Lockout/Tagout and Safety Products the IDEAL Advantage Training

Lockout/Tagout and Safety Products The IDEAL Advantage Training

IDEAL has developed a variety of training programs and materials to help electricians use products correctly and efficiently. For more details on the training programs available please contact IDEAL customer service or your local IDEAL Sales Representative. • Lockout/Tagout Safety and Procedures • Arc Flash Safety & 1000V Insulated Tools • Test and Measurement - Basics of DMM Safety - Basics of Meters - Advance Meter Training - Basics Grounding Measurements - Basics of Insulation Testing - Basics of Power Quality

Complete Line of Safety and Electrical Products

Whether it’s installing or trouble shooting electrical systems or data networks, IDEAL has the products that professionals need to get the job done.

• Lockout/Tagout • Fish Tape, Benders & Lubes

TM • Insulated Tools • Hand Tools • Test & Measurement • Tool Bags and Totes • Wire Management • DataComm • Wire Connectors P-441 LO/TO Catalog 11/05 1/26/06 10:41 AM Page 1

Wire Management Lockout/Tagout Kits ...... 2-4 Lockout/Tagout Stations ...... 3, 5 Lockout/Tagout Training Videos and Compliance Manual . 6 Circuit Breaker Lockout Devices ...... 7 Large Circuit Breaker Lockout Devices ...... 8 Circuit Breaker Cross Reference Guide ...... 9-14 Circuit Breaker Panel Lockout System ...... 15 Miniature Circuit Breaker Devices and Guide ...... 16 Fluid Power Lockout Devices ...... 17 Misc Lockout Devices ...... 18 Safety Padlocks ...... 19 Heavy Duty Tags, Hasps and Lock Box ...... 20 Arc Flash, Voltage, and Conduit Markers ...... 21 Safety and Facility Signs ...... 22 Barricade and Underground Tapes ...... 23 Cable Ties ...... 24-25 Pro-Series® Master Locks ...... 26

Test and Measurement TightSight™ Clamp Meters ...... 27 Circuit Tracers ...... 27 SplitJaw™ Smart Meter ...... 28 700 Series 4-in-1 Tester ...... 28 Multimeters ...... 28 Insulation Testers ...... 29 Vol-Con® Testers ...... 29 3 Phase/Motor Rotation Tester ...... 30 Circuit Analyzer ...... 30 Circuit Identifier ...... 30 Non-Contact Voltage Tester ...... 30 GFI Circuit Tester ...... 30 Table of Contents Table

Tools and Totes Ergonomic Wire Strippers ...... 31 Insulated Tools and Kits ...... 32-35 Non-Conductive Screw/Nutdriver and Fuse Pullers . . . . 35

Wire Installation Fiberglass Fish Tapes ...... 36 Cable Gripping Gloves ...... 36 44-969 44-800 44-849 44-818 44-973 44-809 44-783 44-906 44-800 44-833* IA-3240 44-916** can be special ordered by contacting IDEAL Customer Easy to carry, zippered pouch holds a worker’s personal pad- pouch holds a worker’s zippered Easy to carry, locks and other small devices A starter selection of the lockout/tagout devices every electri- every A starter selection of the lockout/tagout devices cian/maintenance person needs for belt loops and d-rings Small nylon zipper pouch features carts and more easy attachment to belts, tool pouches, tool Service. Personal Lockout Pouch Kit 1 in. Safety Lockout HaspLockout TagsRed Safety Padlocks - Keyed AlikePersonal Lockout Pouch 1 3 1 12 DescriptionKit 44-969 Includes: Qty. Cat. No. Cat. No. Lockout Tags – Do Not Operate (striped)Lockout Tags 110V Plug LockoutZipper Pouch 2 1 1 Starter Lockout/Tagout Kit Starter Lockout/Tagout Universal 277V Breaker/Single-Pole LockoutUniversal Multi-Pole Lockout3/4 in. Shackle Red Padlock 1 1 in. Safety Lockout Hasp 1 1 1 DescriptionKit 44-973 Includes: Qty. No. Cat. Cat. No. *Masterlock equivalent. **Keyed alike and master keyed padlocks ■ ■ ■ Quantities listed in kit description are for individual pieces, not carded packages. Quantities listed in kit description are for individual pieces, not Starter Lockout/Tagout Kit Lockout/Tagout Starter 44-970 44-810 44-809 44-807 44-789 44-906 44-800 44-833 44-783 44-818 44-979 44-824 44-820 IA-3240 www.idealindustries.com for Customer Service 1-800-435-0705 2 Small nylon zipper pouch features belt loops and d-rings for belt loops and d-rings Small nylon zipper pouch features carts and more easy attachment to belts, tool pouches, tool A great selection of the most popular lockout/tagout devices selection of the most popular lockout/tagout A great Lockout Tags –Lockout Tags Do Not Operate (striped)Universal Multi-Pole Breaker Lockout110V Plug Lockout 5 1 1 Hinged Single-Pole Breaker LockoutUniversal 277V Breaker Lockout/Single Pole480/600V Breaker Lockout Switch LockoutWall 1 3/4 in. Red Padlock 2 1 in. Safety Lockout Hasp 1 Zipper Pouch 1 1 1 1 Basic Lockout/Tagout Kit Basic Lockout/Tagout Basic Plus Lockout/Tagout Kit Basic Plus Lockout/Tagout LockoutGate Valve LockoutBall Valve 1 1 DescriptionKit 44-970 Includes: Qty. No. Cat. Cat. No. DescriptionKit 44-979 Includes all 44-970 PLUS: Qty. Cat. No. Cat. No. ■ ■ Quantities listed in kit description are for individual pieces, not carded packages. Basic Lockout/Tagout Kit Basic Lockout/Tagout

Lockout/Tagout Kits P-441 LO/TO Catalog 11/05 1/26/06 10:41 AM Page 2 Page AM 10:41 1/26/06 11/05 Catalog LO/TO P-441 P-441LO/TOCatalog11/051/26/0610:41AMPage3 -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService Quantities listedinkitdescriptionareforindividualpieces,notcardedpackages. Standard Lockout/Tagout Kit Group Lock Box ■ ■ ■ ■ ■ ■ ecito Cat.No. Cat.No. Qty. Kit 44-971Includes: Description ecito Cat.No. Description iprPuh1 2 1 1 2 5 Zipper Pouch 5 2 Universal Multi-PoleBreakerLockout 1 1 Cleat for480/600VBreakerLockout Cleat for277VBreakerLockout 1 Lockout Tags –DoNotOperate(striped) Lockout Tags –DoNotOperate 1 in.SafetyLockoutHasps 2 in.ShackleRedPadlocks 3 110V SmallPlugLockout 2 Wall SwitchLockout 480/600V BreakerLockout Universal 277VBreakerLockout/SinglePole Hinged Single-PoleBreakerLockout Standard Lockout/Tagout Kit Group LockBox easy attachmenttobelts,toolpouches,cartsandmore Small nylonzipperpouchfeatures beltloopsandd-ringsfor for maintenance workersorcontractors Excellent selectionoflockout/tagoutdevices,tagsandlocks Compact 8-3/4 in.x3-1/26design unauthorized entryandjob-siteabuse Heavy-duty steelconstructionresists personally locktheclosedbox Allows upto13 individualsto complex workteamsituations Helps ensure maximumsecurityfor IA-3240 44-783 44-786 44-785 44-833 44-830 44-800 44-907 44-818 44-789 44-807 44-809 44-810 44-971 44-804 ■ ■ ■ ■ Lock Stations Lockout/Tagout Large MouthBag ■ ■ ■ ecito Cat.No. Heavy-Duty LockoutTags andtwo1in.SafetyLockoutHasps(44-800) Ten-Lock StationKitincludestenredsafetyPadlocks(44-916),24 Ten-Lock Station(boardonly) Heavy-Duty LockoutTags andtwo1in.SafetyLockoutHasps(44-800) Four-Lock StationKitincludesfourredsafetyPadlocks(44-916),12 Four-Lock Station(boardonly) Description ecito Cat.No. Lockout/Tagout EmbroideredBag-16in.long Description Lockable toprevent • contents cover protects Exclusive translucent storage and removal padlock andhasp clips provide easy Reinforced snap-lock stations strength of typical quadruple theimpact heat resistance and material provides twicethe Resilient polycarbonate parts construction eliminatesloose Integrated, one-piece molded Innovative hingeholdscover openfor easyproduct • strap removable shoulder construction with Durable multi-ply itself open re-inforced tohold for easyaccessand Top openscompletely lockout/tagout needs portability ofyour Ideal for bothstorage and selection for simpleaccess control lockout padlocks.Recommendusingacombinationlock loss ofvaluablesafety Wire Management 44-806 44-805 44-778 44-777 44-980 3

Lockout/Tagout Kits 44-807 44-789 44-718 44-820 44-800 44-791 44-819 44-849 44-815 44-816 44-824 44-785 44-786 44-916 44-783 44-974 44-810 44-809 IA-3241 An industrial selection of lockout/tagout devices oil and chemicals resists plastic tool box Polypropylene 480/600V Breaker Lockout Switch LockoutWall 110V Small Plug Lockout LockoutBall Valve 1 in. Safety Lockout HaspRed Labeled Lockout220/550V Plug Lockout 1 – Do Not Operate (striped)Lockout Tags Fuse Blockout 1 1 Fuse Blockout LockoutGate Valve 10 2 1 Cleat for Breaker Lockout #44-809Cleat for 480/600V Breaker Lockout 1 1 Red Lockout PadlocksUniversal Multi-Pole Breaker Lockout BoxTool 1 1 1 1 1 2 4 1 Description Kit Industrial Lockout/Tagout Hinged Single-Pole Breaker LockoutUniversal Breaker/Single Pole Lockout 3 2 Cat. No. Kit 44-974 Includes: Qty. Cat. No. Industrial Lockout/Tagout Kit Lockout/Tagout Industrial ■ ■ Quantities listed in kit description are for individual pieces, not carded packages. 44-800 44-791 44-819 44-849 44-815 44-816 44-824 44-785 44-786 44-783 44-972 44-810 44-809 44-807 44-789 44-718 IA-3241 www.idealindustries.com for Customer Service 1-800-435-0705 4 Ideal for plant facility personnel to keep all lockout/tagout plant facility Ideal for place devices in one convenient oil and chemicals resists plastic tool box Polypropylene Gate Valve LockoutGate Valve Cleat for Breaker Lockout #44-809Cleat for 480/600V Breaker LockoutUniversal Multi-Pole Breaker Lockout BoxTool 1 1 3 1 1 1 in. Safety Lockout HaspsRed Labeled Lockout220/550V Plug Lockout – Do Not Operate (striped)Lockout Tags Fuse BlockoutFuse Blockout 10 3 1 1 1 1 Hinged Single-Pole Breaker LockoutUniversal Breaker/Single Pole Lockout480/600V Breaker Lockout Switch LockoutWall 110V Plug Lockout 5 3 1 2 1 Description Kit Plant Facility Lockout/Tagout Cat. No. Kit 44-972 Includes: Qty. No. Cat. ■ ■ Quantities listed in kit description are for individual pieces, not carded packages. Plant Facility Lockout/Tagout Kit Lockout/Tagout Plant Facility

Lockout/Tagout Kits P-441 LO/TO Catalog 11/05 1/26/06 10:41 AM Page 4 Page AM 10:41 1/26/06 11/05 Catalog LO/TO P-441 P-441LO/TOCatalog11/051/26/0610:41AMPage5 Industrial Lockout/Tagout Station -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService ■ ■ ■ i 495Icue:Qy Cat.No. Qty. Kit 44-975Includes: ecito t.Cat.No. Qty. Description aie /w hle 1 1 1 1 1 10 Cabinet w/twoshelves 1 4 1 Pnuematic Lockout Ball Valve Lockout 1 2 Gate Valve Lockout-2-1/2in.to5 Gate Valve Lockout-1in.to2-1/2 Lockout Tags –DoNotOperate 1 Cat.No. 220/550V PlugLockout 1 100V SmallPlugLockout Red SafetyPadlocks 2 1 in.SafetyLockoutHasp Wall SwitchLockout 2 Cleat for480/600VBreakerLockout 2 2 480/600V BreakerLockout Universal Multi-PoleBreakerLockout Cleat forUniversalSingle-PoleLockout Universal Single-PoleBreakerLockout Hinged Single-PoleBreakerLockout Industrial Lockout/Tagout Station–16”Hx14”W6”D Description xr hl 1 Extra shelf for frequent reminders ofproper lockoutprocedures Lockout tipsare safety conveniently locatedinsideofdoor (extra shelves available) All metal,lockablecabinetscomewithtwoadjustableshelves easily transported Large Lockout/Tagout Stationcanbewallmountedor IA-4989 IA-4990 44-774 44-820 44-825 44-824 44-849 44-819 44-718 44-916 44-800 44-789 44-786 44-807 44-783 44-785 44-809 44-810 44-975 Station Micro Lockout Lockout Station Circuit Breaker Station Machine Lockout ■ ■ ■ ■ ■ ■ i 498Icue:Qy Cat.No. Qty. Kit 44-978Includes: Cat.No. Qty. Kit 44-977Includes: Cat.No. Qty. Kit 44-976Includes: ecito Cat.No. 1 1 Red SafetyPadlock 1 in.SafetyLockoutHasp Micro LockoutStation-8”Hx6-1/4”W2-3/4”D Description 1 Cat.No. 1 5 2 Circuit BreakerLockout/Tagout only 2 2 Red SafetyPadlock Lockout Tag –DoNotOperate Universal Multi-PoleBreakerLockout Universal Single-PoleBreakerLockout Hinged Single-PoleBreakerLockout Circuit BreakerLockout/Tagout Station–8”Hx6-1/4”W2-3/4”D Description Cat.No. 1 1 2 1 Machine LockoutTagout Boardonly Lockout Tag –DoNotOperate 220/550V PlugLockout Red SafetyPadlock Machine Lockout/Tagout Station–8-1/2”HxW4”D Description ir oku/aotBadol 1 2 Micro Lockout/Tagout Boardonly Lockout Tags –DoNotOperate job/function equipment todoaspecific Holds justthenecessary your lockoutjob mounted onorcloseby Compact designcanbe of the2002NEC Comply witharticle430.102B instant, easyaccess electrical breaker boxes for to bemountedonornear Polystyrene board isdesigned applications usage your pluglockoutbetween maintain afocal pointfor storing Yellow acrylicstationhelps wall, machineryortabletop Conveniently mountsoneithera Wire Management IA-4992 IA-4991 IA-4993 44-916 44-800 44-978 44-916 44-849 44-783 44-809 44-810 44-977 44-849 44-819 44-916 44-976 44-849 5

