TABLE of CONTENTS Division Section Title PROCUREMENT AND

Total Page:16

File Type:pdf, Size:1020Kb

TABLE of CONTENTS Division Section Title PROCUREMENT AND TABLE OF CONTENTS Division Section Title PROCUREMENT AND CONTRACTING DOCUMENTS GROUP DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS 000101 PROJECT TITLE PAGE 003126 EXISTING HAZARDOUS MATERIAL INFORMATION SPECIFICATIONS GROUP General Requirements Subgroup DIVISION 01 - GENERAL REQUIREMENTS 011000 SUMMARY 011500 CONSTRUCTION AND SAFETY SIGNS 012300 ALTERNATES 012500 SUBSTITUTION PROCEDURES 013100 PROJECT MANAGEMENT AND COORDINATION 013200 CONSTRUCTION PROGRESS DOCUMENTATION 013233 PHOTOGRAPHIC DOCUMENTATION 013300 SUBMITTAL PROCEDURES 014000 QUALITY REQUIREMENTS 014200 REFERENCES 015000 TEMPORARY FACILITIES AND CONTROLS 016000 PRODUCT REQUIREMENTS 017300 EXECUTION 017700 CLOSEOUT PROCEDURES 017823 OPERATION AND MAINTENANCE DATA 017839 PROJECT RECORD DOCUMENTS 017900 DEMONSTRATION AND TRAINING 018130 PREFUNCTIONAL CHECKLIST 019113 GENERAL COMMISSIONING REQUIREMENTS Addendum-01 (11/20/17) Facility Construction Subgroup DIVISION 02 - EXISTING CONDITIONS 02085 ASBESTOS ABATEMENT 02090 LEAD-CONTAINING MATERIALS ENGINEERING CONTROL 02099 POLYCHLORINATED BIPHENYLS LIGHT BALAST REMOVAL 024119 SELECTIVE DEMOLITION DIVISION 03 – CONCRETE 033000 CAST IN PLACE CONCRETE DIVISION 06 - WOOD, PLASTICS, AND COMPOSITES 64116 PLASTIC-LAMINATE-CLAD ARCHITECTURAL CABINETS DIVISION 07 - THERMAL AND MOISTURE PROTECTION 072100 THERMAL INSULATION 079200 JOINT SEALANTS DIVISION 08 - OPENINGS 081113 HOLLOW METAL DOORS AND FRAMES 084113 ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS 085113 ALUMINUM WINDOWS 087100 DOOR HARDWARE 088000 GLAZING DIVISION 09 - FINISHES 09211623 GYPSUM BOARD SHAFT WALL ASSEMBLIES 092216 NON-STRUCTURAL METAL FRAMING 092900 GYPSUM BOARD 093013 CERAMIC TILING 095123 ACOUSTICAL TILE CEILINGS 096516 RESILIENT SHEET FLOORING 096519 RESILIENT TILE FLOORING 099123 INTERIOR PAINTING DIVISION 10 - SPECIALTIES 102600 WALL AND DOOR PROTECTION 102800 TOILET, BATH, AND LAUNDRY ACCESSORIES 104413 FIRE PROTECTION CABINETS 104416 FIRE EXTINGUISHERS DIVISION 11 - EQUIPMENT 11 14000 FOODSERVICE EQUIPMENT DIVISION 12 - FURNISHINGS 122413 ROLLER WINDOW SHADES 12366116 SOLID SURFACING COUNTERTOPS DIVISION 23 230800 COMMISSIONING Addendum-01 (11/20/17) DIVISION 27 - COMMUNICATIONS 270526 GROUNDING AND BONDING FOR COMMUNICATIONS SYSTEMS 270533 CONDUITS AND BACKBONES FOR COMMUNICATIONS SYSTEMS 270536 CABLE TRAY FOR COMMMUNICATIONS SYSTEMS 271100 TELECOMMUNICATIONS EQUIPMENT ROOMS 271313 COMMUNICATIONS COPPER BACKBONE CABLING 27123 COMMUNICATIONS OPTICAL FIBER BACKBONE CABLING 271500 HORIZONTAL CABLING Addendum-01 (11/20/17) 274116 AUDIOVISUAL SYSTEMS Addendum-01 (11/20/17) DIVISION 28 – ELECTRONIC SAFETY AND SECURITY 28100 ALARM CCTV AND ACCESS CONTROL END OF TABLE OF CONTENTS UDC Bertie Backus Campus - CAUSES Kitchen Addendum-01 Project No.: W16-008 November 20, 2017 SECTION 01 9113 GENERAL COMMISSIONING REQUIREMENTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. OPR and BoD documentation are included by reference for information only. 1.2 SUMMARY A. Section includes general requirements that apply to implementation of commissioning without regard to specific systems, assemblies, or components. B. Related Sections: 1. Section 23 0800 "Commissioning of HVAC" for commissioning process activities for HVAC&R systems, assemblies, equipment, and components. 