Avicenna's Creams & Lotions

Total Page:16

File Type:pdf, Size:1020Kb

Avicenna's Creams & Lotions Avicenna’s Creams & Lotions A booklet explaining the nature and uses of Avicenna’s creams & lotions for health and beauty Produced by Avicenna Bidarren, Cilcennin, Lampeter, Ceredigion, Wales SA48 8RL Tel :01570 47 1000 e-mail: [email protected] www.avicennaherbs.co.uk Contents Page Introduction 2 How Are Creams and Lotions Made 3 Active Ingredients of The Oil Phase 5 Active Ingredients of The Water Phase 9 Preservative Systems 15 Avicenna Product Range 16 Damask Rose Nourish and Hydrate Face Formulation 16 Damask Rose Nourish and Hydrate Lotion Formulation 16 Rose Geranium Combination-Skin Face Formulation 16 Rose Geranium Combination-Skin Lotion Formulation 17 Lavender Everyday Cream 17 Lavender Everyday Body Lotion 18 Chamomile Sensitive Skin Milk 18 Neroli Repair and Rejuvenate Face Formulation 19 Neroli Repair and Rejuvenate Lotion Formulation 19 Witch-hazel lotion 19 Extra-Rich Hemp Seed Cream 20 Peppermint Foot and Hand Refresher 20 Frankincense and Myrrh Regeneration Body Balm 21 Ti-Tree Anti-Breakout Lotion 22 Marigold Cream 22 Comfrey Cream 23 Saint Johns Wort Cream 23 Chickweed cream 24 Echinacea cream 24 Liquorice cream 24 Thuja cream 25 Rheuma cream 25 Venotone 26 Clinicare Cream 26 Avicenna’s Skin Kalm Formulation 27 Made to Order Service 28 1 INTRODUCTION Increasingly, it is being recognised that we may absorb up to a third of the substances that we put on our skin. It is no wonder then that many people are becoming more aware of the types of products they use on their skin, and have greater interest in the ingredients, preservatives and perfumes used in creams and lotions. It is with this in mind that we at Avicenna have been formulating creams of exceptional quality. Working with a highly experienced chemist, we have been experimenting with different formulations, oils, preservative systems and active ingredients. We have developed two broad ranges of creams; firstly there are those creams with a more cosmetic focus. Within this range, we have concentrated on getting the right consistency and aroma to make products that are lovely to use as well as being effective. Moreover, these creams are in effect aromatherapy treatments as they all contain aromatic waters and essential oils that provide mental and emotional benefits in addition to the effects on the skin. We have catered for all skin types in the cosmetic range, and to cover all areas of the body. Secondly there is a range of more medicinally orientated creams and lotions, which are slightly heavier due to the higher oil content. There is however a large overlap between the two groupings, with all the creams having therapeutic properties in addition to being lovely to use. All the creams and lotions are made from very high quality, mostly organic aromatic waters, vegetable oils, macerated oils, essential oils and herbal percolates decoctions and infusions. Almost all of the active ingredients are made at Avicenna, including all of the aromatic waters and herbal decoctions and infusion, all of the macerated oils and some of the essential oils. Where we have had to source ingredients, we have worked hard to find the right quality, often rejecting many samples on the way. In standard creams and lotions, the greatest ingredient is usually ‘aqua’ or water. However, we never add water to the creams (apart from the base cream) - we either use an aromatic water, or herbal infusion/decoction or both. And we have spared no expense when it comes to using the right vegetable oils for our creams; rose hip oil, shea butter, evening primrose oil and avocado oil are all expensive oils that tend to be added in tiny amounts, if they are used at all. We have ensured that these ingredients are added at adequate levels. In the next section, a brief summary of the nature and properties of the active ingredients used in the creams is given. The second section gives a brief outline of Avicenna’s approach to preserving creams. The third section is a description of each of our products, with suggestions for skin type and uses. In the final section, our unique made to order service is explained, and an order form is enclosed. 