UF1 SERIES Table of Contents
Chapter 1 - Introduction Chapter 5 - Using More of Your TV Precautions...... 3 Setting up Your Favourite Channels...... 13 Warning...... 3 Energy Saving...... 13 Product...... 3 SPDIF Type...... 13 Power and Plug...... 3 Audio Description...... 13 Power Cord and Signal Cable...... 3 Diagnostics on Digital TV Channels...... 13 Use Environment...... 3 Using Subtitles...... 13 Cleaning...... 3 Using Teletext...... 14 Hanging the TV Set on the Wall...... 3 Software Update...... 14 Buttons on the TV...... 4 Changing to Shop or Home Mode...... 14 Initial Setup ...... 4 Reset Shop...... 14 Sockets...... 5 T-Link...... 14 Remote Control Functions...... 6 Time Shift...... 15 Using EPG (Electronic Programme Guide)...... 15 Chapter 2 - Getting Started PVR (Personal Video Recorder)...... 15 Switching On ...... 7 Network Waking up...... 16 Switching Off ...... 7 Password in Parental Control...... 16 Network Connection ...... 8 E-Manual...... 16 Connecting to a Wired Network ...... 8 Netflix Settings...... 16 Connecting to a Wireless Network ...... 8 T-CAST...... 16 Chapter 3 - Basic Operation Share & See...... 16 Accessing Channels ...... 9 HbbTV...... 17 Watching Connected Devices ...... 9 Freeview Plus...... 17 Adjusting Volume ...... 9 Using TV Settings...... 9 Chapter 6 - Other information Selecting Menu Language ...... 9 Problems and Solutions...... 18 Instant Power On ...... 9 Troubleshooting...... 19 Automatic Channel Search...... 9 Legal statement...... 20 Chapter 4 - Homepage Operation Licence ...... 20 Using Homepage-Home...... 10 Using Homepage-Videos ...... 11 Using Homepage-TV...... 11 Using Homepage-Apps...... 12
2 Chapter 1 Introduction Precautions and the cabinet has been damaged. • Where the mains plug or an appliance coupler is Read all of the instructions before operating the set. used as disconnect device, the disconnect device Keep these instructions well for future use. shall remain readily operable. Warning Power Cord and Signal Cable Never place a television set in an unstable location. A • Do not allow anything to rest on or roll over the power television set may fall, causing serious personal injury cord and the signal cable. or death. Many injuries, particularly to children, can be • Protect the power cord and the signal cable from avoided by taking simple precautions such as: being trampled. -- Using cabinets or stands recommended by the • Do not overload the power cord or the power outlet. manufacturer of the television set. • Do not expose the power cord and the signal cable to -- Only using furniture that can safely support the moisture. television set. -- Ensuring the television set is not overhanging the Use Environment edge of the supporting furniture. • Do not place the set on an unstable cart, stand, or -- Not placing the television set on tall furniture table. (for example, cupboards or bookcases) without • Place the set on a place that allows good ventilation. anchoring both the furniture and the television set to a suitable support. • Do not use the set near damp, and cold areas. -- Not placing the television set on cloth or other • Do not expose the set to excessive heat such as materials that may be located between the direct sunlight, fire, or the like and no naked flame television set and supporting furniture. sources, such as lighted candles, should be placed on the apparatus. -- Educating children about the dangers of climbing on furniture to reach the television set or its • Do not expose the set to dripping or splashing and controls. no objects filled with liquids, such as vases, shall be placed on the apparatus. If your existing television set is being retained and relocated, the same considerations as above should be • Do not use the set in dusty environments. applied. • Operating Temperature: 5°C to 35°C (41°F to 95°F) Operating Humidity: 20% to 80%, non-condensing Product Storage Temperature: -15°C to 45°C (5°F to 113°F) • Do not block or cover the ventilation openings on the Storage Humidity: 10% to 90%, non-condensing back cover. • Do not push objects of any kind into this unit through Cleaning the cabinet slots as they could touch the current carrying parts or short-circuit parts, resulting in fire, • Dust the set by wiping the screen and the cabinet electric shock, or damage to the unit. with a soft, clean cloth or some special liquid cleaner. • Do not attempt to open the cabinet as this may cause • Do not apply excessive force to the screen when damage. There are no parts inside you can service cleaning. by yourself. Refer all servicing to qualified personnel. • Do not use water or other chemical cleaner to clean • Do not touch the screen surface with fingers as this the screen as this may damage the surface of the TV may scratch or mar the TV screen. screen. • Do not impact the TV screen with hard pressure as Hanging the TV Set on the Wall this may damage the TV screen severely. Warning: This operation requires two people. • This appliance is not intended for use by young children or infirm persons without supervision. Young To ensure a safe installation, observe the following children should be supervised to ensure that they do safety notes: not play with the appliance. • Check that the wall can support the weight of the TV set and wall mount assembly. Power and Plug • Follow the mounting instructions provided with the • Unplug the set under the following conditions: wall mount. -- If the set will not be used for a long period of time. • The TV set must be installed on a vertical wall. -- If the power cord or the power outlet/plug is • Make sure to use only screws suitable for the damaged. material of the wall. -- Follow the instructions to install and adjust the • Make sure that the TV set cables are placed so that product. Adjust those controls that are covered in there is no danger of tripping over them. these operating instructions as improper adjustment All other safety instructions about our TV sets are also of other controls may result in damage. If this applicable here. Wall mount bracket not included. happens, unplug the set and refer to the service personnel. (Note: Certain TV models are not designed to be mounted to the wall.) -- If the set is subject to impact or has been dropped
3 Chapter 1 Introduction
Buttons on the TV
If the batteries in your remote control are run down, you can use the buttons on your TV set. They have the following functions:
For models with below buttons on the set: For models with below buttons on the set: TV mode In menus or /◄ P ▲ P ▼ or /► ► Features (Short press) ◄ or (Long press) Features (Long press) Features (Long press) OK (Short press) OK (Short press)
For models with only one button on the set:
or Power on/Standby
Note: Figures and illustrations are provided for reference only and may vary depending on the model.
