DOCSLIB.ORG

Thermec'2018 Conference Program

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Thermec'2018 Conference Program THERMEC’2018 International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications July 9-13, 2018 Paris, FRANCE CONFERENCE PROGRAM IMPORTANT REQUEST TO THERMEC‘2018 PARTICIPANTS THERMEC LUNCHEON GROUP A, B and C & TIMINGS FOR EACH GROUP The dining hall ( au LOFT, where luncheon on Monday, Tuesday, Wednesday & Thursday ) at this venue has maximum sitting capacity of 550 persons. Due to safety reasons, it is important that not more than 550 persons take luncheon at a time. We request your cooperation in this matter. LUNCHEON TIMES FOR GROUPS ARE: GROUP-A (Last Names : A to H ) 12h00 to 12h40 GROUP-B (Last Names : I to P ) 12h40 to 13h20 GROUP-C (Last names : Q to Z ) 13h20 to 14h00 We would appreciate if you please observe above arrangement in order to avoid overcrowding in the dining hall & area THERMEC’2018 INTERNATIONAL CONFERENCE on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS July 09- 13, 2018 Cité des Sciences et de l’industrie, 30 Avenue Corentin Cariou, 75019 Paris, France CONFERENCE PROGRAM Intl’ Conf. on Processing & Manufacturing of Advanced Materials July 9 – 13, 2018, Paris, France Contents General Information ……………………………………………………………………………………….…...1 Acknowledgements …………………………………………………………………………………… ……….6 Inaugural Session ……………………………………………………………………………………. ……….14 Sessions Matrix…………………………………………………………………………………………………15 Session A – Room : Louis Armand Est SESSION A1 : Advanced Steels & TMP Micro-alloyed Steels 1…………………………………………........17 SESSION A2 : Advanced Steels & TMP Micro-alloyed Steels 2…………………………………………........18 SESSION A3 : Advanced Steels & TMP Micro-alloyed Steels 3…………………………………………........20 SESSION A4 : Advanced Steels & TMP Micro-alloyed Steels 4…………………………………………........22 SESSION A5 : Advanced Steels & TMP Micro-alloyed Steels 5…………………………………………........24 SESSION A6 : Advanced Steels & TMP Micro-alloyed Steels 6…………………………………………........26 SESSION A7 : Advanced Steels & TMP Micro-alloyed Steels 7…………………………………………........28 SESSION A8 : Advanced Steels & TMP Micro-alloyed Steels 8…………………………………………........30 SESSION A9 : Composites 3…………………………………………...............................................................32 Session B – Room : Louis Armand West SESSION B1 : High & Ultra-high Temperature Materials 1…………...............................................................35 SESSION B2 : High & Ultra-high Temperature Materials 2…………...............................................................37 SESSION B3 : High & Ultra-high Temperature Materials 3…………...............................................................39 SESSION B4 : High & Ultra-high Temperature Materials 4…………...............................................................41 SESSION B5 : Smart/Intelligent Materials 1………….......................................................................................43 SESSION B6 : Smart/Intelligent Materials 2………….......................................................................................45 SESSION B7 : Smart/Intelligent Materials 3………….......................................................................................47 SESSION B8 : Composites 1…………................................................................................................................49 SESSION B9 : Composites 2…………................................................................................................................51 Session C – Room : 1 SESSION C1 : Neutron and X-ray Studies of Materials 1………….................................................................. 54 SESSION C2 : Neutron and X-ray Studies of Materials 2………….................................................................. 55 SESSION C3 : Neutron and X-ray Studies of Materials 3………….................................................................. 57 SESSION C4 : Aluminum Alloys 1………….................................................................................................... 59 SESSION C5 : Aluminum Alloys 2………….................................................................................................... 61 SESSION C6 : Aluminum Alloys 3………….................................................................................................... 63 SESSION C7 : Aluminum Alloys 4………….................................................................................................... 65 SESSION C8 : Aluminum Alloys 5………….................................................................................................... 67 SESSION C9 : Aluminum Alloys 6………….................................................................................................... 69 Session D – Room : 2 SESSION D1 : Advanced Protective Coatings & Surface Engineering 1…………............................................71 SESSION D2 : Advanced Protective Coatings & Surface Engineering 2…………............................................73 SESSION D3 : Advanced Protective Coatings & Surface Engineering 3…………............................................75 SESSION D4 : Advanced Protective Coatings & Surface Engineering 4…………............................................77 SESSION D5 : Ti Alloys & Aerospace Structural Metallic Materials 1…………..............................................79 SESSION D6 : Ti Alloys & Aerospace Structural Metallic Materials 2…………..............................................81 SESSION D7 : Ti Alloys & Aerospace Structural Metallic Materials 3…………..............................................83 SESSION D8 : Ti Alloys & Aerospace Structural Metallic Materials 4…………..............................................85 Session E – Room : 3 SESSION E1 : Fuel Cells, H2 Storage