<<

TITLE 9. HEALTH SERVICES

CHAPTER 8: DEPARTMENT OF HEALTH SERVICES

FOOD, RECREATIONAL AND INSTITUTIONAL

ARTICLE 1. AND DRINK

Contents

CHAPTER 1 PURPOSE AND DEFINITIONS 1 CHAPTER 2 MANAGEMENT AND PERSONNEL 18 CHAPTER 3 FOOD 35 CHAPTER 4 EQUIPMENT, UTENSILS, AND LINENS 77 CHAPTER 5 WATER, PLUMBING, AND WASTE 118 CHAPTER 6 PHYSICAL FACILITIES 137 CHAPTER 7 POISONOUS OR TOXIC MATERIALS 153 CHAPTER 8 COMPLIANCE AND ENFORCEMENT 160

Chapter 1 Purpose and Definitions

1-1 TITLE, INTENT, SCOPE 1

1-101 Title 1 R9-8-102. Applicability 1

1-2 DEFINITIONS 2

1-201 Applicability and Terms Defined 2

i Chapter 2 Management and Personnel

2-1 SUPERVISION 19

2-101 Responsibility 19 2-102 Knowledge 19 2-103 Duties 21

2-2 EMPLOYEE HEALTH 23

2-201 Disease or Medical Condition 23

2-3 PERSONAL CLEANLINESS 29

2-301 Hands and Arms 29 2-302 Fingernails 32 2-303 Jewelry 32 2-304 Outer Clothing 32

2-4 HYGIENIC PRACTICES 33

2-401 Food Contamination Prevention 33 2-402 Hair Restraints 33 2-403 Animals 34

Chapter 3 Food

3-1 CHARACTERISTICS 35

3-101 Condition 35

3-2 SOURCES, SPECIFICATIONS, AND ORIGINAL CONTAINERS AND RECORDS 36

3-201 Sources 36 3-202 Specifications for Receiving 40 3-203 Original Containers and Records 43

ii 3-3 PROTECTION FROM CONTAMINATION AFTER RECEIVING 45

3-301 Preventing Contamination by Employees 45 3-302 Preventing Food and Ingredient Contamination 46 3-303 Preventing Contamination from Ice Used as a Coolant 48 3-304 Preventing Contamination from Equipment, Utensils, and Linens 49 3-305 Preventing Contamination from the Premises 52 3-306 Preventing Contamination by Consumers 53 3-307 Preventing Contamination from Other Sources 55

3-4 DESTRUCTION OF ORGANISMS OF CONCERN 55

3-401 55 3-402 Freezing 59 3-403 Reheating 59

3-5 LIMITATION OF GROWTH OF ORGANISMS OF PUBLIC HEALTH CONCERN 60

3-501 Temperature and Time Control 60 3-502 Specialized Processing Methods 68

3-6 FOOD IDENTITY, PRESENTATION, AND ON-PREMISES LABELING 71

3-601 Accurate Representation 71 3-602 Labeling 71 3-603 Consumer Advisory 73

3-7 CONTAMINATED FOOD 73

3-701 Disposition 73

3-8 SPECIAL REQUIREMENTS FOR HIGHLY SUSCEPTIBLE POPULATIONS 74

3-801 Additional Safeguards 74

iii Chapter 4 Equipment, Utensils, and Linens

4-1 MATERIALS FOR CONSTRUCTION AND REPAIR 77

4-101 Multiuse 77 4-102 Single-Service and Single-Use 80

4-2 DESIGN AND CONSTRUCTION 81

4-201 Durability and Strength 81 4-202 Cleanability 81 4-203 Accuracy 83 4-204 Functionality 84 4-205 Acceptability 92

4-3 NUMBERS AND CAPACITIES 93

4-301 Equipment 93 4-302 Utensils, Temperature Measuring Devices, and Testing Devices 95

4-4 LOCATION AND INSTALLATION 96

4-401 Location 96 4-402 Installation 97

4-5 MAINTENANCE AND OPERATION 98

4-501 Equipment 98 4-502 Utensils and Temperature and Pressure Measuring Devices 103

4-6 CLEANING OF EQUIPMENT AND UTENSILS 104

4-601 Objective 104 4-602 Frequency 104 4-603 Methods 108

4-7 SANITIZATION OF EQUIPMENT AND UTENSILS 111

4-701 Objective 111 4-702 Frequency 111

iv 4-703 Methods 112

4-8 LAUNDERING 113

4-801 Objective 113 4-802 Frequency 113 4-803 Methods 113

4-9 PROTECTION OF CLEAN ITEMS 114

4-901 Drying 114 4-902 Lubricating and Reassembling 115 4-903 Storing 115 4-904 Handling 117

Chapter 5 Water, Plumbing, and Waste

5-1 WATER 117

5-101 Source 117 5-102 Quality 118 5-103 Quantity and Availability 119 5-104 Distribution, Delivery, and Retention 119

5-2 PLUMBING SYSTEM 120

5-201 Materials 120 5-202 Design, Construction, and Installation 121 5-203 Numbers and Capacities 122 5-204 Location and Placement 123 5-205 Operation and Maintenance 123

5-3 MOBILE WATER TANK AND MOBILE FOOD ESTABLISHMENT WATER TANK 125

5-301 Materials 125 5-302 Design and Construction 126 5-303 Numbers and Capacities 127 5-304 Operation and Maintenance 128

5-4 SEWAGE, OTHER WASTE, AND RAINWATER 129

5-401 Mobile Holding Tank 129 5-402 Retention, Drainage, and Delivery 129

v 5-403 Disposal Facility 130

5-5 REFUSE, RECYCLABLES, AND RETURNABLES 131

5-501 Facilities on the Premises 131 5-502 Removal 135 5-503 Facilities for Disposal and Recycling 135

Chapter 6 Physical Facilities

6-1 MATERIALS FOR CONSTRUCTION AND REPAIR 137

6-101 Indoor Areas 137 6-102 Outdoor Areas 137

6-2 DESIGN, CONSTRUCTION, AND INSTALLATION 137

6-201 Cleanability 137 6-202 Functionality 139

6-3 NUMBERS AND CAPACITIES 143

6-301 Handwashing Facilities 143 6-302 Toilets and Urinals 144 6-303 Lighting 144 6-304 Ventilation 145 6-305 Dressing Areas and Lockers 145 6-306 Service Sinks 145

6-4 LOCATION AND PLACEMENT 146

6-401 Handwashing Facilities 146 6-402 Toilet Rooms 146 6-403 Employee Accommodations 146 6-404 Distressed Merchandise 146 6-405 Refuse, Recyclables, and Returnables 147

6-5 MAINTENANCE AND OPERATION 147

6-501 Premises, Structures, Attachments, and Fixtures - Methods 147

vi Chapter 7 Poisonous or Toxic Materials

7-1 LABELING AND IDENTIFICATION 153

7-101 Original Containers 153 7-102 Working Containers 153

7-2 OPERATIONAL SUPPLIES AND APPLICATIONS 154

7-201 Storage 154 7-202 Presence and Use 154 7-203 Container Prohibitions 155 7-204 Chemicals 155 7-205 Lubricants 156 7-206 Pesticides 156 7-207 157 7-208 First Aid Supplies 157 7-209 Other Personal Care Items 157

7-3 STOCK AND RETAIL SALE 159

7-301 Storage and Display 159

Chapter 8 Compliance and Enforcement

8-1 CODE APPLICABILITY 160

8-101 Use for Intended Purpose 160 8-102 Additional Requirements 160 8-103 Variances 161

8-2 PLAN SUBMISSION AND APPROVAL 163

8-201 Facility and Operating Plans 163 8-203 Construction Inspection and Approval 165

8-3 LICENSE TO OPERATE 167

8-301 Requirement 167

vii R9-8-103. Food Establishment License Application 167 R9-8-104. Time-frames 169 R9-8-105. Issuance of License 174 8-304 Conditions of Retention 174 R9-8-106. License Suspension or Revocation 176

8-4 INSPECTION AND CORRECTION OF VIOLATIONS 177

R9-8-108. Inspection Standardization and Documentation 177 8-401 Frequency 179 8-402 Access 180 8-403 Report of Findings 182 8-404 Imminent Health Hazard 183 8-405 Critical Violation 183 8-406 Noncritical Violation 185 R9-8-109 Cease and Desist and Abatement 185

viii Chapter 1 Purpose and Definitions

Parts

1-1 TITLE, INTENT, SCOPE 1-2 DEFINITIONS

1-1 TITLE, INTENT, SCOPE

Subparts

1-101 Title R9-8-102 Applicability 1-102 Intent 1-103 Scope

This document incorporates the proposed rule as published in the Arizona Administrative Register on July 14, 2000 and the portions of the Food Code: 1999 Recommendations of the United States Public Health Service, Food and Drug Administration that are incorporated into the proposed rule by reference. Chapter 8 of this document includes license application procedures, time-frames as required by the Administrative Procedure Act, license format, license suspension and revocation, inspection standardization and documentation, and cease and desist and abatement.

Title 1-101.10 Food Code.

These provisions shall be known as the Food Code, hereinafter referred to as ?this Code.”

R9-8-102. Applicability

This Article does not apply to the following:

1. Beneficial use of wildlife meat authorized in A.R.S. § 17-240 and A.A.C. Title 12, Chapter 4, Article 1;

2. and milk products, which shall comply with A.R.S. Title 3,

1 Chapter 4 and A.A.C. Title 3, Chapter 2, Article 8;

3. Group homes, as defined in A.R.S. Title 36, Chapter 5.1, Article 1;

4. Child care group homes, as defined in A.R.S. Title 36, Chapter 7.1, Article 4;

5. Residential group care facilities, as defined in A.A.C. Title 6, Chapter 5, Article 74, that have 20 or fewer clients;

6. Assisted living homes, as defined in A.A.C. Title 9, Chapter 10, Article 7;

7. Adult day health care services, as defined in A.A.C. Title 9, Chapter 10, Article 7, that have 15 or fewer clients; and

8. Behavioral health service agencies licensed under A.A.C. Title 9, Chapter 20, that provide residential or partial care services for 10 or fewer clients.

1-2 DEFINITIONS

Subpart

1-201 Applicability and Terms Defined

Applicability and 1-201.10 Statement of Application and Listing of Terms. Terms Defined

(A) The following definitions apply in the interpretation and application of this Code.

(B) Terms Defined.

(1) Accredited program.

(a) "Accredited program" means a food protection manager certification program that has been evaluated and listed by an accrediting agency as conforming to national standards for organizations that certify individuals.

(b) "Accredited program" refers to the certification process and is a designation based upon an independent evaluation of factors such as the sponsor's mission; organizational structure; staff resources; revenue sources; policies; public information regarding program scope, eligibility

2 requirements, re-certification, discipline and grievance procedures; and test development and administration.

(c) "Accredited program" does not refer to training functions or educational programs.

(2) Additive.

(a) "" has the meaning stated in A.R.S. § 36-901(7).

(b) "Color additive" has the meaning stated in A.R.S. § 36-901(2).

(3) "Adulterated" means possessing 1 or more of the conditions enumerated in A.R.S. § 36-904(A).

(3a) “Agency” means any board, commission, department, office, or other administrative unit of the federal government, the state, or a political subdivision of the state.

(3b) “Applicant” means the following PERSON requesting a LICENSE:

a. If an individual, the individual who owns the FOOD ESTABLISHMENT;

b. If a corporation, any 2 officers of the corporation;

c. If a limited liability company, the designated manager or, if no manager is designated, any 2 members of the limited liability company;

d. If a partnership, any 2 of the partners;

e. If a joint venture, any 2 individuals who signed the joint venture agreement;

f. If a trust, the trustee of the trust;

g. If a religious or nonprofit organization, the individual in the senior leadership position within the organization.

h. If a school district, the superintendent of the district;

i. If an agency, the individual in the senior leadership position within the agency; or

j. If a county, municipality, or other political subdivision of the state, the individual in the senior leadership position within the county, municipality, or political subdivision.

3 (4) "Approved" means acceptable to the REGULATORY AUTHORITY or to the FOOD regulatory agency that has jurisdiction based on a determination of conformity with principles, practices, and generally recognized standards that protect public health.

(5) "aw" means water activity which is a measure of the free moisture in a FOOD, is the quotient of the water vapor pressure of the substance divided by the vapor pressure of pure water at the same temperature, and is indicated by the symbol aw.

(6) "Beverage" means a liquid for , including water.

(7) "Bottled " means water that is SEALED in bottles, packages, or other containers and offered for sale for consumption, including bottled mineral water.

(8) "Certification number" means a unique combination of letters and numbers assigned by a SHELLFISH CONTROL AUTHORITY to a MOLLUSCAN SHELLFISH dealer according to the provisions of the National Shellfish Sanitation Program.

(9) CIP.

(a) "CIP" means cleaned in place by the circulation or flowing by mechanical means through a piping system of a detergent solution, water rinse, and SANITIZING solution onto or over EQUIPMENT surfaces that require cleaning, such as the method used, in part, to clean and SANITIZE a frozen machine.

(b) "CIP" does not include the cleaning of EQUIPMENT such as band saws, slicers, or mixers that are subjected to in-place manual cleaning without the use of a CIP system.

(10) "CFR" means CODE OF FEDERAL REGULATIONS. Citations in this Code to the CFR refer sequentially to the Title, Part, and Section numbers, such as 21 CFR 178.1010 refers to Title 21, Part 178, Section 1010.

(11) "Code of Federal Regulations" means the compilation of the general and permanent rules published in the Federal Register by the executive departments and agencies of the federal government which:

(a) Is published annually by the U.S. Government Printing Office; and

(b) Contains FDA rules in 21 CFR, USDA rules in 7 CFR and 9 CFR, EPA rules in 40 CFR, and Wildlife and Fisheries rules in 50 CFR.

(12) Comminuted.

(a) "Comminuted" means reduced in size by methods including chopping, flaking, grinding, or mincing.

4 (b) "Comminuted" includes FISH or MEAT products that are reduced in size and restructured or reformulated such as gefilte FISH, gyros, ground beef, and sausage; and a of 2 or more types of MEAT that have been reduced in size and combined, such as sausages made from 2 or more MEATS.

(13) "Confirmed disease outbreak" means a FOODBORNE DISEASE OUTBREAK in which laboratory analysis of appropriate specimens identifies a causative agent and epidemiological analysis implicates the FOOD as the source of the illness.

(14) "Consumer" means a PERSON who is a member of the public, takes possession of FOOD, is not functioning in the capacity of an operator of a FOOD ESTABLISHMENT, and does not offer the FOOD for resale.

(15) "Corrosion-resistant material" means a material that maintains acceptable surface cleanability characteristics under prolonged influence of the FOOD to be contacted, the normal use of cleaning compounds and SANITIZING solutions, and other conditions of the use environment.

(16) "Critical control point" means a point or procedure in a specific FOOD system where loss of control may result in an unacceptable health risk.

(17) Critical Item.

(a) "Critical item" means a provision of this Code, that, if in noncompliance, is more likely than other violations to contribute to FOOD contamination, illness, or HAZARD.

(b) "Critical item" is an item that is denoted in this Code with an asterisk *.

(18) "Critical limit" means the maximum or minimum value to which a physical, biological, or chemical parameter must be controlled at a CRITICAL CONTROL POINT to minimize the risk that the identified HAZARD may occur.

(18a) “Department” means the Arizona Department of Health Services.

(19) Drinking Water.

(a) "Drinking water" means water that meets 40 CFR 141 National Primary Drinking Water Regulations.

(b) "Drinking water" is traditionally known as "potable water."

(c) "Drinking water" includes the term "water" except where the term used connotes that the water is not potable, such as "boiler water," "mop water," "rainwater," "wastewater," and "nondrinking" water.

5 (20) "Dry storage area" means a room or area designated for the storage of PACKAGED or containerized bulk FOOD that is not POTENTIALLY HAZARDOUS and dry goods such as SINGLE-SERVICE items.

(21) Easily Cleanable.

(a) "Easily cleanable" means a characteristic of a surface that:

(i) Allows effective removal of soil by normal cleaning methods;

(ii) Is dependent on the material, design, construction, and installation of the surface; and

(iii) Varies with the likelihood of the surface's role in introducing pathogenic or toxigenic agents or other contaminants into FOOD based on the surface's APPROVED placement, purpose, and use.

(b) "Easily cleanable" includes a tiered application of the criteria that qualify the surface as EASILY CLEANABLE as specified under Subparagraph (a) of this definition to different situations in which varying degrees of cleanability are required such as:

(i) The appropriateness of stainless steel for a FOOD preparation surface as opposed to the lack of need for stainless steel to be used for floors or for tables used for CONSUMER dining; or

(ii) The need for a different degree of cleanability for a utilitarian attachment or accessory in the as opposed to a decorative attachment or accessory in the CONSUMER dining area.

(22) "Easily movable" means:

(a) Portable; mounted on casters, gliders, or rollers; or provided with a mechanical means to safely tilt a unit of EQUIPMENT for cleaning; and

(b) Having no utility connection, a utility connection that disconnects quickly, or a flexible utility connection line of sufficient length to allow the EQUIPMENT to be moved for cleaning of the EQUIPMENT and adjacent area.

(23) "Employee" means the LICENSE HOLDER, PERSON IN CHARGE, PERSON having supervisory or management duties, PERSON on the payroll, family member, volunteer, PERSON performing work under contractual agreement, or other PERSON working in a FOOD ESTABLISHMENT.

(24) "EPA" means the U.S. Environmental Protection Agency.

6 (25) Equipment.

(a) "Equipment" means an article that is used in the operation of a FOOD ESTABLISHMENT such as a freezer, grinder, hood, ice maker, MEAT block, mixer, oven, reach-in refrigerator, scale, sink, slicer, stove, table, TEMPERATURE MEASURING DEVICE for ambient air, VENDING MACHINE, or WAREWASHING machine.

(b) "Equipment" does not include items used for handling or storing large quantities of PACKAGED that are received from a supplier in a cased or overwrapped lot, such as hand trucks, forklifts, dollies, pallets, racks, and skids.

(25a) “FC” means the United States Food and Drug Administration publication, Food Code: 1999 Recommendations of the United States Public Health Service, Food and Drug Administration (1999), as modified and incorporated by reference in A.A.C. R9-8- 107.

(26) Fish.

(a) "Fish" means fresh or saltwater finfish, crustaceans and other forms of aquatic life (including alligator, frog, aquatic turtle, jellyfish, sea , and sea urchin and the roe of such animals) other than birds or mammals, and all mollusks, if such animal life is intended for human consumption.

(b) "Fish" includes an edible human FOOD product derived in whole or in part from FISH, including FISH that have been processed in any manner.

(27) "Food" means a raw, cooked, or processed edible substance, ice, BEVERAGE, or ingredient used or intended for use or for sale in whole or in part for human consumption, or chewing gum.

(28) "Foodborne disease outbreak" means the occurrence of two or more cases of a similar illness resulting from the ingestion of a common food.

(29) "Food-contact surface" means:

(a) A surface of EQUIPMENT or a UTENSIL with which FOOD normally comes into contact; or

(b) A surface of EQUIPMENT or a UTENSIL from which FOOD may drain, drip, or splash:

(i) Into a FOOD, or

(ii) Onto a surface normally in contact with FOOD.

(30) "Food employee" means an individual working with unPACKAGED FOOD, FOOD

7 EQUIPMENT or UTENSILS, or FOOD-CONTACT SURFACES.

(31) Food Establishment.

(a) "Food establishment" means an operation that stores, prepares, packages, serves, vends, or otherwise provides FOOD for human consumption:

(i) Such as a ; satellite or catered feeding location; catering operation if the operation provides FOOD directly to a CONSUMER or to a conveyance used to transport people; market; vending location; conveyance used to transport people; institution; or FOOD bank; and

(ii) That relinquishes possession of FOOD to a CONSUMER directly, or indirectly through a delivery service such as home delivery of grocery orders or restaurant takeout orders, or delivery service that is provided by common carriers.

(b) "Food establishment" includes:

(i) An element of the operation such as a transportation vehicle or a central preparation facility that supplies a vending location or satellite feeding location unless the vending or feeding location is PERMITTED by the REGULATORY AUTHORITY; and

(ii) An operation that is conducted in a mobile, stationary, temporary, or permanent facility or location; where consumption is on or off the PREMISES; and regardless of whether there is a charge for the FOOD.

(c) "Food establishment" does not include:

(i) An establishment that offers only prePACKAGED FOODS that are not POTENTIALLY HAZARDOUS;

(ii) A produce stand that only offers whole, uncut fresh and vegetables;

(iii) A kitchen in a private home if only FOOD that is not POTENTIALLY HAZARDOUS is prepared for sale or service at a function such as a religious or charitable organization's bake sale if allowed by and if the CONSUMER is informed by a clearly visible placard at the sales or service location that the FOOD is prepared in a kitchen that is not subject to regulation and inspection by the REGULATORY AUTHORITY;

(iv) An area where FOOD that is prepared as specified in Subparagraph (c)(iv) of this definition is sold or offered for human consumption;

(v) A kitchen in a private home, such as a small family day-care provider; or a bed-and- operation that prepares and offers FOOD to guests if the

8 home is owner occupied, the number of available guest bedrooms does not exceed 6, breakfast is the only offered, the number of guests served does not exceed 18, and the CONSUMER is informed by statements contained in published advertisements, mailed brochures, and placards posted at the registration area that the FOOD is prepared in a kitchen that is not regulated and inspected by the REGULATORY AUTHORITY; or

(vi) A private home that receives catered or home-delivered FOOD.

(32) Plant.

(a) "Food processing plant" means a FOOD ESTABLISHMENT that manufactures, packages, labels, or stores FOOD for human consumption and does not provide FOOD directly to a CONSUMER.

(b) "Food processing plant" does not include a FOOD ESTABLISHMENT as defined under Subparagraph 1-201.10(B)(31).

(33) Game Animal.

(a) "Game animal" means an animal, the products of which are FOOD, that is not classified as , , swine, , horse, mule, or other equine in 9 CFR Subchapter A - Mandatory Meat Inspection, Part 301, as Poultry in 9 CFR Subchapter C - Mandatory Poultry Products Inspection, Part 381, or as FISH as defined under Subparagraph 1-201.10(B)(26).

(b) "Game animal" includes mammals such as reindeer, elk, deer, antelope, water buffalo, bison, rabbit, squirrel, opossum, raccoon, nutria, or muskrat, and nonaquatic reptiles such as land snakes.

(c) "Game animal" does not include ratites such as ostrich, emu, and rhea.

(34) "General use pesticide" means a pesticide that is not classified by EPA for restricted use as specified in 40 CFR 152.175.

(35) "Grade A standards" means the requirements of the United States Public Health Service/FDA "Grade A Pasteurized Milk Ordinance" and "Grade A Condensed and Dry Milk Ordinance" with which certain fluid and dry milk and milk products comply.

(36) Group Residence.

(a) "Group residence" means a private or public housing corporation or institutional facility that provides living quarters and .

(b) "Group residence" includes a domicile for unrelated PERSONS such as a retirement home or a long-term health care facility.

9 (37) "HACCP plan" means a written document that delineates the formal procedures for following the HAZARD Analysis CRITICAL CONTROL POINT principles developed by The National Advisory Committee on Microbiological Criteria for Foods.

(38) "Hazard" means a biological, chemical, or physical property that may cause an unacceptable CONSUMER health risk.

(39) "Hermetically sealed container" means a container that is designed and intended to be secure against the entry of and, in the case of low acid canned FOODS, to maintain the commercial sterility of its contents after processing.

(40) "Highly susceptible population" means a group of PERSONS who are more likely than other populations to experience foodborne disease because they are immunocompromised or older adults and in a facility that provides health care or assisted living services, such as a hospital or home; or preschool age children in a facility that provides custodial care, such as a day care center.

(40a) “Incongruous” means inconsistent with the inspection reports of other inspectors or the REGULATORY AUTHORITY as a whole because significantly more or fewer violations of individual CRITICAL ITEMS are documented.

(41) "Imminent health hazard" means a significant threat or danger to health that is considered to exist when there is evidence sufficient to show that a product, practice, circumstance, or event creates a situation that requires immediate correction or cessation of operation to prevent injury based on:

(i) The number of potential injuries, and

(ii) The nature, severity, and duration of the anticipated injury.

(42) "Injected" means manipulating a MEAT so that infectious or toxigenic microorganisms may be introduced from its surface to its interior through tenderizing with deep penetration or injecting the MEAT such as by processes which may be referred to as "injecting," "pinning," or "stitch pumping.”

(43) "", when used in the context of FOOD safety, means the aqueous liquid expressed or extracted from one or more fruits or vegetables, purées of the edible portions of one or more fruits or vegetables, or any concentrate of such liquid or purée. This definition does not apply to standards of identity.

(44) "Kitchenware" means FOOD preparation and storage UTENSILS.

(45) "Law" means applicable local, state, and federal statutes, regulations, and ordinances.

(46) "Linens" means fabric items such as cloth hampers, cloth napkins, table cloths,

10 wiping cloths, and work garments including cloth gloves.

(47) "Meat" means the flesh of animals used as FOOD including the dressed flesh of cattle, swine, sheep, or and other edible animals, except fish, poultry, and wild game animals as specified under Subparagraphs 3-201.17(A)(3) and (4).

(48) "mg/L" means milligrams per liter, which is the metric equivalent of parts per million (ppm).

(49) "Molluscan shellfish" means any edible species of fresh or frozen oysters, clams, mussels, and scallops or edible portions thereof, except when the scallop product consists only of the shucked adductor muscle.

(50) Packaged.

(a) "Packaged" means bottled, canned, cartoned, securely bagged, or securely wrapped.

(b) "Packaged" does not include a wrapper, carry-out box, or other nondurable container used to containerize FOOD with the purpose of facilitating FOOD protection during service and receipt of the FOOD by the CONSUMER.

(51) "License" means the document issued by the REGULATORY AUTHORITY that authorizes a PERSON to operate a FOOD ESTABLISHMENT.

(52) "License holder" means the entity that:

(a) Is legally responsible for the operation of the FOOD ESTABLISHMENT such as the owner, the owner's agent, or other PERSON; and

(b) Possesses a valid LICENSE to operate a FOOD ESTABLISHMENT.

(53) "Person" means an association, a corporation, individual, partnership, other legal entity, government, or governmental subdivision or agency.

(54) "Person in charge" means the individual present at a FOOD ESTABLISHMENT who is responsible for the operation at the time of inspection.

(55) Personal Care Items.

(a) "Personal care items" means items or substances that may be poisonous, toxic, or a source of contamination and are used to maintain or enhance a PERSON'S health, , or appearance.

(b) "Personal care items" include items such as medicines; first aid supplies; and other items such as cosmetics, and toiletries such as toothpaste and mouthwash.

11 (56) "pH" means the symbol for the negative logarithm of the hydrogen ion concentration, which is a measure of the degree of acidity or alkalinity of a solution.

Values between 0 and 7 indicate acidity and values between 7 and 14 indicate alkalinity. The value for pure distilled water is 7, which is considered neutral.

(57) "Physical facilities" means the structure and interior surfaces of a FOOD ESTABLISHMENT including accessories such as soap and towel dispensers and attachments such as light fixtures and heating or air conditioning system vents.

(58) "Plumbing fixture" means a receptacle or device that:

(a) Is permanently or temporarily connected to the water distribution system of the PREMISES and demands a supply of water from the system; or

(b) Discharges used water, waste materials, or SEWAGE directly or indirectly to the drainage system of the PREMISES.

(59) "Plumbing system" means the water supply and distribution pipes; PLUMBING FIXTURES and traps; soil, waste, and vent pipes; sanitary and storm sewers and building drains, including their respective connections, devices, and appurtenances within the PREMISES; and water-treating EQUIPMENT.

(60) "Poisonous or toxic materials" means substances that are not intended for ingestion and are included in 4 categories:

(a) Cleaners and SANITIZERS, which include cleaning and SANITIZING agents and agents such as caustics, acids, drying agents, polishes, and other chemicals;

(b) Pesticides, except SANITIZERS, which include substances such as insecticides and rodenticides;

(c) Substances necessary for the operation and maintenance of the establishment such as nonfood grade lubricants and PERSONAL CARE ITEMS that may be deleterious to health; and

(d) Substances that are not necessary for the operation and maintenance of the establishment and are on the PREMISES for retail sale, such as petroleum products and paints.

(61) Potentially Hazardous Food.

(a) "Potentially hazardous food" means a FOOD that is natural or synthetic and that requires temperature control because it is in a form capable of supporting:

(i) The rapid and progressive growth of infectious or toxigenic microorganisms;

12 (ii) The growth and toxin production of Clostridium botulinum; or

(iii) In raw shell eggs, the growth of Salmonella Enteritidis.

(b) "Potentially hazardous food" includes an animal FOOD (a FOOD of animal origin) that is raw or heat-treated; a FOOD of plant origin that is heat-treated or consists of raw sprouts; cut melons; and garlic-in-oil that are not modified in a way that results in mixtures that do not support growth as specified under Subparagraph (a) of this definition.

(c) "Potentially hazardous food" does not include:

(i) An air-cooled hard-boiled egg with shell intact;

(ii) A FOOD with an aw value of 0.85 or less;

(iii) A FOOD with a pH level of 4.6 or below when measured at 24oC (75oF);

(iv) A FOOD, in an unopened HERMETICALLY SEALED CONTAINER, that is commercially processed to achieve and maintain commercial sterility under conditions of nonrefrigerated storage and distribution;

(v) A FOOD for which laboratory evidence demonstrates that the rapid and progressive growth of infectious or toxigenic microorganisms or the growth of S. Enteritidis in eggs or C. botulinum can not occur, such as a FOOD that has an aw and a pH that are above the levels specified under Subparagraphs (c)(ii) and (iii) of this definition and that may contain a , other barrier to the growth of microorganisms, or a combination of barriers that inhibit the growth of microorganisms; or

(vi) A FOOD that does not support the growth of microorganisms as specified under Subparagraph (a) of this definition even though the FOOD may contain an infectious or toxigenic or chemical or physical contaminant at a level sufficient to cause illness.

(62) Poultry.

(a) "Poultry" means:

(i) Any domesticated bird (chickens, turkeys, ducks, geese, or guineas), whether live or dead, as defined in 9 CFR 381 Poultry Products Inspection Regulations; and

(ii) Any migratory waterfowl, game bird, or squab such as pheasant, partridge, quail, grouse, or guineas, whether live or dead, as defined in 9 CFR 362 Voluntary Poultry Inspection Program.

13 (b) "Poultry" does not include ratites.

(63) "Premises" means:

(a) The physical facility, its contents, and the contiguous land or property under the control of the LICENSE HOLDER; or

(b) The physical facility, its contents, and the land or property not described under Subparagraph (a) of this definition if its facilities and contents are under the control of the LICENSE HOLDER and may impact FOOD ESTABLISHMENT personnel, facilities, or operations, and a FOOD ESTABLISHMENT is only one component of a larger operation such as a health care facility, hotel, motel, school, recreational camp, or prison.

(63a) “Prepare” means to process commercially for human consumption by manufacturing, packaging, labeling, cooking, or assembling.

(64) "Primal cut" means a basic major cut into which carcasses and sides of MEAT are separated, such as a beef round, pork loin, lamb flank, or veal breast.

(64a) “Public health control” means a method to prevent transmission of foodborne illness to the CONSUMER.

(65) "Public water system" has the meaning stated in 40 CFR 141 National Primary Drinking Water Regulations.

(66) Ready-to-Eat Food.

(a) "Ready-to-eat food" means FOOD that is in a form that is edible without washing, cooking, or additional preparation by the FOOD ESTABLISHMENT or the CONSUMER and that is reasonably expected to be consumed in that form.

(b) "Ready-to-eat food" includes:

(i) POTENTIALLY HAZARDOUS FOOD that is unPACKAGED and cooked to the temperature and time required for the specific FOOD under Subpart 3-401;

(ii) Raw, washed, cut fruits and vegetables;

(iii) Whole, raw fruits and vegetables that are presented for consumption without the need for further washing, such as at a ; and

(iv) Other FOOD presented for consumption for which further washing or cooking is not required and from which rinds, peels, husks, or shells are removed.

(67) Reduced Packaging.

14 (a) "Reduced oxygen packaging" means:

(1) The reduction of the amount of oxygen in a PACKAGE by removing oxygen; displacing oxygen and replacing it with another gas or combination of gases; or otherwise controlling the oxygen content to a level below that normally found in the surrounding, 21% oxygen atmosphere, and

(2) A process as specified in Subparagraph (a)(1) of this definition that involves a FOOD for which Clostridium botulinum is identified as a microbiological HAZARD in the final PACKAGED form.

(b) "Reduced oxygen packaging" includes:

(i) Vacuum PACKAGING, in which air is removed from a PACKAGE of FOOD and the PACKAGE is HERMETICALLY SEALED so that a vacuum remains inside the PACKAGE, such as sous vide;

(ii) Modified atmosphere PACKAGING, in which the atmosphere of a PACKAGE of FOOD is modified so that its composition is different from air but the atmosphere may change over time due to the permeability of the PACKAGING material or the respiration of the FOOD. Modified atmosphere PACKAGING includes: reduction in the proportion of oxygen, total replacement of oxygen, or an increase in the proportion of other gases such as or nitrogen; and

(iii) Controlled atmosphere PACKAGING, in which the atmosphere of a PACKAGE of FOOD is modified so that until the PACKAGE is opened, its composition is different from air, and continuous control of that atmosphere is maintained, such as by using oxygen scavengers or a combination of total replacement of oxygen, nonrespiring food, and impermeable packaging material.

(68) "Refuse" means solid waste not carried by water through the SEWAGE system.

(69) "Regulatory authority" means the Department or a local health department or public health services district operating under a delegation of authority from the Department.