1.3 DEFINITIONS A. BoD: Basis of Design. A document that records concepts, calculations, decisions, and product selections used to meet the OPR and to satisfy applicable regulatory requirements, standards, and guidelines. The document includes both narrative descriptions and lists of individual items that support the design process. B. Commissioning Plan: A document that outlines the organization, schedule, allocation of resources, and documentation requirements of the commissioning process. C. CxA: Commissioning Authority. D. OPR: Owner's Project Requirements. A document that details the functional requirements of a project and the expectations of how it will be used and operated. These include Project goals, measurable performance criteria, cost considerations, benchmarks, success criteria, and supporting information. E. Systems, Subsystems, Equipment, and Components: Where these terms are used together or separately, they shall mean "as-built" systems, subsystems, equipment, and components. 1.4 COMMISSIONING TEAM A. Members Appointed by Contractor(s): Individuals, each having the authority to act on behalf of the entity he or she represents, explicitly organized to implement the commissioning process through coordinated action. The commissioning team shall consist of, but not be limited to, GENERAL COMMISSIONING REQUIREMENTS 01 9113 - 1 UDC Bertie Backus Campus - CAUSES Kitchen Addendum-01 Project No.: W16-008 November 20, 2017 representatives ofContractor, including Project superintendent and subcontractors, installers, suppliers, and specialists deemed appropriate by the CxA. B. Members Appointed by Owner: 1. CxA: The designated person, company, or entity that plans, schedules, and coordinates the commissioning team to implement the commissioning process. Owner will engage the CxA under a separate contract. 2. Representatives of the facility user and operation and maintenance personnel. 3. Architect and engineering design professionals. 1.5 OWNER'S RESPONSIBILITIES A. Provide the OPR documentation to the CxA andContractor for information and use. B. Assign operation and maintenance personnel and schedule them to participate in commissioning team activities. C. Provide the BoD documentation, prepared by Architect and approved by Owner, to the CxA and Contractor for use in developing the commissioning plan, systems manual, and operation and maintenance training plan. 1.6 CONTRACTOR'S RESPONSIBILITIES A. Contractor shall assign representatives with expertise and authority to act on its behalf and shall schedule them to participate in and perform commissioning process activities including, but not limited to, the following: 1. Evaluate performance deficiencies identified in test reports and, in collaboration with entity responsible for system and equipment installation, recommend corrective action. 2. Cooperate with the CxA for resolution of issues recorded in the Issues Log. 3. Attend commissioning team meetings held on a variable basis. 4. Integrate and coordinate commissioning process activities with construction schedule. 5. Review and accept construction checklists provided by the CxA. 6. Complete paper construction checklists as Work is completed and provide to the Commissioning Authority on a weekly basis. 7. Review and accept commissioning process test procedures provided by the Commissioning Authority. 8. Complete commissioning process test procedures. 1.7 CxA'S RESPONSIBILITIES A. Organize and lead the commissioning team. B. Provide commissioning plan. C. Convene commissioning team meetings. GENERAL COMMISSIONING REQUIREMENTS 01 9113 - 2 UDC Bertie Backus Campus - CAUSES Kitchen Addendum-01 Project No.: W16-008 November 20, 2017 D. Provide Project-specific construction checklists and commissioning process test procedures. E. Verify the execution of commissioning process activities using random sampling. The sampling rate may vary from 1 to 100 percent. Verification will include, but is not limited to, equipment submittals, construction checklists, training, operating and maintenance data, tests, and test reports to verify compliance with the OPR. When a random sample does not meet the requirement, the CxA will report the failure