Lockout/Tagout Stations Cat. No. 44-942 44-954 44-940 44-963 44-941 44-953 www.idealindustries.com for Customer Service 1-800-435-0705 Lockout/Tagout quiz guide and employee 6 • in the workplace. importance of Lockout/Tagout the conveys video effectively 10-minute • from steps to re-energize apply and five to properly steps the seven Demonstrates • during shift changes Lockout/Tagout maintaining instructions for Provides • and maintain lockout devices remove Shows how to apply, • sessions training employee-refresher Also suitable for • instructor’s Cards, Reference Employee Procedure Includes video, ten Lockout/Tagout • also available (44-954) Cards Reference Additional Employee 1 – Reviews the OSHA language in understandable, everyday Standard your to help you develop a step-by-step program 2 – Provides Compliance Program “Lockout/Tagout” training employee for required 3 – Outlines the type of information you in complying with need to assist you and your employees 1 – Information in an easy to understand and presented Standards OSHA’s Lockout/Tagout entertaining format includes a leaders guide, training case and video comes in a plastic storage 2 – This It.” It and Tag six steps to “Lock of the reminder handbook with quiz, and wallet card Lockout/Tagout Video Training Program Video Training Lockout/Tagout Program Reference Cards Video Training Lockout/Tagout Compliance Manual Lockout/Tagout Practices OSHA 1910.331 thru 1910.335 & 1910.339 (129 page manual) Electrical Safety Related Work Video Training Real, Real Life Lockout/Tagout Description Real, Real Life Lockout/Tagout Handbooks, 10/pack Real, Real Life Lockout/Tagout Lockout/Tagout Video Training Program for Employee Safety and OSHA Safety Employee Compliance. for Program Training Video Lockout/Tagout in complying with facility to assist your Compliance Manual Regulations Lockout/Tagout Federal Video Training Lockout/Tagout Real, Real Life The Lockout/Tagout Training Programs and Programs Training Lockout/Tagout Manuals Compliance

Lockout/Tagout Training Programs P-441 LO/TO Catalog 11/05 1/26/06 10:41 AM Page 6 Page AM 10:41 1/26/06 11/05 Catalog LO/TO P-441 P-441LO/TOCatalog11/051/26/0610:41AMPage7 -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService Lockout Station Circuit Breaker Universal Multi-Pole Breaker Lockout ■ ■ ■ ■ i 497Icue:Qy Cat.No. Qty. Kit 44-977Includes: ecito t.Pg Cat.No. Qty./Pkg. Description e aeyPdok1 Cat.No. 1 Code. 5 Electric National 2002 the of 430.102B article with Comply 2 Circuit BreakerLockout/Tagout only 2 2 Red SafetyPadlock Lockout Tag –DoNotOperate Universal Multi-PoleBreakerLockout Universal Single-PoleBreakerLockout Hinged Single-PoleBreakerLockout Circuit BreakerLockout/Tagout Station–8”Hx6-1/4”W2-3/4”D Description nvra ut-oeBekrLcot1 Universal Multi-PoleBreakerLockout Please seebreaker guidefor yourapplication. no cabletiesortoolsrequired andlockstiebarinplace; Easy toinstall—thumbscrew secures D (2/3poles)andGeneral Switch Co. ITESylvania, Challenger,including GE, Bryant,Westinghouse, Square Works withmostmajormulti-polebreakers withtie-bartypeswitches access instant, easy breaker boxes for near electrical mounted onor is designedtobe Polystyrene board IA-4992 44-916 44-849 44-783 44-809 44-810 44-977 44-783 Hinged Single-Pole Breaker Lockout Single-Pole Breaker Lockout ■ ■ ■ ■ ■ ■ ecito t.Cr Cat.No. Qty./Card Description Cat.No. Qty./Card Description igdSnl-oeBekrLcot3 Hinged Single-PoleBreakerLockout 3 3 Cleat forSingle-PoleBreakerLockout Universal Single-PoleBreakerLockout Please seebreaker guidefor yourapplication Ideal for applications where panelclosure ispreferred lever inoffposition toisolateandprevent breaker use Hinged single-polelockoutwithlockingpostdesign,locks Please seebreaker guidefor yourapplication Westinghouse, ITE,Square DandFederal Pacific breakers throws with large angularrotation commonlyfound onsome Snap oncleataccessorysecurely locksoutlongslidingswitch single-pole breakers Unique screw clampdesignworkswellwithmost Wire Management 44-810 44-785 44-809 7

Circuit Breaker Lockout Devices 44-823 Designed to lockout large 480/600VDesigned to lockout large switches breaker in. thick up to 2-1/2 in. wide and 7/8 Easy to install — no tools required Unique Lockout system for oversized 480/600V oversized system for Unique Lockout Breakers Circuit panel can be permanently installed into an electrical System putting all lockout items at the point of need required – no tools mounting rails Easy installation of adhesive mate with holes in locking arms for in mounting rails Pegs security of arm when lock is in place arms lock on green Red arms lock off, Large Breaker Lockout 1 Description Qty. Cat. No. ■ ■ ■ ■ ■ ■ ■ To comply with: To locking or adding a lock to the disconnecting for provisions “The at the switch or means shall be permanently installed on or used as the disconnecting means.” breaker circuit Article 430.102(B) Motor 2002 NEC. Large Breaker Lockout Breaker Large 44-822 44-807 44-786 1 www.idealindustries.com for Customer Service 1-800-435-0705 8 480/600V lockout device designed primarily for switches breaker circuit D single-throw/multi-pole Square locks out long sliding securely Snap-on cleat accessory commonly found angular rotation with large switch throws Pacific D and Federal Square ITE, on some Westinghouse, breakers your application guide for Please see breaker 480-600 Volt Oversized Circuit Breaker System – Cleat for Single-Throw/Multi-Pole Lockout 1 Single-Throw/Multi-Pole Breaker Lockout 1 Description Qty. Cat. No. Description Qty. Cat. No. ■ ■ ■ Oversized Circuit Breaker Lockout System Lockout Breaker Circuit Oversized Single-Throw/Multi-Pole Breaker Lockout Breaker Single-Throw/Multi-Pole

Breaker Lockouts P-441 LO/TO Catalog 11/05 1/26/06 10:41 AM Page 8 Page AM 10:41 1/26/06 11/05 Catalog LO/TO P-441 P-441LO/TOCatalog11/051/26/0610:41AMPage9 auatrrMdlCasfcto oe eieNumber Device Poles Classification Model Manufacturer -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService Breaker recommendationchartisforreferenceonly. Securityoffitshouldbeverified. ulrHme H H144-810 1 44-783 2-3 CH 44-810 CH 1 44-786 CHQ 44-807 2-4 44-823 CH CHP 44-807 2-3 44-783 N-Frame 2-3 2-3 44-823 Cutler-Hammer M-Frame CHP 44-810 2-4 K-Frame CHND Cutler-Hammer CH 1 44-783 CHMDL CHLDL-Frame 4 CHKD Cutler-Hammer CH CHB Cutler-Hammer Cutler-Hammer CH 44-810 Cutler-Hammer 44-783 Cutler-Hammer 1 CHB 2-3 44-783 Cutler-Hammer CH2 2 44-783 CH CH 2-3 44-810 Cutler-Hammer BR 1 Cutler-Hammer BR CH Cutler-Hammer BRHH BR BRH 44-783 44-810 Cutler-Hammer 2-3 44-810 1 BRH Cutler-Hammer 1 44-783 BR Cutler-Hammer 2-3 44-809 BR 44-810 1 44-785 44-783 BR Cutler-Hammer Quicklag 1 2 44-809 Cutler-Hammer BD 44-809 1-2 Quicklag BAB 1 Cutler-Hammer BAB 44-783 44-807 Cutler-Hammer 44-810 BA 44-783 Cutler-Hammer 2-3 1 2-3 MP 44-810 NEJ SameasWDK Type C Cutler-Hammer 1 LM Cutler-Hammer 44-785 CDK Crouse Hinds C 44-809 44-809 1 Challenger 1 BC C Challenger Challenger BR Challenger Challenger Airpax Bryan C Bryant American Switch Airpax DA IDEAL IDEAL OCleat LO 44-764 44-768 44-809 44-764 44-764 44-768 44-809 44-764 44-764 44-768 44-809 44-764 44-764 44-764 44-768 44-809 44-764 44-764 44-764 44-809 44-764 44-764 44-809 44-764 44-809 44-764 44-809 44-764 44-764 44-764 44-764 44-764 44-764 44-809 44-764 44-809 44-768 44-764 auatrrMdlCasfcto oe eieNumber Device Poles Classification Model Manufacturer ulrHme H -rm - 44-809 1-3 44-809 G-Frame 44-809 1 1-3 44-809 1-3 G-Frame GHC 44-809 G-Frame 1-3 44-809 G-Frame GHBGFEP 1-3 GHB G-Frame 44-809 44-764 Cutler-Hammer 1-3 GDB G-Frame 2-3 Cutler-Hammer 44-809 GD G-Frame 2-4 F-Frame Cutler-Hammer 44-809 GC 2-4 44-809 Cutler-Hammer F-Frame GB 1-4 FS F-Frame Cutler-Hammer F-Frame FDC 44-785 Cutler-Hammer 44-809 FDB 44-809 Cutler-Hammer 44-809 Cutler-Hammer 2-3 1-4 FD Tri PacCur. Lim Cutler-Hammer FC44-809 F-Frame Cutler-Hammer 44-809 FB 1-4 Cutler-Hammer 44-809 EHD 1-4 E125-Frame Cutler-Hammer 44-809 EHC 1-4 E125-Frame Cutler-Hammer 44-809 EGS 44-809 1-4 E125-Frame Cutler-Hammer 2-4 EGE 44-809 E125-Frame Cutler-Hammer 2-4 EGB 44-809 F-Frame Cutler-Hammer 2-4 EFH F-Frame 44-809 Cutler-Hammer F-Frame EDH 44-809 Cutler-Hammer EDC 44-809 Cutler-Hammer E125-Frame ED 44-807 44-809 Cutler-Hammer 44-809 E125-Frame E125S 2-3 1 44-786 Cutler-Hammer E125-Frame E125H K-Frame 44-807 Cutler-Hammer E125-Frame E125E 2-4 CH 44-786 44-823 Cutler-Hammer 44-823 E125B 44-823 2-3 DK N-Frame 44-807 2-4 Cutler-Hammer 2-4 2-4 CSR M-Frame Cutler-Hammer 44-783 L-Frame CNDC L-Frame CNDN-Frame CL2 Cutler-Hammer CMDL Cutler-Hammer CLDC 44-810 44-807 CLD Cutler-Hammer 44-783 2-3 CL1 Cutler-Hammer 44-783 CL 2-3 Cutler-Hammer 2 Cutler-Hammer K-Frame Cutler-Hammer CH Cutler-Hammer CL CH CKD Cutler-Hammer CHSW CHQ Cutler-Hammer Cutler-Hammer Cutler-Hammer Cutler-Hammer Wire Management DA IDEAL IDEAL OCleat LO 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-768 44-809 44-764 44-764 9

