AGED ASHLAR STONE. ® Thermoform Plastic Formliner

® AGED ASHLAR STONE. ® Thermoform Plastic Formliner

4' 3 3/4" Nominal 4 "

General Information: The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and excellent overall performance. Its reuse factor is 10, subject to pattern configuration, proper handling and jobsite configurations. 10' Care and Handling: To protect from thermal deformation, formliners should not be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F70621 F70649 Uses Uses 1 Up to 10 Material Thickness Material Thickness .090 .110 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

No Photo Available

53 DAYTONSUPERIOR.COM ® AUSTIN ASHLAR STONE ® Thermoform Plastic Formliner

4' 3 14" 3 4 "

General Information: The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and excellent overall performance. Its reuse factor is 10, subject to pattern configuration, proper handling and jobsite configurations. Care and Handling: To protect from thermal deformation, formliners should not 10' be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F70613 F70641 Uses Uses 1 Up to 10 Material Thickness Material Thickness .150 .150 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

54 DAYTONSUPERIOR.COM ® BUFFALO DRY STACK ® Thermoform Plastic Formliner

4' Varies

1“

General Information: The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and excellent overall performance. Its reuse factor is 10, subject to pattern configuration, proper handling and jobsite 10' configurations. Care and Handling: To protect from thermal deformation, formliners should not be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F947056 F940025 Uses Uses 1 Up to 10 Material Thickness Material Thickness .090 .110 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

55 DAYTONSUPERIOR.COM ® CHISELED ASHLAR STONE ® Thermoform Plastic Formliner

4' 3/4" Typical 1 12 "

10' Care and Handling: To protect from thermal deformation, formliners should not be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F70617 F70645 Uses Uses 1 Up to 10 Material Thickness Material Thickness .150 .150 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

No Photo Available

56 DAYTONSUPERIOR.COM ® COLONIAL DRY STACK ® Thermoform Plastic Formliner

4' 3 18"

General Information: The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and excellent overall performance. Its reuse factor is 10, subject to pattern configuration, proper handling and jobsite configurations. Care and Handling: 10' To protect from thermal deformation, formliners should not be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F3170593 F3170510 Uses Uses 1 Up to 10 Material Thickness Material Thickness .150 .150 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

57 DAYTONSUPERIOR.COM ® FRACTURED CONCRETE ® Thermoform Plastic Formliner

4' 1/2"Nominal

General Information: The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and excellent overall performance. Its reuse factor is 10, subject to pattern configuration, proper handling and jobsite configurations. Care and Handling: 10' To protect from thermal deformation, formliners should not be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F3170583 F3170508 Uses Uses 1 Up to 10 Material Thickness Material Thickness .090 .110 Standard Dimensions Standard Dimensions 4' x 10' 4' x 10' Color Color White Gray

58 DAYTONSUPERIOR.COM ® FRACTURED GRANITE ® Thermoform Plastic Formliner

4' ¾"

General Information: The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and excellent overall performance. Its reuse factor is 10, subject to pattern configuration, proper handling and jobsite configurations. Care and Handling: 10' To protect from thermal deformation, formliners should not be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F947053 F940022 Uses Uses 1 Up to 10 Material Thickness Material Thickness .090 .110 Standard Dimensions Standard Dimensions 4' x 10' 4' x 10' Color Color White Gray

59 DAYTONSUPERIOR.COM ® GRANDE FLAGSTONE ® Thermoform Plastic Formliner

4’

General Information: The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and excellent overall performance. Its reuse factor is 10, subject to pattern configuration, proper handling and jobsite configurations. Care and Handling: To protect from thermal deformation, formliners should not be exposed to temperatures above 140°F (60°C). To avoid 10’ discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F70612 F70640 Uses Uses 1 Up to 10 Material Thickness Material Thickness .090 .110 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

No Photo Available

60 DAYTONSUPERIOR.COM ® GRANITE STONE ® Thermoform Plastic Formliner

4' 3/4"

Styrene ABS Product Code # Product Code # F70623 F70651 Uses Uses 1 Up to 10 Material Thickness Material Thickness .090 .110 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

No Photo Available

61 DAYTONSUPERIOR.COM ® HILL COUNTRY FLAGSTONE ® Thermoform Plastic Formliner

4' Va ries

2" max.