2 HOW ARE CREAMS AND LOTIONS MADE? A cream is basically a mixture of oil and water. As you know oil does not readily dissolve or disperse in water, so to allow this to happen, a dispersing agent called an emulsifier is added to the mixture. A cream is therefore a type of emulsion, made of a water phase and an oil phase. Emulsifiers ‘Unite’ Oil with Water Emulsifiers are substances that have the ability to react with both oil and water. One piece of an emulsifier molecule joins to the molecules of water and another piece joins to the molecules of oil. This allows the oil to disperse as very fine droplets surrounded by emulsifier molecules, into the water medium. The emulsifier is often a waxy substance (e.g.: Glyceryl Stearate), which is melted into the oil before it is added to the water. ‘Oil in Water’ and ‘Water in Oil’ Emulsions Oil in water emulsions are prepared by dispersing a lesser quantity of oil in a greater quantity of water. The oil phase is called the ‘internal phase’ because the emulsifier molecules enclose the minute oil droplets as they disperses them through the water medium, which is referred to as the ‘external phase’. The oil is ‘wrapped within the water’. Such creams have a lighter feel, are more easily absorbed into the skin without leaving an oily residue. Water in oil emulsions are prepared by dispersing a lesser quantity of water into a greater quantity of oil. Water here is the internal phase because the emulsifier molecules wrap round the minute water droplets as they disperse through the medium of oil, which is the external phase. Such creams tend to have an oily feel and are used to provide an oily barrier, which protects the skin and reduces the loss of moisture in conditions like eczema. The Water Phase Water constitutes the major ingredient (61-77%) of most creams, and more so in lotions. The lighter and more cosmetic-type creams contain more water and less oil. This phase contains the water-soluble herbal ingredients of a cream. In Avicenna’s creams, the water phase is never tap or deionised water as is the case with most creams, except in our base cream. We always incorporate beneficial high quality active ingredients into the water phase in the form of distilled aromatic waters, strong infusions and decoctions and cold percolates of organic herbs. 3 The Oil Phase Oils make up, anywhere between 11 and 24% of the bulk of a cream. The heavier purely medicinal creams contain a higher proportion of oil but water is still their major ingredient. Oil-soluble herbal ingredients like resins dissolve and become incorporated into this phase which gives creams a richer and heavier feel. Many oils are susceptible to oxidation or rancidification over a period of time. This process is hindered by the addition of antioxidants like vitamin E, to all our creams and lotions. Making a cream The ingredients of the water phase are heated gently until their temperature reaches 70-75 Degrees C. Simultaneously, the ingredients of the oil phase are heated gently in a separate container again to a temperature of 70-75 Degrees C. When both phases get to the required temperature the oil phase is poured gradually into the water phase. As this is taking place the mixture is whisked vigorously using a high sheer mixer, which breaks the oil, emulsifier, and water particles into minute droplets. This greatly facilitates the dispersion of oil into water and enhances the stability of the emulsion. A creamy texture forms after a few minutes of high-sheer high-speed mixing. This is then transferred to a low-shear low-speed stirrer, which gently mixes and turns the cream giving it body and gradually cooling it down. When the temperature of the cream drops down to around 40 Degrees C, heat sensitive ingredients like essential oils and some preservatives are added and stirred in for a few more minutes to ensure uniform dispersal. Here is your cream or lotion, which is now left overnight to cool to room temperature, then filled into sterile containers and sealed. 4 ACTIVE INGREDIENTS OF THE OIL PHASE Macerated Oils Fixed Oils Essential Oils Macerated Oils – How do we make them? Our macerated oils are made by steeping the specified organic herb in a specified organic vegetable oil for a period of one month. Some oils are macerated in clear glass containers and exposed to sunlight throughout this period to affect their extraction, e.g.: St. John’s wort oil and marigold oil. Others are macerated in the dark at 37 Degrees C (body temperature), and some oils are extracted at higher temperatures. In order to assist the active herbal ingredients to dissolve into the oil, the container is shaken vigorously from time to time during the maceration period. When ready, the oil-herb mixture is placed into a muslin bag in an herb press and the oil pressed out, left to sediment and then filtered. Finally, Vitamin E is added to protect the oil from oxidation (rancidification) and the macerated oil stored, with minimum headspace, in a cool dark location. Macerated Oils used in Avicenna’s Creams & Lotions Chickweed Oil: Chickweed herb is traditionally used externally for soothing itchy skin conditions such as eczema and pruritis from a variety of causes. It is used as the main oil phase of the chickweed cream. Comfrey Oil: Comfrey herb contains the now famous allantoin, which aids the regeneration of all tissues in the body.
