Drills -Metal -Wood -Masonry Drills Selection Charts

DRILLS

Miscellaneous Metals Wooden Materials Masonry Materials Materials S/S PVC

Drill Page Low Carbon Steel High Carbon Steel Stainless steel Non-ferrous metal Aluminium Soft wood Hard wood Plywood & nails Wood Chipboard Glass Plastics Plaster board Cement Fibro Concrete Reinforced Concrete Brick CSR Hebel Stone Granite Marble Ceramics Jobber Drill - Bright • • • • • • • • • • Jobber Drill - Blue • • • • • • • • • • • Jobber Drill - Cobalt • • • • • • • • • • • • • Jobber Drill - TiNite • • • • • • • • • • • Jobber Drill - Viper Bit • • • • • • • • • • Long Series Drill • • • • • • • • • Extra Long Reach • • • • • • • • • Reduced Shank Drill - Bright • • • • • • • • • Reduced Shank Drill - Blue • • • • • • • • • • Panel & Rivet - Bright • • • • Panel & Rivet - Blue • • • • • Panel & Rivet - Cobalt • • • • • • Panel & Rivet - TiNite • • • • • • Wood Bits • • • • • Spade Bits • • • • Auger Bits • • • • Ship Auger Bits • • Multi Purpose Drill • • • • • • • • • • • • • • • • • • • • Masonry Drill • • • • • • • Penetrator Masonry Drill • • • • • • • Glass & Tile Drill • • • Blue Ceram • • • Runner + • • • • • • Twister SDS Multi-fit • • • • • • Twister SDS Plus • • • • • • Booster SDS Plus • • • • • • • • Ultimax SDS Max • • • • • • • • B3Max SDS Max • • • • • • • • Chisels SDS Plus / SDS Max • • • • TCT Core Bits • • • • • • • • Optimal • Effective

www.sutton.com.au Drills Index

Miscellaneous HSS Metals Wooden Materials Masonry Materials Materials Drill Sets - Metric 9 S/S PVC Drill Sets - Imperial 11 Viper 12 TiNite 13 Formula Cobalt 14 Bulk Drills - Metric 15

Drill Page Low Carbon Steel High Carbon Steel Stainless steel Non-ferrous metal Aluminium Soft wood Hard wood Plywood & nails Wood Chipboard Glass Plastics Plaster board Cement Fibro Concrete Reinforced Concrete Brick CSR Hebel Stone Granite Marble Ceramics Bulk Drills - Imperial 16 Jobber Drill - Bright • • • • • • • • • • Jobber Drill - Blue • • • • • • • • • • • Long Series Drills 17 Jobber Drill - Cobalt • • • • • • • • • • • • • Extra Long Reach Drills 18 Jobber Drill - TiNite • • • • • • • • • • • Jobber Drill - Viper Bit • • • • • • • • • • Reduced Shank Drills - 10mm 19 Long Series Drill • • • • • • • • • Reduced Shank Drills - 12.5mm 20 Extra Long Reach • • • • • • • • • Reduced Shank Drill - Bright • • • • • • • • • Reduced Shank Sets 21 Reduced Shank Drill - Blue • • • • • • • • • • Panel & Rivet Drills - Carded 22 Panel & Rivet - Bright • • • • Panel & Rivet Drills - Bulk 23 Panel & Rivet - Blue • • • • • Panel & Rivet - Cobalt • • • • • • Panel & Rivet - TiNite • • • • • • Timber Wood Bits • • • • • Wood Bits 24 Spade Bits • • • • Auger Bits • • • • Spade Bits 25 Ship Auger Bits • • Auger Bits 26 Multi Purpose Drill • • • • • • • • • • • • • • • • • • • • Masonry Drill • • • • • • • Masonry Penetrator Masonry Drill • • • • • • • Glass & Tile Drill • • • Multi-Purpose Drills 27 Blue Ceram • • • Masonry Drills 28 Runner + • • • • • • Twister SDS Multi-fit • • • • • • Penetrator Drills 29 Twister SDS Plus • • • • • • Blue Ceram Diamond Core Bits 31 Booster SDS Plus • • • • • • • • Ultimax SDS Max • • • • • • • • Glass & Tile Drills 32 B3Max SDS Max • • • • • • • • Runner + SDS Plus Drills 33 Chisels SDS Plus / SDS Max • • • • Twister SDS Multi-fit Drills TCT Core Bits • • • • • • • 34 • Optimal • Effective Twister SDS Plus Drills 35 Booster SDS Plus Drills 36 B3Max SDS Max Drills 37 Ultimax SDS Max Drills 38 Chisels - SDS Plus / SDS Max 39 TCT Core Bits 40 7 www.sutton.com.au SM1 - Bright SM1 - Blue SM1 - TiNite SM1 - Cobalt SM99

SM2 - Bright SM2 - Blue SM2 - TiNite SM2 - Cobalt SM22R

SM3 - Bright SM3 - Blue SM3 - TiNite SM3 - Cobalt SM25R

SM30 - Bright SM30 - Blue SM41 - Bright SM41 - Blue SM4 - Bright

V2M V3M SLV7M SLV10M SLV13M

SM8 SM7 SRK-20 SRK-M2 SRK-M3

www.sutton.com.au Drills Sets Metric

Bright Bits Protective Case Anti Theft Locking Colour Coded Hanging Slot Ideal for storage Quick and easy General purpose drill bit designed for Mechanism For easy storage machine and hand held drilling in a and transportation Reduces shrinkage. identification. and display. wide range of ferrous & nonferrous of your bits. materials. Blue Bits The blue finish reduces chip build up on the cutting edge and is a better choice when drilling ferrous materials. TiN Bits Lasts up to 6 times longer than standard HSS drill bits. Cobalt HSS Bits For drilling stainless steel and other tough materials.

Catalogue Code Size Ref. Catalogue Code D101 D102 D103 D109 Discount Group A1202 A1202 A1216 A0404 Surface Finish Bright Blue TiN Colour Temp D100 0100 Material HSS HSS HSS Cobalt Point Type & Angle 118º Standard 118º Standard Web Thin 118º > 1/8” 135º Split > 1/8” Item # Packaging Set Set Set Set Size Ref. Contents Case Pieces Item # Item # Item # Item # SM1 1.0 – 6.5mm x 0.5 ABS 12 D101 SM1 D102 SM1 D103 SM1 SM1 2.0 – 6.5mm x 0.5 ABS 10 D109 SM1 SM2 1.0 – 10.0mm x 0.5 ABS 19 D101 SM2 D102 SM2 D103 SM2 SM2 2.0 – 10.0mm x 0.5 ABS 17 D109 SM2 SM22R 1.0 – 10.0mm x 0.5 ABS 22 D101 SM22R (Plus 11.0, 12.0 & 13.0mm with 10.0mm Shanks) SM25R 1.0 – 13.0mm x 0.5 ABS 25 D101 SM25R (10.5 – 13.0mm x 10.0mm Shanks) SM3 1.0 – 13.0mm x 0.5 ABS 25 D101 SM3 D102 SM3 D103 SM3 SM3 2.0 – 13.0mm x 0.5 ABS 23 D109 SM3 SM4 1.0 – 6.5mm x 0.5 Plastic 12 D101 SM4 SM8 1.0 – 3.0mm x 0.25 Quad Pack 29 D101 SM8 D102 SM8 3.5 – 13.0mm x 0.5 (Suits SM7 Stand) SM30 1.0mm – 5.9mm x 0.1 Metal 50 D101 SM30 D102 SM30 SM41 6.0mm – 10.0mm x 0.1 Metal 41 D101 SM41 D102 SM41 SM99 1.0 – 10.0mm x 0.1 100 D102 SM99 (Plus 10.5, 10.9, 11.0, 11.5, Plastic 11.9, 12.0, 12.5, 12.9, 13.0mm)

Drill Stands (Z0204) SM7 1.0 – 3.0mm x 0.25, Metal 1 D101 SM7 3.5 – 13.0mm x 0.5

Refill Kits SRKM2 1.5mm – 3.5mm x 0.5mm Tray 5 D101 SRKM2 SRKM3 1.5, 2.0, 3.0, 4.0, 5.0mm Tray 5 D101 SRKM3 SRK20 Drill Refill Kit Merchandiser 20 D101 SRK20 5 each: SRK-2, SRK-3, SMRK2, SMRK3

Viper Sets (Made in New Zealand) D105 V2M 1.0mm – 10.0mm x 0.5mm Metal 19 D105 V2M V3M 1.0mm – 13.0mm x 0.5mm 25 D105 V3M (10.5-13.0mm x 10.0mm Shanks) Metal SLV7M 1.5, 2.0, 3.0, 4.0, 5.0, 5.5, 6.0mm Plastic 7 D105 SLV7M SLV10M 1.0mm – 10.0mm x 1.0mm Plastic 10 D105 SLV10M SLV13M 1.5mm – 6.5mm x 0.5mm Plastic 13 D105 SLV13M + 3.2mm, 4.8mm

9 www.sutton.com.au S1 - Bright S1 - Blue S1 - TiNite S1 - Cobalt S25R - Bright

S2 - Bright S2 - Blue S2 - TiNite S2 - Cobalt S3BR - Bright

S3 - Bright S3 - Blue S3 - TiNite S3 - Cobalt S4 - Bright

S31 S3B - Bright S3B - Blue S30

V2 V3 SLV7 SLV10 SLV11

SLV13 WV14 WV38 S8 S7

SRK-1 SRK-2 SRK-3 SRK-20 10

www.sutton.com.au Drills Sets Imperial

Protective Case Anti Theft Locking Colour Coded Hanging Slot Bright Bits Ideal for storage Mechanism Quick and easy For easy storage General purpose drill bit designed for and transportation Reduces shrinkage. identification. and display. machine and hand held drilling in a of your bits. wide range of ferrous & nonferrous materials. Blue Bits The blue finish reduces chip build up on the cutting edge and is a better choice when drilling ferrous materials. TiN Bits Lasts up to 6 times longer than standard HSS drill bits. Cobalt HSS Bits For drilling stainless steel and other tough materials.

Catalogue Code Size Ref. Catalogue Code D101 D102 D103 D109 Discount Group A1202 A1202 A1216 A0404 Surface Finish Bright Blue TiN Colour Temp D100 0100 Material HSS HSS HSS Cobalt Point Type & Angle 118º Standard 118º Standard Web Thin 118º > 1/8” 135º Split > 1/8” Item # Packaging Set Set Set Set Size Ref. Contents Case Pieces Item # Item # Item # Item # S1 1/16 – 1/4 x 64ths ABS 13 D101 S1 D102 S1 D103 S1 D109 S1 S2 1/16 – 3/8 x 64ths ABS 21 D101 S2 D102 S2 D103 S2 D109 S2 S25R 1/16 – 3/8 x 64ths ABS 25 D101 S25R (Plus 13/32, 7/16, 15/32 & 1/2 with 3/8 Shanks) S3 1/16 – 1/2 x 64ths ABS 29 D101 S3 D102 S3 D103 S3 D109 S3 S3B 1/16 – 1/2 x 32nds ABS 15 D101 S3B D102 S3B S3BR 1/16 – 1/2 x 32nds ABS 15 D101 S3BR (13/32-1/2 x 3/8 Shanks) S4 1/16 – 1/4 x 64ths Plastic 13 D101 S4 S8 1/16 – 1/2 x 64ths (Suits S7 Stand) Quad Pack 29 D102 S8 Wire Gauge S30 #1 – #60 Wire Gauge Metal 60 D101 S30 S31 #61 – #80 Wire Gauge Plastic 20 D101 S31 Drill Stands (Z0204) S7 1/16 – 1/2 x 64ths Metal 1 D101 S7

Refill Kits SRK1 1/16, 3/32, 1/8 Tray 3 D101 SRK1 SRK2 1/16 – 1/8 x 1/64 Tray 5 D101 SRK2 SRK3 1/16 – 3/16 x 1/32 Tray 5 D101 SRK3 SRK20 Drill Refill Kit Merchandiser 20 D101 SRK20 5 each: SRK-2, SRK-3, SRKM2, SRKM3

Viper Sets D105 V2 1/16 – 3/8 x 1/64 Metal 21 D105 V2 V3 1/16 – 1/2 x 1/64 Metal 29 D105 V3 (25/64 – 1/2 x 3/8 Shanks) SLV7 1/16 – 1/4 x 1/32 Plastic 7 D105 SLV7 SLV10 1/16 – 5/32 x 1/64 Plastic 10 D105 SLV10 + 3/16, 7/32, 1/4 SLV11 1/16 – 3/8 x 1/32 Plastic 11 D105 SLV11 SLV13 1/16 – 1/4 x 1/64 Plastic 13 D105 SLV13 WV14 1/16, 5/64, 3/32, 7/64, 1/8, Plastic 10 D105 WV14 9/64, 5/32, 3/16, 7/32, 1/4 Wallet WV38 1/16, 3/32, 1/8, 5/32, 3/16, Plastic 10 D105 WV38 7/32, 1/4, 9/32, 5/16, 3/8 Wallet

11 www.sutton.com.au Drills Viper 118° Split Point Minimises General purpose drill bit designed wandering when for machine and hand held drilling starting. in a wide range of ferrous & nonferrous materials.