Technologies, Batteries, Supercapacitors 1 ............................................88 SESSION E2 : Fuel Cells, H2 Storage Technologies, Batteries, Supercapacitors 2.............................................89 SESSION E3 : Fuel Cells, H2 Storage Technologies, Batteries, Supercapacitors 3.............................................91 SESSION E4 : Fuel Cells, H2 Storage Technologies, Batteries, Supercapacitors 4.............................................93 SESSION E5 : Additive Manufacturing 1 – Non Beam & Solid State Topics....................................................95 SESSION E6 : Additive Manufacturing 2 – Beam Topics...................................................................................97 Intl’ Conf. on Processing & Manufacturing of Advanced Materials July 9 – 13, 2018, Paris, France SESSION E7 : Additive Manufacturing 3 – Beam Topics...................................................................................99 SESSION E8 : Additive Manufacturing 4 – Beam Topics.................................................................................101 SESSION E9 : Additive Manufacturing 5 – Beam Topics.................................................................................103 Session F – Room : 4 SESSION F1 : Interfaces, Grain boundaries & Structural Characterization 1...................................................105 SESSION F2 : Interfaces, Grain boundaries & Structural Characterization 2...................................................107 SESSION F3 : Interfaces, Grain boundaries & Structural Characterization 3...................................................109 SESSION F4 : Interfaces, Grain boundaries & Structural Characterization 4...................................................111 SESSION F5 : Integrated computational Grain Boundary Engineering 1.........................................................113 SESSION F6 : Advanced Steels & TMP Micro-alloyed Steels 9......................................................................115 SESSION F7 : Advanced Steels & TMP Micro-alloyed Steels 10....................................................................117 SESSION F8 : Advanced Materials for Bioengineering Applications 1............................................................119 SESSION F9 : Advanced Materials for Bioengineering Applications 2............................................................121 Session G – Room : A/B SESSION G1 : Metallic Glasses & Metallic Amorphous Materials 1...............................................................124 SESSION G2 : Metallic Glasses & Metallic Amorphous Materials 2...............................................................125 SESSION G3 : Materials Under Extreme Conditions 1.....................................................................................128 SESSION G4 : Materials Under Extreme Conditions 2.....................................................................................130 SESSION G5 : Materials Under Extreme Conditions 3.....................................................................................132 SESSION G6 : Materials & Technologies for Fusion 1 ....................................................................................133 SESSION G7 : Welding & Joining of Advanced Materials 1............................................................................135 SESSION G8 : Welding & Joining of Advanced Materials 2............................................................................137 SESSION G9 : Welding & Joining of Advanced Materials 3............................................................................139 Session H – Room : C/D SESSION H1 : High Entropy Alloys 1...............................................................................................................142 SESSION H2 : High Entropy Alloys 2...............................................................................................................144
Load more

Recommended publications
  • The Use of Titanium in Dentistry
    Cells and Materials Volume 5 Number 2 Article 9 1995 The Use of Titanium in Dentistry Toru Okabe Baylor College of Dentistry, Dallas Hakon Hero Scandinavian Institute of Dental Materials, Haslum Follow this and additional works at: https://digitalcommons.usu.edu/cellsandmaterials Part of the Dentistry Commons Recommended Citation Okabe, Toru and Hero, Hakon (1995) "The Use of Titanium in Dentistry," Cells and Materials: Vol. 5 : No. 2 , Article 9. Available at: https://digitalcommons.usu.edu/cellsandmaterials/vol5/iss2/9 This Article is brought to you for free and open access by the Western Dairy Center at DigitalCommons@USU. It has been accepted for inclusion in Cells and Materials by an authorized administrator of DigitalCommons@USU. For more information, please contact [email protected]. Cells and Materials, Vol. 5, No. 2, 1995 (Pages 211-230) 1051-6794/95$5 0 00 + 0 25 Scanning Microscopy International, Chicago (AMF O'Hare), IL 60666 USA THE USE OF TITANIUM IN DENTISTRY Toru Okabe• and HAkon Hem1 Baylor College of Dentistry, Dallas, TX, USA 1Scandinavian Institute of Dental Materials (NIOM), Haslum, Norway (Received for publication August 8, 1994 and in revised form September 6, 1995) Abstract Introduction The aerospace, energy, and chemical industries have Compared to the metals and alloys commonly used benefitted from favorable applications of titanium and for many years for various industrial applications, tita­ titanium alloys since the 1950's. Only about 15 years nium is a rather "new" metal. Before the success of the ago, researchers began investigating titanium as a mate­ Kroll process in 1938, no commercially feasible way to rial with the potential for various uses in the dental field, produce pure titanium had been found.
