67693603.Pdf

Total Page:16

File Type:pdf, Size:1020Kb

67693603.Pdf Title 大阪府立大学工学研究科年報 2012 Author(s) Editor(s) 大阪府立大学大学院工学研究科 Citation 大阪府立大学工学研究科年報. 2012 Issue Date 2013-05-01 URL http://hdl.handle.net/10466/12931 Rights http://repository.osakafu-u.ac.jp/dspace/ 目 次 大阪府立大学大学院工学研究科 組織表(Organization) ………………………………………………… 001~000 機械系専攻(Mechanical Engineering) 機械工学分野(Department of Mechanical Engineering) ……………………………………………… 003~029 航空宇宙海洋系専攻(Aerospace and Marine System Engineering) 航空宇宙工学分野(Department of Aerospace Engineering) ………………………………………… 031~043 海洋システム工学分野(Department of Marine System Engineering) ……………………………… 45~057 電子・数物系専攻(Electronics, Mathematics and Physics) 数理工学分野(Department of Mathematical Sciences) ……………………………………………… 059~068 電子物理工学分野(Department of Physics and Electronics) ………………………………………… 069~095 電気・情報系専攻(Electrical Engineering and Information Science) 電気情報システム工学分野(Department of Electrical and Information Systems) ………………… 097~116 知能情報工学分野(Department of Computer Science and Intelligent Systems) ………………… 117~140 物質・化学系専攻(Materials Science and Engineering) 応用化学分野(Department of Applied Chemistry) …………………………………………………… 141~181 化学工学分野(Department of Chemical Engineering) ………………………………………………… 183~198 マテリアル工学分野(Department of Material Science) ……………………………………………… 199~220 研究費補助および共同研究等 ………………………………………………………………………………… 221~245 学位論文題目リスト:修士(工学) …………………………………………………………………………… 247~256 学位論文題目リスト:博士(工学) …………………………………………………………………………… 257~258 被顕彰者 ………………………………………………………………………………………………………… 259~261 外国からの来訪者 ……………………………………………………………………………………………… 262 「大学院工学研究科年報2012年度版」刊行に寄せて 工学研究科長 池田 良穂 公立学校法人大阪府立大学は、今年、創基130年を迎えます。その源流は、明治16年に開設された獣 医学講習所だと言われており、そこから数えると130年となります。戦後、大阪府立大学、大阪女子大学、 大阪府立看護大学の3つが大阪府立の新制大学として設置され、平成17年にはすべての府立の大学が統 合され、公立大学法人大阪府立大学として法人化されています。 工学部は昭和24年に設置されており、昭和28年には大学院工学研究科が設置されました。この当時は、 大学院は学部の上に付加された教育・研究組織で、教員は工学部に所属しており、そこから大学院に教 えに行くというスタイルでした。平成になって、主要国立大学は、大学院を中心にした教育研究組織に 組み替えられ、これを大学院重点化または部局化と呼んでいます。すなわち、教員は大学院に所属して 教育研究を行い、そこから学部に教えに行くスタイルに変わったのです。大阪府立大学の工学部も、平 成12年に部局化を行い、大学院を中心とする高度研究型大学へと変身しました。 現在、本学大学院工学研究科には6専攻、11分野があり、学士教育を行う工学部・工学域には10学科・ 課程があります。本研究科では、公立大学法人大阪府立大学が掲げる「高度研究型大学~世界に翔たく 地域の信頼拠点~」の理念のもと、その中核組織として、最先端の研究を行い、それに基づく教育によ って社会が求める優秀な学生を育成すると共に、200名余りの教員がもつ知識と知恵を地域社会に還元 することに日夜努力をしています。 本工学研究科年報は、平成24(2012)年4月から翌年3月までに、工学研究科の教員や学生が発表した 著書、論文、国際会議録、解説・総説や、国際会議や国内学会での講演、新聞・雑誌記事への掲載を網 羅的に紹介しています。また、巻末には科学研究費等の外部資金の獲得状況、工学研究科を巣立ってい った学生の修士、博士の学位論文のリストも掲載しています。 ご紹介した研究成果の中には、学会等からその優秀さを認められて表彰されたものも多くあります。 それも巻末の被顕彰者のリストにまとめています。 国際交流は、本学の学問レベルを高めて世界的な標準以上にしていくためには欠かせません。毎年、 たくさんの教員・学生が海外に出かけて、論文発表、研究、調査などをしていますが、工学研究科の教 員を訪問して研究交流をする海外の研究者もたくさんいます。そのリストも掲載しました。 このように本学工学研究科における活動と研究成果のすべてが本年報にリストアップをされていますの で、ぜひお目通しいただき、ご活用いただけるテーマがあれば、各教員のホームページ等をご覧いただ いて直接コンタクトをとっていただくか、本学地域連携研究機構の産学官連携室または工学研究科リエ ゾンオフィスにお問い合わせをいただければ幸いです。 2013年4月 大阪府立大学大学院工学研究科 組織表 専攻機械系 大学院 工学研究科 機械工学分野 航空宇宙海洋 生命環境科学研究科 系専攻航空宇宙工学分野 理学系研究科 海洋システム工学分野 電子・数物 経済学研究科 系専攻数理工学分野 大阪府立大学 人間社会学研究科 電子物理工学分野 電気・情報 看護学研究科 系専攻電気情報システム工学分野 総合リハビリテーション学研究科 知能情報工学分野 物質 ・ 化学系専攻 応用化学分野 化学工学分野 マテリアル工学分野 工学部 機械工学科 学部 航空宇宙工学科 生命環境科学部 平成23年度までの 海洋システム工学科 入学生 理学部 数理工学科 電子物理工学科 経済学部 電気情報システム工学科 人間社会学部 知能情報工学科 応用化学科 看護学部 化学工学科 総合リハビリテーション学部 マテリアル工学科 生産技術センター 現代システム科学域 学域 平成24年度以降の 工学域 電気電子系学類 情報工学課程 入学生 電気電子システム工学課程 生命環境科学域 数理システム課程 地域保健学域 電子物理工学課程 機構等 高等教育推進機構 物質化学系学類 応用化学課程 化学工学課程 地域連携研究機構 マテリアル工学課程 国際交流推進機構 機械系学類 航空宇宙工学課程 21世紀科学研究機構 海洋システム工学課程 学術情報センター 機械工学課程 学生センター 1 機械系専攻 機械工学分野 教 授 伊 藤 智 博 井 前 讓 大久保 雅 章 大多尾 義 弘 菊 田 久 雄 須 賀 一 彦 杉 村 延 広 瀬 川 大 資 高比良 裕 之 三 村 耕 司 村 瀬 治比古 横 山 良 平 吉 田 篤 正 准教授 石 原 正 行 岩 村 幸 治 楳 田 努 金 田 昌 之 木 下 進 一 黒 木 智 之 新 谷 篤 彦 谷 水 義 隆 涌 井 徹 也 講 師 中 嶋 智 也 助 教 大 藏 将 史 小笠原 紀 行 片 岡 秀 文 亀 尾 佳 貴 小 林 友 明 中 川 智 皓 福 田 弘 和 水 谷 彰 夫 安 田 龍 介 山 田 哲 也 陸 偉 1.