Initial Setup The first time you switch the set on, theHello screen appears, which guides you through the initial setup process. Follow the on-screen instructions to finish the initial setup process such as selecting the language, connecting to the network, and more. During each step, either make a choice or skip the step. If you skip a step, you can perform the setup later from the settings menu. Note: if the channel search retrieved only the analogue channels it could be caused by poor broadcasting and therefore is not covered by manufacturer warranty. Manufacturers cannot be held responsible for lack of or poor broadcasting in some areas.
4 Chapter 1 Introduction Sockets Note: The location and names of the sockets on the TV may vary according to TV model, and not all sockets available on all models.
SPDIF socket (output) SPDIF The SPDIF socket can be used to connect a compatible digital audio receiver.
HDD USB2.0 or USB2.0/SERVICE socket (input) USB 2.0 or USB 2.0/ These USB sockets can be used to connect an USB device. SERVICE Note: the number of USB sockets on the TV may vary according to TV model.
HDMI or HDMI (ARC) socket (input) HDMI or The HDMI (High-Definition Multimedia Interface) socket can be used to HDMI connect a PC with a compatible video card installed, certain DVD players or (ARC) a high-definition compatible digital satellite decoder. This socket provides an uncompressed digital connection that carries both video and audio data by way of an integrated mini-plug cable. R R AV RCA audio + video sockets (input) R The AV IN sockets can be used to connect a range of equipment, including L L
AV IN L video recorders, camcorders, decoders, satellite receivers, DVD players, V V
VIDEO or games consoles. The VIDEO IN socket provides composite video R R or R connection. AV IN L L L adapter AV IN adapter socket V V V The AV IN adapter socket can be used to connect the attached AV adapter cable with VIDEO and AUDIO L & R IN sockets.
ANTENNA IN ANTENNA IN socket (input) This socket can be used to connect the outside aerial.
LAN RJ45 plug for connecting to external modem or network access equipment. LAN Router / Modem
Headphone socket (output) This socket can be used to connect headphones or stereo earphones. Note: When the Headphone socket is connected, the speakers will be muted. Warning: excessive sound pressure from earphones and headphones can cause hearing loss.
5 Chapter 1 Introduction Remote Control Functions Most of your television's functions are available via the menus that appear on the screen. The remote control supplied with your set can be used to navigate through the menus and to configure all the general settings. Note: Figures and illustrations in this operationC0 manualD5 are provided3F for reference2A only and may differ from actual product appearance. The remote control type may be changed without notice.
To switch the sound off and back on. CE CD CC 31 32 33 Standby / quit standby. Numeric CBbuttonsCA ToC9 enter channel34 numbers35 or36 a digit. PRE-CH To return to the previous channel in TV mode. LIST To display the channel list. C8 C7 C6 37 38 39 / To control the volume. To display programme information, if available. 21 CF 9E DE 30 61 To display the Settings menu. P / To change channels. D0 C3 D2 2F 3C 2D To access or exit the Smart TV homepage. To display the Option menu. D1 30 D3 2E CF 2C ▲/▼/◄/► Navigation direction buttons. OK To confirm an entry or selection. F7 A6 13 To return to the 08previous59 menuEC or quit an App. To select input source. A9 0B A8 EXIT To exit the Settings56 menu.F4 57 LANG To select a sound type available for selected analogue TV D8 A7 programme;5C to27 select 58an audioA3 language available for selected digital TV programme. F9 E1 GUIDE To toggle the Electronic06 Programme1E Guide on or off (only E5 available for digital channels).1A 20 7F DF 80 TEXT To toggle Teletext on or off. FF 1B SUBT.17 To27 select a subtitle00 languageE8 E4 availableD8 for selected digital TV programme. E2 E6 E3 Colour buttons To select tasks 1Dor Teletext19 pages;1C to be used for HbbTV
E8 EA function.E0 17 15 1F To start fast reverse. To pause playback. 10 To start fast forward. EF REC To record programs under DTV source. To start playback. To stop playback. NETFLIX To access the NETFLIX application. (Not available for some models.)
Installing Batteries 1. Push to open the back cover as illustrated. 2. Insert two AAA batteries according to the polarities marked on the battery case. 3. Replace the back cover as illustrated.
