sign in sign up
<<
Home , 1380s, Wuqiao County

Federal Register / Vol. 76, No. 56 / Wednesday, March 23, 2011 / Notices 16379

Members of the public are entitled to Site 6—at 4502 East State Road 66, Public comment is invited from submit written comments; the Cannelton (Perry County), Indiana; and, interested parties. Submissions (original comments must be received in the Site 7—at 1700 West Willow Creek and 3 copies) shall be addressed to the regional office by April 31, 2011. The Road, Paoli (Orange County), Indiana Board’s Executive Secretary at the address is Rocky Mountain Regional (Orange County to be included within address below. The closing period for Office, 999—18th Street, Suite 1380S, expanded ASF service area, as proposed receipt of comments is 23, 2011. Denver, CO 80202. Comments may be e- — Doc. 3–2011, 76 FR 1133, 1–7–2011). Rebuttal comments in response to mailed to [email protected]. Records The facilities are used to produce material submitted during the foregoing generated by this meeting may be upholstered furniture (up to 1.5 million period may be submitted during the inspected and reproduced at the Rocky sofas, sectionals, loveseats, chairs, and subsequent 15-day period to 6, Mountain Regional Office, as they recliners annually) and cut-and-sewn 2011. become available, both before and after upholstery covers for the U.S. market A copy of the application will be the meeting. Persons interested in the and export. The application proposes available for public inspection at the work of this advisory committee are that Best Home utilize foreign-origin Office of the Executive Secretary, advised to go to the Commission’s Web ‘‘micro-denier suede’’ fabric to be cut Foreign-Trade Zones Board, Room 2111, site, http://www.usccr.gov, or to contact and sewn into furniture upholstery U.S. Department of Commerce, 1401 the Rocky Mountain Regional Office at covers under FTZ procedures. The Constitution Avenue, NW., Washington, the above e-mail or street address. finished upholstery covers (HTSUS DC 20230–0002, and in the ‘‘Reading Deaf or hearing-impaired persons who 9401.90; duty free) would then be Room’’ section of the Board’s Web site, will attend the meeting and require the assembled into finished sofas, which is accessible via http:// services of a sign language interpreter sectionals, loveseats, chairs, and www.trade.gov/ftz. should contact the Regional Office at recliners manufactured by Best Home at For further information, contact Pierre least ten (10) working days before the its Indiana facilities. V. Duy at [email protected] or (202) scheduled date of the meeting. The proposed scope of authority 482–1378. The meeting will be conducted under FTZ procedures would only pursuant to the provisions of the rules involve duty savings on foreign-origin, Dated: March 17, 2011. and regulations of the Commission and micro-denier suede fabrics (classified Pierre V. Duy, FACA. under HTSUS Headings 5407, 5512, Acting Executive Secretary. Dated in Washington, DC, March 17, 2011. 5515, 5516, 5903, 5906, 6001, 6005, [FR Doc. 2011–6882 Filed 3–22–11; 8:45 am] Peter Minarik, 6006; duty rate range: 2.7–17.2%) BILLING CODE P Acting Chief, Regional Programs finished with a caustic soda wash Coordination Unit. process, which the applicant indicates DEPARTMENT OF COMMERCE [FR Doc. 2011–6818 Filed 3–22–11; 8:45 am] are not produced by U.S. mills. The application indicates that Best Home BILLING CODE 6335–01–P does not seek FTZ benefits on any of the International Trade Administration other foreign fabrics the company uses in production at the facilities (i.e., full [A–570–909] DEPARTMENT OF COMMERCE duties would be paid on all such Certain Steel Nails From the People’s Foreign-Trade Zones Board fabrics). All other material inputs used in the proposed manufacturing activity Republic of China: Final Results of the [Docket 22–2011] would be domestic status. First Antidumping Duty Administrative FTZ procedures would exempt Best Review Foreign-Trade Zone 177—Evansville, Home from customs duty payments on IN; Application for Manufacturing AGENCY: Import Administration, the foreign micro-denier suede fabric Authority, Best Chair, Inc. d/b/a Best International Trade Administration, used in export production. On micro- Home Furnishings, (Upholstered Department of Commerce. denier suede fabric used in production Furniture), Ferdinand, Cannelton, and for the U.S. market, the company could SUMMARY: On 15, 2010, the Paoli, IN elect the finished upholstery cover (i.e., Department of Commerce A request has been submitted to the furniture part) duty rate (free) after the (‘‘Department’’) published the Foreign-Trade Zones Board (the Board) fabric has been cut, sewn, and formed Preliminary Results of the first by the Ports of Indiana, grantee of FTZ into upholstery covers, at which time administrative review of the 177, requesting manufacturing authority they are entered for consumption from antidumping duty order on certain steel on behalf of Best Chair, Inc. d/b/a Best the zone. Best Home would also have nails (‘‘steel nails’’) from the People’s 1 Home Furnishings (Best Home), to the option to elect the finished furniture Republic of China (‘‘PRC’’). We gave manufacture upholstered furniture and duty rate (free) for the subject fabric interested parties an opportunity to related parts under FTZ procedures when the finished furniture is entered comment on the Preliminary Results. within FTZ 177. The application was for domestic consumption. The Based upon our analysis of the submitted pursuant to the provisions of application indicates that the savings comments and information received, we the Foreign-Trade Zones Act, as from FTZ procedures would help made changes to the margin calculations amended (19 U.S.C. 81a–81u), and the improve the facilities’ international for the final results of this review. The regulations of the Board (15 CFR part competitiveness. final weighted-average margins are 400). It was formally filed on March 17, In accordance with the Board’s listed below in the ‘‘Final Results of the 2011. regulations, Pierre V. Duy of the FTZ Review’’ section of this notice. The The Best Home facilities (815 Staff is designated examiner to evaluate employees) will be located within the and analyze the facts and information 1 See Certain Steel Nails From the People’s Republic of China: Notice of Preliminary Results FTZ 177 service area at three planned presented in the application and case and Preliminary Rescission, in Part, of the sites: Site 5—at 1 Best Drive in record and to report findings and Antidumping Duty Administrative Review, 75 FR Ferdinand (Dubois County), Indiana; recommendations to the Board. 56070 (September 15, 2010) (‘‘Preliminary Results’’).

