DOCSLIB.ORG

Gun Bluing Other Metal Objects

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Gun Bluing Other Metal Objects STEEL LETTERS & FIGURES Stamp Your Own Combination Of Numbers & Specs In Softer Steels & Metals “FIRST STEP” BLUING KIT Hand cut and taper-ground for making “factory perfect” impressions on custom rifle barrels and Gun Bluing other metal objects. Made from the finest quality steel, selected for its proven ability to withstand hard use, then heat-treated to three distinct hardnesses. The character end is hardened to Rc 62 to prevent chipping. Hammer end is crowned and hardened to prevent mushrooming, and the center WHY GUN BLUING? is hardened to transmit the hammer blow. Each stamp is individually inspected and marked with index on thumb side so you’ll always know which way the character is facing. Sets of letters consist of 27 characters, including period. Sets of figures consist of nine characters No other activity or line of work in a gun shop or from 0 to 8, the 6 also being used for the 9. Packed in sturdy wooden box with lid. ab sporting goods store teaches the mechanics of a gun 1 3 SPECS: Steel Stamps stocked in /16" (1.6mm) and /32" (2.4mm) sizes. The characters are cut into the end better than bluing. To reblue a gun, you have to com- 1 3 METAL WORK METAL of a steel bar measuring /4" (6.4mm) square x 2 /8" (6cm) long. Purchase as sets or by the individual piece. pletely dismantle it piece-by-piece, and each of the hun- STK# 1/16" STK# 3/32" CHARACTER STK# 1/16" STK# 3/32" CHARACTER STK# 1/16" STK# 3/32" CHARACTER dreds of varieties of guns has its own peculiarities. After you have handled so many guns, the whole theory of a #990-501-101AV #990-501-201AV A #990-501-114AV #990-501-214AV N #990-501-130AV #990-501-230AV #0 A Great Beginning … #990-501-102AV #990-501-202AV B #990-501-115AV #990-501-215AV O #990-501-131AV #990-501-231AV 1 gun’s mechanical operation becomes ingrained in your #990-501-103AV #990-501-203AV C #990-501-116AV #990-501-216AV P #990-501-132AV #990-501-232AV 2 mind, never to be lost. Further, continued handling of the When you’re ready to start hot bluing guns with Oxynate No. 7™, more popular guns soon leads the gunsmith to know, but not ready to “really” get the whole kit and kaboodle that comes #990-501-104AV #990-501-204AV D #990-501-117AV #990-501-217AV Q #990-501-133AV #990-501-233AV 3 in our Bluing System Kit, this is the Kit for you. #990-501-105AV #990-501-205AV E #990-501-118AV #990-501-218AV R #990-501-134AV #990-501-234AV 4 almost automatically and without looking, which parts This “First Step” Kit gives you enough equipment and supplies #990-501-106AV #990-501-206AV F #990-501-119AV #990-501-219AV S #990-501-135AV #990-501-235AV 5 are worn and need to be replaced. to “begin from”, at a price that you can afford to “begin with”. Every #990-501-107AV #990-501-207AV G #990-501-120AV #990-501-220AV T #990-501-136AV #990-501-236AV 6 & 9 There is also a money-making feature—not only is item was chosen to give you the basics, with the understanding that you would not get all the handy accessories, have to scrounge up #990-501-108AV #990-501-208AV H #990-501-121AV #990-501-221AV U #990-501-137AV #990-501-237AV 7 bluing fairly profitable, but it also gives the dealer or gun- some things at your end, and have to make your own tank stands. #990-501-109AV #990-501-209AV I #990-501-122AV #990-501-222AV V #990-501-138AV #990-501-238AV 8 smith an opportunity to become better acquainted with But, you would get the minimum number of tanks, the Oxynate No. #990-501-110AV #990-501-210AV J #990-501-123AV #990-501-223AV W #990-000-001AV #990-000-002AV & his shooting customers. Nothing pleases a gunnut more 7 Bluing Salts and other chemicals, plus all the safety gear that you #990-501-111AV #990-501-211AV K #990-501-124AV #990-501-224AV X #990-501-140AV #990-501-140AV Period than a gunsmith making his favorite gun look like new. absolutely must have to get started. And, our exclusive - and abso- #990-501-112AV #990-501-212AV L #990-501-125AV #990-501-225AV Y As a result, he is inclined to return to the gunsmith who lutely unique - step-by- step Bluing Instruction Book; 34 pages of the finest bluing information available in the entire industry, worked #990-501-113AV #990-501-213AV M #990-501-126AV #990-501-226AV Z worked such miracles—for bluing does seem to be magic out over years and years of experience with hot bluing, and the 1 #990-600-100AV /16" Figure Stamp Set, 9Z32L89 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 39.99 for the uninitiated. So as sights and scopes, slings and gun mainstay of thousands of gunshops’ bluing success. 