in the Issues Log. F. Prepare and maintain the Issues Log. G. Prepare and maintain completed construction checklist log. H. Witness systems, assemblies, equipment, and component startup. I. Compile test data, inspection reports, and certificates; include them in the systems manual and commissioning process report. PART 2 - PRODUCTS (Not Used) PART 3 - EXECUTION (Not Used) END OF SECTION 01 9113 GENERAL COMMISSIONING REQUIREMENTS 01 9113 - 3 UDC Bertie Backus Campus - CAUSES Kitchen Addendum-01 Project No.: W16-008 November 20, 2017 THIS PAGE INTENTIONALLY LEFT BLANK GENERAL COMMISSIONING REQUIREMENTS 01 9113 - 4 UDC Causes Kitchen 5171 South Dakota Ave, NE Washington, DC Commissioning of Kitchen Energy Systems, & Plumbing SECTION 23 08 00 FUNDAMENTAL COMMISSIONING OF KITCHEN ENERGY SYSTEMS AND PLUMBING EXCEPT COOKING EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes commissioning process requirements for HVAC&R and plumbing systems, assemblies, and equipment except cooking equipment in kitchen. B. Related Sections: 1. Section 01 91 00 "Commissioning" for general commissioning process requirements. 1.2 DEFINITIONS A. Owner Project Requirements, OPR: Outline of owner expectations. B. Basis of Design, BoD: Outline of Concept, Design Criteria and Equipment/System specifics. C. Commissioning Plan, CxP: Outline of organization, schedule, allocation of resources and documentation of commissioning process. D. CxA: Commissioning Agent: Entity that organizes commissioning. E. CxA: Commissioning Authority: Person who conducts commissioning. F. Engineer of Record, EoR: Engineering design professional. G. Functional Performance Test, FPT: Procedure to verify manufacture, installation, start-up, operation and inter-relation of equipment and systems in which they operate. H. Final Report: Commissioning documentation in entirety incorporating descriptive analysis of commissioning process including but not limited to OPR, BoD, CxP and functional performance tests. I. HVAC&R: Heating, Ventilating, Air Conditioning, and Refrigeration. J. Systems, Subsystems, Equipment, and
Recommended publications
  • Transition to Digital Digital Handbook
    TRANSITION TO DIGITAL DIGITAL HANDBOOK Audio's video issues tion within one audio sample, the channels of audio over a fiber-optic in- There can be advantages to locking preambles present a unique sequence terface. This has since been superseded the audio and video clocks, such as for (which violate the Biphase Markby AES 10 (or MADI, Multichannel editing, especially when the audio and Code) but nonetheless are DC -freeAudio Digital Interface), which sup- video programs are related. Althoughand provide clock recovery. ports serial digital transmission of 28, digital audio equipment may provide 56, or 64 channels over coaxial cable or an analog video input, it is usually bet- Like AES3, but not fiber-optic lines, with sampling rates ter to synchronize both the audio and A consumer version of AES3 -of up to 96kHz and resolution of up to the video to a single higher -frequencycalled S/PDIF, for Sony/Philips Digi-24 bits per channel. The link to the IT source, such as a 10MHz master refer-tal Interface Format (more formallyworld has also been established with ence. This is because the former solu- known as IEC 958 type II, part of IEC- AES47, which specifies a method for tion requires a synchronization circuit60958) - is also widely used. Essen- packing AES3 streams over Asynchro- that will introduce some jitter into thetially identical to AES3 at the protocol nous Transfer Mode (ATM) networks. signal, especially because the video it- level, the interface uses consumer - It's also worth mentioning Musical self may already have some jitter. To ac- friendly RCA jacks and coaxial cable.Instrument Digital Interface (MIDI) for broadcast operations.
