2016 Product Catalog SLIM LINE RAIL COVER GRIP F93 PRO LOW PROFILE RAIL PROTECTION 8 POSITION COLLAPSIBLE WITH FIXED CHEEK PIECE AND EXCELLENT GRIP PAGE 34 FOR CONSISTENT CHEEK WELD AND COMFORT M4 FORWARD RAIL PAGE 16-17 PAGE 20

LADDER RAIL COVER GRIP PAGE 35

ERGO Z RAIL TWO PIECE PICATINNY NEVER QUIT MAGWELL GRIP REPLACEMENT PAGE 12 PAGE 22 ERGO 2 GRIP A2 CAVITY COMPATIBLE WITH MANY GRIP ACCESSORIES PAGE 7

LADDER RAIL COVER GRIP PAGE 35 SLIM LINE RAIL COVER GRIP PAGE 34

ERGO BROOM HANDLE VERTICAL FORWARD GRIP ERGO Z FLOAT PICATINNY PAGE 13 PAGE 21

NEVER QUIT MAGWELL GRIP PAGE 12

Table of Contents: Rifle Grips...... 6-13 Rail Cover Grips...... 34-39 Pro Stock...... 16-17 Handgun Grips...... 42-45 Rail Systems...... 20-27 Accessories...... 46-47 Rail Accessories...... 28-33 Accessories...... 48-52 Call Toll Free www.ERGO .net Page 2 Grips 877-281-3783Page 3 Rifle grips Human engineered for Competition Hunting

Police / Military

www.ERGOGrips.net THE ORIGINAL ERGO GRIP ERGO 2 AR & SCAR

he original Ergo Grip, developed by Steve Hines, he Ergo 2 shows Ergo Grip’s dedication to T was the first truly ergonomic, shooter focused grip T shooter focused accessories. Developed for AR platform rifles. Designed for performance by cre- in response to requests for an Ergo Grip with ating a better interface between the shooter and , an A2 cavity, the Ergo 2 accepts common tools the Ergo Grip is the standard by which positive grip and and accessories designed to fit in an AR-15 grip. shooter comfort are measured. The Ergo Grip comes The Ergo Grip comes with the patented Gapper™ 4010-BK with the patented Gapper™ (page 11) for increased com- 4009-BK (page 11) for increased comfort. fort. $32.25 $28.50 AR SCAR SUREGRIP

4010-BK 4010-DE 4010-OD 4010-GG 4141-BK 4141-CB

• Design allows installation on both .223 and .308 AR-15 type lower 4011-BK 4011-DE 4011-OD 4005-PK receivers. • A2 sized inner cavity compatible with many accessories available SUREGRIP-AT on the market. • Ergonomically correct finger grooves • Integrated rear upper extension supports the web of your hand. • Over molded SUREGRIP material provides non-slip grip • Virtually impervious to oils and solvents 4009-DE 4009-OD • Comes with The Gapper™ 4009-BK *DUAL USE COMPATIBLE WITH SHOTGUN ADAPTER #4453 AND #4454 • Fits AR-15 type in .223 and .308 RIGID • Ergonomically correct finger grooves • Integrated rear upper extension supports the web of your hand • AT Aggressive texture improves weapon control ERGO SWIFT GRIP • Virtually impervious to oils and solvents • Over molded SUREGRIP material • Comes with The Gapper™ 4015-BK *DUAL USE COMPATIBLE WITH SHOTGUN ADAPTER #4453 AND #4454 he Ergo Swift Grip was designed for shooters who T prefer or need to use a compact stance when shooting their rifle, such as in vehicle operations or while using PDWs. The reduced grip angle improves comfort and control. The textured shape provides a positive grip in all environments. 4093-BK • Reduced grip angle designed for compact shooting positions and PDWs • Rigid Polymer construction $18.50 • Shaped and textured for maximum handling and control *DUAL USE COMPATIBLE WITH SHOTGUN ADAPTER #4453 AND #4454

Call Toll Free www.ERGO .net Page 6 Grips 877-281-3783Page 7 ERGO TACTICAL DELUXE GRIPS FLAT TOP TACTICAL DELUXE GRIPS

rgo Grip products focus on the shooter. The Tactical rgo Flat Top Tactical Deluxe grips are specifically E Deluxe is no exception. Designed with shapes and E designed to work with chassis style rifle platforms. contours to fit the human hand, the Tactical Deluxe is a Their modified configuration fits flush with the larger, more rounded grip for exceptional comfort and con- and provides all the benefits of the Ergo Tactical Deluxe trol. The ergonomically enhanced Tactical Deluxe Grip fits such as increased grip, comfort and control. 5.56 and .308 rifles. • Fits modern chassis system stocks commonly made for • Fits AR-15 type firearms in .223 and .308 4045-BK bolt action rifles. • Over molded Suregrip material with heavy texture • Over molded Suregrip material with heavy texture • Ambidextrous palm swell $43.50 4025-BK • Ambidextrous palm swell • Fits medium to large hands $43.50 • Fits medium to large hands *DUAL USE COMPATIBLE WITH SHOTGUN ADAPTER #4453 AND #4454 *DUAL USE COMPATIBLE WITH SHOTGUN ADAPTER #4453 AND #4454

4045-BK 4045-DE 4045-OD 4025-BK 4025-DE

TACTICAL DELUXE WITH PALM SHELF TACTICAL DELUXE FLAT TOP PALM SHELF

he Tactical Deluxe with Palm Shelf takes comfort he Tactical Deluxe Flat Top with Palm Shelf takes T and control to a new level. It has the same shape T comfort and control to a new level. It has the and size as the Tactical Deluxe, but features a rest on same shape and size as the Tactical Deluxe, but fea- the bottom of the grip to support the hand, allowing bet- tures a rest on the bottom of the grip to support the ter trigger control. In particular this grip configuration hand, allowing better trigger control. In particular this excels on precision rifles. The ergonomically enhanced $64.50 grip configuration excels on precision rifles. The ergo- Tactical Deluxe Grip fits 5.56 and .308 rifles. 4035-BK nomically enhanced Tactical Deluxe Grip fits 5.56 and .308 rifles and features: • Same grip features as our original ERGO Grips, but in a heavier textured design to fit large AR/M4 rifles, with a rear • Same grip features as our original ERGO Grips, but in a upper web support heavier textured design to fit large AR/M4 rifles, with a rear • Ambidextrous palm swell provides shooters with proper upper web support trigger finger placement • Ambidextrous palm swell provides shooters with proper • Adjustable palm shelf for strong hand support and trigger trigger finger placement control 4055-BK • Adjustable palm shelf for strong hand support and trigger $64.50 control