3 cases are needed, the sportsman not only buys from the #990-600-200AV /32" Figure Stamp Set, 9Z30F79 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 36.99 If you still have trouble, our full-time Tech Support Staff can 1 man who did up his gun, he brings his friends along, too. help you out plus, there’s our uncompromising guarantee: You will #990-500-100AV /16" Letter Stamp Set, 9Z96P47 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 114.99 be satisfied - period. 3 #990-500-200AV /32" Letter Stamp Set, 9Z66D78� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 100.99 The original cost of setting up a bluing shop is A brief listing of the products included in the Kit follows. You’ll — Advise # — Single Letter or Figure Stamp, 9Z6Q09 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 7.99 not great, nor is it necessary to buy a lot of stuff. Bluing find full descriptions in the next few pages. Save money and time Steel Stamps are intended for softer steels, barrels, etc. DO NOT use on hardened or plated steels, knife blades, tough alloys. Misuse voids guarantee. tanks, burners, some bluing salts, cleaner, polish, some when you buy the “First Step” Kit. wheels—and you’re in business. From then on buy as you KIT INCLUDES ENGRAVING/STAMPING/JEWELING need. Don’t buy unless you do need. OXYNATE NO. 7 - (1) 40 lb. pail. So far as bluing salts are concerned, we make no 909TM CLEANER - (1) 8 lb. box of Dicro-Clean No. 909 caustic claim that our salts are superior to anyone else’s. We do granules OR (1) gallon of non-hazardous NH-909 liquid. have Bureau of Standards reports that prove some salts ENGINE TURNING BRUSHES claimed to be as good as ours simply aren’t. But let us BLACK IRON TANKS - (2) Won’t contaminate bath. For Cleaning Solution/Hot Water Rinse, and Bluing Solution. Produce Beautiful, Deep Patterns ENGINE TURNING BRUSH SET not kid anybody: there are lots of other bluing salts on With Minimal Trouble; Customer the market about as good as ours. We feel we are selling FIBERGLASS TANK - (1) Tough, rigid, gel-coated, fiberglass tank used for Cold Water Rinse. Recommended! bluing salts to gunsmiths who know their business, to BLUING TANK PIPE BURNER - (1) Provides correct heat for the Use for engine turning rather sporting goods dealers and shooters who are past the High Grade Brushes, Plus Two Ways To Control Brush Spread Bluing Solution. Both Natural and Propane Gas orifices. than abrasive tips. Brush wires follow the contours of rounded gun “sucker” stage. Why should we insult their minds with a parts better, and does a superb job on flat surfaces, with long tool Easy-to-fit, heat shrink tubing or roll-on O-rings squeeze en- bunch of hooey? HOT WATER TANK PIPE BURNER - (1) Smaller size for Cleaner/ life. Use Engine Turning Abrasive and Do-Drill as explained in the gine turning brush bristles together so they don’t spread out. Keeps Rinse Tank saves gas. Natural and Propane Gas orifices. listing elsewhere in this section. ab the “swirls” crisp and sharp, adding a new dimension to your jeweling The proof of any pudding is in the eating. We guar- 3 1 THERMOMETER - (1). SPECS: Brush diameter /16" (4.8mm), .005" diameter (.13mm) wire, /8" capabilities; increases brush life, too! ab antee you to be satisfied on a money-back basis. What 7 3 1 (3.2mm) shaft. 