    [Show full text]
  • LEE-DISSERTATION-2018.Pdf
    Copyright by Kyung Sun Lee 2018 The Dissertation Committee for Kyung Sun Lee Certifies that this is the approved version of the following Dissertation: Doing Good or Looking Good? Communicating Development, Branding Nation in South Korea Committee: Karin G. Wilkins, Supervisor Joseph Straubhaar Sharon Strover Robert Oppenheim James Pamment Doing Good or Looking Good? Communicating Development, Branding Nation in South Korea by Kyung Sun Lee Dissertation Presented to the Faculty of the Graduate School of The University of Texas at Austin in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy The University of Texas at Austin December, 2018 Dedication To my dad, who inspired me to pursue the life of a scholar. Our time together was far too short, but you live on in my heart. Acknowledgements In the course of my dissertation journey, I have benefitted from many people and institutions to whom I would like to express my sincere gratitude. My utmost gratitude goes to my supervisor, Dr. Karin Wilkins. I came to the Department of Radio-Television-Film nearly ten years ago to explore the intersections of critical studies, communications, and development. Since then, she has helped me to mature as a scholar, encouraging me to ask incisive questions, to confront them methodically, and articulate evidence systematically. Her enthusiastic support for my dissertation project gave me the courage to challenge myself and persevere through difficult circumstances. Oftentimes, my project was sustained by her unrelenting passion and confidence in my work. It is not only her intellectual influence, but her kindness and genuine concern for her students to which I am most indebted.
    [Show full text]
  • Supplementary Appendix
    Supplementary Appendix This appendix has been provided by the authors to give readers additional information about their work. Supplement to: Gilbert PB, Montefiori DC, McDermott A, et al. Immune Correlates Analysis of the mRNA-1273 COVID-19 Vaccine Efficacy Trial 1 Table of Contents Immune Assays Team. ................................................................................................................................ 6 Moderna, Inc. Team. .................................................................................................................................. 6 Coronavirus Vaccine Prevention Network (CoVPN)/Coronavirus Efficacy (COVE) Team. .............. 7 CoVPN/COVE Team (cont’d): COVE Trial Investigators and Study Teams .................................... 10 United States Government (USG)/Coronavirus Prevention Network (CoVPN) Biostatistics Team. 20 Figure S1. Timing of mRNA-1273 doses, blood sampling, and the two time periods for diagnosis of COVID-19 endpoints (“Intercurrent” and “Post Day 57”). .................................................................. 21 Figure S2. Flowchart of study participants from enrollment to the case-cohort set of baseline SARS- CoV-2 negative per-protocol participants. ............................................................................................. 22 Supplementary Text 1: Additional details on the immunoassays ......................................................... 23 Solid-phase electrochemiluminescence S-binding IgG immunoassay (ECLIA) ....................
