- Home
- » Tags
- » Polymer degradation
Top View
- Ep 0225186 A2
- Thermal Degradation of Acrylonitrile–Butadiene–Styrene (ABS) Blends
- Mechanical Recycling of Polymers for Dummies
- Thermal Degradation of Polystyrene, Poly(1,4-Butadiene) and Copolymers of Styrene and 1,4-Butadiene Irradiated Under Air Or Argon with 60Co-Γ-Rays W
- Polymeric Materials for Membrane Contactor Devices Applied to Water Treatment by Ozonation
- GM-Improved Antiaging Effect of Acrylonitrile Butadiene Styrene In
- Catalytic Pyrolysis of Poly Vinyl Chloride As a Viable Way of Waste Management
- Review on the Current Status of Polymer Degradation: a Microbial Approach Vinay Mohan Pathak* and Navneet
- Degradation of Polypropylene in Naturally and Artificially Weathered Plastic Matrix Composites
- Thermal Degradation of Polymer Blends Containing Poly(Vinyl Chloride) David W
- Radiation Degradation and Stability of Polymer
- Thermal Stability of Nanosilica-Modified Poly(Vinyl Chloride)
- Degradation of Polyethylene and Biocomponent-Derived Polymer Materials: an Overview
- Thermal Degradation of Polystyrene (PS) Nanocomposites Loaded with Sol Gel-Synthesized Zno Nanorods
- Effect of Electron Beam Irradiation on Polymers Pradeep K
- Science to Enable Sustainable Plastics
- Synthesis and Characterization of Copolymer of Styrene / Maleic Acid- Dicyclopentadiene Monoester
- Macromolecular Modifications of Poly(Etherketoneketone) (PEKK) Copolymer at the Melting State Tanguy Choupin, Bruno Fayolle, Gilles Regnier, C
- Evaluation of Decomposition Kinetics of Poly (Ether-Ether-Ketone) by Thermogravimetric Analysis
- A Review on Graphene's Light Stabilizing Effects for Reduced
- Degradation Mechanisms of Bioresorbable Polyesters. Part 2
- Chapter Four Role of External Sites on Catalytic Polymer Degradation
- Poly(Itaconic Acid) Derivatives As Thermal Stabilizers for Polystyrene and Poly(Methyl Methacrylate)
- Thermal Ageing of PTFE in the Melted State: Influence of Interdiffusion On
- Bio-Based Flame Retardation of Acrylonitrile-Butadiene-Styrene
- Recycling of Waste from Polymer Materials: an Overview of the Recent Works
- Polymer Degradation and Stability
- Environmental Risk of Polymers and Their Degradation Products
- Kinetics of the Thermal and Thermo-Oxidative Degradation of Polystyrene, Polyethylene and Poly(Propylene)
- A Systematic Study on the Degradation Products Generated from Artificially Aged Microplastics
- Asphaltene Graft Copolymer by Ft-Ir Spectroscopy
- Graft Copolymers of Maleic Anhydride and Its Isostructural Analogues: High Performance Engineering Materials
- Thermal Aging Influence on Mechanical Properties and Fatigue Behavior of Acrylonitrile Butadiene Styrene Thermoplastic Polymer Nanoclay Composites
- Comparative Study of Polypropylene (Hms-Pp) Degradation Under Different Conditions
- Degradation Mechanism of Expanded Polystyrene (EPS) Foam in Lost Foam Casting, PIPS Approach for Synthesis and Novel Expansion Techniques for Cellular Foam
- Synthesis of Permanent Non-Leaching Antimicrobial Polymer Nanofibers
- Controlling of Degradation Effects in Radiation Processing of Polymers
- Radiochemical Ageing of Poly(Ether Ether Ketone) Emmanuel Richaud, Paulo Ferreira, Ludmila Audouin, Xavier Colin, Jacques Verdu, Carole Monchy-Leroy
- Ep 0225186 B1
- Accelerated Degradation of Polyetheretherketone (PEEK
- Direct Detection of Additives and Degradation Products from Polymers by Liquid Extraction Surface Analysis Employing Chip-Based Nanospray Mass Spectrometry
- Environmental Biodegradation of Polyethylene
- Heat and Ultraviolet Aging of Poly(Vinyl Chloride)
- Microbial Degradation of Plastic in Aqueous Solutions Demonstrated by CO2 Evolution and Quantification
- Lifetime Prediction Methods for Degradable Polymeric Materials—A Short Review
- Degradation of Aliphatic Polyesters in the Presence of Inorganic Fillers G
- (PTFE) Irradiated by the Electron Beam
- Degradation of Acrylonitrile-Butadiene-Styrene and Polycarbonate by UV Irradiation R
- Polyethylene/Polyamide Blends Made of Waste with Compatibilizer: Processing, Morphology, Rheological and Thermo-Mechanical Behavior
- Current Technologies in Depolymerization Process and the Road Ahead
- Challenges with Verifying Microbial Degradation of Polyethylene