1 /8" (4.4cm) overall. SPECS: Set includes: (6) /16" (4.8mm) dia. brushes; (12) /4" (6.3mm) dia. more should be said? BROWNELLS BLUING INSTRUCTIONS - Explicit, concise, cov- O-rings; (1) 4" (10cm) length of heat shrink tubing. #080-558-003AV 3 Engine Turning Brushes, 8K8N11� � � � $ 9.99 So, on to business. The quality of a good blue job ering every phase of bluing. Including Trouble-Shooting. METAL FINISHING METAL #080-558-000AV E/T Brush Set, 8K19B20 � � � � � � � � � � � � �$ 23.99 ENGINE TURNING BRUSH HOLDER - depends entirely on the gunsmith doing the bluing, not WATER DISPLACING OIL - (1) Gallon. Spring-loaded plunger assembly with on the salts. If you have a gunsmith who will do a mas- BLUING PARTS BASKET - (1). just the right amount of “give” keeps brush bristle pressure constant terful piece of polishing, with all surfaces true and bright, to produce consistent, accurate “swirls.” Fits in drill press chuck. BLACK IRON SCREEN WIRE - (1) Sheet. SPECS: Machined steel. 4" (10 cm) long. corners sharp, without funneled screw holes or ground- off screw heads—if he is careful to clean the gun properly BLACK IRON WIRE - (1) Roll.
Load more

Recommended publications
  • Bluing of Iron and Steel
    e GWG : CAR U. S. DEPART MENT OF COMMERCE Letter VtII-2 NATIONAL BUREAU OF STANDARDS Circular WASHING-TON LC630 • February 19’Ul 1 , BLUING OF IRON AND STEEL CONTENTS // * I. Introduction II. Influence o,f surface conditions on the coloring 1. Surface finish 2. Cleanliness of the surface III. Temper-coloring or heat- tinting in air 1. Interference colors 2. Time -temperature relationship Influence of the size and shape of the articlf l Coloring by preheating IV. Coloring in molten salt baths 1. Time-temperature relationship 2. Composition of baths and operating conditions V. Coloring in aqueous solutions 1. Advantages and limitations 2 . C 1 e an i n g pr 0 c e dur 3. Formulas and operating conditions VI. Coloring by electrolytic methods 1. Types and controlling factors 2. Cathodic coloring 3. Anodic coloring 4-, Alternate anodic and cathodic coloring VII. Selected references BLUING- OF IRON AND STEEL I. INTRODUCTION The bluing of iron- or steel is the subject of f requent in- quiries, for replies to which this letter circular has been pre- pared. Many formulas and methods have been described in the technical literature. The results of a survey of these methods form the basis of this letter circular. Only the favorably re- ported methods for the d irect bluing have been included, and no tests were made with indTirect methods, such as those requiring the electroplating of the steel with another metal and the sub- sequent bluing of that metallic surface. Similarly this report does not include any study of coloring by painting, enameling, or other coating methods.
    [Show full text]
  • Historical Iron by CLARA DECK, CONSERVATOR REVISIONS by LOUISE BECK, CONSERVATOR
    The Care and Preservation Of Historical Iron BY CLARA DECK, CONSERVATOR REVISIONS BY LOUISE BECK, CONSERVATOR Introduction Historical iron can be maintained for years of use and enjoyment provided that some basic care and attention is given to its preservation. The conservation staff of The Henry Ford have compiled the information in this fact sheet to help individuals care for their objects and collections. The first step in the care of collections is to understand and minimize conditions that can cause damage. The second step is to follow basic guidelines for care, handling and cleaning. Please note - this fact sheet will present a brief overview of the care of iron objects, stressing good storage as the best method of preservation. It does not address the serious problems of preserving archaeological metals excavated from land or marine sites. People who collect Un conserved archaeological artifacts should be aware that those types of objects are rarely stable if left untreated and require significant specialist intervention. Please contact a conservator if you need assistance with conservation of these materials. Iron is a common metal in historical collections. It is found in a variety of alloys, known as "ferrous metals", including wrought iron, cast iron and steel. Galvanized or tin-plated sheet is also a familiar material in historical collections. Ferrous metals are magnetic so the presence of iron can, therefore, be easily identified with the use of a magnet. Types of Damage Poor handling and inappropriate storage are the major causes of damage to iron artifacts and can result in corrosion and physical damage to the object.