    [Show full text]
  • Downloadable Preview
    AES47-2006 (r2011) AES standard for digital audio — Digital input-output interfacing — Transmission of digital audio over asynchronous transfer mode (ATM) networks Published by Audio Engineering Society, Inc. Copyright ©2005 by the Audio Engineering Society Preview only Abstract This document specifies the method of carrying multiple channels of audio in linear PCM or AES3 format in calls across an asynchronous transfer mode (ATM) network to ensure interoperability. The specification includes the method of conveying information concerning the format and sampling frequency of the digital audio signal when setting up the calls. An AES standard implies a consensus of those directly and materially affected by its scope and provisions and is intended as a guide to aid the manufacturer, the consumer, and the general public. The existence of an AES standard does not in any respect preclude anyone, whether or not he or she has approved the document, from manufacturing, marketing, purchasing, or using products, processes, or procedures not in agreement with the standard. Prior to approval, all parties were provided opportunities to comment or object to any provision. Attention is drawn to the possibility that some of the elements of this AES standard or information document may be the subject of patent rights. AES shall not be held responsible for identifying any or all such patents. Approval does not assume any liability to any patent owner, nor does it assumewww.aes.org/standards any obligation whatever to parties adopting the standards document. This document is subject to periodic review and users are cautioned to obtain the latest printing. Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
    [Show full text]
  • Maintaining Audio Quality in the Broadcast/Netcast Facility
    Maintaining Audio Quality in the Broadcast and Netcast Facility 2019 Edition Robert Orban Greg Ogonowski Orban®, Optimod®, and Opticodec® are registered trademarks. All trademarks are property of their respective companies. © Copyright 1982-2019 Robert Orban and Greg Ogonowski. Rorb Inc., Belmont CA 94002 USA Modulation Index LLC, 1249 S. Diamond Bar Blvd Suite 314, Diamond Bar, CA 91765-4122 USA Phone: +1 909 860 6760; E-Mail: [email protected]; Site: https://www.indexcom.com Table of Contents TABLE OF CONTENTS ............................................................................................................ 3 MAINTAINING AUDIO QUALITY IN THE BROADCAST/NETCAST FACILITY ..................................... 1 Authors’ Note ....................................................................................................................... 1 Preface ......................................................................................................................... 1 Introduction ................................................................................................................ 2 The “Digital Divide” ................................................................................................... 3 Audio Processing: The Final Polish ............................................................................ 3 PART 1: RECORDING MEDIA ................................................................................................. 5 Compact Disc ..............................................................................................................
    [Show full text]
  • Immersive 3D Sound Optimization, Transport and Quality Assessment Abderrahmane Smimite
    Immersive 3D sound optimization, transport and quality assessment Abderrahmane Smimite To cite this version: Abderrahmane Smimite. Immersive 3D sound optimization, transport and quality assessment. Image Processing [eess.IV]. Université Paris-Nord - Paris XIII, 2014. English. NNT : 2014PA132031. tel- 01244301 HAL Id: tel-01244301 https://tel.archives-ouvertes.fr/tel-01244301 Submitted on 17 Dec 2015 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Université Paris 13 N◦ attribué par la bibliothèque THÈSE pour obtenir le grade de DOCTEUR DE l’UNVERSITÉ PARIS 13, SORBONNE PARIS CITÉ Discipline : Signaux et Images présentée et soutenue publiquement par Abderrahmane SMIMITE le 25 Juin, 2014 Titre: Immersive 3D sound Optimization, Transport and Quality Assessment Optimisation du son 3D immersif, Qualité et Transmission Jury : Pr. Azeddine BEGHDADI L2TI, Directeur de thèse Pr. Ken CHEN L2TI, Co-Directeur de thèse Dr. Abdelhakim SAADANE Polytech Nantes, Rapporteur Pr. Hossam AFIFI Telecom SudParis, Rapporteur Pr. Younes BENNANI LIPN-CNRS, Examinateur Mr. Pascal CHEDEVILLE Digital Media Solutions, Encadrant Declaration of Authorship I, Abderrahmane SMIMITE , declare that this thesis titled, ’Immersive 3D sound Optimization, Transport and Quality Assessment’ and the work presented in it are my own.
