DOCSLIB.ORG

Commodity Name 005-05 Abrasive Equipment and Tools 005-14

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text

Load more

NIGP Commodity Codes Commodity Name ABRASIVES 005-05 Abrasive Equipment and Tools 005-14 Abrasives, Coated: Cloth, Fiber, Sandpaper, etc. 005-21 Abrasives, Sandblasting, Metal 005-28 Abrasives, Sandblasting (Other than Metal) 005-42 Abrasives, Solid: Wheels, Stones, etc. 005-56 Abrasives, Tumbling (Wheel) Grinding and Polishing Compounds: Carborundum, Diamond, etc. (For Valve Grinding 005-63 Compounds See Class 075) 005-70 Pumice Stone 005-75 Recycled Abrasives Products and Supplies 005-84 Steel Wool, Aluminum Wool, Copper Wool, and Lead Wool ACOUSTICAL TILE, INSULATING MATERIALS, AND SUPPLIES 010-05 Acoustical Tile, All Types (Including Recycled Types) Acoustical Tile Accessories: Channels, Grids, Mounting Hardware, Rods, Runners, Suspension 010-08 Brackets, Tees, Wall Angles, and Wires 010-09 Acoustical Tile Insulation 010-11 Adhesives and Cements, Acoustical Tile 010-14 Adhesives and Cements, Insulation 010-17 Aluminum Foil, etc. 010-30 Bands, Clips, and Wires (For Pipe Insulation) 010-38 Clips, Pins, etc. (For Duct Insulation) 010-41 Cork: Blocks, Boards, Sheets, etc. 010-45 Exterior Insulation and Finish Systems 010-53 Fiberglass: Batts, Blankets and Rolls 010-56 Foam Glass: Blocks, Sheets, etc. 010-57 Foam-in-Place Insulation: Phenolic, Urethane, etc. 010-59 Foam Plastics: Blocks, Boards, Sheets, etc. 010-62 Insulation, Interior 010-63 Insulation, Blown Type 010-64 Insulation, Loose Fill 010-65 Jacketing (For Insulation): Canvas, Osnaburg, etc. 010-70 Magnesia: Blocks, Sheets, etc. 010-72 Mineral Wool: Blankets, Blocks, Boards 010-75 Paints, Primers, Sealers, etc. (For Insulation) 010-76 Paper Type Insulation Material (Cellulose, etc.) 010-78 Pipe and Tubing Insulation, All Types 010-81 Preformed Insulation, All Types (For Ells, Tees, Valves, etc.) 010-83 Recycled Insulation Materials and Supplies, All Types 010-84 Rubber Insulation ADDRESSING, COPYING, MIMEOGRAPH, AND SPIRIT DUPLICATING MACHINE SUPPLIES: CHEMICALS, INKS, PAPER, ETC. 015-06 Addressing Machine Supplies, Metal and Plastic Plate Type 015-10 Addressing Machine Supplies, Paper Plate Type Page 1 NIGP Commodity Codes Commodity Name ABRASIVES 015-15 Chemicals and Supplies, Dry (For Bond Paper Type Copying Machines) 015-16 Chemicals and Supplies, Wet (For Bond Paper Type Copying Machines) 015-20 Chemicals and Supplies (For Spirit Type Duplicating Machines) 015-25 Chemicals, Inks, and Supplies (For Mimeograph Machines) 015-38 Paper, Chemicals, and Supplies (For Blueline Machines) Paper, Chemicals, and Supplies (For Coated or Treated Paper Type Copying Machines) (See 305- 015-39 39 for Diazo Process Copy Machines) Paper, Chemicals, and Supplies (For Diffusion Transfer Type Copying Machines) (See 305-39 for 015-45 Diazo Process Copy Machines) Paper and Supplies (For Dual Spectrum Process Copying Machines) (See 305-39 for Diazo 015-55 Process Copy Machines) Paper, Chemicals, and Supplies (For Thermal Process Copying Machines) (See 305-39 for Diazo 015-70 Process Copy Machines) 015-77 Recycled Copying and Duplicating Supplies AGRICULTURAL CROPS AND GRAINS INCLUDING FRUITS, MELONS, NUTS, AND VEGETABLES 019-21 Berry Crops 019-24 Buckwheat 019-30 Corn 019-32 Cotton 019-41 Fruits, Citrus 019-42 Fruits, Deciduous Tree 019-47 Grapes 019-50 Hops 019-53 Melons 019-56 Nuts, Tree 019-60 Potatoes, Irish 019-62 Pumpkins 019-66 Rice 019-67 Rye 019-72 Sorghum 019-73 Soybeans 019-78 Sugarcane and Sugarbeets 019-85 Tobacco 019-90 Vegetables 019-94 Wheat AGRICULTURAL EQUIPMENT, IMPLEMENTS, AND ACCESSORIES (SEE CLASS 022 FOR PARTS) 020-02 Backhoe (For Farm Tractor) 020-04 Brush and Tree Chippers 020-06 Brush Cutters and Saws, Motor Driven 020-10 Counters, Acre Page 2 NIGP Commodity Codes Commodity Name ABRASIVES Cultivating Equipment, Farm: Go-Devils, Row Type Shovel Cultivators, Tooth and Spring 020-13 Harrows, etc. 020-14 Curb Edger, Heavy Duty, Tractor Mounted 020-15 Cutters and Shredders (Mowers), Heavy Duty, Flail: Tow Type and/or Center Mount Type Cutters and Shredders (Mowers), Heavy Duty, Reel and Rotary: Tow Type and/or Center Mount 020-16 Type 020-18 Dozer Blades (For Farm Tractors) 020-20 Drying Equipment, Grain 020-23 Ensilage Cutters 020-25 Farm Wagons 020-27 Feed Mills and Mixers 020-28 Feed Wagons 020-30 Fertilizer Applicators and Fittings, Liquid and Gas 020-31 Fertilizer Distributors, Dry, Commercial (See Class 515 for Lawn Type Distributors) 020-33 Garden Tractors, Cultivators, and Plows 020-34 Gang Mowers, Reel Type, Towed 020-35 Grain Bins and Tanks 020-36 Grading Machines for Seeds, Grains and Dried Vegetables 020-37 Grass Seed Strippers and Cleaners 020-39 Grass Spriggers and Seeders 020-40 Grinding Mills: Seed, Grain, Dried Vegetable Harvesting Equipment: Bean, Corn, and Pea Pickers and Shellers, Combines, Cotton