6 Chapter 2 Getting Started
Switching On Follow the instructions on this page on how to switch on your TV set and the remote control before going on to following pages describing how to use the channel set-up procedure.
1. Insert two AAA batteries in the remote control. Precautions on using batteries: - Only use the battery types specified. - Make sure you use the correct polarity. - Do not mix new and used batteries. - Do not use rechargeable batteries. - Do not expose batteries to excessive heat such as sunshine, fire or the like, throw them in a fire, recharge them or try to open them, as this could cause them to leak or explode. - Remove the batteries from the remote control if you are not using it for a long period of time. - Attention should be drawn to the environmental aspects of battery disposal.
2. Connect the power cable FIRST to the television, THEN to a mains socket. (Note: If the power cable is connected to the television, please only connect the power cable to the mains socket.) Your TV set should only be connected to an AC supply. It must not be connected to a DC supply. If the plug is detached from the cable, do not, under any circumstances, connect it to a mains socket, as there is a risk of electric shock. Note: The figures are for representation only, the location of power sock- et of the television might differ depend on the model.
3. Connect an outside aerial to the ANTENNA IN socket at the back of the TV set.
The aerial socket (75 OHM - VHF / UHF / cable) can be used for connecting an external aerial or other equipment fitted. Note: If you want to receive the signal from your cable or cable box, please connect a coaxial cable to the ANTENNA IN socket at the back of the TV set.
4. When powered on, the TV will be turned on directly or be in standby mode. If the power indicator lights up, the TV set is in standby mode. Press the button on the remote control or on the TV set to turn on the TV.
Switching Off To put the TV set into standby mode, press the button on the remote control. The TV set remains powered up, but with low energy consump- tion. To switch off the TV set, unplug the mains socket from the mains outlet.
7 Chapter 2 Getting Started
Network Connection Your TV will require an internet connection to operate all functions. Data usage charges may apply. Please refer to your Internet Service Provider (ISP) for additional information. To access the internet, you must subscribe high speed broadband internet service from your internet service provider. Your TV can be connected to your home network in two ways: • Wired, using the RJ45 (LAN) connector on the back panel. • Wireless, using the internal wireless or external wireless USB adapter and your home wireless network. Note: The following instructions are just the usual ways to connect your TV to the wired or wireless network. The connection method may be different depending on your actual network configuration. If you have any questions about your home network, please refer to your ISP(Internet Service Provider).
Connecting to a Wired Network Router To connect to a wired network: 1. Ensure you have: • An Ethernet cable long enough to reach your TV • A router or modem with an available Ethernet port • A high-speed internet connection Modem Internet • An Ethernet (LAN) port on the back of the TV 2. Connect your Ethernet cable to the router and to the LAN port Ethernet port on the back of the TV. 3. Use the Network Settings to configure the TV.
Connecting to a Wireless Network Modem Internet To connect to a wireless network 1. Ensure you have: • A router broadcasting a high-speed wireless signal • A high-speed internet connection 2. Use the Network Settings to configure the TV.
Wireless router
Note: press on the remote control, select Network and press OK/► to enter the Network menu.
8 Chapter 3 Basic Operation
Accessing Channels Selecting Menu Language Using the numeric buttons: press the You can choose your preferred menu language corresponding numeric buttons on the remote following the instructions below. control to access the channels. 1. Press on the remote control, select System > Using the P / buttons: press the P / buttons Menu language and press OK/► to enter. on the remote control or the corresponding buttons 2. Press ▲/▼ to select your desired language to on the TV set to scroll through the channels. display the menus and press OK to confirm. Using the LIST button: press the LIST button on 3. Press EXIT or to close the menu. the remote control to display the channel list and press ▲/▼/◄/► and OK to select channels. Instant Power On This function enables you to turn on your TV quickly. Watching Connected Devices 1. Press on the remote control, select System > Press (SOURCE) on the remote control to Advanced settings > Instant power on and dispaly the source list. Use ▲/▼ to toggle between press OK/► to enter. TV and other input sources, press OK to confirm. 2. Press ▲/▼ to select On and press OK to Or you can press P / to cycle through all TV confirm. channels and other input sources. 3. Press EXIT or to close the menu. Automatic Channel Search Adjusting Volume This section describes how to search and store Volume control: press the V+/- buttons or the ◄/► channels automatically. This may be done in any of on the remote control or the corresponding buttons the cases below: on the TV set to increase or decrease the volume. -- you have selected “Skip" in channel installation Sound mute: press the button to temporarily part when doing the initial setup; mute the sound. Press this button again or the V+ -- you see “No channels, please press OK key and button to restore the sound. scan!” in TV mode; -- you want to update your channels. Using TV Settings 1. In TV mode, press on the remote control and 1. Press on the remote control to display the select Channel > Channel scan. Press OK/► to Settings menu. enter. 2. The TV installs and arranges channels according to your country. Press ▲/▼ to select Country/ Region, and press OK/► to enter. Enter the default password 1234 or your own password in case you have changed the password in the System > Lock menu. Press ▲/▼ to select your country and press OK/► to confirm. 3. Press ▲/▼ to select Automatic search, then press OK/► to enter. 4. Press ▲/▼ to select Channel type (Digital & Analogue, Digital or Analogue), press ▲/▼ 2. Press ▲/▼ to select the desired item, then press to highlight Search, then press OK to start the OK/► to enter the corresponding submenu. automatic search for all digital and/or analogue 3. In submenus, press ▲/▼ to select menu options, channels. then press OK/► to enter the option list, the 5. The channel search may take a few minutes. adjustment interface, or the corresponding During the process, you can press OK to stop the submenu. search halfway. 4. Press to return to the previous menu. 6. After the automatic search, channels are 5. Press EXIT or to close the menu. arranged in a preset order. If you wish to skip Note: channels, modify the preset order, rename or You can also press on the remote control, delete channels, press on the remote control, select Settings (if available) and press OK to select Channel > Channel organiser and press enter the Settings menu. Some options may not OK/► to enter. be available for certain signal sources.