学術論文,国際会議Proc. ■ 準静的-動的遷移速度域における両端および中間部を ■ Transient thermoelastic analysis for a functionally 拘束された長柱の動的座屈挙動 graded circular disk with piecewise power law 三村耕司,菊井巧也,西出直広,楳田 努,陸 偉, N. Noda, Y. Ootao and Y. Tanigawa 橋本裕明 Journal of Theoretical and Applied Mechanics, 50, 831- 日本材料学会誌, 61(11), 881-887(2012). 839(2012). ■ Computational Characterization of Micro- to ■ Microscale Fluid Flow Analysis in Human Osteocyte Macroscopic Deformation Behavior of Double Canaliculus Using a Realistic High-resolution Image- Network Hydrogel based Three-dimensional Model I. Riku and K. Mimura H. Kamioka, Y. Kameo, Y. Imai, A.D. Bakker, R.G. Key Engineering Materials, 525-526, 193-196(2012). Bacabac, N. Yamada, A. Takaoka, T. Yamashiro, T. Adachi, and J. Klein-Nulend ■ Micro- to Macroscopic Mechanical Behavior of Integrative Biology, 4, 1198-1206(2012). Nafion Membranes I. Riku, K. Murata and K. Mimura ■ Poroelastic Analysis of Interstitial Fluid Flow in Proceedings of ACCM8, Composites: Enabling Tomorrow’s Trabecula under Cyclic Loading Industry Today, O-MFC-105, 5 pages(2012). Y. Kameo and T. Adachi Proceedings of 18th Congress of the European Society ■ Effect of Microscopic Phases on Mechanical Behavior of Biomechanics, CD-ROM, S93(2012). of Nafion Membranes K. Murata, I. Riku and K. Mimura ■ Genetic Alogorithm Optimization for Tensioning in Proceedings of ACCM8, Composites: Enabling Tomorrow’s a Circular Saw Industry Today, P-MFC-129, 4 pages(2012). M. Ishihara, H. Murakami, Y. Ootao, and N. Noda Proceedings of ACMFMS 2012: Mechanics of Functional ■ Development of Long Column Type Composite Materials and Structures, 357-360(2012). Mimicking Leaf Vein’s Internal Structure I. Riku, S. Fukawa and K. Mimura ■ Transient Thermoelastic Analysis for a Multilayered Proceedings of the Seventh International Workshop on Hollow Cylinder with Piecewise Power Law Green Composites, 19-22(2012). Nonhomogeneity due to Asymmetric Surface Heating Y. Ootao and M. Ishihara ■ Genetic Algorithm Optimization for Additional Proceedings of ACMFMS 2012: Mechanics of Functional Tensioning in Rotating Circular Saw under Thermal Materials and Structures, 465-468(2012). Load M. Ishihara, H. Murakami, and Y. Ootao ■ Optimization for Dynamic Characteristics of a Circular Journal of Solid Mechanics and Materials Engineering, 6, Saw Subjected to Tensioning over a Multiple Annlar 900-912(2012). Domain H. Murakami, M. Ishihara, and Y. Ootao ■ Genetic Algorithm Optimization for Tensioning in a Proceedings of ACMFMS 2012: Mechanics of Functional Rotating Circular Saw Under a Thermal Load Materials and Structures, 617-620(2012). M. Ishihara, H. Murakami, and Y. Ootao Journal of Thermal Stresses, 35, 1057-1075(2012). ■ Modeling Trabecular Bone Adaptation Regulated by Mechanosensing Osteocytes ■ Exact solution of transient thermal