Circuit Breaker Reference Guide 44-809 44-764 44-764 44-809 44-764 44-764 44-809 44-764 44-764 44-809 44-764 44-809 44-764 44-809 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 LO Cleat IDEAL IDEAL Cutler-Hammer QCD P Quicklag Type 1 44-810 Cutler-HammerCutler-HammerCutler-HammerCutler-HammerCutler-Hammer QCDCutler-Hammer QCGF QCGFEP P Quicklag Type QCHGFCutler-Hammer 2-3 QCHGFEP Quicklag 44-783 Quicklag QCHWCutler-Hammer Quicklag Quicklag 1 1 QCHWCutler-Hammer Quicklag 1 44-809 1 44-809 Cutler-Hammer QHCX 44-809 44-809 1 Quicklag 44-810 Cutler-Hammer QHCX Quicklag 2-3Cutler-Hammer QHPW 44-783 1 QuicklagCutler-Hammer 44-810 Cutler-Hammer QHPW Quicklag 2-3Cutler-Hammer QHPXCutler-Hammer 44-783 Cutler-Hammer 1 QuicklagCutler-Hammer QHPX Quicklag 44-810 Cutler-Hammer QPGF 2-3Cutler-Hammer QPGF QPGFEP 44-783 1 Quicklag QPGFEP Ground Fault QPHGF 44-810 Cutler-Hammer Ground Fault QPHGFEP 1Fed. Pacific Elec. 2-3 QPHW 1 44-783 Ground Fault 44-809 Ground Fault Fed. Pacific Elec. 44-809 Fed. Pacific Elec. 1 1 QPHW Quicklag 2 BABFed. Pacific Elec. 44-809 44-809 Fed. Pacific Elec. 2 NA Type 44-764 NA-single 1 Quicklag 44-764 Fed. Pacific Elec. 44-810 Fed. Pacific Elec. NA-tie bar 2-3Fed. Pacific Elec. Fed. Pacific Elec. NB 44-783 Fed. Pacific Elec. NB Type NB Type NASW Type 1Fed. Pacific Elec. 1 NEJH/HEJFed. Pacific Elec. 3 44-809 Fed. Pacific Elec. NBH GFI 44-809 44-807Fed. Pacific Elec. 2Fed. Pacific Elec. NE/NEF 44-764 44-786 Fed. Pacific Elec. NEJFed. Pacific Elec. 1 2 NFJ 3 1 44-809 NJJFrank Adams Elec. Co. 44-783 3 NJL 44-807 44-809 44-785 NMFrank Adams Elec. Co. NP-single 1 44-809 Frank Adams Elec. Co. PFrank Adams Elec. Co. 44-809 ToggleGeneral Electric BG 44-809General Electric Quicklag FA BA 44-785 44-809General Electric 1 44-809 1 HQC 44-785 44-807 44-809 44-809 44-807 SED 44-807 1 C Type SEH 44-809 1 SE150 1 3 44-809 SE150 44-809 44-809 2-3 44-809 2-3 44-809 Manufacturer Model Classification Poles Device Number 44-764 44-809 44-764 44-809 44-764 44-764 44-764 44-764 44-809 44-764 44-764 44-809 44-764 44-764 LO Cleat IDEAL IDEAL www.idealindustries.com for Customer Service 1-800-435-0705 10 Cutler-HammerCutler-HammerCutler-Hammer HBAWCutler-HammerCutler-Hammer HBAW Quicklag HBAXCutler-Hammer 1 QuicklagCutler-Hammer HBAX Quicklag 44-810 HFD 2-3Cutler-HammerCutler-Hammer HGHB 44-783 1 QuicklagCutler-HammerCutler-Hammer 44-810 HGHCCutler-Hammer 2-3 G-FrameCutler-Hammer HJD 2-4 44-783 Cutler-Hammer HKD G-Frame 44-807 Cutler-Hammer 1 HLD 1-4Cutler-Hammer HMCP 44-809 Cutler-Hammer HMCP 44-809 1 K-FrameCutler-Hammer HMCP 44-809 L-FrameCutler-Hammer HMCP L-Frame HMCP F-Frame J-Frame 2-4 HMDL K-Frame 2-4 44-807 HMDLBCutler-Hammer 3 L-Frame 3-4 44-823 Cutler-Hammer HND N-Frame 3 44-823 44-809 Cutler-Hammer 3 M-Frame HQP M-Frame 44-807 Cutler-Hammer 3 2-4 44-807 Cutler-Hammer 2-3 P Quicklag Type 44-823 Cutler-Hammer 44-807 HQP 2-3Cutler-Hammer 44-823 JD 1 44-823 Cutler-Hammer 44-786 JDB P Quicklag Type Cutler-Hammer 44-810 JDCCutler-Hammer KD 2Cutler-Hammer KDB J-FrameCutler-Hammer J-Frame 44-783 KDCCutler-Hammer J-Frame LACutler-Hammer 2-4 K-Frame LD 2-3 K-FrameCutler-Hammer LDB 44-807 2-4 K-FrameCutler-Hammer 44-807 Lim LDC Pac Cur. Tri 2-4 44-807 Cutler-Hammer 2-4 LH 2-3Cutler-Hammer 44-807 LHB L-Frame 2-4 44-807 Cutler-Hammer L-Frame 44-807 LJ 44-807 L-FrameCutler-Hammer MA 2-4Cutler-Hammer MC 2-3Cutler-Hammer 44-823 MD 2-4 44-823 Cutler-Hammer MDL CC Type 44-823 Cutler-Hammer MDSCutler-Hammer NBCutler-Hammer M-Frame ND 3 M-FrameCutler-Hammer 3 NDC M-Frame OPTIMCutler-Hammer Lim Pac Cur. 44-807 Tri 44-764 2-3 44-807 Cutler-Hammer 2-3 2-3 PB 2-3 44-823 Cutler-Hammer 2-3 QBGF 2-3 N-Frame 44-807 44-823 N-FrameCutler-Hammer 44-823 QBGF N-Frame 44-807 44-823 QBGFEP Lim Pac Cur. Tri 44-786 QBGFEP 2-4Cutler-Hammer 2-4 44-786 Quicklag 2-3 QBHGFCutler-Hammer 3 44-807 Quicklag QBHGFEP 44-807 Quicklag 44-823 44-807 Quicklag QBHW 44-786 1 44-786 Cutler-Hammer Quicklag Quicklag 2 1 44-786 QBHW 44-809 2 44-764 44-809 Quicklag QC 1 1 44-764 Quicklag 44-809 44-809 1 P Quicklag Type QC 44-810 2-3 1 44-783 P Quicklag Type 44-810 2-3 44-783 Cutler-Hammer GHCGFEP G-Frame 1 44-809 Breaker recommendation chart is for reference only. Security of fit should be verified. Breaker recommendation chart is for reference only. Manufacturer Model Classification Poles Device Number Circuit Breaker Reference Guide P-441 LO/TO Catalog 11/05 1/26/06 10:41 AM Page 10 Page AM 10:41 1/26/06 11/05 Catalog LO/TO P-441 P-441LO/TOCatalog11/051/26/0610:41AMPage11 auatrrMdlCasfcto oe eieNumber Device Poles Classification Model Manufacturer eea lcrcTHLAQLn 44-810 1 44-783 2-3 44-809 QLine 1 QLine 44-810 THHQL-A 1 QLine 44-783 THHQL 1-3 44-809 QLine THHQC-S General Electric 1 QLine General Electric THHQC-A QLine General Electric THHQC THHQB-S General Electric General Electric General Electric -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService eea lcrcTHBAQLn 44-810 1 QLine THHQB-A General Electric eea lcrcTF ,344-807 44-783 44-807 2,3 44-785 2-3 2-3 44-809 QLine 44-785 F225 44-807 44-809 3 44-807 1-3 44-807 THHQB LikeTED 2-3 THFK 2-3 THFJ F225 LikeTED 44-809 F225 44-809 THEF F225 3 General Electric 1-3 THED General Electric 44-809 TFL General Electric MagBreak 1-3 44-785 44-785 TFK E150 TFJ 44-785 General Electric 44-809 44-809 E150 44-809 TFC General Electric 3 3 General Electric 1-3 44-785 TF General Electric MagBreak General Electric 44-785 44-809 E150 TEY 1-3 44-785 General Electric 44-809 TEML 1-3 44-809 General Electric E150 TEL 1-3 44-785 General Electric E150 TEF 44-809 44-785 General Electric E150 TED 44-809 44-785 General Electric 44-785 TEB 44-809 MagBreak General Electric 44-809 44-785 TE MagBreak General Electric 44-809 44-785 TBC8 MagBreak General Electric 44-809 44-785 TBC6 Tri Break General Electric 44-809 TBC4 Tri Break General Electric TB8 44-809 Tri Break General Electric 2-3 44-809 TB6 Tri Break 2-3 General Electric 44-809 TB4 SF250 2-3 General Electric 44-809 TB1 SF250 2-3 General Electric SFP 44-809 SF250 General Electric 2-3 SFL SE150 General Electric SFH SE150 General Electric SEP General Electric SEL General Electric General Electric General Electric 44-764 44-809 44-764 44-764 44-764 44-809 44-764 44-764 44-764 44-809 DA IDEAL IDEAL OCleat LO 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 auatrrMdlCasfcto oe eieNumber Device Poles Classification Model Manufacturer Breaker recommendationchartisforreferenceonly. Securityoffitshouldbeverified. eea lcrcTLSQLn 44-809 1 44-783 44-810 2,3 1 QLine 44-809 44-809 2-3 1 QLine 44-810 TQL-S QLine 1 TQL-A 44-783 TQL TQD General Electric 2-3 44-809 TQC-S 1 QLine General Electric 44-810 General Electric General Electric 44-823 TQC-A 1 QLine 44-783 3 TQC 2-3 General Electric 44-823 QLine TQB-S 44-785 2-3 QLine General Electric 44-823 44-786 44-809 General Electric TQB-A K1200 44-786 44-807 3 44-786 44-786 TQB 44-807 General Electric TKM4365000 44-807 44-807 TKMA8 MagBreak 3 44-807 2-3 TKM8 2-3 2-3 44-786 TKM4 General Electric TJS3604S MicroVersaTrip 44-807 TKC J600 44-807 TJK636F000 General Electric J600 3 44-809 TK4V General Electric 2-3 TJS General Electric TJK6 TJD432400WL General Electric TJK4 44-809 TJJ General Electric MagBreak TJD 1 General Electric General Electric 44-810 General Electric TJC 1 QLine General Electric 44-783 TJ4 General Electric 44-764 2-3 General Electric QLine 3 THQL-S 44-809 QLine General Electric 2-3 General Electric QLine 44-809 THQL-A 1 THQL General Electric QLine 44-783 THQDBL 2-3 QLine General Electric 44-810 THQD 1 General Electric 44-783 QLine General Electric THQC-S 2-3 44-809 QLine THQC-AL 1 General Electric QLine 44-810 General Electric THQC-A 1 QLine 44-783 THQC General Electric 2,3 44-786 44-823 44-786 QLine THQB-S 44-807 2-3 44-823 General Electric QLine 44-807 2-3 2-3 General Electric 2-3 THQB-A K1200 44-809 THQB General Electric K1200 J600 THLC1 1 J600 THKM8 General Electric THKM12 THJK6 QLine General Electric THJK4 General Electric General Electric THHQL-S General Electric General Electric General Electric General Electric Wire Management HCCretLmtn 3 THLC CurrentLimiting DA IDEAL IDEAL OCleat LO 44-764 44-764 44-809 44-764 44-764 44-809 44-764 44-764 44-764 44-809 44-764 44-764 44-764 44-807 44-764 44-764 44-809 44-764 44-764 44-807 44-764 44-764 44-764 44-809 44-764 44-764 44-764 44-809 44-764 44-809 44-764 11

Circuit Breaker Reference Guide 44-764 44-809 44-764 44-764 44-809 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-807 44-786 44-764 44-809 44-764 44-764 44-809 44-764 44-764 44-764 44-764 44-764 44-764 LO Cleat IDEAL IDEAL Siemens ITESiemens ITESiemens ITESiemens ITESiemens ITE HJXD6-ASiemens ITESiemens ITE HMD6Siemens ITE HMXD6 HND6Siemens ITE HNXD6 HPD6 HPXD6Siemens ITE 2-3 HQJ2-H 44-807 Siemens ITE 2-3 2-3 HQP 44-823 44-823 Siemens ITE 2-3 2-3 HQP 44-823 Siemens ITE 44-823 3 HQPP 3 3Siemens ITE 44-823 44-823 Siemens ITE 44-809 HQPPSiemens ITE 1Siemens ITE HQPPH 44-810 2-3 HRD6 HRXD6 44-783 1 JD6-A 44-810 JJ3 2-3 44-783 2 44-783 3 3 2-3 44-823 44-823 44-807 44-807 Siemens ITESiemens ITESiemens ITE QJH22B QJH23B EE3 2, 3 2, 3 44-809 44-809 44-785 44-785 44-809 44-785 Siemens ITESiemens ITESiemens ITESiemens ITE EH3Siemens ITE EQPSiemens ITESiemens ITE ETSiemens ITE FD6ASiemens ITE FJ2-BSiemens ITE F-FrameSiemens ITE FJ3 FJ6 FXD6A 4 44-809 FXD6-ETISiemens ITE 44-783 44-785 44-809 GFSiemens ITE 2-3 HBL 44-785 2-3 44-807 44-809Siemens ITE 44-786 HBL 2 44-785 2-3Siemens ITE 2 2-3 44-807 HBQ 44-807 44-807 44-807Siemens ITE 44-786 1 44-786 44-786 Siemans ITE HBQ 1 44-809 Siemens ITE HE4 44-810 Siemens ITE 2-3 HED4Siemens ITE 44-783 HED6 1Siemens ITESiemens ITE 44-810 HFD6Siemens ITE 2-3 HFXD6Siemens ITE HHED6 44-783 Siemens ITESiemens ITE HHFD6 1-3 HHJD6 44-809 HHJXD6 44-809 2-3 HJD6 HJD6-A 44-809 2-3 HJXD6 2-3 44-807 2-3 44-807 44-809 44-786 2-3 44-786 2-3 44-807 2-3 44-807 44-807 2-3 44-786 2-3 44-807 2-3 44-807 44-807 Manufacturer Model Classification Poles Device Number 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-809 44-768 44-764 44-764 44-764 44-809 44-764 44-764 44-809 44-764 44-764 44-764 44-764 44-764 44-809 44-764 44-764 44-764 LO Cleat IDEAL IDEAL 44-823 CPD6 3 www.idealindustries.com for Customer Service 1-800-435-0705 12 Siemens ITESiemens ITESiemens ITESiemens ITE E2Siemens ITE E4Siemens ITE ED2Siemens ITE ED4Siemens ITESiemens ITE ED6Siemens ITE ED6-ETISiemens ITESiemens ITE 44-809 1Siemens ITE EE3 1-3 44-809 EE 44-809 EH 1-3 ET-JJ QJ3B 44-809 1-3 QJ22B QJ23B 3 44-809 44-809 1, 2, 3 1, 2, 3 44-809 44-809 44-809 3 2, 3 44-785 2, 3 44-785 44-807 44-785 44-809 2, 3 44-809 44-786 44-809 44-785 44-785 44-785 Siemens ITESiemens ITESiemens ITE Siemens ITE CMD6-ETI CND6 CQD 3 44-823 3 44-823 1-3 44-809 44-785 Heinemann SMG4Heinemann HeinemannHeinemannHeinemannHeinemannHeinemannHeinemannMerlin Gerin AMIZSiemens ITE 1 KU KL 44-809 LB LF LJ CJ BL 1 400 Amp series 44-809 1 3 1 44-809 44-807 1 44-809 1 44-809 44-786 1 44-809 44-785 1 44-809 44-785 44-810 44-785 Siemens ITESiemens ITESiemens ITE BLSiemens ITE BLF-GFISiemens ITE BLHSiemens ITE BLHSiemens ITE 2-3 BQ 2Siemens ITE 44-783 44-783 Siemens ITE BQ 1 BQCHSiemens ITE 44-810 2-3 BQDSiemens ITE 44-783 BQD6 1Siemens ITE 44-810 BQHSiemens ITE 2-3Siemens ITE 1-3 44-783 Siemens ITE BQH 44-809 Siemens ITE 1-3 CED6Siemens ITE 44-809 Siemens ITE 1-3 CFD6Siemens ITE CFD6-ETI 44-809 1 CJ3 CJD6 CJD6-ETI 44-810 2-3 CLF CMD6 44-783 2-3 44-809 2-3 2-3 44-807 44-807 2-3 2-3 44-786 44-786 44-807 44-807 44-807 2 3 44-807 44-823 44-786 Breaker recommendation chart is for reference only. Security of fit should be verified. Breaker recommendation chart is for reference only. Manufacturer Model Classification Poles Device Number Circuit Breaker Reference Guide P-441 LO/TO Catalog 11/05 1/26/06 10:41 AM Page 12 Page AM 10:41 1/26/06 11/05 Catalog LO/TO P-441 P-441LO/TOCatalog11/051/26/0610:41AMPage13 auatrrMdlCasfcto oe eieNumber Device Poles Classification Model Manufacturer -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService Breaker recommendationchartisforreferenceonly. Securityoffitshouldbeverified. qaeDFL10ApFae134-0 44-785 44-785 44-809 44-809 44-809 1-3 1-3 44-785 44-785 44-823 100AmpFrame 100AmpFrame 44-785 44-809 44-809 3 44-785 FDA34040 2-3 44-809 FHL 3 44-809 FH 44-809 1-3 100AmpFrame 1-3 100AmpFrame 44-783 1-3 FDA 100AmpFrame 2-3 44-809 100AmpFrame FCL FC 1 FAL 44-809 FA Square D 1-3 EZ 44-786 Square D 44-809 1-3 44-807 EJB Square D 44-809 Square D 1-3 3 EHB Square D Square D EHB Square D Square D EH4 Square D EGB 44-823 Square D 3 EDB 44-823 44-823 NX 44-823 Square D SolStTrip CktBkr 44-823 3 3 3 SolStTripSquare D CktBkr SND6 3 44-783 44-823 SolStTrip CktBkr SMD6 Square D 44-823 2-3 3 SHMD6 44-810 3 SolStTripSquare D CktBkr 1 Simplex SolStTrip CktBkr 44-783 SCND6 Siemens ITE 2-3 SCMD6 Siemens ITE RXD6 44-810 Siemens ITE RD6 1 44-783 QPPH Siemens ITE 2-4 Siemens ITE 44-810 Siemens ITE QPPH Siemens ITE 1 44-809 QPP 1 Siemens ITE 44-783 QPP 2-3 44-810 Siemens ITE QPH 44-785 1 Siemens ITE 44-809 44-785 QPH 2-3 44-785 Siemens ITE 44-809 QP1 44-809 2-3 Siemens ITE QP 44-823 2-3 44-823 3 3 Siemens ITE 44-823 QP 44-823 2-3 Siemens ITE 2-3 QJH2 44-823 44-823 44-807 Siemens ITE 44-823 2-3 2-3 QJ2-H 2-3 QJ2 Siemens ITE 44-807 PXD6 PD6 Siemens ITE 44-807 2-3 44-807 NXD6 3 ND6 Siemens ITE 2-3 MXD6-ETI Siemens ITE MXD6 MD6 Siemens ITE LL3 Siemens ITE Siemens ITE Siemens ITE JXD6-A Siemens ITE Siemens ITE JXD2-A JL3 Siemens ITE Siemens ITE Siemens ITE Siemens ITE Siemens ITE DA IDEAL IDEAL OCleat LO 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-809 44-764 44-764 44-809 44-764 44-764 44-809 44-764 44-764 44-764 44-809 44-764 44-764 44-764 44-823 44-823 auatrrMdlCasfcto oe eieNumber Device Poles Classification Model Manufacturer qaeDQ-HQ 44-768 1 QO 44-783 QO-VH 2-3 44-809 44-768 DINRailMountQO 2-3 44-810 1 QOUw/tie DINRailMountQO 2-3 DINRailMountQO QOU 44-768 QOU 44-809 QO Square D 2 44-783 2 44-809 Square D 2-3 2 44-810 MainCircuit QO-SWN QO 44-768 Square D 1 MainCircuit 2 QO QOM2-VH Square D QOM1-VH 44-810 QO-H 44-768 QO 2-3 QO QOB-VH Square D 1 Square D QOB-VH 44-810 QO 44-768 QOB-H QO 2-3 Square D 1 Square D Square D 44-786 QOB 44-786 QO QOB QO 44-807 Square D 44-785 44-807 44-785 2-3 Square D 2-3 44-785 44-809 44-785 400AmpFrame 44-809 QO 400AmpFrame 2-3 44-809 2-3 44-786 QO 44-809 44-823 2-3 250AmpFrame Q4L Square D 250AmpFrame 2-3 Q4 44-807 Square D 250AmpFrame 3 44-809 250AmpFrame 44-823 Q2MT 3 2-3 Q2L 44-809 2-3 44-823 Q2H 250AmpFrame Q2 2-3 Square D 44-786 3 44-823 44-786 Square D 250AmpFrame 3 Q1L Square D 44-807 44-786 44-786 44-807 Square D Q1B 2-3 Square D 44-807 44-807 Square D ML-3 1000AmpFrame 2-3 44-786 Square D 3 ML-1 Square D MHL 1000AmpFrame MH 44-807 44-786 Square D MAL 2-3 44-785 MA 44-807 MA Square D 44-786 2-3 44-809 Square D 44-785 44-785 44-785 400AmpFrame LHP Square D 44-807 3 Square D 44-809 44-809 2-3 44-809 LHL Square D 44-785 44-807 44-785 2-3 2-3 LH 400AmpFrame Square D 2-3 44-809 Square D 250AmpFrame 44-809 44-785 250AmpFrame LAL Square D 2-3 2-3 LA 44-785 44-809 KIL 250AmpFrame Square D 44-785 2-3 KI 44-809 44-785 KHL 250AmpFrame Square D 44-809 44-785 3 KH Square D 44-785 2-3 44-809 KCL 44-809 KC 250AmpFrame Square D 1 44-809 MagGard KAP 44-785 Square D 3 3 100AmpFrame KAL Square D KA 44-809 Square D 100AmpFrame 100AmpFrame GJL Square D 3 FY Square D FIL Square D 100AmpFrame FI Square D Square D FHL-DC Square D Square D Square D Square D Square D Square D Square D Wire Management rae O44-764 44-764 Breaker QO Breaker QO DA IDEAL IDEAL OCleat LO 44-764 44-764 44-768 44-764 44-768 44-809 44-768 44-809 44-764 44-768 44-809 44-764 44-768 44-809 44-764 44-764 44-823 44-823 44-823 13