VerDate Mar<15>2010 16:46 Mar 22, 2011 Jkt 223001 PO 00000 Frm 00004 Fmt 4703 Sfmt 4703 E:\FR\FM\23MRN1.SGM 23MRN1 jlentini on DSKJ8SOYB1PROD with NOTICES 16380 Federal Register / Vol. 76, No. 56 / Wednesday, March 23, 2011 / Notices

period of review (‘‘POR’’) is 23, Petitioner,5 one individually-reviewed made no shipments of subject 2008, through 31, 2009. respondent, Stanley, and other merchandise during the POR.8 For the 6 DATES: Effective Date: March 23, 2011. interested parties in this final results, we continue to find that administrative review. these companies did not make FOR FURTHER INFORMATION CONTACT: shipments during the POR. Thus, in Emeka Chukwudebe or Matthew Analysis of Comments Received Renkey, AD/CVD Operations, Office 9, accordance with 19 CFR 351.213(d)(3), All issues raised in the case and and consistent with our practice,9 we Import Administration, International rebuttal briefs by parties are addressed are rescinding this review with respect Trade Administration, Department of in the ‘‘Certain Steel Nails from the to these companies. Commerce, 14th Street and Constitution People’s Republic of China: Issues and Avenue, NW., Washington, DC 20230; Decision Memorandum for the Final Changes Since the Preliminary Results telephone: (202) 482–0219 or (202) 482– Results of the First Antidumping Duty Based on a review of the record, 2312, respectively. Administrative Review,’’ dated verification, as well as comments Case History concurrently with this notice (‘‘I&D received from parties regarding our Memo’’), which is hereby adopted by Preliminary Results, we have made On September 15, 2010, the this notice. A list of the issues which certain changes to the margin Department published the Preliminary parties raised, and to which we calculations. Specifically, we have Results of this administrative review. responded in the I&D Memo, is attached updated the calculation for labor and On 7, 2010, we sent a to this notice as an Appendix. The I&D several surrogate values used in the supplemental questionnaire to separate- Memo is a public document and is on Preliminary Results.10 We also revised rate respondent Yitian Nanjing file in the Central Records Unit (‘‘CRU’’), our labor wage rate methodology. See Hardware Co., Ltd. (‘‘Yitian Nanjing’’). Main Commerce Building, Room 7046, the ‘‘Wage Rate Methodology’’ section On October 12, 2010, one of the and is accessible on the Department’s below. For all changes to the individually-reviewed respondents who Web site at http://www.trade.gov/ia. The calculations, see the I&D Memo and had received a calculated rate at the paper copy and electronic version of the company-specific analysis memoranda. Preliminary Results, memorandum are identical in content. For changes to the surrogate values, see Minmetal Co., Ltd. (‘‘Shandong ‘‘Memorandum to the File, through Alex Minmetal’’), informed the Department Final Partial Rescission of Villanueva, Program Manager, AC/CVD that it would not participate in Administrative Review Operations, Office 9, from Emeka verification and withdrew from the In the Preliminary Results, the Chukwudebe, case analyst, AD/CVD administrative review. On October 20, Department announced its intent to Operations, Office 9, First Antidumping 2010, we confirmed with counsel for rescind the review with respect to Duty Administrative Review of Certain Yitian Nanjing that a response to the certain companies 7 that certified they Steel Nails from the People’s Republic Department’s supplemental of China: Surrogate Values for the Final questionnaire was not filed by the 5 Mid Continent Nail Corporation. Results,’’ dated concurrently with this stipulated deadline. On October 21, 6 The following companies filed combined case notice. 