Reduced Shank Drill sizes above 10mm & 3/8” feature reduced shanks to suit 10mm drill chucks.

Application DIY Trade Automotive Electrician Plumber Carpenter Made from HSS General Contractor Stronger and out performs a Woodworker conventional drill bit. Metalworker Machine Shop MRO

Catalogue Code Size Ref. Catalogue Code D105 Catalogue Code D105 Discount Group A0410 Discount Group A0410 Surface Finish Bright Surface Finish Bright D100 0100 Material HSS Material HSS Point Type & Angle Viper 118º > 3.5mm Point Type & Angle Viper 118º > 9/64” Item # Packaging Carded Packaging Carded Size Ref. Diameter O/A Flute Shank Item # Diameter O/A Flute mm Length Length Size Ref. inch mm Length Length Shank Item # 0100 1.00 34 12 D105 0100 0159 1/16 1.59 1-7/8 7/8 D105 0159 0150 1.50 40 18 D105 0150 0198 5/64 1.98 2 1 D105 0198 0200 2.00 49 24 D105 0200 0238 3/32 2.38 2-1/4 1-1/4 D105 0238 0250 2.50 57 30 D105 0250 0278 7/64 2.78 2-5/8 1-1/2 D105 0278 0300 3.00 61 33 D105 0300 0318 1/8 3.17 2-3/4 1-5/8 D105 0318 0350 3.50 70 39 D105 0350 0357 9/64 3.57 2-7/8 1-3/4 D105 0357 0400 4.00 75 43 D105 0400 0397 5/32 3.97 3-1/4 2-1/8 D105 0397 0450 4.50 80 47 D105 0450 0437 11/64 4.37 3-1/4 2-1/8 D105 0437 0500 5.00 86 52 D105 0500 0476 3/16 4.76 3-1/2 2-5/16 D105 0476 0550 5.50 93 57 D105 0550 0516 13/64 5.16 3-5/8 2-7/16 D105 0516 0600 6.00 93 57 D105 0600 0556 7/32 5.56 3-3/4 2-1/2 D105 0556 0650 6.50 101 63 D105 0650 0595 15/64 5.95 3-7/8 2-5/8 D105 0595 0700 7.00 109 69 D105 0700 0635 1/4 6.35 4 2-3/4 D105 0635 0750 7.50 109 69 D105 0750 0676 17/64 6.75 4-1/8 2-7/8 D105 0676 0800 8.00 117 75 D105 0800 0714 9/32 7.14 4-1/4 2-15/16 D105 0714 0850 8.50 117 75 D105 0850 0754 19/64 7.54 4-3/8 3-1/16 D105 0754 0900 9.00 125 81 D105 0900 0794 5/16 7.94 4-1/2 3-3/16 D105 0794 0950 9.50 125 81 D105 0950 0833 21/64 8.33 4-5/8 3-5/16 D105 0833 1000 10.00 133 87 D105 1000 0873 11/32 8.73 4-3/4 3-7/16 D105 0873 1050* 10.50 133 87 10 D105 1050 0913 23/64 9.13 4-7/8 3-1/2 D105 0913 1100* 11.00 142 94 10 D105 1100 0953 3/8 9.52 5 3-5/8 D105 0953 1150* 11.50 142 94 10 D105 1150 0992* 25/64 9.92 5-1/8 3-3/4 3/8 D105 0992 1200* 12.00 151 101 10 D105 1200 1032* 13/32 10.32 5-1/4 3-7/8 3/8 D105 1032 1250* 12.50 151 101 10 D105 1250 1072* 27/64 10.72 5-3/8 3-15/16 3/8 D105 1072 1300* 13.00 151 101 10 D105 1300 1111* 7/16 11.11 5-1/2 4-1/16 3/8 D105 1111 1151* 29/64 11.51 5-5/8 4-3/16 3/8 D105 1151 Merchandisers** Pieces 1191* 15/32 11.91 5-3/4 4-5/16 3/8 D105 1191 MER2 SM116 Single Pack Drill Bits, Metric 116 D105 MER2 1231* 31/64 12.30 5-7/8 4-3/8 3/8 D105 1231 10 each 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0 1269* 1/2 12.70 6 4-1/2 3/8 D105 1269 5 each 4.5, 5.0, 5.5, 6.0, 6.5 3 each 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0 Merchandisers** Pieces MER3 S98 Single Pack Drill Bits, Imperial 98 D105 MER3 5 each 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3 each 11/64, 3/16, 1/4, 5/16, 2 each 13/64, 7/32, 15/64, 17/64, 9/32, 19/64, 3/8,21/64, 11/32, 23/64, 25/64, 13/32, 27/64, 7/16, 29/64, 15/32, 31/64, 1/2

*Viper Bit have 10mm reduced shank for sizes >10mm. 12 **Please refer to merchandiser section for individual codes when ordering.

www.sutton.com.au Drills TiNite 118° Web Thinned Point Lasts up to 6 times longer than standard HSS drill bits. Reduces the For drilling metal and harder, tougher alloy steel. amount of thrust required.

Precision Ground Flute Offers high accuracy drilling and fast chip removal. Drill Bit 8.0 mm Application DIY Ti Nite High speed steel for drilling metals. Industrial tradesman quality Trade Automotive ® Coated Electrician Surface Finish Plumber Titanium Nitride Carpenter reduces friction and General Contractor keeps the cutting Woodworker edge sharper. Metalworker Machine Shop MRO

Catalogue Code Size Ref. Catalogue Code D106 Catalogue Code D106 Discount Group A0416 Discount Group A0416 Surface Finish TiNite Surface Finish TiNite D100 0100 Material HSS Material HSS Point Type & Angle Web Thin 118º > 3mm Point Type & Angle Web Thin 118º > 1/8” Item # Packaging Carded Packaging Carded Diameter O/A Flute Diameter O/A Flute Size Ref. mm Length Length Item # Size Ref. inch mm Length Length Item # 0100 1.00 34 12 D106 0100 0159 1/16 1.59 1-7/8 7/8 D106 0159 0150 1.50 40 18 D106 0150 0198 5/64 1.98 2 1 D106 0198 0200 2.00 49 24 D106 0200 0238 3/32 2.38 2-1/4 1-1/4 D106 0238 0250 2.50 57 30 D106 0250 0278 7/64 2.78 2-5/8 1-1/2 D106 0278 0300 3.00 61 33 D106 0300 0318 1/8 3.17 2-3/4 1-5/8 D106 0318 0350 3.50 70 39 D106 0350 0357 9/64 3.57 2-7/8 1-3/4 D106 0357 0400 4.00 75 43 D106 0400 0397 5/32 3.97 3-1/4 2-1/8 D106 0397 0450 4.50 80 47 D106 0450 0437 11/64 4.37 3-1/4 2-1/8 D106 0437 0500 5.00 86 52 D106 0500 0476 3/16 4.76 3-1/2 2-5/16 D106 0476 0550 5.50 93 57 D106 0550 0516 13/64 5.16 3-5/8 2-7/16 D106 0516 0600 6.00 93 57 D106 0600 0556 7/32 5.56 3-3/4 2-1/2 D106 0556 0650 6.50 101 63 D106 0650 0595 15/64 5.95 3-7/8 2-5/8 D106 0595 0700 7.00 109 69 D106 0700 0635 1/4 6.35 4 2-3/4 D106 0635 0750 7.50 109 69 D106 0750 0676 17/64 6.75 4-1/8 2-7/8 D106 0676 0800 8.00 117 75 D106 0800 0714 9/32 7.14 4-1/4 2-15/16 D106 0714 0850 8.50 117 75 D106 0850 0754 19/64 7.54 4-3/8 3-1/16 D106 0754 0900 9.00 125 81 D106 0900 0794 5/16 7.94 4-1/2 3-3/16 D106 0794 0950 9.50 125 81 D106 0950 0833 21/64 8.33 4-5/8 3-5/16 D106 0833 1000 10.00 133 87 D106 1000 0873 11/32 8.73 4-3/4 3-7/16 D106 0873 1050 10.50 133 87 D106 1050 0913 23/64 9.13 4-7/8 3-1/2 D106 0913 1100 11.00 142 94 D106 1100 0953 3/8 9.52 5 3-5/8 D106 0953 1150 11.50 142 94 D106 1150 0992 25/64 9.92 5-1/8 3-3/4 D106 0992 1200 12.00 151 101 D106 1200 1032 13/32 10.32 5-1/4 3-7/8 D106 1032 1250 12.50 151 101 D106 1250 1072 27/64 10.72 5-3/8 3-15/16 D106 1072 1300 13.00 151 101 D106 1300 1111 7/16 11.11 5-1/2 4-1/16 D106 1111 1151 29/64 11.51 5-5/8 4-3/16 D106 1151 1191 15/32 11.91 5-3/4 4-5/16 D106 1191 1231 31/64 12.30 5-7/8 4-3/8 D106 1231 1269 1/2 12.70 6 4-1/2 D106 1269

13 www.sutton.com.au Drills Formula Cobalt 135° Split Point Enables accurate Industrial quality for drilling stainless steel positioning and less and other tough materials. drilling pressure.

