LUXE R LUXE R TM TM TM Assembly Instruction NEO110, NEO120, & NEO180 NAMES AND FUNCTIONS BidetOF PARTS Bidet *Please note: illustrations may vary depending on the model Water Flow Control Knob LUXE PARTS LUXE Nozzle Mode Knob Water Inlet Flexible Metal Plastic T-Adapter Adjustable Plates Braided Hose Rubber Washer 1/2” T-Adapter Toilet Tank Connection 15/16” Connection 6a 6b

1/2” 6a: Make sure that there is a 22” Length 4 5 Bidet Hose black rubber washer inserted Connection LUXE Bidet should now be ScrewLUXE the seat back at the top of the t-adapter. Wash Nozzle 15/16” Toilet Hose aligned with the on to the bidet and 6b: If it is not already there, Nozzle Guard Gate BidetConnection 1/4” Bidet coupling holes. the toilet. insert it as shown in figure 6b. Connection Installation Tools You May Need Flexible Water Supply Hose Connecting Water Supply 15/16” Toilet Tank Connection 7 7a: Make sure you have shut off the toilet water supply and flushed the Note: You may not need to use this part from the kit since a typical water toilet to empty the tank. Disconnect the water connection from the tank. Wrench Screwdriver(flat) connection is a flexible metal hose with 7b: Connect the plastic T-adapter to the water supply as shown in figure 7b. a15/16” toilet tank connection and LUXE 9/16” wall connection. LUXE The top of the t-adapter 9/16” Toilet WaterBidet Supply Connection connects with the water tank.

Shut off the toilet water supply. Top View of Toilet 1Flush toilet to empty the tank. LUXE Toilet LUXE Water Supply BidetValve

Toilet 7a Water Supply Valve 2 3 7b Remove the seat by Place the bidet on the toilet. Plates may be Tip: Do not use excessive force while tightening the connection. Hand tighten LUXEunscrewing the seat. adjusted depending on where the two holes LUXE Bidetthen use a wrench to gently tighten one quarter or half-turn more. in the back of the toiletBidet are. LUXE R LUXE R TM TM TM Assembly Instruction NEO110, NEO120, & NEO180 8 Bidet TROUBLESHOOTING Bidet For additional troubleshooting tips, please see our FAQS page at www.LuxeBidet.com. LUXE After installing the bidet, the toilet LUXEseat sits at an angle and no longer rests on the toilet bowl. Apply adhesive rubber bumpers to the bottom of the seat to eliminate the gap. Bumpers are available for purchase when you go to www.LuxeBidet.com/accessories.

When the bidet is on, no water comes out of the spray nozzle. Solution 1: Gently pump the nozzle up and down by hand. It may simply be stuck. Connect the metal braided hose to the t-adapter. Solution 2: Check that the t-adapter has been drilled all the way through so water can flow through it. If the t-adapter is blocked, please contact us for a replacement. 9 Water is leaking from a connection LUXE Solution 1: Try reconnecting the t-adapterLUXE to ensure that all threads are catching properly and that the connection is properly tightened. BidetSolution 2: If you have difficulty properly tightening the t-adapter to your toilet tank connection, try wrapping a thin layer of plumbing tape over the toilet tank threads before connecting the t-adapter. The plumbing tape will allow for added grip. Toilet Toilet Solution 3: If you continue to experience a drip from the t-adapter or any other connec- Water Water tion, please contact us. Supply Supply Valve Valve Connect the metal braided hose to the bidet inlet For other questions or concerns, please contact us at LUXE LUXEwww.LuxeBidet.com ASSEMBLEDBidet UNIT OPTIONAL ACCESSORY Water Available for Purchase at www.LuxeBidet.com/accessories Tank Bidet Controls Metal T-Adapter with Shut-Off Valve Toilet Seat (Cold Water)

Rubber Washer T-Adapter 15/16” Toilet Tank Connection LUXEMain Body of Bidet LUXE

Flexible Metal BidetShut-Off Bidet Hose Flexible Water Braided Hose Valve 1/2” Supply Hose Connection Stool Toilet Water Supply Valve 15/16” Toilet Hose Connection TRYING YOUR BIDET FOR THE FIRST TIME This metal t-adapter has a shut-off valve to limit or cut off cold water to the Congratulations! You are ready to use the LuxeBidet for the first time. Gently turn the bidet. It can be used instead of the plastic t-adapter for the cold water water pressure control knob to reach your desired spray pressure. The control only connection. LUXEregulates water pressure, not the duration of the spray. LUXE BidetFor more information, visit www.LuxeBidet.com. The working pressure of this product is 50+20 psi Bidet C 2Go Products, LLC