and Fruit 020-41 Pickers, Headers, Sled Cutters and Threshers 020-43 Haying Equipment: Balers, Dryers, Elevators and Rakes, etc. 020-46 Herbicide, Insecticide and Fungicide Applicators and Distributors 020-49 Irrigation Equipment and Supplies, Agricultural 020-59 Land Levelers 020-61 Loaders, Tractor Mounted, Farm 020-62 Log Splitters 020-63 Manure Spreaders 020-64 Mower, Articulated Boom: Flail, Rotary, or Sickle Head Mower (Steep Slope Type with Cutter Head on Telescoping Boom): Flail, Rotary, or Sickle Bar 020-65 Cutter Heads, For Mounting on Tractors or Trucks (See Class 515 for Lawn Type Mowers) Mower, Tractor Mounted (Steep Slope Type with Cutter Head on Telescoping Boom): Flail, 020-66 Rotary, or Sickle Bar Cutter Heads (See Class 515 for Lawn Type Mowers) Mower-Tractor Unit or Self-Propelled Mower, for Slope Mowing (See Class 515 for Lawn Type 020-67 Mowers) 020-68 Mower, Center Mounted; and Tractor (See Class 515 for Lawn Type Mowers) Page 3 NIGP Commodity Codes Commodity Name ABRASIVES020-69 Pasture Renovators 020-71 Planting Equipment, Broadcasting 020-72 Planting Equipment, Drilling 020-73 Planting Equipment, Row Crop 020-74 Processing Machinery and Equipment, Agricultural 020-75 Posthole Diggers, Tractor Mounted 020-76 Protection Structures, Rollover (ROPS) 020-77 Pulverizers and Rotary Tillers, Soil 020-78 Recycled Agricultural Equipment Accessories and Supplies 020-79 Rock Pickers and Rakes 020-81 Rodent Control Equipment, Tractor Operated Spade, Tree (Truck or Trailer Mounted, or Three-Point Hook-Up for Tractor Mounting) and 020-82 other Tree Transplanting and Diggers 020-83 Sweeps and other Steel Shapes 020-84 Soil Mixers and Samplers 020-85 Terracing Equipment Tillage Equipment, Heavy Duty, Farm: Blade Plows, Disc Harrows, Listers, Rotary Hoes, Tool 020-87 Bars, etc. 020-89 Tractors, Farm, Wheel Type 020-90 Tree and Root Cutters and Stump Grinders, Tractor Mounted 020-91 Tree Girdlers and Timber Tongs 020-93 Umbrellas, Tractor 020-95 Unloaders and Elevators, Grain 020-96 Wedges, Steel, Tree Felling and Splitting AGRICULTURAL EQUIPMENT AND IMPLEMENT PARTS 022-04 Brush Chipper, Cutter and Saw Parts 022-13 Cultivating Equipment Parts 022-15 Cutter and Shredder (Mower), Flail, Rotary, Reel, and Sickle Bar Parts 022-30 Fertilizer Distributor Parts 022-41 Harvesting Equipment Parts 022-42 Haying Equipment Parts 022-43 Herbicide, Insecticide and Fungicide Applicator and Distributor Parts 022-49 Implement Parts for John Deere 022-51 Implement Parts for Ford 022-53 Implement Parts for International Harvester 022-58 Implement Parts for other Farm Equipment 022-62 Irrigation System Parts, Agricultural 022-70 Planting Equipment Parts 022-73 Posthole Digger (Tractor Mounted) Parts 022-74 Recycled Agricultural and Implement Parts 022-75 Sprigger and Seeder Parts, Grass 022-77 Tillage Equipment Parts Page 4 NIGP Commodity Codes Commodity Name ABRASIVES022-80 Tractor (Farm and Garden) Parts 022-82 Tree Spade and Forestry Equipment Parts 022-95 Unloader and Elevator (Grain) Equipment Parts 022-97 Wagon Parts AIR COMPRESSORS AND ACCESSORIES 025-10 Compressor, Bare Unit (Not Mounted or Powered), 15 HP and less 025-20 Compressor, Bare Unit (Not Mounted or Powered), over 15 HP 025-30 Compressor, Base or Tank Mounted, Electric Motor or Engine Driven, 15 HP and less; and Parts 025-40 Compressor, Base or Tank Mounted, Electric Motor or Engine Driven, Over 15 HP; and Parts 025-43 Compressor, High Pressure, All Sizes and Models 025-45 Compressor, Portable, Electric Motor or Engine Driven, 5 HP and less; and Parts 025-50 Compressor, Portable, Electric Motor or Engine Driven, over 25 CFM at 100 PSI; and Parts 025-55 Dryers, Desiccant Air 025-60 Filters, Air Gauges and Valves, Pressure Regulators, Shock Mounts, etc. 025-70 Moisture Separators, Non-Refrigerated 025-80 Moisture Separators, Refrigerated 025-85 Motors, Air Compressor 025-90 Recycled Air Compressor Accessories and Supplies AIR CONDITIONING, HEATING, AND VENTILATING EQUIPMENT, PARTS AND ACCESSORIES (SEE CLASS 740 ALSO) 031-02 Air Conditioning Units, Portable (For Computer Rooms, Hospital Rooms, Sporting Events, etc.) 031-03 Air Conditioners: Commercial, and Parts and Accessories not Individually Itemized Air Conditioners: Controlled Environment (For Computer Rooms, etc.), and Parts and 031-04 Accessories not Individually Itemized) Air Conditioners (Cooling and Cooling/Heating Types): Window and Wall Mounted, and Parts 031-05 and Accessories Not Individually Itemized Air Conditioning and Heating: Central Units, and Parts and Accessories Not Individually 031-06 Itemized 031-07 Air Circulation Equipment (Not Otherwise Classified) 031-08 Air Curtains 031-09 Air Flow Meters 031-10 Air Purifiers, Accessories and Supplies 031-11 Blowers: Industrial Types 031-13 Chillers, Heat Exchangers and Receivers
Recommended publications
  • Kemble Z3 Ephemera Collection