9 Chapter 4 Homepage Operation
Note: This manual is for common use. Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. And for some models, certain options are not available. You can select all the features from homepage. 1. Press to display homepage. 2. Press ▲/▼/◄/►to select icons from the screen list. 3. Press OK to enter each option. 4. To exit the menu, press EXIT or repeatedly. Homepage contains 4 parts: Home, Videos, TV, and Apps. Use ◄/► to switch among them. Shortcut: Press ▲ to move the cursor to the very top of the screen under any homepage, the (Source Manag- er) option will appear. You can access source menu directly here.
WARNING: • Configure the network settings before using Smart TV. • Slow responses and/or interruptions may occur, depending on your network conditions. • If you experience a problem using an application, please contact the content provider. • According to circumstances of the contents provider, an application’s updates or the application itself may be discontinued. • Depending on your country’s regulations, some applications may have limited service or not be supported.
Using Homepage - Home This section explores the most commonly used menu of your TV.
Press on the remote control to display the homepage. Press ▲/▼/◄/► to enter the Home page and select icons from the screen list. Press OK to enter each option. To exit the menu, press EXIT or repeatedly.
Status:
Search Recomandations
Netflix
Recent
Recent: This page shows your recently viewed programmes. To delete the history, press to display the submenu, choose Delete one/ Delete all and operate according to screen display.
Search: You can search for your desired programmes using the virtual keyboard.
Netflix:With a Netflix unlimited membership, you can instantly watch TV episodes & movies streamed over the Internet watch TV episodes & movies streamed over the Internet from Netflix right to your TV.
Note: Netflix is available in certain countries. Unlimited membership required. More information at www.netflix.com.
10 Chapter 4 Homepage Operation
Using Homepage - Videos Note: The information displayed will be updated periodically. Press on the remote control to display the homepage. Press ▲/▼/◄/► to enter the Videos page and select icons from the screen list. Press OK to enter each content To exit the menu, press EXIT or repeatedly. This interface enables you to search for videos by genre, such as movie, sport, music, popular, news, education, and game, etc. For details, refer to your local platform.
Using Homepage- TV Note: Some options may not be available for certain signal sources.
This section explores the input sources of your TV. Press on the remote control to display homepage. Press ▲/▼/◄/► to enter TV page and select input source you want from the screen list, then press OK to confirm. To exit TV page,press EXIT or repeatedly.
Input Source
TV window Displays the current selected TV broadcast programme. Input Source Select the input source from devices connected to TV through different ports, including TV, AV, HDMI1, HDMI2, and Media. Press ▲/▼/◄/► to select your desired source, and then press OK to confirm. Note: The available source might differ depending on the model.
11 Chapter 4 Homepage Operation
Using Homepage- Apps Note: The pre-installed apps or items can not be deleted. And the apps (regardless of order) listed in the below figure may differ from actual product. For some models, certain apps are not available.
Press on the remote control to display the homepage. Press ▲/▼/◄/► to enter the Apps page and select icons from the screen list. Press OK to enter each option. Press EXIT or repeatedly to return to the homepage.
Pre-installed apps App Store
App Store: Many useful and entertaining apps are available for downloading. After entering the App Store, you will see the recommendations. Press ▲/▼/◄/► to select, press OK to enter. Pre-installed apps: These are recommended Apps. Highlight an app and press OK to open it. Note: The pre-installed apps or items can not be deleted. Note: You may need a webcam to use certain apps. The webcam is an optional accessory, and is available by separate purchase. Only use the specified webcam. Some external devices like webcam, smartphone and joystick may not be supported.
