10/100 Physical Layer Ethernet Switch,16-Port
Total Page:16
File Type:pdf, Size:1020Kb
10/100 PHYSICAL LAYER ETHERNET SWITCH,16-PORT Make 10/100 Physical Layer Ethernet connections without rewiring or rerouting cables. Key Features emotely configure, redistribute, Ethernet hub or network switch You can also instantly and Ideal for point-to-point R and monitor Ethernet devices using a crossover cable. Each effortlessly recall up to 16 Ethernet connections. in 10/100 Ethernet LAN connected device can be placed frequently-used patching environments. The 10/100 up to 328 ft. (100 m) away from the configurations (stored in the Auto-adapts port Physical Layer Ethernet Switch, switch. switch’s non-volatile memory) via speed to either 10 or 16-Port provides point-to-point The switch installs between the LAN or RS-232 serial port. 100 Mbps. connectivity without rewiring or your patch panels and network The control software works rerouting cables. And it switch. Since it operates at the with Windows® 95/98/2000/XP and Switch between up to automatically adapts to port Physical Layer, the switch can Windows NT®. The PC connected 16 devices, each speeds of 10 or 100 Mbps. shut down the physical connec- to the serial port can be located located up to 328 ft. Attach 10BASE-T Ethernet or tion to specific workstations, up to 50 ft. (15.2 m) from the (100 m) away from the 100BASE-TX Fast Ethernet departments, or buildings. You switch, while the workstation switch. devices via the 16 RJ-45 can do this remotely via the connected to the LAN port can be connectors on the switch’s front control software and a PC located up to 328 ft. (100 m) away. Implement security at panel. These 16 connectors are connected to the RS-232 serial the Physical Layer. wired like an Ethernet hub. Link port (using the included serial standard Ethernet devices (such cable) or via a workstation Includes control as PCs) to the switch with straight connected to the TCP/IP LAN software accessible network cables. Or attach one of port. via the serial port or the switch’s ports directly to an the LAN port. Stores up to 16 user- defined configurations. Document Num0ber 26413 Page 1 of 2 Workstation Workstation Workstation Workstation Connect up to 16 port #1 port #2 port #9 port #10 10/100 Ethernet devices to the Physical Layer Switch. 10/100 Physical Layer Ethernet Switch, 16-Port Server Laser printer Server Specialized control port #3 port #4 port #6 device port #12 Specifications Ethernet Ports Serial Interface LAN Control Port General Data Rate: 10 or 100 Mbps Data Rate: 9600 bps (default) or Data Rate: 10 Mbps Agency Approvals: UL®, CUL, FCC 19.2 kbps, software-selectable Class A, CE Interface: 10BASE-T, 100BASE-TX Interface: 10BASE-T Ethernet Interface: RS-232 Operation: Half- or full-duplex Protocol: IEEE 802.3 10BASE-T Protocol: TCP/IP switching Protocol: Asynchronous Connectors: (16) RJ-45 female Connectors: (1) RJ-45 female Software Requirements: Connectors: (1) DB9 female Indicators: (32) LEDs: (16) Signal Indicators: Windows® 95/98/2000/XP or Detect; (16) non-functional LEDs Indicators: None (2) LEDs: (1) Link Active; Windows NT® for future use (1) LAN interface or TCP/IP Cable Length (Maximum): Temperature Tolerance: 32 to 131°F (socket) connection Cable Length (Maximum): To To serial management device: (0 to 55°C) devices connected via copper 50 ft. (15.2 m) Cable Length (Maximum): To Relative Humidity: Up to 90%, interfaces: 328 ft. (100 m) over devices connected via LAN Serial Management: No parity, noncondensing Category 5 or better UTPcable management interface: 328 ft. 8 data bits, 1 stop bit (8-conductor, 100-ohm) (100 m) over Category 5 or better Connector: (1) IEC-320 for power UTPcable Latency: Less than 20 nanoseconds Power: 90 to 260 VAC (auto-ranging), 47 to 63 Hz, 85 watts Size: 3.5"H x 16.75"W x 12"D (8.9 x 42.5 x 30.5 cm) Weight: 7 lb. (3.2 kg) Ordering Information What’s Included ITEM CODE • (1) 10/100 Physical Layer Ethernet Switch, 16-Port 10/100 Physical Layer Ethernet Switch, • (1) IEC-320 power cord 16-Port ......................................................................SW595A • (1) 10-ft. (3-m) DB9 male to DB9 female RS-232 cable You might also want to order… • (1) DB9 male to DB25 female RS-232 adapter CAT5 100-MHz Patch Cable with Molded Boots, • (2) Rackmounting brackets with (4) 12-24 screws 24 AWG, RJ-45, 4-Pair, PVC, Beige...................EVNSL25 • (4) Bottom feet • (1) CD-ROM containing control software • (1) Users’ manual Document Num0ber 26413 Page 2 of 2.