DOCSLIB.ORG

Stornext Man Pages

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Stornext Man Pages Man Pages Reference Guide StorNext 4.7.1 6-67930-03 Rev A StorNext 4.7.1 Man Pages Reference Guide 6-67930-03 Rev A April 2014 Quantum Corporation provides this publication “as is” without warranty of any kind, either express or implied, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. Quantum Corporation may revise this publication from time to time without notice. COPYRIGHT STATEMENT © 2014 Quantum Corporation. All rights reserved. Your right to copy this manual is limited by copyright law. Making copies or adaptations without prior written authorization of Quantum Corporation is prohibited by law and constitutes a punishable violation of the law. TRADEMARK STATEMENT Quantum, the Quantum logo, DLT, DLTtape, the DLTtape logo, Scalar, StorNext, the DLT logo, DXi, GoVault, SDLT, StorageCare, Super DLTtape, and SuperLoader are registered trademarks of Quantum Corporation in the U.S. and other countries. Protected by Pending and Issued U.S. and Foreign Patents, including U.S. Patent No. 5,990,810. LTO and Ultrium are trademarks of HP, IBM, and Quantum in the U.S. and other countries. All other trademarks are the property of their respective companies. Specifications are subject to change without notice. StorNext utilizes the following components which are copyrighted by their respective entities: ACSAPI, copyright © Storage Technology Corporation; Java, copyright © Oracle Corporation; LibICE, LibSM, LibXau, LibXdmcp, LibXext, LibXi copyright The Open Group; LibX11copyright The Open Group, MIT, Silicon Graphics, and the Regents of the University of California, and copyright (C) 1994-2002 The XFree86 Project, Inc. All Rights Reserved. And copyright (c) 1996 NVIDIA, Corp. NVIDIA design patents pending in the U.S. and foreign countries.; Libxml2 and LibXdmcp, copyright MIT; MySQL, copyright © Oracle Corporation; Ncurses, copyright © 1997-2009,2010 by Thomas E. Dickey <[email protected] >. All Rights Reserved.; TCL/TK, copyright © Sun Microsystems and the Regents of the University of California; vixie-cron: copyright Internet Systems Consortium (ISC); Wxp-tdi.h, copyright © Microsoft Corporation; Zlib, copyright © 1995-2010 Jean-loup Gailly and Mark Adler without notice. ii StorNext 4.7.1 Man Pages Reference Guide 6-67930-03 Rev A April 2014 Introduction Quantum recommends using the GUI to complete most StorNext tasks, but there might be situations where you prefer or need to use the command line interface (CLI) instead. This document is a printed version of the man pages as they currently exist in StorNext. For each command, information similar to the following is provided: • name • synopsis • description • options • examples • see also Note: Storage Manager commands are only available on Linux MDC systems. Note: On a Windows Vista system, when you run applications from the command line that require administrative privileges (such as those provided by cygwin ), you can start the CLI application either from an elevated shell environment or a DOS shell. If you do not, CLI commands requiring administrative privileges will fail and you will receive an error message indicating that you do not have sufficient privileges to run the command. To start the shell in elevated mode, right-click the icon for Command Prompt or Cygwin and select Administrative Mode. Using Commands or Viewing man Pages The man pages are contained within this document, and can also be accessed via the command line. Use the following procedure to view the man page for a command. 