    Kemble Z3 Ephemera Collection

    http://oac.cdlib.org/findaid/ark:/13030/c818377r No online items Kemble Ephemera Collection Z3 Finding aid prepared by Jaime Henderson California Historical Society 678 Mission Street San Francisco, CA, 94105-4014 (415) 357-1848 [email protected] 2013 Kemble Ephemera Collection Z3 Kemble Z3 1 Title: Kemble Z3 Ephemera Collection Date (inclusive): 1802-2013 Date (bulk): 1900-1970 Collection Identifier: Kemble Z3 Extent: 185 boxes, 19 oversize boxes, 4 oversize folder (137 linear feet) Repository: California Historical Society 678 Mission Street San Francisco, CA 94105 415-357-1848 [email protected] URL: http://www.californiahistoricalsociety.org Location of Materials: Collection is stored onsite. Language of Materials: Collection materials are primarily in English. Abstract: The collection comprises a wide variety of ephemera pertaining to printing practice, culture, and history in the Western Hemisphere. Dating from 1802 to 2013, the collection includes ephemera created by or relating to booksellers, printers, lithographers, stationers, engravers, publishers, type designers, book designers, bookbinders, artists, illustrators, typographers, librarians, newspaper editors, and book collectors; bookselling and bookstores, including new, used, rare and antiquarian books; printing, printing presses, printing history, and printing equipment and supplies; lithography; type and type-founding; bookbinding; newspaper publishing; and graphic design. Types of ephemera include advertisements, announcements, annual reports, brochures, clippings, invitations, trade catalogs, newspapers, programs, promotional materials, prospectuses, broadsides, greeting cards, bookmarks, fliers, business cards, pamphlets, newsletters, price lists, bookplates, periodicals, posters, receipts, obituaries, direct mail advertising, book catalogs, and type specimens. Materials printed by members of Moxon Chappel, a San Francisco-area group of private press printers, are extensive. Access Collection is open for research.
  • Illustrator Draftsman 3&2