(69a) “Remodel” means to change the PHYSICAL FACILITIES or PLUMBING FIXTURES in a FOOD ESTABLISHMENT’S FOOD preparation, storage, or cleaning areas through construction, replacement, or relocation, but does not include the replacement of old EQUIPMENT with new EQUIPMENT of the same type.

(69b) “Requester” means a PERSON who requests an approval from the

15 REGULATORY AUTHORITY, but who is not an applicant or a LICENSE HOLDER.

(70) "Restricted use pesticide" means a pesticide product that contains the active ingredients specified in 40 CFR 152.175 Pesticides classified for restricted use, and that is limited to use by or under the direct supervision of a certified applicator.

(71) "Safe material" means:

(a) An article manufactured from or composed of materials that may not reasonably be expected to result, directly or indirectly, in their becoming a component or otherwise affecting the characteristics of any FOOD;

(b) An additive that is used as specified in § 409 or 706 of the Federal Food, Drug, and Cosmetic Act; or

(c) Other materials that are not ADDITIVES and that are used in conformity with applicable regulations of the Food and Drug Administration.

(72) "Sanitization" means the application of cumulative heat or chemicals on cleaned FOOD-CONTACT SURFACES that, when evaluated for efficacy, is sufficient to yield a reduction of 5 logs, which is equal to a 99.999% reduction, of representative disease microorganisms of public health importance.

(73) "Sealed" means free of cracks or other openings that allow the entry or passage of moisture.

(74) "Service animal" means an animal such as a guide dog, signal dog, or other animal individually trained to provide assistance to an individual with a disability.

(75) "Servicing area" means an operating base location to which a mobile FOOD ESTABLISHMENT or transportation vehicle returns regularly for such things as vehicle and equipment cleaning, discharging liquid or solid wastes, refilling water tanks and ice bins, and boarding FOOD.

(76) "Sewage" means liquid waste containing animal or vegetable matter in suspension or solution and may include containing chemicals in solution.

(77) "Shellfish control authority" means a state, federal, foreign, tribal, or other government entity legally responsible for administering a program that includes certification of MOLLUSCAN SHELLFISH harvesters and dealers for interstate commerce.

(78) "Shellstock" means raw, in-shell MOLLUSCAN SHELLFISH.

(79) "Shucked shellfish" means MOLLUSCAN SHELLFISH that have one or both shells

16 removed.

(80) "Single-service articles" means , carry-out UTENSILS, and other items such as bags, containers, placemats, stirrers, straws, toothpicks, and wrappers that are designed and constructed for one time, one PERSON use after which they are intended for discard.

(81) Single-Use Articles.

(a) "Single-use articles" means UTENSILS and bulk FOOD containers designed and constructed to be used once and discarded.

(b) "Single-use articles" includes items such as wax paper, butcher paper, plastic wrap, formed aluminum FOOD containers, jars, plastic tubs or buckets, bread wrappers, pickle barrels, ketchup bottles, and number 10 cans which do not meet the materials, durability, strength, and cleanability specifications under §§ 4-101.11, 4-201.11, and 4-202.11 for multiuse UTENSILS.

(82) "Slacking" means the process of moderating the temperature of a FOOD such as allowing a FOOD to gradually increase from a temperature of -23oC (-10oF) to -4o C (25oF) in preparation for deep-fat frying or to facilitate even heat penetration during the cooking of previously block-frozen FOOD such as spinach.

(83) "Smooth" means:

(a) A FOOD-CONTACT SURFACE having a surface free of pits and inclusions with a cleanability equal to or exceeding that of (100 grit) number 3 stainless steel;

(b) A nonFOOD-CONTACT SURFACE of EQUIPMENT having a surface equal to that of commercial grade hot-rolled steel free of visible scale; and

(c) A floor, wall, or ceiling having an even or level surface with no roughness or projections that render it difficult to clean.

(84) "Table-mounted equipment" means EQUIPMENT that is not portable and is designed to be mounted off the floor on a table, counter, or shelf.

(85) "Tableware" means , drinking, and serving UTENSILS for table use such as flatware including forks, knives, and spoons; hollowware including bowls, cups, serving dishes, and tumblers; and plates.

(86) "Temperature measuring device" means a thermometer, thermocouple, thermistor, or other device that indicates the temperature of FOOD, air, or water.

(87) "Temporary food establishment" means a FOOD ESTABLISHMENT that operates for a period of no more than 14 consecutive days in conjunction with a single event or

17 celebration.

(88) "USDA" means the U.S. Department of Agriculture.

(89) "Utensil" means a FOOD-contact implement or container used in the storage, preparation, transportation, dispensing, sale, or service of FOOD, such as KITCHENWARE or TABLEWARE that is multiuse, SINGLE-SERVICE, or SINGLE-USE; gloves used in contact with FOOD; FOOD TEMPERATURE MEASURING DEVICES; and probe-type price or identification tags used in contact with FOOD.

(90) "Variance" means a written document issued by the REGULATORY AUTHORITY that authorizes a modification or waiver of one or more requirements of this Code if, in the opinion of the REGULATORY AUTHORITY, a health HAZARD or nuisance will not result from the modification or waiver.

(91) "Vending machine" means a self-service device that, upon insertion of a coin, paper currency, token, card, or key, or by optional manual operation, dispenses unit servings of FOOD in bulk or in packages without the necessity of replenishing the device between each vending operation.

(92) "Vending machine location" means the room, enclosure, space, or area where one or more VENDING MACHINES are installed and operated and includes the storage areas and areas on the PREMISES that are used to service and maintain the VENDING MACHINES.

(93) "Warewashing" means the cleaning and SANITIZING of UTENSILS and FOOD-CONTACT SURFACES of EQUIPMENT.

(94) "Whole-muscle, intact beef" means whole muscle beef that is not injected, mechanically tenderized, reconstructed, or scored and marinated, from which beef steaks may be cut.

Chapter

2 Management and Personnel

Parts

18 2-1 SUPERVISION 2-2 EMPLOYEE HEALTH 2-3 PERSONAL CLEANLINESS 2-4 HYGIENIC PRACTICES

2-1 SUPERVISION

Subparts

2-101 Responsibility 2-102 Knowledge 2-103 Duties

Responsibility 2-101.11 Assignment.*

The LICENSE HOLDER shall be the PERSON IN CHARGE or shall designate a PERSON IN CHARGE and shall ensure that a PERSON IN CHARGE is present at the FOOD ESTABLISHMENT during all hours of operation.

Knowledge 2-102.11 Demonstration.*

Based on the risks of foodborne illness inherent to the FOOD operation, during inspections and upon request the PERSON IN CHARGE shall demonstrate to the REGULATORY AUTHORITY knowledge of foodborne disease prevention, application of the HAZARD Analysis CRITICAL CONTROL POINT principles, and the requirements of this Code. The PERSON IN CHARGE shall demonstrate this knowledge by compliance with this Code, by being a certified FOOD protection manager who has shown proficiency of required information through passing a test that is part of an ACCREDITED PROGRAM, or by responding correctly to the inspector's questions as they relate to the specific FOOD operation. The areas of knowledge include:

(A) Describing the relationship between the prevention of foodborne disease and the personal hygiene of a FOOD EMPLOYEE;

(B) Explaining the responsibility of the PERSON IN CHARGE for preventing the transmission of foodborne disease by a FOOD EMPLOYEE who has a disease or medical condition that may cause foodborne disease;

19 (C) Describing the symptoms associated with the diseases that are transmissible through FOOD;

(D) Explaining the significance of the relationship between maintaining the time and temperature of POTENTIALLY HAZARDOUS FOOD and the prevention of foodborne illness;

(E) Explaining the HAZARDS involved in the consumption of raw or undercooked MEAT, POULTRY, eggs, and FISH.

(F) Stating the required FOOD temperatures and times for safe cooking of POTENTIALLY HAZARDOUS FOOD including MEAT, POULTRY, eggs, and FISH.

(G) Stating the required temperatures and times for the safe refrigerated storage, hot holding, cooling, and reheating of POTENTIALLY HAZARDOUS FOOD;

(H) Describing the relationship between the prevention of foodborne illness and the management and control of the following:

(1) Cross contamination,

(2) Hand contact with READY-TO-EAT FOODS,

(3) Handwashing, and

(4) Maintaining the FOOD ESTABLISHMENT in a clean condition and in good repair;

(I) Explaining the relationship between FOOD safety and providing EQUIPMENT that is:

(1) Sufficient in number and capacity, and

(2) Properly designed, constructed, located, installed, operated, maintained, and cleaned;

(J) Explaining correct procedures for cleaning and SANITIZING UTENSILS and FOOD-CONTACT SURFACES of EQUIPMENT;

(K) Identifying the source of water used and measures taken to ensure that it remains protected from contamination such as providing protection from backflow and precluding the creation of cross connections;

20 (L) Identifying POISONOUS OR TOXIC MATERIALS in the FOOD ESTABLISHMENT and the procedures necessary to ensure that they are safely stored, dispensed, used, and disposed of according to LAW;

(M) Identifying CRITICAL CONTROL POINTS in the operation from purchasing through sale or service that when not controlled may contribute to the transmission of foodborne illness and explaining steps taken to ensure that the points are controlled in accordance with the requirements of this Code;

(N) Explaining the details of how the PERSON IN CHARGE and FOOD EMPLOYEES comply with the HACCP PLAN if a plan is required by the LAW, this Code, or an agreement between the REGULATORY AUTHORITY and the establishment; and

(O) Explaining the responsibilities, rights, and authorities assigned by this Code to the:

(1) FOOD EMPLOYEE,

(2) PERSON IN CHARGE, and

(3) REGULATORY AUTHORITY.

Duties 2-103.11 Person in Charge.

The PERSON IN CHARGE shall ensure that:

(A) FOOD ESTABLISHMENT operations are not conducted in a private home or in a room used as living or sleeping quarters as specified under § 6-202.111;

(B) PERSONS unnecessary to the FOOD ESTABLISHMENT operation are not allowed in the FOOD preparation, FOOD storage, or WAREWASHING areas, except that brief visits and tours may be authorized by the PERSON IN CHARGE if steps are taken to ensure that exposed FOOD; clean EQUIPMENT, UTENSILS, and LINENS; and unwrapped SINGLE-SERVICE and SINGLE-USE ARTICLES are protected from contamination;

(C) EMPLOYEES and other PERSONS such as delivery and maintenance PERSONS and pesticide applicators entering the FOOD preparation, FOOD storage, and WAREWASHING areas comply with this Code;

21 (D) EMPLOYEES are effectively cleaning their hands, by routinely monitoring the EMPLOYEES' handwashing;

(E) EMPLOYEES are visibly observing FOODS as they are received to determine that they are from APPROVED sources, delivered at the required temperatures, protected from contamination, unADULTERATED, and accurately presented, by routinely monitoring the EMPLOYEES' observations and periodically evaluating FOODS upon their receipt;

(F) EMPLOYEES are properly cooking POTENTIALLY HAZARDOUS FOOD, being particularly careful in cooking those FOODS known to cause severe foodborne illness and death, such as eggs and COMMINUTED MEATS, through daily oversight of the EMPLOYEES' routine monitoring of the cooking temperatures using appropriate temperature measuring devices properly scaled and calibrated as specified under § 4-203.11 and ¶ 4-502.11(B);

(G) EMPLOYEES are using proper methods to rapidly cool POTENTIALLY HAZARDOUS FOODS that are not held hot or are not for consumption within 4 hours, through daily oversight of the EMPLOYEES' routine monitoring of FOOD temperatures during cooling;

(H) CONSUMERS who order raw or partially cooked READY-TO-EAT FOODS of animal origin are informed as specified under § 3-603.11 that the FOOD is not cooked sufficiently to ensure its safety;

(I) EMPLOYEES are properly SANITIZING cleaned multiuse EQUIPMENT and UTENSILS before they are reused, through routine monitoring of solution temperature and exposure time for hot water SANITIZING, and chemical concentration, pH, temperature, and exposure time for chemical SANITIZING;

(J) CONSUMERS are notified that clean TABLEWARE is to be used when they return to self-service areas such as salad bars and as specified under § 3-304.16;

(K) EMPLOYEES are preventing cross-contamination of READY-TO- EAT FOOD with bare hands by properly using suitable UTENSILS such as deli tissue, spatulas, tongs, single-use gloves, or dispensing EQUIPMENT; and

(L) EMPLOYEES are properly trained in FOOD safety as it relates to their assigned duties.

22 2-2 EMPLOYEE HEALTH

Subpart

2-201 Disease or Medical Condition

Disease or 2-201.11 Responsibility of the Person in Charge to Require Medical Reporting by Food Employees and Applicants.* Condition employer requires The LICENSE HOLDER shall require FOOD EMPLOYEE applicants to whom employee a conditional offer of employment is made and FOOD EMPLOYEES to reporting of: report to the PERSON IN CHARGE, information about their health and activities as they relate to diseases that are transmissible through FOOD. A FOOD EMPLOYEE or applicant shall report the information in a manner that allows the PERSON IN CHARGE to prevent the likelihood of foodborne disease transmission, including the date of onset of jaundice or of an illness specified under ¶ (C) of this section, if the health status FOOD EMPLOYEE or applicant: employee is ill (A) Is diagnosed with an illness due to:

(1) Salmonella Typhi,

(2) Shigella spp.,

(3) Escherichia coli O157:H7, or

(4) Hepatitis A virus; employee has (B) Has a symptom caused by illness, infection, or other source symptom of: that is:

• intestinal illness (1) Associated with an acute gastrointestinal illness such as:

(a) ,

(b) Fever,

(c) Vomiting,

(d) Jaundice, or

23 (e) Sore throat with fever, or

• Boil or infected (2) A lesion containing pus such as a boil or infected wound that wound is open or draining and is:

(a) On the hands or wrists, unless an impermeable cover such as a finger cot or stall protects the lesion and a SINGLE-USE glove is worn over the impermeable cover,

(b) On exposed portions of the arms, unless the lesion is protected by an impermeable cover, or

(c) On other parts of the body, unless the lesion is covered by a dry, durable, tight-fitting bandage; employee (C) Had a past illness from an infectious agent specified under previously ill ¶ (A) of this section; or activities (D) Meets one or more of the following high-risk conditions: employee at high (1) Is suspected of causing, or being exposed to, a CONFIRMED risk of becoming DISEASE OUTBREAK caused by S. Typhi, Shigella spp., E. coli ill: O157:H7, or hepatitis A virus including an outbreak at an event • prepared or such as a family meal, church , or festival because the consumed food FOOD EMPLOYEE or applicant: that caused disease (a) Prepared FOOD implicated in the outbreak,

(b) Consumed FOOD implicated in the outbreak, or

(c) Consumed FOOD at the event prepared by a PERSON who is infected or ill with the infectious agent that caused the outbreak or who is suspected of being a shedder of the infectious agent,

• lives wi th ill (2) Lives in the same household as a PERSON who is diagnosed person with a disease caused by S. Typhi, Shigella spp., E. coli O157:H7, or hepatitis A virus, or

• lives with person (3) Lives in the same household as a PERSON who attends or involved in works in a setting where there is a confirmed disease outbreak disease outbreak caused by S. Typhi, Shigella spp., E. coli O157:H7, or hepatitis A virus.

24 2-3 PERSONAL CLEANLINESS

Subparts

2-301 Hands and Arms 2-302 Fingernails 2-303 Jewelry 2-304 Outer Clothing

Hands and Arms 2-301.11 Clean Condition.*

FOOD EMPLOYEES shall keep their hands and exposed portions of their arms clean.

2-301.12 Cleaning Procedure.*

(A) Except as specified in ¶ (B) of this section, FOOD EMPLOYEES shall clean their hands and exposed portions of their arms with a cleaning compound in a lavatory that is equipped as specified under ¶ 5-202.12 by vigorously rubbing together the surfaces of their lathered hands and arms for at least 20 seconds and thoroughly rinsing with clean water. EMPLOYEES shall pay particular attention to the areas underneath the fingernails and between the fingers.

(B) If APPROVED and capable of removing the types of soils encountered in the FOOD operations involved, an automatic handwashing facility may be used by food employees to clean their hands.

2-301.13 Special Handwash Procedures.*

Reserved.

2-301.14 When to Wash.*

FOOD EMPLOYEES shall clean their hands and exposed portions of their arms as specified under § 2-301.12 immediately before engaging in FOOD preparation including working with exposed FOOD,

25 clean EQUIPMENT and UTENSILS, and unwrapped SINGLE-SERVICE and SINGLE-USE ARTICLES and:

(A) After touching bare human body parts other than clean hands and clean, exposed portions of arms;

(B) After using the toilet room;

(C) After caring for or handling SERVICE ANIMALS or aquatic animals as specified in ¶ 2-403.11(B);

(D) Except as specified in ¶ 2-401.11(B), after coughing, sneezing, using a handkerchief or disposable tissue, using tobacco, eating, or drinking;

(E) After handling soiled EQUIPMENT or UTENSILS;

(F) During FOOD preparation, as often as necessary to remove soil and contamination and to prevent cross contamination when changing tasks;

(G) When switching between working with raw FOOD and working with READY-TO-EAT FOOD; and

(H) After engaging in other activities that contaminate the hands.

2-301.15 Where to Wash.

FOOD EMPLOYEES shall clean their hands in a handwashing lavatory or APPROVED automatic handwashing facility and may not clean their hands in a sink used for FOOD preparation, or in a service sink or a curbed cleaning facility used for the disposal of mop water and similar liquid waste.

2-301.16 Hand Sanitizers.

(A) A hand sanitizer and a chemical hand sanitizing solution used as a hand dip shall:

(1) Comply with one of the following:

(a) Be an APPROVED drug that is listed in the FDA publication Approved Drug Products with Therapeutic Equivalence

26 Evaluations as an APPROVED drug based on safety and effectiveness; or

(b) Have active antimicrobial ingredients that are listed in:

(i) The FDA monograph for OTC Health-Care Antiseptic Drug Products as an antiseptic handwash, or

(ii) The USDA List of Proprietary Substances and Nonfood Compounds, Miscellaneous Publication No. 1419; and

(2) Comply with one of the following:

(a) Have components that are exempted from the requirement of being listed in federal FOOD ADDITIVE regulations as specified in 21 CFR 170.39 - Threshold of regulation for substances used in food-contact articles; or

(b) Comply with and be listed in:

(i) 21 CFR 178 - Indirect Food Additives: Adjuvants, Production Aids, and Sanitizers as regulated for use as a FOOD ADDITIVE with conditions of safe use, or

(ii) 21 CFR 182 - Substances Generally Recognized as Safe, 21 CFR 184 - Direct Food Substances Affirmed as Generally Recognized as Safe, or 21 CFR 186 - Indirect Food Substances Affirmed as Generally Recognized as Safe for use in contact with FOOD; and

(3) Be applied only to hands that are cleaned as specified under § 2-301.12.

(B) If a hand sanitizer or a chemical hand sanitizing solution used as a hand dip does not meet the criteria specified under Subparagraph (A)(2) of this section, use shall be:

(1) Followed by thorough hand rinsing in clean water before hand contact with FOOD or by the use of gloves; or

(2) Limited to situations that involve no direct contact with FOOD by the bare hands.

27 (C) A chemical hand sanitizing solution used as a hand dip shall be maintained clean and at a strength equivalent to at least 100 mg/L chlorine.

Fingernails 2-302.11 Maintenance.

(A) FOOD EMPLOYEES shall keep their fingernails trimmed, filed, and maintained so the edges and surfaces are cleanable and not rough.

(B) Unless wearing intact gloves in good repair, a FOOD EMPLOYEE may not wear fingernail polish or artificial fingernails when working with exposed FOOD.

Jewelry 2-303.11 Prohibition.

While preparing FOOD, FOOD EMPLOYEES may not wear jewelry on their arms and hands. This section does not apply to a plain ring such as a wedding band.

Outer Clothing 2-304.11 Clean Condition.

FOOD EMPLOYEES shall wear clean outer clothing to prevent contamination of FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLE- SERVICE and SINGLE-USE ARTICLES.

28 2-4 HYGIENIC PRACTICES

Subparts

2-401 Food Contamination Prevention 2-402 Hair Restraints 2-403 Animals

Food 2-401.11 Eating, Drinking, or Using Tobacco.* Contamination Prevention (A) Except as specified in ¶ (B) of this section, an EMPLOYEE shall eat, drink, or use any form of tobacco only in designated areas where the contamination of exposed FOOD; clean EQUIPMENT, UTENSILS, and LINENS; unwrapped SINGLE-SERVICE and SINGLE-USE ARTICLES; or other items needing protection can not result.

(B) A FOOD EMPLOYEE may drink from a closed BEVERAGE container if the container is handled to prevent contamination of:

(1) The EMPLOYEE'S hands;

(2) The container; and

(3) Exposed FOOD; clean EQUIPMENT, UTENSILS, and LINENS; and unwrapped SINGLE-SERVICE and SINGLE-USE ARTICLES.

2-401.12 Discharges from the Eyes, Nose, and Mouth.*

FOOD EMPLOYEES experiencing persistent sneezing, coughing, or a runny nose that causes discharges from the eyes, nose, or mouth may not work with exposed FOOD; clean EQUIPMENT, UTENSILS, and LINENS; or unwrapped SINGLE-SERVICE or SINGLE-USE ARTICLES.

Hair Restraints 2-402.11 Effectiveness.

(A) Except as provided in ¶ (B) of this section, FOOD EMPLOYEES shall wear hair restraints such as hats, hair coverings or nets, beard restraints, and clothing that covers body hair, that are designed and worn to effectively keep their hair from contacting exposed FOOD; clean EQUIPMENT, UTENSILS, and LINENS; and unwrapped SINGLE-SERVICE and SINGLE-USE ARTICLES.

(B) This section does not apply to FOOD EMPLOYEES such as counter

29 staff who only serve BEVERAGES and wrapped or PACKAGED FOODS, hostesses, and wait staff if they present a minimal risk of contaminating exposed FOOD; clean EQUIPMENT, UTENSILS, and LINENS; and unwrapped SINGLE-SERVICE and SINGLE-USE ARTICLES.

Animals 2-403.11 Handling Prohibition.*

(A) Except as specified in ¶ (B) of this section, FOOD EMPLOYEES may not care for or handle animals that may be present such as patrol dogs, SERVICE ANIMALS, or pets that are allowed as specified in Subparagraphs 6-501.115(B)(2)-(5).

(B) FOOD EMPLOYEES with SERVICE ANIMALS may handle or care for their SERVICE ANIMALS and FOOD EMPLOYEES may handle or care for FISH in aquariums or MOLLUSCAN SHELLFISH or crustacea in display tanks if they wash their hands as specified under § 2-301.12 and ¶ 2-301.14(C).

30 Chapter

3 Food

Parts

3-1 CHARACTERISTICS 3-2 SOURCES, SPECIFICATIONS, AND ORIGINAL CONTAINERS AND RECORDS 3-3 PROTECTION FROM CONTAMINATION AFTER RECEIVING 3-4 DESTRUCTION OF ORGANISMS OF PUBLIC HEALTH CONCERN 3-5 LIMITATION OF GROWTH OF ORGANISMS OF PUBLIC HEALTH CONCERN 3-6 FOOD IDENTITY, PRESENTATION, AND ON-PREMISES LABELING 3-7 CONTAMINATED FOOD 3-8 SPECIAL REQUIREMENTS FOR HIGHLY SUSCEPTIBLE POPULATIONS

3-1 CHARACTERISTICS

Subparts

3-101 Condition

Condition 3-101.11 Safe, Unadulterated, and Honestly Presented.*

FOOD shall be safe, unADULTERATED, and, as specified under § 3-601.12, honestly presented.

35 3-2 SOURCES, SPECIFICATIONS, AND ORIGINAL CONTAINERS AND RECORDS

Subparts

3-201 Sources 3-202 Specifications for Receiving 3-203 Original Containers and Records

Sources 3-201.11 Compliance with Food Law.*

(A) FOOD shall be obtained from sources that comply with LAW.

(B) FOOD prepared in a private home may not be used or offered for human consumption in a FOOD ESTABLISHMENT .

(C) PACKAGED FOOD shall be labeled as specified in LAW, including 21 CFR 101 FOOD Labeling, 9 CFR 317 Labeling, Marking Devices, and Containers, and 9 CFR 381 Subpart N Labeling and Containers, and as specified under §§ 3-202.17 and 3-202.18.

(D) Fish, other than MOLLUSCAN SHELLFISH, that are intended for consumption in their raw form and allowed as specified in Subparagraph 3-401.11(C)(1) may be offered for sale or service if they are obtained from a supplier that freezes the FISH as specified under § 3-402.11; or frozen on the PREMISES as specified under § 3-402.11 and records are retained as specified under § 3-402.12.

(E) WHOLE-MUSCLE, INTACT BEEF steaks that are intended for consumption in an undercooked form without a CONSUMER advisory as specified in ¶ 3-401.11(C) shall be:

(1) Obtained from a FOOD PROCESSING PLANT that packages the steaks and labels them to indicate that they meet the definition of WHOLE-MUSCLE, INTACT BEEF; or

(2) If individually cut in a FOOD ESTABLISHMENT :

(a) Cut from WHOLE-MUSCLE INTACT BEEF that is labeled by a FOOD PROCESSING PLANT to indicate that the beef meets the definition of WHOLE-MUSCLE, INTACT BEEF,

36 (b) Prepared so they remain intact, and

(c) If PACKAGED for undercooking in a FOOD ESTABLISHMENT , labeled to indicate that they meet the definition of WHOLE-MUSCLE, INTACT BEEF.

(F) MEAT and POULTRY that is not a READY-TO-EAT FOOD and is in a PACKAGED form when it is offered for sale or otherwise offered for consumption, shall be labeled to include safe handling instructions as specified in LAW, including 9 CFR 317.2(l) and 9 CFR 381.125(b).

3-201.12 Food in a Hermetically Sealed Container.*

FOOD in a HERMETICALLY SEALED CONTAINER shall be obtained from a FOOD PROCESSING PLANT that is regulated by the FOOD regulatory agency that has jurisdiction over the plant.

3-201.14 Fish.*

(A) FISH that are received for sale or service shall be:

(1) Commercially and legally caught or harvested; or

(2) APPROVED for sale or service.

(B) MOLLUSCAN SHELLFISH that are recreationally caught may not be received for sale or service.

3-201.15 Molluscan Shellfish.*

(A) MOLLUSCAN SHELLFISH shall be obtained from sources according to LAW and the requirements specified in the U.S. Department of Health and Human Services, Public Health Service, Food and Drug Administration, National Shellfish Sanitation Program Guide for the Control of Molluscan Shellfish.

(B) MOLLUSCAN SHELLFISH received in interstate commerce shall be from sources that are listed in the Interstate Certified Shellfish Shippers List.

3-201.16 Wild Mushrooms.*

37 (A) Except as specified in ¶ (B) of this section, mushroom species picked in the wild shall be obtained from sources where each mushroom is individually inspected and found to be safe by an APPROVED mushroom identification expert.

(B) This section does not apply to:

(1) Cultivated wild mushroom species that are grown, harvested, and processed in an operation that is regulated by the FOOD regulatory agency that has jurisdiction over the operation; or

(2) Wild mushroom species if they are in PACKAGED form and are the product of a FOOD PROCESSING PLANT that is regulated by the FOOD regulatory agency that has jurisdiction over the plant.

3-201.17 Game Animals.*

(A) If GAME ANIMALS are received for sale or service they shall be:

(1) Commercially raised for food and:

(a) Raised slaughtered, and processed under a voluntary inspection program that is conducted by the agency that has animal health jurisdiction, or

(b) Under a routine inspection program conducted by a regulatory agency other than the agency that has animal health jurisdiction, and

(c) Raised, slaughtered, and processed according to:

(i) governing MEAT and POULTRY as determined by the agency that has animal health jurisdiction and the agency that conducts the inspection program, and

(ii) Requirements which are developed by the agency that has animal health jurisdiction and the agency that conducts the inspection program with consideration of factors such as the need for antemortem and postmortem examination by an APPROVED veterinarian or veterinarian’s designee;

38 (2) Under a voluntary inspection program administered by the USDA for game animals such as exotic animals (reindeer, elk, deer, antelope, water buffalo, or bison) that are "inspected and APPROVED" in accordance with 9 CFR 352 Voluntary Exotic Animal Program or rabbits that are "inspected and certified" in accordance with 9 CFR 354 Rabbit Inspection Program;

(3) As allowed by LAW, for wild GAME ANIMALS that are live- caught:

(a) Under a routine inspection program conducted by a regulatory agency such as the agency that has animal health jurisdiction, and

(b) Slaughtered and processed according to:

(i) LAWS governing MEAT and POULTRY as determined by the agency that has animal health jurisdiction and the agency that conducts the inspection program, and

(ii) Requirements which are developed by the agency that has animal health jurisdiction and the agency that conducts the inspection program with consideration of factors such as the need for antemortem and postmortem examination by an APPROVED veterinarian or veterinarian’s designee; or

(4) As ALLOWED by LAW, for field-dressed wild GAME ANIMALS under a routine inspection program that ensures the animals:

(a) Receive a postmortem examination by an APPROVED veterinarian or veterinarian's designee, or

(b) Are field-dressed and transported according to requirements specified by the agency that has animal health jurisdiction and the agency that conducts the inspection program, and

(c) Are processed according to LAWS governing MEAT and POULTRY as determined by the agency that has animal health jurisdiction and the agency that conducts the inspection program.

39 (B) A GAME ANIMAL may not be received for sale or service if it is a species of wildlife that is listed in 50 CFR 17 Endangered and Threatened Wildlife and Plants.

Specifications 3-202.11 Temperature.* for Receiving (A) Except as specified in ¶ (B) of this section, refrigerated, POTENTIALLY HAZARDOUS FOOD shall be at a temperature of 5oC (41oF) or below when received.

(B) If a temperature other than 5oC (41oF) for a POTENTIALLY HAZARDOUS FOOD is specified in LAW governing its distribution, such as LAWS governing milk, MOLLUSCAN SHELLFISH, and shell eggs, the FOOD may be received at the specified temperature.

(C) POTENTIALLY HAZARDOUS FOOD that is cooked to a temperature and for a time specified under §§ 3-401.11 - 3-401.13 and received hot shall be at a temperature of 54oC (130oF) or above.

(D) A FOOD that is labeled frozen and shipped frozen by a FOOD PROCESSING PLANT shall be received frozen.

(E) Upon receipt, POTENTIALLY HAZARDOUS FOOD shall be free of evidence of previous temperature abuse.

3-202.12 Additives.*

FOOD may not contain unAPPROVED FOOD ADDITIVES or ADDITIVES that exceed amounts specified in 21 CFR 170-180 relating to FOOD ADDITIVES, generally recognized as safe or prior sanctioned substances that exceed amounts specified in 21 CFR 181-186, substances that exceed amounts specified in 9 CFR 318.7 Approval of substances for use in the preparation of products, or pesticide residues that exceed provisions specified in 40 CFR 185 Tolerances for Pesticides in Food.

3-202.13 Shell Eggs.*

Shell eggs shall be received clean and sound and may not exceed the restricted egg tolerances for U.S. CONSUMER Grade B as specified in 7 CFR Part 56 - Regulations Governing the Grading of Shell Eggs and U.S. Standards, Grades, and Weight classes for

40 Shell Eggs, and 7 CFR Part 59 - Regulations Governing the Inspection of Eggs and Egg Products.

3-202.14 Eggs and Milk Products, Pasteurized.*

(A) Liquid, frozen, and dry eggs and egg products shall be obtained pasteurized.

3-202.15 Package Integrity.*

FOOD packages shall be in good condition and protect the integrity of the contents so that the FOOD is not exposed to ADULTERATION or potential contaminants.

3-202.16 Ice.*

Ice for use as a FOOD or a cooling medium shall be made from DRINKING WATER.

3-202.17 Shucked Shellfish, Packaging and Identification.

(A) Raw SHUCKED SHELLFISH shall be obtained in nonreturnable packages which bear a legible label that identifies the:

(1) Name, address, and CERTIFICATION NUMBER of the shucker- packer or repacker of the MOLLUSCAN SHELLFISH; and

(2) The "sell by" date for packages with a capacity of less than 1.87 L (one-half gallon) or the date shucked for packages with a capacity of 1.87 L (one-half gallon) or more.

3-202.18 Shellstock Identification.*

(A) SHELLSTOCK shall be obtained in containers bearing legible source identification tags or labels that are affixed by the harvester and each dealer that depurates, ships, or reships the SHELLSTOCK, as specified in the National Shellfish Sanitation Program Guide for the Control of Molluscan Shellfish, and that list:

(1) Except as specified under ¶ (C) of this section, on the harvester's tag or label, the following information in the following order:

(a) The harvester's identification number that is assigned by the SHELLFISH CONTROL AUTHORITY,

41 (b) The date of harvesting,

(c) The most precise identification of the harvest location or aquaculture site that is practicable based on the system of harvest area designations that is in use by the SHELLFISH CONTROL AUTHORITY and including the abbreviation of the name of the state or country in which the shellfish are harvested,

(d) The type and quantity of shellfish, and

(e) The following statement in bold, capitalized type: "This tag is required to be attached until container is empty or retagged and thereafter kept on file for 90 days;" and

(2) Except as specified in ¶ (D) of this section, on each dealer's tag or label, the following information in the following order:

(a) The dealer's name and address, and the CERTIFICATION NUMBER assigned by the SHELLFISH CONTROL AUTHORITY,

(b) The original shipper's CERTIFICATION NUMBER including the abbreviation of the name of the state or country in which the shellfish are harvested,

(c) The same information as specified for a harvester's tag under Subparagraphs (A)(1)(b)-(d) of this section, and

(d) The following statement in bold, capitalized type: "This tag is required to be attached until container is empty and thereafter kept on file for 90 days.”