    [Show full text]
  • LIST of the WOOD PACKAGING MATERIAL PRODUCER for EXPORT 2007/2/10 Registration Number Registered Facility Address Phone
    LIST OF THE WOOD PACKAGING MATERIAL PRODUCER FOR EXPORT 2007/2/10 Registration number Registered Facility Address Phone ０００１００２ ITOS CORPORATION KAMOME-JIGYOSHO 62-1 KAMOME-CHO NAKA-KU YOKOHAMA-SHI KANAGAWA, JAPAN 045-622-1421 ASAGAMI CORPORATION YOKOHAMA BRANCH YAMASHITA ０００１００４ 279-10 YAMASHITA-CHO NAKA-KU YOKOHAMA-SHI KANAGAWA, JAPAN 045-651-2196 OFFICE ０００１００７ SEITARO ARAI & CO., LTD. TORIHAMA WAREHOUSE 12-57 TORIHAMA-CHO KANAZAWA-KU YOKOHAMA-SHI KANAGAWA, JAPAN 045-774-6600 ０００１００８ ISHIKAWA CO., LTD. YOKOHAMA FACTORY 18-24 DAIKOKU-CHO TSURUMI-KU YOKOHAMA-SHI KANAGAWA, JAPAN 045-521-6171 ０００１０１０ ISHIWATA SHOTEN CO., LTD. 4-13-2 MATSUKAGE-CHO NAKA-KU YOKOHAMA-SHI KANAGAWA, JAPAN 045-641-5626 THE IZUMI EXPRESS CO., LTD. TOKYO BRANCH, PACKING ０００１０１１ 8 DAIKOKU-FUTO TSURUMI-KU YOKOHAMA-SHI KANAGAWA, JAPAN 045-504-9431 CENTER C/O KOUEI-SAGYO HONMOKUEIGYOUSHO, 3-1 HONMOKU-FUTO NAKA-KU ０００１０１２ INAGAKI CO., LTD. HONMOKU B-2 CFS 045-260-1160 YOKOHAMA-SHI KANAGAWA, JAPAN ０００１０１３ INOUE MOKUZAI CO., LTD. 895-3 SYAKE EBINA-SHI KANAGAWA, JAPAN 046-236-6512 ０００１０１５ UTOC CORPORATION T-1 OFFICE 15 DAIKOKU-FUTO TSURUMI-KU YOKOHAMA-SHI KANAGAWA, JAPAN 045-501-8379 ０００１０１６ UTOC CORPORATION HONMOKU B-1 OFFICE B-1, HONMOKU-FUTOU, NAKA-KU, YOKOHAMA-SHI, KANAGAWA, JAPAN 045-621-5781 ０００１０１７ UTOC CORPORATION HONMOKU D-5 CFS 1-16, HONMOKU-FUTOU, NAKA-KU, YOKOHAMA-SHI, KANAGAWA, JAPAN 045-623-1241 ０００１０１８ UTOC CORPORATION HONMOKU B-3 OFFICE B-3, HONMOKU-FUTOU, NAKA-KU, YOKOHAMA-SHI, KANAGAWA, JAPAN 045-621-6226 ０００１０２０ A.B. SHOUKAI CO., LTD.
    [Show full text]
  • Welcome to the Seventh Annual Hawaii International Conference on Education
    2009 Hawaii International Conference on Education Honolulu, Hawaii Welcome to the Seventh Annual Hawaii International Conference on Education Aloha! We welcome you to the Seventh Annual Hawaii International Conference on Education. This event offers a rare opportunity for academics and other professionals from around the world to share their broad array of perspectives. True to its primary goal, this conference provides those with cross-disciplinary interests related to education to meet and interact with others inside and outside their own discipline. The international attendees to this conference bring a variety of viewpoints shaped by different cultures, languages, geography and politics. This diversity is also captured in the Hawaii International Conference’s unique cross-disciplinary approach. The resulting interaction energizes research as well as vocation. With Waikiki Beach, Diamond Head and the vast South Pacific as the backdrop, this venue is an important dimension of this conference. For centuries a stopping place of explorers, Hawaii has historically been enriched by the blend of ideas that have crossed our shores. The Hawaii International Conference on Education continues this tradition in the nurturing spirit of Aloha. Along with its ideal weather and striking beauty, the Hawaiian Islands provide natural elements to inspire learning and dialogue. The 2008 conference was a great success. We hosted more than 1,200 participants representing more than 40 countries. Thank you for joining the 2009 Hawaii International Conference on Education! The 2010 Hawaii International Conference on Education will be held January 7 – 10, 2010 at the Waikiki Beach Marriott Resort & Spa and the Hilton Waikiki Prince Kuhio Hotel in Honolulu, Hawaii.