12 Chapter 5 Using More of Your TV
Setting up Your Favourite Channels Audio Description You can create a list of your favourite TV channels. Audio description refers to an additional narration 1. Press LIST. track for blind and visually impaired viewers of visual 2. Press ▲/▼/◄/► to scroll through the channel list media, including television programmes and movies. and press the green button to add the selected The description narrator talks through the channel to your favourite list. presentation describing what is happening on the 3. Repeat this procedure to set up other favourite screen during the natural pauses in the audio (and channels. during dialogue if deemed necessary). 4. Press ▲/▼/◄/► to select a channel, press OK You can use this feature if the current broadcast to watch it or press the green button to remove it contains audio description. from your favourite list. 1. Press on the remote control, select Sound > 5. Press to orgnize the channels. Use ▲/▼/◄/► Advanced settings > Audio description and to select a channel, then press the green button press OK/► to enter. to remove or add it to your favourite channels. 2. Select Speaker, Headphone or BT device, Or press OK button to do more operations such press OK/► to enter, press ◄/► to select Audio as swap, insert, hide, edit or delete the selected description and press OK to confirm.（Note: BT channel. device is only available in selected products with 6. Press LIST or EXIT to exit. Bluetooth module.) 3. To adjust the volume for audio description in case Energy Saving this function is turned on, press ▲/▼ to select 1. Press on the remote control, select Picture > AD volume, press OK/► then press ◄/► to set Advanced settings > Dynamic backlight and the volume. Press to return. press OK/► to enter. 4. Press EXIT or to close the menu. 2. Press ▲/▼ to select On to activate power saving mode. Diagnostics on Digital TV Channels 3. Press EXIT or to close the menu. 1. Press on the remote control and select Channel > Channel diagnostics. SPDIF Type 2. Press OK/► to display some signal information Connect the TV to an audio device through the on the current digital channel, such as signal SPDIF output. To select a proper sound type for strength, frequency, etc. your SPDIF output, press on the remote control, 3. Press OK to confirm. select Sound > Advanced settings >SPDIF type 4. Press EXIT or to close the menu. and press OK/► to enter. Press ▲/▼ to select an option and press OK to confirm. Using Subtitles -- If you select Auto, the SPDIF output format is You can enable subtitles for each TV channel. • Dolby Digital when the programme’s sound format Subtitles are broadcast via Teletext or DVB-T digital is Dolby Digital or Dolby Digital Plus or HE-AAC. broadcasts. With digital broadcasts, you have the • PCM when the programme’s sound format is additional option of selecting a preferred subtitle MPEG. language. -- If you select PCM, the SPDIF output format is Turning On/Off Subtitles PCM, regardless of the programme’s sound format. 1. Press on the remote control, select Channel > -- If you select Off, this turns off the audio output Subtitle and press OK/► to enter. from the audio device connected to the SPDIF 2. Select the Subtitle option, press OK/► to enter, output. press ▲/▼ to select On or Off and press OK to Note: The options you may choose depend on confirm. the programme you are watching. If the 3. Press EXIT or to close the menu. sound is ahead of the picture, you can Turn on the subtitle before doing below operations. select SPDIF delay from the Sound menu, Enabling Subtitle Languages on Digital TV press OK/► then press ◄/► to adjust the Channels delay time to synchronize the sound with the picture. 1. Press on the remote control, select Channel > Subtitle > Digital subtitle language 1st and press OK/► to enter.
13 Chapter 5 Using More of Your TV
2. Press ▲/▼ to select a subtitle language as your USB socket of the set. Select By USB and press preferred language and press OK to confirm. OK/► to enter. Follow the on-screen instructions 3. Press ▲/▼ to select 2nd Digital subtitle to complete the process. language and press OK/► to enter. -- By channel: Enables you to install the latest 4. Press ▲/▼ to select a secondary subtitle version software if available from the broadcast. language and press OK to confirm. Select By channel and press OK/► to enter. 5. Press EXIT or to close the menu. Follow the on-screen instructions to complete the Shortcut operation: Press SUBT. on the remote process. control to directly select a subtitle language available -- By network: Enables you to download and install for the selected digital TV programme. the latest version software from the Internet. Make sure to set up a wired or wireless network Selecting a Subtitle Type on Digital TV Channels connection first then select By network and press 6. Press on the remote control, select Channel > OK/► to enter. Follow the on-screen instructions Subtitle > Subtitle type and press OK/► to to complete the process. enter. Note: Do not disconnect power and network 7. Press ▲/▼ to select a subtitle type and press connection during the upgrade. OK to confirm. You can select Hearing Impaired to display the hearing impaired subtitles with your Changing to Shop or Home Mode selected language. 1. Press on the remote control, select System > 8. Press EXIT or to close the menu. Environment and press OK/► to enter. Press to select , or Using Teletext 2. ▲/▼ Home Shop Shop with demo and press OK to confirm. Selecting Decoding Page Language 3. Press EXIT or to close the menu. Note: If Shop or Shop with demo mode was 1. Press on the remote control, select Channel > selected, it is not MEPS compliant. In Home Teletext > Decoding page language and press mode, TV will be put into standby mode OK/► to enter. automatically if there is no operation in 4 hours 2. Press ▲/▼ to select a proper type of language when this feature is activated to ON in the in which Teletext will display and press OK to System > Timer > Auto standby menu. confirm. 3. Press EXIT or to close the menu. Reset shop Digital Teletext Language Allows you to reset the TV to factory default settings. On digital TV channels, depending on the 1. Press on the remote control, select Support > broadcaster, you may be able to enjoy a service with Reset shop and press OK/► to enter. multiple initial Teletext pages in different languages. 2. Use the numeric buttons to enter the password This function allows you to select an available 1234 or your own password incase you have language as primary language, which relates to changed the password. different initial Teletext pages. 3. Press ◄/► to select OK and press OK to 1. Press on the remote control, select Channel > confirm. Teletext > Digital teletext language and press 4. The Initial setup wizard appears. Follow the OK/► to enter. instructions in the section Initial setup. 2. Press ▲/▼ to select a language and press OK to confirm. T-Link 3. Press EXIT or to close the menu. Use this function to search for CEC devices connected to the HDMI sockets in your TV and enable Software Update one-touch play and one-touch standby between CEC Note: Do not switch off or unplug the TV until the devices. upgrade is completed. Enabling or Disabling T-Link Press on the remote control, select Support > Software update and press OK/► to enter. You 1. Press on the remote control, press ▲/▼ to have the following options to update the software. select T-Link and press OK/► to enter. 2. Press ▲/▼ to select T-Link and press OK/► to -- By USB: Enables you to install a new version enter. software from a USB stick. Insert the USB stick 3. Press ◄/► to select On or Off and press OK to in which a new version software is stored into a confirm.