    [Show full text]
  • Black Oxide Project: Full Interview with ZFX Shop Foreman Dylan Lightfoot September 7, 2007
    Black Oxide Project: Full Interview with ZFX Shop Foreman Dylan Lightfoot September 7, 2007 E: Tell me about the Black Oxide Project. D: It sounds very mysterious, doesn’t it – even foreboding. It’s actually nothing new. It’s a chemical process, also called passivation, which both darkens ferrous metals by immersion in alkaline salts and makes them rust-resistant. Any local metal finishing or plating firm is set up to do black oxide. Gunsmiths have small black oxide set-ups, only when they do it, it’s called bluing. Basically, a piece of metal is run through a series of chemical treatments and rinses, maintained at specific concentrations and temperatures, which results in a black, dark brown or deep blue finish. E: What, then, is different about what ZFX is trying to do? D: First, we are trying to blacken stainless steel wire rope. Blackening stainless isn’t unheard of: the military does it, and the vendor we use for our chemicals actually makes salts that meet military specifications. But some people I talked to seemed to think I was a little bit stupid when I asked about products or processes for blackening stainless steel, which is already rust- proof, so it’s not all that common. Second, our goal is not to dip discrete lengths of coiled wire rope in vats of chemicals, as has been done for us by outsource firms in the past. This way of doing things only gives a certain length of wire rope the treatment, which is naturally limiting. Also, there have been problems with quality control: black oxide, if done improperly, will give a non-adherent finish, leave residual chemicals inside the strands, and possibly render the rope brittle.
    [Show full text]
  • Nitreblue® Bluing by the Crew at Brownells
    Orders: 800-741-0015 Office: 641-623-5401 Fax: 641 623 3896 www.brownells.com 200 SOUTH FRONT STREET MONTEZUMA, IA 50171 NitreBlue® Bluing by the Crew at Brownells WARNING USE EXTREME CAUTION - YOU ARE WORKING WITH CHEMICALS HEATED TO 300° F.-900° F. READ AND FOLLOW ALL SAFETY PROCEDURES TO HELP PREVENT INJURY OR PROPERTY DAMAGE. DANGER - SPECIAL CAUTION - READ ALL INSTRUCTIONS AND UNDERSTAND FULLY BEFORE PROCEEDING! • NEVER immerse parts that have been Cyanide-bath hardened into NitreBlue Bluing Bath unless all traces of cyanide compounds are removed. • CONTACT with organic material may cause a fire. • CONTACT with acids may release toxic fumes. • NEVER allow water to contact molten Nitre Blue Bluing Bath; dangerous steam explosions can result. • NEVER immerse wet or damp parts in molten NitreBlue Bluing Bath; dangerous steam explosions can result. • NEVER add any chemical or additives to NitreBlue Bluing Salts or molten NitreBlue Bluing Bath. Danger: Oxidizer - Contains Sodium Nitrite, Sodium Nitrate and Potassium Nitrate. Avoid contact with eyes and skin. For eyes: Flush with water for 15 minutes. Consult physician immediately. For skin: Wash with soap and water. Do not take internally. If swallowed: Induce vomit- ing. Consult physician immediately. Use with adequate ventilation. Avoid vapors. If inhaled: Move to fresh air. Rinse mouth and nasal pas- sages with water. Avoid contact with Cyanides, wear face shield, heat resistant gloves and protective apron. Bluing is very effective. Drawing on the style of “coloration” of qual- INTRODUCTION ity old rifles and guns, such as the Mannlicher-Schoenauers, you find nitre blued and “strawed” parts. Usually these are temper colors on NitreBlue Bluing is a controlled heating process that will color hardened parts.