    [Show full text]
  • Aesjournal of the Audio Engineering Society Audio
    JOURNAL OF THE AUDIO ENGINEERING SOCIETY AES AUDIO/ACOUSTICS/APPLICATIONS VOLUME 50 NUMBER 1/2 2002 JANUARY/FEBRUARY CONTENT President’s Message........................................................................................................Garry Margolis 3 PAPERS Fourth-Order Symmetrical Band-Pass Loudspeaker Systems ....................................................................................................Grzegorz P.Matusiak and Andrzej B. Dobrucki 4 The analysis of fourth-order band-pass loudspeaker systems based on the well-known Thiele, Small, and Benson theory is presented using a reactance transformation method. By comparing the acoustic analog circuit with the transfer function obtained from the reactance transformation, the results allow the symmetry condition to be determined. The resulting system has advantages over closed-box and vented-box high-pass systems in terms of power and efficiency. Maximizing Performance from Loudspeaker Ports .......Alex Salvatti, Allan Devantier, and Doug J. Button 19 The low-frequency performance of a loudspeaker is significantly enhanced by the use of tapered ports, but there are numerous trade-offs involving the size of the port and the input and output tapers. Design issues include the effectiveness of heat transfer, amount of turbulence created, air velocity, smoothness of the taper, symmetry of the two tapers, effective mass in the port, and the contribution to the frequency response. Suggested design rules are based on extensive empirical studies. ENGINEERING REPORTS Wavetable Matching of Inharmonic String Tones ............................Clifford So and Andrew B. Horner 46 A new wavetable matching technique for inharmonic music tones, such as a violin with vibrato, shows good spectral matching and adequate frequency resolution. Confirmation with listening tests significantly improves the perceived matching but degrades performance on harmonic trumpet tones compared to simple wavetable matching.
    [Show full text]
  • Audio Sur Ip : Problématiques Et Perspectives D'évolution
    ÉCOLE NATIONALE SUPÉRIEURE LOUIS LUMIÈRE Mémoire de fin d'études AUDIO SUR IP : PROBLÉMATIQUES ET PERSPECTIVES D'ÉVOLUTION Partie Pratique : Projet d'Ingénierie d'un studio polyvalent en audio sur IP Marie-Angélique MENNECIER Directeur interne : Jean ROUCHOUSE Directeur externe : Jean-Marc CHOUVEL Rapporteur : Franck JOUANNY 19 juin 2015 RÉSUMÉ : À l'heure où les réseaux audio sur IP professionnels se développent, une normalisation a été effectuée par le groupe de travail AES X192 afin de permettre leur interopérabilité. L'AES67 pose les bases nécessaires pour un fonctionnement commun, et les principales solutions existant sur le marché de l'audio sur IP professionnel s'y sont conformées depuis. La problématique de ce mémoire est l'analyse des implications techniques de l'audio sur IP et des mécanismes nécessaires à une interopérabilité concrète, tout en proposant une ouverture sur les possibilités de développements futurs de cette technologie protéiforme. Dans un premier temps, nous formulerons quelques rappels sur les réseaux IP qui nous serviront de socle technique pour analyser les protocoles existants, puis comprendre les fondations nécessaires à leur fonctionnement commun. Nous pourrons enfin dégager quels écueils peuvent entraver de futurs développements. mots clés : AoIP, audio sur IP, AES67, Dante, Ravenna, Livewire, interopérabilité, AVB ABSTRACT : At times when audio over IP networks have started growing and thriving, a standardization has been discussed by the AES X192 workgroup to insure that they would be interoperable. In 2013, AES67 defined such rules, and the main audio over IP professional networks have since complied. This dissertation analyzes the technical details of such a technology, how interoperability can be effectively achieved, and how audio over IP may evolve, in the future, from its current protean form.
    [Show full text]
  • EBU Tech 3300S1-2005 the Middleware Report; Suppl. System
    EBU – TECH 3300s Supplement to the Middleware Report System integration in broadcast environments Geneva February 2005 Supplement to the Middleware Report Tech 3300s – E 2 Tech 3300s – E Supplement to the Middleware Report Foreword This document is the final report of the EBU project group on Middleware in Distributed programme Production (P/MDP). It is intended to be of use both to IT people working in broadcasting and to broadcasting people working with IT, and to both managerial and technical in either field. Some parts of it will seem over-simplified and some parts over-complex, but they will be different parts for different people. This is the inevitable consequence of trying to produce such a broadly accessible document. Further, it will be seen differently depending on how far along the path of 'system integration' that the reader's organisation has progressed. It might be a welcome source of information to supplement an existing development or it might be an alarming introduction to what the future holds. The EBU P/MDP Project Group was established in the autumn of 2003 to study the topic of Middleware, as the term 'Middleware' is used extensively in technical discussions but often lacks a clear definition. Triggered by this, the group started out to define Middleware terminology as well as to produce an in-depth study of the problems and the opportunities. In doing so, it became clear that what the group was really studying was 'System Integration Architectures'. The group subsequently gathered Members' experiences and held meetings with manufacturers’ representatives to discuss this topic1.