14 Chapter 5 Using More of Your TV
4. Press EXIT to close the menu. Using EPG (Electronic Programme Guide) Using Auto Power On EPG is an on-screen guide that displays scheduled Enables the TV to automatically power on when you digital TV programmes. You can navigate, select, power on a CEC device (e.g. DVD) with the device’s view and record programmes. remote. Select On to enable this function. Note: The DTV EPG does not require an internet Using Auto Standby connection. To use the DTV EPG, HbbTV must be set to Off. when HbbTV is set to On, then it will enter the Enables all CEC devices to automatically go to the HbbTV EPG directly. Please refer to “HbbTV” part of standby mode when you turn off the TV with the TV this manual for assistance to set HbbTV to on or off . remote. Select On to enable this function. 1. Press on the remote control, select Channel > Note: The CEC functions depend on the EPG and press OK/► to enter, or press GUIDE devices connected and it is possible on the remote control, the Program Guide menu that some devices may not interoperate will appear, which allows you to get information correctly when connected to this TV. The about the current or next programme playing user manual or the manufacturer of the on each channel. Navigate through the different problematic devices should be consulted programmes using the ▲/▼/◄/► buttons on the for further information. remote control. 2. Use the related buttons shown at the bottom of Time Shift the screen to view EPG. Allows you to pause, fast forward and rewind live TV, -- More: Press OK to view more information. so you don’t have to miss any part of your favourite -- Program filter: Press to display programme programs. Before you use the function, connect filter for digital TV programmes. a USB drive to the TV first. For the first time, you -- Custom schedule: Press the red button to set should complete the disk setup for the USB drive. a schedule. 1. Press on the remote control and select Time -- Select date: Press the green button and OK to Shift, then press OK to confirm. select date. 2. Follow the directions on the screen to do the disk -- Schedule list: Press the yellow button to view setup if you use time shift for the first time. your schedule list. 3. After the disk setup is done, time shift will start, 3. Press GUIDE or EXIT to exit EPG. and the time shift menu displays on the screen. 4. For later use, press and select Time Shift. PVR (Personal Video Recorder) press OK to display the time shift menu and Allows you to record your favourite TV programs. operate according to the on-screen prompt. Before you use the function, connect a USB drive to 5. Pressing Stop button stops the time shift and the TV first. exits. Note: The feature is available only in selected -- When the time shift menu disappears and products and, due to specific TV network limitations only the timing of the time shift remains on the and country technical requirements, might not screen, you can press to call out be available in product or place of installation. the time shift menu. Feature might also be blocked by TV network due Notes: to copyright protection (HD content, recording -- Before you plug the USB drive to TV, make protection). Please use on the remote control to sure you have backed up the data on the drive check if the feature is available in your product. to avoid unforeseen malfunction and data loss. -- We recommend that you use a USB drive with 1. Press on the remote control and select PVR. at least 1GB free space and a disk speed faster 2. Press OK/► to enter and select Record. It starts than 5.0MB/sec. to record automatically. -- The bigger the USB drive free space for time 3. Press BLUE button on the remote control to shift, the bigger the recording length. access Settings and use ▲/▼/◄/► to adjust the recording duration. Quick Access of Time Shift: 4. Press to stop recording manually, the Insert a USB disk, press PAUSE( ) on the remote recorded file will be saved. In normal operation, control, it will access Time Shift automatically. the recording will stop automatically when the recording duration expires. 5. In recording, the PVR mini pane will also show on the screen to indicate the recording progress.
15 Chapter 5 Using More of Your TV
6. To watch the recorded program, exit PVR mode 2. Press ◄/► to select the contents and press OK first,Press and go to TV > Media > PVR, then to enter, then press ▲/▼ to view the instruction select the related record file. Press OK to play. (It pages. Press to return to the contents. is the same if you record a digital radio program). 3. Press EXIT to exit. Notes: - This feature is available only for digital non Netflix Settings encrypted channels. Netflix provides on-demand movies and TV shows - Before you connect the USB drive to the TV, delivered via the Internet. Netflix is available in make sure you have backed up the data in the certain countries.Unlimited membership is required. drive to avoid the loss of your important data due to More information can be found at www.netflix.com unforeseen malfunction.