    [Show full text]
  • This Sporting Life: Sports and Body Culture in Modern Japan William W
    Yale University EliScholar – A Digital Platform for Scholarly Publishing at Yale CEAS Occasional Publication Series Council on East Asian Studies 2007 This Sporting Life: Sports and Body Culture in Modern Japan William W. Kelly Yale University Atsuo Sugimoto Kyoto University Follow this and additional works at: http://elischolar.library.yale.edu/ceas_publication_series Part of the Asian History Commons, Asian Studies Commons, Cultural History Commons, Japanese Studies Commons, Social and Cultural Anthropology Commons, and the Sports Studies Commons Recommended Citation Kelly, William W. and Sugimoto, Atsuo, "This Sporting Life: Sports and Body Culture in Modern Japan" (2007). CEAS Occasional Publication Series. Book 1. http://elischolar.library.yale.edu/ceas_publication_series/1 This Book is brought to you for free and open access by the Council on East Asian Studies at EliScholar – A Digital Platform for Scholarly Publishing at Yale. It has been accepted for inclusion in CEAS Occasional Publication Series by an authorized administrator of EliScholar – A Digital Platform for Scholarly Publishing at Yale. For more information, please contact [email protected]. This Sporting Life Sports and Body Culture in Modern Japan j u % g b Edited by William W. KELLY With SUGIMOTO Atsuo YALE CEAS OCCASIONAL PUBLICATIONS VOLUME 1 This Sporting Life Sports and Body Culture in Modern Japan yale ceas occasional publications volume 1 © 2007 Council on East Asian Studies, Yale University All rights reserved Printed in the United States of America No part of this book may be used or reproduced in any manner whatsoever without written permis- sion. No part of this book may be stored in a retrieval system or transmitted in any form or by any means including electronic electrostatic, magnetic tape, mechanical, photocopying, recording, or otherwise without the prior permission in writing of the publisher.
    [Show full text]
  • Superplastic Forming, Electromagnetic Forming, Age Forming, Warm Forming, and Hydroforming
    ANL-07/31 Innovative Forming and Fabrication Technologies: New Opportunities Final Report Energy Systems Division About Argonne National Laboratory Argonne is a U.S. Department of Energy laboratory managed by UChicago Argonne, LLC under contract DE-AC02-06CH11357. The Laboratory’s main facility is outside Chicago, at 9700 South Cass Avenue, Argonne, Illinois 60439. For information about Argonne, see www.anl.gov. Availability of This Report This report is available, at no cost, at http://www.osti.gov/bridge. It is also available on paper to the U.S. Department of Energy and its contractors, for a processing fee, from: U.S. Department of Energy Office of Scientific and Technical Information P.O. Box 62 Oak Ridge, TN 37831-0062 phone (865) 576-8401 fax (865) 576-5728 [email protected] Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor UChicago Argonne, LLC, nor any of their employees or officers, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of document authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof, Argonne National Laboratory, or UChicago Argonne, LLC.
    [Show full text]
  • Sinner to Saint
    FINAL-1 Sat, Nov 4, 2017 7:23:54 PM Your Weekly Guide to TV Entertainment for the week of November 11 - 17, 2017 OLD FASHIONED SERVICE Sinner to saint FREE REGISTRY SERVICE Kimberly Hébert Gregoy and Jason Ritter star in “Kevin (Probably) Saves the World” Massachusetts’ First Credit Union In spite of his selfish past — or perhaps be- Located at 370 Highland Avenue, Salem John Doyle cause of it — Kevin Finn (Jason Ritter, “Joan of St. Jean's Credit Union INSURANCEDoyle Insurance AGENCY Arcadia”) sets out to make the world a better 3 x 3 Voted #1 1 x 3 place in “Kevin (Probably) Saves the World,” Serving over 15,000 Members • A Part of your Community since 1910 Insurance Agency airing Tuesday, Nov. 14, on ABC. All the while, a Supporting over 60 Non-Profit Organizations & Programs celestial being known as Yvette (Kimberly Hé- bert Gregory, “Vice Principals”) guides him on Serving the Employees of over 40 Businesses Auto • Homeowners his mission. JoAnna Garcia Swisher (“Once 978.219.1000 • www.stjeanscu.com Business • Life Insurance Upon a Time”) and India de Beaufort (“Veep”) Offices also located in Lynn, Newburyport & Revere 978-777-6344 also star. Federally Insured by NCUA www.doyleinsurance.com FINAL-1 Sat, Nov 4, 2017 7:23:55 PM 2 • Salem News • November 11 - 17, 2017 TV with soul: New ABC drama follows a man on a mission By Kyla Brewer find and anoint a new generation the Hollywood ranks with roles in With You,” and has a recurring role ma, but they hope “Kevin (Proba- TV Media of righteous souls.