    [Show full text]
  • Audio Metering
    Audio Metering Measurements, Standards and Practice This page intentionally left blank Audio Metering Measurements, Standards and Practice Eddy B. Brixen AMSTERDAM l BOSTON l HEIDELBERG l LONDON l NEW YORK l OXFORD PARIS l SAN DIEGO l SAN FRANCISCO l SINGAPORE l SYDNEY l TOKYO Focal Press is an Imprint of Elsevier Focal Press is an imprint of Elsevier The Boulevard, Langford Lane, Kidlington, Oxford, OX5 1GB, UK 30 Corporate Drive, Suite 400, Burlington, MA 01803, USA First published 2011 Copyright Ó 2011 Eddy B. Brixen. Published by Elsevier Inc. All Rights Reserved. The right of Eddy B. Brixen to be identified as the author of this work has been asserted in accordance with the Copyright, Designs and Patents Act 1988 No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or any information storage and retrieval system, without permission in writing from the publisher. Details on how to seek permission, further information about the Publisher’s permissions policies and our arrangement with organizations such as the Copyright Clearance Center and the Copyright Licensing Agency, can be found at our website: www.elsevier.com/permissions This book and the individual contributions contained in it are protected under copyright by the Publisher (other than as may be noted herein). Notices Knowledge and best practice in this field are constantly changing. As new research and experience broaden our understanding, changes in research methods, professional practices, or medical treatment may become necessary. Practitioners and researchers must always rely on their own experience and knowledge in evaluating and using any information, methods, compounds, or experiments described herein.
    [Show full text]
  • Low Latency Audio Processing
    Low Latency Audio Processing Yonghao Wang School of Electronic Engineering and Computer Science Queen Mary University of London 2017 Submitted to University of London in partial fulfilment of the requirements for the degree of Doctor of Philosophy Queen Mary University of London 2017 1 Statement of Originality I, Yonghao Wang, confirm that the research included within this thesis is my own work or that where it has been carried out in collaboration with, or supported by others, that this is duly acknowledged below and my contribution indicated. Previously published material is also acknowledged below. I attest that I have exercised reasonable care to ensure that the work is original, and does not to the best of my knowledge break any UK law, infringe any third party’s copyright or other Intellectual Property Right, or contain any confidential material. I accept that the College has the right to use plagiarism detection software to check the electronic version of the thesis. I confirm that this thesis has not been previously submitted for the award of a degree by this or any other university. The copyright of this thesis rests with the author and no quotation from it or information derived from it may be published without the prior written consent of the author. Signature: Date: 28/November/2017 2 Abstract Latency in the live audio processing chain has become a concern for audio engineers and system designers because significant delays can be perceived and may affect synchroni- sation of signals, limit interactivity, degrade sound quality and cause acoustic feedback. In recent years, latency problems have become more severe since audio processing has become digitised, high-resolution ADCs and DACs are used, complex processing is performed, and data communication networks are used for audio signal transmission in conjunction with other traffic types.