Cobalt Alloyed The 5% cobalt formula

Formula improves abrasive & heat resistance, for increased strength at higher drilling 8.0 temperatures. mm Cobalt Application DIY Co.high speed steel for drilling metal, stainless/high tensile High performance drill bit Trade Automotive Electrician Plumber Carpenter Surface Finish General Contractor Colour tempered finish Woodworker enables identification of Metalworker cobalt drills. Machine Shop MRO

Catalogue Code Size Ref. Catalogue Code D108 Catalogue Code D108 Discount Group A0404 Discount Group A0404 Surface Finish Colour Temp Surface Finish Colour Temp D100 0100 Material Cobalt Material Cobalt Point Type & Angle 135º Split > 2mm Point Type & Angle 135º Split > 5/64 ItemItem ## Packaging Carded Packaging Carded Diameter O/A Flute Diameter O/A Flute Size Ref. mm Length Length Item # Size Ref. inch mm Length Length Item # 0100 1.00 34 12 D108 0100 0159 1/16 1.59 1-7/8 7/8 D108 0159 0150 1.50 40 18 D108 0150 0198 5/64 1.98 2 1 D108 0198 0200 2.00 49 24 D108 0200 0238 3/32 2.38 2-1/4 1-1/4 D108 0238 0250 2.50 57 30 D108 0250 0278 7/64 2.78 2-5/8 1-1/2 D108 0278 0300 3.00 61 33 D108 0300 0318 1/8 3.17 2-3/4 1-5/8 D108 0318 0350 3.50 70 39 D108 0350 0357 9/64 3.57 2-7/8 1-3/4 D108 0357 0400 4.00 75 43 D108 0400 0397 5/32 3.97 3-1/4 2-1/8 D108 0397 0450 4.50 80 47 D108 0450 0437 11/64 4.37 3-1/4 2-1/8 D108 0437 0500 5.00 86 52 D108 0500 0476 3/16 4.76 3-1/2 2-5/16 D108 0476 0550 5.50 93 57 D108 0550 0516 13/64 5.16 3-5/8 2-7/16 D108 0516 0600 6.00 93 57 D108 0600 0556 7/32 5.56 3-3/4 2-1/2 D108 0556 0650 6.50 101 63 D108 0650 0595 15/64 5.95 3-7/8 2-5/8 D108 0595 0700 7.00 109 69 D108 0700 0635 1/4 6.35 4 2-3/4 D108 0635 0750 7.50 109 69 D108 0750 0676 17/64 6.75 4-1/8 2-7/8 D108 0676 0800 8.00 117 75 D108 0800 0714 9/32 7.14 4-1/4 2-15/16 D108 0714 0850 8.50 117 75 D108 0850 0754 19/64 7.54 4-3/8 3-1/16 D108 0754 0900 9.00 125 81 D108 0900 0794 5/16 7.94 4-1/2 3-3/16 D108 0794 0950 9.50 125 81 D108 0950 0833 21/64 8.33 4-5/8 3-5/16 D108 0833 1000 10.00 133 87 D108 1000 0873 11/32 8.73 4-3/4 3-7/16 D108 0873 1050 10.50 133 87 D108 1050 0913 23/64 9.13 4-7/8 3-1/2 D108 0913 1100 11.00 142 94 D108 1100 0953 3/8 9.52 5 3-5/8 D108 0953 1150 11.50 142 94 D108 1150 0992 25/64 9.92 5-1/8 3-3/4 D108 0992 1200 12.00 151 101 D108 1200 1032 13/32 10.32 5-1/4 3-7/8 D108 1032 1250 12.50 151 101 D108 1250 1072 27/64 10.72 5-3/8 3-15/16 D108 1072 1300 13.00 151 101 D108 1300 1111 7/16 11.11 5-1/2 4-1/16 D108 1111 1151 29/64 11.51 5-5/8 4-3/16 D108 1151 1191 15/32 11.91 5-3/4 4-5/16 D108 1191 1231 31/64 12.30 5-7/8 4-3/8 D108 1231 1269 1/2 12.70 6 4-1/2 D108 1269 Merchandisers** Pieces MER1 SCO-22 Imperial - Cobalt 22 D108 MER1 2 each 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 7/16, 1/2

14 **Please refer to merchandiser section for individual codes when ordering.

www.sutton.com.au Drills Bulk Pack, Metric

General purpose drill bit designed for machine and hand held drilling in a wide range of ferrous & nonferrous materials. 118° Standard Point Common point for general purpose applications.

Parallel Shank Precision engineering for accurate hole size.

Application DIY Trade Made from HSS Automotive Constructed from M2 Electrician high speed steel offering the best combination of Plumber strength, heat & wear Carpenter resistance. General Contractor Woodworker Metalworker Machine Shop MRO

Catalogue Code Size Ref. Catalogue Code D101 Discount Group A0402 Surface Finish Bright D100 0100 Material HSS Point Type & Angle STD 118º Item # Packaging Bulk 10 (5 >7mm) O/A Flute Size ref Diameter Length Length Item # 0050 0.50 22 6 D101 0050 0100 1.00 34 12 D101 0100 0150 1.50 40 18 D101 0150 0200 2.00 49 24 D101 0200 0250 2.50 57 30 D101 0250 0300 3.00 61 33 D101 0300 0350 3.50 70 39 D101 0350 0400 4.00 75 43 D101 0400 0450 4.50 80 47 D101 0450 0500 5.00 86 52 D101 0500 0550 5.50 93 57 D101 0550 0600 6.00 93 57 D101 0600 0650 6.50 101 63 D101 0650 0700 7.00 109 69 D101 0700 0750 7.50 109 69 D101 0750 0800 8.00 117 75 D101 0800 0850 8.50 117 75 D101 0850 0900 9.00 125 81 D101 0900 0950 9.50 125 81 D101 0950 1000 10.00 133 87 D101 1000 1050 10.50 133 87 D101 1050 1100 11.00 142 94 D101 1100 1150 11.50 142 94 D101 1150 1200 12.00 151 101 D101 1200 1250 12.50 151 101 D101 1250 1300 13.00 151 101 D101 1300

15 www.sutton.com.au Drills Bulk Pack, Imperial

General purpose drill bit designed for machine and hand held drilling in a wide range of ferrous & nonferrous 118° Standard Point materials. Common point for general purpose applications.

Parallel Shank Precision engineering for accurate hole size.

Application DIY Trade Automotive Made from HSS Electrician Constructed from M2 Plumber high speed steel offering Carpenter the best combination of strength, heat & wear General Contractor resistance. Woodworker Metalworker Machine Shop MRO

Catalogue Code Size Ref. Catalogue Code D101 D104 Discount Group A0402 A0402 Surface Finish Bright Bright D100 0100 Material HSS HSS Point Type & Angle STD 118º STD 118º Item # Packaging Bulk 10 (5 >9/32) Bulk Hang10 (5 >5/32) Diameter O/A Flute Size Ref. inch mm Length Length Item # Item # 0039 1/64 0.40 3/4 3/16 D101 0039 0079 1/32 0.79 1-3/8 1/2 D101 0079 0119 3/64 1.19 1-3/4 3/4 D101 0119 0159 1/16 1.59 1-7/8 7/8 D101 0159 D104 0159 0198 5/64 1.98 2 1 D101 0198 D104 0198 0238 3/32 2.38 2-1/4 1-1/4 D101 0238 D104 0238 0278 7/64 2.78 2-5/8 1-1/2 D101 0278 D104 0278 0318 1/8 3.17 2-3/4 1-5 /8 D101 0318 D104 0318 0357 9/64 3.57 2-7/8 1-3/4 D101 0357 D104 0357 0397 5/32 3.97 3-1/4 2-1/8 D101 0397 D104 0397 0437 11/64 4.37 3-1/4 2-1/8 D101 0437 0476 3/16 4.76 3-1/2 2-5/16 D101 0476 D104 0476 0516 13/64 5.16 3-5/8 2-7/16 D101 0516 0556 7/32 5.56 3-3/4 2-1/2 D101 0556 0595 15/64 5.95 3-7/8 2-5/8 D101 0595 0635 1/4 6.35 4 2-3/4 D101 0635 D104 0635 0676 17/64 6.75 4-1/8 2-7/8 D101 0676 0714 9/32 7.14 4-1/4 2-15/16 D101 0714 0754 19/64 7.54 4-3/8 3-1/16 D101 0754 0794 5/16 7.94 4-1/2 3-3/16 D101 0794 0833 21/64 8.33 4-5/8 3-5/16 D101 0833 0873 11/32 8.73 4-3/4 3-7/16 D101 0873 0913 23/64 9.13 4-7/8 3-1/2 D101 0913 0953 3/8 9.52 5 3-5/8 D101 0953 0992 25/64 9.92 5-1/8 3-3/4 D101 0992 1032 13/32 10.32 5-1/4 3-7/8 D101 1032 1072 27/64 10.72 5-3/8 3-15/16 D101 1072 1111 7/16 11.11 5-1/2 4-1/16 D101 1111 1151 29/64 11.51 5-5/8 4-3/16 D101 1151 1191 15/32 11.91 5-3/4 4-5/16 D101 1191 1231 31/64 12.30 5-7/8 4-3/8 D101 1231 1269 1/2 12.70 6 4-1/2 D101 1269

www.sutton.com.au Drills Long Series

118° Standard Point Offers longer flute & overall length than standard drill Common point for bits. Ideal for drilling deeper holes. general purpose applications.

Finish The blue finish reduces chip build up on the cutting edge and Dr il l Bit Dr il l Bit is a better choice when drilling 8.0 1" mm 4 ferrous materials. 6.35 mm Metric Long Series High speed steel for drilling metal wood plastic Im perial Long Series High speed steel for drilling metal wood plastic Application DIY / / Trade / / Automotive Precision Electrician Ground Flute Plumber Designed for fast chip Carpenter removal. General Contractor Woodworker Metalworker Machine Shop MRO

Catalogue Code Size Ref. Catalogue Code D110 Catalogue Code D110 Discount Group A0502 Discount Group A0502 Surface Finish Blue >3mm Surface Finish Blue >3mm D100 0100 Material HSS Material HSS Point Type & Angle 118º Standard Point Type & Angle 118º Standard Item # Packaging Carded Packaging Carded O/A Flute O/A Flute Size Ref. Diameter Length Length Item # Size Ref. Diameter Length Length Item # 0200 2.00* 108 57 D110 0200 0159 1/16* 1.59 3 1-3/4 D110 0159 0250 2.50* 117 64 D110 0250 0198 5/64* 1.98 3-3/4 2 D110 0198 0300 3.00 130 70 D110 0300 0238 3/32* 2.38 4-1/4 2-1/4 D110 0238 0330 3.30 137 76 D110 0330 0278 7/64* 2.78 4-5/8 2-1/2 D110 0278 0350 3.50 137 76 D110 0350 0318 1/8 3.17 5-1/8 2-3/4 D110 0318 0400 4.00 146 86 D110 0400 0357 9/64 3.57 5-3/8 3 D110 0357 0450 4.50 146 86 D110 0450 0397 5/32 3.97 5-3/8 3 D110 0397 0500 5.00 152 92 D110 0500 0437 11/64 4.37 5-3/4 3-3/8 D110 0437 0550 5.50 152 92 D110 0550 0476 3/16 4.76 5-3/4 3-3/8 D110 0476 0600 6.00 156 95 D110 0600 0516 13/64 5.16 6 3-5/8 D110 0516 0650 6.50 159 98 D110 0650 0556 7/32 5.56 6 3-5/8 D110 0556 0700 7.00 159 98 D110 0700 0595 15/64 5.95 6-1/8 3-3/4 D110 0595 0750 7.50 162 102 D110 0750 0635 1/4 6.35 6-1/8 3-3/4 D110 0635 0800 8.00 165 105 D110 0800 0676 17/64 6.75 6-1/4 3-7/8 D110 0676 0850 8.50 165 105 D110 0850 0714 9/32 7.14 6-1/4 3-7/8 D110 0714 0900 9.00 171 105 D110 0900 0754 19/64 7.54 6-3/8 4 D110 0754 0950 9.50 171 105 D110 0950 0794 5/16 7.94 6-3/8 4 D110 0794 1000 10.00 178 111 D110 1000 0833 21/64 8.33 6-1/2 4-1/8 D110 0833 1050 10.50 184 117 D110 1050 0873 11/32 8.73 6-1/2 4-1/8 D110 0873 1100 11.00 184 117 D110 1100 0913 23/64 9.13 6-3/4 4-1/4 D110 0913 1150 11.50 184 117 D110 1150 0953 3/8 9.52 6-3/4 4-1/4 D110 0953 1200 12.00 197 121 D110 1200 0992 25/64 9.92 7 4-3/8 D110 0992 1250 12.50 197 121 D110 1250 1032 13/32 10.32 7 4-3/8 D110 1032 1300 13.00 197 121 D110 1300 1072 27/64 10.72 7-1/4 4-5/8 D110 1072 1111 7/16 11.11 7-1/4 4-5/8 D110 1111 1151 29/64 11.51 7-1/2 4-3/4 D110 1151 1191 15/32 11.91 7-1/2 4-3/4 D110 1191 1231 31/64 12.30 7-3/4 4-3/4 D110 1231 1269 1/2 12.70 7-3/4 4-3 /4 D110 1269

* Bright Finish < 3mm. Note: Bulk packs available on request, subject to lead times. 17 www.sutton.com.au Drills Extra Long Reach

300mm overall length for drilling deep holes in 118° Standard Point long reach applications. Common point for general purpose applications.