(B) If a place is provided on the harvester's tag or label for a dealer's name, address, and CERTIFICATION NUMBER, the dealer's information shall be listed first.

(C) If the harvester's tag or label is designed to accommodate each dealer's identification as specified under Subparagraphs (A)(2)(a) and (b) of this section, individual dealer tags or labels need not be provided.

42 3-202.19 Shellstock, Condition.

When received by a FOOD ESTABLISHMENT , SHELLSTOCK shall be reasonably free of mud, dead shellfish, and shellfish with broken shells. Dead shellfish or SHELLSTOCK with badly broken shells shall be discarded.

Original 3-203.11 Molluscan Shellfish, Original Container. Containers and Records (A) Except as specified in ¶¶ (B) and (C) of this section, MOLLUSCAN SHELLFISH may not be removed from the container in which they are received other than immediately before sale, preparation for service, or preparation in a FOOD PROCESSING PLANT licensed by the REGULATORY AUTHORITY.

(B) SHELLSTOCK may be removed from the container in which they are received, displayed on drained ice, or held in a display container, and a quantity specified by a CONSUMER may be removed from the display or display container and provided to the CONSUMER if:

(1) The source of the SHELLSTOCK on display is identified as specified under § 3-202.18 and recorded as specified under § 3-203.12; and

(2) The SHELLSTOCK are protected from contamination.

(C) SHUCKED SHELLFISH may be removed from the container in which they were received and held in a display container from which individual servings are dispensed upon a CONSUMER'S request if:

(1) The labeling information for the shellfish on display as specified under § 3-202.17 is retained and correlated to the date when, or dates during which, the shellfish are sold or served; and

(2) The shellfish are protected from contamination.

3-203.12 Shellstock, Maintaining Identification.*

(A) Except as specified under Subparagraph (B)(2) of this section, SHELLSTOCK tags shall remain attached to the container in which the shellstock are received until the container is empty.

(B) The identity of the source of SHELLSTOCK that are prepared by

43 a FOOD PROCESSING PLANT licensed by the REGULATORY AUTHORITY, sold or served shall be maintained by retaining SHELLSTOCK tags or labels for 90 calendar days from the date the container is emptied by:

(1) Using an APPROVED record keeping system that keeps the tags or labels in chronological order correlated to the date when, or dates during which, the SHELLSTOCK are prepared by a FOOD PROCESSING PLANT licensed by the REGULATORY AUTHORITY, sold, or served; and

(2) If SHELLSTOCK are removed from their tagged or labeled container:

(a) Using only 1 tagged or labeled container at a time, or

(b) Using more than 1 tagged or labeled container at a time and obtaining a VARIANCE from the REGULATORY AUTHORITY as specified in § 8-103.10 based on a HACCP PLAN that:

(i) Is submitted by the LICENSE HOLDER and APPROVED as specified under § 8-103.11,

(ii) Preserves source identification by using a record keeping system as specified under Subparagraph (B)(1) of this Section, and

(iii) Ensures that SHELLSTOCK from one tagged or labeled container are not commingled with SHELLSTOCK from another container before being ordered by the CONSUMER or prepared by a FOOD PROCESSING PLANT licensed by the REGULATORY AUTHORITY.

Clarification of ¶ 3-301.11(B) of the Food Code with respect to the phrase "Except...when otherwise APPROVED"...

The following information is not part of Chapter 3 and is not intended to be included in the codified portion of the Food Code. In cases where the Food Code is adopted through incorporation by reference, this page may be removed.

In response to a 1996 Conference for Food Protection (CFP) Recommendation that ¶ 3-301.11(B) be modified to include the phrase “or when otherwise APPROVED,” the 1997 Code was amended accordingly. A 1998 CFP Recommendation further suggested clarification of that added language.

This insert page is provided to alert the reader that FDA has issued, with this Code, clarification of that phrase and its application. Included in Annex 3 is a full discussion of both the Public Health Reasons associated with § 3-301.11 and Administrative Guidelines regarding the criteria under which bare hand contact with ready-to-eat food may be deemed acceptable in meeting the intent of § 3-301.11.

A HACCP-based approach is applied in the clarification in order to establish a system to control the principal hazard (i.e., fecal-oral transmission of foodborne ) that is the target of the Code provision.

A second 1998 CFP Recommendation was made to consult the National Advisory Committee for the Microbiological Criteria for Foods (NACMCF) for its scientific recommendations surrounding the transmission of pathogens from food workers to consumers via ready-to-eat foods. FDA is preparing information with the intent that the NACMCF will review the matter and make recommendations that will be presented at the 2000 CFP meeting. 3-3 PROTECTION FROM CONTAMINATION AFTER RECEIVING

Subparts

3-301 Preventing Contamination by Employees 3-302 Preventing Food and Ingredient Contamination 3-303 Preventing Contamination from Ice Used as a Coolant 3-304 Preventing Contamination from Equipment, Utensils, and Linens 3-305 Preventing Contamination from the Premises 3-306 Preventing Contamination by Consumers 3-307 Preventing Contamination from Other Sources

Preventing 3-301.11 Preventing Contamination from Hands.* Contamination by Employees (A) FOOD EMPLOYEES shall wash their hands as specified under § 2-301.12.

(B) Except when washing fruits and vegetables as specified under § 3-302.15 or when otherwise APPROVED, FOOD EMPLOYEES may not contact exposed, READY-TO-EAT FOOD with their bare hands and shall use suitable UTENSILS such as deli tissue, spatulas, tongs, non-latex SINGLE-USE gloves, or dispensing EQUIPMENT .

(C) FOOD EMPLOYEES shall minimize bare hand and arm contact with exposed FOOD that is not in a READY-TO-EAT form.S

3-301.12 Preventing Contamination when Tasting.*

A FOOD EMPLOYEE may not use a UTENSIL more than once to taste FOOD that is to be sold or served.

Preventing Food 3-302.11 Packaged and Unpackaged Food - Separation, and Ingredient Packaging, and Segregation.* Contamination (A) FOOD shall be protected from cross contamination by:

(1) Separating raw animal FOODS during storage, preparation, holding, and display from:

(a) Raw READY-TO-EAT FOOD including other raw animal FOOD such as FISH for sushi or MOLLUSCAN SHELLFISH, or

45 other raw READY-TO-EAT FOOD such as vegetables, and

(b) Cooked READY-TO-EAT FOOD;

(2) Except when combined as ingredients, separating types of raw animal FOODS from each other such as beef, FISH, lamb, pork, and POULTRY during storage, preparation, holding, and display by:

(a) Using separate EQUIPMENT for each type, or

(b) Arranging each type of FOOD in EQUIPMENT so that cross contamination of one type with another is prevented, and

(c) Preparing each type of FOOD at different times or in separate areas;

(3) Cleaning EQUIPMENT and UTENSILS as specified under ¶ 4-602.11(A) and SANITIZING as specified under § 4-703.11;

(4) Except as specified in ¶ (B) of this section, storing the FOOD in packages, covered containers, or wrappings;

(5) Cleaning HERMETICALLY SEALED CONTAINERS of FOOD of visible soil before opening;

(6) Protecting FOOD containers that are received PACKAGED together in a case or overwrap from cuts when the case or overwrap is opened;

(7) Storing damaged, spoiled, or recalled FOOD being held in the FOOD ESTABLISHMENT as specified under § 6-404.11; and

(8) Separating fruits and vegetables, before they are washed as specified under § 3-302.15 from READY-TO-EAT FOOD.

(B) Subparagraph (A)(4) of this section does not apply to:

(1) Whole, uncut, raw fruits and vegetables and nuts in the shell, that require peeling or hulling before consumption;

(2) PRIMAL CUTS, quarters, or sides of raw MEAT or slab bacon that are hung on clean, SANITIZED hooks or placed on clean, SANITIZED racks;

(3) Whole, uncut, processed MEATS such as country hams,

46 and smoked or cured sausages that are placed on clean, SANITIZED racks;

(4) FOOD being cooled as specified under Subparagraph 3-501.15(B)(2); or

(5) SHELLSTOCK.

3-302.12 Food Storage Containers, Identified with Common Name of Food.

Working containers holding FOOD or FOOD ingredients that are removed from their original packages for use in the FOOD ESTABLISHMENT , such as cooking oils, flour, , potato flakes, salt, spices, and shall be identified with the common name of the FOOD except that containers holding FOOD that can be readily and unmistakably recognized such as dry pasta need not be identified.

3-302.13 Pasteurized Eggs, Substitute for Raw Shell Eggs for Certain Recipes.*

Pasteurized eggs or egg products shall be substituted for raw shell eggs in the preparation of FOODS such as Caesar salad, hollandaise or Béarnaise sauce, mayonnaise, , ice , and egg-fortified BEVERAGES that are not:

(A) Cooked as specified under Subparagraphs 3-401.11(A)(1) or (2); or

(B) Included in Subparagraph 3-401.11(D).

3-302.14 Protection from Unapproved Additives.*

(A) FOOD shall be protected from contamination that may result from the addition of, as specified in § 3-202.12:

(1) Unsafe or unAPPROVED FOOD or COLOR ADDITIVES; and

(2) Unsafe or unAPPROVED levels of APPROVED FOOD and COLOR ADDITIVES.

(B) A FOOD EMPLOYEE may not:

47 (1) Apply sulfiting agents to fresh fruits and vegetables intended for raw consumption or to a FOOD considered to be a good source of vitamin B1; or

(2) Serve or sell FOOD specified under Subparagraph (B)(1) of this section that is treated with sulfiting agents before receipt by the FOOD ESTABLISHMENT , except that need not meet this subparagraph.

3-302.15 Washing Fruits and Vegetables.

(A) Raw fruits and vegetables shall be thoroughly washed in water to remove soil and other contaminants before being cut, combined with other ingredients, cooked, served, or offered for human consumption in READY-TO-EAT form except as specified in ¶ (B) of this section and except that whole, raw fruits and vegetables that are intended for washing by the CONSUMER before consumption need not be washed before they are sold.

(B) Fruits and vegetables may be washed by using chemicals as specified under § 7-204.12.

Preventing 3-303.11 Ice Used as Exterior Coolant, Prohibited as Contamination Ingredient. from Ice Used as a Coolant After use as a medium for cooling the exterior surfaces of FOOD such as melons or FISH, PACKAGED FOODS such as canned BEVERAGES, or cooling coils and tubes of EQUIPMENT , ice may not be used as FOOD.

3-303.12 Storage or Display of FOOD in Contact with Water or Ice.

(A) PACKAGED FOOD may not be stored in direct contact with ice or water if the FOOD is subject to the entry of water because of the nature of its packaging, wrapping, or container or its positioning in the ice or water.

(B) Except as specified in ¶¶ (C) and (D) of this section, unPACKAGED FOOD may not be stored in direct contact with undrained ice.

(C) Whole, raw fruits or vegetables; cut, raw vegetables such as

48 or sticks or cut potatoes; and tofu may be immersed in ice or water.

(D) Raw chicken and raw FISH that are received immersed in ice in shipping containers may remain in that condition while in storage awaiting preparation, display, service, or sale.

Preventing 3-304.11 Food Contact with Equipment and Utensils.* Contamination from Equipment, FOOD shall only contact surfaces of EQUIPMENT and UTENSILS that Utensils, and are cleaned as specified under Part 4-6 of this Code and Linens SANITIZED as specified under Part 4-7 of this Code.

3-304.12 In-Use Utensils, Between-Use Storage.

During pauses in FOOD preparation or dispensing, FOOD preparation and dispensing UTENSILS shall be stored:

(A) Except as specified under ¶ (B) of this section, in the FOOD with their handles above the top of the FOOD and the container;

(B) In FOOD that is not POTENTIALLY HAZARDOUS with their handles above the top of the FOOD within containers or EQUIPMENT that can be closed, such as bins of sugar, flour, or cinnamon;

(C) On a clean portion of the FOOD preparation table or cooking EQUIPMENT only if the in-use UTENSIL and the FOOD- CONTACT surface of the FOOD preparation table or cooking EQUIPMENT are cleaned and SANITIZED at a frequency specified under §§ 4-602.11 and 4-702.11;

(D) In running water of sufficient velocity to flush particulates to the drain, if used with moist FOOD such as ice cream or mashed potatoes;

49 (E) In a clean, protected location if the UTENSILS, such as ice scoops, are used only with a FOOD that is not POTENT IALLY HAZARDOUS; or

(F) In a container of water if the water is maintained at a temperature of at least 54o C (130oF) and the container is cleaned at a frequency specified under Subparagraph 4-602.11(D)(7).

3-304.13 Linens and Napkins, Use Limitation.

LINENS and napkins may not be used in contact with FOOD unless they are used to line a container for the service of FOODS and the LINENS and napkins are replaced each time the container is refilled for a new CONSUMER.

3-304.14 Wiping Cloths, Use Limitation.

(A) Cloths that are in use for wiping FOOD spills shall be used for no other purpose.

(B) Cloths used for wiping FOOD spills shall be:

(1) Dry and used for wiping FOOD spills from TABLEWARE and carry-out containers; or

(2) Wet and cleaned as specified under ¶ 4-802.11(D), stored in a chemical sanitizer at a concentration specified in § 4- 501.114, and used for wiping spills from FOOD-CONTACT and nonFOOD-CONTACT SURFACES of EQUIPMENT .

(C) Dry or wet cloths that are used with raw animal FOODS shall be kept separate from cloths used for other purposes, and wet cloths used with raw animal FOODS shall be kept in a separate sanitizing solution.

(D) Wet wiping cloths used with a freshly made sanitizing solution and dry wiping cloths shall be free of FOOD debris and visible soil.

3-304.15 Gloves, Use Limitation.

(A) If used, SINGLE-USE gloves shall be used for only one task such

50 as working with READY-TO-EAT FOOD or with raw animal FOOD, used for no other purpose, and discarded when damaged or soiled, or when interruptions occur in the operation.

(B) Except as specified in ¶ (C) of this section, slash-resistant gloves that are used to protect the hands during operations requiring cutting shall be used in direct contact only with FOOD that is subsequently cooked as specified under Part 3-4 such as frozen FOOD or a PRIMAL CUT of MEAT.

(C) Slash-resistant gloves may be used with READY-TO-EAT FOOD that will not be subsequently cooked if the slash-resistant gloves have a SMOOTH, durable, and nonabsorbent outer surface; or if the slash-resistant gloves are covered with a SMOOTH, durable, nonabsorbent glove, or a SINGLE-USE glove. (D) Cloth gloves may not be used in direct contact with FOOD unless the FOOD is subsequently cooked as required under Part 3-4 such as frozen FOOD or a PRIMAL CUT of MEAT.

(E) Latex gloves may not be used in direct contact with FOOD.

3-304.16 Using Clean Tableware for Second Portions and Refills.

(A) Except for refilling a CONSUMER’S drinking cup or container without contact between the pouring UTENSIL and the lip-contact area of the drinking cup or container, FOOD EMPLOYEES may not use TABLEWARE, including SINGLE-SERVICE ARTICLES, soiled by the CONSUMER, to provide second portions or refills.

(B) Except as specified in ¶ (C) of this section, self-service CONSUMERS may not be allowed to use soiled TABLEWARE, including SINGLE-SERVICE ARTICLES, to obtain additional FOOD from the display and serving EQUIPMENT .

(C) Drinking cups and containers may be reused by self-service CONSUMERS if refilling is a contamination-free process as specified under ¶¶ 4-204.13(A), (B), and (D).

3-304.17 Refilling Returnables.

(A) A take-home FOOD container returned to a FOOD ESTABLISHMENT may not be refilled at a FOOD ESTABLISHMENT with a POTENTIALLY HAZARDOUS FOOD.

51 (B) Except as specified in ¶ (C), a take-home FOOD container refilled with FOOD that is not POTENTIALLY HAZARDOUS shall be cleaned as specified under ¶ 4-603.17(B).

(C) Personal take-out BEVERAGE containers, such as thermally insulated bottles, nonspill cups, and promotional BEVERAGE glasses, may be refilled by EMPLOYEES or the CONSUMER if refilling is a contamination-free process as specified under ¶¶ 4-204.13(A), (B), and (D).

Preventing 3-305.11 Food Storage. Contaminationfr om the Premises (A) Except as specified in ¶¶ (B) and (C) of this section, FOOD shall be protected from contamination by storing the FOOD:

(1) In a clean, dry location;

(2) Where it is not exposed to splash, dust, or other contamination; and

(3) At least 15 cm (6 inches) above the floor.

(B) FOOD in packages and working containers may be stored less than 15 cm (6 inches) above the floor on case lot handling EQUIPMENT as specified under § 4-204.122.

(C) Pressurized BEVERAGE containers, cased FOOD in waterproof containers such as bottles or cans, and milk containers in plastic crates may be stored on a floor that is clean and not exposed to floor moisture.

3-305.12 Food Storage, Prohibited Areas.

FOOD may not be stored:

(A) In locker rooms;

(B) In toilet rooms;

(C) In dressing rooms;

(D) In garbage rooms;

52 (E) In mechanical rooms;

(F) Under sewer lines that are not shielded to intercept potential drips;

(G) Under leaking water lines, including leaking automatic fire sprinkler heads, or under lines on which water has condensed;

(H) Under open stairwells; or

(I) Under other sources of contamination.

3-305.13 Vended Potentially Hazardous Food, Original Container.

POTENTIALLY HAZARDOUS FOOD dispensed through a VENDING MACHINE shall be in the package in which it was placed at the FOOD ESTABLISHMENT or FOOD PROCESSING PLANT at which it was prepared.

3-305.14 Food Preparation.

During preparation, unPACKAGED FOOD shall be protected from environmental sources of contamination.

Preventing 3-306.11 Food Display. Contamination by Consumers Except for nuts in the shell and whole, raw fruits and vegetables that are intended for hulling, peeling, or washing by the CONSUMER before consumption, FOOD on display shall be protected from contamination by the use of packaging; counter, service line, or salad FOOD guards; display cases; or other effective means.

3-306.12 Condiments, Protection.

(A) Condiments shall be protected from contamination by being kept in dispensers that are designed to provide protection, protected FOOD displays provided with the proper UTENSILS, original containers designed for dispensing, or individual packages or portions.

(B) Condiments at a VENDING MACHINE LOCATION shall be in

53 individual packages or provided in dispensers that are filled at an APPROVED location, such as the FOOD ESTABLISHMENT that provides FOOD to the VENDING MACHINE LOCATION, a FOOD PROCESSING PLANT that is regulated by the agency that has jurisdiction over the operation, or a properly equipped facility that is located on the site of the VENDING MACHINE LOCATION.

3-306.13 Consumer Self-Service Operations.*

(A) Raw, unPACKAGED animal FOOD, such as beef, lamb, pork, POULTRY, and FISH may not be offered for CONSUMER self-service. This paragraph does not apply to CONSUMER self-service of READY-TO-EAT FOODS at buffets or salad bars that serve FOODS such as sushi or raw shellfish; ready-to- individual portions for immediate cooking and consumption on the PREMISES such as CONSUMER-cooked MEATS or CONSUMER-selected ingredients for Mongolian ; or raw, frozen, shell-on shrimp or lobster.

(B) CONSUMER self-service operations for READY-TO-EAT FOODS shall be provided with suitable UTENSILS or effective dispensing methods that protect the FOOD from contamination.N

(C) CONSUMER self-service operations such as buffets and salad bars shall be monitored by FOOD EMPLOYEES trained in safe operating procedures.N

3-306.14 Returned Food and Reservice of Food.*

(A) Except as specified in ¶ (B) of this section, after being served or sold and in the possession of a CONSUMER, FOOD that is unused or returned by the CONSUMER may not be offered as FOOD for human consumption.

(B) Except as specified under ¶ 3-801.11(C), a container of FOOD that is not POTENTIALLY HAZARDOUS may be transferred from one CONSUMER to another if:

(1) The FOOD is dispensed so that it is protected from contamination and the container is closed between uses, such as a narrow-neck bottle containing catsup, steak sauce, or ; or

(2) The FOOD, such as crackers, salt, or pepper, is in an

54 unopened original PACKAGE and is maintained in sound condition.

Preventing 3-307.11 Miscellaneous Sources of Contamination. Contamination from Other FOOD shall be protected from contamination that may result from Sources a factor or source not specified under Subparts 3-301 - 3-306.

3-4 DESTRUCTION OF ORGANISMS OF PUBLIC HEALTH CONCERN

Subparts

3-401 Cooking 3-402 Freezing 3-403 Reheating

Cooking 3-401.11 Raw Animal Foods.*

(A) Except as specified under ¶ (B) and in ¶¶ (C) and (D) of this section, raw animal FOODS such as eggs, FISH, MEAT, POULTRY, and FOODS containing these raw animal FOODS, shall be cooked to heat all parts of the FOOD to a temperature and for a time that complies with one of the following methods based on the FOOD that is being cooked:

(1) 63oC (145oF) or above for 15 seconds for:

(a) Raw shell eggs that are broken and prepared in response to a CONSUMER'S order and for immediate service, and

(b) Except as specified under Subparagraphs (A)(2) and (3) and ¶ (B) of this section, FISH, MEAT, and pork including GAME ANIMALS commercially raised for FOOD as specified under Subparagraph 3-201.17(A)(1) and GAME ANIMALS under a voluntary inspection program as specified under Subparagraph 3-201.17(A)(2);

(2) 68oC (155oF) for 15 seconds or the temperature specified in the following chart that corresponds to the holding time for ratites and INJECTED MEATS; the following if they are

55 COMMINUTED: FISH, MEAT, GAME ANIMALS commercially raised for FOOD as specified under Subparagraph 3-201.17(A)(1), and GAME ANIMALS under a voluntary inspection program as specified under Subparagraph 3-201.17(A)(2); and raw eggs that are not prepared as specified under Subparagraph (A)(1)(a) of this section:

Minimum Temperature Time oC (oF) 63 (145) 3 minutes 66 (150) 1 minute 70 (158) < 1 second (instantaneous)

;or

(3) 74oC (165oF) or above for 15 seconds for POULTRY, wild GAME ANIMALS as specified under Subparagraphs 3- 201.17(A)(3) and (4), stuffed FISH, stuffed MEAT, stuffed pasta, stuffed POULTRY, stuffed ratites, or stuffing containing FISH, MEAT, POULTRY, or ratites.

(B) Whole beef roasts, corned beef roasts, pork roasts, and cured pork roasts such as ham, shall be cooked:

(1) In an oven that is preheated to the temperature specified for the roast's weight in the following chart and that is held at that temperature:

56 Oven Type Oven Temperature Based on Roast Weight

Less than 4.5 kg (10 lbs) 4.5 kg (10 lbs) or More

Still Dry 177oC (350oF) or more 121oC (250oF) or more Convection 163oC (325oF) or more 121oC (250oF) or more High Humidity1 121oC (250oF) or less 121oC (250oF) or less

1 Relative humidity greater than 90% for at least 1 hour as measured in the cooking chamber or exit of the oven; or in a moisture-impermeable bag that provides 100% humidity.

;and

(2) As specified in the following chart, to heat all parts of the FOOD to a temperature and for the holding time that corresponds to that temperature:

Temperature Time1 Temperature Time1 Temperature Time1 oC (oF) in oC (oF) in oC (oF) in Minutes Minutes Minutes 54 (130) 121 58 (136) 32 61 (142) 8 56 (132) 77 59 (138) 19 62 (144) 5 57 (134) 47 60 (140) 12 63 (145) 3

1 Holding time may include postoven heat rise.

(C) A raw or undercooked WHOLE-MUSCLE, INTACT BEEF steak may be served or offered for sale in a READY-TO-EAT form if:

(1) The FOOD ESTABLISHMENT serves a population that is not a HIGHLY SUSCEPTIBLE POPULATION,

(2) The steak is labeled to indicate that it meets the definition of “WHOLE-MUSCLE, INTACT BEEF” as specified under ¶ 3- 201.11(E), and

(3) The steak is cooked on both the top and bottom to a surface temperature of 63oC (145oF) or above and a

57 cooked color change is achieved on all external surfaces.

(D) A raw animal FOOD such as raw egg, raw FISH, raw-marinated FISH, raw MOLLUSCAN SHELLFISH, or steak tartare; or a partially cooked FOOD such as lightly cooked FISH, soft cooked eggs, or rare MEAT other than WHOLE-MUSCLE, INTACT BEEF steaks as specified in ¶ (C) of this section, may be served or offered for sale in a READY-TO-EAT form if:

(1) The FOOD ESTABLISHMENT serves a population that is not a HIGHLY SUSCEPTIBLE POPULATION, and

(2) The CONSUMER is informed as specified under § 3- 603.11 that to ensure its safety, the FOOD should be cooked as specified under ¶ (A) or (B) of this section; or

(3) The REGULATORY AUTHORITY grants a VARIANCE from ¶ (A) or (B) of this section as specified in § 8-103.10 based on a HACCP PLAN that:

(a) Is submitted by the LICENSE HOLDER and APPROVED as specified under § 8-103.11,

(b) Documents scientific data or other information showing that a lesser time and temperature regimen results in a safe FOOD, and

(c) Verifies that EQUIPMENT and procedures for FOOD preparation and training of FOOD EMPLOYEES at the FOOD ESTABLISHMENT meet the conditions of the VARIANCE.

3-401.12 Microwave Cooking.*

Raw animal FOODS cooked in a microwave oven shall be:

(A) Rotated or stirred throughout or midway during cooking to compensate for uneven distribution of heat;

(B) Covered to retain surface moisture;

(C) Heated to a temperature of at least 74oC (165oF) in all parts of the food; and

58 (D) Allowed to stand covered for 2 minutes after cooking to obtain temperature equilibrium.

3-401.13 Plant Food Cooking for Hot Holding.

Fruits and vegetables that are cooked for hot holding shall be cooked to a temperature of 54oC (130oF).

Freezing 3-402.11 Parasite Destruction.*

(A) Except as specified in ¶ (B) of this section, before service or sale in READY-TO-EAT form, raw, raw-marinated, partially cooked, or marinated-partially cooked FISH other than MOLLUSCAN SHELLFISH shall be frozen throughout to a temperature of:

(1) -20oC (-4oF) or below for 168 hours (7 days) in a freezer; or

(2) -35oC (-31oF) or below for 15 hours in a blast freezer.

(B) If the FISH are tuna of the species Thunnus alalunga, Thunnus albacares (Yellowfin tuna), Thunnus atlanticus, Thunnus maccoyii (Bluefin tuna, Southern), Thunnus obesus (Bigeye tuna), or Thunnus thynnus (Bluefin tuna, Northern), the FISH may be served or sold in a raw, raw-marinated, or partially cooked READY-TO-EAT form without freezing as specified under ¶ (A) of this section.

3-402.12 Records, Creation and Retention.

(A) Except as specified in ¶ 3-402.11(B) and ¶ (B) of this section, if raw, raw-marinated, partially cooked, or marinated-partially cooked FISH are served or sold in READY-TO-EAT form, the PERSON IN CHARGE shall record the freezing temperature and time to which the FISH are subjected and shall retain the records at the FOOD ESTABLISHMENT for 90 calendar days beyond the time of service or sale of the FISH.

(B) If the FISH are frozen by a supplier, a written agreement or statement from the supplier stipulating that the FISH supplied are frozen to a temperature and for a time specified under § 3-402.11 may substitute for the records specified under ¶ (A) of this section.

59 Reheating 3-403.10 Preparation for Immediate Service.

Cooked and refrigerated FOOD that is prepared for immediate service in response to an individual CONSUMER order, such as a roast beef sandwich au jus, may be served at any temperature.

3-403.11 Reheating for Hot Holding.*

(A) Except as specified under ¶¶ (B) and (C) and in ¶ (E) of this section, POTENTIALLY HAZARDOUS FOOD that is cooked, cooled, and reheated for hot holding shall be reheated so that all parts of the FOOD reach a temperature of at least 74oC (165oF) for 15 seconds.

(B) Except as specified under ¶ (C) of this section, POTENTIALLY HAZARDOUS FOOD reheated in a microwave oven for hot holding shall be reheated so that all parts of the FOOD reach a temperature of at least 74oC (165oF) and the FOOD is rotated or stirred, covered, and allowed to stand covered for 2 minutes after reheating.

(C) READY-TO-EAT FOOD taken from a commercially processed, HERMETICALLY SEALED CONTAINER, or from an intact package from a FOOD PROCESSING PLANT that is inspected by the FOOD regulatory agency that has jurisdiction over the plant, shall be heated to a temperature of at least 54oC (130oF) for hot holding.

(D) Reheating for hot holding shall be done rapidly and the time the FOOD is between the temperature specified under ¶ 3-501.16(B) or (C) and 74oC (165oF) may not exceed 2 hours.

(E) Remaining unsliced portions of roasts of beef that are cooked as specified under ¶ 3-401.11(B) may be reheated for hot holding using the oven parameters and minimum time and temperature conditions specified under ¶ 3-401.11(B).

60 3-5 LIMITATION OF GROWTH OF ORGANISMS OF PUBLIC HEALTH CONCERN

Subparts

3-501 Temperature and Time Control 3-502 Specialized Processing Methods

Temperature 3-501.11 Frozen Food. and Time Control Stored frozen FOODS shall be maintained frozen.

3-501.12 Potentially Hazardous Food, Slacking.

Frozen POTENTIALLY HAZARDOUS FOOD that is slacked to moderate the temperature shall be held:

(A) Under refrigeration that maintains the FOOD temperature at 5oC (41oF) or less, or at 7oC (45oF) or less as specified under ¶ 3-501.16(C); or

(B) At any temperature if the FOOD remains frozen.

3-501.13 Thawing.

Except as specified in ¶ (D) of this section, POTENTIALLY HAZARDOUS FOOD shall be thawed:

(A) Under refrigeration that maintains the FOOD temperature at 5oC (41oF) or less, or at 7oC (45oF) or less as specified under ¶ 3-501.16(C); or

(B) Completely submerged under running water:

(1) At a water temperature of 21oC (70oF) or below,

(2) With sufficient water velocity to agitate and float off loose particles in an overflow, and

61 (3) For a period of time that does not allow thawed portions of READY-TO-EAT FOOD to rise above 5oC (41oF), or 7oC (45oF) as specified under ¶ 3-501.16(C), or

(4) For a period of time that does not allow thawed portions of a raw animal FOOD requiring cooking as specified under ¶ 3-401.11(A) or (B) to be above 5oC (41oF), or 7oC (45oF) as specified under ¶ 3-501.16(C), for more than 4 hours including:

(a) The time the FOOD is exposed to the running water and the time needed for preparation for cooking, or

(b) The time it takes under refrigeration to lower the FOOD temperature to 5oC (41oF), or 7oC (45oF) as specified under ¶ 3-501.16(C);

(C) As part of a cooking process if the FOOD that is frozen is:

(1) Cooked as specified under ¶ 3-401.11(A) or (B) or § 3-401.12, or

(2) Thawed in a microwave oven and immediately transferred to conventional cooking EQUIPMENT , with no interruption in the process; or

(D) Using any procedure if a portion of frozen READY-TO-EAT FOOD is thawed and prepared for immediate service in response to an individual CONSUMER'S order.

3-501.14 Cooling.*

(A) Cooked POTENTIALLY HAZARDOUS FOOD shall be cooled:

(1) Within 2 hours, from 54oC (130oF) to 21oC (70oF); and

(2) Within 4 hours, from 21oC (70oF) to 5oC (41oF) or less, or to 7oC (45oF) as specified under ¶ 3-501.16(C).

(B) POTENTIALLY HAZARDOUS FOOD shall be cooled within 4 hours to 5oC (41oF) or less, or to 7oC (45oF) as specified under ¶ 3-501.16(C) if prepared from ingredients at ambient temperature, such as reconstituted FOODS and canned tuna.

62 (C) Except as specified in ¶ (D) of this section, a POTENTIALLY HAZARDOUS FOOD received in compliance with LAWS allowing a temperature above 5oC (41oF) during shipment from the supplier as specified in ¶ 3-202.11(B), shall be cooled within 4 hours to 5oC (41oF) or less, or 7oC (45oF) or less as specified under ¶ 3-501.16(C).

(D) Shell eggs need not comply with ¶ (C) of this section if the eggs are placed immediately upon their receipt in refrigerated EQUIPMENT that is capable of maintaining FOOD at 5oC (41oF) or less, or 7oC (45oF) or less as specified under ¶ 3-501.16(C).

3-501.15 Cooling Methods.

(A) Cooling shall be accomplished in accordance with the time and temperature criteria specified under § 3-501.14 by using one or more of the following methods based on the type of FOOD being cooled:

(1) Placing the FOOD in shallow pans;

(2) Separating the FOOD into smaller or thinner portions;

(3) Using rapid cooling EQUIPMENT ;

(4) Stirring the FOOD in a container placed in an ice water bath;

(5) Using containers that facilitate heat transfer;

(6) Adding ice as an ingredient; or

(7) Other effective methods.

(B) When placed in cooling or cold holding EQUIPMENT , FOOD containers in which FOOD is being cooled shall be:

(1) Arranged in the EQUIPMENT to provide maximum heat transfer through the container walls; and

(2) Loosely covered, or uncovered if protected from overhead contamination as specified under Subparagraph 3-305.11(A)(2), during the cooling period to facilitate heat transfer from the surface of the FOOD.

63 3-501.16 Potentially Hazardous Food, Hot and Cold Holding.*

Except during preparation, cooking, or cooling, or when time is used as the public health control as specified under § 3-501.19, POTENTIALLY HAZARDOUS FOOD shall be maintained:

(A) At 54oC (130oF) or above, or

(B) At 5oC (41oF) or less, except as specified under ¶ (C) of this section and §§ 3-501.17, 3-501.18, and 4-204.111.