4055-BK 4055-DE 4055-OD 4035-BK 4035-DE Call Toll Free www.ERGO .net Page 8 Grips 877-281-3783Page 9 ERGO MSR GRIPS ERGO AK CLASSIC & FAL METRIC GRIPS

he Ergo MSR Grip, for Modern Sporting Rifle, is perfect for shoot- he same comfort and control as the original Ergo Grip, but for AK and FAL (Metric) T ers looking for an easy, bolt on upgrade for their standard AR T platform rifles. A definite upgrade over the stock grips on these classic rifles. grip. A significant improvement over the A2 style grip, the MSR shape and texture provide better control and comfort. Custom textures and • Over molded SUREGRIP material provides non-slip grip • Ambidextrous design with smooth finger grooves patterns are available for rifle manufacturers looking for a unique grip • Superior design and textured finish for enhanced weapon control of their own. • Bottom storage compartment with tethered rubber plug $18.00 $28.50 • Ergonomic shape and texture for excellent control and comfort FAL 4106-BK • Custom textures available for rifle manufacturers • Integral rear upper extension supports the web of the shooter’s hand 4092-BK • Fits metric pattern FAL • Patent Pending type rifles DUAL USE COMPATIBLE WITH SHOTGUN ADAPTER #4453 AND #4454 • Does not come with screw $28.50 AK 4139-BK • Installs with 6mm screw (included) • New design also fits PAP AK Firearms

AK Rigid 4130-BK $21.50 • Rigid polymer construc- ERGO STO GRIP tion. • Installs with 6mm screw (included) he Ergo STO grip is a standard A2 style grip with the addi- • Does not have plug T tion of a hinged floor plate for secure storage of accesso- • New Design also fits PAP AK Firearms ries or spare parts. Molded from glass filled polymer. Available in black or flat dark earth. GAPPER™ 4085 Fills the gap between the trigger guard and the pistol grip on $4.00 the AR/M4 and cushions your knuckle, prevents abrasion to your finger and provides a more finished look to your rifle. The $19.00 4085-6PK GAPPER™ is made from solvent resistant Santoprene®, clips in $14.50 easily, and secures with a tight friction fit. Patent # 6,434,874 A2 PISTOL GRIP PLUG Designed to plug the cavity on the bottom of a standard A2 grip, 4095-BK 4095-DE this press fit plug is secured by friction. The plug prevents debris 4095-DE $5.00 4933 from lodging in the cavity of the grip and functions as a shock absorbing pad to protect the grip when setting the rifle down on hard surfaces.

Toll Free 4092-BK Call www.ERGO .net Page 10 Grips 877-281-3783Page 11 VERTICAL FORWARD GRIPS ERGO STRAIGHT BROOM HANDLE VFG his traditional VFG is comfortable and rugged. A durable hard plastic core is over ERGO MINI-MAX VFG T molded with rubber and bolted to an aluminum base. Available with either the Ergo Express lever system, or with a base that bolts directly to military style AR-15 two his VFG is the most versatile available. As well as serving as a traditional verti- piece hand guards. A storage compartment with a threaded cap is standard. T cal forward grip, it is small enough to be used like an angled forward grip, or even as a forward hand stop. Very sturdy design. • Features an over molded rubber grip attached to durable anodized base with steel bolt XPRESS LEVER VFG • The threaded cap seals the storage area, each comes with a foam insert • XPRESS Mount model attaches to Picatinny rails without removing other rail accessories • All aluminum vertical forward grip with grooved grip area $85.50 • XPRESS lever mount and thumb screw for quick at- $74.50 tachment and removal from Picatinny rails 4271-BK 4255-BK • Length 3” • Weight 4.6 ounces • Grip comes straight off so removal does not require removal of other rail mounted accessories *COMPATIBLE WITH SHOTGUN TRI-RAIL FORENDS 4255-BK 4255-DE 4255-OD ERGO POP BOTTLE VFG he Pop Bottle VFG is a basic, no frills, rugged VFG. Made XPRESS MOUNT T from polymer, this one piece VFG slides onto Picatinny MOUNT rails and is secured with a cross bolt. • Injection molded Vertical Forward Grip, extremely durable and tough • Slide rail mount to Picatinny rails with cross bolt section $43.50 • Also comes in Dark Earth and OD Green 4257-BK 4253-BK

$21.75 *COMPATIBLE WITH SHOTGUN TRI-RAIL FORENDS ERGO GRIP VFG

*COMPATIBLE WITH SHOTGUN TRI-RAIL FORENDS ade with an Ergo Grip, this VFG gives the support 4253-BK 4253-DE 4253-OD M hand the same comfort and control as the strong ERGO NEVER QUIT MAGWELL GRIP hand when using an Ergo Grip. • Reconfigures the squared shape of the AR/M4 magazine well into an ergo- • Ambidextrous forward grip attached to anodized mounting base nomic and comfortable grip option • Fits Picatinny rails with nut/clamp bar mount $80.00 • Gives AR/M4 receivers a distinctive aesthetic upgrade • Easy installation *COMPATIBLE WITH SHOTGUN TRI-RAIL FORENDS 4250-BK • Oil and solvent resistant Santoprene® construction • NTOA Recommended SURE STOP his fantastic, easy to install tactical hand stop is perfect for use T on any rifle, or shotgun where a positive forward stop is 4965-BK $26.75 4965-BK 4965-OD 4965-CB needed for the support hand. *THIS FITS AR-15/M-16 LOWER RE- 4201-BK • Useful on short barrel rifles and CEIVERS WITH A REMOVABLE TRIG- GER GUARD. IT DOES NOT FIT AR- • Can act as a hand positioning device 10 LARGE FRAME RECEIVERS OR 4965-DE 4965-PK 4965-GG $13.25 *DUAL USE, COMPATIBLE WITH RIFLES AND SHOTGUNS RECEIVERS WITH A PERMANENTLY ATTACHED TRIGGER GUARD. Call Toll Free www.ERGO .net Page 12 Grips 877-281-3783Page 13 f93 pro stock f93 pro stock adjustable

www.ERGOGrips.net ONE OF THE LONGEST LENGTH FIXED CHEEK PIECE PROVIDES SUPERIOR RUBBER BUTT PAD INCLUDED OF PULL ADJUSTMENTS AVAILABLE COMFORT AND CONSISTENT CHEEK F93 PROSTOCK WELD FOR BETTER ACCURACY CASTLE NUT INCLUDED ight position collapsible stock for AR style rifles and shot- E guns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight OVER MOLDED BUFFER EIGHT ADJUSTABLE stock positions. TUBE INCLUDED POSITIONS

STOCK SOLIDLY LOCKS INTO POSITION MULTIPLE LIKE A FIXED STOCK. AMBIDEXTROUS SLING ATTACHMENT POINTS NO MOVEMENT OR RATTLES LOOP INCLUDED ALUMINUM QUICK RELEASE SLING ATTACHMENT POINTS INCLUDED

• Once the butt is locked into position, the F93 has the feel of a fixed stock without the rattling and movement shooters experience with a carbine stock • Includes an over molded carbine length buffer tube, standard castle nut and ambidextrous sling plate • Includes rubber-like recoil pad for enhanced comfort and secure, positive placement • Includes 2 quick detach sling attachment points, 3 web sling attachment points and 2 sling hook attachment points • 8 inches from receiver to butt plate when collapsed, 12 inches when fully extended • Weight is only 1.3 pounds