    Illustrator Draftsman 3&2

    NONRESIDENT TRAINING COURSE August 1999 Illustrator Draftsman 3&2 Volume 2—Standard Drafting Practices and Theory NAVEDTRA 14276 DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. Although the words “he,” “him,” and “his” are used sparingly in this course to enhance communication, they are not intended to be gender driven or to affront or discriminate against anyone. DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. PREFACE By enrolling in this self-study course, you have demonstrated a desire to improve yourself and the Navy. Remember, however, this self-study course is only one part of the total Navy training program. Practical experience, schools, selected reading, and your desire to succeed are also necessary to successfully round out a fully meaningful training program. COURSE OVERVIEW: In completing this nonresident training course, you will demonstrate a knowledge of the subject matter by correctly answering questions on the following subjects: composition, geometric construction, general drafting practices, technical drawings, perspective projections, and parallel projections. THE COURSE: This self-study course is organized into subject matter areas, each containing learning objectives to help you determine what you should learn along with text and illustrations to help you understand the information. The subject matter reflects day-to-day requirements and experiences of personnel in the rating or skill area. It also reflects guidance provided by Enlisted Community Managers (ECMs) and other senior personnel, technical references, instructions, etc., and either the occupational or naval standards, which are listed in the Manual of Navy Enlisted Manpower Personnel Classifications and Occupational Standards, NAVPERS 18068. THE QUESTIONS: The questions that appear in this course are designed to help you understand the material in the text.
  • Research and Development Washington, DC 20460 ABSTRACT

    Research and Development Washington, DC 20460 ABSTRACT

    United Slates EPA- 600 R- 95-045 7 Enwronmental Protection ZL6ILI Agency March 1995 i= Research and Developmen t OFFICE EQUIPMENT: DESIGN, INDOOR AIR EMISSIONS, AND POLLUTION PREVENTION OPPORTUNITIES Prepared for Office of Radiation and Indoor Air Prepared by Air and Energy Engineering Research Laboratory Research Triangle Park NC 2771 1 EPA REVIEW NOTICE This report has been reviewed by the U.S. Environmental Protection Agency, and approved for publication. Approval does not signify that the contents necessarily reflect the views and policy of the Agency, nor does mention of trade names or commercial products constitute endorsement or recommendation for use. This document is available to the public through the National Technical Informa- tion Service. Springfield, Virginia 22161. EPA- 600 I R- 95-045 March 1995 Office Equipment: Design, Indoor Air Emissions, and Pollution Prevention Opportunities by: Robert Hetes Mary Moore (Now at Cadmus, Inc.) Coleen Northeim Research Triangle Institute Center for Environmental Analysis Research Triangle Park, NC 27709 EPA Cooperative Agreement CR822025-01 EPA Project Officer: Kelly W. Leovic Air and Energy Engineering Research Laboratory Research Triangle Park, NC 2771 1 Prepared for: U.S. Environmental Protection Agency Ofice of Research and Development Washington, DC 20460 ABSTRACT The objective of this initial report is to summarize available information on office ~ equipment design; indoor air emissions of organics, ozone, and particulates from office ~ equipment; and pollution prevention approaches for reducing these emissions. It should be noted that much of the existing emissions data from office equipment are proprietary and not available in the general literature and are therefore not included in this report.
  • Class Item Description 5 0 ABRASIVES 5 5 Abrasive Equipment and Tools 5 14 Abrasives, Coated: Cloth, Fiber, Sandpaper, Etc

    Class Item Description 5 0 ABRASIVES 5 5 Abrasive Equipment and Tools 5 14 Abrasives, Coated: Cloth, Fiber, Sandpaper, Etc