    [Show full text]
  • CATALOGUE ISSUE 19 Designers & Manufacturers of Audio Broadcast
    CATALOGUE ISSUE 19 Designers & Manufacturers Of Audio Broadcast Equipment Glensound Electronics Ltd. 6 Brooks Place, Maidstone, Kent, ME14 1HE, England. Tel: +44 (0)1622 753662 Fax: +44 (0)1622 762330 www.glensound.co.uk 2 Index ATM…AES47 (SONET/SDH) 8 GS1U-051 TIME CODE & REFERENCE CLOCK DISTRIBUTION 11 AMPLIFIER GS-COM001 Intercom Unit 11 BELT PACK RANGE 12 GS-FW021 Four Wire Box For Use With Headsets 12 GS-MCA001 Microphone Preamplifier 12 GS-CU004 Commentary System With Two Circuits 13 GS-HA009 Ear Piece Driver/ Headphone Amp 13 GS-HA001 Headphone Amp 13 GS-HA010 Single Input Headphone Amp 14 GS-HA011 Single Input Headphone Amplifier With Input Gain 14 GS-CU005 Two Channel Mixer with Headphone Amp 15 Adjust & Transformer Balanced Inputs GS-POT001 Headphone Pot Box 15 GS-FW008 Four Wire Talkback + Talkback into Headphone Circuit 15 GS-D2A001 Digital To Analogue Converter 16 GS-DDA001 & GS-DDA002 Two & Three Way Digital Distribution 16 Transformers GS-A2D001 Analogue to Digital Converter 16 GS-DIC001 AES3 to S/PDIF Impedance Converter 17 GS-COUGH001 Cough Switch 17 GS-OBLS-1 Loudspeaker Amplifier 17 GS-OBLS-2 Headphone & Loudspeaker Amplifier 17 GS-U2B003 Stereo Unbalanced to Balanced Converter 18 GS-PLI001 Line Ident 18 GS-CAP001 Cough & Pot Box 18 GS-SW001 Audio Switch 18 GS-MCS002 Mic Splitter (1 in 3 out) 18 GR-CM01 Roaming Compressor 19 GR-EQ01 Roaming EQ 19 COMMENTATORS’ EQUIPMENT 2 PART SYSTEMS 20 CAT5 Commentators Equipment 20 Glensound Digital Commentary: GDC-6432 21 GSOC24, GSOC26 & GSOC23 Coaxial Commentators 22 GSOC34 &
    [Show full text]
  • Presentation with Notes
    1 1 2 2 The image shows one of the original Interface Message Processors, which were used for routing packets in the Arpanet. 3 The image shows the interior of a Nine Tiles Superlink node which connected an RS422 interface into a Superlink ring network. (there was also an RS232 version, and plug-in cards for various I/O bus standards). The chipset consists of a Z80 CPU, UV-EPROM, sRAM, and an ASIC which performed a few simple functions such as converting the data between serial and parallel, and writing incoming packets directly into the sRAM. Its connection-oriented routing allowed users to specify the destination of a flow in various ways, including by name and by position in the ring. Two rings could be connected by a “gateway”, and flows could then be routed through the gateway to a destination on the other ring. Information in packet headers to identify the destination was local to each ring or gateway. Signalling was in-band, so when a connection was made to a gateway the protocol to make the connection on the second ring was carried as ordinary data on the first ring. Thus flows were source routed, reducing the amount of information each node needed to keep. When addressing content on a file server, the names of the gateway(s), host, and service simply looked like extra components in the file path. 4 The upper image is of the circuitry in the platform on which Flexilink has been implemented; it contains a Xilinx Spartan 6 SLX45T FPGA, serial flash, dRAM, and physical layer interfaces.
    [Show full text]
  • Preview - Click Here to Buy the Full Publication
    This is a preview - click here to buy the full publication IEC 62379-5-2 ® Edition 1.0 2014-03 INTERNATIONAL STANDARD Common control interface for networked digital audio and video products – Part 5-2: Transmission over networks – Signalling INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE XA ICS 33.160; 35.100 ISBN 978-2-8322-1455-8 Warning! Make sure that you obtained this publication from an authorized distributor. ® Registered trademark of the International Electrotechnical Commission This is a preview - click here to buy the full publication – 2 – IEC 62379-5-2:2014 © IEC 2014 CONTENTS FOREWORD ........................................................................................................................... 5 INTRODUCTION ..................................................................................................................... 7 1 Scope ............................................................................................................................... 8 2 Normative references ....................................................................................................... 8 3 Terms and definitions ....................................................................................................... 8 4 Identification ................................................................................................................... 10 4.1 Byte order ............................................................................................................. 10 4.2 Unit identification .................................................................................................
    [Show full text]