stress problem Y. Kameo and T. Adachi of a multilayered magneto-electro-thermoelastic Proceedings of ACMFMS 2012: Mechanics of Functional hollow sphere Materials and Structures, 667-670(2012). Y. Ootao and M. Ishihara Applied Mathematical Modelling, 36, 1431-1443(2012). ■ Analysis of Kinematic Motion Deviations of Rotary Tables Based on Geometric Tolerances ■ Transient Thermal Stress Problem of a Functionally N. Sugimura, H. Watabiki, W. Thasana, K. Iwamura and Graded Magneto-Electro-Thermoelastic Hollow Y. Tanimizu Cylinder Due to a Uniform Surface Heating Journal of Advanced Mechanical Design, Systems, and Y. Ootao and M. Ishihara Manufacturing, 6(7), 1132-1142(2012). Journal of Thermal Stresses, 35, 517-533(2012). 3 ■ Multi-Objective Production and Transportation ■ Traveling Waves of Circadian Gene Expression in Scheduling Considering Carbon Dioxide Emissions Lettuce Reductions in Dynamic Supply Chains K. Ukai, K. Inai, N. Nakamichi, H. Ashida, A. Yokota, Y. Y. Tanimizu, K. Amano, K. Harada, C. Ozawa and N. Hendrawan, H. Murase and H. Fukuda Sugimura Environ. Control, 46(2), 123-128(2012). International Journal of Automation Technology, 6(3), 322-330(2012). ■ Spiral Waves in Gene Expression of Cellular Circadian H. Fukuda, T. Ichino, K. Kohmoto and H. Murase ■ Computational Evaluation of Order Selection Synergy of Arts and Science, 16(2), 191-196,(2012). Methods in Dynamic Supply Chains Y. Tanimizu, B. Orita, Y. Shimizu, C. Ozawa, Y. Maeda, K. ■ Control of the Cellular Circadian Rhythms by a Iwamura and N. Sugimura Spatiotemporal Illumination in the Lettuce Leaf Procedia CIRP, 3, 281-286(2012). H. Fukuda, N. Seki, K. Ukai, K. Okamura and H. Murase Synergy of Arts and Science, 16(2), 197-203,(2012). ■ Flexible Multi-Layered Dynamic Supply Chain Models with Cooperative Negotiation ■ Self-Arrangement of Cellular Circadian Rhythms Y. Tanimizu, C. Ozawa, Y. Shimizu, B. Orita, K. Iwamura through Phase-Resetting in Plant Roots and N. Sugimura H. Fukuda, K. Ukai and T.Oyama International Journal of Automation Technology, 7(1), Phys. Rev. E, 86(4), 041917, 5 pages(2012). 128-135(2013). ■ Controlling Circadian Rhythms by Dark-Pulse ■ Development of Scheduling System Considering Perturbations in Arabidopsis thaliana Statistical Distributions of Processing Times for H. Fukuda, H. Murase and I. Tokuda Human Operators Scientific Reports, 3(1533), 1-7,(2013). K. Iwamura, T. Yoshioka, Y. Tanimizu and N. Sugimira Journal of Advanced Mechanical Design, Systems, and ■ Integrated-optic Subwavelength Triangle Array for Manufacturing, 6(5), 600-610(2012). Vertical Coupling between Optical Fiber and Si Waveguide ■ Analysis of Kinematic Motion Deviations of Rotary A. Mizutani, K. Mizuno, Y. Etou and H. Kikuta Tables Based on Geometric Tolerances Technical Digest of 17th Opto-Electronics and N. Sugimura, K. Iwamura, Y. Tanimizu, W. Thasana and Communications Conference(OECC2012), 259-260 Hiromi Watabiki (2012). Proceedings of ASME/ISCIE International Symposium on Flexible Automation 2012, CD-ROM, 4 pages(2012). ■ Towards Neutral Steer and Sideslip Reduction for Four-Wheeled Electric Vehicles ■ Analysis of Kinematic
Recommended publications
  • H-2 Family Home Launch Vehicles Japan