2010, following the decision in briefs: Itochu Building Products Co., Inc.; Chiieh 2 Yung Metal Ind. Corp. (‘‘Chiieh Yung’’); Certified Scope of the Order Dorbest, the Department placed wage Products International Inc. (‘‘CPI’’); Jinhai 3 rate data on the record for comment. Hardware Products Co., Ltd.; Jinghai County The merchandise covered by the order The Department conducted verification Hongli Industry & Business Co., Ltd.; Tianjin Jinchi; includes certain steel nails having a of: (1) Tianjin Jinchi Metal Products Co., Shandong Dinglong Import & Export Co., Ltd.; shaft length up to 12 inches. Certain ‘‘ ’’ Tianjin Zhonglian Metals Ware Co., Ltd.; steel nails include, but are not limited Ltd. ( Tianjin Jinchi ) on November 12, Daruixing Nail Products Co., Ltd.; 4 2010; (2) Stanley’s PRC offices and Mingyao Hardware & Mesh Products Huanghua to, nails made of round wire and nails factory from November 15, 2010, Xionghua Hardware Products Co., Ltd; Wintime through November 17, 2010; (3) a wire- Import & Export Corporation Limited of Zhongshan; Manufacture Co., Ltd.; Dagang Zhitong Metal drawing subcontractor for Stanley from Shanghai Jade Shuttle Hardware Tools Co., Ltd.; Products Co., Ltd.; Super Star Pneumatic Romp (Tianjin) Hardware Co., Ltd.; China Staple Nails Co., Ltd.; Hong Kong Yu Xi Co., Ltd.; Senco- November 18, 2010, through November Enterprise (Tianjin) Co., Ltd.; Tianjin Jurun Metal Xingya Metal Products (Taicang) Co., Ltd.; Shanghai 19, 2010; and (4) Stanley’s U.S. office Products Co., Ltd. (‘‘Tianjin Jurun’’); Wuhu Shijie Chengkai Hardware Product Co., Ltd.; Shanghai from 14, 2010, through Hardware Co., Ltd. (‘‘Wuhu Shijie’’); Yitian Nanjing; March Import & Export Company Ltd.; Shaoxing December 16, 2010. We invited Shanghai Chengkai Hardware Products Co., Ltd.; Chengye Metal Producting Co., Ltd.; Suzhou Tianjin Port Free Trade Zone Xiangtong Yaotian Metal Products Co., Ltd.; Tianjin Chentai interested parties to comment on the International Industry & Trade Corp.; Tianjin International Trading Co., Ltd.; Tianjin Jurun; Preliminary Results. Between November Longxing (Group) Huanyu IMP. & EXP. Co., Ltd.; Tianjin Longxing (Group) Huanyu Imp. & Exp. Co., 3, 2010, and January 25, 2011, we Dagang Zhitong Metal Products Co., Ltd.; Tianjin Ltd.; Tianjin Port Free Trade Zone Xiangtong Intl. Shenyuan Steel Producting Group Co., Ltd.; Hebei Industry & Trade Corp.; Tianjin Shenyuan Steel received case and rebuttal briefs from Super Star Pneumatic Nails Co., Ltd.; Shaoxing Producting Group Co., Ltd.; Wuhu Shijie; and Wuxi Chengye Metal Producting Group Co., Ltd.; Tianjin Chengye Metal Products Co., Ltd. 2 See Dorbest Ltd. v. United States, 604 F.3d 1363 Chentai International Trading Co., Ltd.; Qidong 8 See Preliminary Results, 75 FR at 56071–56072; (Fed. Cir. 2010) (‘‘Dorbest’’). Liang Chyuan Metal Industry Co., Ltd.; CYM see also Memorandum to James C. Doyle, Office 9 3 See Memorandum to the file through James C. (Nanjing) Ningquan Nail Manufacture Co., Ltd., Director, through Alex Villanueva, Office 9 Program Doyle, Office 9 Director, and Alex Villanueva, a.k.a. CYM (Nanjing) Nail Manufacture Co., Ltd.; Manager, from Matthew Renkey, Senior Case Office 9 Program Manager, from Emeka and Shanghai Yueda Nails Industry Co., Ltd. a.k.a. Analyst and Emeka Chukwudebe, Case Analyst, Chukwudebe, Office 9 Case Analyst, dated October Shanghai Yueda Nails Co., Ltd. (collectively, First Antidumping Duty Administrative Review of 21, 2010, First Administrative Review of the ‘‘Itochu et al.’’); Shanghai Tengyu Hardware Tools Certain Steel Nails From the Peoples’ Republic of Antidumping Duty Order on Certain Steel Nails Co., Ltd. and Shanghai Curvet Hardware Products China (‘‘PRC’’): Partial Rescission of the First from the People’s Republic of China (‘‘PRC’’): Co. Ltd. (collectively, ‘‘Tengyu and Curvet’’); Antidumping Duty Administrative Review, dated Industry-Specific Wage Rate Selection (‘‘Wage Rate Nanjing Yuechang Hardware Co., Ltd. (‘‘Nanjing September 7, 2010. Memo’’). Yuechang’’); and Shandong Oriental Cherry 9 See, e.g., Certain Frozen Fish Fillets From the 4 The Stanley Works () Fastening Hardware Group Co., Ltd., Shandong Oriental Socialist Republic of : Final Results of Systems Co., Ltd. (‘‘Stanley Langfang’’), the Stanley Cherry Hardware Import and Export Co., Ltd., and Antidumping Duty Administrative Review and Works/Stanley Fastening Systems LP (‘‘Stanley Jining Huarong Hardware Products Co., Ltd. Partial Rescission, 73 FR 15479, 15480 (, Works’’), and an unaffiliated wire drawing (collectively, ‘‘Oriental Cherry Group’’). 2008). subcontractor are collectively referred to as 7 Those companies are: Besco Machinery Industry 10 See I&D Memo at Comment 2 and the company- ‘‘Stanley’’ in this administrative review. (Zhejiang) Co., Ltd.; CPI; CYM (Nanjing) Nail specific analysis memoranda.