Circuit Breaker Reference Guide 44-764 44-764 44-809 44-764 44-764 44-764 44-809 44-764 44-809 44-764 44-809 44-764 44-809 44-764 44-809 44-764 44-809 44-764 44-809 44-764 44-764 44-764 44-809 44-764 44-764 44-764 44-764 44-764 44-764 LO Cleat IDEAL IDEAL WestinghouseWestinghouseWestinghouseWestinghouseWestinghouse HKD HLA HLB HMC 44-807 HMCP 3 44-807 44-807 44-807 44-809 44-785 WestinghouseWestinghouseWestinghouse HNCWestinghouse HQNPWestinghouseWestinghouse HQPWestinghouseWestinghouseWestinghouse JAWestinghouse JDWestinghouse KAWestinghouse KBWestinghouse 3 LAWestinghouse 44-823 44-809 LBWestinghouse 1 LBB LHWestinghouse 44-810 MAWestinghouse MC MCC 2-4Westinghouse MCPO 3 44-807 44-807 44-807 NBWestinghouse 3 44-807 P 44-786 3 44-807 QBHWWestinghouse 44-807 44-807 2-3 44-786 Westinghouse 2-3 44-807 44-807 2-3 44-807 QC 3 44-807 44-786 Westinghouse 44-809 44-786 44-786 QC QCHQ 44-785 Westinghouse 3 1 44-823 44-809 Quicklag C QHCW 44-810 Westinghouse 3 1 QHCXWestinghouse 44-783 44-810 1 QHPWWestinghouse 44-810 1Westinghouse QPHW 44-810 Westinghouse Quicklag PWestinghouse 1 44-810 RE 1Zinsco 44-810 RHZinsco WPHX 1Zinsco 44-810 Zinsco 44-809 HQBZinsco QB 1 3 1 44-809 44-809 QCB 44-807 44-810 Q Type T Type 3 44-809 2 1 44-783 44-809 1 44-809 Manufacturer Model Classification Poles Device Number 44-809 44-768 44-764 44-764 44-764 44-764 44-809 44-764 44-783 44-764 44-809 44-764 44-809 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-764 44-809 44-764 44-809 44-764 44-764 44-764 44-764 LO Cleat IDEAL IDEAL www.idealindustries.com for Customer Service 1-800-435-0705 14 Square D QO-VH QO 2-3 44-810 Square DSquare DSylvania GTESylvania GTEThomas & Betts QYUWestinghouse QC Y1 C Type Rail Mount DIN F FrameWestinghouse 1 44-768 BAWestinghouse BAWestinghouse 2 2 1-3 44-783 44-807 BAB 44-783 Westinghouse 44-809 Westinghouse BR 1WestinghouseWestinghouse 44-810 Westinghouse 2-3 BRWestinghouse 44-809 BRHWestinghouse 1 CA DAWestinghouse 44-810 DK EB 1WestinghouseWestinghouse 44-810 ED 44-809 2-3Westinghouse EH 44-783 2-3Westinghouse 44-783 EHB EHDWestinghouse 44-809 1-3 FA 44-807 Westinghouse 44-785 44-807 44-809 FBWestinghouse 44-785 1-3 FDWestinghouseWestinghouse 44-809 1-3 FDB 1-3 44-809Westinghouse 44-809 FDC 44-785 Westinghouse 3 FP 44-809 2-3 GBWestinghouseWestinghouse 44-809 For Fire Protection 44-785 GBH 1-4 3 44-809 44-785 2-4 GHBWestinghouse 44-807 44-809 2-4 GR 44-786 HBAW 44-809 Westinghouse 1-3Westinghouse HBAX 44-809 1-3Westinghouse 44-809 1-3 HCA 44-809 HFB 3 1 44-807 44-810 HFD 1 44-810 3 44-809 1-3 44-809 44-785 1-4 44-809 44-785 Breaker recommendation chart is for reference only. Security of fit should be verified. Breaker recommendation chart is for reference only. Manufacturer Model Classification Poles Device Number Circuit Breaker Reference Guide P-441 LO/TO Catalog 11/05 1/26/06 10:41 AM Page 14 Page AM 10:41 1/26/06 11/05 Catalog LO/TO P-441 P-441LO/TOCatalog11/051/26/0610:41AMPage15 Lockouts for Standard, Straight Lever Breakers through hole D andotherbreakers withalever Lockouts for Square are packagedinquantitiesofone. *Components canbeordered separately bythecatalognumberlisted.They -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService ■ ■ ■ Circuit Breaker Lockout Systems ihu nerlLcsWith Integral Locks Without Integral Locks i 475Icue:Qy Cat.No. Qty. Kit 44-765Includes: ecito:Qy Cat.No. Qty. Description: ecito Cat.No. 1 2 lockingcableswithintegrallock* Square DNQO 4 in.MountingRail Starter KitPanelLockSystem–IntegralLocksSquareD Description High density, self-adhesivepanelspacing gasket, 3/8in.x115ft. i 471Icue:Qy Cat.No. Qty. Kit 44-761Includes: ecito Cat.No. 1 2 120/277V LockingCableswithIntegralLock* 4 in.MountingRail Starter KitPanelLockSystem–IntegralLocksStandard Description clearances) (panel spacinggasketmaybeneededonpaneldoorsw/tight Panel door can closeon1/16”, vinylcoated,galvanizedcable Recommend rail mountedonoutsideofpaneltopermitclosure Use yourownpadlocks 1 44-766 44-769 44-765 44-750 44-762 44-769 44-761 ■ ■ ■ ■ ■ National ElectricCode. motor circuits andcontrollers in Comply with ■ ■ i 477Icue:Qy Cat.No. Qty. Kit 44-767Includes: i 473Icue:Qy Cat.No. Qty. Kit 44-763Includes: ecito Cat.No. 1 integral lock* lockingcableswithout Square DNQO 4 in.MountingRail Starter KitPanelLockSystemwithoutIntegralLocksSquareD Description ecito Cat.No. 1 2 120/277V LockingCableswithoutIntegralLock* 4 in.MountingRail Starter KitPanelLockSystemwithoutIntegralLocksStandard Description NQO SeriesPanels NQO Locks singleandmultiplepolebreakers. Kits availablefor clearances to beclosedduringlockout. Optional Panel SpacingGasketenablespaneldoorswithtight out applications. Lockout systemsallowthepaneldoortobeshutduringlock- at thepointofneed. in orjustoutsideofanelectricalpanel,puttingalllockoutitems Adhesive backedrails allow systemtobepermanentlyinstalled during lockout Locks are smallenoughtoallowthepaneldoorbeclosed Cables comewithmasterlockbasetofitcablekey Wire Management h E “DisconnectingMeans”standard for motor, the NEW tnad120-277 Volt Panels standard article 430.102B ofthe2002 article 430.102B 2 and 44-769 44-767 44-768 44-764 44-769 44-763 SQ D 15

Circuit Breaker Panel System Breaker Number IDEAL Q2Q4 2-3 2-3 44-784 44-784 C6 1,3 44-779 Q1L 2-3Q4L 44-784 2-3 44-784 Q2L 2-3 44-784 C60 1-4 44-779 Q2H 2-3 44-784 C60L 2-3 44-779 C80A 3 44-784 or 44-787 C60HC60N 1-4 1-4 44-779 44-779 Q2MT 2-3 44-784 0193504302019800646901980 2 2 3 3 4 44-787 44-780 44-787 44-780 44-787 5SQ125SQ135SQ16 2 3 4 44-787 44-787 44-787 C45AD 3 44-779 NC100N 1-4 44-784 AC22 BS5419 2 44-783 BSEN60947-3 2 44-783 Pins Out Wide – #44-784Pins Out Wide Bar – #44-787 Tie Siemans 17USiemans B32Siemans Big Sgl Throw 5SQ11Siemans C10Siemans C32Siemans C70 3VF3Siemans L20A 5SX21Square D 1 5SX1 5SX1-2 3 5SX13 5SN2-2 1 44-784 1 Q1B 2Sursum 3Wylex 44-809 2 44-784 2-3 44-784 44-787 44-787 44-787 EA53 WRS40/2 44-784 3 2 44-780 44-779 Merlin Gerin+B83Proteus B100A C16 2 44-784 or 44-787 1 44-779 LemagMerlin Gerin C32N SD62 1-4 1 44-779 44-809 HagerKapp LS68Legrand 1 MW620A 01908 44-780 4 1 44-779 44-779 Manufacturer Model of Poles Lockout Device Breaker Number IDEAL V 1-3 44-780 C16 4 44-779 SGD 2-3 44-779 S222S253 1 3 44-779 44-779 WMF 1-3 44-779 SGL1SGL4SGL6 2-3 2-3 2-3 44-779 44-779 44-779 WMS 1-4 44-779 SGLASGP5 2-3 44-779 44-779 WMHWMN 1-4 1-4 44-779 44-779 SGH1SGH4SGH6 3 2-3 2-3 44-779 44-779 44-779 WMM 1-4 44-779 2 Pole3 Pole 2 3 44-780 44-780 V-Line 1-4 44-780 453717 3 44-779 4CB320 3 44-779 Series ESeries E 3 4 44-780 44-780 Series G 3 44-780 911220G 2 44-779 S272, S253 1 44-779 S251, S261, S263 1 44-779 www.idealindustries.com for Customer Service 1-800-435-0705 Easy to install push button action – requires no tools – requires push button action Easy to install required locks are Xenoy Lightweight the style that fits your application for See user guide below 16 Pins Out – #44-779 In – #44-780 Pins GE Vynckier 16AGE Vynckier C16, 16AHager Series E Series E 1 MW216A 2 2 44-780 44-780 44-779 GE Vynckier Series G 1 44-780 General Electric SGP4 2-3 44-779 ManufacturerABB ModelAEGAllen-BradleyBuschmat of PolesClipsal F374Cutler-Hammer Lockout Device 1492-CB1, 2, 3 E82S 1 1,2,3 S46 4CB116 WME 2 44-779 44-779 1General Electric 1 1-3 44-779 44-779 1 Pole 44-779 44-779 1 44-780 FAZ C16 1 44-779 E-T-A 911225 1 44-780 ■ ■ ■ Miniature Circuit Breaker Lockouts for European-Style Breakers European-Style for Lockouts Breaker Circuit Miniature

Miniture Circuit Breaker/Guide P-441 LO/TO Catalog 11/05 1/26/06 10:41 AM Page 16 Page AM 10:41 1/26/06 11/05 Catalog LO/TO P-441 P-441LO/TOCatalog11/051/26/0610:41AMPage17 av ie(n)SakeLnt aeilCat.No. Material Shackle Length Valve Size(In.) Ball Valve Lockout Devices ■ ■ ■ ■ Universal BallValve Lockout -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService ■ ■ ■ ■ -/ o3 —Polypropylene Nylon Heavysteel Polypropylene — 9/32 9/32 — 1-1/4 to3(notshown) 1/4 to1(notshown) 1-1/4 to3 1/2 to1-1/4 ecito Cat.No. Description Large UniversalBallValve Lockoutw/1-5/8in.x1-1/4handle Small UniversalBallValve Lockoutw/1in.x3/4handle out ballvalves Best availablemethodfor locking Complies with OSHA lockoutstandard Complies withOSHA Designed tolockinoffpositiononly Patented design fitsmostmajorbrand ballvalves Nylon andstainless steelconstruction Locks valves inon,offorthrottled position Accommodates handlesizesto1-1/14 in.thickx1-5/8wide valves ofvarying sizesandgeometries Designed tolockoutquarterturn Max. 44-771 44-770 44-821 44-820 44-847 44-846 Pneumatic Lockout ■ ■ ■ ■ ■ Gate Valve Lockouts ■ ■ ■ ■ ■ ecito Cat.No. Description Pneumatic Lockout av ieQy/k.Cat.No. Qty./Pkg. Valve Size n o1 n 1 1 1 1 — 1 Set offivesizes(1in.to13in.) 8 in.to13 6 in.to10 4 in.to6-1/2 2 in.to5 1 in.to3 Accepts 1/4 in.or9/32padlockshackles Accommodates most1/4 in.,3/8in.and1/2fittings Fits C,DandEcouplers compressed air Isolates equipmentfrom Durable plasticconstruction tions (temperature range -5 withstand che Tough, lightweight,dielectricXenoy thermoplastic bodies the responsible person,thenerased for thenextjob Spanish)thatcan (English, French & Complete withhigh-visibilityper Up tofour locks workers canapplytheirpersonalsafety spaceinstoragesize tosave Each sizerotates intoitselfandnestswithinthenextlarger installation inconfinedspaceapplications Unique patentpendingrotating designallowsfor easier Wire Management micals; perform effectively inextreme condi- 0°F (-46°C) to +350°F (177°C) to+350°F (-46°C) 0°F manent safety labels manent safety be writtenon to identify 44-774 44-818 44-828 44-827 44-826 44-825 44-824 17