    Class Item Description 5 0 ABRASIVES 5 5 Abrasive Equipment and Tools 5 14 Abrasives, Coated: Cloth, Fiber, Sandpaper, etc. 5 21 Abrasives, Sandblasting, Metal 5 28 Abrasives, Sandblasting (Other than Metal) 5 42 Abrasives, Solid: Wheels, Stones, etc. 5 56 Abrasives, Tumbling (Wheel) 5 63 Grinding and Polishing Compounds: Carborundum, Diamond, etc. (For Valve Grinding Compounds See Class 075) 5 70 Pumice Stone 5 75 Recycled Abrasives Products and Supplies 5 84 Steel Wool, Aluminum Wool, Copper Wool, and Lead Wool 10 0 ACOUSTICAL TILE, INSULATING MATERIALS, AND SUPPLIES 10 5 Acoustical Tile, All Types (Including Recycled Types) Acoustical Tile Accessories: Channels, Grids, Mounting Hardware, Rods, Runners, Suspension Brackets, Tees, Wall Angles, and 10 8 Wires 10 9 Acoustical Tile Insulation 10 11 Adhesives and Cements, Acoustical Tile 10 14 Adhesives and Cements, Insulation 10 17 Aluminum Foil, etc. 10 30 Bands, Clips, and Wires (For Pipe Insulation) 10 38 Clips, Pins, etc. (For Duct Insulation) 10 41 Cork: Blocks, Boards, Sheets, etc. 10 45 Exterior Insulation and Finish Systems 10 53 Fiberglass: Batts, Blankets and Rolls 10 56 Foam Glass: Blocks, Sheets, etc. 10 57 Foam-in-Place Insulation: Phenolic, Urethane, etc. 10 59 Foam Plastics: Blocks, Boards, Sheets, etc. 10 62 Insulation, Interior 10 63 Insulation, Blown Type 10 64 Insulation, Loose Fill 10 65 Jacketing (For Insulation): Canvas, Osnaburg, etc. 10 70 Magnesia: Blocks, Sheets, etc. 10 72 Mineral Wool: Blankets, Blocks, Boards 10 75 Paints, Primers, Sealers, etc. (For Insulation) 10 76 Paper Type Insulation Material (Cellulose, etc.) 10 78 Pipe and Tubing Insulation, All Types 10 81 Preformed Insulation, All Types (For Ells, Tees, Valves, etc.) 10 83 Recycled Insulation Materials and Supplies, All Types 10 84 Rubber Insulation 15 0 ADDRESSING, COPYING, MIMEOGRAPH, AND SPIRIT DUPLICATING MACHINE SUPPLIES: CHEMICALS, INKS, PAPER, ETC.
  • MEM09003B Prepare Basic Engineering Drawing

    MEM09003B Prepare Basic Engineering Drawing

    MEM05 Metal and Engineering Training Package MEM09003B Prepare basic engineering drawing Learner guide Version 1 Training and Education Support Industry Skills Unit Meadowbank Product code: 5516 MEM09003B Prepare basic engineering drawing Acknowledgement The TAFE NSW Training and Education Support Industry Skills Unit, Meadowbank would like to acknowledge the support and assistance of the following people in the production of this learner resource guide: Standards Australia Australian Standard AS 1100.101-1992 Technical drawing - General principles Writer: Warren Blackadder TAFE NSW Reviewer: Jim Miles Project Manager: Stephen Davies Education Programs Manager TAFE NSW Enquiries Enquiries about this and other publications can be made to: Training and Education Support Industry Skills Unit, Meadowbank Meadowbank TAFE Level 3, Building J See Street, MEADOWBANK NSW 2114 Tel: 02-9942 3200 Fax: 02-9942 3257 © TAFE NSW (Training and Education Support, Industry Skills Unit, Meadowbank) 2011 Copyright of this material is reserved to TAFE NSW Training and Education Support, Industry Skills Unit Meadowbank. Reproduction or transmittal in whole or in part, other than for the purposes of private study or research, and subject to the provisions of the Copyright Act, is prohibited without the written authority of TAFE NSW Training and Education Support, Industry Skills Unit Meadowbank. ISBN 978-1-74236-260-1 © TAFE NSW (Training & Education Support, Industry Skills Unit Meadowbank) 2011 MEM09003B Prepare basic engineering drawing Table of Contents
  • Illinois NIGP Listing