    Please make a donation to support Gunter's Space Page. Thank you very much for visiting Gunter's Space Page. I hope that this site is useful a nd informative for you. If you appreciate the information provided on this site, please consider supporting my work by making a simp le and secure donation via PayPal. Please help to run the website and keep everything free of charge. Thank you very much. H-2 Family Home Launch Vehicles Japan H-2 (ETS 6) [NASDA] H-2 with SSB (SFU / GMS 5) [NASDA] H-2S (MTSat 1) [NASDA] H-2A-202 (GPM) [JAXA] 4S fairing H-2A-2022 (SELENE) [JAXA] H-2A-2024 (MDS 1 / VEP 3) [NASDA] H-2A-204 (ETS 8) [JAXA] H-2B (HTV 3) [JAXA] Version Strap-On Stage 1 Stage 2 H-2 (2 × SRB) 2 × SRB LE-7 LE-5A H-2 (2 × SRB, 2 × SSB) 2 × SRB LE-7 LE-5A 2 × SSB H-2S (2 × SRB) 2 × SRB LE-7 LE-5B H-2A-1024 * 2 × SRB-A LE-7A - 4 × Castor-4AXL H-2A-202 2 × SRB-A LE-7A LE-5B H-2A-2022 2 × SRB-A LE-7A LE-5B 2 × Castor-4AXL H-2A-2024 2 × SRB-A LE-7A LE-5B 4 × Castor-4AXL H-2A-204 4 × SRB-A LE-7A LE-5B H-2A-212 ** 1 LRB / 2 LE-7A LE-7A LE-5B 2 × SRB-A H-2A-222 ** 2 LRB / 2 × 2 LE-7A LE-7A LE-5B 2 × SRB-A H-2A-204A ** 4 × SRB-A LE-7A Widebody / LE-5B H-2A-222A ** 2 LRB / 2 × LE-7A LE-7A Widebody / LE-5B 2 × SRB-A H-2B-304 4 × SRB-A Widebody / 2 LE-7A LE-5B H-2B-304A ** 4 × SRB-A Widebody / 2 LE-7A Widebody / LE-5B * = suborbital ** = under stud y Performance (kg) LEO LPEO SSO GTO GEO MolO IP H-2 (2 × SRB) 3800 H-2 (2 × SRB, 2 × SSB) 3930 H-2S (2 × SRB) 4000 H-2A-1024 - - - - - - - H-2A-202 10000 4100 H-2A-2022 4500 H-2A-2024 5000 H-2A-204 6000 H-2A-212
    [Show full text]
  • A Sample AMS Latex File
    PLEASE SEE CORRECTED APPENDIX A IN CORRIGENDUM, JOSS VOL. 6, NO. 3, DECEMBER 2017 Zea, L. et al. (2016): JoSS, Vol. 5, No. 3, pp. 483–511 (Peer-reviewed article available at www.jossonline.com) www.DeepakPublishing.com www. JoSSonline.com A Methodology for CubeSat Mission Selection Luis Zea, Victor Ayerdi, Sergio Argueta, and Antonio Muñoz Universidad del Valle de Guatemala, Guatemala City, Guatemala Abstract Over 400 CubeSats have been launched during the first 13 years of existence of this 10 cm cube-per unit standard. The CubeSat’s flexibility to use commercial-off-the-shelf (COTS) parts and its standardization of in- terfaces have reduced the cost of developing and operating space systems. This is evident by satellite design projects where at least 95 universities and 18 developing countries have been involved. Although most of these initial projects had the sole mission of demonstrating that a space system could be developed and operated in- house, several others had scientific missions on their own. The selection of said mission is not a trivial process, however, as the cost and benefits of different options need to be carefully assessed. To conduct this analysis in a systematic and scholarly fashion, a methodology based on maximizing the benefits while considering program- matic risk and technical feasibility was developed for the current study. Several potential mission categories, which include remote sensing and space-based research, were analyzed for their technical requirements and fea- sibility to be implemented on CubeSats. The methodology helps compare potential missions based on their rele- vance, risk, required resources, and benefits.