Fluid Power Lockout Devices 44-815 44-816 44-813 44-772 44-789 44-782 44-8002 Our patent pending Our patent Switch universal Wall both locks out Lockout wall toggle and decora switches universal design The switch is locked assures hinges It also on or off. unobstructed open for normal switch operation wall switch standard The lockout fits most wall- mounted single or three- way electrical switches Highly visible fuse blockouts snap into blade-type fuse blocks to prevent installation of fuses snaps lockout Fuse easily into place and can be cable tied for added security Fit most Buss and Gould fuse blocks Cannot be removed without Cannot be removed key on any 2- or 3-prong Works plug Slides over cord prongs and prongs cord Slides over cord locks in place to prevent from being plugged into an out- let Universal Wall Switch Lockout Switch Universal Wall Lockout (not shown) Switch Standard Wall 1 1 Description Qty./CardNo. Cat. Electric Plug Lockout (keyed alike – key 8002) 13/32 in. Fuse Lockout 3 Electric Plug Lockout 1/4, 9/32 and 9/16 in. Fuse Lockout13/16 in., 1-1/6 in. and Blade Fuse Lockout 3 3 Description Cat. No. Description Qty./Card Cat. No. ■ ■ ■ ■ ■ ■ Fuse Blockout and Lockout Devices Blockout and Lockout Fuse Wall Switch Lockouts Switch Wall ■ ■ ■ Electric Plug Lockout 44-818 44-819 44-808 44-829 44-781 ® points ough the the through through www.idealindustries.com for Customer Service 1-800-435-0705 Durable plastic body resists Durable chemicals and job-site wear, abuse Accommodates cable ties or padlocks (with up to 3/8 in. shackles) Accommodate a variety of electrical plug and cord accidental sizes to prevent connection or disconnection 44-781 (not shown), Red Impact 44-781 modified nylon body with 6 ft., 1/8 in. galvanized steel cable 44-829 Unique hasp lockout 44-829 device accepts up to six 9/32 in. padlocks and comes with a 6 ft. plastic-coated steel cable Complete with high-visibility, re-usable,safety write-on labels Complete with high-visibility, &(English, French person, then Spanish). Identify the responsible the next job. for erase Tough, lightweight, dielectric Xenoy Tough, thermoplastic body withstands in effectively chemicals; performs conditions extreme workers can apply their personal safety locks Up to four Feed the cable end Feed 6 ft. flexible multi-stranded Tough, dia. steel cable is insulated with 1/4” a clear vinyl coating Infinitely adjustable safetyInfinitely adjustable and hasp cable panels breaker multiple circuit Ideal for lockouts valve and side-by-side gate backto be locked out, then thr lockout body. Cinch it tight to remove it tight to remove Cinch lockout body. locking any slack with the patented feature 18 Plug Lockouts – 220/550V 3-1/4 in. x 3-1/4 in. x 7 in. Plug Lockouts – 110V 2 in. x 2 in. x 3-1/2 in. Adjustable Cable Lockout Description Size Cat. No. Description Cat. No. Cable Lockout, 6 ft. cable Cable Lockout System (not shown), 6 ft. cable Description Cat. No. ■ ■ ■ Plug Lockouts ■ ■ ■ ■ ■ ■ ■ ■ ■ Cable Lockouts Cable Lockouts Adjustable Cable Lockout Adjustable

Misc Lockout Devices P-441 LO/TO Catalog 11/05 1/26/06 10:41 AM Page 18 Page AM 10:41 1/26/06 11/05 Catalog LO/TO P-441 P-441LO/TOCatalog11/051/26/0611:16AMPage19 Steel Padlocks Aluminum Safety Lockout Padlocks uprClrCt o Cat.No. Cat.No. Bumper Color ■ ■ ■ ■ ■ ■ ■ ■ -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService Yellow Green Red White Black Blue Cat.No. Yellow Red Black Blue Bumper Color locks availablebyspecialorder Keyed-alike andMaster-Keyed shackle diameter 1-1/2 in.widelockwith9/32 Includes twokeys environmental hazards shackle withstandsabuseand Rustproofed, steelcasewithnickel-plated Hardened shackles for superiorresistance tocutting Rekeyable bodiesfor easykeysystemmaintenance Ideal for corrosive andtoughenvironments High visibility, baked-onpowdercoatedfinishstaysbright / n hcl laac 2In.ShackleClearance 3/4 In.ShackleClearance 49044-911 44-909 44-907 44-905 44-903 44-901 44-910 44-908 44-906 44-904 44-902 44-900 44-923 44-922 44-921 44-920 Marking Pens Lockout Padlocks Xenoy Safety Lock Labels ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ecito Cat.No. Description ecito Cat.No. Description Cat.No. Bumper Color Marking Penw/redink Marking Penw/blackink Lock Labels Yellow Red Black Blue red orblack Color-coded in marker plates and write-oncable-tie Use onwrite-onmarkercards will notsmear Fast-drying, permanentink Keyed alikeandMaster-Keyed locksavailablebyspecialorder Four colorsfor easyidentification 1-1/2 in.widelockwith1/4 in.shackle 1-1/2 in.shackleclearance Non-conductive, lightweightXenoy locks confusion withother lockout devicereduces Dedicated safety Polyester over laminateprotects label Write-on, vinyllabelswithpeel-offadhesive backing Easy identificationofemployees’ locks Wire Management ® body 41-698 41-697 44-898 44-918 44-916 44-914 44-912 19

Safety Padlocks 44-841 44-790 44-791 44-800 44-801 Spanish/English tags safety and extra provide in bilingual information situations High-visibility lettering plastic tags with Laminated legends resist non-fade and harsh corrosive conditions environmental in. tag with 7/8 Write-on can be padlocked grommet to device to help prevent unauthorized removal Allow up to six workers to lock out a single energy source energy Allow up to six workers to lock out a single plated and vinyl-coated Rustproofed, anodized aluminum alloy construction hasps feature Labeled durability long-term for labels accept pens, pencils “Do Not Operate” Permanent and permanent markers Do Not Operate (striped) 5 Legend Qty./Card Cat. No. 1-1/2 in. 2 1 in.Do Not Operate Do Not Operate Blue Red 3 1 1 Jaw DiameterNo. Legend Color Qty./Card Qty./Card Cat. Cat. No. ■ ■ ■ ■ Bilingual Lockouts and Tags and Lockouts Bilingual ■ ■ ■ ■ Safety Lockout Hasps Labeled Safety Lockout Hasps Safety Lockout Hasps Lockout Safety 44-843 44-833 44-849 44-835 44-834 44-830 44-848 44-831 44-844 44-832 44-1833 44-1830 44-804 Heavy-Duty Laminated Card of 5 Heavy-Duty Laminated Card of 5 Economy VinylHeavy-Duty Laminated Bag of 25 Card of 5 Heavy-Duty Laminated Box of 100 Economy Vinyl Bag of 25 Heavy-Duty Laminated Card of 5 Economy VinylHeavy-Duty Laminated Bag of 25 Card of 5 www.idealindustries.com for Customer Service 1-800-435-0705 Vinyl tags are silk screened with a metal grommet; red tie fas- red with a metal grommet; silk screened tags are Vinyl tener included Exceeds OSHA’s 50-lb. requirement pullout High-visibility lettering corrosive legends, resist non-fade plastic tags have Laminated in. grommet conditions and a 7/8 and harsh environmental Heavy-duty steel construction resists Heavy-duty steel construction resists unauthorized entry and job-site abuse in. x 3-1/2 in. x 6 in. design Compact 8-3/4 Helps ensure maximum security for maximum security for Helps ensure complex work team situations individuals to Allows up to 13 personally lock the closed box 20 (Photo ID - Self Sealant) (red striped background) Do Not Operate – Lockout Steps Required Do Not Operate Electricians at Work Do Not Operate – Electricians at Work Do Not Operate – (red striped background) Do Not Operate – (red striped background) Do Not Operate Do Not OperateDo Not OperateMaintenance Department Do Not Operate – Maintenance Department Laminated Heavy-Duty Box of 100 Do Not Operate – Vinyl Economy Bag of 25 Do Not OperateDo Not Operate – Laminated Heavy-Duty Card of 5 Group Lock Box Legend Type Qty. Cat.No. Description Cat. No. Heavy-Duty Lockout Tags Lockout Heavy-Duty ■ ■ ■ ■ ■ ■ ■ ■ Group Lock Box Lock Group

Heavy Duty Tags and Hasps P-441 LO/TO Catalog 11/05 1/26/06 11:16 AM Page 20 Page AM 11:16 1/26/06 11/05 Catalog LO/TO P-441 P-441LO/TOCatalog11/051/26/0611:16AMPage21 -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService E r ls,WrigFbrls 0i.x1 n 1 1 Cat. 5 5 10in.x14 5 5 7in.x10 Qty./Bag 4in.x6 Fiberglass 5in.x7 No. 5in.x7 Self-StickingPolyester 3-1/2in.x5 Self-StickingPolyester Self-StickingPolyester Size Warning Self-StickingPolyester ArcFlash, NEC Self-StickingPolyester Warning ArcFlash, NEC NEC ArcFlash,Danger NEC ArcFlash,Danger ArcFlash,Warning NEC Warning ArcFlash, NEC Description Type to qualifiedpersonsbefore examination,adjustment,servicingormaintenanceoftheequipment. shall befieldmarkedtowarnqualifiedpersonsofpotentialelectricarc flashhazards. The markingshallbelocatedsoasto centers, National ElectricCode110.16 FlashProtection: Flash Protection Labels andSigns Adhesion: 45oz./in.widthultimate Temperature Range:-40°Fto180°F(-40°C82°C) Specifications: ■ ■ ■ ■ ■ ■ 2-1/4 in.x1/2eachw/5/16type 18 markerspercard Small: 1-1/8 in.x4-1/2eachw/3/4type 4 markerspercard Medium: 2-1/4 in.x9eachw/1-3/4type 1 markerpercard Large: Voltage andConduitMarkers high visibility Non-smear, blacklegendonbrightorange background for Resist abrasion, moisture, dirtandoil durability Vinyl-impregnated clothconstructionprovides long-lasting High-adhesion properties witheasyremovability Non-conductive for usersafety pipe andfuseboxes Identify junctionboxes, switches,circuit breakers, raceways, in otherthandwellingoccupancies,thatare likelytorequire examination,adjustment,servicingormaintenancewhileenergize Required Labels– 44-892/44-893 Switchboards, panelboards,industrialcontrolpanels,andmotor Arc FlashLabels 44-894/44-895 eedCt o a.N.Cat.No. Cat.No. Cat.No. Legend THREE PHASE SINGLE PHASE VOLTAGE HIGH DANGER 13,800V 4,160V 2,400V 600V 480V 460V 440V 380V 277V 240V 230V 220V 208V 120V 110V 277/480V 120/208V Wire Management Recommended Signs– 4324-9 44-442 N/A 44-440 N/A 44-392 N/A 44-390 N/A 44-342 N/A N/A 44-340 N/A N/A 44-292 N/A 44-289 44-417 N/A 44-328 44-414 44-322 44-367 44-413 44-321 44-364 44-412 44-317 44-363 44-411 44-314 44-362 44-410 44-313 44-361 44-408 44-312 44-360 44-407 44-311 44-358 44-406 44-310 44-357 44-405 44-308 44-356 44-403 44-307 44-355 44-401 44-306 44-353 44-300 44-305 44-351 44-297 44-303 44-299 44-301 44-296 44-298 44-295 ag eimSmall Medium Large 44-896/44-897 be clearlyvisible 44-897 44-896 44-895 44-894 44-893 44-892 d, 21

Arc Flash, Voltage, Conduit Markers 44-890 44-891 44-862 44-863 44-880 44-881 44-865 44-882 Magnetic 5 x 7 Danger Breakers Locked Out – Danger Breakers Locked Out Danger Equipment Being Serviced MagneticDo Not Operate 5 x 7 Legend Material Size (In.) Cat. No. Magnetic Danger Signs Magnetic Danger 44-877 44-885 44-884 44-878 44-887 7 x 10 3-1/2 x 10 2-1/4 x 4-1/2 polyester polyester polyester Fiberglass 20 x 14 Self-sticking Self-sticking Self-sticking www.idealindustries.com for Customer Service 1-800-435-0705 Resistant to both chemicals & graphics — protected abrasion indoor & outdoor use for Resistant to both chemicals and abrasion — protected graphics for indoor and outdoor use indoor for graphics — protected abrasion both chemicals and Resistant to 22 Danger – High Voltage – Keep OutDanger – High Voltage – Keep OutDanger – High Voltage Spanish – Danger High Voltage Self-Sticking Polyester Fiberglass Self-Sticking Polyester 7 x 10 10 x 14 7 x 10 Danger – High VoltageDanger – High Voltage Self-Sticking Polyester Fiberglass 7 x 10 10 x 14 Danger High Voltage – Bilingual – Danger High Voltage Fiberglass 20 x 14 OSHA Regulation Lockout Safety Center Acrylic 6H x 9W x 4D Lock Out Before Servicing Notice in Accordance with OSHA Regulation – Bilingual OSHA Legend Material Size (In.) Cat. No. Legend Material Size (In.) Cat. No. OSHA Signs Regulation ■ Danger Signs Lockout Signs Lockout ■

Safety and Facility Signs P-441 LO/TO Catalog 11/05 1/26/06 11:16 AM Page 22 Page AM 11:16 1/26/06 11/05 Catalog LO/TO P-441 P-441LO/TOCatalog11/051/26/0611:17AMPage23 -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService ■ ■ ■ ■ Detectable Underground Tapes ■ ■ ■ Non-Detectable Underground Tapes eedClrSz a.No. Cat. Size Color Value Legend Method Property 6 in.Tape Line Below Caution BuriedElectric Line Below Caution BuriedElectric Line Below Caution BuriedFiberOptic Line Below Caution BuriedTelephone Line Below 2,750PSI Caution BuriedElectric Line Below 500% 100%virginLDPE Caution BuriedElectric 4.0Mils Line Below Caution BuriedElectric ASTMD882 IDEALSpecs. ASTMD882-75B ASTMD2103 3 in.Tape Recommended BurialDepth Tensile Strength Composition Elongation Thickness eedClrSz a.No. Cat. Size Color Legend rpryMto Value Method Property Optic CableBelow Caution BuriedFiber Electric LineBelow Caution Buried Electric LineBelow Caution Buried esl teghATD8 35lbs./in.(15,000 PSI) ASTMD882 Tensile Strength opsto DA pc.Top layervirginPET 80% 5.0Mils IDEALSpecs. ASTMD882-75B ASTMD2103 Composition Elongation Thickness Association (APWA) colorcode Association (APWA) American Public Works standards includingthe Meets orexceedsindustry of underground utilityinstallations protection, locationandidentification Solid aluminumfoil core tapesfor Lead-free pigmentsandorganic lead-free ink Formulated toresist degradation from acidandalkalifound insoils Lead-free pigmentsandorganic from acidand alkalifound insoils Formulated toresist degradation of underground utilityinstallations For protection, locationandidentification – – less than12in. 4 in.to6 rne6in.x1,000ft. Orange e 6in.x1,000ft. 3in.x1,000ft. Red Red rne3in.x1,000ft. 3in.x1,000ft. Orange Orange elw6in.x1,000ft. Yellow 3in.x1,000ft. Yellow e 6in.x1,000ft. Red 3in.x250ft. 3in.x1,000ft. Red Red Bottom layervirginPE Foil industry standard Foil industry 42-151 42-104 42-103 42-131 42-101 42-152 42-102 42-252 42-251 42-201 Barricade TapesBarricade ■ ■ eedClrSz hcns a.No. Cat. Thickness Size Color Legend rpryMto Value Method Property eedClrSz hcns a.No. Cat. Thickness Size Color Legend agr e n ,0 t 2.0Mils 3in.x1,000ft. Red 2.0Mils 2.0Mils 3in.x1,000ft. 2.0Mils 3in.x250ft. Yellow 3in.x1,000ft. Yellow Yellow Danger Caution DoNotEnter Caution Caution opsto DA pc.100%virginLDPE ASTMD882 IDEALSpecs. ASTMD88-75B Tensile Strength Composition Elongation agrRd3i.x100f.4.0Mils 3in.x1,000ft. Red 4.0Mils 4.0Mils 3in.x1,000ft. 277V/480V KeepOut 4.0Mils 3in.x1,000ft. Yellow Danger HighVoltage 3in.x1,000ft. Yellow Danger Yellow Caution HighVoltage Caution DoNotEnter Caution physical hazards specificationsSection1010.144Meets OSHA for marking with boldblackletters yellowHigh-visibility safety orred polyethylene construction Wire Management e n ,0 t 4.0Mils 3in.x1,000ft. Red 1,893 PSIMD 2,350 PSITD ≥ 400% 42-015 42-012 42-011 42-031 42-051 42-003 42-002 42-001 42-052 23

