The Effect of the Unboxing Experience on Positive Affect and Willingness to Share
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Dupont™ Tyvek® Fluid Applied WB+™ Fluid Applied Weather Barrier for Commercial Wall Substrates Including CMU and Gypsum Sheathing
Product Information Sheet DuPont™ Tyvek® Fluid Applied WB+™ Fluid Applied Weather Barrier for Commercial Wall Substrates Including CMU and Gypsum Sheathing FEATURES Description Ease of Installation DuPont™ Tyvek® Fluid Applied WB+™ is a fluid applied air barrier • Single component, one-coat application. protection engineered for the unique demands of heavy • Offers 2 to 3 times the coverage of competitive products. commercial construction projects. Based on a unique formulation Approximately 50 to 65 sq. ft./gallon in one coat, depending on using silyl-terminated polyether polymer technology, Tyvek® Fluid substrate conditions (temperature and moisture), substrate Applied WB+™ offers low shrinkage during curing, superior porosity, and uniformity of application. elongation and recovery and can be easily applied in one coat. • Spray or pressure roll for fast and easy application. • Installation temperature range 25°F ambient (-4°C) to a maximum Air and Water Barrier Performance surface temperature 140°F (60°C). Do not install once ambient • Offers an ideal combination of air and water holdout with temperature exceeds 95°F (35°C), unless surface is shaded. Max vapor permeability. in-service temperature 180°F (82°C). • Air Barrier Association of America evaluated to exceed ABAA, • Exhibits low shrinkage during curing, helping to minimize the ASHRAE 90.1 and IECC air leakage requirements when tested in risk of cracking and pin-holing. accordance with ASTM E2357. High Performance Durability Emitting Materials: Product-Specific EPD (Environmental • This formulation of Tyvek® Fluid Applied is not water soluble and Product Declaration) Validation. In addition, the use of a will not wash off the wall when exposed to bulk water, even continuous air barrier is a prerequisite for LEED applications before curing. -
Guidelines for Editorial Submissions
GUIDELINES FOR EDITORIAL SUBMISSIONS Thank you for your interest in contributing to Packaging Digest. We actively seek expert analysis and opinions to help engage our audience of packaging professionals. We accept topic ideas and story leads, as well as fully written contributed articles* that are relevant for our audience, compelling and, whenever possible, exclusive to Packaging Digest, the Voice of the Packaging Community since 1963. Now 100% digital, we post articles to our website and share them with our audience via enewsletters. Packaging Digest offers “peer-to-peer” insights that share experiences, advice and successes that enable “cross fertilization” of ideas and technologies across all markets. [*All contributors must sign our standard freelancer/contributor agreement, whether the work is free or paid. Contact any of the editors to get a copy of the form.] Speak to our readers: From packaging engineers and executives to designers and developers, our global audience is responsible for various packaging roles at end-user companies. Our readers are involved in all the functions involved in packaging a product for sale, including management, plant operations, material research and development, purchasing and shipping. They develop packages, as well as design and run the packaging production lines that create finished product(s). Our readers work in various markets in consumer packaged goods and healthcare, including foods, beverages, personal care products, pharmaceuticals, medical items, electronics and toys. What to submit: Professionals in our packaging community are interested in many topics that can be classified… 1. By market: Food, beverage, personal care, pharmaceutical, medical, electronics and more. 2. By topic/issue: Sustainability; ecommerce; food safety; recruitment, education and training; Industry 4.0; automation; optimization and more. -