    Illinois NIGP Listing

    Illinois NIGP Listing Class 001 Business Enterprise Program 00 Business Enterprise Program Class 005 ABRASIVES 00 ABRASIVES - All 05 Abrasive Equipment and Tools 14 Abrasives; Coated: Cloth; Fiber; Sandpaper; etc; 21 Abrasives; Sandblasting; Metal 28 Abrasives; Sandblasting (Other than Metal) 42 Abrasives; Solid: Wheels; Stones; etc; 56 Abrasives; Tumbling (Wheel) 63 Grinding and Polishing Compounds: Carborundum; Diamond; etc; (For Valve Grinding Compounds See Class 075) 70 Pumice Stone 75 Recycled Abrasives Products and Supplies 84 Steel Wool; Aluminum Wool; Copper Wool; and Lead Wool Class 010 ACOUSTICAL TILE; INSULATING MATERIALS; AND SUPPLIES 00 ACOUSTICAL TILE; INSULATING MATERIALS; AND SUPPLIES - All 05 Acoustical Tile; All Types (Including Recycled Types) 08 Acoustical Tile Accessories: Channels; Grids; Mounting Hardware; Rods; Runners; Suspension Brackets; Tees; Wall Angles; and Wires 09 Acoustical Tile Insulation 11 Adhesives and Cements; Acoustical Tile 14 Adhesives and Cements; Insulation 17 Aluminum Foil; etc; 30 Bands; Clips; and Wires (For Pipe Insulation) 38 Clips; Pins; etc; (For Duct Insulation) 41 Cork: Blocks; Boards; Sheets; etc; 45 Exterior Insulation and Finish Systems 53 Fiberglass: Batts; Blankets and Rolls 56 Foam Glass: Blocks; Sheets; etc; 57 Foam-in-Place Insulation: Phenolic; Urethane; etc; 59 Foam Plastics: Blocks; Boards; Sheets; etc; 62 Insulation; Interior 63 Insulation; Blown Type Tuesday, February 11, 2014 Page 1 of 306 Illinois NIGP Listing Class 010 ACOUSTICAL TILE; INSULATING MATERIALS; AND SUPPLIES
  • Revised Draft Guidelines on Best Available

    Revised Draft Guidelines on Best Available

    REVISED DRAFT GUIDELINES ON BEST AVAILABLE TECHNIQUES AND PROVISIONAL GUIDANCE ON BEST ENVIRONMENTAL PRACTICES RELEVANT TO ARTICLE 5 AND ANNEX C OF THE STOCKHOLM CONVENTION ON PERSISTENT ORGANIC POLLUTANTS GENEVA, SWITZERLAND DECEMBER 2006 TABLE OF CONTENTS SECTION I : INTRODUCTION I. A PURPOSE I. B STRUCTURE OF DOCUMENT AND USING GUIDELINES AND GUIDANCE I. C CHEMICALS LISTED IN ANNEX C: DEFINITIONS, RISKS, TOXICITY I. D ARTICLE 5 AND ANNEX C OF THE STOCKHOLM CONVENTION I. E RELATIONSHIP TO THE BASEL CONVENTION I. F RELATIONSHIP TO OTHER ENVIRONMENTAL CONCERNS SECTION II: CONSIDERATION OF ALTERNATIVES IN THE APPLICATION OF BEST AVAILABLE TECHNIQUES II. A CONSIDERATION OF ALTERNATIVES IN THE STOCKHOLM CONVENTION II. B CONSIDERATION OF ALTERNATIVES FOR NEW SOURCES: A CHECKLIST APPROACH II. C OTHER CONSIDERATIONS OF THE STOCKHOLM CONVENTION SECTION III: BEST AVAILABLE TECHNIQUES AND BEST ENVIRONMENTAL PRACTICES: GUIDANCE, PRINCIPLES AND CROSS-CUTTING CONSIDERATIONS III.A GUIDANCE III.B GENERAL PRINCIPLES III.C CROSS-CUTTING CONSIDERATIONS: (I) CHEMICALS LISTED IN ANNEX C: FORMATION MECHANISMS (II) WASTE MANAGEMENT CONSIDERATIONS (III) CO-BENEFITS OF BEST AVAILABLE TECHNIQUES FOR CHEMICALS LISTED IN ANNEX C (IV) MANAGEMENT OF FLUE GAS AND OTHER RESIDUES (V) TRAINING OF DECISION MAKERS AND TECHNICAL PERSONNEL (VI) TESTING, MONITORING AND REPORTING SECTION IV: COMPILATION OF SUMMARIES FROM THE SOURCE CATEGORIES INCLUDED IN SECTIONS V AND VI SECTION V: GUIDANCE/GUIDELINES BY SOURCE CATEGORIES: SOURCE CATEGORIES IN PART II OF ANNEX C V.A WASTE
  • MEM30032A – Produce Basic Engineering Drawings Blackline