Made from HSS Constructed from M2 high speed steel offering the best Drill B 1" combination of strength, heat 4 6.35 mm & wear resistance. it Unique self centering point High speed steel for drilling metal, wood, plastic Imperial Extra-Long Series Masonry Application B

it DIY Trade Automotive Bright Bits Electrician General purpose drill bit Plumber designed for machine Carpenter and hand held drilling in General Contractor a wide range of ferrous & Woodworker nonferrous materials. Metalworker Machine Shop MRO

Catalogue Code Size Ref. Catalogue Code D187 Discount Group A0502 Surface Finish Bright D100 0100 Material HSS Point Type & Angle STD 118º Item # Packaging Carded Diameter O/A Flute Size Ref. inch mm Length Length Item # 0318 1/8 3.17 300 35 D187 0318 0476 3/16 4.76 300 57 D187 0476 0635 1/4 6.35 300 72 D187 0635 0794 5/16 7.94 300 86 D187 0794 0953 3/8 9.52 300 95 D187 0953 1111 7/16 11.11 300 106 D187 1111 1269 1/2 12.70 300 117 D187 1269

18 Note: Bulk packs available on request, subject to lead times.

www.sutton.com.au Drills Reduced Shank, 10mm or 3/8” 118° Standard Point Common point for general purpose applications. Designed to increase the drilling capacity of drill chucks and for slow-speed (350RPM or less), Reduced Shank large scale boring. Drill sizes above 10mm & 3/8” feature reduced shanks to suit 10mm drill chucks.

Application Precision Ground Flute Bright cutting edge with DIY blue flute making it a Trade better choice when drilling Industrial Application ferrous materials. Automotive Metalworker Machine Shop MRO

Catalogue Code Size Ref. Catalogue Code D105 D120 Discount Group A0410 A0906 Surface Finish Bright Blue D100 0100 Material HSS HSS Point Type & Angle Viper 118º Std 118º Item # Packaging Carded Vinyl Sleeve O/A Flute Size Ref. Diameter Length Length Shank Item # Item # 10 mm 3/8 Shank 0992 25/64 9.92 5-1/8 3-3/4 3/8 D105 0992 1032 13/32 10.32 5-1/4 3-7/8 3/8 D105 1032 1050 10.50 133 87 10 D105 1050 1072 27/64 10.72 5-3/8 3-15/16 3/8 D105 1072 1100 11.00 142 94 10 D105 1100 1111 7/16 11.11 5-1/2 4-1/16 3/8 D105 1111 1150 11.50 142 94 10 D105 1150 1151 29/64 11.51 5-5/8 4-3/16 3/8 D105 1151 1191 15/32 11.91 5-3/4 4-5/16 3/8 D105 1191 1200 12.00 151 101 10 D105 1200 1231 31/64 12.30 5-7/8 4-3/8 3/8 D105 1231 1250 12.50 151 101 10 D105 1250 1269 1/2 12.70 6 4-1/2 3/8 D105 1269 1300 13.00 151 101 10 D105 1300 1429 9/16 14.29 6 3-3/8 3/8 D120 1429 1588 5/8 15.87 6 3-3/8 3/8 D120 1588 1905 3/4 19.05 6 3-3/8 3/8 D120 1905

Note: Overall and flute lengths do not include drill point. 19 www.sutton.com.au 118° Standard Point Drills Reduced Shank, 12.5mm or 1/2” Common point for general purpose applications. Designed to increase the drilling capacity of drill chucks and for slow speed (350RPM or less), large scale boring. Reduced Shank Drill sizes above 12.5mm & 1/2” feature reduced shanks to suit 12.5mm drill chucks.

Precision Ground Flute Application Bright cutting edge with blue flute making DIY it a better choice Trade Size when drilling ferrous Industrial Application 6” (152mm) overall materials. length with a 3” Automotive (86mm) flute length. Metalworker Machine Shop MRO

Catalogue Code Size Ref. Catalogue Code D188 Catalogue Code D188 Discount Group A0906 Discount Group A0906 Surface Finish Blue Surface Finish Blue D100 0100 Material HSS Material HSS Point Type & Angle 118º Standard Point Type & Angle 118º Standard Item # Packaging Vinyl Sleeve Packaging Vinyl Sleeve O/A Flute O/A Flute Size Ref. Diameter Length Length Item # Size Ref. Diameter Length Length Item # 12.5 Shank 1/2 Shank 1350 13.5 152 86 D188 1350 1310 33/64 13.10 6 3-3/8 D188 1310 1400 14.0 152 86 D188 1400 1349 17/32 13.49 6 3-3/8 D188 1349 1450 14.5 152 86 D188 1450 1389 35/64 13.89 6 3-3/8 D188 1389 1500 15.0 152 86 D188 1500 1429 9/16 14.29 6 3-3/8 D188 1429 1550 15.5 152 86 D188 1550 1468 37/64 14.68 6 3-3/8 D188 1468 19/32 15.08 6 3-3/8 D188 1508 1600 16.0 152 86 D188 1600 1508 1548 39/64 15.48 6 3-3/8 D188 1548 1650 16.5 152 86 D188 1650 1588 5/8 15.87 6 3-3/8 D188 1588 1700 17.0 152 86 D188 1700 1627 41/64 16.27 6 3-3/8 D188 1627 1750 17.5 152 86 D188 1750 1667 21/32 16.67 6 3-3/8 D188 1667 1800 18.0 152 86 D188 1800 1707 43/64 17.06 6 3-3/8 D188 1707 1850 18.5 152 86 D188 1850 1746 11/16 17.46 6 3-3/8 D188 1746 19.0 152 86 D188 1900 1900 1786 45/64 17.86 6 3-3/8 D188 1786 1950 19.5 152 86 D188 1950 1826 23/32 18.26 6 3-3/8 D188 1826 2000 20.0 152 86 D188 2000 1865 47/64 18.65 6 3-3/8 D188 1865 2050 20.5 152 86 D188 2050 1905 3/4 19.05 6 3-3/8 D188 1905 2100 21.0 152 86 D188 2100 1945 49/64 19.45 6 3-3/8 D188 1945 2150 21.5 152 86 D188 2150 1984 25/32 19.84 6 3-3/8 D188 1984 2200 22.0 152 86 D188 2200 2024 51/64 20.24 6 3-3/8 D188 2024 2250 22.5 152 86 D188 2250 2064 13/16 20.64 6 3-3/8 D188 2064 2300 23.0 152 86 D188 2300 2103 53/64 21.03 6 3-3/8 D188 2103 2350 23.5 152 86 D188 2350 2143 27/32 21.43 6 3-3/8 D188 2143 2400 24.0 152 86 D188 2400 2183 55/64 21.83 6 3-3/8 D188 2183 2450 24.5 152 86 D188 2450 2223 7/8 22.22 6 3-3/8 D188 2223 2500 25.0 152 86 D188 2500 2262 57/64 22.62 6 3-3/8 D188 2262 29/32 23.02 6 3-3/8 D188 2302 2600 26.0 152 86 D188 2600 2302 2342 59/64 23.41 6 3-3/8 D188 2342 2800 28.0 152 86 D188 2800 2381 15/16 23.81 6 3-3/8 D188 2381 3000 30.0 152 86 D188 3000 2421 61/64 24.21 6 3-3/8 D188 2421 2461 31/32 24.61 6 3-3/8 D188 2461 2501 63/64 25.00 6 3-3/8 D188 2501 2540 1 25.40 6 3-3/8 D188 2540 2699 1-1/16 26.99 6 3-3/8 D188 2699 2858 1-1/8 28.57 6 3-3/8 D188 2858 3016 1-3/16 30.16 6 3-3/8 D188 3016 3175 1-1/4 31.75 6 3-3/8 D188 3175

20 Note: Overall and flute lengths do not include drill point.

www.sutton.com.au Drills Reduced Shank, Sets

Carrying Handle Protective Case For convenient handling Ideal for storage and around job site. transportation of your bits.

Durable Integral Hinge Extends the life of the case.

Application DIY Trade Industrial Application Automotive Metalworker Machine Shop RS16 MRO

Catalogue Code Size Ref. Catalogue Code D188 Discount Group A1202 Surface Finish Blue D100 0100 Material HSS Point Type & Angle 118º Standard Item # Packaging Set Size Ref. Contents Case Pieces Item # RS4 5/8, 3/4, 7/8, 1 Foam 4 D188 RS4 with 1/2” shanks RS4M 16.0, 18.0, 22.0, 25.0mm Foam 4 D188 RS4M with 12.5mm shanks S8R 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, Plastic 8 D188 S8R 15/16, 1 with 1/2” shanks SM8R 14.0, 15.0, 16.0, 16.5 Plastic 8 D188 SM8R 18.0, 20.0, 22.0, 25.0 with 12.5mm shanks RS16 17/32, 9/16, 19/32, 5/8 Plastic 16 D188 RS16 RS4 21/32, 11/16, 23/32, 3/4 25/32, 13/16, 27/32, 7/8 29/32, 15/16, 31/32, 1 with 1/2” shanks

Merchandisers** MER1 SRD20 Reduced Shank Drills Imperial D188 MER1 2 each 7/16, 1/2, 9/16, 5/8, 3/4, x 3/8 2 each 17/32, 9/16, 5/8, 3/4, x 1/2 1 each 11/16, 1, x 1/2 shank

RS4M MER1M SRDM16 Reduced Shank Drills Metric D188 MER1M 2 each 14.0, 16.0, 18.0, 20.0, 22.0, x 12.5 shank 1 each 13.5, 14.5, 15.0, 16.5, 17.0, 19.0, x 12.5 shank

S8R

SRD20 SRDM16 SM8R

Note: Overall and flute lengths do not include drill point. **Please refer to merchandiser section for individual codes when ordering. 21 www.sutton.com.au Drills Panel & Rivet 135° Self Centering Point Minimises wandering when starting. Developed to drill holes for rivets in flat and curved panels and used in sheet metal fabrication. Packaging, available in twin or trade (10) pack.