1 Source the StorNext profile. Do one of the following: • If using the bash shell, at the command prompt, type: source /usr/adic/.profile • If using the csh or tcsh shell, at the command prompt, type: source /usr/adic/.cshrc 2 View the man page for a command. At the command prompt, type: Introduction iii StorNext 4.7.1 Man Pages Reference Guide 6-67930-03 Rev A April 2014 man <command> where <command> is the command for which you want to view the man page. 3 Press <Spacebar> to page through the man page. 4 When you are finished, type q and press <Enter> to exit the man page. Paging through man pages may work differently depending on the viewer specified by the $PAGER environmental variable. iv Using Commands or Viewing man Pages StorNext 4.7.1 Man Pages Reference Guide 6-67930-03 Rev A April 2014 Contacting Quantum More information about StorNext is available on the Quantum Service and Support website at http://www.quantum.com/ServiceandSupport . The Quantum Service and Support website contains a collection of information, including answers to frequently asked questions (FAQs). To request a software upgrade, visit http://www.quantum.com/ ServiceandSupport/Upgrade/Index.aspx . For further assistance, or if training is desired, contact the Quantum Technical Assistance Center. Contacts Quantum company contacts are listed below. Quantum Home Page Visit the Quantum home page at: http://www.quantum.com Getting More StorageCare™, Quantum’s comprehensive service approach, leverages advanced Information or Help data access and diagnostics technologies with cross-environment, multi-vendor expertise to resolve backup issues faster and at lower cost. Accelerate service issue resolution with these exclusive Quantum StorageCare services: • Service and Support Website - Register products, license software, browse Quantum Learning courses, check backup software and operating system support, and locate manuals, FAQs, firmware downloads, product updates and more in one convenient location. Benefit today at: http://www.quantum.com/ServiceandSupport/Index.aspx • eSupport - Submit online service requests, update contact information, add attachments, and receive status updates via email. Online Service accounts are free from Quantum. That account can also be used to access Quantum’s Knowledge Base, a comprehensive repository of product support information. Sign up today at: http://www.quantum.com/osr For further assistance, or if training is desired, contact the Quantum Customer Support Center: United States 1-800-284-5101 (toll free) +1-720-249-5700 EMEA +800-7826-8888 (toll free) +49-6131-3241-1164 APAC +800-7826-8887 (toll free) +603-7953-3010 Contacting Quantum v StorNext 4.7.1 Man Pages Reference Guide 6-67930-03 Rev A April 2014 For worldwide support: http://www.quantum.com/ServiceandSupport/Index.aspx Worldwide End-User For more information on the Quantum Worldwide End-User Standard Limited Product Warranty Product Warranty: http://www.quantum.com/serviceandsupport/warrantyinformation/index.aspx vi Contacting Quantum Table of Contents StorNext Filesystem Commands cnvt2ha.sh (1) 1 cvadmin (1) 3 cvaffinity (1) 11 cvcp (1) 13 cvdb (1) 16 cvdbset (1) 22 cvfs (1) 27 cvfsck (1) 28 cvfs_config (4) 32 cvfsd (8) 33 cvfs_failover(1) 34 cvfsid (1) 36 cvgather (1) 37 cvlabel (1) 39 cvmkdir (1) 44 cvmkfile (1) 45 cvmkfs (1) 46 cvpaths (4) 47 cvupdatefs (1) 51 cvversions (1) 55 deviceparams (4) 56 dpserver (4) 57 fsforeignservers (4) 59 fsm (8) 60 fsmlist (4) 61 fsmpm (8) 62 fsnameservers (4) 64 fsports (4) 65 fsroutes (4) 68 fs_scsi (1) 69 ha_peer (4) 71 has_snfs_label (1) 72 Mio (1) 73 mount_cvfs (1) 77 nss_cctl (4) 89 qos_config (1) 92 qustat (1) 93 sncfgconvert (1) 97 sncfgedit (1) 99 sncfginstall (1) 100 sncfgquery (1) 101 sncfgremove (1) 103 sncfgtemplate (1) 104 sncfgvalidate (1) 105 sndiskmove (1) 106 sndpscfg (1) 107 snfs.cfg (5) 108 snfs.cfgx (5) 120 snfs_config (5) 127 -2- snfsdefrag (1) 140 snfs_ras (4) 145 snhamgr (1) 151 snhamgr_daemon (8) 154 snlatency(1) 156 