16 Chapter 5 Using More of Your TV
Share&See application 3. When you tune to a TV digital channel that offers Select Media from the homepage and press OK to HbbTV, this will be signalled to you by an on- enter. Then you can view pictures, listen to music or screen indication (generally a red button, but watch videos, which are stored on your PC. other colour buttons may also be used). Press the indicated colour button to open the interactive Supported file formats: pages. Picture JPEG, PNG, BMP 4. Use ▲/▼/◄/► and the colour buttons to Music MP3, WMA, LPCM navigate through the HbbTV pages and press OK Video FLV, TS, MP4 to confirm. Notes: HbbTV deactivation -- Share&See function is set to on by default, To avoid disturbances that may be caused by the TV will display the list of available DLNA HbbTV broadcasting tests, you can turn off the servers which are available in local network. HbbTV function: -- Content from third-party DLNA servers may not 1. Press on the remote control, select System > play correctly on your TV due to compatibility HbbTV and press OK/► to enter. problems. 2. Press ▲/▼ to select Off and press OK to -- When sharing media files from a PC, certain confirm. features may be unavailable and, due to the file and encoding formats used, playback issues Freeview Plus may occur. FreeviewPlus is a new television service which -- Because of network related conditions, provide a state of the art EPG and seamless access playback of media files may not be error-free. to Catch Up TV from free-to-air networks with the When this happens, play them from a USB simple press of a button. FreeviewPlus provides an drive. unrivalled user experience and places free to air television at the forefront of innovation, with services HbbTV that include: HbbTV (Hybrid broadcast broadband TV) is a -A 7-day, easy-to-use EPG service offered by certain broadcasters and available -All available Catch Up TV on the TV screen only on some digital TV channels. HbbTV delivers -Featured recommendations interactive television over broadband Internet. These interactive features are added to and enrich the -Ability to browse by genre and search normal digital programmes, and include services programmes for the next 7 days such as digital teletext, electronic programme -A favourite function with reminders for live and guide, games, voting, specific information related Catch Up programmes to the current programme, interactive advertising, What you need information magazines, catch-up TV, etc. You need a high-speed (broadband) internet To use HbbTV please ensure your TV is connected connection to the TV. to Internet and HbbTV is switched on. To launch Freeview Plus Notes: When you are watching TV, you will briefly see HbbTV services are broadcast- or country- a prompt at the top left of the screen. Press the dependent and may be unavailable in your area. corresponding colour key on the remote control You cannot download files to your TV with to launch FreeviewPlus. Follow the on-screen HbbTV function. instructions and use the colour keys, arrow keys, Application provider or broadcasting related and OK button to navigate. conditions may cause an HbbTV application to FreeviewPlus uses HbbTV technology which be unavailable momentarily. * combines broadcast and broadband. Internet To access HbbTV applications you must connection is required. Data usage and conditions connect your TV to the Internet via a broadband apply. link. HbbTV applications may not work correctly in case of network related issues. **FreeviewPlus is available through out Austrilia but Catch Up services vary by region – please check HbbTV access www.freeview.com.au to see what’s available in your 1. Press on the remote control, select System > area. HbbTV Settings and press OK/► to enter. ***More information about FreeviewPlus can be Press to select and set it to . 2. ▲/▼ HbbTV On found on www.freeview.com.au.
17 Chapter 6 Other Information
Problems & Solutions Note: Problems & solutions 1 to 2 are for the TV models which have network functions, so users of non-connected TV models can disregard them.
1. Fail to link to the network. 5. Some videos fail to play. - Check if your TV is connected with the network; - The formats of the videos may not be supported by the - Reboot your TV; TV, especially videos shot by certain kinds of cameras, - Consult your internet service provider, to confirm generally with their private protocol of formats, which are if access of your router is supported. Refer to the not compatible with your TV. operation manual of your router. - Make sure if your TV is connected with the router. if the 6. Video stops playing midway. router is well connected and powered on, try to change a new router and network line, and use your PC to have - Mistakes may occur when videos are copied or a test. Should your problem persists, try to consult Client compressed, so they may automatically stop playing Service Centre. during playback.
2. The video could not be played smoothly. 7. What should I pay attention to, when I do SW updating - Videos from your USB flash drive --- It may result from data transmission, or its code flow is far beyond the - No power cuts when SW updating; supported formats of this TV set. - Avoid any operations with your remote control when SW updating; - Videos downloaded from internet, or online videos. - Be patient because the SW updating process may a. It may be caused by the lower bandwidth of your takes a little bit longer time. network. A high network speed is required to handle online videos. b. Peak internet usage times may affect the bandwidth. 8. There are no distinct changes of TV interface after c. Check if any other computers on the same SW updating. network are also operating, as they may be using - Under certain conditions, SW updating may not only up bandwidth. Especially if they are downloading or update or add new functions but also improve the displaying on-line videos. performance of the TV set, without distinct changes of d. The video may not be smooth itself, it is not the interface. Also, there may be no changes to the user problem of your TV or network. interface at all.
3. When two mobile hard disks are connected with the TV at the same time, they will not be recognized 9. External device cannot be recognized some times. - Some external devices (e.g. webcam, smart phone, - All mobile hard disks consume a lot of power, which tablet, game handle, and external wireless adapter) may may result in power supply problems. We recommend not be compatible with the TV and cannot be supported inserting only one hard disk, or a low power consumption for certain functions (nScreen, wireless display, gesture mobile hard disk. control, face recognition, if any). Please try a similar device. If it does not work, contact your local dealer.