Developing Servo Indexing System Using Timing Screw for Automatic Liquid Filler in Manufacturing Environment
Paper ID #15398 Developing Servo Indexing System Using Timing Screw for Automatic Liquid Filler in Manufacturing Environment Dr. Akram Hossain, Purdue University - Calumet Akram Hossain, Purdue University Calumet Akram Hossain is a professor in the department of Engi- neering Technology and Director of the Center for Packaging Machinery Industry at Purdue University Calumet, Hammond, IN. He worked eight years in industry at various capacities. He is working with Purdue University Calumet for the past 27 years. He consults for industry on process control, packag- ing machinery system design, control and related disciplines. He is a senior member of IEEE and he served in IEEE/Industry Application Society for 15 years at various capacities. He served as chair of Manufacturing Systems Development Applications Department (MSDAD) of IEEE/IAS. Currently, he is serving a two-year term as the chair of the Instrumentation of ASEE (American Society of Engineering Education). He authored over 29 refereed journal and conference publications. In 2009 he as PI received NSF-CCLI grant entitled A Mechatronics Curriculum and Packaging Automation Laboratory Facility. In 2010 he as Co-PI received NSF-ATE grant entitled Meeting Workforce Needs for Mechatronics Tech- nicians. From 2003 through 2006, he was involved with Argonne National Laboratory, Argonne, IL in developing direct computer control for hydrogen powered automotives. He is also involved in several direct computer control and wireless process control related research projects. His current interests are in the area of packaging machinery system design & control, industrial transducers, industrial process control systems, modeling and simulation of Mechatronics devices and systems in virtual environment, programmable logic controllers, programmable logic devices, renewable energy related projects, wireless controls, statistical process control, computer aided design and fabrication of printed circuit board. -
Herakles Iconography on Tyrrhenian Amphorae
HERAKLES ICONOGRAPHY ON TYRRHENIAN AMPHORAE _____________________________________________ A Thesis presented to the Faculty of the Graduate School University of Missouri-Columbia _____________________________________________ In Partial Fulfillment Of the Requirements for the Degree Master of Arts ______________________________________________ by MEGAN LYNNE THOMSEN Dr. Susan Langdon, Thesis Supervisor DECEMBER 2005 ACKNOWLEDGEMENTS I would like to thank my thesis advisor, Dr. Susan Langdon, and the other members of my committee, Dr. Marcus Rautman and Dr. David Schenker, for their help during this process. Also, thanks must be given to my family and friends who were a constant support and listening ear this past year. ii TABLE OF CONTENTS ACKNOWLEDGEMENTS………………………………………………………………ii LIST OF ILLUSTRATIONS……………………………………………………………..v Chapter 1. TYRRHENIAN AMPHORAE—A BRIEF STUDY…..……………………....1 Early Studies Characteristics of Decoration on Tyrrhenian Amphorae Attribution Studies: Identifying Painters and Workshops Market Considerations Recent Scholarship The Present Study 2. HERAKLES ON TYRRHENIAN AMPHORAE………………………….…30 Herakles in Vase-Painting Herakles and the Amazons Herakles, Nessos and Deianeira Other Myths of Herakles Etruscan Imitators and Contemporary Vase-Painting 3. HERAKLES AND THE FUNERARY CONTEXT………………………..…48 Herakles in Etruria Etruscan Concepts of Death and the Underworld Etruscan Funerary Banquets and Games 4. CONCLUSION………………………………………………………………..67 iii APPENDIX: Herakles Myths on Tyrrhenian Amphorae……………………………...…72 BIBLIOGRAPHY………………………………………………………………………..77 ILLUSTRATIONS………………………………………………………………………82 iv LIST OF ILLUSTRATIONS Figure Page 1. Tyrrhenian Amphora by Guglielmi Painter. Bloomington, IUAM 73.6. Herakles fights Nessos (Side A), Four youths on horseback (Side B). Photos taken by Megan Thomsen 82 2. Tyrrhenian Amphora (Beazley #310039) by Fallow Deer Painter. Munich, Antikensammlungen 1428. Photo CVA, MUNICH, MUSEUM ANTIKER KLEINKUNST 7, PL. 322.3 83 3. Tyrrhenian Amphora (Beazley #310045) by Timiades Painter (name vase). -