VerDate Mar<15>2010 16:46 Mar 22, 2011 Jkt 223001 PO 00000 Frm 00005 Fmt 4703 Sfmt 4703 E:\FR\FM\23MRN1.SGM 23MRN1 jlentini on DSKJ8SOYB1PROD with NOTICES Federal Register / Vol. 76, No. 56 / Wednesday, March 23, 2011 / Notices 16381

that are cut. Certain steel nails may be head section, a centered shank, and a to assign all exporters of subject of one piece construction or constructed smooth symmetrical point, suitable for merchandise in an NME country this of two or more pieces. Certain steel nails use in gas-actuated hand tools. single rate unless an exporter can may be produced from any type of steel, While the HTSUS subheadings are demonstrate that it is sufficiently and have a variety of finishes, heads, provided for convenience and customs independent so as to be entitled to a shanks, point types, shaft lengths and purposes, the written description of the separate rate.12 shaft diameters. Finishes include, but scope of this proceeding is dispositive. In the Preliminary Results, we determined that in addition to the are not limited to, coating in vinyl, zinc Non-Market Economy Treatment (galvanized, whether by electroplating mandatory respondents, Stanley and or hot-dipping one or more times), The Department considers the PRC to Shandong Minmetal, the Separate-Rate phosphate cement, and paint. Head be a non-market economy (‘‘NME’’) Applicants also met the criteria for 11 styles include, but are not limited to, country. In accordance with section separate rate status.13 Since the flat, projection, cupped, oval, brad, 771(18)(C)(i) of the Tariff Act of 1930, as publication of the Preliminary Results, headless, double, countersunk, and amended (‘‘Act’’), any determination that Shandong Minmetal withdrew from the sinker. Shank styles include, but are not a foreign country is an NME country review. Therefore, the Department has, limited to, smooth, barbed, screw shall remain in effect until revoked by as adverse facts available (‘‘AFA’’), threaded, ring shank and fluted shank the administering authority. No party treated Shandong Minmetal as part of styles. Screw-threaded nails subject to has challenged the designation of the the PRC-wide entity.14 Moreover, we this proceeding are driven using direct PRC as an NME country in this review. note that the information that force and not by turning the fastener Therefore, the Department continues to Shangdong Minmetal provided to the using a tool that engages with the head. treat the PRC as an NME country for Department to demonstrate the absence Point styles include, but are not limited purposes of these final results. of de facto and de jure control could not to, diamond, blunt, needle, chisel and Surrogate Country be verified due to its failure to cooperate. Consequently we have not no point. Finished nails may be sold in In the Preliminary Results, the bulk, or they may be collated into strips granted Shandong Minmetal a separate Department stated that it selected India 15 or coils using materials such as plastic, rate. as the appropriate surrogate country to The separate rate is determined based paper, or wire. Certain steel nails use in this administrative review for the subject to this proceeding are currently on the estimated weighted-average following reasons: (1) It is a significant antidumping margins established for classified under the Harmonized Tariff producer of comparable merchandise; Schedule of the United States exporters and producers individually (2) it is at a similar level of economic investigated, excluding zero and de (‘‘HTSUS’’) subheadings 7317.00.55, development pursuant to section 7317.00.65 and 7317.00.75. minimis margins or margins based 773(c)(4) of the Act; and (3) the entirely on AFA.16 In this Excluded from the scope of this Department has reliable data from India administrative review, one mandatory proceeding are roofing nails of all that it can use to value the factors of respondent, Stanley, has an estimated lengths and diameter, whether collated production. As no party submitted weighted-average antidumping margin or in bulk, and whether or not additional comments challenging our which is above de minimis and which galvanized. Steel roofing nails are selection of the primary surrogate is not based on total AFA. Therefore, specifically enumerated and identified country, we are continuing to use India because there is only one relevant in ASTM Standard F 1667 (2005 as the surrogate country for the final weighted-average antidumping margin revision) as Type I, Style 20 nails. Also results of this administrative review. for these final results, we have assigned excluded from the scope of this Wage Rate Methodology proceeding are corrugated nails. A 12 See Notice of Final Determination of Sales at corrugated nail is made of a small strip Pursuant to Dorbest, we have Less Than Fair Value: Sparklers From the People’s of corrugated steel with sharp points on calculated a revised hourly wage rate to Republic of China, 56 FR 20588 (May 6, 1991), as use in valuing Stanley’s reported labor. further developed in Notice of Final Determination one side. Also excluded from the scope of Sales at Less Than Fair Value: Silicon Carbide of this proceeding are fasteners suitable The revised wage rate is calculated by From the People’s Republic of China, 59 FR 22585 for use in powder-actuated hand tools, averaging earnings and/or wages in (May 2, 1994). not threaded and threaded, which are countries that are economically 13 Those companies are: (1) Aironware (Shanghai) currently classified under HTSUS comparable to the PRC and that are Co., Ltd.; (2) Chiieh Yung Metal Ind. Corp.; (3) significant producers of comparable China Staple Enterprise (Tianjin) Co., Ltd.; (4) 7317.00.20 and 7317.00.30. Also Dezhou Hualude Hardware Products Co., Ltd.; (5) excluded from the scope of this merchandise, pursuant to section 773 of Faithful Engineering Products Co., Ltd.; (6) proceeding are thumb tacks, which are the Act. See I&D Memo at Comment 2. Hengshui Mingyao Hardware & Mesh Products Co., Ltd.; (7) Huanghua Jinhai Hardware Products Co., currently classified under HTSUS Separate Rates Ltd.; (8) Huanghua Xionghua Hardware Products 7317.00.10.00. Also excluded from the In proceedings involving NME Co., Ltd.; (9) Jisco Corporation (‘‘Jisco’’); (10) Koram scope of this proceeding are certain Panagene Co., Ltd. (‘‘Koram Panagene’’); (11) countries, the Department holds a brads and finish nails that are equal to Nanjing Yuechang Hardware Co., Ltd.; (12) Qidong rebuttable presumption that all Liang Chyuan Metal Industry Co., Ltd.; (13) or less than 0.0720 inches in shank companies within the country are Qingdao D & L Group Ltd.; (14) Romp (Tianjin) diameter, round or rectangular in cross subject to government control and, thus, Hardware Co., Ltd.; (15) Shandong Dinglong Import section, between 0.375 inches and & Export Co., Ltd.; (16) Shanghai Jade Shuttle should be assessed a single antidumping 2.5 inches in length, and that are Hardware Tools Co., Ltd.; (17) Shouguang Meiqing duty rate. It is the Department’s policy Nail Industry Co., Ltd.; (18) Tianjin Jinchi Metal collated with adhesive or polyester film Products Co., Ltd.; (19) Tianjin Jinghai County tape backed with a heat seal adhesive. 11 See, e.g., Preliminary Determination of Sales at Hongli Industry & Business Co., Ltd.; (20) Tianjin Also excluded from the scope of this Less Than Fair Value and Postponement of Final Zhonglian Metals Ware Co., Ltd.; (21) Wintime proceeding are fasteners having a case Determination: Coated Free Sheet Paper From the Import & Export Corporation Limited of Zhongshan; hardness greater than or equal to People’s Republic of China, 72 FR 30758, 30760 and (22) Zhejiang Gem-Chun Hardware Accessory (June 4, 2007), unchanged in Final Determination Co., Ltd. (collectively, ‘‘Separate-Rate Applicants’’). 50 HRC, a carbon content greater than of Sales at Less Than Fair Value: Coated Free Sheet 14 See section 735(c)(5)(A) of the Act. or equal to 0.5 percent, a round head, Paper From the People’s Republic of China, 72 FR 15 See I&D Memo at Comment 13. a secondary reduced-diameter raised 60632 (October 25, 2007). 16 See id.