(C) At 7oC (45oF) or between 7oC (45oF) and 5oC (41oF) in existing refrigeration EQUIPMENT that is not capable of maintaining the FOOD at 5oC (41oF) or less if:

(1) The EQUIPMENT is in place and in use in the FOOD ESTABLISHMENT ; and

(2) Within 10 years of the adoption of this Code, the EQUIPMENT is upgraded or replaced to maintain FOOD at a temperature of 5oC (41oF) or less.

3-501.17 Ready-to-Eat, Potentially Hazardous Food, Date Marking.* on-premises (A) Except as specified in ¶ (E) of this section, refrigerated, preparation READY-TO-EAT, POTENTIALLY HAZARDOUS FOOD prepared and held • prepare and refrigerated for more than 24 hours in a FOOD ESTABLISHMENT shall hold cold be clearly marked at the time of preparation to indicate the date by which the FOOD shall be consumed which is, including the day of preparation:

(1) 7 calendar days or less from the day that the FOOD is prepared, if the FOOD is maintained at 5oC (41oF) or less; or

(2) 4 calendar days or less from the day the FOOD is prepared, if the FOOD is maintained at 7oC (45oF) or less as specified under ¶ 3-501.16(C).

(B) Except as specified in ¶ (E) of this section, a READY-TO-EAT, POTENTIALLY HAZARDOUS FOOD prepared in a FOOD ESTABLISHMENT and subsequently frozen, shall be clearly marked:

• prepare, freeze, (1) When the FOOD is thawed, to indicate that the FOOD shall be

64 thaw, immediate consumed within 24 hours; or use

• prepare, hold (2) When the FOOD is placed into the freezer, to indicate the cold, freeze, length of time before freezing that the FOOD is held refrigerated thaw, and which is, including the day of preparation: hold cold (a) 7 calendar days or less from the day of preparation, if the FOOD is maintained at 5oC (41oF) or less, or

(b) 4 calendar days or less from the day of preparation, if the FOOD is maintained at 7oC (45oF) or less as specified under ¶ 3-501.16(C); and

(3) When the FOOD is removed from the freezer, to indicate the date by which the FOOD shall be consumed which is:

(a) 7 calendar days or less after the FOOD is removed from the freezer, minus the time before freezing, that the FOOD is held refrigerated if the FOOD is maintained at 5oC (41oF) or less before and after freezing, or

(b) 4 calendar days or less after the FOOD is removed from the freezer, minus the time before freezing, that the FOOD is held refrigerated if the FOOD is maintained at 7oC (45oF) or less as specified under ¶ 3-501.16(C) before and after freezing. commercially (C) Except as specified in ¶¶ (E) and (F) of this section, a processed food container of refrigerated, READY-TO-EAT POTENTIALLY HAZARDOUS • open and hold FOOD prepared and PACKAGED by a FOOD PROCESSING PLANT shall cold be clearly marked, at the time the original container is opened in a FOOD ESTABLISHMENT , to indicate the date by which the FOOD shall be consumed which is, including the day the original container is opened:

(1) 7 calendar days or less after the original container is opened, if the FOOD is maintained at 5oC (41oF) or less; or

(2) 4 calendar days or less from the day the original container is opened, if the FOOD is maintained at 7oC (45oF) or less as specified under ¶ 3-501.16(C).

(D) Except as specified in ¶¶ (E) and (F) of this section, a container of refrigerated, READY-TO-EAT, POTENTIALLY HAZARDOUS FOOD prepared and PACKAGED by a FOOD PROCESSING PLANT and

65 subsequently opened and frozen in a FOOD ESTABLISHMENT shall be clearly marked:

• open, freeze, (1) When the FOOD is thawed, to indicate that the FOOD shall be thaw, immediate consumed within 24 hours; or use

• open, hold cold, (2) To indicate the time between the opening of the original freeze, thaw, container and freezing that the FOOD is held refrigerated and hold cold which is, including the day of opening the original container:

(a) 7 calendar days or less, after opening the original container if the FOOD is maintained at 5oC (41oF) or less, or

(b) 4 calendar days or less after opening the original container if the FOOD is maintained at 7oC (45oF) or less as specified under ¶ 3-501.16(C); and

(3) When the FOOD is removed from the freezer, to indicate the date by which the FOOD shall be consumed which is:

(a) 7 calendar days, minus the time before freezing, that the FOOD is held refrigerated if the FOOD is maintained at 5oC (41oF) or less before and after freezing, or

(b) 4 calendar days, minus the time before freezing, that the FOOD is held refrigerated if the FOOD is maintained at 7oC (45oF) or less as specified under ¶ 3-501.16(C) before and after freezing.

(E) Paragraphs (A)-(D) of this section do not apply to individual meal portions served or rePACKAGED for sale from a bulk container upon a CONSUMER'S request.

(F) Paragraphs (C) and (D) of this section do not apply to whole, unsliced portions of a cured and processed product with original casing maintained on the remaining portion, such as bologna, salami, or other sausage in a cellulose casing.

66 3-501.18 Ready-to-Eat, Potentially Hazardous Food, Disposition.*

(A) A FOOD specified under ¶ 3-501.17(A) shall be discarded if not consumed within:

(1) 7 calendar days from the date of preparation if the FOOD is maintained at 5oC (41oF) or less; or

(2) 4 calendar days from the date of preparation if the FOOD is maintained at 7oC (45oF) or less as specified under ¶ 3-501.16(C).

(B) A FOOD specified under Subparagraph 3-501.17(B)(1) or (D)(1) shall be discarded if not consumed within 24 hours after thawing.

(C) A FOOD specified under Subparagraphs 3-501.17(B)(2) and (3) or (D)(2) and (3) shall be discarded on or before the most recent date marked on the FOOD container or PACKAGE if the FOOD is not consumed by that date.

(D) A FOOD specified under ¶ 3-501.17(C) shall be discarded if not consumed within, including the day of opening the original container: (1) 7 calendar days after the date that the original PACKAGE is opened in a FOOD ESTABLISHMENT if the FOOD is maintained at 5oC (41oF) or less; or

(2) 4 calendar days after the date that the original PACKAGE is opened in a FOOD ESTABLISHMENT if the FOOD is maintained at 7oC (45oF) or less as specified under ¶ 3-501.16(C).

(E) A FOOD specified under ¶ 3-501.17(A), (B), (C), or (D) shall be discarded if the FOOD is:

(1) Marked with the date specified under ¶ 3-501.17(A), (B), (C), or (D) and the FOOD is not consumed before the most recent date expires;

(2) In a container or PACKAGE which does not bear a date or time; or

(3) Inappropriately marked with a date or time that exceeds the

67 date or time specified under ¶ 3-501.17(A), (B), (C), or (D).

(F) Refrigerated, READY-TO-EAT, POTENTIALLY HAZARDOUS FOOD prepared in a FOOD ESTABLISHMENT and dispensed through a VENDING MACHINE with an automatic shut-off control that is activated at a temperature of:

(1) 5oC (41oF) shall be discarded if not sold within 7 days; or

(2) 7oC (45oF) shall be discarded if not sold within 4 days.

(G) A refrigerated, potentially hazardous, READY-TO-EAT FOOD ingredient or a portion of a refrigerated, potentially hazardous, READY-TO-EAT FOOD that is subsequently combined with additional ingredients or portions of FOOD shall retain the date marking of the earliest or first-prepared ingredient or portion and shall be discarded as specified under ¶¶ 3-501.18(A) - (F).

3-501.19 Time as a Public Health Control.*

(A) Except as specified under ¶ (B) of this section, if time only, rather than time in conjunction with temperature, is used as the public health control for a working supply of POTENTIALLY HAZARDOUS FOOD before cooking, or for READY-TO-EAT POTENTIALLY HAZARDOUS FOOD that is displayed or held for service for immediate consumption:

(1) The FOOD shall be marked or otherwise identified to indicate the time that is 4 hours past the point in time when the FOOD is removed from temperature control,

(2) The FOOD shall be cooked and served, served if READY-TO- EAT, or discarded, within 4 hours from the point in time when the FOOD is removed from temperature control,

(3) The FOOD in unmarked containers or packages or marked to exceed a 4 hour limit shall be discarded, and

(4) Written procedures shall be maintained in the FOOD ESTABLISHMENT and made available to the REGULATORY AUTHORITY upon request, that ensure compliance with:

(a) Subparagraphs (A)(1)-(4) of this section, and

(b) § 3-501.14 for FOOD that is prepared, cooked, and refrigerated before time is used as a public health control.

68 (B) In a FOOD ESTABLISHMENT that serves a HIGHLY SUSCEPTIBLE POPULATION, time only, rather than time in conjunction with temperature, may not be used as the public health control for raw eggs.

Specialized 3-502.11 Variance Requirement.* Processing Methods A FOOD ESTABLISHMENT shall obtain a VARIANCE from the REGULATORY AUTHORITY as specified in § 8-103.10 and under § 8-103.11 before smoking FOOD as a method of FOOD preservation rather than as a method of flavor enhancement; curing FOOD; alcoholic BEVERAGES; using FOOD ADDITIVES or adding components such as vinegar as a method of FOOD preservation rather than as a method of flavor enhancement or to render a FOOD so that it is not POTENTIALLY HAZARDOUS; packaging FOOD using a REDUCED OXYGEN PACKAGING method except as specified under § 3-502.12 where a barrier to Clostridium botulinum in addition to refrigeration exists; or preparing FOOD by another method that is determined by the REGULATORY AUTHORITY to require a VARIANCE.

Clostridium 3-502.12 Reduced Oxygen Packaging, Criteria.* botulinum Controls (A) Except for a FOOD ESTABLISHMENT that obtains a VARIANCE as specified under § 3-502.11, a FOOD ESTABLISHMENT that packages FOOD using a REDUCED OXYGEN PACKAGING method and Clostridium botulinum is identified as a microbiological HAZARD in the final PACKAGED form shall ensure that there are at least two barriers in place to control the growth and toxin formation of C. botulinum.

(B) A FOOD ESTABLISHMENT that packages FOOD using a REDUCED OXYGEN PACKAGING method and Clostridium botulinum is identified as a microbiological HAZARD in the final PACKAGED form shall have a HACCP PLAN that contains the information specified under ¶ 8-201.14(D) and that:

(1) Identifies the FOOD to be PACKAGED;

(2) Limits the FOOD PACKAGED to a FOOD that does not support the growth of Clostridium botulinum because it complies with one of the following:

69 (a) Has an aw of 0.91 or less,

(b) Has a pH of 4.6 or less,

(c) Is a MEAT or POULTRY product cured at a FOOD PROCESSING PLANT regulated by the U.S.D.A. using substances specified in 9 CFR 318.7 Approval of substances for use in the preparation of products and 9 CFR 381.147 Restrictions on the use of substances in poultry products and is received in an intact package, or

(d) Is a FOOD with a high level of competing organisms such as raw MEAT or raw POULTRY;

(3) Specifies methods for maintaining FOOD at 5oC (41oF) or below;

(4) Describes how the packages shall be prominently and conspicuously labeled on the principal display panel in bold type on a contrasting background, with instructions to:

(a) Maintain the FOOD at 5oC (41oF) or below, and

(b) Discard the FOOD if within 14 calendar days of its packaging it is not served for on-PREMISES consumption, or consumed if served or sold for off-PREMISES consumption;

(5) Limits the to no more than 14 calendar days from packaging to consumption or the original manufacturer's "sell by" or "use by" date, whichever occurs first;

(6) Includes operational procedures that:

(a) Prohibit contacting FOOD with bare hands,

(b) Identify a designated area and the method by which:

(i) Physical barriers or methods of separation of raw FOODS and READY-TO-EAT FOODS minimize cross contamination, and

(ii) Access to the processing EQUIPMENT is restricted to responsible trained personnel familiar with the potential HAZARDS of the operation, and

70 (c) Delineate cleaning and SANITIZATION procedures for FOOD-CONTACT SURFACES; and

(7) Describes the training program that ensures that the individual responsible for the REDUCED OXYGEN PACKAGING operation understands the:

(a) Concepts required for a safe operation,

(b) EQUIPMENT and facilities, and

(c) Procedures specified under Subparagraph (A)(6) of this section and ¶ 8-201.14(D).

(C) Except for FISH that is frozen before, during, and after packaging, a FOOD ESTABLISHMENT may not package FISH using a REDUCED OXYGEN PACKAGING method.

3-6 FOOD IDENTITY, PRESENTATION, AND ON-PREMISES LABELING

Subparts

3-601 Accurate Representation 3-602 Labeling 3-603 Consumer Advisory

Accurate 3-601.11 Standards of Identity. Representation PACKAGED FOOD shall comply with standard of identity requirements in 21 CFR 131-169 and 9 CFR 319 Definitions and Standards of Identity or Composition, and the general requirements in 21 CFR 130 - Food Standards: General and 9 CFR 319 Subpart A - General.

71 3-601.12 Honestly Presented.

(A) FOOD shall be offered for human consumption in a way that does not mislead or misinform the CONSUMER.

(B) FOOD or COLOR ADDITIVES, colored overwraps, or lights may not be used to misrepresent the true appearance, color, or quality of a FOOD.

Labeling 3-602.11 Food Labels.

(A) FOOD PACKAGED in a FOOD ESTABLISHMENT , shall be labeled as specified in LAW, including 21 CFR 101 - Food Labeling, and 9 CFR 317 Labeling, Marking Devices, and Containers.

(B) Label information shall include:

(1) The common name of the FOOD, or absent a common name, an adequately descriptive identity statement;

(2) If made from two or more ingredients, a list of ingredients in descending order of predominance by weight, including a declaration of artificial color or flavor and chemical , if contained in the FOOD;

(3) An accurate declaration of the quantity of contents;

(4) The name and place of business of the manufacturer, packer, or distributor; and

(5) Except as exempted in the Federal Food, Drug, and Cosmetic Act § 403(Q)(3)-(5), nutrition labeling as specified in 21 CFR 101 - FOOD Labeling and 9 CFR 317 Subpart B Nutrition Labeling.

(C) Bulk FOOD that is available for CONSUMER self-dispensing shall be prominently labeled with the following information in plain view of the CONSUMER:

(1) The manufacturer's or processor's label that was provided with the FOOD; or

(2) A card, sign, or other method of notification that includes the information specified under Subparagraphs (B)(1), (2), and (5) of this section.

72 (D) Bulk, unPACKAGED FOODS such as bakery products and unPACKAGED FOODS that are portioned to CONSUMER specification need not be labeled if:

(1) A health, content, or other claim is not made;

(2) There are no state or local LAWS requiring labeling; and

(3) The FOOD is manufactured or prepared on the PREMISES of the FOOD ESTABLISHMENT or at another FOOD ESTABLISHMENT or a FOOD PROCESSING PLANT that is owned by the same PERSON and is regulated by the FOOD regulatory agency that has jurisdiction.

3-602.12 Other Forms of Information.

(A) If required by LAW, CONSUMER warnings shall be provided.

(B) FOOD ESTABLISHMENT or manufacturers' dating information on FOODS may not be concealed or altered.

73 This page is intended to be blank. Current Status of Consumer Advisory Language Regarding § 3-603.11

The following information is not part of Chapter 3 and is not intended to be included in the codified portion of the Food Code. It is inserted here to provide a summary of recent events surrounding the matter of a consumer advisory, addressed in § 3-603.11 of the Code. In cases where the Food Code is adopted through incorporation by reference, this page may be removed.

A consensus as to what constitutes satisfactory compliance with § 3-603.11 was reached at the 1998 Conference for Food Protection (CFP) meeting. A third option for the consumer “reminder” was added later. This insert page is to alert the reader to the options available to food establishments in advising consumers of the increased possibility of foodborne illness when animal-derived foods are eaten raw or undercooked.

Included in Annex 3 is a full discussion of the evolution of the 1998 CFP consensus, satisfactory compliance, applicability of the Code provision, and the meaning and application of the phrase that appears in § 3-603.11, i.e., “or otherwise processed to eliminate pathogens.”

There are two components to satisfactory compliance: Disclosure and Reminder. Disclosure is satisfied when:

(1) Items are described, such as: (a) Oysters on the half-shell (raw oysters), (b) Raw-egg Caesar salad, and (c) Hamburgers (can be cooked to order); or

(2) Items are asterisked to a footnote that states that the items: (a) Are served raw or undercooked, or (b) Contain (or may contain) raw or undercooked ingredients.

Reminder is satisfied when the items requiring disclosure are asterisked to a footnote that states:

(1) Regarding the safety of these items, written information is available upon request;1

(2) Consuming raw or undercooked meats, poultry, seafood, shellfish, or eggs may increase your risk of foodborne illness; or

(3) Consuming raw or undercooked meats, poultry, seafood, shellfish, or eggs may increase your risk of foodborne illness, especially if you have certain medical conditions. ______1Essential criteria for such written information are being developed and will be made available, with a downloadable model brochure, on the CFSAN Web Page at http://www.cfsan.fda.gov. All brochures must meet these essential criteria. Consumer 3-603.11 Consumption of Animal Foods that are Raw, Advisory Undercooked, or Not Otherwise Processed to Eliminate Pathogens.*

Except as specified in ¶ 3-401.11(C) and Subparagraph 3-401.11(D)(3) and under ¶ 3-801.11(D), if an animal FOOD such as beef, eggs, FISH, lamb, pork, POULTRY, or shellfish that is raw, undercooked, or not otherwise processed to eliminate pathogens is offered in a READY-TO-EAT form as a deli, , vended, or other item; or as a raw ingredient in another READY-TO-EAT FOOD, the LICENSE HOLDER shall inform CONSUMERS by brochures, deli case or menu advisories, label statements, table tents, placards, or other effective written means of the significantly increased risk associated with certain especially vulnerable CONSUMERS eating such FOODS in raw or undercooked form.

3-7 CONTAMINATED FOOD

Subpart

3-701 Disposition

Disposition 3-701.11 Discarding or Reconditioning Unsafe, Adulterated, or Contaminated Food.*

(A) A FOOD that is unsafe, ADULTERATED, or not honestly presented as specified under § 3-101.11 shall be reconditioned according to an APPROVED procedure or discarded.

(B) FOOD that is not from an APPROVED source as specified under §§ 3-201.11 through .17 shall be discarded.

(C) READY-TO-EAT FOOD that may have been contaminated by an EMPLOYEE who has any of the conditions that require reporting to the PERSON IN CHARGE under § 2-201.11 or who has been excluded by the REGULATORY AUTHORITY under the communicable disease rules at 9 A.A.C. 6 shall be discarded.

(D) FOOD that is contaminated by FOOD EMPLOYEES, CONSUMERS, or other PERSONS through contact with their hands, bodily discharges, such as nasal or oral discharges, or other means shall be discarded.

73

3-8 SPECIAL REQUIREMENTS FOR HIGHLY SUSCEPTIBLE POPULATIONS

Subpart

3-801 Additional Safeguards

Additional 3-801.11 Pasteurized Foods, Prohibited Reservice, and Safeguards Prohibited Food.*

In a FOOD ESTABLISHMENT that serves a HIGHLY SUSCEPTIBLE POPULATION:

(A) PrePACKAGED JUICE or a prePACKAGED beverage containing JUICE, that bears a warning label as specified in 21 CFR, Section 101.17(g) Food Labeling, may not be served or offered for sale;

(B) Pasteurized shell eggs or pasteurized liquid, frozen, or dry eggs or egg products shall be substituted for raw shell eggs in the preparation of:

(1) FOODS such as Caesar salad, hollandaise or Béarnaise sauce, mayonnaise, egg nog, ice cream, and egg-fortified BEVERAGES, and

(2) Except as specified in ¶ (E) of this section, recipes in which more than one egg is broken and the eggs are combined;

(C) FOOD in an unopened original package may not be re-served; and

(D) The following FOODS may not be served or offered for sale in a READY-TO-EAT form:

(1) Raw animal FOODS such as raw FISH, raw-marinated FISH, raw MOLLUSCAN SHELLFISH, and steak tartare,

(2) A partially cooked animal FOOD such as lightly cooked FISH, rare MEAT, soft-cooked eggs that are made from raw shell eggs, and meringue, and

(3) Raw seed sprouts.

74 (E) Subparagraph (B)(2) of this section does not apply if:

(1) The raw eggs are combined immediately before cooking for one CONSUMER’S serving at a single meal, cooked as specified under Subparagraph 3- 401.11(A)(1), and served immediately, such as an omelet, soufflé, or scrambled eggs;

(2) The raw eggs are combined as an ingredient immediately before baking and the eggs are thoroughly cooked to a READY-TO-EAT form, such as a cake, muffin, or bread; or

(3) The preparation of the food is conducted under a HACCP PLAN that:

(a) Identifies the FOOD to be prepared,

(b) Prohibits contacting READY-TO-EAT FOOD with bare hands,

(c) Includes specifications and practices that ensure:

(i) Salmonella Enteritidis growth is controlled before and after cooking, and

(ii) Salmonella Enteritidis is destroyed by cooking the eggs according to the temperature and time specified in subparagraph 3-401.11(A)(2),

(d) Contains the information specified under ¶ 8-201.14(D) including procedures that:

(i) Control cross contamination of READY-TO-EAT FOOD with raw eggs, and

(ii) Delineate cleaning and SANITIZATION procedures for FOOD- CONTACT SURFACES, and

(e) Describes the training program that ensures that the FOOD EMPLOYEE responsible for the

75 preparation of the FOOD understands the procedures to be used.

76 Chapter

4 Equipment, Utensils, and Linens

Parts

4-1 MATERIALS FOR CONSTRUCTION AND REPAIR 4-2 DESIGN AND CONSTRUCTION 4-3 NUMBERS AND CAPACITIES 4-4 LOCATION AND INSTALLATION 4-5 MAINTENANCE AND OPERATION 4-6 CLEANING OF EQUIPMENT AND UTENSILS 4-7 SANITIZATION OF EQUIPMENT AND UTENSILS 4-8 LAUNDERING 4-9 PROTECTION OF CLEAN ITEMS

4-1 MATERIALS FOR CONSTRUCTION AND REPAIR

Subparts

4-101 Multiuse 4-102 Single-Service and Single-Use

Multiuse 4-101.11 Characteristics.*

Materials that are used in the construction of UTENSILS and FOOD- CONTACT SURFACES of EQUIPMENT may not allow the migration of deleterious substances or impart colors, odors, or tastes to FOOD and under normal use conditions shall be:

(A) Safe;

(B) Durable, CORROSION-RESISTANT, and nonabsorbent;N

(C) Sufficient in weight and thickness to withstand repeated WAREWASHING;N

(D) Finished to have a SMOOTH, EASILY CLEANABLE surface;N and

77 (E) Resistant to pitting, chipping, crazing, scratching, scoring, distortion, and decomposition.N

4-101.12 Cast Iron, Use Limitation.

(A) Except as specified in ¶¶ (B) and (C) of this section, cast iron may not be used for UTENSILS or FOOD-CONTACT SURFACES of EQUIPMENT.

(B) Cast iron may be used as a surface for cooking.

(C) Cast iron may be used in UTENSILS for serving FOOD if the UTENSILS are used only as part of an uninterrupted process from cooking through service.

4-101.13 Lead in Ceramic, , and Crystal Utensils, Use Limitation.

Ceramic, china, crystal UTENSILS, and decorative UTENSILS such as hand painted ceramic or china that are used in contact with FOOD shall be lead-free or contain levels of lead not exceeding the limits of the following UTENSIL categories:

Utensil Description Maximum Lead Category mg/L Hot Beverage Mugs Coffee Mugs 0.5

Large Hollowware Bowls $ 1.1 L 1 (1.16 QT) Small Hollowware Bowls < 1.1 L 2.0 (1.16 QT) Flat Utensils Plates, Saucers 3.0

4-101.14 Copper, Use Limitation.*

(A) Except as specified in ¶ (B) of this section, copper and copper alloys such as brass may not be used in contact with a FOOD that has a pH below 6 such as vinegar, JUICE, or wine or for a fitting or

78 tubing installed between a backflow prevention device and a carbonator.

(B) Copper and copper alloys may be used in contact with brewing ingredients that have a pH below 6 in the prefermentation and steps of a beer brewing operation such as a brewpub or microbrewery.

4-101.15 Galvanized Metal, Use Limitation.*

Galvanized metal may not be used for UTENSILS or FOOD-CONTACT SURFACES of EQUIPMENT that are used in contact with acidic FOOD.

4-101.16 Sponges, Use Limitation.

Sponges may not be used in contact with cleaned and SANITIZED or in- use FOOD-CONTACT SURFACES.

4-101.17 Lead in Pewter Alloys, Use Limitation.

Pewter alloys containing lead in excess of 0.05% may not be used as a FOOD-CONTACT SURFACE.

4-101.18 Lead in Solder and Flux, Use Limitation.

Solder and flux containing lead in excess of 0.2% may not be used as a FOOD-CONTACT SURFACE.

4-101.19 Wood, Use Limitation.

(A) Except as specified in ¶¶ (B), (C), and (D) of this section, wood and wood wicker may not be used as a FOOD-CONTACT SURFACE.

(B) Hard maple or an equivalently hard, close-grained wood may be used for:

(1) Cutting boards; cutting blocks; bakers' tables; and UTENSILS such as rolling pins, doughnut dowels, salad bowls, and chopsticks; and

(2) Wooden paddles used in confectionery operations for

79 pressure scraping kettles when manually preparing confections at a temperature of 110oC (230oF) or above.

(C) Whole, uncut, raw fruits and vegetables, and nuts in the shell may be kept in the wood shipping containers in which they were received, until the fruits, vegetables, or nuts are used.

(D) If the nature of the FOOD requires removal of rinds, peels, husks, or shells before consumption, the whole, uncut, raw FOOD may be kept in:

(1) Untreated wood containers; or

(2) Treated wood containers if the containers are treated with a preservative that meets the requirements specified in 21 CFR 178.3800 Preservatives for wood.

4-101.110 Nonstick Coatings, Use Limitation.

Multiuse KITCHENWARE such as frying pans, griddles, sauce pans, cookie sheets, and waffle bakers that have a perfluorocarbon resin coating shall be used with nonscoring or nonscratching UTENSILS and cleaning aids.

4-101.111 Nonfood-Contact Surfaces.

NonFOOD-CONTACT SURFACES of EQUIPMENT that are exposed to splash, spillage, or other FOOD soiling or that require frequent cleaning shall be constructed of a CORROSION-RESISTANT, nonabsorbent, and SMOOTH material.

Single-Service 4-102.11 Characteristics.* and Single-Use Materials that are used to make SINGLE-SERVICE and SINGLE-USE ARTICLES:

(A) May not:

(1) Allow the migration of deleterious substances, or

(2) Impart colors, odors, or tastes to FOOD;N and

(B) Shall be:

80 (1) Safe, and

(2) Clean.N

4-2 DESIGN AND CONSTRUCTION

Subparts

4-201 Durability and Strength 4-202 Cleanability 4-203 Accuracy 4-204 Functionality 4-205 Acceptability

Durability and 4-201.11 Equipment and Utensils. Strength EQUIPMENT and UTENSILS shall be designed and constructed to be durable and to retain their characteristic qualities under normal use conditions.

4-201.12 Food Temperature Measuring Devices.*

FOOD TEMPERATURE MEASURING DEVICES may not have sensors or stems constructed of glass, except that thermometers with glass sensors or stems that are encased in a shatterproof coating such as candy thermometers may be used.

Cleanability 4-202.11 Food-Contact Surfaces.*

(A) Multiuse FOOD-CONTACT SURFACES shall be:

(1) SMOOTH;

(2) Free of breaks, open seams, cracks, chips, inclusions, pits, and similar imperfections;

(3) Free of sharp internal angles, corners, and crevices;

(4) Finished to have SMOOTH welds and joints; and

81 (5) Except as specified in ¶ (B) of this section, accessible for cleaning and inspection by one of the following methods:

(a) Without being disassembled,

(b) By disassembling without the use of tools, or

(c) By easy disassembling with the use of handheld tools commonly available to maintenance and cleaning personnel such as screwdrivers, pliers, open-end wrenches, and Allen wrenches.

(B) Subparagraph (A)(5) of this section does not apply to cooking oil storage tanks, distribution lines for cooking oils, or beverage syrup lines or tubes.

4-202.12 CIP Equipment.

(A) CIP EQUIPMENT shall meet the characteristics specified under § 4-202.11 and shall be designed and constructed so that:

(1) Cleaning and SANITIZING solutions circulate throughout a fixed system and contact all interior FOOD-CONTACT SURFACES, and

(2) The system is self-draining or capable of being completely drained of cleaning and SANITIZING solutions; and

(B) CIP EQUIPMENT that is not designed to be disassembled for cleaning shall be designed with inspection access points to ensure that all interior FOOD-CONTACT SURFACES throughout the fixed system are being effectively cleaned.

4-202.13 "V" Threads, Use Limitation.

Except for hot oil cooking or filtering EQUIPMENT, "V" type threads may not be used on FOOD-CONTACT SURFACES.

4-202.14 Hot Oil Filtering Equipment.

Hot oil filtering EQUIPMENT shall meet the characteristics specified under § 4-202.11 or § 4-202.12 and shall be readily accessible for filter replacement and cleaning of the filter.

82 4-202.15 Can Openers.

Cutting or piercing parts of can openers shall be readily removable for cleaning and for replacement.

4-202.16 Nonfood-Contact Surfaces.

NonFOOD-CONTACT SURFACES shall be free of unnecessary ledges, projections, and crevices, and designed and constructed to allow easy cleaning and to facilitate maintenance.

4-202.17 Kick Plates, Removable.

Kick plates shall be designed so that the areas behind them are accessible for inspection and cleaning by being:

(A) Removable by one of the methods specified under Subparagraphs 4-202.11(E)(1)-(3) or capable of being rotated open; and

(B) Removable or capable of being rotated open without unlocking EQUIPMENT doors.

4-202.18 Ventilation Hood Systems, Filters.

Filters or other grease extracting EQUIPMENT shall be designed to be readily removable for cleaning and replacement if not designed to be cleaned in place.

Accuracy 4-203.11 Temperature Measuring Devices, Food.

(A) FOOD TEMPERATURE MEASURING DEVICES that are scaled only in Celsius or dually scaled in Celsius and Fahrenheit shall be accurate to ±1oC in the intended range of use.

(B) FOOD TEMPERATURE MEASURING DEVICES that are scaled only in Fahrenheit shall be accurate to ±2oF in the intended range of use.

83 4-203.12 Temperature Measuring Devices, Ambient Air and Water.

(A) Ambient air and water TEMPERATURE MEASURING DEVICES that are scaled in Celsius or dually scaled in Celsius and Fahrenheit shall be designed to be easily readable and accurate to ±1.5oC in the intended range of use.

(B) Ambient air and water TEMPERATURE MEASURING DEVICES that are scaled only in Fahrenheit shall be accurate to ±3oF in the intended range of use.

4-203.13 Pressure Measuring Devices, Mechanical Warewashing Equipment.

Pressure measuring devices that display the pressures in the water supply line for the fresh hot water SANITIZING rinse shall have increments of 7 kilopascals (1 pounds per square inch) or smaller and shall be accurate to ± 14 kilopascals (± 2 pounds per square inch) in the 100-170 kilopascals (15-25 pounds per square inch) range.

Functionality 4-204.11 Ventilation Hood Systems, Drip Prevention.

Exhaust ventilation hood systems in FOOD preparation and WAREWASHING areas including components such as hoods, fans, guards, and ducting shall be designed to prevent grease or condensation from draining or dripping onto FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLE-SERVICE and SINGLE-USE ARTICLES.

4-204.12 Equipment Openings, Closures and Deflectors.

(A) A cover or lid for EQUIPMENT shall overlap the opening and be sloped to drain.

(B) An opening located within the top of a unit of EQUIPMENT that is designed for use with a cover or lid shall be flanged upward at least 5 millimeters (two-tenths of an inch).

(C) Except as specified under ¶ (D) of this section, fixed piping, TEMPERATURE MEASURING DEVICES, rotary shafts, and other parts extending into EQUIPMENT shall be provided with a watertight joint at the point where the item enters the EQUIPMENT.

84 (D) If a watertight joint is not provided:

(1) The piping, TEMPERATURE MEASURING DEVICES, rotary shafts, and other parts extending through the openings shall be equipped with an apron designed to deflect condensation, drips, and dust from openings into the FOOD; and

(2) The opening shall be flanged as specified under ¶ (B) of this section.

4-204.13 Dispensing Equipment, Protection of Equipment and Food.

In EQUIPMENT that dispenses or vends liquid FOOD or ice in unPACKAGED form:

(A) The delivery tube, chute, orifice, and splash surfaces directly above the container receiving the FOOD shall be designed in a manner, such as with barriers, baffles, or drip aprons, so that drips from condensation and splash are diverted from the opening of the container receiving the FOOD;

(B) The delivery tube, chute, and orifice shall be protected from manual contact such as by being recessed;

(C) The delivery tube or chute and orifice of EQUIPMENT used to vend liquid FOOD or ice in unPACKAGED form to self-service CONSUMERS shall be designed so that the delivery tube or chute and orifice are protected from dust, insects, rodents, and other contamination by a self-closing door if the EQUIPMENT is:

(1) Located in an outside area that does not otherwise afford the protection of an enclosure against the rain, windblown debris, insects, rodents, and other contaminants that are present in the environment, or

(2) Available for self-service during hours when it is not under the full-time supervision of a FOOD EMPLOYEE; and

(D) The dispensing EQUIPMENT actuating lever or mechanism and filling device of CONSUMER self-service BEVERAGE dispensing EQUIPMENT shall be designed to prevent contact with the lip-contact surface of glasses or cups that are refilled.

85 4-204.14 Vending Machine, Vending Stage Closure.