Double Ended Tupoint increases drill life. Ensure that the chuck jaws are fully tightened. Drill Bit 1 8 Shortie rivets For 3.0mm

Application

Rivet Flute Length for drilling thin metals High speed steel Designed for shallow hole DIY drilling no deeper than Trade 1.25mm x diameter Automotive Electrician Plumber General Contractor Metalworker MRO

Catalogue Code Size Ref. Catalogue Code Discount Group A0422 A1002 Surface Finish Bright Bright D100 0100 Material HSS HSS Point Type & Angle 135º Self Centering 135º Self Centering Item # Packaging Carded (2) Bulk Hang Pack (10) O/A Flute Size Ref. Diameter Length Length Item # Item # Shortie – Single Ended D131 D132 0318 1/8 2-1/8 3/4 D131 0318 D132 0318 0326 #30 2-1/8 3/4 D131 0326 D132 0326 0409 #20 2-1/8 7/8 D131 0409 D132 0409 0485 #11 2-1/8 7/8 D131 0485 D132 0485

Tupoint – Double Ended D133 D134 0318 1/8 2-1/8 5/8 D133 0318 D134 0318 0326 #30 2-1/8 5/8 D133 0326 D134 0326 0409 #20 2-1/8 5/8 D133 0409 D134 0409 0485 #11 2-1/8 5/8 D133 0485 D134 0485

Merchandiser** Pieces MER1 Single Ended 5 each: 1/8, #20, #11 50 D133 MER1 10 each: #30 Double Ended 5 each: 1/8, #20, #11 10 each: #30

Note: Overall and flute lengths do not include drill point. 22 **Please refer to merchandiser section for individual codes when ordering. www.sutton.com.au Drills Panel & Rivet, Bulk 135° Self Centering Point Developed to drill holes for rivets in flat and curved Minimises wandering when starting. panels and used in sheet metal fabrication.

Double Ended Tupoint increases drill life. Ensure that the chuck jaws are fully tightened.

Application Flute Length Designed for shallow hole DIY drilling no deeper than Trade 1.25mm x diameter. Automotive Electrician Plumber General Contractor Metalworker MRO

Catalogue Code Size Ref. Catalogue Code Discount Group A0802 A0802 A0806 A0802 Surface Finish Bright Blue TiN Bright D100 0100 Material HSS HSS HSS Cobalt Point Type & Angle 135º Self Centering 135º Self Centering 135º Self Centering 135º Self Centering Item # Packaging Bulk (10) Bulk (10) Bulk (1) Bulk (10) O/A Flute Size Ref. Diameter Length Length Item # Item # Item # Item # Shortie – Single Ended D121 D124 D127 0318 1/8 2-1/8 3/4 D121 0318 D124 0318 D127 0318 0326 #30 2-1/8 3/4 D121 0326 D124 0326 D127 0326 0409 #20 2-1/8 7/8 D121 0409 D124 0409 D127 0409 0485 #11 2-1/8 7/8 D121 0485 D124 0485 D127 0485

Tupoint – Double Ended D122 D125 D128 D130 0318 1/8 2-1/8 5/8 D122 0318 D125 0318 D128 0318 D130 0318 0326 #30 2-1/8 5/8 D122 0326 D125 0326 D128 0326 D130 0326 0409 #20 2-1/8 5/8 D122 0409 D125 0409 D128 0409 D130 0409 0485 #11 2-1/8 5/8 D122 0485 D125 0485 D128 0485 D130 0485

Stub – 118º point (Discount Group A1002) D123 D126 0318 1/8 1-7/8 7/8 D123 0318 D100 0318 0326 #30 1-15/16 15/16 D123 0326 D126 0326 0409 #20 2-1/8 1-1/16 D123 0409 D126 0409 0485 #11 2-1/4 1-3/16 D123 0485 D126 0485

23 www.sutton.com.au Drills Wood Bits Spur Cutting Edges Reduce splintering Precision ground brad point and ensure a smooth drills for use in furniture making, clean hole. dowelling, cabinetry and other woodworking applications. Reduced Shank Drill sizes above 10mm feature reduced shanks to suit 10mm drill chucks.

W Point Provides accurate positioning for starting the hole.

Flute Design Special flute shape prevents jamming and ensures speedy chip Application extraction. DIY Trade Cabinet Maker Furniture Maker Woodworker

Catalogue Code Size Ref. Catalogue Code D500 Discount Group A1132 Surface Finish Bright D100 0100 Material HSS Point Type Brad Point Item # Packaging Carded O/A Flute Size Ref. Diameter Length Length Shank Item # 0400 4.0 75 43 D500 0400 0500 5.0 86 52 D500 0500 0600 6.0 93 57 D500 0600 0800 8.0 117 75 D500 0800 0950 9.5 125 81 D500 0950 1000 10.0 133 87 D500 1000 1200 12.0 151 101 10 D500 1200

24 Note: 12mm bit has a 10mm reduced shank.

www.sutton.com.au Spur Cutting Edge Drills Spade Bits Reduce splintering and ensure a smooth clean hole.

For drilling in timber and light building materials. Used for cable, window & pipe installation.

Hex Shank For positive grip, preventing slippage in chuck. Point Provides accurate positioning for starting the hole. Can be resharpened.

Hole For hanging in workshop and pulling wires through holes.

Holder Application Suits all 1/4” hex Grub Screw shank bits. DIY To hold bits securely. Trade Cabinet Maker Shank Extension Furniture Maker For extended reach. Woodworker

Catalogue Code Size Ref. Catalogue Code D501 Discount Group A1302 Surface Finish Bright D100 0100 Material TCA Point Type Angle Spurs Item # Packaging Double Blister Size Ref. Diameter Item # 0600 6 D501 0600 0800 8 D501 0800 1000 10 D501 1000 1200 12 D501 1200 1400 14 D501 1400 1600 16 D501 1600 1800 18 D501 1800 1900 19 D501 1900 2000 20 D501 2000 2200 22 D501 2200 2400 24 D501 2400 2500 25 D501 2500 2800 28 D501 2800 3000 30 D501 3000 3200 32 D501 3200 SS3 SS6 3500 35 D501 3500 3800 38 D501 3800 Set Pieces SS3 Sizes: 19, 22, 25mm 3 D501 SS3 SS6 Sizes: 16, 19, 22, 25, 32mm 6 D501 SS6 150mm Extension Shank

Merchandiser** MER2 3 each: 6, 8, 10, 12, 14, 16, 19, 22, 25, 30, 45 D501 MER2 32, 35, 38mm 150mm extension, SS3 Set MER3 3 each: 6, 8, 10, 14, 16, 18, 20, 22, 72 D501 MER3 24, 28, 30, 32, 35, 38mm, 150, 300mm extension, SS3, SS6 Set 6 each: 12, 19, 25mm

Extension Shanks D502 Suitable for use with Spade Bits 19mm and Larger 150L 150mm Long D502 150L No.2 Merchandiser 300L 300mm Long D502 300L

**Please refer to merchandiser section for individual codes when ordering. 25 www.sutton.com.au Drills Auger Bits Coarse Screw Point For fast cutting through holes in Solid Core Draws the bit into the timber such as fence posts and Solid centre design work piece providing railway sleepers. Suitable for kiln provides extra rigidity fast drilling in hard and dried timber hardwood, softwood, while drilling. soft woods. MDF and particle boards. Not suitable for green sap woods.

Hex Shank Single-Spur Cutting Edge For positive grip, Scribes the circumference preventing slippage of the hole for in chuck. a smoother finish.

Application DIY Wide Lands Trade Keep the bit straight as it Electrician bores through the hole. Plumber Carpenter Woodworker Roofer

Catalogue Code Size Ref. Catalogue Code Discount Group A0102 Surface Finish Bright D100 0100 Material Alloy Steel Point Type & Angle Screwpoint Item # Packaging Vinyl Sleeve O/A Flute Round Shank Hex Shank Size Ref. DIA Length Length Diameter mm inch Item # Auger Bits – Short Series – General Use. Hard & Softwood D510 0600 6 160 100 5.7 5.0 7/32 D510 0600 0800 8 170 100 7.0 6.35 1/4 D510 0800 1000 10 190 120 7.0 6.35 1/4 D510 1000 1200 12 190 120 7.0 6.35 1/4 D510 1200 1300 13 190 120 7.0 6.35 1/4 D510 1300 1400 14 200 130 7.0 6.35 1/4 D510 1400 1600 16 200 130 7.0 6.35 1/4 D510 1600 1800 18 200 130 7.0 6.35 1/4 D510 1800 2000 20 210 140 10.0 8.6 21/64 D510 2000 2200 22 210 140 10.0 8.6 21/64 D510 2200 2500 25 210 140 10.0 8.6 21/64 D510 2500 Merchandiser** Pieces MER1 2 each: 6, 8, 10, 12, 13, 14, 16, 20, 22, 25 20 D510 MER1 Auger Bits – Medium Series – General Use. Hard & Softwood D511 0800 8 225 165 7.0 6.35 1/4 D511 0800 1000 10 250 190 7.0 6.35 1/4 D511 1000 1200 12 270 195 10.0 9.0 11/32 D511 1200 1400 14 290 210 10.0 9.0 11/32 D511 1400 1600 16 290 210 10.0 9.0 11/32 D511 1600 1800 18 330 240 10.0 9.0 11/32 D511 1800 2000 20 330 240 10.0 9.0 11/32 D511 2000 2200 22 330 240 10.0 9.0 11/32 D511 2200 2500 25 330 240 10.0 9.0 11/32 D511 2500 3000 30 330 240 13.0 11.0 27/64 D511 3000 3200 32 330 240 13.0 11.0 27/64 D511 3200 3500 35 330 240 13.0 11.0 27/64 D511 3500 Merchandiser** Pieces MER1 2 each: 8, 10, 12, 14, 16, 20, 22, 25 16 D511 MER1 Auger Bits – Long Series – General Use. Hard & Softwood D512 1000 10 500 400 10.0 8.6 21/64 D512 1000 1200 12 500 400 10.0 8.6 21/64 D512 1200 Merchandiser 1300 13 500 400 12.5 11.1 7/16 D512 1300 1400 14 500 400 13.0 11.1 7/16 D512 1400 1500 16 500 400 13.0 11.1 7/16 D512 1500 1800 18 500 400 13.0 11.1 7/16 D512 1800 2000 20 500 400 13.0 11.1 7/16 D512 2000 2200 22 500 400 13.0 11.1 7/16 D512 2200 2500 25 500 400 13.0 11.1 7/16 D512 2500 3000 30 500 400 13.0 11.1 7/16 D512 3000 3200 32 500 400 13.0 11.1 7/16 D512 3200 3500 35 500 400 13.0 11.1 7/16 D512 3500 3800 38 500 400 13.0 11.1 7/16 D512 3800

26 **Please refer to merchandiser section for individual codes when ordering.

www.sutton.com.au Drills Multi-Purpose NEW For drilling in various materials such as TCT Point timber, concrete, brick, stainless steel, cast Ground carbide tip with 2 iron, steel & glass. Especially suited for drilling cutting edges. multi laminated construction materials. Hammer Action: For masonry materials only.* Rotary Action: For all other materials.

8.0 mm

x 120 Drill Bit Parallel Shank Brazed Tip For rotary or hammer drill Unique brazing process applications. ensures a perfect bond between tip & body. Multi-Purpose

For Blue plug Tungstenmasonry steel carbide tipped for drilling wood Ne w & Improved Design Application DIY Spiral Flute Trade The L-profile flute design Electrician efficiently extracts Plumber concrete, metal & wood

/ Carpenter particles. / Plasterer Masonry

Catalogue Code Size Ref. Catalogue Code D610 D611 Discount Group A0604 A0604 Surface Finish Bright Bright D100 0100 Material TCT TCT Application Standard Extra Length Item # Packaging Carded Carded Diameter O/A Size Ref. mm inch Plug Colour Length Item # Item # 0300 3 1/8 Yellow x 60 D610 0300 0400 4 5/32 x 75 D610 0400 0500 5 3/16 White x 85 D610 0500 0550 5.5 7/32 Red x 85 D610 0550 0600 6 - x 100 D610 0600 0650 6.5 1/4 Green x 100 D610 0650 0653 x 300 D611 0653 0700 7 9/32 x 100 D610 0700 0703 x 300 D611 0703 0800 8 5/16 Blue x 120 D610 0800 0803 x 300 D611 0803 0900 9 11/32 x 120 D610 0900 1000 10 3/8 Orange x 120 D610 1000 1003 x 300 D611 1003 1200 12 - x 150 D610 1200 1203 x 300 D611 1203 1300 13 1/2 x 150 D610 1300 1303 x 300 D611 1303 1400 14 9/16 x 150 D610 1400 1500 15 - x 150 D610 1500 1600 16 5/8 Black x 150 D610 1600

Merchandiser** Pieces MER1 5 each: (ST) 3, 4, 5, 5.5, 6, 6.5, 7, 8, 10mm 55 D610 MER1 (EL) 12, 13

MER2 5 each: (ST) 3, 4, 5, 5.5, 6, 6.5, 7, 8, 9, 10, 105 D610 MER2 12, 13, 14, 15, 16mm (EL) 6.5, 7, 8, 10, 12, 13mm

* Drilling masonry materials prior to wood or steel will dull tip reducing the cutting performance. **Please refer to merchandiser section for individual codes when ordering. 27 www.sutton.com.au Drills Masonry

TCT Point Tradesman quality ideal for use 2 cutting edged carbide percussion tip in natural and artificial stone, with semi positive profile for aggressive masonry, brickwork & concrete. drilling in hard materials.