VerDate Mar<15>2010 16:46 Mar 22, 2011 Jkt 223001 PO 00000 Frm 00006 Fmt 4703 Sfmt 4703 E:\FR\FM\23MRN1.SGM 23MRN1 jlentini on DSKJ8SOYB1PROD with NOTICES 16382 Federal Register / Vol. 76, No. 56 / Wednesday, March 23, 2011 / Notices

Stanley’s margin, which is the Department’s Web site at http:// wide entity did not provide the 13.90 percent, to the separate-rate ia.ita.doc.gov/nme/nme-sep-rate.html to Department with requested information, companies.17 demonstrate their continued eligibility pursuant to section 776(a)(2)(A) of the PRC–Wide Entity for separate-rate status. Thus, the Act, we continue to treat such entities Department treated these PRC exporters as part of the PRC-wide entity. In the Preliminary Results, the as part of the PRC-wide entity. The Final Results of the Review Department determined that certain PRC Department also found that the PRC- exporters subject to this review failed to wide entity did not respond to our recertify their separate rates using the The weighted-average dumping requests for information.18 As the PRC- separate rate certification provided at margins for the POR are as follows:

Weighted average Exporter margin (percent)

(1) Stanley ...... 13.90 (2) Aironware (Shanghai) Co., Ltd ...... 13.90 (3) Chiieh Yung Metal Ind. Corp ...... 13.90 (4) China Staple Enterprise (Tianjin) Co., Ltd ...... 13.90 (5) Dezhou Hualude Hardware Products Co., Ltd ...... 13.90 (6) Faithful Engineering Products Co., Ltd ...... 13.90 (7) Hengshui Mingyao Hardware & Mesh Products Co., Ltd ...... 13.90 (8) Huanghua Jinhai Hardware Products Co., Ltd ...... 13.90 (9) Huanghua Xionghua Hardware Products Co., Ltd ...... 13.90 (10) Jisco Corporation ...... 13.90 (11) Koram Panagene Co., Ltd ...... 13.90 (12) Nanjing Yuechang Hardware Co., Ltd ...... 13.90 (13) Qidong Liang Chyuan Metal Industry Co., Ltd ...... 13.90 (14) Qingdao D & L Group Ltd ...... 13.90 (15) Romp (Tianjin) Hardware Co., Ltd ...... 13.90 (16) Shandong Dinglong Import & Export Co., Ltd ...... 13.90 (17) Shanghai Jade Shuttle Hardware Tools Co., Ltd ...... 13.90 (18) Shouguang Meiqing Nail Industry Co., Ltd ...... 13.90 (19) Tianjin Jinchi Metal Products Co., Ltd ...... 13.90 (20) Tianjin Jinghai County Hongli Industry & Business Co., Ltd ...... 13.90 (21) Tianjin Zhonglian Metals Ware Co., Ltd ...... 13.90 (22) Wintime Import & Export Corporation Limited of Zhongshan ...... 13.90 (23) Zhejiang Gem-Chun Hardware Accessory Co., Ltd ...... 13.90 (24) PRC-wide Entity ...... 118.04