Recommended publications
  • Impact of Lipid Sources on Quality Traits of Medical Cannabis-Based Oil Preparations
    Article Impact of Lipid Sources on Quality Traits of Medical Cannabis-Based Oil Preparations Alberto Ramella 1, Gabriella Roda 2, Radmila Pavlovic 3,*, Michele Dei Cas 4, Eleonora Casagni 2, Giacomo Mosconi 3, Francisco Cecati 5, Paola Minghetti 2 and Carlo Grizzetti 6 1 Farmacia Dott.ri Giuliana e Alberto Ramella–SAS, Via A. Diaz 1, 21021 Angera (VA), Italy; [email protected] 2 Department of Pharmaceutical Sciences, Università degli Studi di Milano, Via L. Mangiagalli 25, 20133 Milan, Italy; [email protected] (G.R.); [email protected] (E.C.); [email protected] (P.M.) 3 Department of Health, Animal Science and Food Safety, University of Milan, 20133 Milan, Italy; [email protected] 4 Department of Health Sciences, Università degli Studi di Milano, Via A.di Rudinì 8, 20142 Milan, Italy; [email protected] 5 INTEQUI-CONICET, Faculty of Chemistry, Biochemistry and Pharmacy, National University of San Luis, Almirante Brown 1455, CP 5700 San Luis, Argentina; [email protected] 6 S.S.D. Cure Palliative e Terapia del Dolore, Ospedale di Circolo–Fondazione Macchi, ASST Sette Laghi, Viale L. Borri 57, 21100 Varese, Italy; [email protected] * Correspondence: [email protected] Academic Editor: Maria Carla Marcotullio Received: 2 June 2020; Accepted: 29 June 2020; Published: 30 June 2020 Abstract: The feasibility of the use of two lipid sources and their impact on the cannabinoid profile, terpene fingerprint, and degradation products in medical cannabis oil preparations during 3 months of refrigerated storage time were investigated. LCHRMS-Orbitrap® and HS-SPME coupled to GC- MS for the investigation of targeted and untargeted cannabinoids, terpenes, and lipid degradation products in Bedrocan® and Bediol® macerated oils were used as analytical approaches.