Masonry Masonry 8.0 mm Parallel Shank x 120 For rotary hammer & percussion drilling. Brazed Tip Unique brazing process

Bit ensures a perfect bond For Blue plug between tip & body. Ha mme r Tungsten carbide tipped for drilling bricks tiles concrete Tungstentiles carbide tipped for drilling bricks Ne w & Improved Design

Application DIY Double Spiral Flute Trade Rolled double flute, provides greater Electrician dust extraction, extending drill life. / Plumber

/ Carpenter Plasterer Masonry

Catalogue Code Size Ref. Catalogue Code D600 D601 D602 Discount Group A0604 A0604 A0604 Surface Finish Sandblasted Sandblasted Sandblasted D100 0100 Material TCT TCT TCT Application Standard Fixing Single Brick Double Brick Item # Packaging Carded Carded Vinyl Sleeve Diameter O/A Size Ref. mm inch Plug Colour Length Shank Item # Item # Item # 0300 3 1/8 Yellow x 60 D600 0300 0400 4 5/32 x 75 D600 0400 0500 5 3/16 White x 85 D600 0500 0500 x 150 D601 0500 0550 5.5 7/32 Red x 95 D600 0550 0550 x 150 D601 0550 0600 6 - x 100 D600 0600 0600 x 150 D601 0600 0650 6.5 1/4 Green x 100 D600 0650 0650 x 150 D601 0650 0650 x 400 D602 0650 0700 7 9/32 x 100 D600 0700 0700 x 150 D601 0700 0800 8 5/16 Blue x 120 D600 0800 0800 x 150 D601 0800 0800 x 400 D602 0800 0900 9 11/32 x 120 D600 0900 1000 10 3/8 Orange x 120 D600 1000 1000 x 150 D601 1000 1000 x 400 D602 1000 1100 11 Grey x 150 10 D601 1100 1200 12 x 120 10 D600 1200 1200 x 150 10 D601 1200 1300 13 1/2 x 120 10 D600 1300 1300 x 150 10 D601 1300 1300 x 400 10 D602 1300 1400 14 9/16 x 150 10 D601 1400 1600 16 5/8 Black x 150 12.7 D601 1600 1600 x 400 12.7 D602 1600 2000 20 3/4 x 160 12.7 D601 2000 2000 x 400 12.7 D602 2000 2200 22 7/8 x 160 12.7 D601 2200 2200 x 400 12.7 D602 2200 2500 25 1 x 160 12.7 D601 2500 x 400 12.7 D602 2500

Sets Pieces SMD2 (SF): 4.0, 5.0, 5.5, 6.5, 8.0, 10.0mm 6 D600 SMD2

Merchandiser** MER2 SMRY-86 86 D600 MER2 10 each (SF): 5.5, 6.5mm 5 each (SB): 5.5, 6.5, 10.0mm (SF): 3.0, 4.0, 5.0, 6.0, 7.0, 8.0, 10.0mm SMD-2 2 each (SB): 5.0, 6.0, 7.0, 8.0, 11.0, 12.0, 13.0, 16.0mm

(SF) - Standard Fixing (SB) - Single Brick (DB) - Double Brick 28 **Please refer to merchandiser section for individual codes when ordering.

www.sutton.com.au Drills Penetrator

TCT Point Professional quality for tougher 2 cutting edges, diamond ground tungsten masonry applications. carbide percussion tip for faster drilling. Masonry

8.0 Hex Shank mm x 150 For positive grip, preventing Brazed Tip B slippage in chuck. Unique brazing process ensures a it perfect bond between tip & body. For Blue plug Penetrator/H Tungstenconcrete, stone carbide tipped for drilling bricks Designed for trade use

Application DIY ammer Trade /

/ Electrician Spiral Flute

A Plumber

cti on Ground flute with special shape to Carpenter increase dust evacuation. Plasterer Masonry

Catalogue Code Size Ref. Catalogue Code D603 Discount Group A0608 Surface Finish Bright D100 0100 Material TCT Application Single Brick Item # Packaging Carded O/A Size Ref. Diameter Plug Colour Length Hex Item # 0500 5.0 White 150 4.1 D603 0500 0550 5.5 Red 150 4.3 D603 0550 0600 6.0 150 4.8 D603 0600 0650 6.5 Green 150 4.7 D603 0650 0800 8.0 Blue 150 6.7 D603 0800 1000 10.0 Orange 150 8.1 D603 1000 1200 12.0 Grey 150 8.9 D603 1200 1300 13.0 150 10.0 D603 1300 1400 14.0 150 10.9 D603 1400 1600 16.0 Black 150 11.0 D603 1600 2000 20.0 160 11.0 D603 2000

Merchandiser** Pieces MER1 PMD-24 24 D603 MER1 1 each 13.0, 14.0, 16.0, 20.0mm 2 each 5.0mm 3 each 5.5, 6.0, 6.5, 8.0 , 10.0, 12.0mm

**Please refer to merchandiser section for individual codes when ordering. 29 www.sutton.com.au Dressing

Porcelain Monocottura & Fully Vitrified

Marble A heating up (darkened segment) causes Glazed a lower cutting power and needs to be dressed for better performance. Terracotta To dress the tool, make a hole in the stone with slow speed. Polished Sandstone

Standard Ceramics Sandstone  

www.sutton.com.au Core Bits Diamond Blue Ceram NEW Blue CERAM Point Feature diamond segment Diamond segment tip technology, enabling the bit to be for long life. Can be used wet or dry. dressed for optimal For drilling porcelain, performance. monocottura, marble, glazed, terracotta, sandstone & standard ceramic tiles.

Shank 10mm hex shank to suit non-hammer action portable power drills.

Application

Core Cavity DIY Large cavity for fast Trade material extraction. Plumber Masonry

Catalogue Code Size Ref. Catalogue Code D605 Discount Group A0608 Surface Finish Bright D100 0100 Material Diamond Composite Point Type Segment Item # Packaging Double Blister Speed RPM Size Ref. Diameter Plug Colour Shank Wet Dry Item # 0600 6 Red 10mm Hex 3000 11000 D605 0600 0700 7 Green 10mm Hex 3000 11000 D605 0700 0800 8 Blue 10mm Hex 3000 11000 D605 0800 1000 10 Orange 10mm Hex 3000 11000 D605 1000 1200 12 Grey 10mm Hex 3000 11000 D605 1200 1500 15 Black 10mm Hex 3000 11000 D605 1500 2000 20 10mm Hex 3000 11000 D605 2000 2500 25 10mm Hex 3000 11000 D605 2500

ST01 Dressing Stone D605 ST01 WAT1 Water Dripper Suits Drill 5-35 mm drill D605 WAT1 water dripper Merchandiser Pieces MER1 1 each: 7, 10, 12, 15, 20, 25mm, Stone 11 D605 MER1 2 each: 6, 8mm MER2 2 each: 7, 10, 12, 15, 20, 25mm 24 D605 MER2 3 each: 6, 8mm, Stone, Water Dripper

1 3

2 4

Instructions For Use 1 Water the drilling area. To avoid drill slipping start with a 45º angle. 2 After the hole is started gradually straighten up the drill. 3 Make a swinging movement to allow for dust evacuation. 4 Make sure the core has been removed from bit after drilling. Helpful Hints • Do not use with hammer setting as this will damage the bit and tile • Apply consistent pressure, allowing the tool to do the work • Cutting speed with water <3000 RPM • Cutting speed dry <11000 RPM • Dressing the bit will increase performance

31 www.sutton.com.au Drills Glass & Tile

For drilling holes in ceramic tiles, glass & mirrors. To be used at slow speed with Spear Point non impact and suitable coolant. 4 edged tungsten carbide tip design, shaves rather Note: Not suitable for toughened than cuts. glass.

Parallel Shank To suit non-hammer action portable power drills.

Application DIY Precision Diamond Ground Trade For exact pilot drilling. Plumber Masonry

Catalogue Code Size Ref. Catalogue Code D604 Discount Group A0608 Surface Finish Bright D100 0100 Material TCT Point Type Spear Item # Packaging Carded Size Ref. Diameter Item # 0300 3.0 D604 0300 0400 4.0 D604 0400 0500 5.0 D604 0500 0600 6.0 D604 0600 0650 6.5 D604 0650 0800 8.0 D604 0800 1000 10.0 D604 1000 1200 12.0 D604 1200

32 Note: Not for drilling toughened glass.

www.sutton.com.au Drills Runner +, SDS Plus NEW

Tradesman quality ideal for use in concrete, brick, aerated concrete, Concrete Breaker TCT stone & granite. 160˚ self centering tip, maximises chiselling effect and breaking of the concrete.

8.0 mm x 160

SDS Plus

For Blue plug Ha mme r Suitable for all SDS plus hammer drilling machines For soft to medium hard materials - Concrete & Masonry For soft to medium hard materials - Concrete & Masonry Shank Suits all SDS Plus rotary hammer drills. Application

Progressive Helix DIY To assist in dust Trade extraction and for Electrician increased rigidity. Plumber Carpenter Plasterer Masonry

Catalogue Code Size Ref. Catalogue Code D620 D621 D622 Discount Group A0608 A0608 A0608 Surface Finish Sandblasted Sandblasted Sandblasted D100 0100 Material TCT TCT TCT Application Short Medium Long Item # Packaging Carded Carded Carded Diameter O/A Size Ref. mm inch Plug Colour Length Shank Item # Item # Item # 0500 5 3/16 White x 110 SDS Plus D620 0500 0500 x 160 SDS Plus D621 0500 0600 6 - Red x 110 SDS Plus D620 0600 0600 x 160 SDS Plus D621 0600 0600 x 210 SDS Plus D622 0600 0650 6.5 1/4 Green x 110 SDS Plus D620 0650 0650 x 160 SDS Plus D621 0650 0650 x 210 SDS Plus D622 0650 0800 8 5/16 Blue x 110 SDS Plus D620 0800 0800 x 160 SDS Plus D621 0800 0800 x 210 SDS Plus D622 0800 1000 10 3/8 Orange x 160 SDS Plus D621 1000 1000 x 210 SDS Plus D622 1000 1200 12 - Grey x 160 SDS Plus D621 1200 1200 x 210 SDS Plus D622 1200 1300 13 1/2 x 160 SDS Plus D621 1300 1400 14 9/16 x 160 SDS Plus D621 1400 1400 x 210 SDS Plus D622 1400 1600 16 5/8 Black x 210 SDS Plus D622 1600 Set 0005 5.0, 6.0, 6.5, 8.0, 10.0mm x 160 SDS Plus D620 0005

Merchandiser** Pieces MER2 5 each: (110mm): 5.0, 6.0, 6.5, 8.0mm 87 D620 MER2 5 each: (160mm): 5.0, 6.0, 6.5, 8.0, 10.0, 12.0mm 3 each: (160mm): 13.0, 14.0mm 5 each: (210mm): 6.0, 6.5, 8.0, 10.0mm 3 each: (210mm): 12.0, 14.0, 16.0mm 2 each: Set

**Please refer to merchandiser section for individual codes when ordering. 33 www.sutton.com.au Drills Twister Multi-fit

Concrete Breaker TCT 160˚ self centering tip, maximises chiselling effect and breaking of the concrete.