$222.50

Black Dark Earth OD Green Graphite Grey Pink

LARGE FRAME AR 4924-BK 4924-DE 4924-OD 4924-GG 4924-PK AR 15 4925-BK 4925-DE 4925-OD 4925-GG 4925-PK

ERGO F93 PRO STOCK $16.50 ERGO F93 PRO STOCK $21.75 BUTT PAD STRIKE PLATE • ERGO F93 PRO Stock™ Butt pad 4981-BK 4980 • Black • Protects the ERGO F93 PRO STOCK™ from damage and impact *DUAL USE, COMPATIBLE WITH RIFLES AND SHOTGUNS • Machined from 6061 T6 anodized aluminum *DUAL USE, COMPATIBLE WITH RIFLES AND SHOTGUNS Call Toll Free www.ERGO .net Page 16 Grips 877-281-3783Page 17 Rail systems M-Lok™ keymod z rail z float

www.ERGOGrips.net ERGO RAIL SYSTEMS ERGO Z FLOAT RAIL SYSTEM ore than just a standard quad-Pictinny Rail, the Ergo Z Float Rail is engineered ERGO M4 FORWARD RAIL SYSTEM M for maximum performance for both the shooter and the rifle. This two-piece his is a stand-alone forward quad system for AR-15/M4 pattern rifles system is thinner than it is tall, making it lighter weight, more compact and easier to grip T with a standard A1/A2 front sight base. The M4 Forward rail clamps to the sight than other quad rail systems. Available in mid-length, carbine length and pistol length. base without any modification to the rifle or existing hand guards. TWO PIECE FREE FLOAT STYLE HANDGUARD RAIL SYSTEM • Stand-alone forward rail system for AR/M4 weapons with a • Two piece 6061 T6 hard matte black anodized aluminum construction standard A1/A2 front sight base • Thinner profile for enhanced forward control • Allows for attachment of Picatinny rail mounted accessories • Easy installation without removing barrel forward of the front sight base • Black hard anodized finish • Provides extended hand hold opportunities for shooters • Includes Black ERGO LowPro Rail Covers • Installs onto A1/A2 front sight base, locking inside the front 4805 • Requires removal of delta ring sight - requiring NO modification to firearm • Compatible with Adams Arms and similar piston systems 4850 • Includes Black ERGO LowPro Rail Covers $159.50 • Weight: 8.7 ounces *WEIGHT: 8 OUNCES $96.00 PISTOL LENGTH, 4-1/4”

4809 $213.00 *WEIGHT: 11.3 OUNCES CAR/M4 LENGTH, 7-3/16” (MUST REMOVE HANDGUARD RETAINING CAP)

4813-OS $255.50 *WEIGHT: 14.6 OUNCES CARBINE LENGTH WITH OVERSHOOT AND A2 FRONT SIGHT CUT OUT

4813-SPECTRE $255.50 *WEIGHT: 15 OUNCES SPECTRE LENGTH, 9-3/16”

Toll Free 4092-BK Call www.ERGO .net Page 20 Grips 877-281-3783Page 21 ERGO Z RAIL SYSTEM ERGO KEYMOD FORWARD RAIL SYSTEM KeyMod Forward Rail system for carbine style AR rifles. De- he ERGO Z Rail™ Replacement handguard is engineered to provide shooters with A signed for shooter comfort and performance, this new Forward T an easily installed upgrade for their carbine length AR/M4 weapons systems. Rail is a KeyMod quad system that bolts to and extends forward of Ideal for shooters who prefer a thin profile, lightweight, less permanent installation; an A2 front sight base without modification to the rifle or existing this precision crafted mounting platform replaces carbine length handguards without handguards. This allows mounting KeyMod accessories or Picatinny modification. rail sections forward of the front sight, leaving more space on the TWO PIECE REPLACEMENT HANDGUARD RAIL SYSTEM handguards for better handling and control of the rifle.

• Two piece 6061 T6 hard matte black anodized aluminum construction • KeyMod forward rail (KFR) 4237 • Thinner profile for enhanced forward control • Mounts to A-2 front sight • Black hard anodized finish • Black Anodize 6061-T6 Alum $138.50 • Includes Black ERGO LowPro Rail Covers • Compatible with Adams Arms and similar piston systems • Weight: 9.1 ounces ERGO KEYMOD ULTRA-LITE SLIM RAIL SYSTEM 4811-P he Ultra Lite S KeyMod handguard is a definitive T upgrade for any AR carbine that uses a two piece $181.00 handguard. Simple, drop in replacement with no gun- smithing required. CNC machined from 6061-T6 alumi- num, these handguards feature a top Picatinny rail and KeyMod slots on the sides and bottom. The Ultra-Lite is also ultra-slim and weighs less than standard plastic 4807-BK hand guards. $191.75 • Aluminum drop-in replacement KeyMod hand guards for AR • The ultralight design, 4.9oz, weighs less than standard mili- tary M4 plastic hand guards • The ultra slim profile measures only 1.95” in height and 1.6” in width • KeyMod slots on both sides and bottom for mounting acces- sories as needed 4807-DE • Integral top MIL-STD 1913 Picatinny rail • Includes one black ladder rail cover to protect the top rail $223.50 and for shooter grip and comfort • Machined from 6061-T6 aluminum • Hard coat anodized matte black • Available with Cerakote™ in either Dark Earth or Olive Drab • Cerakote™ Finish - ASTM