    [Show full text]
  • Impact of Lipid Sources on Quality Traits of Medical Cannabis-Based Oil Preparations
    molecules Article Impact of Lipid Sources on Quality Traits of Medical Cannabis-Based Oil Preparations Alberto Ramella 1, Gabriella Roda 2, Radmila Pavlovic 3,*, Michele Dei Cas 4 , Eleonora Casagni 2, Giacomo Mosconi 3, Francisco Cecati 5, Paola Minghetti 2 and Carlo Grizzetti 6 1 Farmacia Dott.ri Giuliana e Alberto Ramella–SAS, Via A. Diaz 1, 21021 Angera (VA), Italy; [email protected] 2 Department of Pharmaceutical Sciences, Università degli Studi di Milano, Via L. Mangiagalli 25, 20133 Milan, Italy; [email protected] (G.R.); [email protected] (E.C.); [email protected] (P.M.) 3 Department of Health, Animal Science and Food Safety, University of Milan, 20133 Milan, Italy; [email protected] 4 Department of Health Sciences, Università degli Studi di Milano, Via A.di Rudinì 8, 20142 Milan, Italy; [email protected] 5 INTEQUI-CONICET, Faculty of Chemistry, Biochemistry and Pharmacy, National University of San Luis, Almirante Brown 1455, San Luis CP 5700, Argentina; [email protected] 6 S.S.D. Cure Palliative e Terapia del Dolore, Ospedale di Circolo–Fondazione Macchi, ASST Sette Laghi, Viale L. Borri 57, 21100 Varese, Italy; [email protected] * Correspondence: [email protected] Academic Editor: Maria Carla Marcotullio Received: 2 June 2020; Accepted: 29 June 2020; Published: 30 June 2020 Abstract: The feasibility of the use of two lipid sources and their impact on the cannabinoid profile, terpene fingerprint, and degradation products in medical cannabis oil preparations during 3 months of refrigerated storage time were investigated. LCHRMS-Orbitrap® and HS-SPME coupled to GC-MS for the investigation of targeted and untargeted cannabinoids, terpenes, and lipid degradation products in Bedrocan® and Bediol® macerated oils were used as analytical approaches.
    [Show full text]
  • The Re-Extraction of Oil from Oil Palm Empty Fruit Bunch Residues and Oil Palm Mesocarp Fibers and Measures in Reducing Greenhouse Gas Emission
    Asian J Agri & Biol. 2017;5(4):3 -3 5. Original Research Article 37 4 AJAB The re-extraction of oil from oil palm empty fruit bunch residues and oil palm mesocarp fibers and measures in reducing greenhouse gas emission Hotman Manurung*1,2 , Jansen Silalahi3, Donald Siahaan4, Elisa Julianti5 1Study Program of Natural Resource and Environmental Management, Graduate School University of Sumatera Utara, Jalan. Prof. Maas, Medan, Indonesia, 20155 2Department of Agricultural Products Technology Faculty of Agriculture, University of HKBP Nommensen, Jalan Sutomo No.4A Medan 20234 3Department of Pharmaceutical Chemistry, Faculty of Pharmacy, University of Sumatera Utara, Jalan. Tri Dharma No. 5 Medan 20155 4Indonesian Oil Palm Research Institute, Jalan. Brigjen Katamso 51 Medan 20158 5Department of Food Science, Faculty of Agriculture, University of Sumatera Utara, Jalan. Prof. Sofyan No. 3 Medan 20155 Received: August 30, 2017 Abstract Accepted: Oil palm Mill (POM) produces oil palm empty fruit bunches (EFBs) and oil palm October 11, 2017 mesocarp fibers (OPMF) which still contain oil and carotenoids. POM utilizes EFBS Published: and OPMF as a fuel to heat up the boiler and to generate electrical energy leading to December 17, 2017 the dissolve of oil and carotenoids in vain and causes greenhouse gas (GHG). The research is aimed at isolating and investigating the quantity and quality of oil of EFBS and OPMF, OPMF oil characteristics comprising of fatty acid composition and antioxidant activity and to determine the effect of GHG emission reduction after OPMF oil is macerated. The residual sample used is collected from 4 POMs. Oil isolation was done by maceration.