    [Show full text]
  • Secretariat Distr.: General 23 December 2014
    United Nations ST/SG/SER.E/735 Secretariat Distr.: General 23 December 2014 Original: English Committee on the Peaceful Uses of Outer Space Information furnished in conformity with the Convention on Registration of Objects Launched into Outer Space Note verbale dated 12 November 2014 from the Permanent Mission of Japan to the United Nations (Vienna) addressed to the Secretary-General The Permanent Mission of Japan to the United Nations (Vienna), in accordance with article IV of the Convention on Registration of Objects Launched into Outer Space (General Assembly resolution 3235 (XXIX), annex), has the honour to transmit information, including changes of status, on space objects launched by Japan (see annex). V.14-08659 (E) 311214 020115 *1408659* ST/SG/SER.E/735 Annex Registration data, including changes of status, on space objects launched by Japan* PROITERES Information provided in conformity with the Convention on Registration of Objects Launched into Outer Space Committee on Space Research 2012-047B international designator: Name: Project of Osaka Institute of Technology Electric-Rocket-Engine onboard Small Space Ship (PROITERES) National designator: 2012-047B State of registry: Japan Other launching States: India Date and territory or location of launch Date of launch: 9 September 2012 at 0423 hours 0 seconds UTC Territory or location of launch: Satish Dhawan Space Centre, Sriharikota, Andhra Pradesh, India Basic orbital parameters Nodal period: 97.7 minutes Inclination: 98.2 degrees Apogee: 653.1 kilometres Perigee: 634.9 kilometres
    [Show full text]
  • Thermal Analysis of a Small Satellite in Post- Mission Phase
    Journal of Multidisciplinary Engineering Science and Technology (JMEST) ISSN: 2458-9403 Vol. 6 Issue 2, February - 2019 Thermal Analysis of a Small Satellite in Post- Mission Phase Ahmed Elhefnawy Ahmed Elweteedy Space Technology Center Military Technical College Cairo, Egypt Cairo, Egypt [email protected] [email protected] Abstract— The objective of satellite thermal perigee altitude of 354 km, an apogee altitude of 1447 control is maintaining all satellite components km and an inclination of 71˚. A passive thermal control within their operational temperature range for system was used, with a small electric heater for the different missions. Most small satellites are battery. Thermal models were developed within both designed to have passive thermal control system. MATLAB/Simulink and ESATAN/ESARAD In this paper the thermal analysis of a small environments. satellite in post-mission phase is introduced. The Dinh [4] illustrated the modeling of a nanosatellite European Student Earth Orbiter (ESEO) satellite using Thermal Desktop software. The satellite has a was chosen in this study. This phase starts at the passive thermal control system. It was designed to end of the operational phase and should last at operate in LEO with altitude of 400 km. least 2 years for the chosen satellite. A finite Bulut et al [5] described the thermal control system difference thermal model using a commercial of Turksat-3U Nanosatellite [6]. The satellite orbit is software “Thermal Desktop” was described for the sun-synchronous orbit with altitude 600 km and selected satellite. Model results verification were inclination 98˚. The satellite has passive thermal performed by varying design variables and seeing control system.
    [Show full text]
  • ミルスペース 130727------[What’S New in Virtual Library?]