Future of Packaging
INDEPENDENT PUBLICATION BY RACONTEUR.NET #0533 18 / 07 / 2018 FUTURE OF PACKAGING WHAT NEXT AFTER TIME IS NOW FOR BACK TO THE FUTURE 03 BLUE PLANET? 06 CREATIVE DESIGN 22 FOR PAST WRAP RACONTEUR.NET 03 SUSTAINABILTY FUTURE OF Less is More PACKAGING This is our answer to the important question of how to ship the growing number of parcels sustainably. We do What next after this by using air in an innovative way. Air makes up more than 99% of our protective packaging; less than 1% is fully recyclable material. FP International is an expert in air cushions, which solve your packaging challenges by Distributed in increasing packaging speed and reducing packaging material, transport costs, storage space and return rates. Blue Planet? Published in association with As oceans drown in plastic and the developed world launches a clean-up campaign, the tide of pollution is still rising Event partners More E-commerce With the growth of online shopping, it is time for innovative JIM McCLELLAND carbon footprint of heavy, spatial- ly-ineffi cient packaging.” ways to reduce packaging and minimize the impact on the cean plastic is not a new For Garçon Wines, the fl at, plastic environment. problem, however it took design actually addresses sustaina- David Attenborough and bility in the round, being 87 per cent Josh Spires/Unsplash Josh Blue Planet II to turn the lighter and spatially 40 per cent smaller Otide of public opinion. than its traditional glass equivalent. CONTRIBUTORS Prime-time endorsement of the At the other end of the scale, global core sustainability message was a brands and high street retailers are Less Energy DAVID BENADY MAGDA IBRAHIM global game-changer, says Oliver also reaching out for help, often to one Specialist writer on Award-winning consumer Staple, director at EY. -
Western Plastics
PACKAGING PRODUCT GUIDE WESTERN PLASTICS LiteWrapper Foil Containers Industrial Packaging Cutterbox Film & Foil Evolution El Dorado Foils Palletwrapper Meat Film HYBRiD80 Wrapmaster CALHOUN, GA TEMECULA, CA MISSISSAUGA, ONT TABLE OF CONTENTS What’s new - New Foil Container Sizes Added - Tape and Perforated Film Dispensers Added - New Perform XL Sizes Industrial Packaging Foodservice Packaging Handywrap Pallet Stretch Wrap on Extended Cores 3 Perforated All Purpose Cling Sheets Perforated to Tear 10 EZ Bander Ultra Cling Cast Stretch Film - Narrow Width 3 Wrapmaster Safety Film Dispenser 10 HYBRiD80 Stiff Formula Micron Pallet Wrap 3 Foilmaster Safety Foil Dispenser 10 Logo Film Custom Printed Stretch Wrap 4 Premium Cutterbox Film 11 Dispensers & Handles 3” Core Banding Film 4 Premium Cutterbox Foil 11 Eco-Max Micron Pallet Wrap 4 Cutterbox Slide Cutter 12 Pallet-Tite Stretch Wrap & Machine Grade Film 5 Produce Film All Purpose Wrap 12 Perform XL Hi-Performance Machine Film 5 Mill Roll Film All Purpose Foodservice Wrap 12 Identi Film Color Tinted Pallet Wrap 6 Perforated Dispenser 12 Securi Wrap True Opaque Stretch Film 6 “Safe Handling” Printed Meat Film 12 WrapNet Soft Knitted Pallet Wrap 7 El Dorado Economy Aluminum Foil Rolls 13 Airflow Vented Stretch Wrap 7 Interfolded Foil Sheets Pop-Up Aluminum Foil Sheets 13 Litewrapper Source Reduction Wrap and Dispenser 7 Shrink Films Perforated to Tear 13 Evolution Entry Level Wrapper 7 All Purpose Meat Film - Machine and Handwrap 14 Cover-All “Pallet Cover” Top Sheeting Film 8 Foil Containers - Rounds Aluminum Rounds and Lids 15 AutoBander Narrow Width Machine Rolls 8 Foil Containers - Steam Table Foil Containers and Trays 15 Stretch-It DSF Static Dissipative Film 8 Cater Trays 15 PVC Printers Wrap Cling and Shrink Films 8 Weather All UVI Hand and Machine Film 8 XP Film Hi-Performance Prestretched Pallet Wrap 9 Get more at Laundry Wrap All Purpose PVC Overwrap 9 Bandit Carton Sealing Tape 9 wplastics.com Pallet Stretch Wrap on Disposable HandyWrap Extended Core Handles ITEM NO. -