    [Show full text]
  • Management Plan for a One Planet Development on Fields Formally Part of Rhyd Gorwen Farm, Hebron James and Clare Adamson, Summer 2017
    Management Plan for a One Planet Development on fields formally part of Rhyd Gorwen Farm, Hebron James and Clare Adamson, Summer 2017 CONTENTS Page no. 1. Introduction & Summary 3 2. Baseline 4 3. Design Strategy 8 4. Business and Improvement Plan 17 4.1. Land Based Activity 17 4.2. Land Management 42 4.3. Energy & Water 47 4.4. Waste 55 5. Zero Carbon Buildings 58 6. Community Impact 64 7. Transport Assessment and Travel Plan 67 8. Phasing, Monitoring and Exit Strategy 73 9. Ecological Footprint Analysis 75 10. Appendices 10.1. Enterprise: cost/forecast spreadsheets x 5 10.2. Ecological Footprint: data entry sheet and breakdown of results 10.3. Ecological Survey report 10.4. Site Layout Design 10.5. Soil Analysis report 10.6. Scaled drawings of buildings: dwelling, wood store, coldstore, workshop, polytunnels, cow barn (existing and proposed extension), processing barn 10.7. Letter of support 10.8. Visual Impact Report 10.9. Highways Report 10.10. Block Plan 10.11. Crop Charts: Tree Bush crops, Veg. Production, Perennial Crops 10.12. LANDMAP reports 10.13. Soil Association Organic Certificate 10.14. Energy Efficiency Assessment of Dwelling Construction Materials 10.15. Detailed Site Plan 10.16. Location plan 2 1. INTRODUCTION & SUMMARY Introduction This is an application for a low impact development under the Welsh Assemblies planning policy TAN6, One Planet Development. It has been compiled and written by Clare and James Adamson, with support from professionals including Paddy Jenks of Aderyn Ecology, Karl von Weber of LVW Highways and Martin Crawford of Agroforestry Research Trust.
    [Show full text]
  • Carrier Oils in Dermatology
    Archives of Dermatological Research (2019) 311:653–672 https://doi.org/10.1007/s00403-019-01951-8 REVIEW Carrier oils in dermatology Ané Orchard1 · Sandy F. van Vuuren1 Received: 26 March 2019 / Revised: 24 June 2019 / Accepted: 4 July 2019 / Published online: 18 July 2019 © Springer-Verlag GmbH Germany, part of Springer Nature 2019 Abstract Wounds are a common medical infiction. With the increase in microbial resistance and a shift of interest towards comple- mentary medicines, essential oils have been shown to be benefcial in suppressing microbial growth. However, in practice, essential oils are more often diluted into a base due to the risk of topical adverse efects, such as dermatitis. There is a lack of collated evidence-based information on toxicity and efcacy of carrier oils. The current information on the subject matter is restricted to generic, aroma-therapeutic books and pamphlets, based on anecdotal evidence rather than an experimental approach. Therefore, this review aimed at identifying the recommended carrier oils used in dermatology and thereafter col- lating the scientifc evidence to support the use of carrier oils together with essential oils recommended for dermatological use. Aloe vera gel had multiple studies demonstrating the ability to enhance wound healing; however, several other carrier oils have been largely neglected. It was observed that the extracts for certain plant species had been used to justify the use of the carrier oils of the same plant species. This is an inaccurate cross assumption due to the diference in chemical composi- tion and biological activities. Lastly, despite these carrier oils being recommended as a base for essential oils, very little data was found on the interactive profle of the carrier oil with the essential oil.
    [Show full text]
  • International Journal for Recent Engineering Research And
    International Journal of Recent Engineering Research and Development (IJRERD) Volume No. 02 – Issue No. 01, ISSN: 2455-8761 www.ijrerd.com, PP. 75-80 STUDIES ON MANUFACTURING PROCESSES OF TAMARIND OIL, BIODEGRADABLE PLASTIC AND RELATED PRODUCTS FROM TAMARIND- A REVIEW Miss. Payal N. Bhautik1 , Assistant Profesor Department of Chemical Engineering, Shram Sadhanda Bombay Trust’s College of Engineering and Technology, Bambhori, Jalgaon-425001 Abstract: Tamarind is one of the best vegetable products which are largely used by the domestic people as well as in the hotel industries, dhabas and restaurants for the food preparation as sour taste. After extraction of pulps from tamarind there is bye product of tamarind seed. Tamarind seed is largely used for the manufacturing of low cost tamarind seed flour. There is abundant amount of tamarind available in India, but there are very rare uses of tamarind as basic industrial raw material. Manufacturing of tamarind seed oil will be commercial exploitation of tamarind seed. It has very good scope in India as well as it can be exported for the pharmaceutical base products too. 7-10% oil is available in the tamarind seed. After the extraction of tamarind oil de-oiled cake is remains which are used in medicine and also used for the production of biodegradable plastic by extraction of starch. It can be extracted by using hexane, ether, toluene dichloromethane as solvent for extraction of tamarind seed oil. There is about 30% vegetable oil storage in our country which meat up by importing of vegetable oil. There is good market potentiality of the tamarind seed oil.