The following companies are not Exporter Exporter eligible for a separate rate and will be considered part of the PRC-wide entity: (18) Huanghua Xinda Nail Production Co., (35) Shanghai Curvet Hardware Products Ltd. Co., Ltd. Exporter (19) Huanghua Yufutai Hardware Products (36) Shanghai Nanhui Jinjun Hardware Fac- Co., Ltd. tory. (1) Shandong Minmetal. (20) Jinding Metal Products Ltd. (37) Shanghai Tengyu Hardware Tools Co., (2) Beijing Daruixing Global Trading Co., Ltd. (21) Joto Enterprise Co., Ltd. Ltd. (3) Beijing Tri-Metal Co., Ltd. (22) Kyung Dong Corp. (38) Sinochem Tianjin Imp & Exp Shenzhen (4) Beijing Yonghongsheng Metal Products (23) Maanshan Longer Nail Product Co., Ltd. Corp. Co., Ltd. (24) Nanjing Dayu Pneumatic Gun Nails Co., (39) Tianjin Baisheng Metal Products Co., (5) Cana (Tiajin) Hardware Ind., Co., Ltd. Ltd. Ltd. (40) Tianjin Bosai Hardware Tools Co., Ltd. (6) China Silk Trading & Logistics Co., Ltd. (25) Qingdao Denarius Manufacture Co. Lim- (41) Tianjin City Dagang Area Jinding Metal (7) Chongqing Hybest Nailery Co., Ltd. ited (8) Ruili Nail Production Co. Ltd. Products Factory. (26) Qingdao International Fastening Sys- (9) Dong’e Fuqiang Metal Products Co., Ltd. (42) Tianjin City Daman Port Area Jinding tems Inc. (10) Haixing Hongda Hardware Production Metal Products .Factory (27) Qingdao Sino-Sun International Trading Co., Ltd. (43) Tianjin City Jinchi Metal Products Co., Company Limited (11) Haixing Linhai Hardware Products Fac- Ltd. tory. (28) Qingyuan County Hongyi Hardware (44) Tianjin Dagang Dongfu Metallic Products (12) Handuk Industrial Co., Ltd. Products Factory. Co., Ltd. (13) Hilti (China) Limited. (29) Qingyun Hongyi Hardware Factory. (45) Tianjin Dagang Hewang Nail Factory. (14) Huadu Jin Chuan Manufactory Co., Ltd. (30) Rizhao Changxing Nail-Making Co., Ltd. (46) Tianjin Dagang Hewang Nails Manufac- (15) Huanghua Huarong Hardware Products (31) Rizhao Handuk Fasteners Co., Ltd. ture Plant. Co., Ltd. (32) Rizhao Qingdong Electric Appliance Co., (47) Tianjin Dagang Huasheng Nailery Co., (16) Huanghua Jinhai Metal Products Co., Ltd. Ltd. Ltd. (33) Shandong Minimetals Co., Ltd. (48) Tianjin Dagang Jingang Nail Factory. (17) Huanghua Shenghua Hardware Manu- (34) Shandong Oriental Cherry Hardware (49) Tianjin Dagang Jingang Nails Manufac- factory Factory. Group, Ltd. ture Plant.

17 See, e.g., Steel Wire Garment Hangers From the Sales at Less Than Fair Value, 73 FR 47587, 47591 18 See I&D Memo at Comment 13. People’s Republic of China: Final Determination of ( 14, 2008).

VerDate Mar<15>2010 16:46 Mar 22, 2011 Jkt 223001 PO 00000 Frm 00007 Fmt 4703 Sfmt 4703 E:\FR\FM\23MRN1.SGM 23MRN1 jlentini on DSKJ8SOYB1PROD with NOTICES Federal Register / Vol. 76, No. 56 / Wednesday, March 23, 2011 / Notices 16383