    [Show full text]
  • Commencement Program, 2019
    263 rd COMMENCEMENT MAY 20, 2019 20, MAY R D COMMENCEME 263 NT CLA S S O F 2 019 M A Y 20, 20 1 9 CLASS OF 2019 KEEPING FRANKLIN’S PROMISE In the words of one elegiac tribute, “Great men have two lives: one which occurs while they work on this earth; a second which begins at the day of their death and continues as long as their ideas and conceptions remain powerful.” These words befit the great Benjamin Franklin, whose inventions, innovations, ideas, writings, and public works continue to shape our thinking and renew the Republic he helped to create and the institutions he founded, including the University of Pennsylvania. Nowhere does Franklin feel more contemporary, more revolutionary, and more alive than at the University of Pennsylvania. His startling vision of a secular, nonsectarian Academy that would foster an “Inclination join’d with an Ability to serve Mankind, one’s Country, Friends and Family” has never ceased to challenge Penn to redefine the scope and mission of the modern American university. When pursued vigorously and simultaneously, the two missions – developing the inclination to do good and the ability to do well – merge to help form a more perfect university that educates more capable citizens for our democracy. Penn has embodied and advanced Franklin’s revolutionary vision for 279 years. Throughout its history, Penn has extended the frontiers of higher learning and research to produce graduates and scholars whose work has enriched the nation and all of humanity. The modern liberal arts curriculum as we know it can trace its roots to Franklin’s innovation to have Penn students study international commerce and foreign languages.
    [Show full text]
  • Osaka University Knowledge Archive : OUKA
    Title MEMOIRS of the Institute of Scientific and Industrial Research, Osaka University Volume 75 Author(s) MEMOIRS of the Institute of Scientific and Citation Industrial Research, Osaka University. 75 P.1- P.216 Issue Date 2018 Text Version publisher URL http://hdl.handle.net/11094/77455 DOI rights Note Osaka University Knowledge Archive : OUKA https://ir.library.osaka-u.ac.jp/ Osaka University Contents Foreword ··················································································· 1 Outline of ISIR 1. Research Activities ········································································· 2 2. Education ···················································································· 20 3. International Exchange ···································································· 21 4. Concluding Remarks ······································································· 23 Activities of Divisions Division of Information and Quantum Sciences ·········································· 27 Division of Advanced Materials and Beam Science ······································ 43 Division of Biological and Molecular Sciences ··········································· 59 Division of Next Industry Generation ······················································· 73 Division of Special Projects ·································································· 77 Division of Joint Research ···································································· 79 Activities of Centers Nanoscience Nanotechnology Center
    [Show full text]
  • Pulse Pressure Forming of Lightweight Materials, Development
    2010 DOE Vehicle Technologies Program Review Presentation LM015, Mark T. Smith, (509) 375-4478, [email protected] 1. Pulse Pressure Forming of Lightweight Materials 2. Development of High Strength Superplastic Aluminum Sheet for Automotive Applications 3. Friction Stir Spot Welding of Advanced High Strength Steels This presentation does not contain proprietary, confidential, or otherwise restricted information Project ID: LM015 1 (Project 18987/Agreement 17239) 2010 DOE Vehicle Technologies Program Review Pulse Pressure Forming of Lightweight Materials P.I.: Richard Davies, (509) 375-6474, [email protected] Presenter: Mark T. Smith, (509) 375-4478, [email protected] This presentation does not contain proprietary, confidential, or otherwise restricted information Project ID: LM015 2 Project Overview Project Timeline: Targets Start – 3Q FY08 The VTP target for weight reduction of the vehicle and its Finish – 3Q FY11 subsystems is 50%. 65% complete Pulse Pressure Forming (PPF) of aluminum and Advanced High Strength Steels (AHSS) has the potential to achieve 25 to 45% weight savings vs. Budget: conventional steels Total project funding: Barriers PNNL: $1475k Barriers to using PPF of aluminum and AHSS in the lightweighting of vehicles: FY08 Funding Received: Lack of understanding of the formability and strain rates that develop during PPF processing $200k Lack of validated constitutive relations for lightweight materials during PPF processing FY09 Funding Received: Lack of validation of finite element simulation of $450k PPF processing Partners FY10 Funding Received: OEM and Industry participants: $450k Sergey Golovashchenko (Ford) John Bradley (General Motors) FY11 Funding Request: Ajit Desai, Chrysler $375k US Steel, Alcoa Relevance to Technology Gaps: Project Objectives: Enable broader deployment of automotive lightweighting materials in body-in-white and closure panels through extended formability of aluminum alloys, magnesium alloys, and HSS/AHSS.