    MEM30032A – Produce Basic Engineering Drawings Blackline

    MEM30032A – Produce basic engineering drawings First Published December 2014 This work is copyright. Any inquiries about the use of this material should be directed to the publisher. Edition 1 – December 2014 Blackline Design 1st December 2014 – Edition 1 P a g e | 1 MEM30032A – Produce basic engineering drawings Conditions of Use: Unit Resource Manual Manufacturing Skills Australia Courses This Student’s Manual has been developed by BlackLine Design for use in the Manufacturing Skills Australia Courses. It is supplied free of charge for use in approved courses only. All rights reserved. No part of this publication may be printed or transmitted in any form by any means without the explicit permission of the writer. Statutory copyright restrictions apply to this material in digital or hard copy. Copyright BlackLine Design 2014 Blackline Design 1st December 2014 – Edition 1 P a g e | 2 MEM30032A – Produce basic engineering drawings Feedback: Your feedback is essential for improving the quality of these manuals. This resource has not been technically edited. Please advise BlackLine Design of any changes, additions, deletions or anything else you believe would improve the quality of this Student Workbook. Don’t assume that someone else will do it. Your comments can be made by photocopying the relevant pages and including your comments or suggestions. Forward your comments to: BlackLine Design [email protected] Sydney, NSW 2000 Blackline Design 1st December 2014 – Edition 1 P a g e | 3 MEM30032A – Produce basic engineering drawings Aims of the Competency Unit: This unit of competency covers producing drawings or similar graphical representations where the critical dimensions and associated tolerances and design specifications are predetermined.
  • Journal of San Diego History V49

    Journal of San Diego History V49

    GUIDE TO THE ARCHITECTURAL RECORDS COLLECTION ■ Unless listed in the description there was no date or address available on the architectural designs, and the buildings are in San Diego unless otherwise indicated. Abbott, Merket and Company, New York AD 1036 1959 Brownlines and bluelines. Marston Building, addition to old Marston Building, parking and elevators on the corner of C Street, 5th Ave. and B Street, 11 brownlines, 12 bluelines, July 21, 1959. Adams, Frank AD 1043 1910 Photocopy. Spreckels Aeolian Pipe Organ No. 1845 (in the residence of J.D. Spreckels), interior layout, three manuals and pedals, photocopy, May 23, 1910. Albright, Harrison (1866-1932) AD 1042 1913-1927 Blueprints and bluelines. U.S. Grant Hotel, elevations, floor plans, and interior details, 26 blueprints. See also Stevenson, Frank W. for alterations. The Workingman’s Hotel (Golden West Hotel), north side of G Street, between 3rd and 4th Streets, 7 bluelines, 1913. Alderson, Ray (1888-1973) AD 1040 1952 Blueprints. Jacobs, Theodore, Dental Offices, additions and alterations, 3355 Fourth Ave., 11 blueprints, February 15, 1952 – May 6, 1952. Allen, Frank P., Jr. (1880-1943) AD 1038 Blueprints. San Diego Tuberculosis Hospital, elevations and interior details, 5 blueprints. See also Quayle Brothers and Frank W. Stevenson and Bertram Goodhue. Allied Architects Association of Los Angeles AD 1080 Positive photostats. County of Los Angeles, Olive View Sanitarium, acute tuberculosis hospital building, 10 positive photostats. 135 THE JOURNAL OF SAN DIEGO HISTORY American Institute of Architects, San Diego Chapter, Downtown Remodeling Committee, headed by Robert Mosher AD 1221 1962-1964 Bluelines, site plan and plot plans, newspaper articles, pencil sketches on tracing paper, and blueprints.
  • 10.1 Introduction 10.2 Information Distribution

    10.1 Introduction 10.2 Information Distribution

    Structure 10.1 Introduction Objectives 10.2 Information Distribution 10.3 Typewriters 10.4 Duplicating Processes Spirit Duplicating Stencil Duplicating • Offsct Litho Duplicating 10.5 Copying 10.6 Auxiliary Methods 10.7 Facsimile 10.8 Summary 10.9 Terminal Questions 10.10 Answers 10.1 INTRODUCTION Like any other office we need equipment to provide for information distribution in the laboratory office also. For information distribution we require multiple copies of various letters and document which can be handed over,personally or mailed to the concerned persons. A variety of office machines and equipment's are now available for preparing documents and making multiple copies. In this unit we will cover the following: i) various kinds of typewriters and their uses, ii) various reprographic processes for information distribution. Objectives After studying this unit you should be able to: list various types of reprographic methods, describe uses of various kinds of typewriters, explain duplicating and copying processes and describe materials and machines required for the purpose, compare the advantages and disadvantages of spirit, stencil and litho duplication, and describe the uses of microfiche and facsimile. 10.2 INFORMATION DISTRIBUTION The organization and management of any institution, be it an isolated lab or a large site with many labs, requires that information is managed. Methods of managing information - selecting it and distributing it to the right people - are the subject of separate study, usually under the heading of 'Information Technology'. Here we will restrict ourselves to information distribution. Laboratory In unit 9 we discussed some of the most efficient ways of managing Organisation and information with the use of computers.
  • NCFR122 Foundations of Reprography Duration: 75 Hours Credit Units: 5 Module Overview Reproduction of Documents Is an Important Service of Providing Exact Copies Of

    NCFR122 Foundations of Reprography Duration: 75 Hours Credit Units: 5 Module Overview Reproduction of Documents Is an Important Service of Providing Exact Copies Of