snlicense (1) 157 snmetadump (1) 160 snpolicy(1) 164 snpolicyd.conf (5) 177 snpolicy_gather (1) 182 snquota (1) 183 takeover_ip (1) 187 vidio (1) 188 vidiomap (1) 190 vip_control (1) 192 was.conf (5) 193 StorNext Storage Manager Commands dbdropfs (1) 197 dm_foreign (1) 198 dm_info (1) 199 dm_master (1) 201 dm_session (1) 202 dm_trunc (1) 203 dm_util (1) 204 exclusions (4) 207 fhpath (1) 211 filesystems (4) 212 fsactivevault (1) 215 fsaddclass (1) 219 fsaddrelation (1) 224 fsaffinity (1) 226 fsaltnode (1) 227 fsautoconfig (1) 229 fsbulkcreate (1) 230 fscancel (1) 234 fschdiat (1) 235 fschfiat (1) 237 fschmedstate (1) 239 fschstate (1) 241 fsclassinfo (1) 242 fsclassrnm (1) 245 fsclean (1) 246 fsconfig (1) 249 fsddmconfig (1) 252 fsdefrag (1) 256 fsdevice (1) 259 fsdirclass (1) 261 fsdiskcfg (1) 262 fsdismount (1) 264 fsdrvclean (1) 265 -3- fsdumpnamespace (1) 266 fsexclusioncheck (1) 267 fsextlog (1) 269 fsfilecopy(1) 270 fsfileinfo (1) 272 fsfiletapeloc (1) 274 fs_fmoverc (1) 276 fsforeignstatus (1) 278 fsformat (1) 279 fsgetclasses (1) 280 fshistrpt (1) 281 fsimportnamespace (1) 283 fslocate (1) 285 fsloglevel(1) 286 fs_mapper (1) 287 fsmedcopy(1) 289 fsmedin (1) 292 fsmedinfo (1) 294 fsmedlist (1) 297 fsmedloc (1) 299 fsmedout (1) 300 fsmedread (1) 302 fsmedscan (1) 303 fsmedwrite (1) 305 fsmodclass (1) 307 fsmount (1) 311 fsmoverpt (1) 312 fspolicy(1) 313 fspostrestore (1) 316 fsqueue (1) 318 fsrecover(1) 321 fsrelocate (1) 324 fsretrieve (1) 325 fsrmclass (1) 327 fsrmcopy(1) 328 fsrmdiskcopy(1) 329 fsrminfo (1) 330 fsrmrelation (1) 331 fsschedlock (1) 332 fsschedule (1) 335 fsstate (1) 340 fsstore (1) 342 fsusedspace (1) 344 fsversion (1) 345 fswascfg (1) 346 fsxsd (1) 349 health_check (l) 350 maptst (1) 355 mmportinfo (l) 356 pr_util (1) 358 showc (1) 359 snbackup (1) 360 snbackup_cron_util (1) 362 -4- snbkpreport (1) 363 sncompare (1) 364 snmsm (l) 374 snrestore (1) 376 sntsm (1) 379 vsarchiveeject (l) 383 vsarchiveenter (l) 387 vsarchiveqry (l) 391 vsarchivevary (l) 395 vsaudit (l)
Load more

Recommended publications
  • Sequence Listings Webinar Suzannah K. Sundby Carl Oppedahl
    Suzannah K. Sundby Canady + Lortz LLP Sequence Listings Webinar January 9, 2018 – Updated Version Carl Oppedahl Oppedahl Patent Law Firm LLC DISCLAIMER These materials and views expressed today reflect only the personal views of the author and do not necessarily represent the views of other members and clients of the author’s organizations. These materials are public information and have been prepared solely for educational purposes to contribute to the understanding of U.S. intellectual property law. While every attempt was made to ensure that these materials are accurate, errors or omissions may be contained therein, for which any liability is disclaimed. These materials and views are not a source of legal advice and do not establish any form of attorney-client relationship with the authors and their law firms. Why are some sequence errors not identified by Checker? Is “SEQ ID NO” required before sequences in Specifications? Do you recommend using the PatentIn Software? How do you correct sequence listing errors in PCTs? What about the new WIPO ST.26 Standard? Is Checker worthwhile? How can I easily edit sequence listings generated by others? Can I use other software to generate sequence listings? How do I file sequence listings using EFS-Web and ePCT? How long does it take the USPTO to review and approve? Any risk TYFNIL of using certain sequence descriptors? Help! IT locked down my computer… what do I do? Any sequence listing tips? Why Practitioners Should Know and Do Usually lack of time to send to outside vendors Last minute changes to applications (apps) containing sequences (seqs) Particularly, changes to claims Not hostage to staff/vendors, overtime, etc.