    [Show full text]
  • OXYNATE® No. 84 INSTRUCTIONS & EQUIPMENT
    800-741-0015 • brownells.com 200 SOUTH FRONT STREET MONTEZUMA, IA 50171 OXYNATE® No. 84 INSTRUCTIONS & EQUIPMENT By well, for most of the stainless steels used in guns will hold a magnet. BOB BROWNELL In fact, we have not yet found one that didn’t! So, more than one gunsmith has tried and failed to hot blue one of these barrels in the and the Crew at Brownells usual way without realizing that it was stainless steel - and, that it was not going to blue! Stainless steel has been used to a limited extent for many years In operation, Oxynate No. 84 is not as easy as Oxynate No. 7 - but by American firearms manufacturers. Winchester, for example, used almost! You do have to vary the temperature between 240° F. and 270° stainless steel in some rifles prior to World War II. However, it has F.; you may have to pull the part out and give it a good Hydrochloric only been within the last ten years or so that it has gained such Acid etch (until it gasses well), before the part will turn blue. And, wide popularity with the gunmakers and shooters who were greatly you will have to spend a variable amount of time at the tank depend- attracted to its great corrosion resistance and ease of maintenance. ing upon which temperature finally “kicks” the part over to blue. These factors are particularly important for duty guns, any wetland Sometimes the blue is incredibly jet black; other times, depending on hunting guns and many personal-protection guns.
    [Show full text]
  • Letter Circular 630: Bluing of Iron and Steel
    e GWG : CAR U. S. DEPART MENT OF COMMERCE Letter VtII-2 NATIONAL BUREAU OF STANDARDS Circular WASHING-TON LC630 • February 19’Ul 1 , BLUING OF IRON AND STEEL CONTENTS // * I. Introduction II. Influence o,f surface conditions on the coloring 1. Surface finish 2. Cleanliness of the surface III. Temper-coloring or heat- tinting in air 1. Interference colors 2. Time -temperature relationship Influence of the size and shape of the articlf l Coloring by preheating IV. Coloring in molten salt baths 1. Time-temperature relationship 2. Composition of baths and operating conditions V. Coloring in aqueous solutions 1. Advantages and limitations 2 . C 1 e an i n g pr 0 c e dur 3. Formulas and operating conditions VI. Coloring by electrolytic methods 1. Types and controlling factors 2. Cathodic coloring 3. Anodic coloring 4-, Alternate anodic and cathodic coloring VII. Selected references BLUING- OF IRON AND STEEL I. INTRODUCTION The bluing of iron- or steel is the subject of f requent in- quiries, for replies to which this letter circular has been pre- pared. Many formulas and methods have been described in the technical literature. The results of a survey of these methods form the basis of this letter circular. Only the favorably re- ported methods for the d irect bluing have been included, and no tests were made with indTirect methods, such as those requiring the electroplating of the steel with another metal and the sub- sequent bluing of that metallic surface. Similarly this report does not include any study of coloring by painting, enameling, or other coating methods.
    [Show full text]
  • Passivation (Chemistry)
    Passivation (chemistry) For the concept in nonlinear control, see Feedback pas- 2.0 sivation. For the concept in spacecraft, see Passivation 1.6 2- (spacecraft). FeO4 1.2 Fe 3+ Passivation, in physical chemistry and engineering, 0.8 refers to a material becoming “passive,” that is, less af- 0.4 nH O [V] Fe 2O 3 2 fected or corroded by the environment of future use. Pas- 2+ 0 Fe sivation involves creation of an outer layer of shield mate- ε 0 rial that is applied as a microcoating, created by chemical -0.4 Fe O43 Fe(OH) reaction with the base material, or allowed to build from 2 - HFeO2 spontaneous oxidation in the air. As a technique, passiva- -0.8 tion is the use of a light coat of a protective material, such -1.2 Fe as metal oxide, to create a shell against corrosion. Passi- vation can occur only in certain conditions, and is used in 0 2 4 6 8 10 11 14 [1] microelectronics to enhance silicon. The technique of pH passivation strengthens and preserves the appearance of metallics. In electrochemical treatment of water, passiva- Pourbaix diagram of iron.[5] tion reduces the effectiveness of the treatment by increas- ing the circuit resistance, and active measures are typi- cally used to overcome this effect, the most common be- metal, the mechanism of oxygen diffusion through the ing polarity reversal, which results in limited rejection of metal oxide to the parent metal, and the relative chemical the fouling layer. Other proprietary systems to avoid elec- potential of the oxide.
