To insert your company logo on this slide

• From the Insert Menu ® • Select “Picture” Carderock Stone • Locate your logo file ® • Click OK Tri-State Stone & Building Supply, Inc. To resize the logo

® Add quarriers of Carderock Stone • Click anywhere inside the Corporate www.carderock.com logo. The boxes that appear Logo outside the logo are known as “resize handles.” Here 8200 Seven Locks Road • Use these to resize the Bethesda, MD 20817 object. 301-365-2100 • If you hold down the shift key before using the resize 301-365-5524 (fax) handles, you will maintain [email protected] the proportions of the object you wish to resize.

Carderock ® Drywall Stone

• Ideal for dry and semi-dry stack retaining walls • Approximately 3000 lbs. per pallet • Gives rustic appearance Carderock ® Gardenwall Stone

• Easy to stack, even for the do-it- yourself customer • Quick and easy for contractors • Approximately 3000 lbs. per pallet Carderock® Veneer Stone • 4” - 6” veneer • Ideal for houses, fireplaces, or any application that requires a stone veneer • Vertical, horizontal, & transverse seams for workability • Beautiful color range • Adaptable to numerous installation styles and looks

Carderock® Premium Snapped Veneer Stone • 4” - 6” snapped veneer • Ideal for roughly squared or ashlar application • Minimal trimming or shaping required • Beautiful color range • 40 -45 square feet per ton

Carderock® Sawn Ashlar Veneer Stone • 4” - 6” bed depth, sawn top & bottom • Split and seam faces • Sawn ends • Stock 3.5”, 7.5”, 11.5” rises. Custom rises available • 40 -45 square feet per ton

Carderock® Sawn Ashlar Veneer Installation Carderock® Thin Veneer Stone • Thin veneer - 1-1/2 - 2” thick ~ no footing required! • Real stone - not artificial • Ideal for any application that requires a thin veneer stone.

Carderock® Thin Veneer Installation Carderocks TM

• Tumbled Carderock® Stone - same unique color range • Applications include dry stream beds, water features, groundcover Carderock® Chips Landscape groundcover Carderock® Flagging Carderock® Select Boulders

Broad, flat boulders ideal for steppers, water features or specimens Carderock® Boulders

Available in a full range of sizes and shapes for all your design specifications Carderock® Veneer application

Howard Hughes Medical Center - the stone was hand tooled on site Carderock® Veneer application

Typical housefront - random style

Carderock® Veneer application

Typical housefront – random ashlar

Carderock® Veneer application

Landscape walls/entrance feature Country club community Carderock® Veneer application

Carderock® Veneer application

Country Club Addition / Restoration Carderock® Gardenwall application Carderock® Veneer application

Sawed ashlar installation Patio/sitting wall application

Pennsylvania flagstone patio with Carderock® sitting wall The Carderock® Advantage

• Beautiful color range • Durable yet easy to work • No freeze / thaw problems • Over 85 years experience - family owned and operated • Year round production - no seasonal shutdowns • Unsurpassed quality control • Nationwide dealer network • Design assistance always available Typical Design Drawings Installing Carderock® Thin Veneer

• Carderock Thin Veneer may be applied over any masonry surface, concrete block, brick, cement, etc. Painted surfaces must be sandblasted, or otherwise stripped of paint. If it is difficult to remove paint or if surface is of frame construction, nail metal lath to wall securely, 6" on center. (For exterior, vapor barrier first, then metal lath) Apply scratch coat (2 parts sand to 1 part cement) to lath. Make certain lath is covered completely with a thin coat (1/2"-3/4" thick). Use a metal scraper or small scrap of lath to lightly rake horizontal grooves in the scratch coat. Allow scratch coat to set up or cure. This is now a masonry surface to which the Thin Veneer may be applied using the following steps: • Mix rich mortar (2 parts sand to I part cement) to a creamy consistency similar to whipped potatoes. • Determine if stones will be laid out on ground to the desired fit prior to installation, or if trimming is required to complete finished application. • Make certain surface is free of dirt, sand, or loose particles. If surface is dry, dampen first with a masonry brush but do not saturate. This prevents the wall from pulling the moisture from the mortar, allowing it to set up both naturally and with a better bond. For cleaner installation, begin applying stone at the top of the wall and work toward the bottom. • Trowel rich mortar onto wall approximately 1/2" thick. • Take clean stone and slightly dampen the back side. This frees any dust and again prevents moisture loss from mortar. • Apply thin coat of rich mortar onto back side of stone. This fills in pits and rises in stone and creates a stronger bond with the wall. • Press stone into mortar, rotating slightly, forcing some of the mortar to squeeze out freely. Any mortar forced out beyond the finished joint or on the stone surface itself must be removed with trowel, joint tool, or brush before the mortar is allowed to set up. Narrow joints will provide a nicer appearance. • Use a grout bag to fill all joints (or use trowels). As the mortar stiffens, tool to the desired depth and be sure to brush off all excess. Other Natural Stone Products

Tri State Stone and Building Supply, Inc. is a full service stone dealer. In addition to Carderock® Stone, we sell over 50 other types of natural stone, including stacking wallstone, flagstone (both pattern and irregular), veneer, decorative aggregates, and boulders of all sizes and shapes. Our commitment to quality products and unmatched service insures the variety of choice you demand and ready supply for the timely completion of your project. We do not merely broker these other materials, we stock them in our yard for immediate delivery. If you have the need for a natural stone product that we do not have, always ask…. we can usually find it for you. Pennsylvania Fieldstone

• ideal for drystack walls • gray to lilac range • some moss and lichen • beautifully weathered • full range of thickness available in wallstone grade • steppers and boulders also available Pennsylvania Fieldstone Application

Edinburgh Waterfall Lake Chesapeake, Virginia Pennsylvania Fieldstone Application

This project utilized over 700 tons of Pennsylvania fieldstone in various grades – wallstone, steppers & boulders ! Pennsylvania Fieldstone Application

This spectacular water feature is the centerpiece of an upscale community in the Tidewater area of Virginia Pennsylvania Fieldstone Application

The opposite side of the cascade … a 25’ waterfall built with variegated Pennsylvania veneer Pennsylvania Fieldstone Boulders Pennsylvania field stone boulder application

National Gallery of Art - East Building Washington, DC Shenandoah Stone

•Buff to gray color range with dark highlights •Wallstone in three sizes •Building stone •Steppers •Boulders Pennsylvania flagstone

•Pattern sizes as well as irregular shapes •Full color •Select blue •Lilac •Tread stock, sawed 6 sides and thermal treated Arizona flagstone

A fine grained sandstone available in a range of beautiful pastel colors