Styrene ABS Product Code # Product Code # F3170594 F3170511 Uses Uses 1 Up to 10 Material Thickness Material Thickness .150 .150 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

62 DAYTONSUPERIOR.COM ® LARGE DRY STACK STONE ® Thermoform Plastic Formliner

4' 1 14"

General Information: The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and excellent overall performance. Its reuse factor is 10, subject to pattern configuration, proper handling and jobsite configurations. Care and Handling: 10' To protect from thermal deformation, formliners should not be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F3170582 F3170507 Uses Uses 1 Up to 10 Material Thickness Material Thickness .150 .150 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

63 DAYTONSUPERIOR.COM ® MISSION ASHLAR STONE ® Thermoform Plastic Formliner

No Profile Drawing Available

General Information: The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and excellent overall performance. Its reuse factor is 10, subject to pattern configuration, proper handling and jobsite configurations. No Formliner Care and Handling: To protect from thermal deformation, formliners should not Face Drawing Available be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F70615 F70643 Uses Uses 1 Up to 10 Material Thickness Material Thickness .150 .150 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

No Photo Available

64 DAYTONSUPERIOR.COM ® OKLAHOMA NATIVE STONE ® Thermoform Plastic Formliner

4' Liner to have 1 1/4" - 1/2" Perimeter Mortar Joint approximately a 16 " radius at joints 1/2" - 1" Mortar Joints

1/4" - 1/2"

Styrene ABS Product Code # Product Code # F947037 F940006 Uses Uses 1 Up to 10 Material Thickness Material Thickness .090 .110 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

65 DAYTONSUPERIOR.COM ® OLD ASHLAR STONE ® Thermoform Plastic Formliner

4' Mortar JointVaries 1-1/4"Max.

Styrene ABS Product Code # Product Code # F30429 F30427 Uses Uses 1 Up to 10 Material Thickness Material Thickness .090 .110 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

66 DAYTONSUPERIOR.COM ® PEA GRAVEL ® Thermoform Plastic Formliner

General Information: The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and excellent overall performance. Its reuse factor is 10, subject to pattern configuration, proper handling and jobsite configurations. Care and Handling: To protect from thermal deformation, formliners should not be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F70609 F70637 Uses Uses 1 Up to 10 Material Thickness Material Thickness .070 .070 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

No Photo Available

67 DAYTONSUPERIOR.COM ® PHOENIX LIMESTONE ® Thermoform Plastic Formliner

4' 1

IR configurations.

10' ND Care and Handling: To protect from thermal deformation, formliners should not

ER be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should TT be covered with a tarpaulin when not in use. This helps

PA prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F70658 F70659 Uses Uses 1 Up to 10 Material Thickness Material Thickness .090 .110 Standard Dimensions Standard Dimensions 4' x 10' 4' x 10' Color Color White Gray

68 DAYTONSUPERIOR.COM ® RANDOM FIELDSTONE LARGE ® Thermoform Plastic Formliner

4' 3/4" - 1.5"

Styrene ABS Product Code # Product Code # F70334 F70274 Uses Uses 1 Up to 10 Material Thickness Material Thickness .150 .150 Standard Dimensions Standard Dimensions 4' x 10' 4' x 10' Color Color White Gray

69 DAYTONSUPERIOR.COM ® ROUGH ASHLAR STONE ® Thermoform Plastic Formliner

4' 3 " 10° 3 8 4 " 1 12 "

General Information: The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and excellent overall performance. Its reuse factor is 10, subject to pattern configuration, proper handling and jobsite configurations. Care and Handling: To protect from thermal deformation, formliners should not 10' be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F70620 F70648 Uses Uses 1 Up to 10 Material Thickness Material Thickness .150 .150 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

No Photo Available

70 DAYTONSUPERIOR.COM ® ROUND STONE ® Thermoform Plastic Formliner

4' Typical Stone 1" Diameter 3" 8

General Information: The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and excellent overall performance. Its reuse factor is 10, subject to pattern configuration, proper handling and jobsite configurations. Care and Handling: 10' To protect from thermal deformation, formliners should not be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F30722 F30251 Uses Uses 1 Up to 10 Material Thickness Material Thickness .070 .070 Standard Dimensions Standard Dimensions 4' x 10' 4' x 10' Color Color White Gray

71 DAYTONSUPERIOR.COM ® RUNNING BOND ASHLAR STONE ® Thermoform Plastic Formliner

1' 3 1" 3" 8" 114 4 3" 4 1 12"

1 114" 1" General Information: 1'-114 The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and 3" excellent overall performance. Its reuse factor is 10, subject 4 to pattern configuration, proper handling and jobsite 9' configurations. 8' Care and Handling: To protect from thermal deformation, formliners should not be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F70340 F70342 Uses Uses 1 Up to 10 Material Thickness Material Thickness .150 .150 Standard Dimensions Standard Dimensions 9' x 4' 9' x 4' Color Color White Gray

72 DAYTONSUPERIOR.COM ® SAN ANTONIO DRY STACK ® Thermoform Plastic Formliner

No Profile Drawing Available

General Information: The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and excellent overall performance. Its reuse factor is 10, subject to pattern configuration, proper handling and jobsite configurations. No Formliner Care and Handling: To protect from thermal deformation, formliners should not Face Drawing Available be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F70619 F70647 Uses Uses 1 Up to 10 Material Thickness Material Thickness .090 .110 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

No Photo Available

73 DAYTONSUPERIOR.COM ® SEDONA STONE ® Thermoform Plastic Formliner

4' Varies

1 12 "

Styrene ABS Product Code # Product Code # F70618 F70646 Uses Uses 1 Up to 10 Material Thickness Material Thickness .150 .150 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