4807-OD $223.50

Call Toll Free www.ERGO .net Page 22 Grips 877-281-3783Page 23 ERGO KEYMOD ULTRA-LITE SYSTEM ERGO MODULAR KEYMOD RAIL SYSTEM ike the Ultra Lite S KeyMod hand guard, the Ultra Lite Z is a major upgrade for he ERGO Modular Free Float KeyMod Rail System provides a 2” outside di- L any AR carbine that uses a two piece hand guard. These are a simple, drop in T ameter and a generous 1.8” inside diameter designed to accommodate most replacement with no gunsmithing required. CNC machined from 6061-T6 aluminum, suppressors while maintaining a clean and sleek profile. Ventilation cutouts aid these hand guards feature a top Picatinny rail and KeyMod slots on the sides and in rapid cooling, and provide substantial weight reduction. Features integral anti- bottom. Taller than they are wide, this easy to grip configuration is also lighter than rotation tabs. KeyMod slots located at 3, 6, and 9 o’clock positions allowing users to standard plastic hand guards. Available anodized matte black or in Cerakote™ in Dark run with or without rails covers. The rail provides multiple attachment locations for Earth and Olive Drab. Ergo KeyMod accessories including Ergo WedgeLok™ slot covers and as a host to other KeyMod compatible products. Installation is simple using the standard USGI • Aluminum drop-in replacement KeyMod hand guards for AR barrel nut wrench (not included), all necessary mounting hardware is included. carbines • 6061 T6 construction • The ultralight design, 5.6oz, weighs less than standard mili- • Type III Class 2 Hard-coat black anodized finish tary M4 plastic hand guards • Lightweight one piece free float design • The ultra slim profile measures only 2.325” in height and 1.6” • CNC machined aluminum barrel nut allows mount- 4808-BK in width ing of up to 1” diameter barrels • KeyMod slots on both sides and bottom for mounting acces- $206.50 4817-12 • KeyMod design accepts Ergo and all other Key- $191.75 sories as needed Mod compatible accessories • Integral top MIL-STD 1913 Picatinny rail • Full length, seamless Mil-Spec 1913 Picatinny top • Machined from 6061-T6 aluminum rail • Hard coat anodized matte black • Scalloped Picatinny rail slots for comfort • Includes one black rail cover grip to protect the top rail and • 1.8” inside diameter to accept most suppressors for shooter grip and comfort • Integral anti-rotation tabs $227.00 • For AR-15/M16 platforms (Not AR-10, SR25, etc.) • Available with Cerakote™ in either Dark Earth or Olive Drab 4817-15 • Cerakote™ Finish - ASTM • Available in 12” 11oz, and 15” 14 oz length/weight 4808-DE SUPERLITE™ MODULAR KEYMOD RAIL SYSTEM $223.50 he ERGO SuperLite™ Free Float Modular KeyMod Rail System provides a 1.8” T outside diameter and a compact 1.5” inside diameter designed to create a clean and sleek profile. Ventilation cutouts aid in rapid cooling, and provide substantial weight reduction. KeyMod slots located at 3, 6, and 9 o’clock positions allowing us- ers to run with or without rail covers. The KeyMod rail provides multiple attachment locations for Ergo KeyMod accessories including Ergo WedgeLok™ slot covers and as 4808-OD a host to other KeyMod compatible products. Installation is simple using a standard ½” drive 1 3/16” crow foot wrench (not included), all necessary mounting hardware is $223.50 included. • 6061 T6 Construction • Type III Class 2 Hard-coat Anodized Finish • Lightweight one piece free float design • KeyMod design accepts Ergo and all other KeyMod compatible accessories • Full length, seamless Mil-Spec 1913 Picatinny $206.50 4819-12 top rail • Scalloped Picatinny rail slots for comfort • Sleek 1.8” outside diameter and a 1.5” inside diameter • For AR-15/M16 platforms (Not AR-10, SR25, etc.) • Available in 12”, and 15” lengths 4819-15 • Made to VLTOR Weapons Systems KeyMod $227.00 Specifications • Made entirely in the USA. Toll Free 4092-BK Call www.ERGO .net Page 24 Grips 877-281-3783Page 25 ERGO MODULAR M-LOK™ RAIL SYSTEM ERGO SUPERLITE™MODULAR M-LOK™ RAIL SYSTEM

he ERGO Modular M-LOK™ Rail System provides a 2” outside diameter and he ERGO SuperLite™ Modular Free Float M-LOK™ Rail System provides a T a generous 1.8” inside diameter designed to accommodate most suppres- T 1.8” outside diameter and a 1.5” inside diameter designed to create a clean sors while maintaining a clean and sleek profile. Ventilation cutouts aid in rapid and sleek profile. Ventilation cutouts aid in rapid cooling, and provide substantial cooling, and provide substantial weight reduction. The ERGO Modular M-LOK™ Rail weight reduction. M-LOK™ slots are located at the 3, 6, and 9 o’clock positions al- System features integral anti-rotation tabs. M-LOK™ slots are located at the 3, 6, and lowing users to run with or without rail covers. The M-LOK™ rail provides multiple 9 o’clock positions allowing users to run with or without rails. The rail provides mul- attachment locations for Ergo M-LOK™ accessories including Ergo WedgeLok™ slot tiple attachment locations for Ergo M-LOK™ accessories including Ergo WedgeLok™ covers and as a host to all other M-LOK™ compatible products. Available in two slot covers and as a host to all other M-LOK™ compatible products. Manufactured lengths, model #4820-12 12” and model #4820-15 15”. Installation is simple us- entirely in the USA from 6061 T6 aluminum, and Type III Class 2 hard anodized. ing a standard ½” drive 1 3/16” crow foot wrench (not included), and all necessary The ERGO Modular M-LOK™ Rail System is available in two different lengths, model mounting hardware is included. #4817-12 12” weighing 11oz, and model #4817-15 15” weighing 14oz. Installation is simple using the standard USGI barrel nut wrench (not included), and all necessary • 6061 T6 construction • Type III Class 2 Hard-coat black anodized finish mounting hardware is included. • Lightweight one piece free float design • 6061 T6 Construction • M-LOK™ design accepts Ergo and all other M-LOK™ • Type III Class 2 Hard-coat Anodized Finish compatible accessories • Lightweight one piece free float design • Full length, seamless Mil-Spec 1913 Picatinny top rail • CNC machined aluminum barrel nut allows • Scalloped Picatinny rail slots for comfort mounting of up to 1” diameter barrels • Sleek 1.8” outside and a 1.5” inside diameter • M-LOK™ Design to accept Ergo and all other • For AR-15/M16 platforms (Not AR-10, SR25, etc.) M-LOK™ accessories • Available in 12”, and 15” lengths • Full length, seamless Mil-Spec 1913 Picatinny $206.50 • Made to Magpul™ M-LOK™ specifications top rail 4820-12 • Made entirely in the USA. $206.50 • Scalloped Picatinny rail slots for comfort 4818-12 • 1.8” inside diameter to accept most suppressor • Integral anti-rotation tabs • For AR-15/M16 platforms (Not AR-10, SR25, etc.)

$227.00 $227.00 4820-15 4818-15

Toll Free 4092-BK Call www.ERGO .net Page 26 Grips 877-281-3783Page 27 ERGO ALUMINUM, ULTRA-LITE ALUMINUM & POLYMER U.M.P SYSTEM ERGO ALUMINUM KEYMOD U.M.P SYSTEM NIVERSAL MOUNTING PLATFORM Ergo Grip Universal Mounting Platform rgo Grip® is now offering Picatinny rails for direct attachment to KeyMod U (U.M.P.) are perfect for adding picatinny rails to handguards or other ap- E slots. Designated KeyMod Universal Mounting Platform, these rails are per- plications as needed. New Ultra-Lite U.M.P. rails are 33% lighter than regular alu- fect for attaching a section of Picatinny rail to KeyMod Slots where needed without minum U.M.P. having the bulk or weight of a full length rail. Machined from 6061-T6 aluminum • Standard M1913 Picatinny rail configuration and anodized matte black, KeyMod U.M.P. rail sections quickly and easily mount • Anodized flat black aluminum or lightweight polymer construction in KeyMod slots to provide a Picatinny attachment point. U.M.P.s come with all • Includes mounting hardware and ERGO LowPro Rail Covers (polymer) • Mounting does not require alteration of AR Handguard heat shields necessary mounting hardware and are available in multiple lengths as well as a cantilever version for maximum accessory mounting options. 4757 • Standard M1913 Picatinny rail configuration $42.00 • Anodized flat black aluminum • Includes mounting hardware 4753

$30.00 4750 4763-BK 4754 $33.25 $5.75 U.M.P Length Slots $26.00 4751 4764-BK Part # 4763 2.750 in. 5 4752 $8.50 $38.50 Part # 4764 3.925 in. 8 $18.00 Part # 4765 4.700 in. 10 4755 4756-6 Part # 4766 4.40 in. 5- extended 4765-BK $36.00 $12.00 $43.00

U.M.P Length Slots Hole Spacing 4766-BK Part # 4752 2.165 in. 5 0.7 in. $43.00 Part # 4753 6.130 in. 15 2.250, 3.750 - 4.140 in. Part # 4754 4.155 in. 10 1.100 - 2.100 in. Part # 4755 4.155 in. 10 1.100 - 2.100 in. with Radiused Base adaptor Part # 4757 11.875 in. 29 No Holes Polymer Part # 4750 2.170 in. 5 .400 - .875 in. Part # 4751 4.155 in. 10 1.100 - 2.00 in. Part # 4756 5.685 in. 14 .800, 1.700, 2.700, 3.990, 4.825 in. Ultra-Lite Part # 4760 2 in. 5 .07 in. Part # 4761 4 in. 10 1.10 - 2.10 in. Part # 4762 6 in. 15 2.250, 3.750 - 4.140 in.