Barricade/Underground Tapes IT2I-C IT3I-C IT4I-C IT2I-M IT2I-M IT2M-C IT1M-C IT2I-C0 IT3I-C0 IT4I-C0 IT2M-M IT1M-M ** ** IT2M-C0 IT1M-C0 IT2I-C30 IT1_5I-C IT1M-M0 IT2M-M0 IT1_5I-M IT1_5M-C IT1_5I-C0 IT1_5I-M0 IT1_5M-C0 IT1_5M-C30 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 1000 1000 1000 1000 1000 1000 1000 1000 MS3367-4-9 MS3367-4-0 MS3367-5-9 MS3367-5-0 MS53367-5-9 MS53367-5-0 exposure to outdoor elements exposure to high temperatures exposure Natural General Purpose 6/6 Nylon Purpose General Natural most applications - Suitable for - Meets UL flammability ratings 94V-2 - 85°C/185°F working temperature UV 6/6 Black Nylon with continuous or extended most applications - Suitable for (UV) ultraviolet light endure able to grade, resistant - Weather - Meets UL flammability ratings 94V-2 - 85°C/185°F working temperature 6/6 Heat Stabilized Black Nylon - most applications with continuous or extended Suitable for - Meets UL electrical applications for standards - Meets UL flammability ratings 94V-2 - 125°C/254°Fworking temperature Eases initial insertion alignment Eases initial costs installation Lowers ■ ■ ■ ■ ■ Material Selection Angled Tail 8.1 in./206mm .094 in./2.39mm .042 in./1.06mm 1/16 - 2-3/16 18 lbs. 4.0 in./102mm .094 in./2.39mm .042 in./1.06mm - 7/8 1/16 18 lbs. 5.7 in./145mm .140 in./3.56mm .049 in./1.24mm 1/16 - 1-7/16 40 lbs. 11.5 in./292mm .142 in./3.60mm .055 in./1.40mm 1/16 - 3-3/8 40 lbs. 14.5 in./368mm .142 in./3.60mm .055 in./1.40mm 1/16 - 4 40 lbs. www.idealindustries.com for Customer Service 1-800-435-0705 Tapered tail grip assures positive threading positive tail grip assures Tapered easier grabbing Stepped tail allows for and tightening once engaged Reduces installation fatigue added safety Smooth corners provide Rounded edges eliminate insulation damage Exceeds industry tensile strength ratings strength Exceeds industry tensile initial friction thin tip reduces Tapered with the highest ten- force insertion Lowest sile strength One-piece design for added strength design for One-piece Superior locking mechanism 24 Natural Nylon Natural Nylon UV Black Nylon Natural Nylon UV Black NylonNatural Nylon Natural Nylon UV 6.1 in./154mm Black Nylon .094 in./2.39mmUV Black Nylon .042 in./1.06mm*IM, 1_5M & 2M Series 1/16 - 1-1/2 18 lbs. 100 Natural Nylon UV Black Nylon UV Black Nylon UV Black Nylon Natural Nylon Natural Nylon UV Black NylonUV Black Nylon Heat Stabilized Black Nylon Natural Nylon 8.8 in./224mmin./3.56mm .140 Natural Nylon UV .049 in./1.24mm Black Nylon 1/16 - 2-3/8 40 lbs. Natural Nylon Natural Nylon UV Black Nylon *1_5 & 2I Series Description Length Width Thickness Max Bundle Strength Tensile Mil-Spec Reference Qty./Bag Cat. No. Description Length Width Thickness Max Bundle Strength Tensile Mil-Spec Reference Qty./Bag Cat. No. ■ ■ Stepped Tail Gripper Stepped Tail Miniature (18 lb.) Natural & lb.) Natural (18 Miniature UV Black ■ ■ ■ ■ ■ ■ ■ ■ Powr-Tie™ Intermediate (40 & lb.) Natural UV Black No Burrs or Sharp Edges No Burrs or Sharp Quality Construction Low Insertion Force

Cable Ties P-441 LO/TO Catalog 11/05 1/26/06 11:17 AM Page 24 Page AM 11:17 1/26/06 11/05 Catalog LO/TO P-441 P-441LO/TOCatalog11/051/26/0611:17AMPage25 -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService ih ev-uy ev-uy&EtaHayDt aua,U lc HeatStabilizedBlack Black& Extra Heavy-DutyNatural, UV Light Heavy-Duty, Heavy-Duty& tnad(0l. aua,U lc HeatStabilizedBlack Black& UV lb.)Natural, Standard (50 ecito eghWdhTikesMxBnl esl teghMlSe eeec t.BgCat.No. Qty./Bag Mil-SpecReference Tensile Strength MaxBundle Thickness Width Length Description Cat.No. Qty./Bag Mil-SpecReference Tensile Strength MaxBundle Thickness Width Length Description VBakNln75i.10m.7 n/.2m.5 n/.4m11 -/ 50lbs. 1/16-1-7/8 .053in./1.34mm .178in./4.52mm 7.5in./190mm BlackNylon UV BlackNylon UV Natural Nylon Natural Nylon *4LH, 7H,10H,11H,14HSeries BlackNylon UV Natural Nylon BlackNylon UV BlackNylon UV BlackNylon UV BlackNylon UV BlackNylon UV BlackNylon UV BlackNylon UV Natural Nylon BlackNylon UV Natural Nylon 50lbs. 1/16-4-1/8 ListedNylon6/6cabletiesaresuitableforuseinairhandlingspacesaccordancewithSection300-22(C)&(D)oftheNat UL .053in./1.34mm *2S, 3S&4SSeries .178in./4.52mm UV BlackNylon 14.5in./368mm Natural Nylon 50lbs. Heat StabilizedBlackNylon 1/16-3-1/16 BlackNylon UV .053in./1.34mm BlackNylon UV .178in./4.52mm Natural Nylon 11.2in./284mm Natural Nylon Heat StabilizedBlackNylon BlackNylon UV BlackNylon UV Natural Nylon Natural Nylon Heat StabilizedBlackNylon ryNln 78i.11m 30i.86m 00i.22m /-41215ls S371- 50 MS3367-16-8 175lbs. 3/8-14-1/2 .090in./2.29mm .340in./8.64mm 47.8in./1214mm Gray Nylon Natural Nylon Natural Nylon Natural Nylon Natural Nylon Natural Nylon Natural Nylon 28i.59m.0i.1.m 00i.20m /66250lbs. 3/16-6 .080in./2.03mm .50in./12.7mm 175lbs. 22.8 in./579mm 3/16-11 175lbs. .090in./2.29mm 3/16-9-3/4 .340in./8.64mm 175 lbs. 37.1 in./942mm .090in./2.29mm 120lbs. 3/16-7-3/16 .340in./8.64mm 33.1 in./841mm .090in./2.29mm 120lbs. 3/16-8 .340in./8.64mm 25.3 in./642mm .075in./1.90mm 3/16-7 120lbs. .300in./7.62mm 28.0 in./711mm .075in./1.90mm 3/16-5-1/4 .300in./7.62mm 120 lbs. 24.2 in./614mm .075in./1.90mm 3/16-4-1/16 .300in./7.62mm 17.8 in./451mm .075in./1.90mm .300in./7.62mm 15.1 in./384mm 50lbs. 1/16-4-3/4 .053in./1.34mm .190in./4.82mm 17.0 in./432mm Wire Management ional ElectricalCode. S371- 50 MS3367-16-0 S371- 50 50 MS3367-13-0 50 MS3367-12-0 MS3367-10-0 S371- 50 50 MS3367-16-9 50 MS3367-13-9 50 MS3367-12-9 MS3367-10-9 MS3367-1-0 MS3367-1-9 S373950 MS3367-3-9 MS3367-2-0 MS3367-2-9 MS3367-7-0 MS3367-7-9 S373050 MS3367-3-0 1000 1000 100 100 100 100 100 500 100 500 100 100 500 100 500 100 100 100 100 50 50 50 50 50 50 IT6EH-C0 IT4S-C30 IT3S-C30 IT2S-C30 IT14H-L0 IT4LH-L0 IT8LH-L0 IT7LH-L0 IT5LH-L0 IT11H-L0 IT10H-L0 IT14H-L8 IT2S-M0 IT5S-CO IT6EH-C IT4S-D0 IT3S-D0 ** ** IT2S-C0 IT4S-C0 IT3S-C0 IT4LH-L IT5LH-L IT8LH-L IT7LH-L IT7H-L0 IT14H-L IT11H-L IT10H-L IT2S-M IT4S-D IT3S-D IT2S-C IT5S-C IT4S-C IT3S-C IT7H-L 25

Cable Ties 44-994 44-993 Shackless Lock and Hasp Lock Shackless ® Wire Management Wire Cylinder ® Ideal for vans, trucks, vans, Ideal for gates and vending attempts Defeats to pry and cut solid steel Hardened lock body withstands attacks forcible Complete with high security 6-pin Series Pro Hidden Shackle Solid Steel Padlock Solid Steel Hasp for use with 44-994 Description Cat. No. ■ ■ ■ ■ Pro-Series 44-990 44-991 44-992 www.idealindustries.com for Customer Service 1-800-435-0705 Application Flexibility – Interchangeable cables Interchangeable Application Flexibility – – Rekeyable cylinder Alike Convenience Keyed cable steel braided 100% Cut Resistance – 3/8 in. (10mm), aluminum lock body – Rust resistant Tough Weather and lock body bumper cable sleeve Resistant – Vinyl Scratch Infinite Locking Positions – The patented lock holds the cable – The Positions Infinite Locking 1 ft. (30cm) tight at any position from to 6 ft. (1.8m) 26 Master Lock Python Kit with 6 ft. Cable-keyed different Master Lock Python Kit with 6 ft. Cable-keyed alike 12 ft. (3.7m) x 3/8 in. (10mm) Cable for Python Lock Description Cat. No. ■ ■ ■ ■ ■ job sites, lawn mowers, Other Applications: Bikes, lawn furniture, truck cargo, pickup generators, canoes, boats, skis, snowboards, locks and much more. tire spare ■ Python™ Adjustble Locking Cable Locking Adjustble Python™ Python™ Locking Adjustable anything Cable secures It’s the within its grasp. only locking cable that is always the your right length for exclusive, application. This holds the patented product at any flexible steel cable tight infinite possibilities. position for

Pro-Series Master Locks P-441 LO/TO Catalog 11/05 1/26/06 11:17 AM Page 26 Page AM 11:17 1/26/06 11/05 Catalog LO/TO P-441 P-441 LO/TO Catalog 11/05 1/26/06 11:17 AM Page 27

Test and Measurement

Industrial Clamp Meters w/Exclusive TightSight™ Display

■ 600 and 1000 amp clamps for a variety of industrial and commercial environments ■ Unique TightSight™ bottom display makes hard-to-reach measurements convenient ■ New easy-to-read displays feature large numbers and green glowing backlight ■ CAT IV rating for maximum safety ■ Voltage-presence warning on all functions

Description Cat. No. 400AAC Clamp Meter w/NCV 61-732 400AAC Clamp Meter w/NCV, TRMS 61-736 600AAC Clamp Meter 61-764

600AAC Clamp Meter w/TRMS, Capacitance, Frequency, 61-766 40AAC Low Range 600AAC w/TRMS, DC Current 61-768 1000AAC w/TRMS 61-772 Clamp Meters/Circuit Tracers 1000AAC w/TRMS, DC Current, Capacitance 61-774

SureTest® Circuit Tracers

■ Numeric value and audibl signal provide quick and easy-to- understand tracing feedback ■ Receiver display rotates automatically for easy viewing ■ Identifies breakers and fuses ■ Pinpoints opens and shorts ■ Can be used on circuits 0-600V AC/DC

Description Cat. No. 61-954 SureTest® Circuit Tracer 61-954 61-956 SureTest® Circuit Tracer 61-956 SureTest® Open/Closed Circuit Tracer 61-958

61-958

1-800-435-0705 for Customer Service www.idealindustries.com 27 C-700 TL-102 61-702 61-704 1.0% 0.7% 0.7% 61-322 61-324 0.01% 0.01% Ω Includes Carrying case Silicone test leads Accessories Ω — 200.0 A 3.0% 200.0µ F 3.0% 200.0/200.0k 2000m/200.0/600 V 1.2% 2000m/200.0/1000 V 0.5% RANGE & RESOLUTION BASIC ACCURACY 60.00m/600.0m A 1.5% 1.5% 6.000M/60.00M 60.00µ/600.0µ/6.000m F 1.9% 1.9% 600.0/6.000k/60.00k/600.0k RANGE & RESOLUTION BASIC ACCURACY 600.0m6.000/60.00/600.0/750 V 0.9% 0.9% 600.0µ /6000µ/60.00m/600.0m A 1.0% 1.0% 600.0m/6.000/60.00/600.0/1000 V 0.5% 0.5% 6000/60.00k/600.0k/6.000M/60.00M Hz 200A current capability 200A current (40-600VAC) voltage Non-contact Capacitance battery indication Low on all ranges protection Overload lead storage Integral warning voltage Audible dangerous on all ranges Auto power off shape hourglass Ergonomic Compact clamp head limited warranty Lifetime FREQUENCY AC CURRENT RESISTANCE CAPACITANCE 700 Series SpecificationsAC VOLTAGE DC VOLTAGE 61-702 & 61-704 RESISTANCE CAPACITANCE FREQUENCY 320 Series Specifications AC VOLTAGE DC VOLTAGE AC CURRENT DC CURRENT 4-in-1 Test Tool — Vibration mode to verify AC voltage, Tool 4-in-1 Test data hold, max hold, Cat III-1000V rating harmonics indicator, RMS, backlight, vibration mode to verify — True Tool 4-in-1 Test max hold, Cat III-1000V rating AC voltage, harmonics indicator, Description Cat. No. ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 700 Series 4-in-1 Test Tool 4-in-1 Test Series 700 61-322 61-324 1.0% 61-096 Ω 750V 1.5% C-290 1000V 1.0% 200.0A 3.0% TL-100 61-334 61-904 61-905 2000 RANGE & RESOLUTION BASIC ACCURACY 320 Series Digital Multimeter ® 1.3-750 VAC 0.1-1000 VDC 1-2000 Ohms www.idealindustries.com for Customer Service 1-800-435-0705 Frequency Auto/manual ranging Min/max Data hold Auto power off Capacitance Audible continuity Data hold Ultimate safety tool combines the the simplicity of a tester with a clamp meter measuring capability of enables Open split-jaw configuration quick, in-and-out testing Measures 0.1-200 AAC* Automatically tests voltage, current, current, tests voltage, Automatically continuity without and resistance a dial need for 28 Smart-Meter SpecificationsAC VOLTAGE DC VOLTAGE AC CURRENT 61-096 RESISTANCE Digital Multimeter – True RMS Digital Multimeter – True Digital Multimeter – True RMS, backlight, data acquisition, Digital Multimeter – True software and RS-232 interface RS-232 cable Includes Premium test leads w/alligator clips Optional Carrying case Current clamp adapter ProVision™ software Description Cat. No. Split Jaw™ Smart-Meter Description Cat. No. ■ ■ ■ ■ ■ ■ Accessories ■ ■ 1/0 Cu cable opening allows up to (max diameter 0.5” or 27mm) *Jaw Recommended accessory: C-90 Carrying Case ■ ■ ■ Split Jaw™ Smart-Meter Split Jaw™ ■ PlatinumPro