    [Show full text]
  • Aromatherapy
    Aromatherapy Module 2 Methods of Extraction Manual compiled by Dr Gaynor du Perez METHODS OF EXTRACTION Copyright © 2016 All Rights Reserved No part of this book may be reproduced or distributed in any form or by any means without the written permission of the author. Essential oils are derived from the flowers (e.g. chamomile), leaves (e.g. tea-tree), seeds (e.g. black pepper), fruit rind (e.g. lemon), heartwood (e.g. sandalwood), bark/sap/resin (e.g. frankincense) and rhizomes/roots (e.g. ginger) of aromatic plants. The word “oil” is misleading, as essential oils are not oily, but are volatile essences which, if exposed to air, will evaporate quickly. Unfortunately, extracting essential oils is not an easy process . Invariably the method of extraction either affects the chemical make-up of the oil, adds other components or both. The overriding objective is to cause the least amount of aggression and interference, resulting in oils as close as possible to their natural composition. Historically, distillation was the only method that produced what was termed essential oil. However, whilst it does facilitate the collection of the favourable tiny, volatile, aromatic molecules from the plant, distillation is far from perfect. The aggressive use of heat alters the chemical composition of the oil and some oil is lost through evaporation. Some methods of extraction produce aromatic substances which, although highly perfumed and possessing some therapeutic properties, are not actually classified as essential oils. This does tend to get a little confusing, particularly as many refer to all aromatic products as essential oils.
    [Show full text]
  • (12) Patent Application Publication (10) Pub. No.: US 2014/0356295 A1 Gerardi Et Al
    US 20140356295A1 (19) United States (12) Patent Application Publication (10) Pub. No.: US 2014/0356295 A1 Gerardi et al. (43) Pub. Date: Dec. 4, 2014 (54) COSMETIC COMPOSITIONS COMPRISING A61O 19/02 (2006.01) TOBACCO SEED-DERVED COMPONENT A61O 19/04 (2006.01) A61O5/00 (2006.01) (71) Applicant: R.J. REYNOLDS TOBACCO A61O 19/08 (2006.01) COMPANY, Winston-Salem, NC (US) A61O 19/10 (2006.01) A61O 19/00 (2006.01) (72) Inventors: Anthony Richard Gerardi, (52) U.S. Cl. Winston-Salem, NC (US); Barry Smith CPC ................ A61K 8/97 (2013.01); A61O 19/007 Fagg, Winston-Salem, NC (US); (2013.01); A61O 9/02 (2013.01); A61O 5/02 Thaddeus Jude Jackson, High Point, (2013.01); A61O 5/12 (2013.01); A61O5/06 NC (US) (2013.01); A61O5/04 (2013.01); A61O5/065 (2013.01); A61O 5/08 (2013.01); A61O 1/02 (21) Appl. No.: 13/908,684 (2013.01); A61O 700 (2013.01); A61O 1704 1-1. (2013.01); A61O 19/02 (2013.01); A61O 19/04 (22) Filed: Jun. 3, 2013 (2013.01); A61O5/006 (2013.01); A61O 19/08 Publication Classification (2013.01); A61O 19/10 (2013.01); tige (51) Int. Cl. USPC 424/43; 424/751; 424/73; 42.93. A 6LX8/97 (2006.01) s A61O 9/02 (2006.01) A61O 5/02 (2006.01) (57) ABSTRACT A61O5/12 (2006.01) Cosmetic compositions are provided that include an extract A61O5/06 (2006.01) from a seed of the Nicotiana species, one or more cosmeti A61O5/04 (2006.01) cally acceptable carriers to act as a diluent, dispersant or A61O5/08 (2006.01) carrier for the composition, and optionally one or more cos A61O I/02 (2006.01) metic adjuvants.
