Arnolds & Sons Blechblasinstrumente Katalog 2017
Total Page:16
File Type:pdf, Size:1020Kb
Brasswind 2017 Catalogue Arnolds & Sons Arnolds & Sons Trumpet Trumpet The trumpet has a long and rich history. It is believed that the trumpet was used as a signaling device in ancient Egypt, Greece and the Near East. During the Romantic period, the trumpet was evident in various forms of art such as literature and music. But during this time, the trumpet was merely recognized as an instrument used to signal, announce, proclaim and for other relevant purposes. It was later when the trumpet began to be considered as a musical instrument. 14th–15th century — The trumpet acquired its folded form. It was referred to as natural trumpet and produced “harmonic” tones. Also, the tromba da tirarsi emerged, an instrument that was fitted with a single slide on the mouth pipe to create a chromatic scale. 16th century — The trumpet was used both in courtly and military purposes. Also, during this period, trumpet making became popular in Germany. Before the end of this period, the use of the trumpet for musical works began. At first the low register of the trumpet was used then later on musicians began to utilize the higher pitches of the harmonic series. 17th–18th century — The trumpet was at its height and was used by famous composers such as Leopold (Mozart’s father) and Michael (Haydn’s brother) in their musical works. The trumpets of this time were in the key ofD or C when used for courtly purposes and in the key of Eb or F when used by the military. Musicians of this period played specifically in different registers. Notably, in 1814, the valves were added to the trumpet to enable it to play the chromatic scale evenly. 19th century — The trumpet was now known as an orchestral instrument. The trumpet of this era was in the key of F and had crooks for the lower keys. The trumpet continued to undergo improvements such as the slide mechanism which has been attempted since the 1600s. Later on, the crooks of the orchestral trumpet were replaced by valves. Changes in the size of the trumpet also occurred. Trumpets were now louder and easier to play due to the improvements they underwent. 2 3 Arnolds & Sons Arnolds & Sons Trumpet Characteristics Standard for all trumpets: Unless otherwise stated, yellow brass bell plasma welded, reinforced bell with bead wire, The fundamental characteristics of the Arnolds & Sons® trumpets nickel silver outer slides, steel valves, saddle on are solid workmanship, long lasting materials, as well as intonation and 1st valve, ring on 3rd valve, machine engraved response characteristics that ideally support the beginner trumpet player. bell, traditional waterkeys, includes case and accessories. “The Arnolds & Sons® trumpets are well balanced, all-round instruments. Their good intonation, excellent finish and favourable price make them an ideal choice for beginners.” ATR - 235 ATR - 235 S ATR - 635 Heiko Hubmann, trumpet player Bb-Trumpet, steel valves, Bb-Trumpet, steel valves, Bb-Trumpet, steel valves, and pedagogue with his goldbrass leadpipe, silver plated, goldbrass leadpipe and bell, Arnolds & Sons® ATR - 5200 GSG adjustable ring on 3rd valve adjustable ring on 3rd valve adjustable ring on 3rd valve 4 5 Arnolds & Sons Arnolds & Sons Trumpet ATR - 8837 ATR - 8837 G ATR - 8843 S Bb-Trumpet, bell 37, thumb Bb-Trumpet, goldbrass bell 37, Bb-Trumpet, silver plated, bell hook with stopper on 1st valve thumb hook with stopper on 1st 37, thumb hook with stopper slide, ring with stopper on valve slide, ring with stopper on on 1st valve slide, ring with 3rd valve slide 3rd valve slide stopper on 3rd valve slide ATR - 4200 ATR - 4200 G ATR - 5200 GS ATR - 5200 GSG Bb-Trumpet, goldbrass Bb-Trumpet, goldbrass Bb-Trumpet, silver plated, Bb-Trumpet, silver plated, leadpipe, adjustable ring on leadpipe and bell, adjustable goldbrass leadpipe and bell, goldbrass leadpipe and bell, 3rd valve ring on 3rd valve Amado style waterkeys goldplated caps, Amado style waterkeys Concept The concept of the Terra range is where ideas become reality. Introducing professional features in instruments that are absolutely economically manufactured, the Terra range defines a new segment. Response and intonation characteristics are based on the Standard for all trumpets: Unless otherwise stated, yellow brass bell plasma welded, Models of the series 8000 – Professional heightened expectations of experienced musicians. The reinforced bell with bead wire, nickel silver outer slides, steel Bell 37: 8837, yellow brass bell | 8837G, goldbrass bell | 8837S, yellow brass silver plated | 8837GS, goldbrass silver plated choice of materials and workmanship complement an valves, saddle on 1st valve, ring on 3rd valve, machine engraved bell, Bell 43: 8843, yellow brass bell | 8843G, goldbrass bell | 8843S, yellow brass silver plated | 8843GS, goldbrass silver