Industrial Printer User Guide
INDUSTRIAL PRINTER USER GUIDE INDUSTRIAL PRINTER USER GUIDE 1 Markforged 480 Pleasant St Watertown MA 02472 USA https://support.markforged.com [email protected] For the latest PDF version of this document, visit our support website. Copyright © 2019 Markforged, Inc. All rights reserved. Changes are periodically made to the information herein which will be incorporated in revised editions of this publication. Markforged may make changes or improvements to the product(s) described in this publication at any time and without notice. Version 1.4.1 / April 2020 INDUSTRIAL PRINTER USER GUIDE TABLE OF CONTENTS FCC COMPLIANCE 4 UPDATING FIRMWARE 75 USER NOTES 5 ADJUSTING BELT TENSION 77 UNBOXING AND ASSEMBLY 6 REPLACING THE FIBER NOZZLE 79 QUICK START GUIDE 8 REPLACING THE PLASTIC NOZZLE 83 MANAGING EIGER ORGANIZATIONS 16 BED LEVEL TEST PRINT 88 CONNECTING YOUR PRINTER 18 ADJUSTING LASER OFFSETS 91 NETWORK REQUIREMENTS 23 ADJUSTING THE XY-OFFSET 96 IMPORTANT PLASTIC INFORMATION 25 CALIBRATING STEPPER ENCODERS LOADING PLASTIC 26 101 SET UP PLASTIC FOR LOADING ONYX PILLARS TEST PRINT 104 METER LOAD PLASTIC DIAGNOSE PRINTING PROBLEMS QUICK LOAD PLASTIC WET PLASTIC PURGE 109 LOADING FIBER 36 DIAGNOSE WET NYLON SET UP FIBER FOR LOADING METER LOAD FIBER AUTO-PAUSE FEATURE 112 QUICK LOAD FIBER MATERIAL STORAGE 116 LEVELING THE PRINT BED 45 FIBER JAM DETECTION 117 RUN LASER BED LEVEL UTILITY RUN SHIM BED LEVEL UTILITY OFFLINE PRINTING 122 ADJUST FIBER NOZZLE HEIGHT CLEARING THE BOWDEN TUBES 124 ADJUST Z-OFFSET REPLACING THE BOWDEN TUBES 127 62 PREPARING THE PRINT BED REPLACE PLASTIC BOWDEN TUBE PRINTING A PART 63 REPLACE THE FIBER BOWDEN TUBE SAFELY REMOVING PRINTED PARTS 67 DEBUG MODE 141 REMOVING SUPPORT MATERIAL 68 UNDEREXTRUSION 142 UNLOADING PLASTIC 69 TROUBLESHOOTING PREVENTIVE MAINTENANCE SCHEDULE 148 UNLOADING FIBER 73 3 INDUSTRIAL PRINTER USER GUIDE FCC COMPLIANCE Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. -
Apass Services
APASS SERVICES . AMAZON PACKAGING SUPPORT AND SUPPLIER NETWORK PARTNER . ABLE TO CERTIFY PRODUCTS IN ALL 3 TIERS - APASS EDUCATED STAFF FROM COURSES AT FFP, SIOC, AND PFP THE AMAZON PACKAGING LAB POTENTIAL TO REDUCE CHARGEBACKS, KNOWLEDGEABLE ON FORM-FACTOR PACKAGING COSTS & TRANSPORT COSTS CERTIFICATION RULES EXPERTLY CREATED PACKAGING SOLUTIONS A DESIGNATED APASS TEAM WITH CROSS- THAT MAXIMIZE THE UNBOXING EXPERIENCE FUNCTIONAL EXPERTISE Selling Through Amazon? Contact Us TOday! PACKAGING DESIGN PACKAGING SUPPLY PACKAGING TESTING • PROTOTYPING CREATION • CANADA & U.S DISTRIBUTION • WIDE VARIETY OF MATERIALS • SAMPLES CREATED WITH • JUST-IN-TIME INVENTORY AVAILABLE FOR TESTING TIER CERTIFICATION IN MIND REPLENISHMENT • ISTA-6 AMAZON TESTS • PACKAGING SOLUTIONS START HERE® • CONTACT OUR IN-HOUSE EXPERTS CROWNHILLPACKAGING.COM TO DEVELOP A CUSTOM, COST-EFFECTIVE [email protected] PACKAGING SOLUTION FOR YOUR PRODUCTS. TOLL-FREE (CAN): 888-571-1101 packaging solutions START HERE® Corrugated ProductS bubble cushion products SINGLE, DOUBLE & TRIPLE WALL CONTAINERS ROLLS, SHEETS & POUCHES PARTITIONS & PADS ADHESIVE, COHESIVE & ANTI-STATIC LAMINATED PRODUCTS SPECIALTY LAMINATION OPTIONS ASSEMBLED PACKS HONEYCOMB DIE CUTTING pallet stretch wrap HAND & MACHINE OPTIONS ASSEMBLED PACKS WIDE ASSORTMENT OF WIDTHS, GAUGES & COLOURS