    NCFR122 Foundations of Reprography Duration: 75 hours Credit units: 5 Module Overview Reproduction of documents is an important service of providing exact copies of information and helps to preserve the original documents. The module is therefore intended to introduce learners to reprographic methods and the equipment used in the reproduction of information. Learners will acquire skills to operate reprographic machines and care for their conservation. Learning Outcomes By the end of this module, the learner should be able to: i) Reproduce documents using reprographic machines. ii) Produce information digitally. Reading list 1. Artuff TA (2014). Reprography in University libraries and copyright laws. ESS-ESS publications New Delhi. 2. UC (2012)Reprographic guidelines. Printing and Reprographics; Atlanta printing plant. 3. Sayre, Irene H (1947).Photography and plate-making for photo-lithography. 3 ed. Chicago, Ill., Lithographic Textbook Publishing Co. NCRM122 Lecture Notes Compiled version 3 by Mr. SAMUELMATHEW OLAUN 2020 Page WhatsApp +256 777034420. Email: [email protected] 1 of 37 Sub-module 1 Reprography Duration: 8 Hours Content Meaning of reprography Developing reprographic program Reprographic activities Competences The learner: Develops the reprographic program to be followed when reproducing documents. NCRM122 Lecture Notes Compiled version 3 by Mr. SAMUELMATHEW OLAUN 2020 Page WhatsApp +256 777034420. Email: [email protected] 2 of 37 Devises protective measures to keep documents safe. Meaning of reprography Paper is material manufactured in thin sheets from the pulp of wood or other fibrous substances used for writing, drawing or printing or as wrapping material. Reprography refers to the production of copies from an original material to ensure longevity of the information contained in a given material.
  • 05 Abrasive Equipment and Tools 005 - 14 Abrasives, Coated: Cloth, Fiber, Sandpaper, Etc

    05 Abrasive Equipment and Tools 005 - 14 Abrasives, Coated: Cloth, Fiber, Sandpaper, Etc

    ITEM DESCRIPTION Class Item 005 ABRASIVES 005 - 05 Abrasive Equipment and Tools 005 - 14 Abrasives, Coated: Cloth, Fiber, Sandpaper, etc. 005 - 21 Abrasives, Sandblasting, Metal 005 - 28 Abrasives, Sandblasting (Other than Metal) 005 - 42 Abrasives, Solid: Wheels, Stones, etc. 005 - 56 Abrasives, Tumbling (Wheel) 005 - 63 Grinding and Polishing Compounds: Carborundum, Diamond, etc. 005 - 70 Pumice Stone 005 - 75 Recycled Abrasives Products and Supplies 005 - 84 Steel Wool, Aluminum Wool, Copper Wool, and Lead Wool 010 ACOUSTICAL TILE, INSULATING MATERIALS, AND 010 - 05 Acoustical Tile, All Types (Including Recycled Types) 010 - 08 Acoustical Tile Accessories: Channels, Grids, Mounting Hardware, 010 - 09 Acoustical Tile Insulation 010 - 11 Adhesives and Cements, Acoustical Tile 010 - 14 Adhesives and Cements, Insulation 010 - 17 Aluminum Foil, etc. 010 - 30 Bands, Clips, and Wires (For Pipe Insulation) 010 - 38 Clips, Pins, etc. (For Duct Insulation) 010 - 41 Cork: Blocks, Boards, Sheets, etc. 010 - 45 Exterior Insulation and Finish Systems 010 - 53 Fiberglass: Batts, Blankets and Rolls 010 - 56 Foam Glass: Blocks, Sheets, etc. 010 - 57 Foam-in-Place Insulation: Phenolic, Urethane, etc. 010 - 59 Foam Plastics: Blocks, Boards, Sheets, etc. 010 - 62 Insulation, Interior 010 - 63 Insulation, Blown Type 010 - 64 Insulation, Loose Fill 010 - 65 Jacketing (For Insulation): Canvas, Osnaburg, etc. 010 - 70 Magnesia: Blocks, Sheets, etc. 010 - 72 Mineral Wool: Blankets, Blocks, Boards 010 - 75 Paints, Primers, Sealers, etc. (For Insulation) 010 - 76 Paper Type Insulation Material (Cellulose, etc.) 010 - 78 Pipe and Tubing Insulation, All Types 010 - 81 Preformed Insulation, All Types (For Ells, Tees, Valves, etc.) 010 - 83 Recycled Insulation Materials and Supplies, All Types 010 - 84 Rubber Insulation 015 - ADDRESSING, COPYING, MIMEOGRAPH, AND SPIRIT DUPLICATING MACHINE SUPPLIES: CHEMICALS, INKS, PAPER, ETC.