Toll Free 4092-BK Call www.ERGO .net Page 28 Grips 877-281-3783Page 29 ERGO SLING & MOUNTS

Sling Swivel and Mount Ergo Sling Mount 1.5 Inch • Slides onto Picatinny rails and held in place with • 6061 T6 anodized aluminum rail mount with set screw standard sling loop • Designed for mounting a variety of rail acces- • Attaches with integrated nylon tipped setscrew 4295 sories, including swivel or bipod and jam screw 4293 • Includes installed sling swivel stud • Features a standard AR Sling Loop • Includes allen wrench needed for installation $21.75 • Includes allen wrench needed for installation $25.75 *DUAL USE, COMPATIBLE WITH RIFLES AND SHOTGUNS *DUAL USE, COMPATIBLE WITH RIFLES AND SHOTGUNS 1.5 in.

Ergo Xpress Mounting System Ergo Sling Mount .75 Inch

• Mounts to Picatinny rails • Slides onto Picatinny rails and held in place with • Quickly installed with the use of a single lever set screw • Constructed of 6061 T6 anodized aluminum • Designed for mounting a sling swivel • Includes installed sling swivel stud 4296 *DUAL USE, COMPATIBLE WITH RIFLES AND SHOTGUNS 4291 • Includes allen wrench needed for installation $70.75 *DUAL USE, COMPATIBLE WITH RIFLES AND SHOTGUNS $21.00 .75 in.

HK Style Sling Mount

Nut Bipod Mount • Designed for provide an HK style sling mount on any Picatinny rail • Mounts bipods to Picatinny rails • Constructed of 6061 T6 Anodized Aluminum • Quickly installed with the use of a single carry • Slides onto Picatinny rails handle nut • Held in place with integrated nylon tipped set 4298 • No tools required 4290 screw and jam screw • Constructed of 6061 T6 anodized aluminum • Includes allen wrench needed for installation *DUAL USE, COMPATIBLE WITH RIFLES AND SHOTGUNS $26.75 $47.00 *DUAL USE, COMPATIBLE WITH RIFLES AND SHOTGUNS

Lever Picatinny Mount

• Quickly installed with the use of a single lever • Includes a 1.5” Picatinny Rail section to in- crease rail height by .75” • Constructed of 6061 T6 anodized aluminum 4262 *DUAL USE, COMPATIBLE WITH RIFLES AND SHOTGUNS $70.75

Call Toll Free www.ERGO .net Page 30 Grips 877-281-3783Page 31 ERGO KEYMOD SLING & BIPOD MOUNTS KEYMOD HAND STOP/BARRICADE STOP he KeyMod Hand Stop/Barricade Stop improve performance, safety and ERGO KEYMOD VFG T comfort of any firearm using KeyMod handguards. The Ergo Grip KeyMod he VFG is the most versatile available. As well as serving as a tradi- Hand Stop/Barricade Stop is a rugged, multipurpose accessory built for hard use T tional vertical forward grip, it is small enough to be used like an angled and solid performance. Machined from billet 6061-T6 aluminum and anodized forward grip, or even as a forward hand stop. Very sturdy design. matte black, this multifunction accessory can be used as a hand stop, and as a barricade support device for rock solid shooting from vertical structures. The face • Mounts flush to KeyMod Slots of the stop has an aggressive machined surface for secure support or grip. All • Black anodized 6061-T6 aluminum *COMPATIBLE WITH #4238-BK MOSSBERG SHOTGUN KEYMOD necessary mounting hardware is included. FOREND $43.00 • ERGO KeyMod Hand Stop/Barricade Stop in Black 4231-BK • Aggressive textured front for enhanced traction on bar- ricades and obstacles • Low profile base also functions as a comfortable hand stop 4230-BK • Black Anodized 6061-T6 Aluminum KEYMOD QD SLING MOUNT *COMPATIBLE WITH #4238-BK MOSSBERG SHOTGUN KEYMOD FOREND $53.50 D Sling Mount attaches directly to KeyMod systems, reducing weight and Q bulk by eliminating the need to first use a section of Picatinny rail before attaching the accessory. The KeyMod Quick Detach Sling Mount is a low profile, lightweight, durable accessory designed to add functionality and versatility to any firearm using a KeyMod system. Machined from billet 6061-T6 aluminum and anodized matte black, it lets the user put a QD Sling Mount anywhere on a Key- Mod system where two slots are available.

• KeyMod quick detach mount KEYMOD ENHANCED ANGLE GRIP • Attach QD sling swivel to KeyMod 4239 • Black Anodized 6061-T6 Aluminum • Low profile, light-weight, durable $26.75 he Enhanced Angle Grip is a multifunction KeyMod accessory designed to T improve shooting comfort and performance. The shape and size allow it *COMPATIBLE WITH #4238-BK MOSSBERG SHOTGUN KEYMOD FOREND to function as an angled forward grip improving the thumb-over hold, taking into account the natural angle of the human hand when the support arm is extended forward. The resulting improved weapon and recoil control allows for faster fol- KEYMOD BIPOD MOUNT low up shots and target transitions. The flat rear side also serves as a hand stop. Machined from 6061-T-6 aluminum and anodized matte black, the ergonomically he new KeyMod Bipod mount is also designed to attach directly to KeyMod correct finger grooves have an aggressive pattern machined into the face for a systems to reduce weight and bulk. Machined from 6061-T-6 aluminum and T more secure grip. anodized matte black, it provides a bipod attachment point for any KeyMod hand- guard or forend and is contoured to work perfectly with Harris-Style bipods. All • KeyMod Enhanced Angle Grip mounting hardware is included. • Black anodized 6061-T6 Aluminum • Also can function as a hand-stop • Enhanced thumb-over hold 4234 • KeyMod Bipod Mount 4232 • Contoured to fit Harris-style bipods *COMPATIBLE WITH #4238-BK MOSSBERG SHOTGUN $48.25 • Black Anodized 6061-T6 Aluminum $39.75 FOREND Call Toll Free www.ERGO .net Page 32 Grips 877-281-3783Page 33 ERGO LADDER RAIL COVER GRIPS ERGO RAIL COVER GRIPS rgo ladder rail cover grips are the original Picatinny rail cover, and still E one of the best available. Taking up the smallest amount of space, the ERGO TEXTURED SLIM LINE RAIL COVERS ladder rail cover grips protect Picatinny rails from damage, as well as other rgo Grips’ new Textured Slim Line rail cover grips are made to protect the gear and the shooter form sharp edges. When installed, Ladder Rail Cover Grips provide a comfortable, secure grip. E shooter, rails and other gear from damage and feature Rhino Hide textur- 7-SLOT (3-PACK) ing to provide a great grip. Made from Santoprene, Textured Slim Line rail cover 4378-3PK-BK (BLACK) $19.50 grips fully cover Picatinny rails with the lowest, most comfortable profile pos- • Protects rails from damage and protects shooters 4378-3PK-DE (DARK EARTH) sible. from rail edges. 4378-3PK-OD (OD GREEN) • Protects rails from damage and protects shooters from rail edges. • Prevents damage to skin, gear and clothing that • Prevents damage to skin, gear and clothing that contacts rail edges contacts rail edges 18-SLOT (3-PACK) • Molded in Santoprene® to provide a low profile, rubbery grip surface for improved • Molded in Santoprene® to provide a low profile, 4373-3PK-BK (BLACK) $34.00 weapon control rubbery grip surface for improved weapon control 4373-3PK-DE (DARK EARTH) • 6.8 inches long, easily trimmed for custom fitting • Easily trimmed for custom fitting 4373-3PK-CB (COYOTE BROWN) *COMPATIBLE WITH ERGO TRI RAIL SHOTGUN FORENDS #4870, #4865- SHORT, AND #4865 • Patent #6,725,594 4373-3PK-OD (OD GREEN) 4373-3PK-GG (GRAPHITE GREY) *COMPATIBLE WITH ERGO TRI RAIL SHOTGUN FORENDS #4870, #4865- SHORT, AND #4865 4373-3PK-FG (FOLIAGE GREEN), 4373-3PK-PK (PINK) $34.00 25-SLOT (3-PACK) $51.50 4376-3PK-BK (BLACK) 4379-BK 4379-DE 4379-OD 4376-3PK-DE (DARK EARTH) 4376-3PK-OD (OD GREEN)