CUSTOM DESIGN STOCK PRODUCTS shipping supplies STEEL, POLYESTER & POLYPROPYLENE STRAPPING MOLDED PULP ANGLEBOARD TAPES & ADHESIVES CUSTOM DESIGN MAILER ENVELOPES STOCK PRODUCTS MAILING TUBES VOID FILL FOAM PRODUCTS moisture & corrosion protection ROLLS, SHEETS & POUCHES ADHESIVE, COHESIVE & ANTI-STATIC VCI PAPERS & FILMS SPECIALTY LAMINATION OPTIONS DESICCANTS & SILICA GELS EXTRUDED PROFILES polyplank foam CORRUGATED PLASTIC CUSTOM FABRICATION CUSTOM SIZES, SHAPES & DENSITIES PARTITIONS & SHEETS DIE CUTTING & ANTI-STATIC OPTIONS TOTES & BINS SPECIALTY LAMINATION OPTIONS foam-in-place first aid ST. JOHN AMBULANCE FIRST AID KITS IN-HOUSE MOLDING CAPABILITIES ST. -
Chapter One Pottery Other Than Transport Amphorae Philip M. Kenrick
. chapter one . Pottery Other Than Transport Amphorae Philip M. Kenrick INTRODUCTION THE potterY fabrics The rescue excavations of 2000 took place alongside par- The pottery is arranged primarily by fabric, in order to dis- allel investigations at Zeugma by French and Turkish tinguish where possible the various sources from which teams. When I was first invited to participate there was Zeugma was supplied. Since there is also a high degree of also understood to be a possibility of a further long-term correlation between fabrics and the functions for which the research excavation on the site to study the pottery.1 At the vessels were intended, the following conceptual structure time, it seemed premature to embark upon a comprehen- was found useful. sive description of the pottery of Zeugma: It was there fore . Table wares. Vessels for serving and consuming food: agreed that I should concentrate on a few contexts that plates, dishes, small bowls, drinking cups, together with could be reasonably well dated and that might be used to lids intended for use with such forms; also some small characterize the major chronological phases identified in flagons and jugs intended for use at the table. These are the trenches for which Oxford Archaeology was respon- generally made in fine fabrics with smooth surfaces, sible: these were Trenches 1, 2, 4, 5, 7, 9, 10, 11, 12, 13, 15, 18, mostly with a distinctive surface finish such as a slip or and 19. glaze. The briefest of notes were made upon the entire pottery collection, and these were then used in conjunction with . -
Asepflex Linear Aseptic Pouch Filler
SF&DS® AsepFlex™ Linear Pouch Filler High-capacity aseptic filler for pre-made, spouted pouches ASEPTIC SYSTEMS jbtc.com JBT AsepFlex™ Linear Pouch Filler JBT Corporation, through its SF&DS business unit, is a global Why are top brands switching to pouches for their supplier of aseptic processing and packaging solutions. product packaging needs? Established in the late 1960s, JBT SF&DS has a long, 3 Pouches are truly flexible and adaptable to meet various successful track record in aseptic bottle filling. product requirements. 3 Our AsepTec ® aseptic linear filler is renowned for its excellent Pouches allow you to print eye-catching, high-quality custom designs and, thereby, increase product visibility in performance in filling plastic bottles. JBT has added to this the retail setting. range of aseptic fillers the AsepFlex™ Linear Aseptic Pouch 3 Filler, an aseptic filler for pre-made, spouted pouch applications. Pouches enable you to clearly print all nutritional and marketing information without having to apply labels. Using End-user benefits of a spouted pouch high-quality rotogravure printing you can really make your products stand out. 3 Convenient for on-the-go consumption 3 Pouches are lightweight and reduce your storage space. 3 Lightweight Pouches also use fewer resources to produce than other 3 Unbreakable common types of packaging. 3 Plastic pouches cut down the environmental impact of your End-user benefits for aseptically filled pouches products by reducing the carbon footprint during 3 Product Quality transportation and producing less waste upon disposal. Aseptic processing provides better preservation of taste Authority and Validation Services and nutritional value. -