    [Show full text]
  • Ajax Electric
    Technologies and Processes for the Advancement of Materials ISSUE FOCUS /// QUENCHING / INDUCTION HEATING COMPANY PROFILE /// Ajax Electric JULY 2019 thermalprocessing.com ATTENDEE INFO WHY DETROIT? PAID Non-profit ATTENDEES REPRESENT THE Postage US ASM International th HEAT TREATING SOCIETY FOLLOWING COMPANIES* 1. Technology 30 CONFERENCE & EXPOSITION From automotive to aviation to defense, Detroit is changing the AAM Chevron Honeywell Praxair way the world moves. Their unmatched automotive research, Advanced HT Chrysler Hyundai Rolls-Royce design and advanced manufacturing resources make this Air Products Cummins Intel Siemens region the leader in next-generation mobility and technology Visit us at Booth 707 Alcoa Dana John Deere Solar Turbines development. Detroit’s culture of innovation is ready to help Allison Transmission Dow Chemical Joy Global Timken Alstom Eaton Lockheed Martin United Technologies your business grow! Annealing Ford Motor Magna Powertrain US Steel Bluewater Thermal FPM Metal Improvement Woodworth HT 2. Automobile Capital of the Word Borg Warner General Dynamics Nexteer XTEK Detroit is second largest source of architectural and engineering Bodycote General Electric NSK ZF job opportunities in the U.S., with the domestic auto industry Boeing General Motors Northrop Grumman *Partial listing primarily headquartered in Metro Detroit. October 15-17, 2019 Carpenter Gerdau Oerlikon Caterpillar Honda Parker Hannifin 3. Global Detroit, Michigan ATTENDEES Why do 1,300 firms from 38 countries call the Detroit region ANNUAL BOOTH home? Detroit is the perfect location when you’re looking to COBO Center INCREASE BY STATE (TOP 10) access U.S. and Canadian markets. Home to one of the world’s most valuable border crossings and Detroit Metro Airport – with 350 nonstop flights to more than 160 destinations – they’ll get your 2% 39% 3% 300 business where it needs to go.
    [Show full text]
  • HEAT TREATMENT SOLUTIONS TRADITION – KNOWLEDGE – QUALITY MIHEU D.O.O
    HEAT TREATMENT SOLUTIONS TRADITION – KNOWLEDGE – QUALITY MIHEU d.o.o. IS A FAMILY BUSINESS WITH OVER 40 YEARS OF EXPERIENCE IN THE FIELD OF HEAT TREATMENT OF STEEL. Throughout its existence, the company has grown and developed in order to pursue the individual needs of customers. Starting as a workshop for hardening and tempering and case-hardening, it has expanded into a heat treatment center with a wide range of additional services. The company continues to grow, while maintaining its flexibility and responsiveness of smaller systems. Heat treatment solutions range from traditional oil hardening and tempering in pit furnaces to the most advanced systems for the processes of carburizing, carbonitriding, nitrocarburizing, vacuum furnace hardening and all kinds of nitriding, gas as well as plasma nitriding. Investing in superior equipment and highly qualified personnel, together with many years of experience and knowledge, sets the main guideline of the company to achieve the best results. Additional services represent a wide range of treatments that enable the company to find the most appropriate solution for customer's specific requirements. This covers the processes of annealing, quenching (oil or water) and normalization, sandblasting and bluing, dimensional control and straightening, and above all, CNC machining on high-performance milling and grinding centers. Advising the customer to find the right solution is the basic approach to a successful partnership. In our own laboratory, we monitor heat treatment quality with advanced instruments using hardness and microhardness measuring equipment and optical microscopes to inspect microstructures. These analyses help us confirm that results are really in accordance with customers' specifications.