Professional quality, 30% faster than conventional SDS drills. For concrete, brick, aerated concrete, stone & granite.

Shank Suits most SDS rotary Square Spiral Flute hammer drills. Combining a Application compression channel DIY with a depression chamber gives Trade an instant result: Professional perfectly controlled Electrician dust removal. Plumber Carpenter Plasterer Masonry

Discount Group A0608 Discount Group A0608 Surface Finish Sandblasted Surface Finish Sandblasted Material TCT Material TCT Point Type & Angle Self Centering Point Type & Angle Self Centering Packaging Plastic Hang Packaging Plastic Hang Diameter O/A Length Flute Length Shank Item # Diameter O/A Length Flute Length Shank Item # 5 110 50 SDS Multi-fit 152189 13 160 90 SDS Multi-fit 152363 160 90 SDS Multi-fit 152264 210 150 SDS Multi-fit 152486 5.5 110 50 SDS Multi-fit 152196 260 200 SDS Multi-fit 152622 160 90 SDS Multi-fit 152271 410 350 SDS Multi-fit 152776 6 110 50 SDS Multi-fit 152202 14 160 90 SDS Multi-fit 152370 160 90 SDS Multi-fit 152288 210 150 SDS Multi-fit 152493 210 150 SDS Multi-fit 152400 260 200 SDS Multi-fit 152639 6.5 110 50 SDS Multi-fit 152219 16 160 90 SDS Multi-fit 152394 160 90 SDS Multi-fit 152295 210 150 SDS Multi-fit 152516 210 150 SDS Multi-fit 152417 260 200 SDS Multi-fit 152653 7 110 50 SDS Multi-fit 152226 410 350 SDS Multi-fit 152806 160 90 SDS Multi-fit 152301 18 210 150 SDS Multi-fit 152523 8 110 50 SDS Multi-fit 152233 20 210 150 SDS Multi-fit 152530 160 90 SDS Multi-fit 152318 260 200 SDS Multi-fit 152684 210 150 SDS Multi-fit 152431 410 350 SDS Multi-fit 152820 10 110 50 SDS Multi-fit 152257 22 260 200 SDS Multi-fit 152691 160 90 SDS Multi-fit 152332 410 350 SDS Multi-fit 152837 210 150 SDS Multi-fit 152455 24 260 200 SDS Multi-fit 152707 260 200 SDS Multi-fit 152592 25 260 200 SDS Multi-fit 152714 410 350 SDS Multi-fit 152745 410 350 SDS Multi-fit 152851 12 160 90 SDS Multi-fit 152356 210 150 SDS Multi-fit 152479 260 200 SDS Multi-fit 152615 410 350 SDS Multi-fit 152769

www.sutton.com.au Drills Twister SDS Plus

Concrete Breaker TCT 160˚ self centering tip, maximises chiselling effect and breaking of the concrete.

Professional quality, 30% faster than conventional SDS drills. For concrete, brick, aerated concrete, stone & granite.

Shank Suits all SDS Plus rotary Square Spiral Flute hammer drills. Combining a Application compression channel DIY with a depression chamber gives Trade an instant result: Professional perfectly controlled Electrician dust removal. Plumber Carpenter Plasterer Masonry

Discount Group A0608 Discount Group A0608 Surface Finish Sandblasted Surface Finish Sandblasted Material TCT Material TCT Point Type Self Centering Point Type Self Centering Packaging Plastic Hang Packaging Plastic Hang O/A Flute O/A Flute Dia Length Length Shank Item # Dia Length Length Shank Item # 5 110 50 SDS Plus 008366 14 210 150 SDS Plus 008595 160 100 SDS Plus 008410 260 200 SDS Plus 008717 5.5 110 50 SDS Plus 023253 310 250 SDS Plus 023338 160 100 SDS Plus 023277 410 350 SDS Plus 008823 6 110 50 SDS Plus 008373 460 400 SDS Plus 023451 160 100 SDS Plus 008427 610 550 SDS Plus 008946 210 150 SDS Plus 008533 1000 940 SDS Plus 009035 260 200 SDS Plus 008663 15 160 100 SDS Plus 008519 310 250 SDS Plus 023291 16 160 100 SDS Plus 008526 6.5 110 50 SDS Plus 023260 210 150 SDS Plus 008618 160 100 SDS Plus 020849 260 200 SDS Plus 008731 210 150 SDS Plus 020856 310 250 SDS Plus 023352 260 200 SDS Plus 076389 410 350 SDS Plus 008847 7 160 100 SDS Plus 008434 460 400 SDS Plus 023475 8 110 50 SDS Plus 008397 610 550 SDS Plus 008953 160 100 SDS Plus 008441 1000 940 SDS Plus 009042 210 150 SDS Plus 008540 18 210 150 SDS Plus 008625 260 200 SDS Plus 008670 260 200 SDS Plus 008748 136C 5 Piece Set 310 250 SDS Plus 023307 310 250 SDS Plus 023369 6, 8 x 110mm 410 350 SDS Plus 008786 410 350 SDS Plus 008854 6, 8, 10 x 160mm 460 400 SDS Plus 023413 460 400 SDS Plus 023482 Item #: 054202 610 550 SDS Plus 008908 610 550 SDS Plus 008960 1000 940 SDS Plus 009004 1000 940 SDS Plus 009059 9 160 100 SDS Plus 008458 20 210 150 SDS Plus 008632 10 110 50 SDS Plus 008403 260 200 SDS Plus 008755 160 100 SDS Plus 008465 310 250 SDS Plus 023376 210 150 SDS Plus 008564 410 350 SDS Plus 008878 260 200 SDS Plus 008687 460 400 SDS Plus 023505 310 250 SDS Plus 023314 610 550 SDS Plus 008977 410 350 SDS Plus 008793 1000 940 SDS Plus 009066 460 400 SDS Plus 023420 22 210 150 SDS Plus 008649 610 550 SDS Plus 008915 260 200 SDS Plus 008762 1000 940 SDS Plus 009011 310 250 SDS Plus 023383 11 160 100 SDS Plus 008472 410 350 SDS Plus 008885 12 160 100 SDS Plus 008489 460 400 SDS Plus 023512 210 150 SDS Plus 008571 610 550 SDS Plus 008984 260 200 SDS Plus 008694 24 210 150 SDS Plus 014817 310 250 SDS Plus 023321 260 200 SDS Plus 014824 410 350 SDS Plus 008809 310 250 SDS Plus 023390 460 400 SDS Plus 023437 410 350 SDS Plus 014831 610 550 SDS Plus 008922 460 400 SDS Plus 023529 1000 940 SDS Plus 009028 610 550 SDS Plus 027367 13 160 100 SDS Plus 008496 25 210 150 SDS Plus 008656 102C 7 Piece Set 210 150 SDS Plus 008588 260 200 SDS Plus 008779 5, 6, 8 x 110mm 260 200 SDS Plus 008700 310 250 SDS Plus 023406 6, 8, 10, 12 x 160mm 310 250 SDS Plus 054950 410 350 SDS Plus 008892 Item #: 064904 410 350 SDS Plus 008816 460 400 SDS Plus 023536 460 400 SDS Plus 023444 610 550 SDS Plus 008991 610 550 SDS Plus 008939 14 160 100 SDS Plus 008502 Merchandiser SDS22 Twister Plus 406886

**Please refer to merchandiser section for individual codes when ordering. 35 www.sutton.com.au Drills Booster SDS Plus

Unique TCT 3 cutting edge self centering tip prevents snagging on reinforced mesh.

Professional quality, 30% faster than conventional SDS drills. Will drill through reinforced concrete mesh.

Shank Suits all SDS Plus rotary hammer drills.

Square Spiral Flute Combining a Application compression channel DIY with a depression Trade chamber gives Professional an instant result: Electrician perfectly controlled Plumber dust removal. Carpenter Plasterer Masonry

Discount Group A0608 Discount Group A0608 Surface Finish Sandblasted Surface Finish Sandblasted Material TCT Material TCT Point Type 3 Cutting Edge Point Type 3 Cutting Edge Packaging Plastic Hang Packaging Plastic Hang O/A Flute O/A Flute Diameter Length Length Shank Item # Diameter Length Length Shank Item # 6 110 50 SDS Plus 029385 14 160 100 SDS Plus 077911 160 100 SDS Plus 029408 210 150 SDS Plus 077935 210 150 SDS Plus 029446 310 250 SDS Plus 077959 310 250 SDS Plus 084186 460 400 SDS Plus 054318 6.5 110 50 SDS Plus 051577 16 210 150 SDS Plus 084155 160 100 SDS Plus 051584 310 250 SDS Plus 054264 210 150 SDS Plus 093607 460 400 SDS Plus 054325 310 250 SDS Plus 059443 18 210 150 SDS Plus 084162 8 110 50 SDS Plus 029392 310 250 SDS Plus 054271 160 100 SDS Plus 029415 460 400 SDS Plus 054332 210 150 SDS Plus 029453 20 210 150 SDS Plus 084179 310 250 SDS Plus 029484 310 250 SDS Plus 054288 460 400 SDS Plus 093034 460 400 SDS Plus 054349 10 110 50 SDS Plus 055728 160 100 SDS Plus 029422 Sets Pieces 210 150 SDS Plus 029460 104B 6, 8 x 110mm 5 075658 310 250 SDS Plus 029491 6, 8, 10 x 160mm 460 400 SDS Plus 054295 113D 6, 8, 10 x 110mm 7 060876 12 160 100 SDS Plus 029439 6, 8, 10, 12 x 160mm 210 150 SDS Plus 029477 310 250 SDS Plus 029507 Merchandiser** Pieces 460 400 SDS Plus 054301 SDS-11 6, 6.5, 8, 10, 12 x 160mm 11 406893 13 160 100 SDS Plus 093591 1 each 6, 6.5, 8, 10, 12, 14 x 210mm 210 150 SDS Plus 093638

SDS11 113D 104B 36 **Please refer to merchandiser section for individual codes when ordering.

www.sutton.com.au Drills B3Max SDS Max

Unique TCT 3 cutting edge self centering tip prevents snagging on reinforced mesh.

Professional quality, 30% faster than conventional SDS drills. Will drill through reinforced concrete mesh.

Shank Suits all SDS Max rotary hammer drills.

Square Spiral Flute Combining a compression channel Application with a depression Trade chamber gives an Professional instant result: perfectly Plumber controlled dust removal. Masonry

Discount Group A0608 Surface Finish Sandblasted Material TCT Point Type 3 Cutting Edge Packaging Plastic Tube Diameter O/A Length Flute Length Shank Item # 12 340 200 SDS Max 111806 540 400 SDS Max 111813 14 340 200 SDS Max 111820 540 400 SDS Max 111837 16 340 200 SDS Max 119383 540 400 SDS Max 119413 18 340 200 SDS Max 119390 540 400 SDS Max 119420 20 340 200 SDS Max 119406 540 400 SDS Max 119437

37 www.sutton.com.au Drills Ultimax SDS Max

6 Cutting Edges Self centering tip. Does not bind in concrete. Improved hole concentricity.

For deep core drilling in granite, marble, aerated concrete, brick, stone and hard stone. Will drill through reinforced concrete mesh.