4378-3PK-BK 4373-3PK-BK

4376-3PK-BK

4373-3PK-BK 4373-3PK-DE 4373-3PK-OD 4373-3PK-CB

4373-3PK-FG 4373-3PK-GG 4373-3PK-PK Call Toll Free www.ERGO .net Page 34 Grips 877-281-3783Page 35 ERGO FULL COVER RAIL COVER GRIPS ERGO FULL LONG TEXTURED RAIL COVER GRIPS rgo Full Covers Grips are the industry standard for complete, rounded profile rgo Grips Full Long Textured Rail Cover Grips are hard polymer with a tex- E coverage of Picatinny rails. Full covers clip directly onto Picatinny rails to pro- E tured surface to provide an excellent grip while protecting picatinny rails tect the shooter, rails, and equipment from damage. Like all Ergo rail covers, these from damage, or the rails damaging other equipment. Designed to slide on and can be cut to desired length to accommodate mounted accessories. lock in place. Two per pack. • Clips directly onto Picatinny rails for full rail protection $13.25 • Made out of rigid polymer • Molded in Santoprene® to provide a rubbery grip surface for im- • Length: 6.125” long proved weapon control 4360-3PK-BK • Comes two to a pack • Protects unmounted rail areas from damage $11.00 • Prevents damage to gear, such as rappelling ropes, that may be 4335-2PK-BK abraded or cut by uncovered rail sections • 4360 Covers 5 slots, 4361 Covers 10 Slots, 4362 Covers 15 Slots $26.00 • Black 4361-3PK-BK *COMPATIBLE WITH ERGO TRI RAIL SHOTGUN FORENDS #4870, #4865- SHORT, AND #4865 *COMPATIBLE WITH ERGO TRI RAIL SHOTGUN FORENDS #4870, $38.75 #4865- SHORT, AND #4865 4362-3PK-BK 4335-2PK-BK 4335-2PK-DE 4335-2PK-OD ERGO KEYMOD WEDGELOK SLOT COVER GRIPS rgo Grips WedgeLok™ Slot Cover Grips solidly wedge into KeyMod slots to E provide a secure, comfortable grip on handguards or other equipment with KeyMod attachment points. They are made of a rubber like material and are easily 5-SLOT RAIL COVER, SHORT (3-PACK) 4360-3PK-BK (BLACK) 10-SLOT RAIL COVER, MEDIUM (3-PACK) 4361-3PK-BK (BLACK) installed or removed without tools. Each WedgeLok™ Slot Cover Grip uses seven 15-SLOT RAIL COVER, LONG (3-PACK) 4362-3PK-BK (BLACK) KeyMod slots, but can easily be trimmed to length. Their slim design minimizes bulk. Molded with an aggressive texture, they are heat resistant.

• 7-Slot KeyMod WedgeLok™ KeyMod Slot Cover Grip 4 pack ERGO DIAMOND PLATE RAIL COVER GRIPS • Santoprene construction • Heat and chemical resistant $21.75 • Clips directly onto Picatinny rails for full rail protection • Low profile with aggressive texture • Molded in Santoprene® with a distinct diamond plate relief • Available in Black, Dark Earth, OD Green and Graphite Grey pattern that provides a rubbery grip surface for improved firearm control and feel 4330-4PK-BK $38.75 4365-3PK-BK *COMPATIBLE WITH #4238-BK MOSSBERG 4330-4PK-BK 4330-4PK-DE 4330-4PK-OD 4330-4PK-GG SHOTGUN KEYMOD FOREND

4365-3PK-BK 4365-3PK-DE 4365-3PK-OD

*COMPATIBLE WITH ERGO TRI RAIL SHOTGUN FORENDS #4870, #4865- SHORT, AND #4865 Call Toll Free www.ERGO .net Page 36 Grips 877-281-3783Page 37 ERGO EZ MOUNT (KEYMOD) RIGID SLOT RAIL COVERS ERGO M-LOK ™ WEDGELOK™ SLOT COVER GRIP he EZ Mount Slot Covers are molded from hard polymer and aggressively RGO Grips WedgeLok™ Slot Cover Grips solidly wedge into M-LOK™ slots to T textured. These covers provide a durable, easy to grip surface for any hand- E provide a secure, comfortable grip on handguards with M-LOK™ slots. They guard with KeyMod attachment points. Each cover uses two KeyMod slots and is are made from a rubber like material and are easily installed or removed without 1.5” in length. They can be mounted in-line for continuous coverage, or placed only tools. Each WedgeLok™ Slot Cover Grip covers 4 M-LOK™ slots, but can easily be where needed. The EZ Mount Slot Covers can be mounted in either direction, and trimmed to length. Their slim design minimizes bulk. Molded with an aggressive all necessary hardware is included. texture, they are heat and chemical resistant.