The dispensing compartment of a VENDING MACHINE including a machine that is designed to vend prePACKAGED FOOD that is not POTENTIALLY HAZARDOUS such as chips, mixes, and pretzels shall be equipped with a self-closing door or cover if the machine is:

(A) Located in an outside area that does not otherwise afford the protection of an enclosure against the rain, windblown debris, insects, rodents, and other contaminants that are present in the environment; or

(B) Available for self-service during hours when it is not under the full-time supervision of a FOOD EMPLOYEE.

4-204.15 Bearings and Gear Boxes, Leakproof.

EQUIPMENT containing bearings and gears that require lubricants shall be designed and constructed so that the lubricant can not leak, drip, or be forced into FOOD or onto FOOD-CONTACT SURFACES.

4-204.16 Beverage Tubing, Separation.

BEVERAGE tubing and cold-plate BEVERAGE cooling devices may not be installed in contact with stored ice. This section does not apply to cold plates that are constructed integrally with an ice storage bin.

4-204.17 Ice Units, Separation of Drains.

Liquid waste drain lines may not pass through an ice machine or ice storage bin.

4-204.18 Condenser Unit, Separation.

If a condenser unit is an integral component of EQUIPMENT, the condenser unit shall be separated from the FOOD and FOOD storage space by a dustproof barrier. 4-204.19 Can Openers on Vending Machines.

Cutting or piercing parts of can openers on VENDING MACHINES shall be protected from manual contact, dust, insects, rodents, and other contamination.

86 4-204.110 Molluscan Shellfish Tanks.

(A) Except as specified under ¶ (B) of this section, MOLLUSCAN SHELLFISH life support system display tanks may not be used to display shellfish that are offered for human consumption and shall be conspicuously marked so that it is obvious to the CONSUMER that the shellfish are for display only.

(B) MOLLUSCAN SHELLFISH life-support system display tanks that are used to store and display shellfish that are offered for human consumption shall be operated and maintained in accordance with a VARIANCE granted by the REGULATORY AUTHORITY as specified in § 8-103.10 and a HACCP PLAN that:

(1) Is submitted by the LICENSE HOLDER and APPROVED as specified under § 8-103.11; and

(2) Ensures that:

(a) Water used with FISH other than MOLLUSCAN SHELLFISH does not flow into the molluscan tank,

(b) The safety and quality of the shellfish as they were received are not compromised by the use of the tank, and

(c) The identity of the source of the SHELLSTOCK is retained as specified under § 3-203.12.

4-204.111 Vending Machines, Automatic Shutoff.*

(A) A machine vending POTENTIALLY HAZARDOUS FOOD shall have an automatic control that prevents the machine from vending FOOD:

(1) If there is a power failure, mechanical failure, or other condition that results in an internal machine temperature that can not maintain FOOD temperatures as specified under Chapter 3; and

(2) If a condition specified under Subparagraph (A)(1) of this section occurs, until the machine is serviced and restocked with FOOD that has been maintained at temperatures specified under Chapter 3.

(B) When the automatic shutoff within a machine vending POTENTIALLY HAZARDOUS FOOD is activated:

87 (1) In a refrigerated VENDING MACHINE, the ambient temperature may not exceed 5oC (41oF) or 7oC (45oF) as specified under ¶ 3-501.16(C) for more than 30 minutes immediately after the machine is filled, serviced, or restocked; or

(2) In a hot holding VENDING MACHINE, the ambient temperature may not be less than 60oC (140oF) for more than 120 minutes immediately after the machine is filled, serviced, or restocked.

4-204.112 Temperature Measuring Devices.

(A) In a mechanically refrigerated or hot FOOD storage unit, the sensor of a TEMPERATURE MEASURING DEVICE shall be located to measure the air temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot FOOD storage unit.

(B) Except as specified in ¶ (C) of this section, cold or hot holding EQUIPMENT used for POTENTIALLY HAZARDOUS FOOD shall be designed to include and shall be equipped with at least one integral or permanently affixed TEMPERATURE MEASURING DEVICE that is located to allow easy viewing of the device's temperature display.

(C) Paragraph (B) of this section does not apply to EQUIPMENT for which the placement of a TEMPERATURE MEASURING DEVICE is not a practical means for measuring the ambient air surrounding the FOOD because of the design, type, and use of the EQUIPMENT, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated FOOD transport containers, and salad bars.

(D) TEMPERATURE MEASURING DEVICES shall be designed to be easily readable.

(E) FOOD TEMPERATURE MEASURING DEVICES and water TEMPERATURE MEASURING DEVICES on WAREWASHING machines shall have a numerical scale, printed record, or digital readout in increments no greater than 1oC or 2oF in the intended range of use.

4-204.113 Warewashing Machine, Data Plate Operating Specifications.

A WAREWASHING machine shall be provided with an easily accessible and readable data plate affixed to the machine by the manufacturer that indicates the machine's design and operating specifications including the:

88 (A) Temperatures required for washing, rinsing, and SANITIZING;

(B) Pressure required for the fresh water SANITIZING rinse unless the machine is designed to use only a pumped SANITIZING rinse; and

(C) Conveyor speed for conveyor machines or cycle time for stationary rack machines.

4-204.114 Warewashing Machines, Internal Baffles.

WAREWASHING machine wash and rinse tanks shall be equipped with baffles, curtains, or other means to minimize internal cross contamination of the solutions in wash and rinse tanks.

4-204.115 Warewashing Machines, Temperature Measuring Devices.

A WAREWASHING machine shall be equipped with a TEMPERATURE MEASURING DEVICE that indicates the temperature of the water:

(A) In each wash and rinse tank; and

(B) As the water enters the hot water SANITIZING final rinse manifold or in the chemical SANITIZING solution tank.

4-204.116 Manual Warewashing Equipment, Heaters and Baskets.

If hot water is used for SANITIZATION in manual WAREWASHING operations, the SANITIZING compartment of the sink shall be:

(A) Designed with an integral heating device that is capable of maintaining water at a temperature not less than 77oC (171oF); and

(B) Provided with a rack or basket to allow complete immersion of equipment and utensils into the hot water.

4-204.117 Warewashing Machines, Sanitizer Level Indicator.

A WAREWASHING machine that uses a chemical for SANITIZATION and

89 that is installed after adoption of this Code by the REGULATORY AUTHORITY, shall be equipped with a device that indicates audibly or visually when more chemical SANITIZER needs to be added.

4-204.118 Warewashing Machines, Flow Pressure Device.

(A) WAREWASHING machines that provide a fresh hot water SANITIZING rinse shall be equipped with a pressure gauge or similar device such as a transducer that measures and displays the water pressure in the supply line immediately before entering the WAREWASHING machine; and

(B) If the flow pressure measuring device is upstream of the fresh hot water SANITIZING rinse control valve, the device shall be mounted in a 6.4 millimeter or one-fourth inch Iron Pipe Size (IPS) valve.

(C) Paragraphs (A) and (B) of this section do not apply to a machine that uses only a pumped or recirculated SANITIZING rinse.

4-204.119 Warewashing Sinks and Drainboards, Self-Draining.

Sinks and drainboards of WAREWASHING sinks and machines shall be self-draining.

4-204.120 Equipment Compartments, Drainage.

EQUIPMENT compartments that are subject to accumulation of moisture due to conditions such as condensation, FOOD or BEVERAGE drip, or water from melting ice shall be sloped to an outlet that allows complete draining.

4-204.121 Vending Machines, Liquid Waste Products.

(A) VENDING MACHINES designed to store BEVERAGES that are PACKAGED in containers made from paper products shall be equipped with diversion devices and retention pans or drains for container leakage.

(B) VENDING MACHINES that dispense liquid FOOD in bulk shall be:

90 (1) Provided with an internally mounted waste receptacle for the collection of drip, spillage, overflow, or other internal wastes; and

(2) Equipped with an automatic shutoff device that will place the machine out of operation before the waste receptacle overflows.

(C) Shutoff devices specified under Subparagraph (B)(2) of this section shall prevent water or liquid FOOD from continuously running if there is a failure of a flow control device in the water or liquid FOOD system or waste accumulation that could lead to overflow of the waste receptacle.

4-204.122 Case Lot Handling Equipment, Moveability.

EQUIPMENT, such as dollies, pallets, racks, and skids used to store and transport large quantities of PACKAGED FOODS received from a supplier in a cased or overwrapped lot, shall be designed to be moved by hand or by conveniently available EQUIPMENT such as hand trucks and forklifts.

4-204.123 Vending Machine Doors and Openings.

(A) VENDING MACHINE doors and access opening covers to FOOD and container storage spaces shall be tight-fitting so that the space along the entire interface between the doors or covers and the cabinet of the machine, if the doors or covers are in a closed position, is no greater than 1.5 millimeters or one-sixteenth inch by:

(1) Being covered with louvers, screens, or materials that provide an equivalent opening of not greater than 1.5 millimeters or one- sixteenth inch. Screening of 12 or more mesh to 2.5 centimeters (12 mesh to 1 inch) meets this requirement;

(2) Being effectively gasketed;

(3) Having interface surfaces that are at least 13 millimeters or one-half inch wide; or

(4) Jambs or surfaces used to form an L-shaped entry path to the interface.

91 (B) VENDING MACHINE service connection openings through an exterior wall of a machine shall be closed by sealants, clamps, or grommets so that the openings are no larger than 1.5 millimeters or one-sixteenth inch.

Acceptability 4-205.10 Food Equipment, Certification and Classification.

FOOD EQUIPMENT that is certified or classified for sanitation by an American National Standards Institute (ANSI)-accredited certification program will be deemed to comply with Parts 4-1 and 4-2 of this chapter.

4-3 NUMBERS AND CAPACITIES

Subparts

4-301 Equipment 4-302 Utensils, Temperature Measuring Devices, and Testing Devices

Equipment 4-301.11 Cooling, Heating, and Holding Capacities.

EQUIPMENT for cooling and heating FOOD, and holding cold and hot FOOD, shall be sufficient in number and capacity to provide FOOD temperatures as specified under Chapter 3.

4-301.12 Manual Warewashing, Sink Compartment Requirements.

(A) Except as specified in ¶ (C) of this section, a sink with at least 3 compartments shall be provided for manually washing, rinsing, and SANITIZING EQUIPMENT and UTENSILS.

(B) Sink compartments shall be large enough to accommodate immersion of the largest EQUIPMENT and UTENSILS. If EQUIPMENT or UTENSILS are too large for the WAREWASHING sink, a WAREWASHING machine or alternative EQUIPMENT as specified in ¶ (C) of this section

92 shall be used.

(C) Alternative manual WAREWASHING EQUIPMENT may be used when there are special cleaning needs or constraints and its use is APPROVED. Alternative manual WAREWASHING EQUIPMENT may include:

(1) High-pressure detergent sprayers;

(2) Low- or line-pressure spray detergent foamers;

(3) Other task-specific cleaning EQUIPMENT;

(4) Brushes or other implements;

(5) 2-compartment sinks as specified under ¶¶ (D) and (E) of this section; or

(6) Receptacles that substitute for the compartments of a multicompartment sink.

(D) Before a 2-compartment sink is used:

(1) The LICENSE HOLDER shall have its use APPROVED; and

(2) The nature of WAREWASHING shall be limited to batch operations for cleaning KITCHENWARE such as between cutting one type of raw MEAT and another or cleanup at the end of a shift, and:

(a) The number of items to be cleaned shall be limited,

(b) The cleaning and SANITIZING solutions shall be made up immediately before use and drained immediately after use, and

(c) A detergent-SANITIZER shall be used to SANITIZE and shall be applied as specified under § 4-501.115, or

(d) A hot water SANITIZATION immersion step shall be used as specified under ¶ 4-603.16(C).

(E) A 2-compartment sink may not be used for WAREWASHING operations where cleaning and SANITIZING solutions are used for a continuous or intermittent flow of KITCHENWARE or TABLEWARE in an ongoing WAREWASHING process.

93 4-301.13 Drainboards.

Drainboards, UTENSIL racks, or tables large enough to accommodate all soiled and cleaned items that may accumulate during hours of operation shall be provided for necessary UTENSIL holding before cleaning and after SANITIZING.

4-301.14 Ventilation Hood Systems, Adequacy.

Ventilation hood systems and devices shall be sufficient in number and capacity to prevent grease or condensation from collecting on walls and ceilings.

4-301.15 Clothes Washers and Dryers.

(A) Except as specified in ¶ (B) of this section, if work clothes or LINENS are laundered on the PREMISES, a mechanical clothes washer and dryer shall be provided and used.

(B) If on-PREMISES laundering is limited to wiping cloths intended to be used moist, or wiping cloths are air-dried as specified under § 4-901.12, a mechanical clothes washer and dryer need not be provided.

Utensils, 4-302.11 Utensils, Consumer Self-Service. Temperature Measuring A FOOD dispensing UTENSIL shall be available for each container Devices, and displayed at a CONSUMER self-service unit such as a buffet or salad Testing Devices bar.

4-302.12 Food Temperature Measuring Devices.

FOOD TEMPERATURE MEASURING DEVICES shall be provided and readily accessible for use in ensuring attainment and maintenance of FOOD temperatures as specified under Chapter 3.

4-302.13 Temperature Measuring Devices, Manual Warewashing.

In manual WAREWASHING operations, a TEMPERATURE MEASURING

94 DEVICE shall be provided and readily accessible for frequently measuring the washing and SANITIZING temperatures.

4-302.14 Sanitizing Solutions, Testing Devices.

A test kit or other device that accurately measures the concentration in mg/L of SANITIZING solutions shall be provided.

4-4 LOCATION AND INSTALLATION

Subparts

4-401 Location 4-402 Installation

Location 4-401.11 Equipment, Clothes Washers and Dryers, and Storage Cabinets, Contamination Prevention.

(A) Except as specified in ¶ (B) of this section, EQUIPMENT, a cabinet used for the storage of FOOD, or a cabinet that is used to store cleaned and SANITIZED EQUIPMENT, UTENSILS, laundered LINENS, and SINGLE- SERVICE and SINGLE-USE ARTICLES may not be located:

(1) In locker rooms;

(2) In toilet rooms;

(3) In garbage rooms;

(4) In mechanical rooms;

(5) Under sewer lines that are not shielded to intercept potential drips;

(6) Under leaking water lines including leaking automatic fire sprinkler heads or under lines on which water has condensed;

(7) Under open stairwells; or

(8) Under other sources of contamination.

(B) A storage cabinet used for LINENS or SINGLE-SERVICE or SINGLE-

95 USE ARTICLES may be stored in a locker room.

(C) If a mechanical clothes washer or dryer is provided, it shall be located so that the washer or dryer is protected from contamination and only where there is no exposed FOOD; clean EQUIPMENT, UTENSILS, and LINENS; and unwrapped SINGLE-SERVICE and SINGLE-USE ARTICLES.

Installation 4-402.11 Fixed Equipment, Spacing or Sealing.

(A) EQUIPMENT that is fixed because it is not EASILY MOVABLE shall be installed so that it is:

(1) Spaced to allow access for cleaning along the sides, behind, and above the EQUIPMENT;

(2) Spaced from adjoining EQUIPMENT, walls, and ceilings a distance of not more than 1 millimeter or one thirty-second inch; or

(3) SEALED to adjoining EQUIPMENT or walls, if the EQUIPMENT is exposed to spillage or seepage.

(B) TABLE-MOUNTED EQUIPMENT that is not EASILY MOVABLE shall be installed to allow cleaning of the EQUIPMENT and areas underneath and around the EQUIPMENT by being:

(1) SEALED to the table; or

(2) Elevated on legs as specified under ¶ 4-402.12(D).

4-402.12 Fixed Equipment, Elevation or Sealing.

(A) Except as specified in ¶¶ (B) and (C) of this section, floor-mounted EQUIPMENT that is not EASILY MOVABLE shall be SEALED to the floor or elevated on legs that provide at least a 15 centimeter (6 inch) clearance between the floor and the EQUIPMENT.

(B) If no part of the floor under the floor-mounted EQUIPMENT is more than 15 centimeters (6 inches) from the point of cleaning access, the clearance space may be only 10 centimeters (4 inches).

(C) This section does not apply to display shelving units, display refrigeration units, and display freezer units located in the CONSUMER shopping areas of a retail FOOD store, if the floor under the units is

96 maintained clean.

(D) Except as specified in ¶ (E) of this section, TABLE-MOUNTED EQUIPMENT that is not EASILY MOVABLE shall be elevated on legs that provide at least a 10 centimeter (4 inch) clearance between the table and the EQUIPMENT.

(E) The clearance space between the table and TABLE-MOUNTED EQUIPMENT may be:

(1) 7.5 centimeters (3 inches) if the horizontal distance of the table top under the EQUIPMENT is no more than 50 centimeters (20 inches) from the point of access for cleaning; or

(2) 5 centimeters (2 inches) if the horizontal distance of the table top under the EQUIPMENT is no more than 7.5 centimeters (3 inches) from the point of access for cleaning.

4-5 MAINTENANCE AND OPERATION

Subparts

4-501 Equipment 4-502 Utensils and Temperature and Pressure Measuring Devices

Equipment 4-501.11 Good Repair and Proper Adjustment.

(A) EQUIPMENT shall be maintained in a state of repair and condition that meets the requirements specified under Parts 4-1 and 4-2.

(B) EQUIPMENT components such as doors, seals, hinges, fasteners, and kick plates shall be kept intact, tight, and adjusted in accordance with manufacturer's specifications.

(C) Cutting or piercing parts of can openers shall be kept sharp to minimize the creation of metal fragments that can contaminate FOOD when the container is opened.

4-501.12 Cutting Surfaces.

97 Surfaces such as cutting blocks and boards that are subject to scratching and scoring shall be resurfaced if they can no longer be effectively cleaned and SANITIZED, or discarded if they are not capable of being resurfaced.

4-501.13 Microwave Ovens.

Microwave ovens shall meet the safety standards specified in 21 CFR 1030.10 Microwave ovens.

4-501.14 Warewashing Equipment, Cleaning Frequency.

A WAREWASHING machine; the compartments of sinks, basins, or other receptacles used for washing and rinsing EQUIPMENT, UTENSILS, or raw FOODS, or laundering wiping cloths; and drainboards or other EQUIPMENT used to substitute for drainboards as specified under § 4-301.13 shall be cleaned:

(A) Before use;

(B) Throughout the day at a frequency necessary to prevent recontamination of EQUIPMENT and UTENSILS and to ensure that the EQUIPMENT performs its intended function; and

(C) If used, at least every 24 hours.

4-501.15 Warewashing Machines, Manufacturers' Operating Instructions.

(A) A WAREWASHING machine and its auxiliary components shall be operated in accordance with the machine's data plate and other manufacturer's instructions.

(B) A WAREWASHING machine's conveyor speed or automatic cycle times shall be maintained accurately timed in accordance with manufacturer's specifications.

4-501.16 Warewashing Sinks, Use Limitation.

(A) A WAREWASHING sink may not be used for handwashing.

98 (B) If a WAREWASHING sink is used to wash wiping cloths, wash produce, or thaw FOOD, the sink shall be cleaned as specified under § 4-501.14 before and after each time it is used to wash wiping cloths or wash produce or thaw FOOD. Sinks used to wash or thaw FOOD shall be SANITIZED as specified under Part 4-7 before and after using the sink to wash produce or thaw FOOD.

4-501.17 Warewashing Equipment, Cleaning Agents.

When used for WAREWASHING, the wash compartment of a sink, mechanical warewasher, or wash receptacle of alternative manual WAREWASHING EQUIPMENT as specified in ¶ 4-301.12(C), shall contain a wash solution of soap, detergent, acid cleaner, alkaline cleaner, degreaser, abrasive cleaner, or other cleaning agent according to the cleaning agent manufacturer's label instructions.

4-501.18 Warewashing Equipment, Clean Solutions.

The wash, rinse, and SANITIZE solutions shall be maintained clean.

4-501.19 Manual Warewashing Equipment, Wash Solution Temperature.

The temperature of the wash solution in manual WAREWASHING EQUIPMENT shall be maintained at not less than 43oC (110oF) or the temperature specified on the cleaning agent manufacturer's label instructions.

4-501.110 Mechanical Warewashing Equipment, Wash Solution Temperature.

(A) The temperature of the wash solution in spray type warewashers that use hot water to SANITIZE may not be less than:

(1) For a stationary rack, single temperature machine, 74oC (165oF);

(2) For a stationary rack, dual temperature machine, 66oC (150oF);

(3) For a single tank, conveyor, dual temperature machine, 71oC (160oF); or

(4) For a multitank, conveyor, multitemperature machine, 66oC

99 (150oF).

(B) The temperature of the wash solution in spray-type warewashers that use chemicals to SANITIZE may not be less than 49oC (120oF). 4-501.111 Manual Warewashing Equipment, Hot Water Sanitization Temperatures.*

If immersion in hot water is used for SANITIZING in a manual operation, the temperature of the water shall be maintained at 77oC (171oF) or above.

4-501.112 Mechanical Warewashing Equipment, Hot Water Sanitization Temperatures.

(A) Except as specified in ¶ (B) of this section, in a mechanical operation, the temperature of the fresh hot water SANITIZING rinse as it enters the manifold may not be more than 90oC (194oF), or less than:

(1) For a stationary rack, single temperature machine, 74oC (165oF); or

(2) For all other machines, 82oC (180oF).

(B) The maximum temperature specified under ¶ (A) of this section, does not apply to the high pressure and temperature systems with wand-type, hand-held, spraying devices used for the in-place cleaning and SANITIZING of EQUIPMENT such as meat saws.

4-501.113 Mechanical Warewashing Equipment, Sanitization Pressure.

The flow pressure of the fresh hot water SANITIZING rinse in a WAREWASHING machine may not be less than 100 kilopascals (15 pounds per square inch) or more than 170 kilopascals (25 pounds per square inch) as measured in the water line immediately downstream or upstream from the fresh hot water SANITIZING rinse control valve.

4-501.114 Manual and Mechanical Warewashing Equipment, Chemical Sanitization - Temperature, pH, Concentration, and Hardness.*

A chemical SANITIZER used in a SANITIZING solution for a manual or

100 mechanical operation at exposure times specified under ¶ 4-703.11(C) shall be listed in 21 CFR 178.1010 Sanitizing solutions, shall be used in accordance with the EPA-approved manufacturer's label use instructions, and shall be used as follows:

(A) A chlorine solution shall have a minimum temperature based on the concentration and pH of the solution as listed in the following chart;

Minimum Minimum Temperature Concentration mg/L pH 10 or less pH 8 or less oC (oF) oC (oF) 25 49 (120) 49 (120) 50 38 (100) 24 ( 75) 100 13 ( 55) 13 ( 55)

(B) An iodine solution shall have a:

(1) Minimum temperature of 24oC (75oF),

(2) pH of 5.0 or less or a pH no higher than the level for which the manufacturer specifies the solution is effective, and

(3) Concentration between 12.5 mg/L and 25 mg/L;

(C) A quaternary ammonium compound solution shall:

(1) Have a minimum temperature of 24oC (75oF),

(2) Have a concentration as specified under § 7-204.11 and as indicated by the manufacturer's use directions included in the labeling, and

(3) Be used only in water with 500 mg/L hardness or less or in water having a hardness no greater than specified by the manufacturer's label;

(D) If another solution of a chemical specified under ¶¶ (A)-(C) of this section is used, the LICENSE HOLDER shall demonstrate to the REGULATORY AUTHORITY that the solution achieves SANITIZATION and the

101 use of the solution shall be APPROVED; or

(E) If a chemical SANITIZER other than chlorine, iodine, or a quaternary ammonium compound is used, it shall be applied in accordance with the manufacturer's use directions included in the labeling.

4-501.115 Manual Warewashing Equipment, Chemical Sanitization Using Detergent-Sanitizers.

If a detergent-SANITIZER is used to SANITIZE in a cleaning and SANITIZING procedure where there is no distinct water rinse between the washing and SANITIZING steps, the agent applied in the SANITIZING step shall be the same detergent-SANITIZER that is used in the washing step.

4-501.116 Warewashing Equipment, Determining Chemical Sanitizer Concentration.

Concentration of the SANITIZING solution shall be accurately determined by using a test kit or other device.

Utensils and 4-502.11 Good Repair and Calibration. Temperature and Pressure (A) UTENSILS shall be maintained in a state of repair or condition that Measuring complies with the requirements specified under Parts 4-1 and 4-2 or Devices shall be discarded.

(B) FOOD TEMPERATURE MEASURING DEVICES shall be calibrated in accordance with manufacturer's specifications as necessary to ensure their accuracy.

(C) Ambient air temperature, water pressure, and water TEMPERATURE MEASURING DEVICES shall be maintained in good repair and be accurate within the intended range of use.

4-502.12 Single-Service and Single-Use Articles, Required Use.*

A FOOD ESTABLISHMENT without facilities specified under Parts 4-6 and 4-7 for cleaning and SANITIZING kitchenware and TABLEWARE shall provide only SINGLE-USE KITCHENWARE, SINGLE-SERVICE ARTICLES, and SINGLE-USE ARTICLES for use by FOOD EMPLOYEES and SINGLE- SERVICE ARTICLES for use by CONSUMERS.

102 4-502.13 Single-Service and Single-Use Articles, Use Limitation.

(A) SINGLE-SERVICE and SINGLE-USE ARTICLES may not be reused.

(B) The bulk milk container dispensing tube shall be cut on the diagonal leaving no more than one inch protruding from the chilled dispensing head.

4-502.14 Shells, Use Limitation.

Mollusk and crustacea shells may not be used more than once as serving containers.

4-6 CLEANING OF EQUIPMENT AND UTENSILS

Subparts

4-601 Objective 4-602 Frequency 4-603 Methods

Objective 4-601.11 Equipment, Food-Contact Surfaces, Nonfood- Contact Surfaces, and Utensils.*

(A) EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be clean to sight and touch.

(B) The FOOD-CONTACT SURFACES of cooking EQUIPMENT and pans shall be kept free of encrusted grease deposits and other soil accumulations.N

(C) NonFOOD-CONTACT SURFACES of EQUIPMENT shall be kept free of an accumulation of dust, dirt, FOOD residue, and other debris.N

Frequency 4-602.11 Equipment Food-Contact Surfaces and Utensils.*

(A) EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be

103 cleaned:

(1) Except as specified in ¶ (B) of this section, before each use with a different type of raw animal FOOD such as beef, FISH, lamb, pork, or POULTRY;

(2) Each time there is a change from working with raw FOODS to working with READY-TO-EAT FOODS;

(3) Between uses with raw fruits and vegetables and with POTENTIALLY HAZARDOUS FOOD;

(4) Before using or storing a FOOD TEMPERATURE MEASURING DEVICE; and

(5) At any time during the operation when contamination may have occurred.

(B) Subparagraph (A)(1) of this section does not apply if the FOOD- CONTACT SURFACE or UTENSIL is in contact with a succession of different raw animal FOODS each requiring a higher cooking temperature as specified under § 3-401.11 than the previous FOOD, such as preparing raw FISH followed by cutting raw poultry on the same cutting board.

(C) Except as specified in ¶ (D) of this section, if used with POTENTIALLY HAZARDOUS FOOD, EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be cleaned throughout the day at least every 4 hours.

(D) Surfaces of UTENSILS and EQUIPMENT contacting POTENTIALLY HAZARDOUS FOOD may be cleaned less frequently than every 4 hours if:

(1) In storage, containers of POTENTIALLY HAZARDOUS FOOD and their contents are maintained at temperatures specified under Chapter 3 and the containers are cleaned when they are empty;

(2) UTENSILS and EQUIPMENT are used to prepare FOOD in a refrigerated room or area that is maintained at one of the temperatures in the following chart and:

(a) The UTENSILS and EQUIPMENT are cleaned at the frequency in the following chart that corresponds to the temperature:

104 Cleaning Temperature Frequency

5.0oC (41oF) or less 24 hours

>5.0oC - 7.2oC 20 hours (>41oF - 45oF)

>7.2oC - 10.0oC 16 hours (>45oF - 50oF)

>10.0oC - 12.8oC 10 hours (>50oF - 55oF)

; and

(b) The cleaning frequency based on the ambient temperature of the refrigerated room or area is documented in the FOOD ESTABLISHMENT.

(3) Containers in serving situations such as salad bars, delis, and lines hold READY-TO-EAT POTENTIALLY HAZARDOUS FOOD that is maintained at the temperatures specified under Chapter 3, are intermittently combined with additional supplies of the same FOOD that is at the required temperature, and the containers are cleaned at least every 24 hours;

(4) TEMPERATURE MEASURING DEVICES are maintained in contact with FOOD, such as when left in a container of deli FOOD or in a roast, held at temperatures specified under Chapter 3;

(5) EQUIPMENT is used for storage of PACKAGED or unPACKAGED FOOD such as a reach-in refrigerator and the EQUIPMENT is cleaned at a frequency necessary to preclude accumulation of soil residues;

(6) The cleaning schedule is APPROVED based on consideration of:

(a) Characteristics of the EQUIPMENT and its use,

(b) The type of FOOD involved,

105 (c) The amount of FOOD residue accumulation, and

(d) The temperature at which the FOOD is maintained during the operation and the potential for the rapid and progressive multiplication of pathogenic or toxigenic microorganisms that are capable of causing foodborne disease; or

(7) In-use UTENSILS are intermittently stored in a container of water in wh ich the water is maintained at 54oC (130oF) or more and the UTENSILS and container are cleaned at least every 24 hours or at a frequency necessary to preclude accumulation of soil residues.

(E) Except when dry cleaning methods are used as specified under § 4-603.11, surfaces of UTENSILS and EQUIPMENT contacting FOOD that is not POTENTIALLY HAZARDOUS shall be cleaned:N

(1) At any time when contamination may have occurred;

(2) At least every 24 hours for iced dispensers and CONSUMER self-service UTENSILS such as tongs, scoops, or ladles;

(3) Before restocking CONSUMER self-service EQUIPMENT and UTENSILS such as condiment dispensers and display containers; and

(4) In EQUIPMENT such as ice bins and BEVERAGE dispensing nozzles and enclosed components of EQUIPMENT such as ice makers, cooking oil storage tanks and distribution lines, BEVERAGE and syrup dispensing lines or tubes, grinders, and water vending EQUIPMENT:

(a) At a frequency specified by the manufacturer, or

(b) Absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold.

4-602.12 Cooking and Baking Equipment.

(A) The FOOD-CONTACT SURFACES of cooking and baking EQUIPMENT shall be cleaned at least every 24 hours. This section does not apply to hot oil cooking and filtering EQUIPMENT if it is cleaned as specified in Subparagraph 4-602.11(D)(6).

(B) The cavities and door seals of microwave ovens shall be cleaned

106 at least every 24 hours by using the manufacturer's recommended cleaning procedure.

4-602.13 Nonfood-Contact Surfaces.

NonFOOD-CONTACT SURFACES of EQUIPMENT shall be cleaned at a frequency necessary to preclude accumulation of soil residues.

Methods 4-603.11 Dry Cleaning.

(A) If used, dry cleaning methods such as brushing, scraping, and vacuuming shall contact only SURFACES that are soiled with dry FOOD residues that are not POTENTIALLY HAZARDOUS.

(B) Cleaning EQUIPMENT used in dry cleaning FOOD-CONTACT SURFACES may not be used for any other purpose.

4-603.12 Precleaning.

(A) FOOD debris on EQUIPMENT and UTENSILS shall be scrapped over a waste disposal unit, scupper, or garbage receptacle or shall be removed in a WAREWASHING machine with a prewash cycle.

(B) If necessary for effective cleaning, UTENSILS and EQUIPMENT shall be preflushed, presoaked, or scrubbed with abrasives.

4-603.13 Loading of Soiled Items, Warewashing Machines.

Soiled items to be cleaned in a WAREWASHING machine shall be loaded into racks, trays, or baskets or onto conveyors in a position that:

(A) Exposes the items to the unobstructed spray from all cycles; and

(B) Allows the items to drain.

4-603.14 Wet Cleaning.

(A) EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be effectively washed to remove or completely loosen soils by using the manual or mechanical means necessary such as the application of

107 detergents containing wetting agents and emulsifiers; acid, alkaline, or abrasive cleaners; hot water; brushes; scouring pads; high-pressure sprays; or ultrasonic devices.

(B) The washing procedures selected shall be based on the type and purpose of the EQUIPMENT or UTENSIL, and on the type of soil to be removed.

4-603.15 Washing, Procedures for Alternative Manual Warewashing Equipment.

If washing in sink compartments or a WAREWASHING machine is impractical such as when the EQUIPMENT is fixed or the UTENSILS are too large, washing shall be done by using alternative manual WAREWASHING EQUIPMENT as specified in ¶ 4-301.12(C) in accordance with the following procedures:

(A) EQUIPMENT shall be disassembled as necessary to allow access of the detergent solution to all parts;

(B) EQUIPMENT components and UTENSILS shall be scrapped or rough cleaned to remove FOOD particle accumulation; and

(C) EQUIPMENT and UTENSILS shall be washed as specified under ¶ 4-603.14(A).

4-603.16 Rinsing Procedures.

Washed UTENSILS and EQUIPMENT shall be rinsed so that abrasives are removed and cleaning chemicals are removed or diluted through the use of water or a detergent-SANITIZER solution by using one of the following procedures:

(A) Use of a distinct, separate water rinse after washing and before SANITIZING if using:

(1) A 3-compartment sink,

(2) Alternative manual WAREWASHING EQUIPMENT equivalent to a 3-compartment sink as specified in ¶ 4-301.12(C), or

(3) A 3-step washing, rinsing, and SANITIZING procedure in a WAREWASHING system for CIP EQUIPMENT;

108 (B) Use of a detergent-SANITIZER as specified under § 4-501.115 if using:

(1) Alternative WAREWASHING EQUIPMENT as specified in ¶ 4-301.12(C) that is APPROVED for use with a detergent- SANITIZER, or

(2) A WAREWASHING system for CIP EQUIPMENT;

(C) Use of a nondistinct water rinse that is integrated in the hot water SANITIZATION immersion step of a 2-compartment sink operation;

(D) If using a WAREWASHING machine that does not recycle the SANITIZING solution as specified under ¶ (E) of this section, or alternative manual WAREWASHING EQUIPMENT such as sprayers, use of a nondistinct water rinse that is:

(1) Integrated in the application of the SANITIZING solution, and

(2) Wasted immediately after each application; or

(E) If using a WAREWASHING machine that recycles the SANITIZING solution for use in the next wash cycle, use of a nondistinct water rinse that is integrated in the application of the SANITIZING solution.