Voltage Testers P-441 LO/TO Catalog 11/05 1/26/06 11:17 AM Page 28 Page AM 11:17 1/26/06 11/05 Catalog LO/TO P-441 P-441LO/TOCatalog11/051/26/0611:17AMPage29 -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService MEGGER ■ ■ Insulation Testers ■ ■ ■ ■ ■ ■ ■ ■ ■ Vol-Con Vol-Con ecito Cat.No. Description TEST VOLTAGE CONTINUITY pcfctos61-791 RESISTANCE INSULATION Specifications Insulation Tester 300V, case includescarrying protective rubberboot,continuity, indication,CatIII- lowbattery with analogarc,autodischarge,poweroff,ranging, test inhibition>25V, defaultvoltmeterto600VAC/DC,digitaldisplay MEGGER Nylon carrying case Nylon carrying Replacement leads Vol-Con Vol-Con breakdowns ininsulation and motorwindingsfor Checks existinginstallations for proper insulation Checks newinstallations CAT III –1000VCAT III Integral lead storage (40-600VAC) Non-contact voltage indication ghost voltages Low impedancetoeliminate Replaceable siliconetestleads Audible continuity Tests voltage for from DC 6-220VDC Tests for ACvoltage from 24-600VAC Digital circuitry for accurate measurements ® is aregisteredtrademarkofMegger, Inc. ® ® ® ® ecito Cat.No. Description Elite w/vibrationmode Elite Digital InsulationTester —250/500/1000Vtestvoltages, ® Elite Voltage/Continuity Tester AG EOUINACCURACY RESOLUTION RANGE & 0.01-100 250/500/ 999M 1000 V Ω Ω TL-102 61-092 61-090 C-90 3.0% 3.0% 5.0% 61-791 ■ ■ ■ ■ ■ ■ ■ ■ ■ Vol-Con ■ ■ ■ ■ ■ ■ ■ ■ Continuity Tester Vol-Con ecito Cat.No. Description e t&Measurement Test & Padded nyloncase Resistor fusedleads* Vol-Test voltage indication,testsfrom6-600VAC/DC Vol-Con *Special, current-limiting resistor in each lead acts as a fuse to open in a short-circuit situation. short-circuit a in open to fuse a as acts lead each in resistor current-limiting *Special, ecito Cat.No. Description Padded nyloncase Resistor-fused leads* Vol-Con *Special, current-limiting resistor in each lead acts as a fuse to to fuse a as acts lead each in resistor current-limiting *Special, open in a short-circuit situation. short-circuit a in open 5-year warranty -600V CAT III Compact size safety Dual voltage indicationfor backup indicator andneon Bright, long-life LED’s tips Replaceable leadswithshieldedprobe Tests voltage for AC/DC Vibrates whenvoltage ispresent Extremely rugged andreliable tester 5-year warranty Dual voltage indicationfor backupsafety with shieldedprobe tips Replaceable plug-inleads indicator lamp andneon Bright, longlife LED’s continuity tester Patented, automatic switching AC/DC 5-600V Tests for ACvoltage from Vibrates whenvoltage ispresent three-in-one tester Extremely ruggedandreliable ® ® ® Lvoltagetester–Tests from80-600VAC/DC XL XL voltage/continuitytester–Audiblecontinuity, audible w/standard leads ® ® L&Vol-Test & XL Voltage/ Accessories Premium leathercase Standard leathercase Padded nyloncase Resistor-fused leads Optional Standard testleads Includes ® XL 61-085 61-086 TL-82 61-072 61-076 C-90 C-90 29 61-020 61-010 TL-82 TL-80 C-90

Voltage Testers 61-063 61-061 61-534 61-051 Plus ® hot and ground hot and ground 3-wire, 125VAC circuits 125VAC 3-wire, Plus Plus GFCI ® ® Plus GFCI Circuit Tester ® Description Cat. No. ® Tests GFCI for receptacles Tests operation proper wiring, open correct for Tests polarity, reverse ground, open hot, open neutral, hot and ground hot on neutral, with open reversed interruption infault design maximizes comfort No-slip ergonomic readings false neon lamps prevent Premium case impact-resistant Tough, warranty 5-year Checks proper wiring Checks proper sequence and GFCI operation and audible indicators Visual warranty 5-year Microprocessor Microprocessor sensitivity controlled level identifies Positively and breakers circuit fuses without service interruption Tests for voltage from from voltage for Tests 40V to 600V AC Audible and visual indication breaks Locates insulated along live wires energized for Tests circuits Automatic Circuit Identifier with E-Z Check E-Z Check Powr-Glo™ Audible Powr-Glo™ Volt Sensor™ – Over-molded cushion grip, Cat III-600V cushion grip, Sensor™ – Over-molded Volt CAT III rating applies to 61-063 only. Description Cat. No. Description Cat. No. Vol-Con ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ E-Z Check Tester Circuit Automatic Circuit Identifier with Circuit Automatic E-Z Check Non-Contact Voltage Tester Voltage Non-Contact 61-179 61-182 61-175 61-176 61-183 61-521 61-165 61-164 Ground continuity adapter Isolated ground adapter Includes Carrying case 1 ft. extension cord Optional Extension cord w/alligator clips Accessories Circuit Analyzers Circuit ® www.idealindustries.com for Customer Service 1-800-435-0705 Circuit Analyzer — Tests AFCI for proper operation Circuit Analyzer — Tests Circuit Analyzer — Standard model ® ® Checks for open Checks for phases to 600V use up For Meets IEC-1010 (EN61010) safety requirements warranty 5-year Includes carrying case Identifies three-phase Identifies three-phase sequence Indicates motor rotation Verifies isolated Verifies 61-176 (with grounds adapter) Identifies proper wiring in wiring Identifies proper receptacles 3-wire (bootleg) Identifies false grounds GFCIs proper for Tests displays trip operation time and amperage Line voltage Line voltage Peak Frequency voltage Ground-neutral impedance Ground conductor Hot and neutral impedances True RMS True under drop voltage Measures 15 and 20-amp load 12, 30 3-Phase/Motor Rotation Tester Description Cat. No. SureTest SureTest Description Cat. No. ■ ■ ■ ■ ■ ■ Rotation Tester 3-Phase/Motor ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ SureTest ■ ■

Voltage Testers P-441 LO/TO Catalog 11/05 1/26/06 11:17 AM Page 30 Page AM 11:17 1/26/06 11/05 Catalog LO/TO P-441 P-441LO/TOCatalog11/051/26/0611:17AMPage31 Wire Strippers Reflex™ Premium T ■ ■ ■ ■ -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService Wire Strippers Kinetic™ Super ■ ■ ■ ■ ■ ■ ecito ieRneCat.No. WireRange Description Cat.No. WireRange Description Kinetic Super Reflex™ PremiumT Kinetic Super Kinetic Super Kinetic Super Reflex™ Premium12/2NMCableT Reflex™ Premium14/2NMCableT Reflex™ PremiumT Reflex™ PremiumT Reflex™ PremiumT Reflex™ PremiumT Reflex™ PremiumT Textured, no-slipsleeves for asure, easygrip Sleeves that extendtostrippingheadcushionthumbandfingers Curved handles toreduce wristfatigue Ergonomic design for maximumcomfort “Shear-Cut™” boltcutters accurate Thumb andfingervalley makes strippingeasierandmore Slide lockfor andstorage safety Plier nosefor holdingandtwistingwires New ergonomic designfor maximumcontrol Non-slip Santoprene™ textured grips ™ ™ ™ ™ ieSrpe 8-16AWG Stranded 22-30AWG Solid 16-26AWG Stranded 10-18AWG Solid Wire Stripper Wire Stripper Wire Stripper Wire Stripper ® ® ® ® ® ® Cte — 8-16AWG stranded -Cutter 22-30AWG 0.5mm solid 16-26AWG stranded 10-18AWG solid -Stripper –Metric -Stripper -Stripper -Stripper -Stripper ® ® Srpe — — -Stripper -Stripper ® -Stripper 2 -4.0mm 2 45-425-341 45-718 45-717 45-716 45-715 45-449 45-448 45-423 45-418 45-417 45-416 45-415 Wire Strippers Reflex™ SuperT Wire Strippers Kinetic™ Reflex ■ ■ ■ ■ ■ ■ ■ ■ ■ ecito ieRneCat.No. WireRange Description Reflex™ SuperT w/static dissipativegrips Reflex™ SuperT w/static dissipativegrips Reflex™ SuperT NM CableT Reflex™ Super12/2&14/2 Reflex™ SuperT Kinetic™ Reflex™T ecito ieRneCat.No. WireRange Kinetic™ Reflex™T Description Sleeves that extendtostrippingheadcushionthumbandfingers Textured sleeves withextra cushioningfor addedcomfort Curved handles toreduce wristfatigue Ergonomic design for maximumcomfort Locking pawlfor storage safe 6/32 and8/32self-chasingscrew-cutting holes Strips 6-14 stranded solid&8-16 wire AWG AWG New ergonomic designfor maximumcontrol Non-slip Santoprene™ textured grips ® -Stripper ® ® ® ® Srpe 8-16AWG stranded 8-16AWG solid -Stripper -Stripper -Stripper -Stripper ® ® Srpe ieSrpe 12-20AWG Stranded 10-18AWG Solid -Stripper WireStripper -Stripper WireStripper o l Totes Tools & ® ® T -Stripper ® -Stripper 16-26 AWG stranded 12-2 and14-2solid 22-30 AWG solid 45-617 45-616 45-621 45-618 45-615 45-918 45-915 31

Wire Strippers potential otective ch conductors or handling equip- electrical pr Molded on insulation provides permanent bonding make contact with su parts of the body to be protected and parts of the body to be protected Employees working in areas where there are are there where working in areas Employees When working near exposed energized conductors or working near exposed energized When shall be provided with, and shall use, with, shall be provided each employee shall use insulated tools shall each employee insulated screwdrivers and nutdrivers are individually tested are and nutdrivers insulated screwdrivers Ergonomic cushioned grips provide 40% more torque than torque 40% more provide cushioned grips Ergonomic when wearing gloves handles, even conventional and super hardened with black oxide blades finished Tempered maximum quality for less spin-out fit for secure tips provide ground Precision Meets OSHA insulated tools (29 CFR for requirement 1910) minutes to ensure no current leakage or sparkover occurs. leakage or sparkover no current minutes to ensure impact. no damage from ensure the grip is firmly bonded to the tool. to ensure insulating material. Hardened chrome vanadium tool steel • 3 for 24 hours, then tested under current for immersed in water are Tools • 168 hours at -40° for being stored After C (-40° to dropped F), tools are • 168 hours at +70° for stored After being C (158° F), a tensile load is applied • no flammability of the seconds to ensure 10 subjected to flame for are Tools Screwdrivers IDEAL and VDE AC (1500V certified to 1000V DC). Each one is designed and tested to meet ASTM F1505-01, EN, DIN, IEC and 60 900 test standards. ■ ■ ■ ■ subjected to live current. current. subjected to live REGULATIONS REGULATIONS Testing: when no failure insulated tool we sell is individually tested to ensure 1000V Every • UL and VDE Certification: to pass certification: in order some of the tests we perform below are Listed • ment if the tools or handling equipment might or parts. OSHA 1910.335 (a)(1)(i) OSHA Regulations: OSHA 1910.335(a)(2)(i) parts, circuit electrical hazards equipment that is appropriate for the specific for equipment that is appropriate the work to be performed. for and using IDEAL in compliance by providing are you insulated Make sure tools! - handles High carbon tool steel for precision durability ® Non-slip guard for added safety ollowing warn High visibility ergonomic handles for maximum comfort and control esult if the f provide a sure grip and are resistant oil and to perspiration, water, chemicals Textured Santoprene Textured gripping surface handles with a soft, easy-to-grip outer surface. In addition to the ergonomic qualities found qualities addition to the ergonomic In easy-to-grip outer surface. handles with a soft, ® Serrated jaws provide secure and durability are laser hardened for greater strength Cutting jaws and edges Whenever possible, always de-energize lines and equipment possible, always de-energize Whenever insulated tools them. 1000V prior to working on or around insulated tool line creates a perfect blend of safety, comfort and precision functionality. Each tool features tool features Each functionality. and precision comfort safety, blend of a perfect tool line creates insulated www.idealindustries.com for Customer Service 1-800-435-0705 e not heeded: Meets OSHA insulated tools (29 CFR for 1910) requirements First ULavailable tested and classified insulated tools AC, 1500V certified (1000V DC) Volt 1000 Meets ASTM F1505-01 and IEC 60 900 standards Permanently bonded, double insulated handles for added safety 32 when doing electrical work. standards for insulated tools. for standards object when either might contact an energized source. object when either might contact an energized protection. damaged in any way. Destroy all dual-layer tools if the inner yellow layer tools if the inner yellow all dual-layer Destroy damaged in any way. outer layer. the orange shows through operty damage, personal injury or death may r r ■ Pliers ■ ■ ■ Insulated Tools Insulated IDEAL The double insulated Santoprene in our tools, the insulated coating process acts as an ‘at-a-glance’ safety check. If the orange outer coating reveals any of any outer coating reveals safety the orange check. If an ‘at-a-glance’ acts as coating process in our tools, the insulated this tool needs to be replaced. an electrician will know that surface, the inner yellow • Always follow OSHA 1910 S and NFPA 70E safety requirements safety OSHA S and NFPA 70E follow Always 1910 • • Do not touch the uninsulated portion of an insulated tool or any conductive • insulating properties. proper must be kept clean and dry for • Tools use. • Always inspect insulated tools before eye clothing and approved by wearing protective Use additional protection • the task. specifically designed for • Always use tools that are F1505-01 tools meet UL ASTM and IECThese • 22PP, 60900 ings ar • or becomes breaks tool if the insulation cracks, Do not use any insulated are designed only to reduce the chance of injury where the tool may make the chance of injury where designed only to reduce are should only circuits energized around Work source. contact with an energized be done when absolutely necessary by qualified technicians. and only P