    [Show full text]
  • BEA TUXEDO Reference Manual Section 5 - File Formats and Data Descriptions
    BEA TUXEDO Reference Manual Section 5 - File Formats and Data Descriptions BEA TUXEDO Release 6.5 Document Edition 6.5 February 1999 Copyright Copyright © 1999 BEA Systems, Inc. All Rights Reserved. Restricted Rights Legend This software and documentation is subject to and made available only pursuant to the terms of the BEA Systems License Agreement and may be used or copied only in accordance with the terms of that agreement. It is against the law to copy the software except as specifically allowed in the agreement. This document may not, in whole or in part, be copied photocopied, reproduced, translated, or reduced to any electronic medium or machine readable form without prior consent, in writing, from BEA Systems, Inc. Use, duplication or disclosure by the U.S. Government is subject to restrictions set forth in the BEA Systems License Agreement and in subparagraph (c)(1) of the Commercial Computer Software-Restricted Rights Clause at FAR 52.227-19; subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013, subparagraph (d) of the Commercial Computer Software--Licensing clause at NASA FAR supplement 16-52.227-86; or their equivalent. Information in this document is subject to change without notice and does not represent a commitment on the part of BEA Systems. THE SOFTWARE AND DOCUMENTATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. FURTHER, BEA Systems DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE USE, OR THE RESULTS OF THE USE, OF THE SOFTWARE OR WRITTEN MATERIAL IN TERMS OF CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE.
    [Show full text]
  • The AWK Programming Language
    The Programming ~" ·. Language PolyAWK- The Toolbox Language· Auru:o V. AHo BRIAN W.I<ERNIGHAN PETER J. WEINBERGER TheAWK4 Programming~ Language TheAWI(. Programming~ Language ALFRED V. AHo BRIAN w. KERNIGHAN PETER J. WEINBERGER AT& T Bell Laboratories Murray Hill, New Jersey A ADDISON-WESLEY•• PUBLISHING COMPANY Reading, Massachusetts • Menlo Park, California • New York Don Mills, Ontario • Wokingham, England • Amsterdam • Bonn Sydney • Singapore • Tokyo • Madrid • Bogota Santiago • San Juan This book is in the Addison-Wesley Series in Computer Science Michael A. Harrison Consulting Editor Library of Congress Cataloging-in-Publication Data Aho, Alfred V. The AWK programming language. Includes index. I. AWK (Computer program language) I. Kernighan, Brian W. II. Weinberger, Peter J. III. Title. QA76.73.A95A35 1988 005.13'3 87-17566 ISBN 0-201-07981-X This book was typeset in Times Roman and Courier by the authors, using an Autologic APS-5 phototypesetter and a DEC VAX 8550 running the 9th Edition of the UNIX~ operating system. -~- ATs.T Copyright c 1988 by Bell Telephone Laboratories, Incorporated. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy­ ing, recording, or otherwise, without the prior written permission of the publisher. Printed in the United States of America. Published simultaneously in Canada. UNIX is a registered trademark of AT&T. DEFGHIJ-AL-898 PREFACE Computer users spend a lot of time doing simple, mechanical data manipula­ tion - changing the format of data, checking its validity, finding items with some property, adding up numbers, printing reports, and the like.
    [Show full text]
  • C:\Andrzej\PDF\ABC Nagrywania P³yt CD\1 Strona.Cdr
    IDZ DO PRZYK£ADOWY ROZDZIA£ SPIS TREFCI Wielka encyklopedia komputerów KATALOG KSI¥¯EK Autor: Alan Freedman KATALOG ONLINE T³umaczenie: Micha³ Dadan, Pawe³ Gonera, Pawe³ Koronkiewicz, Rados³aw Meryk, Piotr Pilch ZAMÓW DRUKOWANY KATALOG ISBN: 83-7361-136-3 Tytu³ orygina³u: ComputerDesktop Encyclopedia Format: B5, stron: 1118 TWÓJ KOSZYK DODAJ DO KOSZYKA Wspó³czesna informatyka to nie tylko komputery i oprogramowanie. To setki technologii, narzêdzi i urz¹dzeñ umo¿liwiaj¹cych wykorzystywanie komputerów CENNIK I INFORMACJE w ró¿nych dziedzinach ¿ycia, jak: poligrafia, projektowanie, tworzenie aplikacji, sieci komputerowe, gry, kinowe efekty specjalne i wiele innych. Rozwój technologii ZAMÓW INFORMACJE komputerowych, trwaj¹cy stosunkowo krótko, wniós³ do naszego ¿ycia wiele nowych O NOWOFCIACH mo¿liwoYci. „Wielka encyklopedia komputerów” to kompletne kompendium wiedzy na temat ZAMÓW CENNIK wspó³czesnej informatyki. Jest lektur¹ obowi¹zkow¹ dla ka¿dego, kto chce rozumieæ dynamiczny rozwój elektroniki i technologii informatycznych. Opisuje wszystkie zagadnienia zwi¹zane ze wspó³czesn¹ informatyk¹; przedstawia zarówno jej historiê, CZYTELNIA jak i trendy rozwoju. Zawiera informacje o firmach, których produkty zrewolucjonizowa³y FRAGMENTY KSI¥¯EK ONLINE wspó³czesny Ywiat, oraz opisy technologii, sprzêtu i oprogramowania. Ka¿dy, niezale¿nie od stopnia zaawansowania swojej wiedzy, znajdzie w niej wyczerpuj¹ce wyjaYnienia interesuj¹cych go terminów z ró¿nych bran¿ dzisiejszej informatyki. • Komunikacja pomiêdzy systemami informatycznymi i sieci komputerowe • Grafika komputerowa i technologie multimedialne • Internet, WWW, poczta elektroniczna, grupy dyskusyjne • Komputery osobiste — PC i Macintosh • Komputery typu mainframe i stacje robocze • Tworzenie oprogramowania i systemów komputerowych • Poligrafia i reklama • Komputerowe wspomaganie projektowania • Wirusy komputerowe Wydawnictwo Helion JeYli szukasz ]ród³a informacji o technologiach informatycznych, chcesz poznaæ ul.