plated attractive offer for the demanding instrumentalist. traditional waterkeys, includes case and accessories. All models are also available with a lightweight bell (LT): 8837H | 8837GH | 8837HS | 8837GHS etc. 6 7 Arnolds & Sons Arnolds & Sons Trumpet | Cornet | Flugelhorn Flexibility Rotary valve Trumpet Pocket Trumpet ATR - 4000 ATR - 200 Concert trumpet, 3 rotary valves, nickel silver leadpipe, trigger Bb-Pocket Trumpet, compact, monel valves, also available in red, Terra also stands for as much flexibility in one instrument as possible. Standard for all trumpets: and waterkey on 3rd valve, long waterkey on main tuning slide blue and black laquer finish By simply changing all the slides in the Bb/C or Eb/D, you can alter Unless otherwise stated, yellow brass bell plasma welded, the pitch of the instrument to the key you require. Further, the Bb/C reinforced bell with bead wire, has a separate bell and lead-pipe for each pitch. nickel silver outer slides, steel valves, saddle on 1st valve, ring on 3rd valve, machine engraved bell, traditional waterkeys, includes case and accessories. Standard for all cornets and flugelhorns: Cornet/Flugelhorn Unless otherwise stated, yellow brass bell plasma welded, reinforced bell with bead wire, nickel silver outer slides, steel valves, saddle on 1st valve, ring on 3rd valve, machine engraved bell, traditional waterkeys. ATR - 4600 GS Eb/D-Trumpet, silver plated, goldbrass leadpipe and bell, with Eb- and D-slides, Amado style waterkeys ATR - 4600 GS ATR - 5600 GS ATR - 6600 GS ATR - 8600 S Eb/D-Trumpet, silver plated, Bb/C-Trumpet, silver plated, C-Trumpet, silver plated, C-Trumpet, silver plated, goldbrass leadpipe and bell, goldbrass leadpipe and bell, goldbrass leadpipe and bell, reversed goldbrass lead pipe with Eb- und D-slides, Amado Bb-Bell, C-Bell, and full sets of Amado style waterkeys style waterkeys Bb- and C-slides, Amado style waterkeys ACR - 655G/655S/655 ACR - 4220 S/4220 G/4220 Bb-Cornet, steel valves, goldbrass leadpipe and Bb-Cornet, Monel valves, goldbrass leadpipe and bell, Amado style waterkeys. Optional models: bell, silver plated, adjustable ring on 3rd valve. 655S silver plated and 655 yellow brass Optional models: 4220G goldbrass and 4220 yellow brass AFH - 655 S/655G/655 AFH - 4050 Bb-Flugelhorn, steel valves, nickel silver leadpipe, trigger Concert Flugelhorn, 3 rotary valves, goldbrass bell, on 3rd valve, silver plated, Amado style waterkeys. nickel silver lead pipe, trigger and waterkey on 3rd Optional models: 655G goldbrass and 655 yellow brass valve, long waterkey on main tuning slide 8 9 Arnolds & Sons Arnolds & Sons Trumpet | Cornet | Flugelhorn Model Tuning Bore Bell Leadpipe Valves Slides 1) Waterkeys Finish Level Plasma welded M = Monel Reinforced bell S = Steel Saddle on Adjustabel ring Ring on Trigger on Diameter Diameter Yellow brass Goldbrass with bead wire Engraving Goldbrass Brass Nickel silver Traditional Amado Style Lacquered Silver plated B = Brass 1st valve on 3rd valve 3rd valve 3rd valve H = LT Bell C = Cylinder ATR-235 Bb 11,68 mm 123,00 mm I I I I S I I I I Student ATR-235 S Bb 11,68 mm 123,00 mm I I I I S I I I I ATR-635 Bb 11,68 mm 123,00 mm I I I I S I I I I ATR-4000 Bb 11,00 mm 130,00 mm I I I I B C I I I Intermediate ATR-4200 Bb 11,68 mm 120,65 mm I I I I S I I I I ATR-4200 G Bb 11,68 mm 120,65 mm I I I I S I I I I ATR-5200 GS Bb 11,68 mm 120,65 mm I I I I S I I I I ATR-5200 GSG Bb 11,68 mm 120,65 mm I I I I S 3) I I I I ATR-5600 GS Bb/C 11,68 mm 123,00 mm I I I I S I I I I ATR-6600 GS C 11,68 mm 120,65 mm I I I I S I I I I ATR-8600 S C 11,68 mm 120,65 mm I I I I S I I I I Professional ATR-4600 GS Eb/D 11,68 mm 113,20 mm I I I I S I I I I ATR-8837 / 8843 Bb 11,68 mm 123,00 mm I I I I S I I I I ATR-8837 S / 8843 S Bb 11,68 mm 123,00 mm I I I I S I I I I ATR-8837 G / 8843 G Bb 11,68 mm 123,00 mm I I I I S I I I I ATR-8837 GS / 8843 GS Bb 11,68 mm 123,00 mm I I I I S I I I I ATR-8837H/ 8843H Bb 11,68 mm 123,00 mm I H I I S I I I I ATR-8837 H S / 8843 H S Bb 11,68 mm 123,00 mm I H I I S I I I I ATR-8837 GH/8843 G H Bb 11,68 mm 123,00 mm I H I I S I I I I ATR8837 G H S / 8843 G H S Bb 11,68 mm 123,00 mm I H I I S I I I I ACR-4220 Bb 11,40 mm 118,50 mm I I I I M I I I I Intermediate ACR-4220 S Bb 11,40 mm 118,50 mm I I I I M I I I I ACR-4220 G Bb 11,40 mm 118,50 mm I I I I M I I I I ACR-655 Bb 11,80 mm 120,00 mm I I I I S I I I I Student ACR-655 S Bb 11,80 mm 120,00 mm I I I I S I I I I ACR-655 G Bb 11,80 mm 120,00 mm I I I I S I I I I AFH-4050 Bb 11,20 mm 150,00 mm I I I I C I I I AFH-655 Bb 11,20 mm 154,00 mm I I I I S I I I AFH-655 S Bb 11,20 mm 154,00 mm I I I I S I I I AFH-655 G Bb 11,20 mm 154,00 mm I I I I S I I I ATR-200 Bb 11,70 mm 104,00 mm I I I I M I I 2) H= Light weight 2) Also available in red, blue and black All Arnolds & Sons® trumpets, flugelhorns and cornets include a mouthpiece, comfort-case and accessories.