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -ミルスペース 130727- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - [What’s New in Virtual Library?] McGrawHill AW&ST Aviation Week BIS Space Flight 130715AWST_Contents.pdf, Cover.jpg 1308SF_Contents.pdf, Cover.jpg 130708AWST_Contents.pdf, Cover.jpg CASC Aerospace China Military Technology AerospaceChina_13summer_Vol.14_No.2_Contents.pdf, Cover.jpg 1306MT_Contents.pdf, Cover.jpg AerospaceChina_13spr_Vol.14_No.1_Contents.pdf, Cover.jpg [What’s New in Real Library?] 130715AW&ST, 130708AW&ST、Inside GNSS 2013.05&16 収蔵。 [謝辞] CASC より Aerospace China, summer2013 寄贈、航空図書館より Military Technology 2013 Issue 6 寄贈、NICT より NICT News 2013.07 No.430 寄贈、全て感謝。 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wed, Jul 24, 2013, 5:06 AM ET (0906 GMT) www.spacetoday.net/Summary/ [編注] 宇宙ヘルメットの中で本人はまるで鉢の中の金魚のように感じたとか。 事故調査委員会はスペースウォークの事故を調査することに Board to investigate spacewalk mishap NASA announced Tuesday that it has created a mishap board to water was leaking into his helmet; flight controllers aborted the investigate why a European astronaut's spacesuit filled with planned six-and-a-half-hour spacewalk. Up to 1.5 liters of water water during a spacewalk last week. The five-person board, leaked into Parmitano's helmet, making it difficult for him to see chaired by International Space Station chief engineer Chris or hear. The cause of the leak has yet to be identified. The Hansen, will start their work early next month in parallel with an members of the mishap
    [Show full text]
  • A Statistical and Personal History of University-Class Satellites
    SSC18-WKVIII-03 Reliving 24 Years in the Next 12 Minutes: A Statistical and Personal History of University-Class Satellites Michael Swartwout Saint Louis University 3450 Lindell Blvd, St. Louis, MO 63103; 314-977-8214 [email protected] ABSTRACT In 2018, university-class satellites -- spacecraft built by university students for the express purpose of student training -- are widely accepted as a means to recruit undergraduate students into the space workforce, train them effectively before graduation and retain them in the field after graduation. Hundreds of undergraduates at dozens of schools around the world have directly contributed to missions that operated on-orbit. The spacecraft themselves are capable of performance research-grade science or demonstrate new enabling technologies. This was not always the case. For the first forty years of spaceflight, there were exceedingly few university-class missions; those that flew were expensive, marginally-performing and had modest success rates. What changed? Why are university-class missions now commonplace? And, with respect to on-orbit success, are they as good (or as bad) as rumor and hearsay make them out to be? In this paper and all-too-brief talk, the history of university-class spacecraft will be discussed, with an emphasis on the types of missions and their success rates. Beginning in 1994 (the author's first time attending this conference, as a wide-eyed student) and reaching through to 2018 (the author's 21st, now as a world-weary professor) a statistical and anecdotal review of
    [Show full text]
  • Japanese University Micro/Nano/Pico-Satellite Projects" Second Edition
    Report on the current state of "Japanese University Micro/Nano/Pico-satellite Projects" Second Edition October 2012 - 1 - - 2 - Report on the current state of "Japanese University Micro/Nano/Pico-satellite Projects" October 2012 (ii) - 3 - -(i 4ii )- CONTENTS Introduction...................................................................................................................................vi Report on Japanese University Micro/Nano/Pico-satellite Projects .......................................1 A Aichi University of Technology ......................................................................................3 H Hokkaido Institute of Technology ..................................................................................5 K Kagawa University - Nohmi Laboratory...........................................................................11 Kyushu Institute of Technology - Center for Nanosatellite Testing..................................15 Kyushu University - Space Systems Dynamics Laboratory.............................................27 N Nihon University – Miyazaki Laboratory...........................................................................33 O Osaka Institute of Technology - Advanced Rocket Laboratory………………………..…....39 Osaka Prefecture University - Small Spacecraft Systems Research Center……………..47 S Shizuoka University - Yamagiwa Laboratory.....................................................................53 Soka University - Aerospace Laboratory of Innovative Engineer’s...................................57
    [Show full text]
  • Small-Satellite Mission Failure Rates
    NASA/TM—2018– 220034 Small-Satellite Mission Failure Rates Stephen A. Jacklin NASA Ames Research Center, Moffett Field, CA March 2019 This page is required and contains approved text that cannot be changed. NASA STI Program ... in Profile Since its founding, NASA has been dedicated CONFERENCE PUBLICATION. to the advancement of aeronautics and space Collected papers from scientific and science. The NASA scientific and technical technical conferences, symposia, seminars, information (STI) program plays a key part in or other meetings sponsored or helping NASA maintain this important role. co-sponsored by NASA. The NASA STI program operates under the SPECIAL PUBLICATION. Scientific, auspices of the Agency Chief Information Officer. technical, or historical information from It collects, organizes, provides for archiving, and NASA programs, projects, and missions, disseminates NASA’s STI. The NASA STI often concerned with subjects having program provides access to the NTRS Registered substantial public interest. and its public interface, the NASA Technical Reports Server, thus providing one of the largest TECHNICAL TRANSLATION. collections of aeronautical and space science STI English-language translations of foreign in the world. Results are published in both non- scientific and technical material pertinent to NASA channels and by NASA in the NASA STI NASA’s mission. Report Series, which includes the following report types: Specialized services also include organizing and publishing research results, distributing TECHNICAL PUBLICATION. Reports of specialized research announcements and completed research or a major significant feeds, providing information desk and personal phase of research that present the results of search support, and enabling data exchange NASA Programs and include extensive data services.