4-603.17 Returnables, Cleaning for Refilling.*

(A) Except as specified in ¶¶ (B) and (C) of this section, returned empty containers intended for cleaning and refilling with FOOD shall be cleaned and refilled in a regulated FOOD PROCESSING PLANT.

(B) A FOOD-specific container for BEVERAGES may be refilled at a FOOD ESTABLISHMENT if:

(1) Only a BEVERAGE that is not a POTENTIALLY HAZARDOUS FOOD is used as specified under ¶ 3-304.17(A);

(2) The design of the container and of the rinsing EQUIPMENT and the nature of the BEVERAGE, when considered together, allow effective cleaning at home or in the FOOD ESTABLISHMENT;

109 (3) Facilities for rinsing before refilling returned containers with fresh, hot water that is under pressure and not recirculated are provided as part of the dispensing system;

(4) The CONSUMER-owned container returned to the FOOD ESTABLISHMENT for refilling is refilled for sale or service only to the same CONSUMER; and

(5) The container is refilled by:

(a) An EMPLOYEE of the FOOD ESTABLISHMENT, or

(b) The owner of the container if the BEVERAGE system includes a contamination-free transfer process that can not be bypassed by the container owner.

(C) CONSUMER-owned containers that are not FOOD-specific may be filled at a water VENDING MACHINE or system.

4-7 SANITIZATION OF EQUIPMENT AND UTENSILS

Subparts

4-701 Objective 4-702 Frequency 4-703 Methods

Objective 4-701.10 Food-Contact Surfaces and Utensils.

EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be SANITIZED.

Frequency 4-702.11 Before Use After Cleaning.*

UTENSILS and FOOD-CONTACT SURFACES of EQUIPMENT shall be SANITIZED before use after cleaning.

110 Methods 4-703.11 Hot Water and Chemical.*

After being cleaned, EQUIPMENT FOOD-CONTACT SURFACES and UTENSILS shall be SANITIZED in:

(A) Hot water manual operations by immersion for at least 30 seconds and as specified under § 4-501.111;

(B) Hot water mechanical operations by being cycled through EQUIPMENT that is set up as specified under §§ 4-501.15, 4-501.112, and 4-501.113 and achieving a UTENSIL surface temperature of 71oC (160oF) as measured by an irreversible registering temperature indicator; or

(C) Chemical manual or mechanical operations, including the application of SANITIZING chemicals by immersion, manual swabbing, brushing, or pressure spraying methods, using a solution as specified under § 4-501.114 by providing:

(1) Except as specified under Subparagraph (C)(2) of this section, an exposure time of at least 10 seconds for a chlorine solution specified under ¶ 4-501.114(A),

(2) An exposure time of at least 7 seconds for a chlorine solution of 50 mg/L that has a pH of 10 or less and a temperature of at least 38oC (100oF) or a pH of 8 or less and a temperature of at least 24oC (75oF),

(3) An exposure time of at least 30 seconds for other chemical SANITIZING solutions, or

(4) An exposure time used in relationship with a combination of temperature, concentration, and pH that, when evaluated for efficacy, yields SANITIZATION as defined in Subparagraph 1-201.10(B)(70).

111 4-8 LAUNDERING

Subparts

4-801 Objective 4-802 Frequency 4-803 Methods

Objective 4-801.11 Clean Linens.

Clean LINENS shall be free from FOOD residues and other soiling matter.

Frequency 4-802.11 Specifications.

(A) LINENS that do not come in direct contact with FOOD shall be laundered between operations if they become wet, sticky, or visibly soiled.

(B) Cloth gloves used as specified in ¶ 3-304.15(D) shall be laundered before being used with a different type of raw animal FOOD such as beef, lamb, pork, and FISH.

(C) LINENS and napkins that are used as specified under § 3-304.13 and cloth napkins shall be laundered between each use.

(D) Wet wiping cloths shall be laundered daily.

(E) Dry wiping cloths shall be laundered as necessary to prevent contamination of FOOD and clean serving UTENSILS.

Methods 4-803.11 Storage of Soiled Linens.

Soiled LINENS shall be kept in clean, nonabsorbent receptacles or clean, washable laundry bags and stored and transported to prevent contamination of FOOD, clean EQUIPMENT, clean UTENSILS, and SINGLE- SERVICE and SINGLE-USE ARTICLES.

112 4-803.12 Mechanical Washing.

(A) Except as specified in ¶ (B) of this section, LINENS shall be mechanically washed.

(B) In FOOD ESTABLISHMENTS in which only wiping cloths are laundered as specified in ¶ 4-301.15(B), the wiping cloths may be laundered in a mechanical washer, sink designated only for laundering wiping cloths, or a WAREWASHING or FOOD preparation sink that is cleaned as specified under § 4-501.14.

4-803.13 Use of Laundry Facilities.

(A) Except as specified in ¶ (B) of this section, laundry facilities on the PREMISES of a FOOD ESTABLISHMENT shall be used only for the washing and drying of items used in the operation of the establishment.

(B) Separate laundry facilities located on the PREMISES for the purpose of general laundering such as for institutions providing boarding and lodging may also be used for laundering FOOD ESTABLISHMENT items.

4-9 PROTECTION OF CLEAN ITEMS

Subparts

4-901 Drying 4-902 Lubricating and Reassembling 4-903 Storing 4-904 Handling

Drying 4-901.11 Equipment and Utensils, Air-Drying Required.

After cleaning and SANITIZING, EQUIPMENT and UTENSILS:

(A) Shall be air-dried or used after adequate draining as specified in ¶ (a) of 21 CFR 178.1010 Sanitizing solutions, before contact with FOOD; and

113 (B) May not be cloth dried except that UTENSILS that have been air-dried may be polished with cloths that are maintained clean and dry.

4-901.12 Wiping Cloths, Air-Drying Locations.

Wiping cloths laundered in a FOOD ESTABLISHMENT that does not have a mechanical clothes dryer as specified in ¶ 4-301.15(B) shall be air- dried in a location and in a manner that prevents contamination of FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLE-SERVICE and SINGLE- USE ARTICLES and the wiping cloths. This section does not apply if wiping cloths are stored after laundering in a sanitizing solution as specified under § 4-501.114.

Lubricating and 4-902.11 Food-Contact Surfaces. Reassembling Lubricants shall be applied to FOOD-CONTACT SURFACES that require lubrication in a manner that does not contaminate FOOD-CONTACT SURFACES.

4-902.12 Equipment.

EQUIPMENT shall be reassembled so that FOOD-CONTACT SURFACES are not contaminated.

Storing 4-903.11 Equipment, Utensils, Linens, and Single-Service and Single-Use Articles.

(A) Except as specified in ¶ (D) of this section, cleaned EQUIPMENT and UTENSILS, laundered LINENS, and SINGLE-SERVICE and SINGLE-USE ARTICLES shall be stored:

(1) In a clean, dry location;

(2) Where they are not exposed to splash, dust, or other contamination; and

(3) At least 15 cm (6 inches) above the floor.

(B) Clean EQUIPMENT and UTENSILS shall be stored as specified under ¶ (A) of this section and shall be stored:

114 (1) In a self-draining position that allows air drying; and

(2) Covered or inverted.

(C) SINGLE-SERVICE and SINGLE-USE ARTICLES shall be stored as specified under ¶ (A) of this section and shall be kept in the original protective package or stored by using other means that afford protection from contamination until used.

(D) Items that are kept in closed packages may be stored less than 15 cm (6 inches) above the floor on dollies, pallets, racks, and skids that are designed as specified under § 4-204.122.

4-903.12 Prohibitions.

(A) Except as specified in ¶ (B) of this section, cleaned and SANITIZED EQUIPMENT, UTENSILS, laundered LINENS, and SINGLE-SERVICE and SINGLE-USE ARTICLES may not be stored:

(1) In locker rooms;

(2) In toilet rooms;

(3) In garbage rooms;

(4) In mechanical rooms;

(5) Under sewer lines that are not shielded to intercept potential drips;

(6) Under leaking water lines including leaking automatic fire sprinkler heads or under lines on which water has condensed;

(7) Under open stairwells; or

(8) Under other sources of contamination.

(B) Laundered LINENS and SINGLE-SERVICE and SINGLE-USE ARTICLES that are PACKAGED or in a facility such as a cabinet may be stored in a locker room.

115 Handling 4-904.11 Kitchenware and Tableware.

(A) SINGLE-SERVICE and SINGLE-USE ARTICLES and cleaned and SANITIZED UTENSILS shall be handled, displayed, and dispensed so that contamination of FOOD- and lip-contact surfaces is prevented.

(B) Knives, forks, and spoons that are not prewrapped shall be presented so that only the handles are touched by EMPLOYEES and by CONSUMERS if CONSUMER self-service is provided.

(C) Except as specified under ¶ (B) of this section, SINGLE-SERVICE ARTICLES that are intended for FOOD- or lip-contact shall be furnished for CONSUMER self-service with the original individual wrapper intact or from an APPROVED dispenser.

4-904.12 Soiled and Clean Tableware.

Soiled TABLEWARE shall be removed from CONSUMER eating and drinking areas and handled so that clean TABLEWARE is not contaminated.

4-904.13 Preset Tableware.

IF TABLEWARE is preset:

(A) It shall be protected from contamination by being wrapped, covered, or inverted;

(B) Exposed, unused settings shall be removed when a CONSUMER is seated; or

(C) Exposed, unused settings shall be cleaned and SANITIZED before further use if the settings are not removed when a CONSUMER is seated.

116 Chapter

5 Water, Plumbing, and Waste

Parts

5-1 WATER 5-2 PLUMBING SYSTEM 5-3 MOBILE WATER TANK AND MOBILE FOOD ESTABLISHMENT WATER

TANK 5-4 SEWAGE, OTHER LIQUID WASTE, AND RAINWATER 5-5 REFUSE, RECYCLABLES, AND RETURNABLES

5-1 WATER

Subparts

5-101 Source 5-102 Quality 5-103 Quantity and Availability 5-104 Distribution, Delivery, and Retention

Source 5-101.11 Approved System.*

DRINKING WATER shall be obtained from an APPROVED source that is:

(A) A PUBLIC WATER SYSTEM; or

(B) A nonPUBLIC WATER SYSTEM that is constructed, maintained, and operated according to LAW.

5-101.12 System Flushing and Disinfection.*

A DRINKING WATER system shall be flushed and disinfected before being placed in service after construction, repair, or modification and

117 after an emergency situation, such as a flood, that may introduce contaminants to the system.

5-101.13 Bottled Drinking Water.*

BOTTLED DRINKING WATER used or sold in a FOOD ESTABLISHMENT shall be obtained from APPROVED sources in accordance with 21 CFR Part 129 - Processing and Bottling of Bottled Drinking Water (1989).

Quality 5-102.11 Standards.*

Except as specified under § 5-102.12:

(A) Water from a PUBLIC WATER SYSTEM shall meet 40 CFR 141 - National Primary Drinking Water Regulations and state DRINKING WATER quality standards; and

(B) Water from a nonPUBLIC WATER SYSTEM shall meet state DRINKING WATER quality standards.

5-102.12 Nondrinking Water.*

(A) A nonDRINKING WATER supply shall be used only if its use is APPROVED.

(B) NonDRINKING WATER shall be used only for nonculinary purposes such as air conditioning, nonFOOD EQUIPMENT cooling, fire protection, and irrigation.

5-102.13 Sampling.

Except when used as specified under § 5-102.12, water from a nonPUBLIC WATER SYSTEM shall be sampled and tested at least annually and as required by state water quality regulations.

118 5-102.14 Sample Report.

The most recent sample report for the nonPUBLIC WATER SYSTEM shall be retained on file in the FOOD ESTABLISHMENT or the report shall be maintained as specified by state water quality regulations.

Quantity and 5-103.11 Capacity.* Availability (A) The water source and system shall be of sufficient capacity to meet the demands of the FOOD ESTABLISHMENT.

(B) Hot water generation and distribution systems shall be sufficient to meet the peak hot water demands throughout the FOOD ESTABLISHMENT.

5-103.12 Pressure.

Water under pressure shall be provided to all fixtures, EQUIPMENT, and nonFOOD EQUIPMENT that are required to use water except that water supplied as specified under ¶¶ 5-104.12(A) and (B) to a TEMPORARY FOOD ESTABLISHMENT or in response to a temporary interruption of a water supply need not be under pressure.

Distribution, 5-104.11 System. Delivery, and Retention Water shall be received from the source through the use of:

(A) An APPROVED public water main; or

(B) One or more of the following that shall be constructed, maintained, and operated according to LAW:

(1) Nonpublic water main, water pumps, pipes, hoses, connections, and other appurtenances,

(2) Water transport vehicles, and

(3) Water containers.

5-104.12 Alternative Water Supply.

119 Water meeting the requirements specified under Subparts 5-101, 5-102, and 5-103 shall be made available for a mobile facility, for a TEMPORARY FOOD ESTABLISHMENT without a permanent water supply, and for a FOOD ESTABLISHMENT with a temporary interruption of its water supply through:

(A) A supply of containers of commercially BOTTLED DRINKING WATER;

(B) One or more closed portable water containers;

(C) An enclosed vehicular water tank;

(D) An on-PREMISES water storage tank; or

(E) Piping, tubing, or hoses connected to an adjacent APPROVED source.

5-2 PLUMBING SYSTEM

Subparts

5-201 Materials 5-202 Design, Construction, and Installation 5-203 Numbers and Capacities 5-204 Location and Placement 5-205 Operation and Maintenance

Materials 5-201.11 Approved.*

(A) A PLUMBING SYSTEM and hoses conveying water shall be constructed and repaired with APPROVED materials according to LAW.

(B) A water filter shall be made of SAFE MATERIALS.

Design, 5-202.11 Approved System and Cleanable Fixtures.*

120 Construction, (A) A PLUMBING SYSTEM shall be designed, constructed, and installed and Installation according to LAW.

(B) A PLUMBING FIXTURE such as a handwashing facility, toilet, or urinal shall be EASILY CLEANABLE.N

5-202.12 Handwashing Facility, Installation.

(A) A handwashing lavatory shall be equipped to provide water at a temperature of at least 43oC (110oF) through a mixing valve or combination faucet.

(B) A steam mixing valve may not be used at a handwashing lavatory.

(C) A self-closing, slow-closing, or metering faucet shall provide a flow of water for at least 15 seconds without the need to reactivate the faucet.

(D) An automatic handwashing facility shall be installed in accordance with manufacturer’s instructions.

5-202.13 Backflow Prevention, Air Gap.*

An air gap between the water supply inlet and the flood level rim of the PLUMBING FIXTURE, EQUIPMENT, or non-FOOD EQUIPMENT shall be at least twice the diameter of the water supply inlet and may not be less than 25 mm (1 inch).

5-202.14 Backflow Prevention Device, Design Standard.

A backflow or backsiphonage prevention device installed on a water supply system shall meet American Society of Sanitary Engineering (A.S.S.E.) standards for construction, installation, maintenance, inspection, and testing for that specific application and type of device.

5-202.15 Conditioning Device, Design.

A water filter, screen, and other water conditioning device installed on

121 water lines shall be designed to facilitate disassembly for periodic servicing and cleaning. A water filter element shall be of the replaceable type.

Numbers and 5-203.11 Handwashing Facilities.* Capacities (A) Except as specified in ¶¶ (B) and (C) of this section, at least 1 handwashing lavatory, a number of handwashing lavatories necessary for their convenient use by EMPLOYEES in areas specified under § 5-204.11, and not fewer than the number of handwashing lavatories required by LAW shall be provided.

(B) If APPROVED and capable of removing the types of soils encountered in the FOOD operations involved, automatic handwashing facilities may be substituted for handwashing lavatories in a FOOD ESTABLISHMENT that has at least one handwashing lavatory.

(C) If APPROVED, when FOOD exposure is limited and handwashing lavatories are not conveniently available, such as in some mobile or TEMPORARY FOOD ESTABLISHMENTS or at some VENDING MACHINE LOCATIONS, EMPLOYEES may use chemically treated towelettes for handwashing.

5-203.12 Toilets and Urinals.*

At least 1 toilet and not fewer than the toilets required by LAW shall be provided. If authorized by LAW and urinals are substituted for toilets, the substitution shall be done as specified in LAW.

5-203.13 Service Sink.

At least 1 service sink or 1 curbed cleaning facility equipped with a floor drain shall be provided and conveniently located for the cleaning of mops or similar wet floor cleaning tools and for the disposal of mop water and similar liquid waste.

5-203.14 Backflow Prevention Device, When Required.*

A PLUMBING SYSTEM shall be installed to preclude backflow of a solid,

122 liquid, or gas contaminant into the water supply system at each point of use at the FOOD ESTABLISHMENT, including on a hose bibb if a hose is attached or on a hose bibb if a hose is not attached and backflow prevention is required by LAW, by:

(A) Providing an air gap as specified under § 5-202.13; or

(B) Installing an APPROVED backflow prevention device as specified under § 5-202.14.

5-203.15 Backflow Prevention Device, Carbonator.*

Reserved.

Location and 5-204.11 Handwashing Facilities.* Placement A handwashing facility shall be located:

(A) To allow convenient use by EMPLOYEES in FOOD preparation, FOOD dispensing, and WAREWASHING areas; and

(B) In, or immediately adjacent to, toilet rooms.

5-204.12 Backflow Prevention Device, Location.

A backflow prevention device shall be located so that it may be serviced and maintained.

5-204.13 Conditioning Device, Location.

A water filter, screen, and other water conditioning device installed on water lines shall be located to facilitate disassembly for periodic servicing and cleaning.

Operation and 5-205.11 Using a Handwashing Facility. Maintenance (A) A handwashing facility shall be maintained so that it is accessible at all times for EMPLOYEE use.

(B) A handwashing facility may not be used for purposes other than handwashing.

123 (C) An automatic handwashing facility shall be used in accordance with manufacturer’s instructions.

5-205.12 Prohibiting a Cross Connection.*

(A) Except as specified in 9 CFR 308.3(d) for firefighting, a PERSON may not create a cross connection by connecting a pipe or conduit between the DRINKING WATER system and a nonDRINKING WATER SYSTEM or a water system of unknown quality.

(B) The piping of a nonDRINKING WATER SYSTEM shall be durably identified so that it is readily distinguishable from piping that carries DRINKING WATER.N

5-205.13 Scheduling Inspection and Service for a Water System Device.

A device such as a water treatment device or backflow preventer shall be scheduled for inspection and service, in accordance with manufacturer's instructions and as necessary to prevent device failure based on local water conditions, and records demonstrating inspection and service shall be maintained by the PERSON IN CHARGE.

5-205.14 Water Reservoir of Fogging Devices, Cleaning.*

(A) A reservoir that is used to supply water to a device such as a produce fogger shall be:

(1) Maintained in accordance with manufacturer's specifications; and

(2) Cleaned in accordance with manufacturer's specifications or according to the procedures specified under ¶ (B) of this section, whichever is more stringent.

(B) Cleaning procedures shall include at least the following steps and shall be conducted at least once a week:

(1) Draining and complete disassembly of the water and aerosol contact parts;

124 (2) Brush-cleaning the reservoir, aerosol tubing, and discharge nozzles with a suitable detergent solution;

(3) Flushing the complete system with water to remove the detergent solution and particulate accumulation; and

(4) Rinsing by immersing, spraying, or swabbing the reservoir, aerosol tubing, and discharge nozzles with at least 50 mg/L hypochlorite solution.

5-205.15 System Maintained in Good Repair.*

A PLUMBING SYSTEM shall be:

(A) Repaired according to LAW; and

(B) Maintained in good repair.S

5-3 MOBILE WATER TANK AND MOBILE FOOD ESTABLISHMENT WATER TANK

Subparts

5-301 Materials 5-302 Design and Construction 5-303 Numbers and Capacities 5-304 Operation and Maintenance

Materials 5-301.11 Approved.

Materials that are used in the construction of a mobile water tank, mobile FOOD ESTABLISHMENT water tank, and appurtenances shall be:

(A) Safe;

(B) Durable, CORROSION-RESISTANT, and nonabsorbent; and

(C) Finished to have a SMOOTH, EASILY CLEANABLE surface.

125 Design and 5-302.11 Enclosed System, Sloped to Drain. Construction A mobile water tank shall be:

(A) Enclosed from the filling inlet to the discharge outlet; and

(B) Sloped to an outlet that allows complete drainage of the tank.

5-302.12 Inspection and Cleaning Port, Protected and Secured.

If a water tank is designed with an access port for inspection and cleaning, the opening shall be in the top of the tank and:

(A) Flanged upward at least 13 mm (one-half inch); and

(B) Equipped with a port cover assembly that is:

(1) Provided with a gasket and a device for securing the cover in place, and

(2) Flanged to overlap the opening and sloped to drain.

5-302.13 "V" Type Threads, Use Limitation.

A fitting with "V" type threads on a water tank inlet or outlet shall be allowed only when a hose is permanently attached.

5-302.14 Tank Vent, Protected.

If provided, a water tank vent shall terminate in a downward direction and shall be covered with:

(A) 16 mesh to 25.4 mm (16 mesh to 1 inch) screen or equivalent when the vent is in a protected area; or

(B) A protective filter when the vent is in an area that is not protected from windblown dirt and debris.

5-302.15 Inlet and Outlet, Sloped to Drain.

126 (A) A water tank and its inlet and outlet shall be sloped to drain.

(B) A water tank inlet shall be positioned so that it is protected from contaminants such as waste discharge, road dust, oil, or grease.

5-302.16 Hose, Construction and Identification.

A hose used for conveying DRINKING WATER from a water tank shall be:

(A) Safe;

(B) Durable, CORROSION-RESISTANT, and nonaborbent;

(C) Resistant to pitting, chipping, crazing, scratching, scoring, distortion, and decomposition;

(D) Finished with a SMOOTH interior surface; and

(E) Clearly and durably identified as to its use if not permanently attached.

Numbers and 5-303.11 Filter, Compressed Air. Capacities A filter that does not pass oil or oil vapors shall be installed in the air supply line between the compressor and DRINKING WATER system when compressed air is used to pressurize the water tank system.

5-303.12 Protective Cover or Device.

A cap and keeper chain, closed cabinet, closed storage tube, or other APPROVED protective cover or device shall be provided for a water inlet, outlet, and hose.

5-303.13 Mobile Food Establishment Tank Inlet.

A mobile FOOD ESTABLISHMENT'S water tank inlet shall be:

(A) 19.1 mm (three-fourths inch) in inner diameter or less; and

(B) Provided with a hose connection of a size or type that will prevent its use for any other service.

127 Operation and 5-304.11 System Flushing and Disinfection.* Maintenance A water tank, pump, and hoses shall be flushed and sanitized before being placed in service after construction, repair, modification, and periods of nonuse.

5-304.12 Using a Pump and Hoses, Backflow Prevention.

A PERSON shall operate a water tank, pump, and hoses so that backflow and other contamination of the water supply are prevented.

5-304.13 Protecting Inlet, Outlet, and Hose Fitting.

If not in use, a water tank and hose inlet and outlet fitting shall be protected using a cover or device as specified under § 5-303.12.

5-304.14 Tank, Pump, and Hoses, Dedication.

(A) Except as specified in ¶ (B) of this section, a water tank, pump, and hoses used for conveying DRINKING WATER shall be used for no other purpose.

(B) Water tanks, pumps, and hoses APPROVED for liquid FOODS may be used for conveying DRINKING WATER if they are cleaned and SANITIZED before they are used to convey water.

128 5-4 SEWAGE, OTHER LIQUID WASTE, AND RAINWATER

Subparts

5-401 Mobile Holding Tank 5-402 Retention, Drainage, and Delivery 5-403 Disposal Facility

Mobile Holding 5-401.11 Capacity and Drainage. Tank A SEWAGE holding tank in a mobile FOOD ESTABLISHMENT shall be:

(A) Sized 15 percent larger in capacity than the water supply tank; and

(B) Sloped to a drain that is 25 mm (1 inch) in inner diameter or greater, equipped with a shut-off valve.

Retention, 5-402.10 Establishment Drainage System. Drainage, and Delivery FOOD ESTABLISHMENT drainage systems, including grease traps, that convey SEWAGE shall be designed and installed as specified under design, ¶ 5-202.11(A). construction, and installation 5-402.11 Backflow Prevention.*

(A) Except as specified in ¶¶ (B) and (C) of this section, a direct connection may not exist between the SEWAGE system and a drain originating from EQUIPMENT in which FOOD, portable EQUIPMENT, or UTENSILS are placed.

(B) If allowed by LAW, a WAREWASHING machine may have a direct connection between its waste outlet and a floor drain when the machine is located within 1.5 m (5 feet) of a trapped floor drain and the machine outlet is connected to the inlet side of a properly vented floor drain trap.

(C) If allowed by LAW, a WAREWASHING or culinary sink may have a direct connection.

129 location and 5-402.12 Grease Trap. placement If used, a grease trap shall be located to be easily accessible for cleaning. operation and 5-402.13 Conveying Sewage.* maintenance SEWAGE shall be conveyed to the point of disposal through an APPROVED sanitary SEWAGE system or other system, including use of SEWAGE transport vehicles, waste retention tanks, pumps, pipes, hoses, and connections that are constructed, maintained, and operated according to LAW.

5-402.14 Removing Mobile Food Establishment Wastes.

SEWAGE and other liquid wastes shall be removed from a mobile FOOD ESTABLISHMENT at an APPROVED waste SERVICING AREA or by a SEWAGE transport vehicle in such a way that a public health HAZARD or nuisance is not created.

5-402.15 Flushing a Waste Retention Tank.

A tank for liquid waste retention shall be thoroughly flushed and drained in a sanitary manner during the servicing operation.

Disposal Facility 5-403.11 Approved Sewage Disposal System.* design and SEWAGE shall be disposed through an APPROVED facility that is: construction (A) A public SEWAGE treatment plant; or

(B) An individual SEWAGE disposal system that is sized, constructed, maintained, and operated according to LAW.

5-403.12 Other Liquid Wastes and Rainwater.

Condensate drainage and other nonSEWAGE liquids and rainwater shall be drained from point of discharge to disposal according to LAW.

130 5-5 REFUSE, RECYCLABLES, AND RETURNABLES

Subparts

5-501 Facilities on the Premises 5-502 Removal 5-503 Facilities for Disposal and Recycling

Facilities on the 5-501.10 Indoor Storage Area. Premises materials, If located within the FOOD ESTABLISHMENT, a storage area for REFUSE, design, recyclables, and returnables shall meet the requirements specified construction, and under §§ 6-101.11, 6-201.11 - 6-201.18, 6-202.15, and 6-202.16. installation

5-501.11 Outdoor Storage Surface.

An outdoor storage surface for REFUSE, recyclables, and returnables shall be constructed of nonabsorbent material such as concrete or asphalt and shall be SMOOTH, durable, and sloped to drain.

5-501.12 Outdoor Enclosure.

If used, an outdoor enclosure for REFUSE, recyclables, and returnables shall be constructed of durable and cleanable materials.

5-501.13 Receptacles.

(A) Except as specified in ¶ (B) of this section, receptacles and waste handling units for REFUSE, recyclables, and returnables and for use with materials containing FOOD residue shall be durable, cleanable, insect- and rodent-resistant, leakproof, and nonabsorbent.

(B) Plastic bags and wet strength paper bags may be used to line receptacles for storage inside the FOOD ESTABLISHMENT, or within closed outside receptacles.

5-501.14 Receptacles in Vending Machines.

131 A REFUSE receptacle may not be located within a VENDING MACHINE, except that a receptacle for BEVERAGE bottle crown closures may be located within a VENDING MACHINE.

5-501.15 Outside Receptacles.

(A) Receptacles and waste handling units for REFUSE, recyclables, and returnables used with materials containing FOOD residue and used outside the FOOD ESTABLISHMENT shall be designed and constructed to have tight-fitting lids, doors, or covers.

(B) Receptacles and waste handling units for REFUSE and recyclables such as an on-site compactor shall be installed so that accumulation of debris and insect and rodent attraction and harborage are minimized and effective cleaning is facilitated around and, if the unit is not installed flush with the base pad, under the unit. numbers and 5-501.16 Storage Areas, Rooms, and Receptacles, Capacity capacities and Availability.

(A) An inside storage room and area and outside storage area and enclosure, and receptacles shall be of sufficient capacity to hold REFUSE, recyclables, and returnables that accumulate.

(B) A receptacle shall be provided in each area of the FOOD ESTABLISHMENT or PREMISES where REFUSE is generated or commonly discarded, or where recyclables or returnables are placed.

(C) If disposable towels are used at handwashing lavatories, a waste receptacle shall be located at each lavatory or group of adjacent lavatories.

5-501.17 Toilet Room Receptacle, Covered.

A toilet room used by females shall be provided with a covered receptacle for sanitary napkins.

5-501.18 Cleaning Implements and Supplies.

(A) Except as specified in ¶ (B) of this section, suitable cleaning

132 implements and supplies such as high pressure pumps, hot water, steam, and detergent shall be provided as necessary for effective cleaning of receptacles and waste handling units for REFUSE, recyclables, and returnables.

(B) If APPROVED, off-PREMISES-based cleaning services may be used if on-PREMISES cleaning implements and supplies are not provided. location and 5-501.19 Storage Areas, Redeeming Machines, Receptacles placement and Waste Handling Units, Location. (A) An area designated for REFUSE, recyclables, returnables, and, except as specified in ¶ (B) of this section, a redeeming machine for recyclables or returnables shall be located so that it is separate from FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLE-SERVICE and SINGLE- USE ARTICLES and a public health HAZARD or nuisance is not created.

(B) A redeeming machine may be located in the PACKAGED FOOD storage area or CONSUMER area of a FOOD ESTABLISHMENT if FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLE-SERVICE and SINGLE-USE ARTICLES are not subject to contamination from the machines and a public health HAZARD or nuisance is not created.

(C) The location of receptacles and waste handling units for REFUSE, recyclables, and returnables may not create a public health HAZARD or nuisance or interfere with the cleaning of adjacent space. operation and 5-501.110 Storing Refuse, Recyclables, and Returnables. maintenance REFUSE, recyclables, and returnables shall be stored in receptacles or waste handling units so that they are inaccessible to insects and rodents.

5-501.111 Areas, Enclosures, and Receptacles, Good Repair.

Storage areas, enclosures, and receptacles for REFUSE, recyclables, and returnables shall be maintained in good repair.

5-501.112 Outside Storage Prohibitions.

(A) Except as specified in ¶ (B) of this section, REFUSE receptacles

133 not meeting the requirements specified under ¶ 5-501.13(A) such as receptacles that are not rodent-resistant, unprotected plastic bags and paper bags, or baled units that contain materials with FOOD residue may not be stored outside.

(B) Cardboard or other packaging material that does not contain FOOD residues and that is awaiting regularly scheduled delivery to a recycling or disposal site may be stored outside without being in a covered receptacle if it is stored so that it does not create a rodent harborage problem.

5-501.113 Covering Receptacles.

Receptacles and waste handling units for REFUSE, recyclables, and returnables shall be kept covered:

(A) Inside the FOOD ESTABLISHMENT if the receptacles and units:

(1) Contain FOOD residue and are not in continuous use; or

(2) After they are filled; and

(B) With tight-fitting lids or doors if kept outside the FOOD ESTABLISHMENT.

5-501.114 Using Drain Plugs.

Drains in receptacles and waste handling units for REFUSE, recyclables, and returnables shall have drain plugs in place.

5-501.115 Maintaining Refuse Areas and Enclosures.

A storage area and enclosure for REFUSE, recyclables, or returnables shall be maintained free of unnecessary items, as specified under § 6-501.114, and clean.

5-501.116 Cleaning Receptacles.

(A) Receptacles and waste handling units for REFUSE, recyclables, and returnables shall be thoroughly cleaned in a way that does not

134 contaminate FOOD, EQUIPMENT, UTENSILS, LINENS, or SINGLE-SERVICE and SINGLE-USE ARTICLES, and waste water shall be disposed of as specified under §§ 5-402.13 and 5-403.11.

(B) Soiled receptacles and waste handling units for REFUSE, recyclables, and returnables shall be cleaned at a frequency necessary to prevent them from developing a buildup of soil or becoming attractants for insects and rodents.

Removal 5-502.11 Frequency.

REFUSE, recyclables, and returnables shall be removed from the PREMISES at a frequency that will minimize the development of objectionable odors and other conditions that attract or harbor insects and rodents.

5-502.12 Receptacles or Vehicles.

REFUSE, recyclables, and returnables shall be removed from the PREMISES by way of:

(A) Portable receptacles that are constructed and maintained according to LAW; or

(B) A transport vehicle that is constructed, maintained, and operated according to LAW.

Facilities for 5-503.11 Community or Individual Facility. Disposal and Recycling Solid waste not disposed of through the SEWAGE system such as through grinders and pulpers shall be recycled or disposed of in an APPROVED public or private community recycling or REFUSE facility; or solid waste shall be disposed of in an individual REFUSE facility such as a landfill or incinerator which is sized, constructed, maintained, and operated according to LAW.

