PART REPLACEMENT EBR

EBR REPLACEMENT PARTS ALL VARIANTS

PART REPLACEMENT EBR

M14ALCS ENHANCED BAT ENHANCED M14ALCS

PRODUCT SPECIFICATIONS

SCHM PART # DESCRIPTION RIFLE TLE 1 90900 STOCK CHASSIS 2 90901 TOP COVER, STANDARD BARREL 87 90987 TOP COVER, MEDIUM BARREL

TOP COVER, MEDIUM BARREL, ACCOMMODATING SEI 88 90988 MOUNT

TOP COVER, STANDARD BARREL, ACCOMMODATING SEI 90 90990 MOUNT 3 90903 BUTT STOCK STRUTT ASSEMBLY

4 90904 BUTT STOCK MAIN BODY ASSEMBLY*

5 M14ERGO ERGO GRIP S

FORE-GRIP (KYDEX), SINGLE UNIT, BLACK OR TAN OR 2- 7 90907 PIECE UNIT SCHM PART # DESCRIPTION

8 90908 CHEEK REST 34 90934 SIDE RAIL ATTACHMENT SCREW (2 EA)

9 90909 ELEVATOR-CHEEK REST SUPPORT 35 90935 FRONT SLING ATTACHMENT 10 90910 RECOIL PAD (PACHMAYR) 36 90936 FRONT SLING ATTACHMENT BACK PLATE 11 90911 BUTT PLATE INTERMEDIATE SPACER 37 90937 FRONT SLING ATTACHMENT SCREW (2 EA) 12 90912 ELEVATOR CHEEK REST LOCK WRENCH 38 90938 BARREL TENSION SCREW 13 90913 CHASSIS SLING ATTACHMENT PLATE 39 90939 BARREL TENSION LOCK SCREW 14 90914 CHASSIS OPERATING ROD GUIDE 40 90940 FORE-GRIP (KYDEX) ATTACHMENT SCREW 15 90915 BOTTOM RAIL FORE-GRIP (KYDEX) ATTACHMENT SCREW 26 90926 16 90916 LEFT SIDE RAIL FOR 2- PIECE UNIT BUTT STOCK BUTT PLATE WELDMENT 17 90917 RIGHT SIDE RAIL 41 90941 18 90918 STOCK LOCK BAR RETURN SPRING ASSEMBLY 19 90919 PISTOL GRIP MOUNTING SCREW 42 90942 BUTT STOCK STRUTT ROD (2 EA) BUTT STOCK STRUTT MOUNTING, BUTT 20 90920 PISTOL GRIP MOUNTING SCREW LOCK WASHER 43 90943 21 90921 PISTOL GRIP MOUNTING SCREW FLAT WASHER STOCK STRUTT STOP SCREW (6 EA) 22 90922 CHEEK REST MOUNTING SCREW (2 EACH) 44 90944 BUTT STOCK SLING ATTACHMENT WIRE COLLAPSIBLE BUTT STOCK MAIN BODY 23 90923 RECOIL PAD MOUNTING SCREW 45 90945 24 90924 ELEVATOR LOCK SCREW WELDMENT 25 90925 ELEVATOR LOCK NUT 46 90946 LOCK BAR 27 90927 BUTT STOCK MAIN BODY SECONDARY MOUNTING SCREW 47 90947 LOCK BAR ACTUATING BOLT BUTT STOCK MAIN BODY SECONDARY MOUNTING SCREW 48 90948 LOCK BAR THUMB RELEASE LEVER 28 90928 FLAT WASHER 49 90949 LOCK BAR RETURN SPRING RETAINING CUP LOCK BAR THUMB RELEASE LEVER TENSION 29 90929 BUTT STOCK MAIN BODY PRIMARY MOUNTING SCREW 50 90950 BUTT STOCK MAIN BODY PRIMARY MOUNTING SCREW SPRING 30 90930 FLAT WASHER 54 90954 ELEVATOR CHEEK REST SUPPORT ELEVATOR CHEEK REST PLUNGER STOP 31 90931 OPERATING ROD GUIDE SCREW (3 EA) 55 90955 32 90932 TOP COVER ATTACHMENT SCREWS SCREW 33 90933 BOTTOM RAIL ATTACHMENT SCREW (4 EA) 56 90958 CRUSH WASHER, SPACER FRONT BAND

Current production replacement parts for the M14ALCS EBR are available. Please use the schematic above to locate replacement part number.

Please Note: Not all SAGE International, Ltd. products are available in all areas of the United States and Canada.

989.739.7000 www.sageinternationalltd.com [email protected]