Insulated Tools P-441 LO/TO Catalog 11/05 1/26/06 11:17 AM Page 32 Page AM 11:17 1/26/06 11/05 Catalog LO/TO P-441 P-441LO/TOCatalog11/051/26/0611:17AMPage33 25-Piece JourneymanInsulatedKit–35-9302 25-Piece JourneymanKit -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService nlds Cat.No. Includes: 1/2 in.HexNutdriver 7/16 in.HexNutdriver 3/8 in.HexNutdriver 5/16 in.HexNutdriver 1/4 in.HexNutdriver 3/16 in.HexNutdriver #3 PhillipsTip Screwdriver #2 PhillipsTip Screwdriver #1 PhillipsTip Screwdriver 3/8 in.x8Screwdriver 5/16 in.x6Screwdriver 1/4 in.x6Screwdriver 3/16 in.x5Screwdriver 1/8 in.x3Screwdriver 9-3/4 in.Multi-CrimpTool 9-1/2 in.High-LeverageCableCutter 10 in.Tongue andGroovePliers 8-1/2 in.Long-NosePliers 8 in.DiagonalCuttingPliersw/angledhead 9-1/2 in.SideCuttingLinesmanPliers Wire StripperCutter Reflex™ SuperT Heavy-Duty SoftTool Case Fuse Puller VoltSensor™ Knife ® -Stripper 45-9615 35-9335 35-9334 35-9333 35-9332 35-9331 35-9330 35-9312 35-9311 35-9310 35-9325 35-9324 35-9323 35-9321 35-9320 30-9429 35-9052 35-9430 35-9038 35-9029 30-9430 45-9120 35-9352 35-9340 34-002 61-063 9-Piece BasicKit Insulated Screwdrivers nlds Cat.No. Includes: 9-Piece BasicInsulatedKit–35-9300 Heavy-Duty SoftTool Case Fuse Puller #2 PhillipsTip Screwdriver 1/4 in.x6Screwdriver 3/16 in.x5Screwdriver 9-1/2 in.High-LeverageCableCutter 8-1/2 in.Long-NosePliers 8 in.DiagonalCuttingPliersw/angledhead 9-1/2 in.SideCuttingLinesmanPliers Reflex™ SuperT ecito Cat.No. Description cedie i Cat.No. Screwdriver Kit 3/8 in.x8SlottedScrewdriver 5/16 in.x7SlottedScrewdriver 1/4 in.x6SlottedScrewdriver 7/32 in.x7SlottedScrewdriver 3/16 in.x5SlottedScrewdriver 1/8 in.x4SlottedScrewdriver #3 x6in.PhillipsScrewdriver #2 x4in.PhillipsScrewdriver #1 x3in.PhillipsScrewdriver (Includes all9screwdriverslistedabove.) 9-Piece InsulatedScrewdriverKit ® -Stripper Tools andTotes 45-9615 35-9350 35-9311 35-9323 35-9321 35-9052 35-9038 35-9029 30-9430 35-9325 35-9324 35-9323 35-9322 35-9321 35-9320 35-9312 35-9311 35-9310 35-9303 34-002 33

Insulated Tools 30-9340 35-9350 35-9351 35-9352 35-9353 35-9353 30-9430 35-9029 35-9038 35-9052 35-9429 35-9430 35-9120 35-9615 successfully passed UL certification! -Stripper ® -Stripper ® 22PP Our pliers are the first to have Insulated Tools Recognized as the undisputed leader in product safety and certification, UL has developed rigorous safety standards for 1000V insulated tools. In order to carry the UL listing mark, tools must be tested by UL to meet these standards. Only tools that carry mark have passed this stringent certification the UL Listed process. Why accept anything else? Hard Case for Nutdriver Kit (35-9304) Insulated Electrician’s Knife Insulated Electrician’s Roll Case for Basic Kit (35-9300) Tool Roll Case for Standard Kit (35-9301) Tool Roll Case for Journeyman Kit (35-9302) Tool Hard Case for Screwdriver Kit (35-9303) 9-1/4 in. Side Cutting Linesman Pliers 9-1/4 in. Side Cutting Linesman w/angled head 8 in. Diagonal Cutting Pliers 8-1/2 in. Long-Nose Pliers 9-1/2 in. High-Leverage Cable Cutter 9-3/4 in. Multi-Crimp Tool and Groove Pliers 10 in. Tongue Premium T DescriptionDescription Cat. No. Cat. No. Description Cat. No. Reflex™ Super T Cases Insulated Knife Insulated Pliers Insulated 35-9304 61-063 34-002 35-9330 35-9331 35-9332 35-9333 35-9334 35-9335 35-9336 35-9323 35-9324 35-9325 35-9310 35-9311 35-9312 35-9351 30-9430 35-9029 35-9038 35-9430 35-9052 35-9320 35-9321 45-9615 -Stripper ® www.idealindustries.com for Customer Service 1-800-435-0705 34 Includes all 7 Nutdrivers listed above.) ( 7-Piece Insulated Nutdriver Kit Nutdriver Kit Cat. No. 1/2 in. Hex Nutdriver 3/16 in. Hex Nutdriver 1/4 in. Hex Nutdriver 5/16 in. Hex Nutdriver 3/8 in. Hex Nutdriver 7/16 in. Hex Nutdriver 9/16 in. Hex Nutdriver Heavy-Duty Soft Tool Case Heavy-Duty Soft Tool VoltSensor™ Fuse Puller 1/4 in. x 6 in. Screwdriver 5/16 in. x 6 in. Screwdriver 3/8 in. x 8 in. Screwdriver Screwdriver #1 Phillips Tip Screwdriver #2 Phillips Tip Screwdriver #3 Phillips Tip 8-1/2 in. Long-Nose Pliers and Groove Pliers 10 in. Tongue 9-1/2 in. High-Leverage Cable Cutter 1/8 in. x 3 in. Screwdriver 3/16 in. x 5 in. Screwdriver Reflex™ Super T 9-1/4 in. Side Cutting Linesman Pliers 8 in. Diagonal Cutting Pliers w/angled head Description Cat. No. 17-Piece Standard Insulated Kit – 35-9301 17-Piece Standard Insulated Includes: Cat. No. Insulated Nutdrivers 17-Piece Standard Kit Standard 17-Piece

Insulated Tools P-441 LO/TO Catalog 11/05 1/26/06 11:17 AM Page 34 Page AM 11:17 1/26/06 11/05 Catalog LO/TO P-441 P-441LO/TOCatalog11/051/26/0611:17AMPage35 Screwdriver/Nutdriver 5-in-1 Non-Conductive Safe-T-Grip -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ecito Cat.No. Description ecito Cat.No. Description 2-1/2 in.dia.fuses;11-3/4long Large Pullerfor31to600A/250V&400A/600V, 3/4in.to fuses; 7-1/2in.long Medium Pullerfor0to100A/250V&600V, 1/2in.to1dia. Small Pullerfor250V, 9/32in.to1/2dia.fuses;5long #2 PhillipsReplacementBit #1 PhillipsReplacementBit 3/16 in.SlottedReplacementBit 1/4 in.SlottedReplacementBit 5-in-1 Non-ConductiveScrewdriver/Nutdriver Handle willstore upto8standard bits Powerful magnet securely holdsbitsinplace Accommodates moststandard 1/4 in.hexbits and 1/4 in.nutdriver Contains: 1/4 in.slotted,3/16 in.slotted,#1Phillips,#2Phillips (IEC900) 60900 EN and F1505-94 rated perASTM DC 1000V AC, 1500V Exceed MIL specifications Exceed MIL Clearly markedamperage ranges Notched handlesprovide no-slipgrip safe, polypropylene construction Fully insulated,high-dielectric, glass-filled Three sizeshandlefusesranging from 0to600A replacing cartridge-type fuses andconvenience forMaximum efficiency removing or ® Fuse Pullers LA-4128 LA-4127 LA-4126 LA-4125 35-9905 34-003 34-002 34-001 Fuse Puller andTest Light Fuse Pullers ■ ■ ■ ■ ■ ■ ■ ■ ecito Cat.No. Description ecito Cat.No. Description n i.fss 7-1/4in.long 1 in.dia.fuses; Large Pullerfor0to100A/250V&O60A/600V, 9/16in.to 5 in.long Small Pullerfor0to30A/250V, 1/4in.to1/2dia.fuses; 30 in.Leadw/insulatedclip 30 in.Leadw/testprod Fuse Puller&Test Lightonly Test capacityfrom AC/DC 100V to600V For and60A/600V useonfusesto100A/250V For 9/16 in.to1fuses Built-in resistors limitcurrent flowtoeliminatefalse indication Test prods fitparallel andtandemslotreceptacles checks electricalconnections Convenient pullscartridgefusesand pocket-sized toolsafety added safety No-slip grippingsurface andprotective fingerstopsfor Molded oftough,high-impactnylonfor greater strength Tools andTotes 34-016 34-015 34-014 34-013 34-012 35

Insulated Tools Tape 31-417 Replacement 31-06031-06131-064 31-150 31-062 31-152 31-063 31-155 31-065 31-160 31-542 31-162 31-544 31-165 31-552 31-554 Wire Installation Wire Provide positive grip positive Provide on lubricated cable fit Comfortable Non-slip handle and fingertip grooves provide secure grip for grip secure provide Non-slip handle and fingertip grooves added handling comfort hands gloved handle opening accommodates large, Oversized better winding control stability for handle increases Large handle withstands rugged job site conditions Durable grip positive provides case surface Textured plastic case Impact-resistant Fiberglass tape w/leader – 50 ft. Fiberglass tape w/leader – 100 ft. Fiberglass tape w/leader – 200 ft. Fiberglass tape w/eyelet – 50 ft. Fiberglass tape w/eyelet – 100 ft. Fiberglass tape w/eyelet – 200 ft. Nylon Monofilament w/eyelet – 50 ft. Nylon Monofilament w/eyelet – 100 ft. Gloves Rubber-Coated Description Cat. No. ■ ■ ■ ■ ■ ■ ■ ■ Cable Gripping Gloves Tuff-Grip™ Fish Tapes Tuff-Grip™ Description Cat. No. Cat. No. — Tape Replacement 31-18731-18631-207 31-150 31-190 31-152 31-189 31-155 31-208 31-160 31-220 31-162 31-165 Fish Tapes ® www.idealindustries.com for Customer Service 1-800-435-0705 with these products, or any other hand or power tool. Tape with EyeletTape with Leader Tape Funneled tape opening reduces kinking and tape breakage tape opening reduces Funneled right- or left-handed rewinds hinged knob for Reversible, durability extra Stationary handle for grip positive provides case surface Textured plastic case Impact-resistant Inner rotating reel with winding knob retrieves tape faster than tape faster with winding knob retrieves reel Inner rotating labor savings increased fish tapes for traditional 36 Fiberglass tape w/eyelet – 200 ft. Fiberglass tape w/leader – 50 ft. Fiberglass tape w/leader – 100 ft. Fiberglass tape w/leader – 200 ft. Fiberglass tape w/eyelet – 50 ft. Fiberglass tape w/eyelet – 100 ft. Replacement crank assembly (winder knob) ■ ■ ■ ■ ■ ■ WARNING: Do not use fishtape on live electrical circuits. Always wear eye protection Do not use fishtape on live electrical circuits. Always WARNING: Rapid-Pak Description Cat. No. Cat. No. Fish Tape and Gloves P-441 LO/TO Catalog 11/05 1/26/06 11:17 AM Page 36 Page AM 11:17 1/26/06 11/05 Catalog LO/TO P-441 IDEAL INDUSTRIES, INC. IDEAL INDUSTRIES offers a wide variety of products, Corporate Headquarters Becker Place Sycamore, IL 60178, USA training materials and seminars to help ph: 815-895-5181 • 800-435-0705 in USA fax: 815-895-9470 • 800-533-4483 in USA our customers stay compliant with email: [email protected] IDEAL INDUSTRIES, INC. Occupational Safety and Health International Division Becker Place Standards (OSHA) and the Sycamore, IL 60178, USA ph: 815-895-1278 National Electric Code (NEC). fax: 815-895-4800 email: [email protected] IDEAL INDUSTRIES (CANADA), CORP. 33 Fuller Road Occupational Safety and Health Ajax, Ontario L1S 2E1, Canada ph: 905-683-3400 • 800-527-9105 in Canada Standards (OSHA) fax: 905-683-0209 • 800-263-3115 in Canada email: [email protected] 1910.147 The Control of Hazardous Energy (Lockout/Tagout) IDEAL INDUSTRIES (AUST) PTY. LTD. This standard covers the servicing and maintenance of machines and equipment in Level 6 75-85 Elizabeth Street which the unexpected energization or start up of the machines or equipment, or Sydney NSW 2000 Australia release of stored energy could cause injury to employees. This standard establishes ph: 61300 765 800 • 61405 123 100 (mobile) fax: 61300 765 801 minimum performance requirements for the control of such hazardous energy. email: [email protected] More information can be found at www.osha.gov. IDEAL INDUSTRIES (UK) LIMITED 225 Europa Boulevard, Gemini Business Park Warrington, Cheshire, WA5 7TN, UK ph: +44-(0) 1925 444446 fax: +44-(0) 1925 445501 National Electric Code email: [email protected] Article 110.16 Flash Protection IDEAL INDUSTRIES GmbH Gutenbergstrasse 10 Switchboards, panelboards, industrial con- 85737 Ismaning, Germany trol panels and motor control centers that are in other than dwelling occupancies ph: +49-(0) 89 996860 fax: +49-(0) 89 99686111 and are likely to require examination, adjustment, servicing or maintenance while email: [email protected] energized, shall be field marked to warn qualified persons of potential electric arc IDEAL INDUSTRIES CHINA, LLC flash hazards. The marking shall be located so as to be clearly visible to qualified Unit 911, Tower W1, The Towers, Oriental Plaza No. 1 East Chang An Avenue, Dong Cheng District persons before examination, adjustment, servicing or maintenance of the equip- Beijing, 100738, China ment. ph: 86-10-8518-3141 • 86-10-8518-3142 fax: 86-10-8518-3143 email: [email protected] IDEAL INDUSTRIES BRASIL COMÉRCIO LTDA. National Electric Code Condomínio América Business Park Cj 201 Edifício Quebec Article 430.102 Disconnect Means Location Av. Marginal do Rio Pinheiros No. 5200 CEP 05693-000 São Paulo – Brasil (B) Motor Disconnect. A disconnecting means must be ph: 55-11-3759-8777 • 55-11-3759-8776 located in sight of the motor location and the driven fax: 55-11-3759-8775 email: [email protected] machinery location. The controller disconnecting means, IDEAL INDUSTRIES MEXICO, INC. in accordance with 430.102(A), can serve as the disconnect- Prol. Americas 1600 4to. Piso ing means for the motor, if the controller disconnect is located Col. Country Club Guadalajara, Jal. 44610, Mexico in sight of the motor location and the driven machinery location. ph: 52-33-36789176 • 52-33-10688902 (mobile) fax: 52-33-36789290 Exception: The motor disconnecting means is not required to be in sight of the CUSTOMER SERVICE 800-435-0705 motor and the driven machinery location under either condition (a) or (b) below, pro- email: [email protected] vided the controller disconnecting means required in accordance with 430.102(A) is QUALITY HOTLINE 800-304-3578 capable of being individually locked in the open position. email: [email protected] The provision for locking or adding a lock to the disconnecting TECHNICAL HOTLINE 800-338-4495 means must be permanently installed on or at the switch or circuit email: [email protected] breaker used as the controller disconnecting means. (a) Where such a location of the disconnecting means is impracticable or introduces additional or increased hazards to persons or property. (b) In industrial installations, with written safety procedures, where conditions of maintenance and supervision ensure only qualified persons will service ® the equipment. www.idealindustries.com The way every job should be™

IDEAL INDUSTRIES, INC. Becker Place, Sycamore, IL 60178, USA / 815-895-5181 • 800-435-0705 in USA 33 Fuller Road, Ajax, Ontario L1S 2E1, Canada / 905-683-3400 • 800-527-9105 in Canada 225 Europa Boulevard, Warrington, Cheshire, WA5 7TN, UK / +44-(0) 1925 444446 Gutenbergstrasse 10, 85737 Ismaning, Germany / +49-(0) 89 996860 27 Keene Street, Baulkham Hills, NSW 2153, Australia / +61-(2) 96866923 www.idealindustries.com

Rev. 12/05 Printed in USA Form No. P-441