135 Chapter

6 Physical Facilities

Parts

6-1 MATERIALS FOR CONSTRUCTION AND REPAIR 6-2 DESIGN, CONSTRUCTION, AND INSTALLATION 6-3 NUMBERS AND CAPACITIES 6-4 LOCATION AND PLACEMENT 6-5 MAINTENANCE AND OPERATION

6-1 MATERIALS FOR CONSTRUCTION AND REPAIR

Subparts

6-101 Indoor Areas 6-102 Outdoor Areas

Indoor Areas 6-101.11 Surface Characteristics.

(A) Except as specified in ¶ (B) of this section, materials for indoor floor, wall, and ceiling surfaces under conditions of normal use shall be:

(1) SMOOTH, durable, and EASILY CLEANABLE for areas where FOOD ESTABLISHMENT operations are conducted;

(2) Closely woven and EASILY CLEANABLE carpet for carpeted areas; and

(3) Nonabsorbent for areas subject to moisture such as FOOD preparation areas, walk-in refrigerators, WAREWASHING areas, toilet rooms, mobile FOOD ESTABLISHMENT SERVICING AREAS, and areas subject to flushing or spray cleaning methods.

136 (B) In a TEMPORARY FOOD ESTABLISHMENT:

(1) If graded to drain, a floor may be concrete, machine-laid asphalt, or dirt or gravel if it is covered with mats, removable platforms, duckboards, or other suitable APPROVED materials that are effectively treated to control dust and mud; and

(2) Walls and ceilings may be constructed of a material that protects the interior from the weather and windblown dust and debris.

Outdoor Areas 6-102.11 Surface Characteristics.

(A) The outdoor walking and driving areas shall be surfaced with concrete, asphalt, or gravel or other materials that have been effectively treated to minimize dust, facilitate maintenance, and prevent muddy conditions.

(B) Exterior surfaces of buildings and mobile FOOD ESTABLISHMENTS shall be of weather-resistant materials and shall comply with LAW.

(C) Outdoor storage areas for REFUSE, recyclables, or returnables shall be of materials specified under §§ 5-501.11 and 5-501.12.

6-2 DESIGN, CONSTRUCTION, AND INSTALLATION

Subparts

6-201 Cleanability 6-202 Functionality

Cleanability 6-201.11 Floors, Walls, and Ceilings.

Except as specified under § 6-201.14, the floors, floor coverings, walls, wall coverings, and ceilings shall be designed, constructed, and installed so they are SMOOTH and EASILY CLEANABLE, except that antislip floor coverings or applications may be used for safety reasons.

137 6-201.12 Floors, Walls, and Ceilings, Utility Lines.

(A) Utility service lines and pipes may not be unnecessarily exposed.

(B) Exposed utility service lines and pipes shall be installed so they do not obstruct or prevent cleaning of the floors, walls, or ceilings.

(C) Exposed horizontal utility service lines and pipes may not be installed on the floor.

6-201.13 Floor and Wall Junctures, Coved, and Enclosed or Sealed.

(A) In FOOD ESTABLISHMENTS in which cleaning methods other than water flushing are used for cleaning floors, the floor and wall junctures shall be coved and closed to no larger than 1 mm (one thirty-second inch).

(B) The floors in FOOD ESTABLISHMENTS in which water flush cleaning methods are used shall be provided with drains and be graded to drain, and the floor and wall junctures shall be coved and SEALED.

6-201.14 Floor Carpeting, Restrictions and Installation.

(A) A floor covering such as carpeting or similar material may not be installed as a floor covering in FOOD preparation areas, walk-in refrigerators, WAREWASHING areas, toilet room areas where handwashing lavatories, toilets, and urinals are located, REFUSE storage rooms, or other areas where the floor is subject to moisture, flushing, or spray cleaning methods.

(B) If carpeting is installed as a floor covering in areas other than those specified under ¶ (A) of this section, it shall be:

(1) Securely attached to the floor with a durable mastic, by using a stretch and tack method, or by another method; and

(2) Installed tightly against the wall under the coving or installed away from the wall with a space between the carpet and the wall and with the edges of the carpet secured by metal stripping or some other means.

138 6-201.15 Floor Covering, Mats and Duckboards.

Mats and duckboards shall be designed to be removable and EASILY CLEANABLE.

6-201.16 Wall and Ceiling Coverings and Coatings.

(A) Wall and ceiling covering materials shall be attached so that they are EASILY CLEANABLE.

(B) Except in areas used only for dry storage, concrete, porous blocks, or bricks used for indoor wall construction shall be finished and SEALED to provide a SMOOTH, nonabsorbent, EASILY CLEANABLE surface.

6-201.17 Walls and Ceilings, Attachments.

(A) Except as specified in ¶ (B) of this section, attachments to walls and ceilings such as light fixtures, mechanical room ventilation system components, vent covers, wall mounted fans, decorative items, and other attachments shall be EASILY CLEANABLE.

(B) In a CONSUMER area, wall and ceiling surfaces and decorative items and attachments that are provided for ambiance need not meet this requirement if they are kept clean.

6-201.18 Walls and Ceilings, Studs, Joists, and Rafters.

Studs, joists, and rafters may not be exposed in areas subject to moisture. This requirement does not apply to TEMPORARY FOOD ESTABLISHMENTS.

Functionality 6-202.11 Light Bulbs, Protective Shielding.

(A) Except as specified in ¶ (B) of this section, light bulbs shall be shielded, coated, or otherwise shatter-resistant in areas where there is exposed FOOD; clean EQUIPMENT, UTENSILS, and LINENS; or unwrapped SINGLE-SERVICE and SINGLE-USE ARTICLES.

139 (B) Shielded, coated, or otherwise shatter-resistant bulbs need not be used in areas used only for storing FOOD in unopened packages, if:

(1) The integrity of the packages can not be affected by broken glass falling onto them; and

(2) The packages are capable of being cleaned of debris from broken bulbs before the packages are opened.

(C) An infrared or other heat lamp shall be protected against breakage by a shield surrounding and extending beyond the bulb so that only the face of the bulb is exposed.

6-202.12 Heating, Ventilating, Air Conditioning System Vents.

Heating, ventilating, and air conditioning systems shall be designed and installed so that make-up air intake and exhaust vents do not cause contamination of FOOD, FOOD-CONTACT SURFACES, EQUIPMENT, or UTENSILS.

6-202.13 Insect Control Devices, Design and Installation.

(A) Insect control devices that are used to electrocute or stun flying insects shall be designed to retain the insect within the device.

(B) Insect control devices shall be installed so that:

(1) The devices are not located over a FOOD preparation area; and

(2) Dead insects and insect fragments are prevented from being impelled onto or falling on exposed FOOD; clean EQUIPMENT, UTENSILS, and LINENS; and unwrapped SINGLE-SERVICE and SINGLE-USE ARTICLES.

6-202.14 Toilet Rooms, Enclosed.

A toilet room located on the PREMISES shall be completely enclosed and provided with a tight-fitting and self-closing door except that this requirement does not apply to a toilet room that is located outside

140 a FOOD ESTABLISHMENT and does not open directly into the FOOD ESTABLISHMENT such as a toilet room that is provided by the management of a shopping mall.

6-202.15 Outer Openings, Protected.

(A) Except as specified in ¶¶ (B), (C), and (E) and under ¶ (D) of this section, outer openings of a FOOD ESTABLISHMENT shall be protected against the entry of insects and rodents by:

(1) Filling or closing holes and other gaps along floors, walls, and ceilings;

(2) Closed, tight-fitting windows; and

(3) Solid, self-closing, tight-fitting doors.

(B) Paragraph (A) of this section does not apply if a FOOD ESTABLISHMENT opens into a larger structure, such as a mall, airport, or office building, or into an attached structure, such as a porch, and the outer openings from the larger or attached structure are protected against the entry of insects and rodents.

(C) Exterior doors used as exits need not be self-closing if they are:

(1) Solid and tight-fitting;

(2) Designated for use only when an emergency exists, by the fire protection authority that has jurisdiction over the FOOD ESTABLISHMENT; and

(3) Restricted so they are not used for entrance or exit from the building for purposes other than the designated emergency exit use.

(D) Except as specified in ¶¶ (B) and (E) of this section, if the windows or doors of a FOOD ESTABLISHMENT, or of a larger structure within which a FOOD ESTABLISHMENT is located, are kept open for ventilation or other purposes or a TEMPORARY FOOD ESTABLISHMENT is not provided with windows and doors as specified under ¶ (A) of this section, the openings shall be protected against the entry of insects and rodents by:

(1) 16 mesh to 25.4mm (16 mesh to 1 inch) screens;

141 (2) Properly designed and installed air curtains; or

(3) Other effective means.

(E) Paragraph (D) of this section does not apply if flying insects and other pests are absent due to the location of the ESTABLISHMENT, the weather, or other limiting condition.

6-202.16 Exterior Walls and Roofs, Protective Barrier.

Perimeter walls and roofs of a FOOD ESTABLISHMENT shall effectively protect the establishment from the weather and the entry of insects, rodents, and other animals.

6-202.17 Outdoor Food Vending Areas, Overhead Protection.

If located outside, a machine used to vend FOOD shall be provided with overhead protection except that machines vending canned BEVERAGES need not meet this requirement.

6-202.18 Outdoor Servicing Areas, Overhead Protection.

SERVICING AREAS shall be provided with overhead protection except that areas used only for the loading of water or the discharge of SEWAGE and other liquid waste, through the use of a closed system of hoses, need not be provided with overhead protection.

6-202.19 Outdoor Walking and Driving Surfaces, Graded to Drain.

Exterior walking and driving surfaces shall be graded to drain.

6-202.110 Outdoor Refuse Areas, Curbed and Graded to Drain.

Outdoor REFUSE areas shall be constructed in accordance with LAW and shall be curbed and graded to drain to collect and dispose of liquid waste that results from the REFUSE and from cleaning the area and waste receptacles.

142 6-202.111 Private Homes and Living or Sleeping Quarters, Use Prohibition.

A private home, a room used as living or sleeping quarters, or an area directly opening into a room used as living or sleeping quarters may not be used for conducting FOOD ESTABLISHMENT operations.

6-202.112 Living or Sleeping Quarters, Separation.

Living or sleeping quarters located on the PREMISES of a FOOD ESTABLISHMENT such as those provided for lodging registration clerks or resident managers shall be separated from rooms and areas used for FOOD ESTABLISHMENT operations by complete partitioning and solid self-closing doors.

6-3 NUMBERS AND CAPACITIES

Subparts

6-301 Handwashing Facilities 6-302 Toilets and Urinals 6-303 Lighting 6-304 Ventilation 6-305 Dressing Areas and Lockers 6-306 Service Sinks

Handwashing 6-301.10 Minimum Number. Facilities Handwashing facilities shall be provided as specified under § 5-203.11.

6-301.11 Handwashing Cleanser, Availability.

Each handwashing lavatory or group of 2 adjacent lavatories shall be provided with a supply of hand cleaning liquid, powder, or bar soap.

6-301.12 Hand Drying Provision.

143 Each handwashing lavatory or group of adjacent lavatories shall be provided with:

(A) Individual, disposable towels;

(B) A continuous towel system that supplies the user with a clean towel; or

(C) A heated-air hand drying device.

6-301.13 Handwashing Aids and Devices, Use Restrictions.

A sink used for FOOD preparation or UTENSIL washing, or a service sink or curbed cleaning facility used for the disposal of mop water or similar wastes, may not be provided with the handwashing aids and devices required for a handwashing lavatory as specified under §§ 6-301.11 and 6-301.12 and ¶ 5-501.16(C).

6-301.14 Handwashing Signage.

A sign or poster that notifies FOOD EMPLOYEES to wash their hands shall be provided at all handwashing lavatories used by FOOD EMPLOYEES and shall be clearly visible to FOOD EMPLOYEES.

6-301.20 Disposable Towels, Waste Receptacle.

A handwashing lavatory or group of adjacent lavatories that is provided with disposable towels shall be provided with a waste receptacle as specified under ¶ 5-501.16(C).

Toilets and 6-302.10 Minimum Number. Urinals Toilets and urinals shall be provided as specified under § 5-203.12.

6-302.11 Toilet Tissue, Availability.

A supply of toilet tissue shall be available at each toilet.

Lighting 6-303.11 Intensity.

The light intensity shall be:

144 (A) At least 110 lux (10 foot candles) at a distance of 75 cm (30 inches) above the floor, in walk-in refrigeration units and dry FOOD storage areas and in other areas and rooms during periods of cleaning;

(B) At least 220 lux (20 foot candles):

(1) At a surface where FOOD is provided for CONSUMER self- service such as buffets and salad bars or where fresh produce or PACKAGED FOODS are sold or offered for consumption;

(2) Inside EQUIPMENT such as reach-in and under-counter refrigerators;

(3) At a distance of 75 cm (30 inches) above the floor in areas used for handwashing, WAREWASHING, and EQUIPMENT and UTENSIL storage, and in toilet rooms; and

(C) At least 540 lux (50 foot candles) at a surface where a FOOD EMPLOYEE is working with FOOD or working with UTENSILS or EQUIPMENT such as knives, slicers, grinders, or saws where EMPLOYEE safety is a factor.

Ventilation 6-304.11 Mechanical.

If necessary to keep rooms free of excessive heat, steam, condensation, vapors, obnoxious odors, smoke, and fumes, mechanical ventilation of sufficient capacity shall be provided.

Dressing Areas 6-305.11 Designation. and Lockers (A) Dressing rooms or dressing areas shall be designated if EMPLOYEES routinely change their clothes in the establishment.

(B) Lockers or other suitable facilities shall be provided for the orderly storage of EMPLOYEES' clothing and other possessions.

Service Sinks 6-306.10 Availability.

A service sink or curbed cleaning facility shall be provided as specified under § 5-203.13.

145 6-4 LOCATION AND PLACEMENT

Subparts

6-401 Handwashing Facilities 6-402 Toilet Rooms 6-403 Employee Accommodations 6-404 Distressed Merchandise 6-405 Refuse, Recyclables, and Returnables

Handwashing 6-401.10 Conveniently Located. Facilities Handwashing facilities shall be conveniently located as specified under § 5-204.11.

Toilet Rooms 6-402.11 Convenience and Accessibility.

Toilet rooms shall be conveniently located and accessible to EMPLOYEES during all hours of operation.

Employee 6-403.11 Designated Areas. Accommodations (A) Areas designated for EMPLOYEES to eat, drink, and use tobacco shall be located so that FOOD, EQUIPMENT, LINENS, and SINGLE- SERVICE and SINGLE-USE ARTICLES are protected from contamination.

(B) Lockers or other suitable facilities shall be located in a designated room or area where contamination of FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLE-SERVICE and SINGLE-USE ARTICLES can not occur.

Distressed 6-404.11 Segregation and Location. Merchandise Products that are held by the LICENSE HOLDER for credit, redemption, or return to the distributor, such as damaged, spoiled, or recalled products, shall be segregated and held in designated areas that are separated from FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLE- SERVICE and SINGLE-USE ARTICLES.

146 Refuse, 6-405.10 Receptacles, Waste Handling Units, and Recyclables, and Designated Storage Areas. Returnables Units, receptacles, and areas designated for storage of REFUSE and recyclable and returnable containers shall be located as specified under § 5-501.19.

6-5 MAINTENANCE AND OPERATION

Subparts

6-501 Premises, Structures, Attachments, and Fixtures - Methods

Premises, 6-501.11 Repairing. Structures, Attachments, The PHYSICAL FACILITIES shall be maintained in good repair. and Fixtures - Methods 6-501.12 Cleaning, Frequency and Restrictions.

(A) The PHYSICAL FACILITIES shall be cleaned as often as necessary to keep them clean.

(B) Cleaning shall be done during periods when the least amount of FOOD is exposed such as after closing. This requirement does not apply to cleaning that is necessary due to a spill or other accident.

6-501.13 Cleaning Floors, Dustless Methods.

(A) Except as specified in ¶ (B) of this section, only dustless methods of cleaning shall be used, such as wet cleaning, vacuum cleaning, mopping with treated dust mops, or sweeping using a broom and dust- arresting compounds.

(B) Spills or drippage on floors that occur between normal floor cleaning times may be cleaned:

(1) Without the use of dust-arresting compounds; and

(2) In the case of liquid spills or drippage, with the use of a small amount of absorbent compound such as sawdust or

147 diatomaceous earth applied immediately before spot cleaning.

6-501.14 Cleaning Ventilation Systems, Nuisance and Discharge Prohibition.

(A) Intake and exhaust air ducts shall be cleaned and filters changed so they are not a source of contamination by dust, dirt, and other materials.

(B) If vented to the outside, ventilation systems may not create a public health HAZARD or nuisance or unLAWful discharge.

6-501.15 Cleaning Maintenance Tools, Preventing Contamination.*

FOOD preparation sinks, handwashing lavatories, and WAREWASHING EQUIPMENT may not be used for the cleaning of maintenance tools, the preparation or holding of maintenance materials, or the disposal of mop water and similar liquid wastes.

6-501.16 Drying Mops.

After use, mops shall be placed in a position that allows them to air-dry without soiling walls, EQUIPMENT, or supplies.

6-501.17 Absorbent Materials on Floors, Use Limitation.

Except as specified in ¶ 6-501.13(B), sawdust, wood shavings, granular salt, baked clay, diatomaceous earth, or similar materials may not be used on floors.

6-501.18 Maintaining and Using Handwashing Facilities.

Handwashing facilities shall be kept clean, and maintained and used as specified under § 5-205.11.

6-501.19 Closing Toilet Room Doors.

Toilet room doors as specified under § 6-202.14 shall be kept closed

148 except during cleaning and maintenance operations.

6-501.110 Using Dressing Rooms and Lockers.

(A) Dressing rooms shall be used by EMPLOYEES if the EMPLOYEES regularly change their clothes in the establishment.

(B) Lockers or other suitable facilities shall be used for the orderly storage of EMPLOYEE clothing and other possessions.

6-501.111 Controlling Pests.*

The presence of insects, rodents, and other pests shall be controlled to minimize their presence on the PREMISES by:

(A) Routinely inspecting incoming shipments of FOOD and supplies;N

(B) Routinely inspecting the PREMISES for evidence of pests;N

(C) Using methods, if pests are found, such as trapping devices or other means of pest control as specified under §§ 7-202.12, 7-206.12, and 7-206.13; and

(D) Eliminating harborage conditions.N

6-501.112 Removing Dead or Trapped Birds, Insects, Rodents, and Other Pests.

Dead or trapped birds, insects, rodents, and other pests shall be removed from control devices and the PREMISES at a frequency that prevents their accumulation, decomposition, or the attraction of pests.

6-501.113 Storing Maintenance Tools.

Maintenance tools such as brooms, mops, vacuum cleaners, and similar items shall be:

(A) Stored so they do not contaminate FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLE-SERVICE and SINGLE-USE ARTICLES; and

(B) Stored in an orderly manner that facilitates cleaning the area

149 used for storing the maintenance tools.

6-501.114 Maintaining Premises, Unnecessary Items and Litter.

The PREMISES shall be free of:

(A) Items that are unnecessary to the operation or maintenance of the establishment such as EQUIPMENT that is nonfunctional or no longer used; and

(B) Litter.

6-501.115 Prohibiting Animals.*

(A) Except as specified in ¶¶ (B) and (C) of this section, live animals may not be allowed on the PREMISES of a FOOD ESTABLISHMENT.

(B) Live animals may be allowed in the following situations if the contamination of FOOD; clean EQUIPMENT, UTENSILS, and LINENS; and unwrapped SINGLE-SERVICE and SINGLE-USE ARTICLES can not result:

(1) Edible FISH or decorative FISH in aquariums, SHELLFISH or crustacea on ice or under refrigeration, and SHELLFISH and crustacea in display tank systems;

(2) Patrol dogs accompanying police or security officers in offices and dining, sales, and storage areas, and sentry dogs running loose in outside fenced areas;

(3) In areas that are not used for FOOD preparation and that are usually open for customers, such as dining and sales areas, SERVICE ANIMALS that are controlled by the disabled EMPLOYEE or PERSON, if a health or safety HAZARD will not result from the presence or activities of the SERVICE ANIMAL;

(4) Pets in the common dining areas of GROUP RESIDENCES at times other than during meals if:

(a) Effective partitioning and self-closing doors separate the common dining areas from FOOD storage or FOOD preparation areas,

150 (b) Condiments, EQUIPMENT, and UTENSILS are stored in enclosed cabinets or removed from the common dining areas when pets are present, and

(c) Dining areas including tables, countertops, and similar surfaces are effectively cleaned before the next meal service; and

(5) In areas that are not used for FOOD preparation, storage, sales, display, or dining, in which there are caged animals or animals that are similarly restricted, such as in a variety store that sells pets or a tourist park that displays animals.

(C) Live or dead FISH bait may be stored if contamination of FOOD; clean EQUIPMENT, UTENSILS, and LINENS; and unwrapped SINGLE- SERVICE and SINGLE-USE ARTICLES can not result.

6-501.116 Vending Machine Signs.

The LICENSE HOLDER for a VENDING MACHINE shall affix to the VENDING MACHINE a permanent sign that includes:

1. A unique identifier for the VENDING MACHINE, and

2. A telephone number for CONSUMERS to contact the LICENSE HOLDER.

151 Chapter

7 Poisonous or Toxic Materials

Parts

7-1 LABELING AND IDENTIFICATION 7-2 OPERATIONAL SUPPLIES AND APPLICATIONS 7-3 STOCK AND RETAIL SALE

7-1 LABELING AND IDENTIFICATION

Subparts

7-101 Original Containers 7-102 Working Containers

Original 7-101.11 Identifying Information, Prominence.* Containers Containers of POISONOUS OR TOXIC MATERIALS and PERSONAL CARE ITEMS shall bear a legible manufacturer's label.

Working 7-102.11 Common Name.* Containers Working containers used for storing POISONOUS OR TOXIC MATERIALS such as cleaners and SANITIZERS taken from bulk supplies shall be clearly and individually identified with the common name of the material.

152 7-2 OPERATIONAL SUPPLIES AND APPLICATIONS

Subparts

7-201 Storage 7-202 Presence and Use 7-203 Container Prohibitions 7-204 Chemicals 7-205 Lubricants 7-206 Pesticides 7-207 Medicines 7-208 First Aid Supplies 7-209 Other Personal Care Items

Storage 7-201.11 Separation.*

POISONOUS OR TOXIC MATERIALS shall be stored so they can not contaminate FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLE-SERVICE and SINGLE-USE ARTICLES by:

(A) Separating the POISONOUS OR TOXIC MATERIALS by spacing or partitioning;S and

(B) Locating the POISONOUS OR TOXIC MATERIALS in an area that is not above FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLE- SERVICE or SINGLE-USE ARTICLES. This paragraph does not apply to EQUIPMENT and UTENSIL cleaners and SANITIZERS that are stored in WAREWASHING areas for availability and convenience if the materials are stored to prevent contamination of FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLE-SERVICE and SINGLE- USE ARTICLES.

Presence and 7-202.11 Restriction.* Use (A) Only those POISONOUS OR TOXIC MATERIALS that are required for the operation and maintenance of a FOOD ESTABLISHMENT, such as for the cleaning and SANITIZING of EQUIPMENT and UTENSILS and the control of insects and rodents, shall be allowed in a FOOD ESTABLISHMENT.S

153 (B) ¶ (A) of this section does not apply to PACKAGED POISONOUS OR TOXIC MATERIALS that are for retail sale.

7-202.12 Conditions of Use.*

POISONOUS OR TOXIC MATERIALS shall be:

(A) Used according to:

(1) LAW and this Code,

(2) Manufacturer's use directions included in labeling, and, for a pesticide, manufacturer's label instructions that state that use is allowed in a FOOD ESTABLISHMENT,

(3) The conditions of certification, if certification is required, for use of the pest control materials, and

(4) Additional conditions that may be established by the REGULATORY AUTHORITY; and

(B) Applied so that:

(1) A HAZARD to EMPLOYEES or other PERSONS is not constituted, and

(2) Contamination including toxic residues due to drip, drain, fog, splash or spray on FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLE-SERVICE and SINGLE-USE ARTICLES is prevented, and for a restricted-use pesticide, this is achieved by:

(a) Removing the items,

(b) Covering the items with impermeable covers, or

(c) Taking other appropriate preventive actions, and

(d) Cleaning and SANITIZING EQUIPMENT and UTENSILS after the application.

(C) A RESTRICTED USE PESTICIDE shall be applied only by an applicator certified as defined in 7 USC 136(e) Certified Applicator, of the Federal Insecticide, Fungicide and

154 Rodenticide Act, or a PERSON under the direct supervision of a certified applicator.

Container 7-203.11 Poisonous or Toxic Material Containers.* Prohibitions A container previously used to store POISONOUS OR TOXIC MATERIALS may not be used to store, transport, or dispense FOOD.

Chemicals 7-204.11 Sanitizers, Criteria.*

Chemical SANITIZERS and other chemical antimicrobials applied to FOOD-CONTACT SURFACEs shall meet the requirements specified in 21 CFR 178.1010 sanitizing solutions.

7-204.12 Chemicals for Washing Fruits and Vegetables, Criteria.*

Chemicals used to wash or peel raw, whole fruits and vegetables shall meet the requirements specified in 21 CFR 173.315 Chemicals used in washing or to assist in the lye peeling of fruits and vegetables.

7-204.13 Boiler Water Additives, Criteria.*

Chemicals used as boiler water ADDITIVES shall meet the requirements specified in 21 CFR 173.310 Boiler Water Additives.

7-204.14 Drying Agents, Criteria.*

Drying agents used in conjunction with SANITIZATION shall:

(A) Contain only components that are listed as one of the following:

(1) Generally recognized as safe for use in FOOD as specified in 21 CFR 182 - Substances Generally Recognized as Safe, or 21 CFR 184 - Direct Food Substances Affirmed as Generally Recognized as Safe,

(2) Generally recognized as safe for the intended use as specified in 21 CFR 186 - Indirect Food Substances Affirmed as Generally Recognized as Safe,

155 (3) APPROVED for use as a drying agent under a prior sanction specified in 21 CFR 181 - Prior-Sanctioned Food Ingredients,

(4) Specifically regulated as an indirect FOOD ADDITIVE for use as a drying agent as specified in 21 CFR Parts 175-178, or

(5) APPROVED for use as a drying agent under the threshold of regulation process established by 21 CFR 170.39 Threshold of regulation for substances used in food-contact articles; and

(B) When SANITIZATION is with chemicals, the approval required under Subparagraph (A)(3) or (A)(5) of this section or the regulation as an indirect FOOD ADDITIVE required under Subparagraph (A)(4) of this section, shall be specifically for use with chemical SANITIZING solutions.

Lubricants 7-205.11 Incidental Food Contact, Criteria.*

Lubricants shall meet the requirements specified in 21 CFR 178.3570 Lubricants with incidental food contact, if they are used on FOOD- CONTACT SURFACES, on bearings and gears located on or within FOOD- CONTACT SURFACES, or on bearings and gears that are located so that lubricants may leak, drip, or be forced into FOOD or onto FOOD- CONTACT SURFACES.

Pesticides 7-206.11 Restricted Use Pesticides, Criteria.*

RESTRICTED USE PESTICIDES specified under ¶ 7-202.12(C) shall meet the requirements specified in 40 CFR 152 Subpart I - Classification of Pesticides.

7-206.12 Rodent Bait Stations.*

Rodent bait shall be contained in a covered, tamper-resistant bait station.

7-206.13 Tracking Powders, Pest Control and Monitoring.*

(A) A tracking powder pesticide may not be used in a FOOD ESTABLISHMENT.

(B) If used, a nontoxic tracking powder such as talcum or flour may not

156 contaminate FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLE-SERVICE and SINGLE-USE ARTICLES.N

Medicines 7-207.11 Restriction and Storage.*

(A) Only those medicines that are necessary for the health of EMPLOYEES shall be allowed in a FOOD ESTABLISHMENT. This section does not apply to medicines that are stored or displayed for retail sale.

(B) Medicines that are in a FOOD ESTABLISHMENT for the EMPLOYEES' use shall be labeled as specified under § 7-101.11 and located to prevent the contamination of FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLE-SERVICE and SINGLE-USE ARTICLES.

7-207.12 Refrigerated Medicines, Storage.*

Medicines belonging to EMPLOYEES or to children in a day care center that require refrigeration and are stored in a FOOD refrigerator shall be:

(A) Stored in a package or container and kept inside a covered, leakproof container that is identified as a container for the storage of medicines; and

(B) Located so they are inaccessible to children.

First Aid Supplies 7-208.11 Storage.*

First aid supplies that are in a FOOD ESTABLISHMENT for the EMPLOYEES' use shall be:

(A) Labeled as specified under § 7-101.11;S and

(B) Stored in a kit or a container that is located to prevent the contamination of FOOD, EQUIPMENT, UTENSILS, and LINENS, and SINGLE-SERVICE and SINGLE-USE ARTICLES.S

Other Personal 7-209.11 Storage. Care Items Except as specified under §§ 7-207.12 and 7-208.11, EMPLOYEES shall store their PERSONAL CARE ITEMS in facilities as specified under ¶ 6-305.11(B).

157 7-3 STOCK AND RETAIL SALE

Subpart

7-301 Storage and Display

Storage and 7-301.11 Separation.* Display POISONOUS OR TOXIC MATERIALS shall be stored and displayed for retail sale so they can not contaminate FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLE-SERVICE and SINGLE-USE ARTICLES by:

(A) Separating the POISONOUS OR TOXIC MATERIALS by spacing or partitioning;S and

(B) Locating the POISONOUS OR TOXIC MATERIALS in an area that is not above FOOD, EQUIPMENT, UTENSILS, LINENS, and SINGLE- SERVICE or SINGLE-USE ARTICLES.

158 Chapter

8 Compliance and Enforcement

Parts

8-1 CODE APPLICABILITY 8-2 PLAN SUBMISSION AND APPROVAL 8-3 LICENSE TO OPERATE 8-4 INSPECTION AND CORRECTION OF VIOLATIONS 8-5 PREVENTION OF FOODBORNE DISEASE TRANSMISSION BY EMPLOYEES

8-1 CODE APPLICABILITY

Subparts

8-101 Use for Intended Purpose 8-102 Additional Requirements 8-103 Variances

Use for Intended 8-101.10 Public Health Protection. Purpose (A) The REGULATORY AUTHORITY shall apply this Code to promote its underlying purpose of safeguarding public health and ensuring that FOOD is safe, unADULTERATED, and honestly presented when offered to the CONSUMER.

(B) In enforcing the provisions of this Code, the REGULATORY AUTHORITY shall assess existing facilities or EQUIPMENT that were in use before the effective date of this Code based on the following considerations:

(1) Whether the facilities or EQUIPMENT are in good repair and capable of being maintained in a sanitary condition;

(2) Whether FOOD-CONTACT SURFACES comply with Subpart 4-101;

159 (3) Whether the capacities of cooling, heating, and holding EQUIPMENT are sufficient to comply with § 4-301.11; and

(4) The existence of a documented agreement with the LICENSE HOLDER that the facilities or EQUIPMENT will be replaced as specified under ¶ 8-304.11(G) or upgraded or replaced as specified under ¶ 8-304.11(H).

Variances 8-103.10 Modifications and Waivers.

The REGULATORY AUTHORITY may grant a VARIANCE by modifying or waiving the requirements of this Code if in the opinion of the REGULATORY AUTHORITY a health HAZARD or nuisance will not result from the VARIANCE. If a VARIANCE is granted, the REGULATORY AUTHORITY shall retain the information specified under § 8-103.11 in its records for the FOOD ESTABLISHMENT.

8-103.11 Documentation of Proposed Variance and Justification.

Before a VARIANCE from a requirement of this Code is APPROVED, the information that shall be provided by the PERSON requesting the VARIANCE and retained in the REGULATORY AUTHORITY'S file on the FOOD ESTABLISHMENT includes:

(A) A statement of the proposed VARIANCE of the Code requirement citing relevant Code section numbers;

(B) An analysis of the rationale for how the potential public health HAZARDS and nuisances addressed by the relevant Code sections will be alternatively addressed by the proposal; and

(C) A HACCP PLAN if required as specified under ¶ 8-201.13(A) that includes the information specified under § 8-201.14 as it is relevant to the VARIANCE requested.

8-103.12 Conformance with Approved Procedures.*

If the REGULATORY AUTHORITY grants a VARIANCE as specified in § 8-103.10, or a HACCP PLAN is otherwise required as specified under § 8-201.13, the LICENSE HOLDER shall:

160 (A) Comply with the HACCP PLANs and procedures that are submitted as specified under § 8-201.14 and APPROVED as a basis for the modification or waiver; and

(B) Maintain and provide to the REGULATORY AUTHORITY, upon request, records specified under ¶¶ 8-201.14(D) and (E) that demonstrate that the following are routinely employed;

(1) Procedures for monitoring CRITICAL CONTROL POINTS,

(2) Monitoring of the CRITICAL CONTROL POINTS,

(3) Verification of the effectiveness of an operation or process, and

(4) Necessary corrective actions if there is failure at a CRITICAL CONTROL POINT.

161 8-2 PLAN SUBMISSION AND APPROVAL

Subparts

8-201 Facility and Operating Plans 8-202 Confidentiality 8-203 Construction Inspection and Approval

Facility and 8-201.11 When Plans Are Required. Operating Plans A LICENSE applicant or LICENSE HOLDER shall submit to the REGULATORY AUTHORITY properly prepared plans and specifications for review and approval before:

(A) The construction of a FOOD ESTABLISHMENT;

(B) The conversion of an existing structure for use as a FOOD ESTABLISHMENT; or

(C) The remodeling of a FOOD ESTABLISHMENT or a change of type of FOOD ESTABLISHMENT or FOOD operation as described in A.A.C. R9-8-103(A)(6)-(7) if the REGULATORY AUTHORITY determines that plans and specifications are necessary to ensure compliance with this Code.

8-201.12 Contents of the Plans and Specifications.