    [Show full text]
  • IBM VM/370 (Ems) Terminal User's Guide for FORTRAN IV Program Product Program Products
    SC28-6891-1 IBM VM/370 (eMS) Terminal User's Guide for FORTRAN IV Program Product Program Products Program Numbers 5734-F01 5734-F02 5734-F03 5734-LM1 5734-LM3 Page of SC28-6891-0,-1 Revised May 13, 1977 By TNL SN20-922S Second Edition (April 1975) This edition, as amended by technical newsletters SN20-9201 and SN20-9225, applies to Release 1.0 of the IBM Virtual Machine Facility/370 (VM/370) (CMS). This edition is a reprint of SC28-6891-0 incorporating changes released in Technical Newsletters SN28-0609 (dated March 1, 1973) and SN28-0620 (dated January 3, 1974). Changes are listed in the Summary of Amendments, Number 3, on the facing page. Information in this publication is subject to significant change. Any such changes will be published in new editions or technical newsletters. Before using the publication, consult the latest IBM System/360 Bibliography, GC20-0360, or IBM System/370 Bibliography, GC20-0001, and the technical newsletters that amend the particular bibliography, to learn which editions are applicable and current. Requests for copies of IBM publications shou'ld be made to your IBM representative or to the IBM branch office that serves your locality. Forms for readers' comments are provided at the back of this publication. If the forms have been removed, address comments to IBM Corporation, P. O. Box 50020, Programming Publishing, San Jose, California 95150. Comments and suggesti~ns become the property of IBM. © Copyright International Business Machines Corporation 1972 Summary of Amendments Number 1 Date of Publication: March 1, 1973 Form of Publication: TNL SN28-0609 to SC28-6891-0 CP and CMS Command Abbreviations Maintenance: Documentation Only Valid abbreviations have been added to the summary descriptions of significant CP and CMS commands.
    [Show full text]
  • Journal Import Requirements and Technical Guidance
    Journal Import Requirements and Technical Guidance Document Purpose The purpose of this document is to provide technical requirements information regarding the Journal Import process for those involved in the remediation of systems impacted by Workday Release 4 functionality. Prior to Workday Release 4 in July 2017, journal import utilizes the Journal Staging Area (JSA). This document provides information about the design that will be used to replace the JSA process of uploading files into Oracle with the new process for loading files into Workday. The process covers both non-Internal Service Provider (non-ISP) and Internal Service Provider (ISP) Journal Imports. Process Due to the large number of JSA sources, one of the guiding principles for the new Journal Import process has been that the overall process should feel familiar and require minimal training for end-users. In order to accomplish this goal, the design(s) utilizes the existing Managed File Transfer (MFT) source directories; the file formats, while different, utilize a file format that contains a Header (GLH) record and multiple Detail (GLD) records. The formats can be viewed in the template file - ISP and non-ISP journal file layouts. The designers of the process are aware that there are use cases that will require some sources to submit both JSA files to be routed to EBS at the same time that they are submitting Journal Import files to be imported into Workday. This use case is very constrained and will only last for a very short period of time. If you think this may apply to you, the team would like to hear from you.