    [Show full text]
  • Satellite & Space
    SATELLITE AND SPACE COMMUNICATIONS SSC http://committees.comsoc.org/ssc/ IEEE COMMUNICATIONS SOCIETY SSC Newsletter Vol. 24, No. 1, June 2014 CONTENTS The Satellite and Space Communications (SSC) SSC Committee Meetings ........................... 1 Committee is a volunteer group actively involved in ICC2014 SSC Activities ............................. 1 advancing satellite and space communication How to join SSC Committee and mailing technologies within the IEEE. This committee is list………………………………………….2 approved by the IEEE Communications Society and Officers ....................................................... 2 is governed by the constitution and bylaws of the Message from the Chair .............................. 2 IEEE as well as the other twenty-three Technical Scanning the World ..................................... 5 Committees in the Society. The committee belongs Forthcoming ICC and GLOBECOM to the Technical Committee Clusters of Cosponsoring/Related Conferences and Workshops............................................ 6 Communication/Signal Processing (C/SP). Conference Calendar ................................... 8 Perspective Article ...................................... 9 SATELLITE & SPACE - JOIN US - ICC 2014 SSC Committee Activities: Symposium on Selected Areas in Communications: All conference attendees are Wednesday, 11 June 2014 • 14:30-16:00 welcome to join us in the SSC Location: Level 1, Room 4 Committee meeting. SAC-SSC-01: Satellite and Space Networking Location: Beaumont/Level 1, Chair: Andreas Knopp (Munich University of the Sheraton on the Park Bundeswehr & Institute for Information Transmission Date: Thursday, 12 June 2014 Systems, Germany) Time: 10:30-12:00 Friday 13 June 2014 • 16:00-17:30 Location: Level 4, Room 4 SAC-SSC-02: Satellite and Space Communications Future SSC Meetings Chair: Tomaso De Cola (German Aerospace Center (DLR), Germany) Dec. 2014, Austin, TX, USA June 2015, London, UK Dec. 2015, San Diego, USA http://committees.comsoc.org/ssc/ Vol.