• Rigid Polymer EZ Mount Slot Cover Grip 3 Pack • M-LOK™ WedgeLok™ Slot Cover Grip • Each piece covers two KeyMod slots • Available in black, Dark Earth, Olive Drab and Graphite Grey • Santoprene Construction/Heat Resistant $11.75 • Positive non-slip gripping surface 4331-3PK-BK • Low profile with aggressive texture • 6 1/4” long and 5/8” wide • Covers 4 M-LOK™ slots *COMPATIBLE WITH #4238-BK MOSSBERG • Patent Pending SHOTGUN KEYMOD FOREND $21.75 4332-4PK-BK

4332-4PK-OD 4332-4PK-GG 4332-4PK-BK 4332-4PK-DE

ERGO TACTICAL LIGHT SWITCH MOUNT KIT

• Firmly attaches first generation Surefire and Insight Technologies pressure switches to Picatinny rails. • Each kit includes unique switch holders for each pressure switch type. • Molded in Santoprene® • Switch and light not included

ERGO LADDER WIRE LOOM RAIL COVER *DUAL USE, COMPATIBLE WITH RIFLES AND SHOTGUNS $16.50 5 Slot Rail Cover • Quickly and reliably secures switch/optical wires to Picatinny rails, elimi- nating untimely and disruptive snags • Protects rails from damage and protects shooters from rail edges • Prevents damage to gear and clothing that contacts rail edges 4380-BK • Molded in Santoprene® to provide a low profile, rubbery grip surface for improved weapon control 4366KT-BK 4366-KT-DE • Easily trimmed for custom fitting $6.75

*COMPATIBLE WITH ERGO TRI RAIL SHOTGUN FORENDS #4870, #4865- SHORT, AND #4865 4380-DE

Call Toll Free www.ERGO .net Page 38 Grips 877-281-3783Page 39 Handgun grips 1911 Ruger S&W Beretta

www.ERGOGrips.net ERGO WARRIOR 1911 GRIP HANDGUN GRIPS arrior grips are unique in that they combine two different materials and tex- W tures for the best possible feel, control and durability. A rubber insert is sur- rounded by a rigid polymer frame. This gives the shooter a comfortable, very secure ERGO DELTA GRIP grip that is protected from damage. he Delta Grip is the first truly ergonomic grip for J Frame revolvers. • Constructed of rigid polymer frame with soft rubber insert molded in, providing T Designed for the most important part of the gun, the shooter, the enhanced weapon control even with the interfering presence of moisture and debris Delta Grip was engineered to fit the natural point of aim and mechanics of • Duty and competition proven SUREGRIP™ feel on a square bottom design the human hand, wrist and arm. The result is a grip with a superior natural point of aim, comfort and control. $32.25 $26.75 DELTA GRIP S&W J FRAME 4523-BK 4583-RUG-BK • Design Patent D734418 • Ergonomic design • Better natural pointing and aiming • Textured rubber is over molded a rigid polymer core for a comfortable, secure grip • Fits round butt J Frames DELTA GRIP RUGER LCR / LCR X FRAME -BLACK 4523-BK 4523-DE • Same features as the S&W • One piece design for a clean look and feel $26.75 ERGO XT/XTO 1911 GRIPS HARD RUBBER 4581-SWJ T grips are an excellent upgrade to any 1911 pistol. Aggres- X sively textured hard polymer construction provides a posi- tive grip in any situation, and durable for any condition. • Heavily textured, minimally abrasive hard rubber design • Fits Standard Model 1911 frames • Thin profile attaches with standard grip screws • Designed to accommodate ambidextrous safety options • Available in tapered (4511), or square bottom (4510-BK) design for proper fit with mag wells

4510-BK $26.75

4511-BK 4511-DE 4511-OD TAPERED SQUARE BOTTOM

OFFICERS MODEL 1911

4520-BK Call Toll Free www.ERGO .net Page 42 Grips 877-281-3783Page 43 ERGO RUGER MKII & MKIII SERIES ERGO BERETTA SERIES rgo grip products are designed to fit the shooter, and the Ergo Be- rgo grip products are designed to fit the shooter, and the Ergo Ruger E retta grips are no exception. With shapes and contours not found on E grips are no exception. With shapes and contours not found on the the stock grips, the Ergo grips offer a comfortable, more consistent grip for stock grips, the Ergo grips offer a comfortable, more consistent grip for better shooting. better shooting.

4580-BK

$26.75 4540-BK

4580-BK 4580-BL 4580-PK 4580-RD $26.75

• Competition tested ambidextrous palm swell provides a 4540-BK 4540-DE more consistent grip • Uniquely textured injection molded polymer reduces slip- • Competition tested ambidextrous palm swell provides a page during active firing more consistent grip • Installs with factory screws • Uniquely textured injection molded polymer reduces slip- page during active firing • Installs with factory screws

ERGO GRIPITS elf-adhesive ERGO GRIPITS are applied to any S smooth surface of a pistol or rifle where im- proved grip and weapon control is needed.

4555 $5.75

Call Toll Free www.ERGO .net Page 44 Grips 877-281-3783Page 45 SHOTGUN ACCESSORIES ERGO KEYMOD RAIL SHOTGUN FOREND eyMod forend for Mossberg 500 pump action shotguns. Slim in profile and K lightweight, this machined aluminum forend has KeyMod accessory slots on ERGO TRI RAIL SHOTGUN FORENDS the sides and bottom. Designed for performance and versatility, this upgrade to the ade from aluminum, perfectly sized and easy to install, Ergo’s Tri Rail venerable Mossberg 500 allows users to mount Picatinny rails or KeyMod acces- M forends are the quickest and best way to add Picatinny accessory rails to sories only where necessary, eliminating the bulk and weight of snag prone, Pica- the Remington 870 or Mossberg 500. Each Tri Rail comes with three of Ergo Grips tinny rail sections that are not in use. Machined from 6061-T6 aluminum and hard Ladder Rail Covers. The other rail covers such as Ergo Grips’s Slim Lines or Full coat anodized matte black. Installation is simple and is the best way for shooters Rail covers can be used to customize the grip as needed. to add the KeyMod accessory attachment system to their Mossberg 500 shotgun. Remington 870 Simply remove the factory forend and replace with the Ergo Grip KeyMod version. • Constructed of 6061 T6 anodized aluminum Install Ergo Grip’s WedgeLok or EZ Mount KeyMod Slot covers for an even more • Includes Black ERGO LowPro Rail Covers comfortable grip.

• REMINGTON 870 - 4870 • Keymod forend for Mossberg 500 • MOSSBERG 500/590 - SHORT (5-13/16” TUBE 4870 • Keymod rails at 3, 6, and 9 o’clock LENGTH) - 4865-SHORT • Extremely light-weight and low profile • MOSSBERG 500/590 - STANDARD (6-15/16” $96.00 • Black anodized 6061-T6 Aluminum TUBE LENGTH) - 4865 Mossberg 500 • 6 15/16” length

4238 $117.25 4865 ERGO TACTICAL STOCK ADAPTERS $96.00 se any style AR type collapsible buttstock and pistol grip combination U These stock adapters have the proper drop designed in, so factory sights can be used. (Bead, Rifle, and Ghost Ring Sights) Made from glass filled polymer. Includes mounting hardware 4865-SHORT Remington 870 Mossberg 500 $96.00

ERGO SHOTGUN FOREND REMOVAL TOOL 4453-REM 4454-MOSS $39.00 $39.00

• The Shotgun Forend Removal Tool is designed to help in the removal of the shotguns forend • Used for most pump action shotguns 4963 • All steel construction with black oxide finish $19.50