    [Show full text]
  • Streampix 5 Tech Support:[email protected]
    Norpix Inc - www.norpix.com StreamPix 5 Tech Support:[email protected] STREAMPIX 5 Copyright Norpix Inc. (C) 2009-2013 StreamPix5 - Copyright Norpix Inc. (C) 2013 (1/187) Norpix Inc - www.norpix.com StreamPix 5 Tech Support:[email protected] Table of Contents About StreamPix 5...................................................................................................................................8 Minimum system requirements................................................................................................................9 Installing StreamPix...............................................................................................................................10 Authorization codes...............................................................................................................................11 StreamPix 5 Basics................................................................................................................................12 Ribbon Interface overview.................................................................................................................12 Faster !..........................................................................................................................................14 Default list of Keyboard Shortcuts.................................................................................................15 The Sequence slider ....................................................................................................................16
    [Show full text]
  • The UNIX Time- Sharing System
    1. Introduction There have been three versions of UNIX. The earliest version (circa 1969–70) ran on the Digital Equipment Cor- poration PDP-7 and -9 computers. The second version ran on the unprotected PDP-11/20 computer. This paper describes only the PDP-11/40 and /45 [l] system since it is The UNIX Time- more modern and many of the differences between it and older UNIX systems result from redesign of features found Sharing System to be deficient or lacking. Since PDP-11 UNIX became operational in February Dennis M. Ritchie and Ken Thompson 1971, about 40 installations have been put into service; they Bell Laboratories are generally smaller than the system described here. Most of them are engaged in applications such as the preparation and formatting of patent applications and other textual material, the collection and processing of trouble data from various switching machines within the Bell System, and recording and checking telephone service orders. Our own installation is used mainly for research in operating sys- tems, languages, computer networks, and other topics in computer science, and also for document preparation. UNIX is a general-purpose, multi-user, interactive Perhaps the most important achievement of UNIX is to operating system for the Digital Equipment Corpora- demonstrate that a powerful operating system for interac- tion PDP-11/40 and 11/45 computers. It offers a number tive use need not be expensive either in equipment or in of features seldom found even in larger operating sys- human effort: UNIX can run on hardware costing as little as tems, including: (1) a hierarchical file system incorpo- $40,000, and less than two man years were spent on the rating demountable volumes; (2) compatible file, device, main system software.
    [Show full text]
  • K-Watch & K-Manager Pro Application Software User
    K-Watch & K-Manager Pro Application Software User Manual K-Watch & K-Manager Pro Patent Information This product may be protected by one or more patents. For further information, please visit: www.grassvalley.com/patents/ Copyright and Trademark Notice Grass Valley®, GV® and the Grass Valley logo and/or any of the Grass Valley products listed in this document are trademarks or registered trademarks of GVBB Holdings SARL, Grass Valley USA, LLC, or one of its affiliates or subsidiaries. All other intellectual property rights are owned by GVBB Holdings SARL, Grass Valley USA, LLC, or one of its affiliates or subsidiaries. All third party intellectual property rights (including logos or icons) remain the property of their respective owners. Copyright © 2021 GVBB Holdings SARL and Grass Valley USA, LLC. All rights reserved. Specifications are subject to change without notice. Terms and Conditions Please read the following terms and conditions carefully. By using K-Watch and K- Manager Pro documentation, you agree to the following terms and conditions. Grass Valley hereby grants permission and license to owners of K-Watch and K- Manager Pro to use their product manuals for their own internal business use. Manuals for Grass Valley products may not be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose unless specifically authorized in writing by Grass Valley. A Grass Valley manual may have been revised to reflect changes made to the product during its manufacturing life. Thus, different versions of a manual may exist for any given product.