    [Show full text]
  • Секретариат Distr.: General 31 August 2017 Russian Original: English
    Организация Объединенных Наций ST/SG/SER.E/812 Секретариат Distr.: General 31 August 2017 Russian Original: English Комитет по использованию космического пространства в мирных целях Информация, представляемая в соответствии с Конвенцией о регистрации объектов, запускаемых в космическое пространство Вербальная нота Постоянного представительства Японии при Организации Объединенных Наций (Вена) от 13 июля 2017 года на имя Генерального секретаря Постоянное представительство Японии при Организации Объединенных Наций (Вена) в соответствии со статьей IV Конвенции о регистрации объектов, запускаемых в космическое пространство (резолюция 3235 (XXIX) Генеральной Ассамблеи, приложение), имеет честь препроводить информацию о космиче- ских объектах, запущенных Японией (см. приложение I), и об изменении статуса ранее зарегистрированных космических объектов (см. приложение II). V.17-06215 (R) 210917 210917 *1706215* ST/SG/SER.E/812 Приложение I Регистрационные данные о космических объектах, запущенных Японией* Hodoyoshi 1 Информация, представляемая в соответствии с Конвенцией о регистрации объектов, запускаемых в космическое пространство Международное обозначение Комитета по исследованию космического пространства 2014-070B Название космического объекта Hodoyoshi 1 Национальное обозначение 2014-070B Государство регистрации Япония Другие запускающие государства Российская Федерация Дата и территория или место запуска 6 ноября 2014 года, 07:35:49 UTC пусковая база «Ясный», Оренбургская область, Российская Федерация Основные параметры орбиты Период обращения
    [Show full text]
  • Best Practices for Successful Lean Satellite Projects
    Best practices for successful lean satellite projects Mengu Cho and Hirokazu Masui Laboratory of Spacecraft Environment Interaction Engineering Kyushu Institute of Technology Kitakyushu, Japan 1 7th Nano-satellite Symposium Worldwide launch trend of small/micro/nano/pico satellites Source: Kyushu Institute of Technology2 Success and failure of Japanese university satellites 3 Source: Kyushu Institute of Technology Mission Status for all University-Class Missions up to 2016 Sourcec: University-Class Spacecraft by the Numbers: Success, Failure, Debris. (But Mostly Success.) By Michael Swartwout, Clay Jayne, Small Satellite Conference 2016 ( 25% does not give even radio signal DOA: Dead on arrival) 4 Approximately 50 % failure rate Improving? up to 2009 up to 2016 Success rate decreases CubeSat Survey of worldwide pico- and nanosatellite missions, distributions and subsystem technology, by J. Bouwmeester, Success rate actually decreases J. Guo, Acta Astronautica 67 (2010) 854–862 Up to 10kg Because of new-comers? 5 Lean satellite A lean satellite is a satellite that utilizes non-traditional, risk- taking development and management approaches – with the aim to provide value of some kind to the customer at low-cost and without taking much time to realize the satellite mission. Large Satellite size Pico Traditional system development cycle processes Untraditional system Lean development cycle satellite processes for low-cost and fast-delivery When we adopt untraditional development processes to achieve low-cost and fast-delivery, the size becomes inherently small Kyutech satellite testing record KSAT-2 STARS-Ⅱ Teikyo-sat3 UNITEC-1 HORYU-Ⅱ KSAT OPUSAT ChubuSat-3 launched in 2010 INVADER FITSAT-1 QSAT-EOS launched in 2012 Hodoyoshi3,4 Nano-JASMINE DIWATA-1 Hodoyoshi2 UNIFORM-1 (RISESAT) ChubuSat RISING-2 Velox-Ⅱ CE-SAT-I PROCYON しんえん2 ARTSAT2 HORYU-Ⅳ BIRDS launched in 2014 launched in 2015 STARS-C Aoba-VeloxⅢ Two-thirds of less-than-50kg Japanese satellites To be launched.
    [Show full text]
  • ODQN 18-2, April 2014
    National Aeronautics and Space Administration Orbital Debris Quarterly News Volume 18, Issue 2 April 2014 International Space Station Inside... Maneuvers Twice to Avoid Tracked Debris Nicholas Johnson After more than a year without a collision catalogued by the U.S. Space Surveillance Network. th Retires as NASA Chief avoidance maneuver, the International Space Station The second maneuver (18 in ISS history) (ISS) recently performed two maneuvers to avoid occurred on 3 April at 20:42 GMT. The predicted Scientist for OD 2 conjunctions with two separate debris pieces. The first conjunction was against mission-related debris maneuver was implemented at 1:30 GMT on 17 March from an Ariane 5 launch (International Designator First Results of against tracked debris (International Designator 2009-044D, U.S. SSN number 35758). The debris was WFPC2 Crater 1979-095BJ, U.S. Space Surveillance Network [SSN] a SYLDA (SYstème de Lancement Double Ariane) Analysis Presented satellite number 36917). This was the 17th ISS collision used to launch two satellites on an Ariane 5. This at 2014 LPSC 2 avoidance maneuver since 1999, but the first since object was in a highly elliptical orbit (25,842 x 295 km) 31 October 2012. The debris was a small, high drag with an inclination of 2.5° and had a drag eight times object that originated from the Meteor 2-5 spacecraft greater than the ISS. Due to the high eccentricity and NASA MCAT's (International Designator 1979-095A, U.S. SSN drag of the object, unusually large uncertainties were New Destination is number 11605). Meteor 2-5 was a Soviet meteor- associated with its trajectory prediction.
    [Show full text]