Exporter Pursuant to 19 CFR 351.212(b)(1), we prior to liquidation of the relevant will calculate importer-specific (or entries during this POR. Failure to (50) Tianjin Dagang Linda Metallic Products customer-specific) ad valorem duty comply with this requirement could Co., Ltd. assessment rates based on the ratio of result in the Department’s presumption (51) Tianjin Dagang Longhua Metal Products the total amount of the dumping that reimbursement of antidumping Plant. margins calculated for the examined duties has occurred and the subsequent (52) Tianjin Dagang Shenda Metal Products Co., Ltd. sales to the total entered value of those assessment of doubled antidumping (53) Tianjin Dagang Yate Nail Co., Ltd. same sales. In accordance with 19 CFR duties. 351.106(c)(2), we will instruct CBP to (54) Tianjin Foreign Trade (Group) Textile & Administrative Protective Orders Garment Co., Ltd. liquidate, without regard to (55) Tianjin Hewang Nail Making Factory. antidumping duties, all entries of This notice also serves as a reminder (56) Tianjin Huapeng Metal Company. subject merchandise during the POR for to parties subject to administrative (57) Tianjin Huachang Metal Products Co., which the importer-specific assessment protective order (‘‘APO’’) of their Ltd. rate is zero or de minimis. For the responsibility concerning the return or (58) Tianjin Huasheng Nails Production Co., companies receiving a separate rate that destruction of proprietary information Ltd. were not selected for individual review, disclosed under APO in accordance (59) Tianjin Jieli Hengyuan Metallic Products Co., Ltd. we will calculate an assessment rate with 19 CFR 351.305, which continues (60) Tianjin Jietong Hardware Products Co., based on the simple average of the cash to govern business proprietary Ltd. deposit rates calculated for the information in this segment of the (61) Tianjin Jietong Metal Products Co., Ltd. companies selected for individual proceeding. Timely written notification (62) Tianjin Jin Gang Metal Products Co., review pursuant to section 735(c)(5)(B) of the return/destruction of APO Ltd. of the Act. materials or conversion to judicial (63) Tianjin Jishili Hardware Co., Ltd. Cash Deposit Requirements protective order is hereby requested. (64) Tianjin JLHY Metal Products Co., Ltd. Failure to comply with the regulations (65) Tianjin Kunxin Hardware Co., Ltd. The following cash deposit (66) Tianjin Kunxin Metal Products Co., Ltd. and terms of an APO is a violation requirements will be effective upon which is subject to sanction. (67) Tianjin Linda Metal Company publication of these final results of (68) Tianjin Qichuan Metal Products Co., Ltd. We are issuing and publishing this (69) Tianjin Ruiji Metal Products Co., Ltd. administrative review for all shipments administrative review and notice in (70) Tianjin Shishun Metal Product Co., Ltd. of the subject merchandise entered, or accordance with sections 751(a)(1) and (71) Tianjin Shishun Metallic Products Co., withdrawn from warehouse, for 777(i) of the Act. Ltd. consumption on or after the publication (72) Tianjin Xiantong Fucheng Gun Nail Man- date, as provided for by section Dated: , 2011. ufacture Co., Ltd. 751(a)(2)(C) of the Act: (1) For the Kim Glas, (73) Tianjin Xinyuansheng Metal Products exporters listed above, the cash deposit Acting Deputy Assistant Secretary for Import Co., Ltd. rate will be established in the final Administration. (74) Tianjin Yihao Metallic Products Co., Ltd. results of this review (except, if the rate (75) Tianjin Yongchang Metal Product Co., Appendix I—Issues & Decision Ltd. is zero or de minimis, i.e., less than 0.5 Memorandum percent, no cash deposit will be (76) Tianjin Yongxu Metal Products Co., Ltd. General Issues (77) Tianjin Yongyi Standard Parts Produc- required for that company); (2) for tion Co., Ltd. previously investigated or reviewed PRC Comment 1: Cash Deposit and Liquidation (78) Unicatch Industrial Co., Ltd. and non-PRC exporters not listed above Instructions (79) Wuqiao County Huifeng Hardware Prod- that have separate rates, the cash Comment 2: Labor Rate Methodology ucts Factory. deposit rate will continue to be the Comment 3: Surrogate Financial Ratios Comment 4: Steel Wire Rod Surrogate Value (80) Wuqiao County Xinchuang Hardware exporter-specific rate published for the Products Factory. Comment 5: Electricity Surrogate Value most recent period; (3) for all PRC Comment 6: Other Surrogate Values (81) Wuqiao Huifeng Hardware Production exporters of subject merchandise which Co., Ltd. A. Copper Coated Steel Welding Wire (82) Wuxi Baolin Nail-Making Machinery Co., have not been found to be entitled to a B. Coatings Ltd. separate rate, the cash deposit rate will C. Glass Balls (83) Wuxi Qiangye Metalwork Production be the PRC-wide rate of 118.04 percent; D. Sodium Hydroxide Co., Ltd. and (4) for all non-PRC exporters of E. Sodium Sulfate (84) Zhangjiagang Longxiang Packing Mate- subject merchandise which have not F. Plastic Cores rials Co., Ltd. received their own rate, the cash deposit G. Labels (85) Zhongshan Junlong Nail Manufactures rate will be the rate applicable to the H. Shrink Film Co., Ltd. I. Borax PRC exporters that supplied that non- J. Cardboard Trays PRC exporter. These deposit Comment 7: Zeroing Assessment Rates requirements, when imposed, shall Upon issuance of the final results, the remain in effect until further notice. Company-Specific Issues Department will determine, and U.S. Reimbursement of Duties Separate Rate Respondents Customs and Border Protection (‘‘CBP’’) This notice also serves as a final Comment 8: Rate for Separate Rate shall assess, antidumping duties on all Respondents appropriate entries. The Department reminder to importers of their CPI intends to issue assessment instructions responsibility under 19 CFR 351.402(f) to CBP 15 days after the date of to file a certificate regarding the Comment 9: Entries Incorrectly Attributed to publication of the final results of reimbursement of antidumping duties CPI review, excluding any reported sales Tengyu and Curvet 19 measures period during the original investigation, that entered during the gap period. to the day prior to the U.S. International Trade Comment 10: Rate for Final Results Commission’s final determination. In the instant Rizhao and Wuxi Qiangye 19 The gap period represents the period of time case, the gap period is , 2008, to July 24, after the expiration of the 180-day provisional 2008. Comment 11: Rate for Final Results

VerDate Mar<15>2010 16:46 Mar 22, 2011 Jkt 223001 PO 00000 Frm 00008 Fmt 4703 Sfmt 4703 E:\FR\FM\23MRN1.SGM 23MRN1 jlentini on DSKJ8SOYB1PROD with NOTICES 16384 Federal Register / Vol. 76, No. 56 / Wednesday, March 23, 2011 / Notices