    [Show full text]
  • Women's World Golf Rankings | Rankings
    Rolex Women's World Golf Rankings Monday, August 16, 2021 Week YTD Rank Name ‐ ID Country Events Total Average Change Change 1 ‐‐ +3 Korda, Nelly ‐ 5394 USA 46 487.2938 10.5933 2 ‐‐ ‐1 Ko, Jin Young ‐ 4532 KOR 47 411.9841 8.7656 3 ‐‐ ‐‐ Park, In Bee ‐ 975 KOR 48 368.2840 7.6726 4 ‐‐ ‐2 Kim, Sei Young ‐ 4110 KOR 53 385.0717 7.2655 5 ‐‐ ‐‐ Kang, Danielle ‐ 3003 USA 48 284.5672 5.9285 6 +3 +23 Ko, Lydia ‐ 3837 NZL 53 309.2874 5.8356 7 ‐1 +2 Kim, Hyo‐Joo ‐ 3625 KOR 50 290.3628 5.8073 8 ‐‐ +37 Saso, Yuka ‐ 6495 PHI 35 202.1526 5.7758 9 ‐2 ‐3 Henderson, Brooke M. ‐ 4629 CAN 53 298.3112 5.6285 10 +1 ‐3 Hataoka, Nasa ‐ 6781 JPN 51 278.7722 5.4661 11 ‐1 ‐3 Lee, Minjee ‐ 4139 AUS 57 308.4522 5.4114 12 ‐‐ ‐1 Thompson, Lexi ‐ 3007 USA 46 228.3236 4.9636 13 ‐‐ +149 Tavatanakit, Patty ‐ 6198 THA 41 189.7244 4.6274 14 +2 +9 Korda, Jessica ‐ 2653 USA 43 174.3329 4.0543 15 ‐1 +3 Green, Hannah ‐ 4449 AUS 52 208.3949 4.0076 16 ‐1 +25 Park, Min Ji ‐ 6898 KOR 56 224.1902 4.0034 17 ‐‐ ‐5 Lee6, Jeong Eun ‐ 5879 KOR 60 237.9748 3.9662 18 ‐‐ +17 Ewing, Ally ‐ 5839 USA 53 210.0355 3.9629 19 ‐‐ +12 Feng, Shanshan ‐ 1518 CHN 40 157.8951 3.9474 20 ‐‐ ‐6 Ryu, So Yeon ‐ 2982 KOR 46 179.1754 3.8951 21 ‐‐ ‐‐ Jutanugarn, Ariya ‐ 3079 THA 56 211.7592 3.7814 22 ‐‐ ‐2 Jang, Ha Na ‐ 4114 KOR 54 191.5492 3.5472 23 ‐‐ +9 Ernst, Austin ‐ 4468 USA 53 183.6676 3.4654 24 ‐‐ +39 Inami, Mone ‐ 6341 JPN 61 210.1851 3.4457 25 ‐‐ +8 Salas, Lizette ‐ 2632 USA 53 177.9807 3.3581 26 ‐‐ ‐10 Furue, Ayaka ‐ 7247 JPN 53 177.0494 3.3406 27 +1 ‐8 Kupcho, Jennifer ‐ 6944 USA 47 151.6055 3.2256
    [Show full text]