    [Show full text]
  • Quality Traits of “Cannabidiol Oils”: Cannabinoids Content, Terpene Fingerprint and Oxidation Stability of European Commercially Available Preparations
    molecules Article Quality Traits of “Cannabidiol Oils”: Cannabinoids Content, Terpene Fingerprint and Oxidation Stability of European Commercially Available Preparations Radmila Pavlovic 1,2, Giorgio Nenna 3, Lorenzo Calvi 2, Sara Panseri 4,*, Gigliola Borgonovo 5, Luca Giupponi 1,2 ID , Giuseppe Cannazza 6 ID and Annamaria Giorgi 1,2 1 CRC-Ge.S.Di.Mont.—Centre for Applied Studies in the Sustainable Management and Protection of the Mountain Environment, CRC-Ge.S.Di.Mont.—Università degli Studi di Milano, Via Morino 8, Edolo, 25048 Brescia, Italy; [email protected] (R.P.); [email protected] (L.P.); [email protected] (A.G.) 2 Department of Agricultural and Environmental Sciences—Production, Landscape, Agroenergy, Università degli Studi di Milano, Via Celoria 2, 20133 Milan, Italy; [email protected] 3 UPFARM-UTIFAR—The Professional Union of Pharmacists for Orphan Medicines; Piazza Duca d'Aosta, 14, 20124 Milan, Italy; [email protected] 4 Department of Health, Animal Science and Food Safety, Università degli Studi di Milano, Via Celoria 10, 20133 Milan, Italy 5 Dipartimento di Scienze per gli Alimenti, la Nutrizione e l’Ambiente, Università degli Studi di Milano, Via Celoria 2, 20133 Milan, Italy; [email protected] 6 Dipartimento di Scienze della Vita, Università di Modena e Reggio Emilia, Via Campi 103, 41121 Modena, Italy; [email protected] * Correspondence: [email protected]; Tel.: +39-02-5031-7931 Received: 21 April 2018; Accepted: 15 May 2018; Published: 20 May 2018 Abstract: Cannabidiol (CBD)-based oil preparations are becoming extremely popular, as CBD has been shown to have beneficial effects on human health.