No Photo Available

74 DAYTONSUPERIOR.COM ® SHALLOW FIELDSTONE ® Thermoform Plastic Formliner

4' 5" 8

General Information: The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and excellent overall performance. Its reuse factor is 10, subject to pattern configuration, proper handling and jobsite configurations. Care and Handling: To protect from thermal deformation, formliners should not 10' be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F3170576 F3170501 Uses Uses 1 Up to 10 Material Thickness Material Thickness .090 .110 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

75 DAYTONSUPERIOR.COM ® SMALL CRUSHED STONE ® Thermoform Plastic Formliner

4' 1/4"

General Information: The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and excellent overall performance. Its reuse factor is 10, subject to pattern configuration, proper handling and jobsite configurations. Care and Handling: 10' To protect from thermal deformation, formliners should not be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F30721 F30250 Uses Uses 1 Up to 10 Material Thickness Material Thickness .070 .070 Standard Dimensions Standard Dimensions 4' x 10' 4' x 10' Color Color White Gray

76 DAYTONSUPERIOR.COM ® SOUTHWEST ASHLAR STONE ® Thermoform Plastic Formliner

4' 3/4" Nominal 11/2"Max.

General Information: The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and excellent overall performance. Its reuse factor is 10, subject to pattern configuration, proper handling and jobsite configurations. Care and Handling: 10' To protect from thermal deformation, formliners should not be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F30430 F30428 Uses Uses 1 Up to 10 Material Thickness Material Thickness .150 .150 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

77 DAYTONSUPERIOR.COM ® STANDARD DRY STACK ® Thermoform Plastic Formliner

1" 4' 14

General Information: The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and excellent overall performance. Its reuse factor is 10, subject to pattern configuration, proper handling and jobsite configurations. Care and Handling: 10' To protect from thermal deformation, formliners should not be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F3170578 F3170503 Uses Uses 1 Up to 10 Material Thickness Material Thickness .150 .150 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

78 DAYTONSUPERIOR.COM ® TEXAS CHISELED LIMESTONE ® Thermoform Plastic Formliner

No Profile Drawing Available

General Information: The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and excellent overall performance. Its reuse factor is 10, subject to pattern configuration, proper handling and jobsite configurations. No Formliner Care and Handling: To protect from thermal deformation, formliners should not Face Drawing Available be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F70616 F70644 Uses Uses 1 Up to 10 Material Thickness Material Thickness .150 .150 Standard Dimensions Standard Dimensions 9'-11" x 3'-7½" 9'-11" x 3'-7½" Color Color White Gray

No Photo Available

79 DAYTONSUPERIOR.COM ® TEXAS FOSSILIZED LIMESTONE ® Thermoform Plastic Formliner

3 4' 8 "

General Information: The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and excellent overall performance. Its reuse factor is 10, subject to pattern configuration, proper handling and jobsite configurations. Care and Handling: To protect from thermal deformation, formliners should not 10' be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F70610 F70638 Uses Uses 1 Up to 10 Material Thickness Material Thickness .070 .070 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

No Photo Available

80 DAYTONSUPERIOR.COM ® TRINITY ASHLAR STONE ® Thermoform Plastic Formliner

4' Varies

1 12 "

General Information: The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and excellent overall performance. Its reuse factor is 10, subject to pattern configuration, proper handling and jobsite configurations. Care and Handling: 10' To protect from thermal deformation, formliners should not be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F70614 F70642 Uses Uses 1 Up to 10 Material Thickness Material Thickness .150 .150 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

No Photo Available

81 DAYTONSUPERIOR.COM ® VERTICAL FLAGSTONE ® Thermoform Plastic Formliner

4' 3 8"

4' General Information: The Styrene and ABS formliners are an economical solution for providing architectural pattern reproductions. The Styrene plastic formliner is a perfect alternative for single use applications which costs less than other liners. The ABS plastic formliner exhibits good impact resistance and excellent overall performance. Its reuse factor is 10, subject to pattern configuration, proper handling and jobsite configurations. 9' Care and Handling: To protect from thermal deformation, formliners should not be exposed to temperatures above 140°F (60°C). To avoid discoloration from sunlight exposure, formliners should be covered with a tarpaulin when not in use. This helps prolong the life of the material and keeps the material clean. Form Liners are subject to thermal expansion and 1 5' contraction +/- ∕8" @ 70°F. Keep away from steam, acids, and certain fuels.

Styrene ABS Product Code # Product Code # F70599 F70516 Uses Uses 1 Up to 10 2' Material Thickness Material Thickness .090 .110 Standard Dimensions Standard Dimensions 4' x 9' 4' x 9' Color Color White Gray

82 DAYTONSUPERIOR.COM ® WEATHERED ROCK ® Thermoform Plastic Formliner

Styrene ABS Product Code # Product Code # F70624 F70652 Uses Uses 1 Up to 10 Material Thickness Material Thickness .150 .150 Standard Dimensions Standard Dimensions 10' x 4' 10' x 4' Color Color White Gray

No Photo Available

83 DAYTONSUPERIOR.COM