Overflow Fillers
OVERFLOW FILLERS A Frain Industries Packaging Equipment Whitepaper There are several dozen styles of liquid filler available from over 100 US manufacturers. All have advantages and disadvantages and the range of choice may be overwhelming to the buyer who wants to know what kind of filler is "best". This whitepaper will discuss the class of filler commonly called "overflow" fillers. Subsequent whitepapers will discuss other filling architectures. There are two broad classifications of internal volume can vary significantly liquid filler. Volumetric fillers measure especially for blown glass bottles. If and dispense an amount of liquid filled volumetrically, the level of product independent of the container size. will vary creating an appearance of over and under fill. This is especially true The second class, level fillers, rely on when products are displayed side by the internal volume of the container. side on the store shelf. Level fillers are Level fillers fill the product a certain sometimes called "cosmetic" fillers distance from the top of the neck. This because they give the cosmetic distance will remain constant regardless appearance of a constant fill volume. of the container's internal volume. This www.fraingroup.com l (630) 629-9900 2 Volumetrically identical fill volume Cosmetically similar fill volume Level fillers are available in inline or There are two main disadvantages to rotary configurations for fill volumes level filling. One is that the fill quantity is from an ounce or less to multiple gallons dependent upon the container volume. If and speeds from 5-10cpm (containers the container's internal volume varies, per minute) to 1,200ppm and more. -
A Flexible Packaging Path to a Circular Economy
A Flexible Packaging Path to a Circular Economy Flexible Packaging Sustainability Roadmap By PTIS, LLC & Priority Metrics Group, LLC Prepared for The Flexible Packaging Association 185 Admiral Cochrane Drive, Suite 105, Annapolis MD 21401 December 2020 1 © 2020 Flexible Packaging Association 2 About the Flexible Packaging Association The Flexible Packaging Association is the voice of the U.S. manufacturers of flexible packaging and their suppliers. The association’s mission is connecting, advancing, and leading the flexible packaging industry. Flexible packaging represents over $33 billion in annual sales in the U.S. and is the second largest and one of the fastest growing segments of the packaging industry. Flexible packaging is produced from paper, plastic, film, aluminum foil, or any combination of those materials, and includes bags, pouches, labels, liners, wraps, rollstock, and other flexible products. About PTIS PTIS, LLC is a leading business and technology management company focused on Creating Value Through Packaging© and helping clients throughout the packaging value chain develop long term packaging strategies and programs. PTIS, recognized for foresight, thought leadership, and the success of their 20 year Future of Packaging program, helps companies achieve and incorporate these elements into their innovation programs, e-commerce, holistic productivity, sustainability, holistic design, and consumer/retail insights related to packaging. To learn more about PTIS, visit their website www.ptisglobal.com About PMG PMG provides B2B market research, analysis, and consultation services designed to generate profitable growth for our clients. Our firm works with leading organizations in a variety of manufacturing and service industries. We are experts at gathering and processing market information, analyzing data, and translating information into actionable growth initiatives.