Shank Suits all SDS Max rotary hammer drills.

Double Spiral Flute For long life and robustness, perfectly controlled dust removal and reduced vibration. Application Trade Professional Plumber Masonry

Discount Group A0608 Discount Group A0608 Surface Finish Sandblasted Surface Finish Sandblasted Material TCT Material TCT Point Type 6 Cutting Edges Point Type 6 Cutting Edges Packaging Plastic Tube Packaging Plastic Tube O/A Flute O/A Flute Diameter Length Length Shank Item # Diameter Length Length Shank Item # 16 340 200 SDS Max 004849 30 340 200 SDS Max 028760 540 400 SDS Max 004955 540 400 SDS Max 005228 690 550 SDS Max 005327 690 550 SDS Max 005426 920 780 SDS Max 005464 920 780 SDS Max 005563 18 340 200 SDS Max 004856 32 340 200 SDS Max 068278 540 400 SDS Max 005136 540 400 SDS Max 005235 690 550 SDS Max 005334 690 550 SDS Max 005433 920 780 SDS Max 005471 920 780 SDS Max 005570 20 340 200 SDS Max 004870 1300 850 SDS Max 028746 540 400 SDS Max 005150 1500 850 SDS Max 024151 690 550 SDS Max 005358 35 1300 850 SDS Max 063327 920 780 SDS Max 005495 36 340 200 SDS Max 063440 1300 850 SDS Max 063297 540 400 SDS Max 005259 1500 850 SDS Max 024120 690 550 SDS Max 005457 22 340 200 SDS Max 004887 920 780 SDS Max 005594 540 400 SDS Max 005167 1300 850 SDS Max 063334 690 550 SDS Max 005365 1500 850 SDS Max 024168 920 780 SDS Max 005501 38 340 200 SDS Max 063457 1300 850 SDS Max 063303 540 400 SDS Max 023093 24 340 200 SDS Max 004894 690 550 SDS Max 028685 540 400 SDS Max 005174 40 340 200 SDS Max 063464 690 550 SDS Max 005372 540 400 SDS Max 023109 920 780 SDS Max 005518 690 550 SDS Max 028692 1500 850 SDS Max 024137 920 780 SDS Max 005600 25 340 200 SDS Max 004900 1500 850 SDS Max 063365 540 400 SDS Max 005181 42 340 200 SDS Max 063402 690 550 SDS Max 005389 540 400 SDS Max 023116 920 780 SDS Max 005525 690 550 SDS Max 063389 1300 850 SDS Max 068193 920 780 SDS Max 021464 1500 850 SDS Max 037625 1300 850 SDS Max 063341 26 340 200 SDS Max 004917 1500 850 SDS Max 063372 540 400 SDS Max 005198 45 340 200 SDS Max 063471 690 550 SDS Max 005396 540 400 SDS Max 063419 28 340 200 SDS Max 068261 690 550 SDS Max 063396 540 400 SDS Max 005204 920 780 SDS Max 024113 690 550 SDS Max 005402 1300 850 SDS Max 063358 920 780 SDS Max 005549 1500 850 SDS Max 027091 1300 850 SDS Max 063310 1500 850 SDS Max 024144

www.sutton.com.au Drills Chisels, SDS Plus / SDS Max

Pointed Flat Angle Head Toothed Brick Chasing Concrete For general Targeted For easy Tungsten Ideal for cabling Chasing purpose chiselling and removal of tiles. carbide tipped and plumbing For cutting narrow chiselling and breaking work. for repointing, applications. channels. breaking work. removing bricks, tiles and plaster. Specially toughened steel and optimum cutter geometry ensure long life and fast, efficient work.

Application Demolition DIY Trade Electrician Plumber Carpenter Plasterer General Contractor Masonry Renovation

Discount Group A0608 Surface Finish Sandblasted Material High Tensile Steel Point Type Application Packaging Plastic Hang O/A Type Size Length Shank Item # SDS-Plus Pointed 14 250 SDS Plus 022171

Flat 20 250 SDS Plus 063518 40 200 SDS Plus 063525

Angled 40 200 SDS Plus 063648

Concrete Chasing 22 250 SDS Plus 063686

SDS-Max Pointed 18 280 SDS Max 063488 18 400 SDS Max 061521 18 600 SDS Max 063495

Flat 24 280 SDS Max 063549 24 400 SDS Max 061514 24 600 SDS Max 075368 50 360 SDS Max 063556 80 300 SDS Max 063563 115 350 SDS Max 063570

Angled 50 300 SDS Max 063655

Toothed 40 280 SDS Max 063662

Brick Chasing 35 380 SDS Max 063716

Concrete Chasing 26 300 SDS Max 063693

39 www.sutton.com.au Core Bits TCT, SDS Plus / SDS Max

Masonry Hammer Carbide Core Bits (Light Duty)

Core Bits SDS Plus Core Bits SDS Max Light duty for electrical equipment Heavy duty taper crown carbide and door frames. Core Bits drill core bit for building, plumbing bricks, limestone and Concrete and restoration work. For all types panel. For rotary hammer drills of hammer drills over 900W. not exceeding 700W. Masonry Adaptor

Drift Key Crown Adaptor Crown Pilot

Taper Crown Hammer Carbide Core Bits (Heavy Duty)

Discount Group A0608 Discount Group A0608 Surface Finish Sandblasted Surface Finish Sandblasted Material High Tensile Body, TCT Material High Tensile Body, TCT Packaging Plastic Tube Packaging Plastic Tube Working Working Diameter Length Teeth Shank Item # Diameter Length Teeth Shank Item # Masonry Hammer Carbide Core Bits (Light Duty) Taper Crown Hammer Carbide Core Bits (Heavy Duty) 25 60 5 SDS Plus 015937 30 90 5 SDS Max 016088 30 60 5 SDS Plus 015944 35 90 5 SDS Max 016095 35 60 5 SDS Plus 015951 40 90 6 SDS Max 012745 40 60 6 SDS Plus 015968 45 90 6 SDS Max 016101 45 60 6 SDS Plus 015975 50 90 7 SDS Max 016118 50 60 7 SDS Plus 015982 60 90 8 SDS Max 012752 60 60 8 SDS Plus 015999 66 90 8 SDS Max 012769 66 60 8 SDS Plus 016002 70 90 8 SDS Max 016125 68 60 8 SDS Plus 024250 80 90 9 SDS Max 016132 70 60 8 SDS Plus 016019 90 90 10 SDS Max 016149 80 60 9 SDS Plus 016026 100 90 11 SDS Max 012776 90 60 10 SDS Plus 016033 110 90 11 SDS Max 016156 *Core bits & adaptors sold separately 125 90 12 SDS Max 016163 Masonry Adaptor (Including Pilot Drill) *Core bits & adaptors sold separately 90 SDS Plus 063730 Crown Adaptor (Excluding Pilot Drill) 150 SDS Plus 016057 220 SDS Max 016194 200 SDS Plus 016064 420 SDS Max 012790 300 SDS Plus 016071 700 SDS Max 016200 135 Hexagonal 063747 900 SDS Max 063969 Crown Pilot Drill Taper centring drill bit 11x120 012806 Drift Key 012813

www.sutton.com.au Environmental Statement Diager and Sutton masonry drills are certified ISO 14001 for sustainable development. These products contribute to environmental protection by a “sandblasted” surface treatment which guarantees zero heavy metals and by a protection called “without VOC (Volatile Organic Compounds)” meeting the European directive 1999/13CE

Complies with PGM standards (PGM stands for “Prufgemeinschaft Mauerbohrer” - drill bit testing) and is the only guarantee of a perfect geometry for the precise drilling and preferred setting of your anchor studs. This marking is the proof for the suitability of the masonry drill bit. It is recommended to use only drill bits with this marking for anchor fixings to prevent accidents and liability cases. Shanks Parallel / Plain Shank The straight shank is the most usual style on modern drill bits, by number manufactured. Plain Shank It is most often made with the same diameter as the drill bit, for economy. It’s then held in a 3-jaw drill chuck. Very small bits can have straight shanks larger than the drill diameter, often for holding in a standard size collet. Large drill bits can have straight shanks smaller than their drill diameter, so that medium-size chucks can be used to drill large holes. Such a drill bit is called reduced-shank or a blacksmith’s drill. Hollow • Can be held in a collet chuck Shank • Can be held in a drill chuck, the commonest sort • Very accurate centering • Low torque transmission

Hex shank The flats of a hex shank can either be machined on a round shank or can be the natural flats of hex bar stock. A hex Hex Shank shank can be grasped by a 3-jaw drill chuck, or can be held in a custom chuck specifically for hex shanks. 1/4 inch hex shanks are common for machine screwdriver bits, and have spread from that application to be used for drill bits that are compatible with screwdriver machinery. • Can be held in a drill chuck • Can be held in a screwdriver bit chuck • High torque transmission • Moderately accurate centring 34mm •28.5mm Cannot be held in a collet

SDS shank SDS Multi 10mm The SDS shank has the advantage of a simple spring-loaded chuck, so that bits can be chucked with a simple and 25mm quick hand action. Further, the shank and chuck are uniquely suited to hammer drilling in stone and concrete. The drill bit is not held solidly in the chuck, but can slide back and forth like a piston. The hammer of the drill acts to accelerate27.5mm only the drill bit itself, and not the large mass of the chuck, which makes hammer drilling with an SDS shank drill bit much more productive than with other types of shank. So, SDS shanks are most often seen on masonry drills for SDSwhich Plus hammer drilling action is most helpful. 10mm

25mm SDS is available in four sizes, SDS, SDS plus (or SDS-plus or SDS+), SDS-Top and SDS-max. SDS-plus is the most

common68mm by count of tools manufactured, with masonry drills from 5mm diameter to 30mm diameter ordinarily available.64mm

SDS Max 18mm The SDS61.5mm bit was developed in 1975 and the name comes from the German saying “Steck - Dreh - Sitz” (Insert - Twist - Stay). German-speaking countries may use “Spannen Durch System” (Clamping System), though most use “Special Direct System” for international purposes. 34mm • Superb hammer drilling performance 28.5mm • Drills with a “rotation-stop” mode can use chiselling bits • One-handed quick chucking operation SDS Multi

10mm • Can only be held in an SDS chuck 25mm • High torque transmission The flute (spiral) with a long pitch (lead) permits a quick removal of the aggregates (dust) the new finishing (treatment) “sandblasted” strengthens 27.5mm the body of the drill in the surface while guaranteeing good flexibility. Ideal for SDS Plus soft and medium hard materials and for wet concrete. The shank is suitable 10mm for all SDS plus hammer drilling machines. 25mm

68mm 64mm

SDS Max 18mm

61.5mm 41 www.sutton.com.au no mess no fuss.... DRILL KLEEN Dust and Debris Collector The Drill Kleen innovation has potential for use by tradesmen, handymen, DIY and builders. Three major problem areas are addressed when you use Sutton Tools Drill Kleen: 1. Safety to the operator – there is no debris falling onto the operator and no risk of eye injury. 2. Clean Up – Drill Kleen catches dust and debris, less mess to clean up means saving your time. 3. Environment – Dust and debris in contained within the Drill Kleen boot, parts and boots are recyclable.

Features & Benefits • Prevents Mess • Increased efficiency • Increased safety • Suitable for ceilings and walls • Easy to use • Retro fit • Fits both keyless and keyed chuck drills • Suits up to 102mm holesaw • Can be used with regular drill bits

Drill Kleen kit consists of a drill adaptor, a sleeve collar complete with 3 varying thickness rubber seal bands and 1 clear rubber concertina boot.