4. The video from a mobile hard disk (USB) is playing with no sound. - The audio format of the video in your mobile hard disk is not supported by the TV player.
18 Chapter 6 Other Information
Troubleshooting
Note: Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list.
No picture, no sound Snowy dots and interference 1. Check if the fuse or circuit breaker is working. If the antenna is located in the fringe area of a television 2. Plug another electrical device into the outlet to make signal where the signal is weak, the picture may be sure it is working or turned on. marred by dots. When the signal is extremely weak, it 3. Power plug is in a bad contact with the outlet. may be necessary to install a special antenna to improve 4. Check the signal source. the reception. 1. Adjust the position and orientation of the indoor/ No color outdoor antenna. 1. Change the color system. 2. Check the connection of antenna. 2. Adjust the saturation. 3. Fine tune the channel. 3. Try another channel. Black-white programme may be 4. Try another channel. Broadcasting failure may received. happen. Remote control does not work Ignition 1. Change the batteries. Black spots or horizontal streaks appear, or the picture 2. Batteries are not installed correctly. flutters or drifts. This is usually caused by interference from car ignition system, neon lamps, electric drills, or No picture, normal sound other electrical appliance. 1. Adjust the brightness and contrast. 2. Broadcasting failure may happen. Ghost Ghosts are caused by the television signal following two Normal picture, no sound paths. One is the direct path, the other is reflected from 1. Press button►to increase volume. tall buildings, hills, or other objects. Changing the 2. Volume is set to mute, press the Mute button to direction or position of the antenna may improve the restore sound. reception. 3. Change the sound system. 4. Broadcasting failure may happen. Radio frequency interference This interference produces moving ripples or diagonal Unorderly ripples on the picture streaks, and in some case, loss of contrast in the picture. It is usually caused by local interference, such as cars, Find out and remove the radio interference source. daylight lamps and hair driers. Adjust the antenna to minimize the interference.
* To bring you better visual experience, please remove all labels, if any, from TV front panel and screen before use.
* Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
19 Chapter 6 Other Information Legal Statement
[Legal Statement] of manufacturer of this TV set Third party services may be changed, suspended, removed, terminated or interrupted, or access may be Due to the various capabilities of products featuring disabled at any time, without notice, and manufacturer the SmartTV - Services, as well as limitations in the makes no representation or warranty that any content available content, certain features, applications, and or service will remain available for any period of time. services may not be available on all devices or in all Content and services are transmitted by third parties territories. Some features on SmartTV may also require by means of networks and transmission facilities over additional peripheral devices or membership fees that which manufacturer has no control. Without limiting the are sold separately. Please visit our website for more generality of this disclaimer, manufacturer expressly information on specific device information and content disclaims any responsibility or liability for any change, availability. The services and availability of content interruption, disabling, removal of or suspension of any through SmartTV are subject to change from time to content or service made available through this device. time without prior notice. Manufacturer may impose limits on the use of or access to certain services or content, in any case and without All content and services accessible through this device notice or liability. Manufacturer is neither responsible nor belong to third parties and are protected by copyright, liable for customer service related to the content and patent, trademark and/or other intellectual property services. Any question or request for service relating to laws. Such content and services are provided solely the content or services should be made directly to the for your personal noncommercial use. You may not respective content and service providers. use any content or services in a manner that has not been authorized by the content owner or service provider. Without limiting the foregoing, unless expressly Licence authorized by the applicable content owner or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any content or services displayed through this device. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing Administrator, You expressly acknowledge and agree that use of the Inc. device is at your sole risk and that the entire risk as to satisfactory quality, performance and accuracy is with you. The device and all third party content and services are provided “as is” without warranty of any kind, either Manufactured under license from Dolby Laboratories. express or implied. Manufacturer expressly disclaims all Dolby, Dolby Audio, and the double-D symbol are warranties and conditions with respect to the device and trademarks of Dolby Laboratories. any content and services, either express or, implied, including but not limited to, warranties of merchantability, of satisfactory quality, fitness for a particular purpose, of accuracy, of quiet enjoyment, and non-infringement of third party rights. Manufacturer does not guarantee the accuracy, validity, timeliness, legality, or completeness HEVC, or H.265 is the successor to H.264 and strives to of any content or service made available through this deliver video with equivalent quality with bitrate savings device and does not warrant that the device, content or of up to 50 percent. HEVC is critical for streaming high- services will meet your requirements, or that operation quality video even in congested network environments, of the device or services will be uninterrupted or error- and will be a driving factor in the delivery of 4K content free. Under no circumstances, including negligence, to new Ultra HD displays. shall manufacturer be liable, whether in contract or tort, for any direct, indirect, incidental, special or consequential damages, attorney fees, expenses, or any other damages arising out of, or in connection with, any information contained in, or as a result of the use of the device, or any content or service accessed by you or Freeview Plus uses HbbTV technology which combines any third party, even if advised of the possibility of such broadcast and broadband. Internet connection is damages. required. Data usage charges and conditions apply.
20 www.ffalcon.com.au
Customer Support:1300 170 540
72-MS86LC-EAU1A