    [Show full text]
  • Verhalten, Kommunikation Und Interaktion in Virtuellen 3D-Umgebungen
    Verhalten, Kommunikation und Interaktion in Virtuellen 3D-Umgebungen DISSERTATION der Fakultät für Informatik der Eberhard-Karls-Universität Tübingen zur Erlangung des Grades eines Doktors der Naturwissenschaften (Dr. rer. nat.) vorgelegt von DIPL.-BIOL.JÜRGEN FECHTER aus Sigmaringen Tübingen 1999 Tag der mündlichen Qualifikation: 7. Juli 1999 Dekan: Prof. Dr. Klaus-Jörn Lange 1. Berichterstatter: Prof. Dr. Wolfgang Straßer 2. Berichterstatter: Prof. Dr. Wolfgang Rosenstiel Zusammenfassung Zu Beginn der Arbeit 1993 mußten zuerst die Grundlagen und die Basis für den Bereich der Virtuellen Realität erarbeitet werden. Es werden deshalb 3D-Geräte, Grundlagen und Techniken, Formen der Interaktion sowie angrenzende Bereiche, wie beispielsweise Netzwerkprotokolle, behandelt. Im Kern stellt diese Arbeit erstmalig ein generisches Konzept für den Austausch von Nachrichten zwischen 3D-Objekten vor. Es werden die Möglichkeiten und Grenzen dieses Modells, das allgemein Messageconcept genannt wurde, aufgezeigt. Ferner wird die Adaption des Messageconcept auf verschiedene andere Einsatzebenen dargestellt. Besonders wird hier auf eine VRML-basierte Lösung eingegangen, die auch als Vorschlag dem VRML-Konsortium eingereicht wurde. Der Austausch der Nachrichten ist nicht auf eine Applikation beschränkt, sondern kann auch netzwerktransparent erfolgen. Auf die enthaltenen Multi-User-Erweiterungen wird im Zusammenhang mit dieser Arbeit nicht eingegangen. Für die Verifikation des allgemeinen Messageconcept wurde eine Anwendung aus dem medizinischen Bereich, ein sogenannter Lichtkasten (engl. Alternator), an dem Röntgenaufnahmen befestigt werden, inklusive dazugehörigem Raum, verwendet. Im Gegensatz zu industriellen Lösungen, welche die Umgebung der Radiologen auf die Darstellung der zweidimensionalen medizinischen Bilder beschränken, bildet diese Applikation den dreidimensionalen Arbeitsraum ab. Neben dem Vorteil, daß diese Abbildung aus der realen Welt für einen nicht-computererfahrenen Mediziner intuitiv verständlich ist, steht der Nachteil des höheren Eingabeaufwands.
    [Show full text]
  • Introduction to UPC
    Introduction to UPC Presenter: Rajesh Nishtala (UC Berkeley) Advisor: Katherine Yelick Joint work with Berkeley UPC and Titanium Groups Lawrence Berkeley Nat’l Labs & UC Berkeley Some slides adapted from Katherine Yelick and Tarek El- Ghazawi Berkeley UPC: http://upc.lbl.gov 1 Titanium: http://titanium.cs.berkeley.edu Context • Most parallel programs are written using either: – Message passing with a SPMD model • Usually for scientific applications with C++/Fortran • Scales easily – Shared memory with threads in OpenMP, Threads+C/C++/F or Java • Usually for non-scientific applications • Easier to program, but less scalable performance • Global Address Space (GAS) Languages take the best of both – global address space like threads (programmability) – SPMD parallelism like MPI (performance) – local/global distinction, i.e., layout matters (performance) Berkeley UPC: http://upc.lbl.gov 2 Titanium: http://titanium.cs.berkeley.edu Partitioned Global Address Space Languages • Explicitly-parallel programming model with SPMD parallelism – Fixed at program start-up, typically 1 thread per processor • Global address space model of memory – Allows programmer to directly represent distributed data structures • Address space is logically partitioned – Local vs. remote memory (two-level hierarchy) • Programmer control over performance critical decisions – Data layout and communication • Performance transparency and tunability are goals – Initial implementation can use fine-grained shared memory • Multiple PGAS languages: UPC (C), CAF (Fortran), Titanium
    [Show full text]
  • User's Guide to Seqninja™ (Command-Line Edition)
    User's Guide to SeqNinja™ (Command-Line Edition) DNASTAR, Inc. 2014 Contents Before You Begin ...........................................................................................................................4 Overview .........................................................................................................................................5 Getting Started with SeqNinja ......................................................................................................6 Editing in the SeqNinja Shell ........................................................................................................8 Command-Line Options ................................................................................................................8 Supported File Formats .................................................................................................................9 The SeqNinja Language ..............................................................................................................10 Language Overview .................................................................................................................10 Escape Codes ...........................................................................................................................11 File Patterns .............................................................................................................................12 Settings .....................................................................................................................................13
    [Show full text]