Call Toll Free www.ERGO .net Page 46 Grips 877-281-3783Page 47 ERGO ACCESSORIES

4971 $5.75 4959 $9.00 Ergo Stock Tube Wrench Ergo Castle Nut $7.00 $6.75 • Manufactured from heat treated steel • Standard mil spec CAR castle nut • Rubberized Grip 4612 4611 • Made from steel and coated black Performs the job of a: 9 Piece Lower Receiver Spring Kit 5 Piece Upper Receiver Spring Kit • Mil-Spec Castle Nut Wrench • Standard Length Receiver Extension Wrench Includes the following springs: Includes the following springs: • Bolt Catch Spring • Ejector Spring • Disconnector Spring • Forward Assist Spring • Buffer Retainer Spring • Port Cover Spring • Trigger Spring • Extractor Spring • Magazine Catch Spring • Extractor Spring Buffer • Hammer Spring • Selector Spring $50.75 • Two Detent Springs $27.00 4822 4821 Low Profile Adjustable Gas Block Low Profile Gas Block • CNC machined 4140 chromoly steel • CNC machined 4140 chromoly steel • Full shutoff with zero adjustment movement • Nitride/Melonite QPQ finish • Nitride/Melonite QPQ finish • Chamfered edge, slip on fit • Chamfered edge, semi-press fit 4961 • USA made steel & machined in the USA • USA made steel & Machined in the USA $18.50 • Weighs 2oz • Weighs 2oz Ergo Carbine Buffer • Fits under most free float handguards • Fits under most free float handguards • Internal Diameter 0.750 • Internal Diameter 0.750 For use with an A-4 Collapsible Butt Stock • Includes (2) set screws for a secure attachment • Same profile/height as the standard low-profile such as the ERGO F93 ProStock • Accepts standard gas tube roll-pins (roll pin gas block NOT included) • Includes (2) set screws for a secure attachment • Includes 10-32 Set-Screw and a 4-40 Retaining Screw (Rearward facing) $8.50 • Accepts standard gas tube roll-pins but, a roll-pin 4960 is NOT included Ergo AR15 Action Spring • Carbine Length Action Spring for AR-15 and ERGO Carbine Length Gas Tube M4 Adjustable Stocks 4823 • Carbine Length gas tube • Made to M4A1 Mil-Spec specifications • Precision made stainless steel carbine length gas tube $16.50 • Includes roll pin

Call Toll Free www.ERGO .net Page 48 Grips 877-281-3783Page 49 ERGO DOUBLE SLING LOOP SHOTGUN ENDPLATES

nstalled between the butt stock and receiver, these adapt- I er plates make it easy to use a sling with a shotgun. 4931 4988 • Constructed of 6061 T6 anodized aluminum • For ambidextrous mounting of slings • 12 ga. only $5.75 $3.50

Ergo PicTool Ergo AR Wedge • The Ergo Pictool is a durable polymer tool • Useful for reducing the amount of move- useful for removing LowPro rail covers ment between the upper and lower receiver • Also can be used for starting take down on an AR15 pins on AR15s • Large enough so you can trim to fit • Multiple colors, will be shipped random 4969-MOSS 4972-REM colors $28.25 $28.25

ERGO DOUBLE SLING LOOP AR15 ENDPLATE 4930-KEYRING $4.00 4930-KEYRING-BK Ergo Keyring Mini Mag Loader/Unloader

• Low profile key ring magazine loading tool for .22 button mags (Ruger, Hi Standard, Brown- 4970 ing Buckmark, etc.) $11.00 • Made in a variety of colors, Color chosen at random Double Loop Sling Plate

• Ambi Loop Endplate for AR15s provides $6.75 $4.50 $6.75 the shooter with a loop on both sides of the 4984-3PK-YL 4985-OR 4986-3PK-OR receiver to mount a single point sling

ERGO Single Point Bungee Sling with Mash Hook 4984-3PK-OR 4985-YL 4986-3PK-YL • Designed to provide maximum weapon maneuver- ability and retention Rifle Shotgun Pistol • Integrated bungee minimizes shooter fatigue and increases shooter comfort Ergo Empty Chamber Flags • Includes mash hook for positive sling attachment • Provides immediate visual recognition of an empty chamber on multiple • The ERGO Single Point Bungee Sling is designed • Weapon platforms including semi-auto pistols. (or shotguns with the shotgun chamber flag) to provide maximum weapon maneuverability and 4974 • Constructed of injection molded polymer retention $43.00 • Available in high visibility orange and yellow Call Toll Free www.ERGO .net Page 50 Grips 877-281-3783Page 51 Based in Moriarty, New Mexico, ERGO Grip develops and ERGO ARMORER BLOCK manufactures small arms accessories for civilian, law enforcement and military use worldwide with the goal his is one of the most useful maintenance accessories available for an AR to provide all shooters with the finest firearms acces- T rifle. Simply bolt or clamp securely to a bench or other work surface, place sories available. ERGO Grip products are designed an AR rifle onto the block inside the magazine well and the rifle is held in place for the most important part of the firearm: the shooter. for cleaning, maintenance or storage. Available for AR-15 and AR-10 style rifles. ERGO GRIPS WARRANTY POLICY AR10 All ERGO Grip products are made in the U.S.A. to the highest standards. ERGO 4989 Grip products are backed by a limited lifetime warranty. At the discretion of the $26.75 company, ERGO Grip will replace or repair any ERGO product should it fail to work due to normal use. Refunds must be handled by the company who sold the • 1-piece glass filled polymer design product • Fits rifles that use SR-25 pattern magazines Please contact Customer Service at 877-281-3783 for assistance. • Weight: 7oz • 6-1/8” tall x 2” long (at the base) x 4-1/4” wide (at the base) ERGO GRIPS MILITARY & LAW ENFORCEMENT PROGRAM • 1/4” mounting holes For details, please contact Customer Service at 877-281-3783.

Ordering information Secure Online Ordering: www.ErgoGrips.net Toll Free Ordering: 877-281-3783 Email Ordering: [email protected]

AR15 Shipping and Handling Information 4996 Most U.S. orders to the lower 48 states are shipped via UPS. International/ Overseas orders shipped U.S.P.S. Priority. For special instructions or shipping $26.75 charges on larger orders, please contact customer service at 877-281-3783.

• 1-piece glass filled polymer design • Weight: 4.3oz • 6 1/8” Tall X 4 5/16” Long (at the Base) X 2” Wide (at the Base) • 1/4” Mounting Holes Notice: Any firearms shown in this catalog are presented for demonstration of product only and are not for sale. Falcon Industries, ERGO, ERGO Grip, ERGO Grip Product, ERGO Tactical, Ambi, SureGrip, Rhino Hide, Gripit, Pro Stock, ARGO Grip, SWIFT GRIP, DELTA Grip and Gapper are trademarks of Falcon Industries, Inc *INFORMATION AND PRICES IN THIS CATALOG SUBJECT TO CHANGE WITHOUT NOTICE.

Call Toll Free www.ERGO .net Page 52 Grips 877-281-3783Page 53 Call Toll Free www.ERGOGrips.net 877-281-3783 Email: [email protected]