The plans and specifications for a FOOD ESTABLISHMENT, including a FOOD ESTABLISHMENT specified under § 8-201.13, shall include, as required by the REGULATORY AUTHORITY based on the type of operation, type of FOOD preparation, and FOODS prepared, the following information to demonstrate conformance with Code provisions:

(A) Intended menu;

(B) Anticipated volume of FOOD to be stored, prepared, and sold or served;

(C) Proposed layout, mechanical schematics, construction materials, and finish schedules;

(D) Proposed EQUIPMENT types, manufacturers, model numbers, locations, dimensions, performance capacities, and installation

162 specifications;

(E) Evidence that standard procedures that ensure compliance with the requirements of this Code are developed or are being developed; and

(F) Other information that may be required by the REGULATORY AUTHORITY for the proper review of the proposed construction, conversion or modification, and procedures for operating a FOOD ESTABLISHMENT.

8-201.13 When a HACCP Plan is Required.

(A) Before engaging in an activity that requires a HACCP PLAN, a LICENSE applicant or LICENSE HOLDER shall submit to the REGULATORY AUTHORITY for approval a properly prepared HACCP PLAN as specified under § 8-201.14 and the relevant provisions of this Code if:

(1) Submission of a HACCP PLAN is required according to LAW;

(2) A VARIANCE is required as specified under § 3-502.11, ¶ 4-204.110(B), or Subparagraphs 3-203.12(B)(2)(b) or 3-401.11(D)(3); or

(3) The REGULATORY AUTHORITY determines that a FOOD preparation or processing method requires a VARIANCE based on a plan submittal specified under § 8-201.12, an inspectional finding, or a VARIANCE request.

(B) A LICENSE applicant or LICENSE HOLDER shall have a properly prepared HACCP PLAN as specified under § 3-502.12.

8-201.14 Contents of a HACCP Plan.

For a FOOD ESTABLISHMENT that is required under § 8-201.13 to have a HACCP PLAN, the plan and specifications shall indicate:

(A) A categorization of the types of POTENTIALLY HAZARDOUS FOODS that are specified in the menu such as soups and sauces, salads, and bulk, solid FOODS such as MEAT roasts, or of other FOODS that are specified by the REGULATORY AUTHORITY;

163 (B) A flow diagram by specific FOOD or category type identifying CRITICAL CONTROL POINTS and providing information on the following: (1) Ingredients, materials, and EQUIPMENT used in the preparation of that FOOD, and

(2) Formulations or recipes that delineate methods and procedural control measures that address the FOOD safety concerns involved;

(C) FOOD EMPLOYEE and supervisory training plan that addresses the FOOD safety issues of concern;

(D) A statement of standard operating procedures for the plan under consideration including clearly identifying:

(1) Each CRITICAL CONTROL POINT,

(2) The CRITICAL LIMITS for each CRITICAL CONTROL POINT,

(3) The method and frequency for monitoring and controlling each CRITICAL CONTROL POINT by the FOOD EMPLOYEE designated by the PERSON IN CHARGE,

(4) The method and frequency for the PERSON IN CHARGE to routinely verify that the FOOD EMPLOYEE is following standard operating procedures and monitoring CRITICAL CONTROL POINTS,

(5) Action to be taken by the PERSON IN CHARGE if the CRITICAL LIMITS for each CRITICAL CONTROL POINT are not met, and

(6) Records to be maintained by the PERSON IN CHARGE to demonstrate that the HACCP PLAN is properly operated and managed; and

(E) Additional scientific data or other information, as required by the REGULATORY AUTHORITY, supporting the determination that FOOD safety is not compromised by the proposal.

8-203.10 Preoperational Inspections.

Construction The REGULATORY AUTHORITY shall conduct one or more preoperational Inspection and inspections to verify that the FOOD ESTABLISHMENT is constructed and Approval equipped in accordance with the APPROVED plans and APPROVED modifications of those plans, has established standard operating procedures as specified under ¶ 8-201.12(E), and is in compliance

164 with LAW and this Code.

165 8-3 LICENSE TO OPERATE

Subparts

8-301 Requirement R9-8-103 Application R9-8-104 Time Frames R9-8-105 Issuance of License 8-304 Conditions of Retention R9-8-106 License Suspension or Revocation

Requirement 8-301.11 Prerequisite for Operation.

A PERSON may not operate a FOOD ESTABLISHMENT without a valid LICENSE to operate issued by the REGULATORY AUTHORITY.

Application R9-8-103. Food Establishment License Application

A. To obtain a FOOD ESTABLISHMENT LICENSE, an applicant shall complete and submit to the REGULATORY AUTHORITY a FOOD ESTABLISHMENT LICENSE application form supplied by the REGULATORY AUTHORITY that indicates all of the following:

1. The full name, telephone number, and mailing address of the applicant;

2. The name, telephone number, and street address of the FOOD ESTABLISHMENT;

3. Whether the FOOD ESTABLISHMENT is mobile or stationary;

4. Whether the FOOD ESTABLISHMENT is temporary or permanent;

5. Whether the FOOD ESTABLISHMENT facility is one of the following:

a. A new construction that is not yet completed,

b. An existing structure that is being converted for use as a FOOD ESTABLISHMENT, or

c. An existing FOOD ESTABLISHMENT facility that is

166 being remodeled;

6. Whether the FOOD ESTABLISHMENT prepares, offers for sale, or serves POTENTIALLY HAZARDOUS FOOD;

7. Whether the FOOD ESTABLISHMENT does any of the following:

a. Prepares, offers for sale, or serves POTENTIALLY HAZARDOUS FOOD only to order upon CONSUMER request;

b. Prepares, offers for sale, or serves POTENTIALLY HAZARDOUS FOOD in advance in quantities based on projected CONSUMER demand;

c. Prepares, offers for sale, or serves POTENTIALLY HAZARDOUS FOOD using time alone, rather than time and temperature, as the public health control as described in FC § 3-501.19;

d. Prepares POTENTIALLY HAZARDOUS FOOD in advance using a multiple stage FOOD preparation method that may include the following:

i. Combining POTENTIALLY HAZARDOUS FOOD ingredients,

ii. Cooking,

iii. Cooling,

iv. Reheating,

v. Hot or cold holding,

vi. Freezing, or

vii. Thawing;

e. Prepares FOOD as specified under subsection (A)(7)(d) for delivery to and consumption at a location off of the PREMISES where prepared; or

f. Prepares FOOD as specified under subsection (A)(7)(d)

167 for service to a HIGHLY SUSCEPTIBLE POPULATION;

g. Does not prepare FOOD, but offers for sale only pre- PACKAGED FOOD that is not POTENTIALLY HAZARDOUS FOOD; and

8. The applicant’s signature and the date signed.

B. An applicant who operates FOOD ESTABLISHMENTS at multiple locations shall submit a completed LICENSE application for each location.

R9-8-104. Time-frames

A. This Section applies to the Department and to a local health department or public health services district to which the duty to comply with A.R.S. §§ 41-1074 through 41-1076 has been delegated by the Department.

B. The overall time-frame described in A.R.S. § 41-1072 for each type of approval granted by the REGULATORY AUTHORITY is set forth in Table 1. The applicant, LICENSE HOLDER, or requester and the REGULATORY AUTHORITY may agree in writing to extend the substantive review time-frame and the overall time-frame. An extension of the substantive review time-frame and the overall time- frame may not exceed 25% of the overall time-frame.

C. The administrative completeness review time-frame described in A.R.S. § 41-1072 for each type of approval granted by the REGULATORY AUTHORITY is set forth in Table 1 and begins on the date that the REGULATORY AUTHORITY receives an application or request for approval.

1. The REGULATORY AUTHORITY shall mail a notice of administrative completeness or deficiencies to the applicant, LICENSE HOLDER, or requester within the administrative completeness review time-frame.

a. A notice of deficiencies shall list each deficiency and the information and documentation needed to complete the application or request for approval.

b. If the REGULATORY AUTHORITY issues a notice of

168 deficiencies within the administrative completeness review time-frame, the administrative completeness review time-frame and the overall time-frame are suspended from the date that the notice is issued until the date that the REGULATORY AUTHORITY receives the missing information from the applicant, LICENSE HOLDER, or requester.

c. If the applicant, LICENSE HOLDER, or requester fails to submit to the REGULATORY AUTHORITY all of the information and documents listed in the notice of deficiencies within 180 days of the date that the REGULATORY AUTHORITY mailed the notice of deficiencies, the REGULATORY AUTHORITY shall consider the application or request for approval withdrawn.

2. If the REGULATORY AUTHORITY issues a LICENSE or other approval to the applicant, LICENSE HOLDER, or requester during the administrative completeness review time-frame, the REGULATORY AUTHORITY shall not issue a separate written notice of administrative completeness.

D. The substantive review time-frame described in A.R.S. § 41-1072 is set forth in Table 1 and begins on the date of the notice of administrative completeness.

1. The REGULATORY AUTHORITY shall mail written notification of approval or denial of the application or other request for approval to the applicant, LICENSE HOLDER, or requester within the substantive review time-frame.

2. As part of the substantive review for a FOOD ESTABLISHMENT LICENSE, the REGULATORY AUTHORITY may complete an inspection that may require more than 1 visit to the FOOD ESTABLISHMENT.

3. During the substantive review time-frame, the REGULATORY AUTHORITY may make 1 comprehensive written request for additional information, unless the REGULATORY AUTHORITY and the applicant, LICENSE HOLDER, or requester have agreed in writing to allow the REGULATORY AUTHORITY to submit supplemental requests for information.

a. The comprehensive written request regarding a FOOD ESTABLISHMENT LICENSE application may include a

169 request for submission of plans and specifications, as described in FC § 8-201.11.

b. The comprehensive written request regarding a request for a VARIANCE under FC § 8-103.10 may include a request for a HACCP PLAN, as described in FC § 8-201.13(A), if the REGULATORY AUTHORITY determines that a HACCP PLAN is required.

c. If the REGULATORY AUTHORITY issues a comprehensive written request or a supplemental request for information, the substantive review time-frame and the overall time-frame shall be suspended from the date that the REGULATORY AUTHORITY issues the request until the date that the REGULATORY AUTHORITY receives all of the information requested.

4. The REGULATORY AUTHORITY shall issue a LICENSE or an approval unless:

a. For a FOOD ESTABLISHMENT LICENSE application, the REGULATORY AUTHORITY determines that the application for a FOOD ESTABLISHMENT LICENSE or the FOOD ESTABLISHMENT does not satisfy all of the requirements of this Article;

b. For a request for a VARIANCE, the REGULATORY AUTHORITY determines that the request for a VARIANCE fails to demonstrate that the VARIANCE will not result in a health HAZARD or nuisance;

c. For a request for approval of plans and specifications, the REGULATORY AUTHORITY determines that the plans and specifications do not satisfy all of the requirements of this Article;

d. For a request for approval of a HACCP PLAN, the REGULATORY AUTHORITY determines that the HACCP PLAN does not satisfy all of the requirements of this Article;

e. For a request for approval of an inspection form, the Department determines that the inspection form does not satisfy all of the requirements of A.A.C. R9-8-108(B)-(C);

170 or f. For a request for approval of a quality assurance program, the Department determines that the quality assurance program does not satisfy all of the requirements of A.A.C. R9-8-108(E)(1).

5. If the REGULATORY AUTHORITY disapproves an application or request for approval, the REGULATORY AUTHORITY shall send to the applicant, LICENSE HOLDER, or requester a written notice of disapproval setting forth the reasons for disapproval and all other information required by A.R.S. § 41- 1076.

E. For the purpose of computing time-frames in this Section, the day of the act, event, or default from which the designated period of time begins to run shall not be included. Intermediate Saturdays, Sundays, and legal holidays shall be included in the computation. The last day of the period so computed shall be included unless it is a Saturday, a Sunday, or a legal holiday, in which event the period runs until the end of the next day that is not a Saturday, a Sunday, or a legal holiday.

171 Table 1. Time-frames (in days)

Type of Approval Statutory Authority Overall Administrativ Substantive Time- e Review Time- frame Completenes frame s Review Time-frame

Food Establishment A.R.S. § 36-136(H)(4) 60 30 30 License

Approval of Request for A.R.S. § 36-136(H)(4) 90 30 60 VARIANCE under FC § 8- 103.10

Approval of Plans and A.R.S. § 36-136(H)(4) 90 30 60 Specifications under FC § 8-201.11

Approval of HACCP A.R.S. § 36-136(H)(4) 90 30 60 PLAN under FC § 8- 201.13

Approval of Inspection A.R.S. § 36-136(H)(4) 90 30 60 Form

Approval of Quality A.R.S. § 36-136(H)(4) 90 30 60 Assurance Program

172 R9-8-105. Issuance of License

A FOOD ESTABLISHMENT LICENSE issued by the REGULATORY AUTHORITY shall bear the following information:

1. The name of the FOOD ESTABLISHMENT,

2. The street address of the FOOD ESTABLISHMENT,

3. The full name of the LICENSE HOLDER,

4. The mailing address of the LICENSE HOLDER, and

5. A unique identification number assigned by the REGULATORY AUTHORITY.

8-304.10 Responsibilities of the Regulatory Authority.

(A) At the time a LICENSE is first issued, the REGULATORY AUTHORITY shall provide to the LICENSE HOLDER a copy of this Code so that the LICENSE HOLDER is notified of the compliance requirements and the conditions of retention, as specified under § 8-304.11, that are applicable to the LICENSE.

(B) Failure to provide the information specified in ¶ (A) of this section does not prevent the REGULATORY AUTHORITY from taking authorized action or seeking remedies if the LICENSE HOLDER fails to comply with this Code or an order, warning, or directive of the REGULATORY AUTHORITY.

8-304.11 Responsibilities of the License Holder.

Upon acceptance of the LICENSE issued by the REGULATORY AUTHORITY, the LICENSE HOLDER in order to retain the LICENSE shall:

(A) Post the LICENSE in a location in the FOOD ESTABLISHMENT that is conspicuous to CONSUMERS;

(B) Comply with the provisions of this Code including the conditions of a granted VARIANCE as specified under § 8-103.12, and APPROVED plans as specified under § 8-201.12;

(C) If a FOOD ESTABLISHMENT is required under § 8-201.13 to operate under a HACCP PLAN, comply with the plan as specified

173 under § 8-103.12;

(D) Require FOOD EMPLOYEE applicants to whom a conditional offer of employment is made and FOOD EMPLOYEES to report to the PERSON IN CHARGE the information required under § 2-201.11;

(E) Immediately discontinue operations and notify the REGULATORY AUTHORITY if an IMMINENT HEALTH HAZARD may exist as specified under § 8-404.11;

(F) Allow representatives of the REGULATORY AUTHORITY access to the FOOD ESTABLISHMENT as specified under § 8-402.11;

(G) Except as specified under ¶ (H) of this section, replace existing facilities and EQUIPMENT specified in § 8-101.10 with facilities and EQUIPMENT that comply with this Code if:

(1) The REGULATORY AUTHORITY directs the replacement because the facilities and EQUIPMENT constitute a public health HAZARD or nuisance or no longer comply with the criteria upon which the facilities and EQUIPMENT were accepted,

(2) The REGULATORY AUTHORITY directs the replacement of the facilities and EQUIPMENT because of a change of ownership, or

(3) The facilities and EQUIPMENT are replaced in the normal of operation;

(H) Upgrade or replace refrigeration EQUIPMENT as specified under ¶ 3-501.16(C), if the circumstances specified under Subparagraphs (G)(1)-(3) of this section do not occur first, and 10 years pass after the REGULATORY AUTHORITY adopts this Code;

(I) Comply with directives of the REGULATORY AUTHORITY including time frames for corrective actions specified in inspection reports, notices, orders, warnings, and other directives issued by the REGULATORY AUTHORITY in regard to the LICENSE HOLDER'S FOOD ESTABLISHMENT or in response to community emergencies;

(J) Accept notices issued and served by the REGULATORY AUTHORITY according to LAW; and (K) Be subject to the administrative, civil, injunctive, and criminal

174 remedies authorized in LAW for failure to comply with this Code or a directive of the REGULATORY AUTHORITY, including timeframes for corrective actions specified in inspection reports, notices, orders, warnings, and other directives.

8-304.20 Licenses Not Transferable.

A LICENSE may not be transferred from one PERSON to another PERSON, from one FOOD ESTABLISHMENT to another, or from one type of operation to another if the FOOD operation changes from the type of operation specified in the application as described in A.A.C. R9- 8-103(A)(6)-(7) and the change in operation is not APPROVED.

R9-8-106. License Suspension or Revocation

A. The REGULATORY AUTHORITY may suspend or revoke a FOOD ESTABLISHMENT LICENSE if the LICENSE HOLDER:

1. Violates this Article or A.R.S. § 36-601, or

2. Provides false information on a LICENSE application.

B. A LICENSE revocation or suspension hearing shall be conducted as follows:

1. If the REGULATORY AUTHORITY is the Department, the hearing shall be conducted in accordance with A.R.S. Title 41, Chapter 6, Article 10 and any rules promulgated by the Office of Administrative Hearings;

2. If the REGULATORY AUTHORITY is a local health department or public health services district to which the duty to comply with A.R.S. Title 41, Chapter 6, Article 10 has been delegated, the hearing shall be conducted in accordance with A.R.S. Title 41, Chapter 6, Article 10 and any rules promulgated by the Office of Administrative Hearings; and

3. For all other REGULATORY AUTHORITIES, a LICENSE revocation or suspension hearing shall be conducted in accordance with the procedures adopted by a county board of supervisors as required by A.R.S. § 36-183.04(E).

175 8-4 INSPECTION AND CORRECTION OF VIOLATIONS

Subparts

R9-8-108 Inspection Standardization and Documentation 8-401 Frequency 8-402 Access 8-403 Report of Findings 8-404 Imminent Health Hazard 8-405 Critical Violation 8-406 Noncritical Violation R9-8-109 Cease and Desist and Abatement

R9-8-108. Inspection Standardization and Documentation

A. At each inspection, the REGULATORY AUTHORITY shall, at a minimum, inspect for compliance with each of the applicable CRITICAL ITEMS in the following categories:

1. Temperature control of POTENTIALLY HAZARDOUS FOODS, as required by FC §§ 3-401.11, 3-401.12, 3-403.11, 3-501.14, and 3-501.16;

2. EMPLOYEE health and hygienic practices, as required by FC §§ 2-201.11, 2-301.11, 2-301.12, 2-301.14, 2-401.11, 2- 401.12, 2-403.11, 3-301.11, 3-301.12, and 5-203.11;

3. Time as a public health control, as required by FC § 3-501.19;

4. FOOD condition and source, as required by FC §§ 3-101.11, 3-201.11, 3-201.12, 3-201.14, 3-201.15, 3-201.16, 3-201.17, 3-202.11, 3-202.13, 3-202.14, 3-202.15, 3-202.16, 3-202.18, 3-203.12, 5-101.11, and 5-101.13;

5. CONSUMER advisories, as required by FC § 3-603.11;

6. Contamination prevention, as required by FC §§ 3-302.11, 3- 302.13, 3-302.14, 3-304.11, 3-306.13, 3-306.14, 4-601.11, 4- 602.11, 4-702.11, 4-703.11, 5-101.12, 5-201.11, and 5- 202.11;

176 7. Date marking and disposal of READY-TO-EAT FOODS, as required by FC §§ 3-501.17 and 3-501.18;

8. Responsibility and knowledge of the PERSON IN CHARGE, as required by FC §§ 2-101.11 and 2-102.11; and

9. Compliance with a HACCP PLAN or VARIANCE, as required by FC § 8-103.12;

B. The REGULATORY AUTHORITY shall document its inspection results on an inspection report form provided or approved by the Department. The inspection report form shall include the following:

1. The name and address of the FOOD ESTABLISHMENT inspected;

2. The LICENSE number of the FOOD ESTABLISHMENT inspected;

3. The date of inspection;

4. The type of inspection;

5. A rating for each of the observed CRITICAL ITEMS listed in subsection (A), using a rating scheme that indicates whether or not the CRITICAL ITEM was met;

6. Space for comments, including observed violations of non- CRITICAL ITEMS;

7. Signature and date lines for the PERSON IN CHARGE of the FOOD ESTABLISHMENT; and

8. Signature and date lines for the inspector conducting the inspection.

C. The REGULATORY AUTHORITY shall also document on the inspection form the applicable CRITICAL ITEMS listed in subsection (A) that were not observed during the inspection, unless the REGULATORY AUTHORITY has a quality assurance program that has been approved by the Department under subsection (E).

177 D. If a REGULATORY AUTHORITY desires to create its own inspection form, the REGULATORY AUTHORITY may request approval of its inspection form by submitting a written request to the Department along with a copy of the inspection form for which approval is sought. The Department shall approve an inspection form if it determines that the inspection form satisfies all of the requirements of subsections (B) and (C).

E. A REGULATORY AUTHORITY may request approval of a quality assurance program by submitting a written request to the Department along with a description of the quality assurance program for which approval is sought.

1. The quality assurance program shall include the following:

a. A system for monitoring the inspection reports completed by each inspector every 6 months and comparing them to the reports of other inspectors and the REGULATORY AUTHORITY as a whole with respect to the number and types of violations documented during the same period;

b. Identification of each inspector whose inspection reports are incongruous;

c. Reinspection of a representative sample of an inspector’s FOOD ESTABLISHMENTS for which inspection reports are incongruous by a quality assurance inspector within 30 days of identification of an inspector under subsection (E)(1)(b) to determine whether the incongruous reports indicate a misapplication of the rules by the inspector;

d. Follow-up with each inspector determined by a quality assurance inspector to have misapplied the rules:

i. If the inspector has not previously required follow-up, additional training by a quality assurance inspector regarding any misapplication of the rules by the inspector;

ii. If the inspector has previously received additional training under subsection (E)(1)(d)(i), formal counseling by the inspector’s direct supervisor and a

178 quality assurance inspector; or

iii. If the inspector has previously been formally counseled under subsection (E)(1)(d)(ii), disciplinary action; and

e. Consideration by the REGULATORY AUTHORITY of any misapplication of the rules by the inspector when completing the inspector’s performance evaluations.

2. The Department shall approve a quality assurance program if it determines that the quality assurance program satisfies all of the requirements of subsection (E)(1).

8-401.10 Establishing Inspection Interval.

FREQUENCY (A) Except as specified in ¶¶ (B) and (C) of this section, the REGULATORY AUTHORITY shall inspect a FOOD ESTABLISHMENT at least once every 6 months.

(B) The REGULATORY AUTHORITY may increase the interval between inspections beyond 6 months if:

(1) The FOOD ESTABLISHMENT is fully operating under an APPROVED and validated HACCP PLAN as specified under § 8-201.14 and ¶¶ 8-103.12(A) and (B);

(2) The FOOD ESTABLISHMENT is assigned a less frequent inspection frequency based on a written risk-based inspection schedule that is being uniformly applied throughout the jurisdiction and at least once every 6 months the establishment is contacted by telephone or other means by the REGULATORY AUTHORITY to ensure that the establishment manager and the nature of FOOD operation are not changed; or

(3) The establishment's operation involves only coffee service and other unPACKAGED or prePACKAGED FOOD that is not POTENTIALLY HAZARDOUS such as carbonated BEVERAGES and snack FOOD such as chips, nuts, popcorn, and pretzels.

(C) The REGULATORY AUTHORITY shall periodically inspect throughout its LICENSE period a TEMPORARY FOOD ESTABLISHMENT that prepares, sells, or serves unPACKAGED POTENTIALLY HAZARDOUS FOOD and that:

179 (1) Has improvised rather than permanent facilities or EQUIPMENT for accomplishing functions such as handwashing, FOOD preparation and protection, FOOD temperature control, WAREWASHING, providing DRINKING WATER, waste retention and disposal, and insect and rodent control; or

(2) Has inexperienced FOOD EMPLOYEES.

8-401.20 Performance- and Risk-Based.

Within the parameters specified in § 8-401.10, the REGULATORY AUTHORITY shall prioritize, and conduct more frequent inspections based upon its assessment of a FOOD ESTABLISHMENT'S history of compliance with this Code and the establishment's potential as a vector of foodborne illness by evaluating:

(A) Past performance, for nonconformance with Code or HACCP PLAN requirements that are critical;

(B) Past performance, for numerous or repeat violations of Code or HACCP PLAN requirements that are noncritical;

(C) Past performance, for complaints investigated and found to be valid;

(D) The HAZARDS associated with the particular FOODS that are prepared, stored, or served;

(E) The type of operation including the methods and extent of FOOD storage, preparation, and service;

(F) The number of people served; and

(G) Whether the population served is a HIGHLY SUSCEPTIBLE POPULATION.

8-402.11 Allowed at Reasonable Times after Due Notice.

After the REGULATORY AUTHORITY presents official credentials and provides notice of the purpose of, and an intent to conduct, an inspection, the PERSON IN CHARGE shall allow the REGULATORY AUTHORITY to determine if the FOOD ESTABLISHMENT is in compliance with this Code by allowing access to the establishment, allowing inspection, and providing information and records specified in this

180 Code and to which the REGULATORY AUTHORITY is entitled according to LAW, during the FOOD ESTABLISHMENT'S hours of operation and other reasonable times. The Department or a local health department or public health services district to which the duty to comply with A.R.S. § 41-1009 has been delegated by the Department shall comply with A.R.S. § 41-1009 when performing inspections.

8-403.20 Specifying Time Frame for Corrections.

The REGULATORY AUTHORITY shall specify on the inspection report form the time frame for correction of the violations as specified under §§ 8-404.11, 8-405.11, and 8-406.11.

8-403.30 Issuing Report and Obtaining Acknowledgment of Receipt.

At the conclusion of the inspection and according to LAW, the REGULATORY AUTHORITY shall provide a copy of the completed inspection report and the notice to correct violations to the LICENSE HOLDER or to the PERSON IN CHARGE, and request a signed acknowledgment of receipt.

8-403.40 Refusal to Sign Acknowledgment.

The REGULATORY AUTHORITY shall:

(A) Inform a PERSON who declines to sign an acknowledgment of receipt of inspectional findings as specified in § 8-403.30 that:

(1) An acknowledgment of receipt is not an agreement with findings,

(2) Refusal to sign an acknowledgment of receipt will not affect the LICENSE HOLDER'S obligation to correct the violations noted in the inspection report within the time frames specified, and

(3) A refusal to sign an acknowledgment of receipt is noted in the inspection report and conveyed to the REGULATORY AUTHORITY'S historical record for the FOOD ESTABLISHMENT; and

181 (B) Make a final request that the PERSON IN CHARGE sign an acknowledgment receipt of inspectional findings.

8-403.50 Public Information.

The REGULATORY AUTHORITY shall treat the inspection report as a public document and shall make it available for disclosure to a PERSON who requests it as provided in LAW.

8-404.11 Ceasing Operations and Reporting.

Imminent Health (A) Except as specified in ¶ (B) of this section, a LICENSE HOLDER shall Hazard immediately discontinue operations and notify the REGULATORY AUTHORITY if an IMMINENT HEALTH HAZARD may exist because of an emergency such as a fire, flood, extended interruption of electrical or water service, SEWAGE backup, misuse of POISONOUS OR TOXIC MATERIALS, onset of an apparent foodborne illness outbreak, gross insanitary occurrence or condition, or other circumstance that may endanger public health.

(B) A LICENSE HOLDER need not discontinue operations in an area of an establishment that is unaffected by the IMMINENT HEALTH HAZARD.

8-404.12 Resumption of Operations.

If operations are discontinued as specified under § 8-404.11 or otherwise according to LAW, the LICENSE HOLDER shall obtain approval from the REGULATORY AUTHORITY before resuming operations. The REGULATORY AUTHORITY shall approve or deny resumption of operations within 5 days of the LICENSE HOLDER’S request to resume operations.

8-405.11 Timely Correction.

Critical (A) Except as specified in ¶ (B) of this section, a LICENSE HOLDER shall Violations at the time of inspection correct a critical violation of this Code and implement corrective actions for a HACCP PLAN provision that is not in compliance with its CRITICAL LIMIT.

(B) Considering the nature of the potential HAZARD involved and the complexity of the corrective action needed, the REGULATORY AUTHORITY may agree to or specify a longer time frame, not to

182 exceed 10 calendar days after the inspection, for the LICENSE HOLDER to correct critical Code violations or HACCP PLAN deviations. (C) The Department or a local health department or public health services district to which the duty to comply with A.R.S. § 41-1009 has been delegated by the Department shall not provide the LICENSE HOLDER an opportunity to correct critical Code violations or HACCP PLAN deviations after the date of inspection if the Department or the local health department or public health services district determines that the deficiencies are:

(1) Committed intentionally;

(2) Not correctable within a reasonable period of time;

(3) Evidence of a pattern of noncompliance; or

(4) A risk to any PERSON; the public health, safety, or welfare; or the environment.

(D) If the Department or a local health department or public health services district to which the duty to comply with A.R.S. § 41-1009 has been delegated by the Department allows the LICENSE HOLDER an opportunity to correct violations or deviations after the date of inspection, the Department, local health department, or public health services district shall inspect the FOOD ESTABLISHMENT within 24 hours after the deadline for correction has expired. If the Department, local health department, or public health services district determines that the violations or deviations have not been corrected, the Department, local health department, or public health services district may take any enforcement action authorized by LAW based upon those violations or deviations.

(E) A decision made under Subparagraph 8-405.11(C) or Subparagraph 8-405.11(D) by the Department or a local health department or public health services district to which the duty to comply with A.R.S. § 41-1009 has been delegated by the Department is not an appealable agency action, as defined by A.R.S. § 41-1092.

8-405.20 Verification and Documentation of Correction.

(A) After observing at the time of inspection a correction of a critical violation or deviation, the REGULATORY AUTHORITY shall enter the violation and information about the corrective action on the

183 inspection report.

(B) As specified under ¶ 8-405.11(B), after receiving notification that the LICENSE HOLDER has corrected a critical violation or HACCP PLAN deviation, or at the end of the specified period of time, the REGULATORY AUTHORITY shall verify correction of the violation, document the information on an inspection report, and enter the report in the REGULATORY AUTHORITY'S records.

8-406.11 Time Frame for Correction.

Noncritical (A) Except as specified in ¶ (B) of this section, the LICENSE HOLDER Violation shall correct noncritical violations by a date and time agreed to or specified by the REGULATORY AUTHORITY but no later than 90 calendar days after the inspection.

(B) The REGULATORY AUTHORITY may approve a compliance schedule that extends beyond the time limits specified under ¶ (A) of this section if a written schedule of compliance is submitted by the LICENSE HOLDER and no health HAZARD exists or will result from allowing an extended schedule for compliance.

R9-8-109. Cease and Desist and Abatement

A. Engaging in any practice in violation of this Article is a public nuisance.

B. If the REGULATORY AUTHORITY has reasonable cause to believe that any FOOD ESTABLISHMENT is creating or maintaining a nuisance, the REGULATORY AUTHORITY shall order the LICENSE HOLDER for the FOOD ESTABLISHMENT to cease and desist such activity and to abate the nuisance as follows:

1. The REGULATORY AUTHORITY shall serve upon the LICENSE HOLDER for the FOOD ESTABLISHMENT a written cease and desist and abatement order requiring the LICENSE HOLDER to cease and desist such activity and to remove the nuisance within 24 hours of receipt of the order at the LICENSE HOLDER’s expense. The order shall contain the following:

a. A reference to the statute or rule that is alleged to have been violated or on which the order is based,

184 b. A description of the LICENSE HOLDER’s right to request a hearing, and

c. A description of the LICENSE HOLDER’s right to request an informal settlement conference.

2. The REGULATORY AUTHORITY shall serve the order and any subsequent notices by personal delivery or certified mail, return receipt requested, to the LICENSE HOLDER’s or other party’s last address of record with the REGULATORY AUTHORITY or by any other method reasonably calculated to effect actual notice on the LICENSE HOLDER or other party.

3. The LICENSE HOLDER or another party whose rights were determined by the order may obtain a hearing to appeal the order by filing a written notice of appeal with the REGULATORY AUTHORITY within 30 days after receiving the order. The LICENSE HOLDER or other party appealing the order shall serve the notice of appeal upon the REGULATORY AUTHORITY by personal delivery or certified mail, return receipt requested, to the office of the REGULATORY AUTHORITY or by any other method reasonably calculated to effect actual notice on the REGULATORY AUTHORITY.

4. If a notice of appeal is timely filed, the REGULATORY AUTHORITY shall do 1 of the following:

a. If the REGULATORY AUTHORITY is the Department or a local health department or public health services district to which the duty to comply with A.R.S. Title 41, Chapter 6, Article 10 has been delegated, the notification and hearing shall comply with A.R.S. Title 41, Chapter 6, Article 10 and any rules promulgated by the Office of Administrative Hearings.

b. For all other regulatory authorities, the notification and hearing shall comply with the procedures adopted by a county board of supervisors as required by A.R.S. § 36- 183.04(E).

5. If no written notice of appeal is timely filed, the order shall become final without further proceedings.

C. The REGULATORY AUTHORITY shall inspect the FOOD

185 ESTABLISHMENT 24 hours after service of the order to determine whether the LICENSE HOLDER has complied with the order. If the REGULATORY AUTHORITY determines upon inspection that the LICENSE HOLDER has not ceased the activity and abated the nuisance, the REGULATORY AUTHORITY shall cause the nuisance to be removed, regardless of whether the LICENSE HOLDER is appealing the order.

D. If the LICENSE HOLDER fails or refuses to comply with the order after a hearing has upheld the order or after the time to appeal the order has expired, the REGULATORY AUTHORITY may file an action against the LICENSE HOLDER in the superior court of the county in which the violation occurred, requesting that a permanent injunction be issued to restrain the LICENSE HOLDER from engaging in further violations as described in the order.

186 This page is intended to be blank.

187