    [Show full text]
  • Conversion Coatings for Aluminum and Magnesium by Don Baudrand, CEF*
    Technical Article Conversion Coatings for Aluminum and Magnesium by Don Baudrand, CEF* 5 Conversion coatings can be produced on a variety maintain the protection. Chromates also have low emis- of metals by chemical treatment or electrolytic sivity coeffi cients, less than those of anodized or painted processes. This paper will discuss conversion coat- surfaces. This is important in preventing parts from heat- ings on the light metals aluminum and magnesium. ing up during exposure to infrared radiation. However for Preparation and operating process parameters are other applications, emissivity can be increased by applying 7 important to obtaining best results. Corrosion pro- a thicker fi lm. Recently, non-chromium containing con- tection, self-healing, dying, electrical conductivity, version coatings were introduced that are improvements bonding, hardness and heat resistance characteristics over earlier such processes and may rival chromate coat- of conversion coatings containing chromium are dis- ings in some respects. cussed. MIL specifi cations and testing are included. The mechanism of fi lm formation and chemistry are Chromate conversion coatings for also discussed. aluminum Chromate conversion coatings are formed when the chem- A conversion coating refers to the chemical treatment of icals in the chromating solution react with aluminum, dis- a metal surface where the metal is converted into a non- solving the aluminum oxide and some metal causing a rise metallic form at the surface, forming a fi lm. Conversion in pH at the solution-metal interface. The result is precipi- coatings have an important role in the metal finishing tation of complex hydrous oxides of aluminum, chromium industry because of their enhanced corrosion protection and chromium chromate that form a gel on the surface.
    [Show full text]
  • Parkerizing 1 Parkerizing
    Parkerizing 1 Parkerizing Parkerizing (also called phosphating and phosphatizing) is a method of protecting a steel surface from corrosion and increasing its resistance to wear through the application of an electrochemical phosphate conversion coating. Parkerizing is usually considered to be an improved zinc or manganese phosphating process, and not to be an improved iron phosphating process, although some use the term parkerizing as a generic term for applying phosphating (or phosphatizing) coatings that does include A Parkerized .45 ACP pistol the iron phosphating process. Parkerizing is commonly used on firearms as a more effective alternative to bluing, which is another electrochemical conversion coating that was developed earlier. The Parkerizing process cannot be used on non-ferrous metals such as aluminum, brass, or copper. It similarly cannot be applied to steels containing a large amount of nickel, or on stainless steel. Passivation can be used for protecting other metals. Application The process involves submerging the metal part into a phosphoric acid solution whose key ingredient is often zinc or manganese, with varying additional amounts of nitrates and chlorates and copper. In one of the many processes that have been developed, the solution is heated to a temperature of 190–210 °F (88–99 °C) for a period ranging between 5 and 45 minutes. A stream of small bubbles is emitted from the metal part as the process takes place; when the bubbling stops, the process is complete. In addition to this particular processing temperature, there have also been various similar Parkerizing processes developed and patented that permit using either lower temperatures (for energy efficiency) or higher temperatures (for faster processing).
    [Show full text]
  • Bluing Instructions & Supplies
    200 S. Front St. Montezuma, IA 50171 800-741-0015 or 641-623-4000 • www.brownells.com World’s Largest Supplier of Firearm Accessories and Gunsmithing Tools Bluing Instructions & Supplies OXYNATE® NO. 7 HOT BLUING necessary for complete satisfaction - something the other suppliers INTRODUCTION of bluing salts either cannot or will not, do. Bob, Frank and Pete Brownell’s care and concern for their customers is legendary, and Since the dawn of time, sportsmen have been spending more hours has built the business to its present level. And, they have fine-honed cleaning and caring for their shooting and hunting equipment than the entire crew to provide and maintain this top-quality level of have ever been spent using this equipment. Even King David of Customer Service first, last and always. Biblical fame cared for and practiced with his sidearm, the sling. The Futhermore, Brownells maintains access to the production testing Yeomen of England and the Longriflemen of New England realized laboratory of the worldwide and world-famous chemical organiza- that in order to stay alive, it was absolutely essential to ensure the tion who custom mixes Oxynate No. 7 to Brownells’ specifications. reliability of their shooting and hunting equipment. (Because of OSHA requirements for handling caustic materials, the The urge to care for your gun, to keep it in top flight condition, was mixing and packaging cannot be done in Montezuma.) This laboratory born in you. The cave man had little luck with a rotten club - or an provides assistance for really tough bluing problems that are beyond Indian much use for a bow that had lost its spring.
    [Show full text]