    [Show full text]
  • Soil Association Organic Trading Schedule
    Page 1 of 23 Ref: SA00938RSTS21-02548290421 Soil Association Certification Trading Schedule Company Name: The Organic Herb Trading Company Address: Butts Way Milverton South West TA4 1ND GB Licence No: P938 The business above has been inspected and satisfies the requirements of the Soil Association organic standards and Regulations (EC) No 834/2007 and 889/2008. This document lists the enterprises and products that have been licensed by Soil Association Certification Limited and is valid until the date stated, unless surrendered by the business or suspended or revoked by Soil Association Certification Limited. Valid until 30/04/2022 This document may be used to market the following licensed products only: Soil Association Certification Limited, Spear House, 51 Victoria Street, Bristol BS1 6AD T +44 (0) 117 914 2412 F +44 (0) 117 314 5046 [email protected] Page 2 of 23 Ref: SA00938RSTS21-02548290421 Enterprises Status Blending Organic Contract manufacture Organic Importing Organic Importing from EU countries Organic Packing/repacking Organic Processing/manufacturing Organic Processing/manufacturing Organic Trade Organic Wholesale Organic Product Name Status Acacia Organic Acai Berry Powder Organic Acerola Extract Organic Active Birth Mix Organic Active Blend (NN) Organic Adaptogen Blend (SV) Organic Aduki Beans Organic Agnus Castus Organic Agrimony Organic Agrimony Organic Ajwain Organic Alder Buckthorn Organic Alfalfa (Powder& Seed) Organic Alfalfa Leaf Organic Allspice Organic Allspice Berry Powder Organic Almond Oil - (liquid
    [Show full text]
  • Healing Wounds and Scars, Emotionally and Physically, with Essential Oil Energetics
    Healing Wounds and Scars, Emotionally and Physically, with Essential Oil Energetics BY KELLY HOLLAND AZZARO, RA, CCAP, CBFP, LMT COPYRIGHT: ASHI AROMATICS, INC. Energetics of a Scar •What comes to mind for you when you glance upon a scar on your body or notice one on a stranger or your animal friend? •Do you automatically think of just the physical appearance of a scar, or does the scar flood your mind with memories of trauma associated with it? •Do you feel a sense of connectedness to the wound or scar? If so, this presentation will share that, for some individuals (including our animal friends), scars may also manifest blockages (emotional and physical); and how the energetics of essential oils and botanical bases can be beneficial in the healing process. COPYRIGHT: ASHI AROMATICS, INC. Scars-emotional and physical. The word ‘scar’ may resonate differently depending on the individual. Below are a few descriptions defining the word scar from online dictionary sources [1]. Physical Scar: “A mark left on the skin or within body tissue where a wound, burn, or sore has not healed completely, and fibrous connective tissue has developed." •Associated words: blemish, discoloration, disfigurement, pockmark, lesion, and birthmark. Emotional Scar: “A lasting effect of grief, fear, or other emotion left on a person's character by a traumatic experience.” “Deep psychological scars." •Associated words: damage, injury, trauma. Definition of a Plant’s Scar: “A mark left at the point of separation of a leaf, frond, or other part from a plant.” "A former attachment." •Associated words: damage, impact, injury, trauma.
    [Show full text]
  • Design and Fabrication of a Motorized Oil Palm Fruit Rotary Digester Machine
    American Journal of Engineering Research (AJER) 2019 American Journal of Engineering Research (AJER) e-ISSN: 2320-0847 p-ISSN : 2320-0936 Volume-8, Issue-12, pp-195-205 www.ajer.org Research Paper Open Access Design and Fabrication of a Motorized Oil Palm Fruit Rotary Digester Machine I.S. Oghenevwaire1, D.U., Owuamanam2, I.S., Anisha3 1Department of Mechanical Engineering, Federal University of Petroleum Resources, Effurun, Nigeria 2Department of Production Engineering, University of Benin, Benin City, Nigeria 3Department of Welding Engineering and Offshore Technology, Petroleum Training Institute, Effurun, Nigeria Corresponding author; Oghenevwaire Iyabo Seyefa; [email protected] ABSTRACT :Palm oil is the world’s largest source of edible oil, accounting for 38.5 million tones or 25% of the global edible oil and fat production. Palm oil has been an important ingredient in the diet of many Nigerians.It is estimated that for every Nigerian household of five, about two liters of palm oil are consumed weekly for cooking. Despite the high consumption of the product by average Nigerians, existing technology of processing the product locally are associated with problems such as; unhygienic production processes, high rate of human energy consumption, time-consuming and drudgery etc., thus this research work. The vertical digester machine designed consists of a cylindrical vessel (drum) that is fitted to a central rotating shaft carrying a number of beater arms, feed hopper which serves as the intake chute for the parboiled palm fruit, digester barrel, bearings, main shaft, beater arms, discharge end, electric motor, frame, etc. It works on the rotary impact principle. The digester barrel carries the hopper and the shaft assembly which lies in the central position of the barrel.
    [Show full text]