Chiieh Yung, Jisco, and Koram Panagene currently due no later than March 19, DEPARTMENT OF COMMERCE Comment 12: Withdrawal of Review Request 2011. International Trade Administration Shandong Minmetal Statutory Time Limits Comment 13: Application of Total Adverse [A–552–802] Facts Available (‘‘AFA’’) Section 751(a)(2)(B)(iv) of the Tariff Act of 1930, as amended (the ‘‘Act’’), and Certain Frozen Warmwater Shrimp Yitian Nanjing 19 CFR 351.214(i)(1) require the From the Socialist Republic of Comment 14: PRC-wide Rate Department to issue the preliminary Vietnam: Initiation of Antidumping Duty New Shipper Review Tianjin Shenyuan and Shaoxing Chengye results of a new shipper review within Comment 15: Correction of Company Names 180 days after the date on which the AGENCY: Import Administration, new shipper review was initiated and International Trade Administration, Oriental Cherry Group final results within 90 days after the Department of Commerce. Comment 16: Rate for Final Results date on which the preliminary results DATES: Effective Date: March 23, 2011. Stanley are issued. However, the Department SUMMARY: The Department of Commerce Comment 17: Application of Total or Partial may extend the deadline for completion (the ‘‘Department’’) has determined that AFA of the preliminary results of a new a request for a new shipper review Comment 18: Intermediate Input shipper review to 300 days if it (‘‘NSR’’) of the antidumping duty order Methodology determines that the case is on certain frozen warmwater shrimp Comment 19: Indirect Selling Expenses extraordinarily complicated. See 19 CFR (‘‘shrimp’’) from the Socialist Republic [FR Doc. 2011–6728 Filed 3–22–11; 8:45 am] 351.214(i)(2). of Vietnam (‘‘Vietnam’’), received on BILLING CODE 3510–DS–P 28, 2011, meets the statutory Extension of Time Limit for Preliminary and regulatory requirements for Results of Review initiation. The period of review (‘‘POR’’) DEPARTMENT OF COMMERCE The Department has determined that for this NSR is February 1, 2010– January 31, 2011. International Trade Administration the review is extraordinarily complicated as the Department must FOR FURTHER INFORMATION CONTACT: Paul [A–552–802] issue, and analyze the responses to, Walker, AD/CVD Operations, Office 9, additional supplemental questionnaires Import Administration, International Certain Frozen Warmwater Shrimp Trade Administration, U.S. Department From the Socialist Republic of concerning Quoc Viet’s sales practices and its shrimp factors of production of Commerce, 14th Street and Vietnam: Extension of Preliminary Constitution Avenue, NW., Washington, usage ratio. Moreover, the Department Results of Antidumping Duty New DC 20230; telephone: 202–482–0413. Shipper Review needs additional time to analyze the bona fide nature of Quoc Viet’s sale, SUPPLEMENTARY INFORMATION: AGENCY: Import Administration, which includes gathering data from U.S. Background International Trade Administration, Customs and Border Protection. Based Department of Commerce. The notice announcing the SUMMARY: The Department of Commerce on the timing of the case and the antidumping duty order on shrimp from (‘‘Department’’) is extending the time additional information that must be Vietnam was published in the Federal limit for the preliminary results of the gathered, the preliminary results of this Register on February 1, 2005.1 On new shipper review of certain frozen new shipper review cannot be February 28, 2011, pursuant to section warmwater shrimp (‘‘shrimp’’) from the completed within 180 days. 751(a)(2)(B)(i) of the Tariff Act of 1930, Socialist Republic of Vietnam Therefore, the Department is as amended (the ‘‘Act’’), and section (‘‘Vietnam’’). The period of review for extending the time limit for completion 351.214(c) of the Department’s this review is February 1, 2010, through of the preliminary results of this new regulations, the Department received a July 31, 2010. shipper review by 26 days from the NSR request from Thong Thuan Seafood DATES: Effective Date: March 23, 2011. original March 19, 2011, deadline. The Co., Ltd. (‘‘Thong Thuan’’). Thong Thuan FOR FURTHER INFORMATION CONTACT: Paul preliminary results will now be due no certified that it is a producer and Walker, AD/CVD Operations, Office 9, later than April 14, 2011. The final exporter of the subject merchandise Import Administration, International results continue to be due 90 days after upon which the request was based. Pursuant to section 751(a)(2)(B)(i)(I) of Trade Administration, U.S. Department the issuance of the preliminary results. of Commerce, 14th Street and the Act and section 351.214(b)(2)(i) of We are issuing and publishing this Constitution Avenue, NW., Washington, the Department’s regulations, Thong DC 20230; telephone: (202) 482–0413. notice in accordance with sections Thuan certified that it did not export 751(a)(2)(B)(iv) and 777(i) of the Act. subject merchandise to the United Background Dated: March 16, 2011. States during the period of investigation (‘‘POI’’). In addition, pursuant to section On October 1, 2010, the Department Christian Marsh, published a notice of initiation of the 751(a)(2)(B)(i)(II) of the Act and section Deputy Assistant Secretary for Antidumping new shipper review in the antidumping 351.214(b)(2)(iii)(A) of the Department’s and Countervailing Duty Operations. duty order on shrimp from Vietnam for regulations, Thong Thuan certified that, Quoc Viet Seaproducts Processing [FR Doc. 2011–6883 Filed 3–22–11; 8:45 am] since the initiation of the investigation, Trading and Import-Export Co., Ltd. BILLING CODE 3510–DS–P it has never been affiliated with any (‘‘Quoc Viet’’). See Certain Frozen Vietnamese exporter or producer who Warmwater Shrimp from the Socialist Republic of Vietnam: Initiation of 1 See Notice of Amended Final Determination of Sales at Less Than Fair Value and Antidumping Antidumping Duty New Shipper Review, Duty Order: Certain Frozen Warmwater Shrimp 75 FR 60730 (October 1, 2010). The From the Socialist Republic of Vietnam, 70 FR 5152 preliminary results of this review are (February 1, 2005) (‘‘Order’’).

VerDate Mar<15>2010 16:46 Mar 22, 2011 Jkt 223001 PO 00000 Frm 00009 Fmt 4703 Sfmt 4703 E:\FR\FM\23MRN1.SGM 23MRN1 jlentini on DSKJ8SOYB1PROD with NOTICES