Osmo Natural Oil Woodstain PRODUCT INFORMATION

Home , Wood stain

The following Product Datasheet is provided by Osmo

Wood Finishes Direct cannot be held liable for the information contained within this document.

For purchasing information visit: Osmo Natural Oil Woodstain PRODUCT INFORMATION | EXTERIOR

NATURAL OIL WOODSTAIN Twice as much coverage through high oil content – saves time and money!

700 702 703 706 707 708 Pine Larch Mahogany Oak Walnut Teak

710 712 727 728 729 731 Stone Pine Ebony Rosewood Cedar Fir Green Oregon Pine

26 m2 / 1l

732 900 903 905 906 907

Quartz Grey White Basalt Grey Patina Pearl Grey Quartz Grey 1 COAT

PRODUCT DESCRIPTION Detailed declaration of ingredients available upon re- Decorative, satin protective wood finish based on na- quest. tural oils for any exterior wood. Microporous surface allows the wood to breathe and TECHNICAL DATA reduces swelling and shrinkage. Water-repellent, ex- Specific gravity: 0.95-1.1 g/cm³ tremely weather-resistant and UV-stable surface does Viscosity: 30-60s DIN EN ISO 2431/3 mm, viscid not crack, peel, flake or blister. Odour: faint/mild, after drying odourless No sanding necessary, just simply recoat; no primer Flash point: >61°C acc. DIN EN ISO 2719 is needed. Easy and seamless application. Finish stays workable while coating. STORAGE Finish contains active ingredients to protect against Up to 5 years and longer if can is kept dry and closed mould, algae and fungal attack and has proven itself tightly. If thickened by frost, store for 24-36 hours at over decades and also under extreme climatic con- room temperature before use. ditions. SURFACE PREPARATION RECOMMENDED USE Wood surface must be clean, dry and frost-free (mois- Osmo Natural Oil Woodstain is ideal for any exterior ture content max. 20%). wood: doors, windows and window shutters (dimen- Osmo Natural Oil Woodstain is ready to use, please sionally stable elements), carports, timber cladding, do not thin. Stir well before use. balconies, fences, pergolas, garden furniture and Clean old microporous stains thoroughly. Old paints summer houses (dimensionally unstable elements). and lacquers must be completely removed. As a gen- eral rule, wear a dust mask during sanding works. If possible, please apply base coat to all sides before INGREDIENTS installation. Based on natural plant oils (sunflower oil, soya oil, this- The finished surface is, among other things, influenced tle oil and linseed oil), iron oxide and organic pigments, by the wood‘s natural characteristics. Therefore, a trial titanium dioxide white pigments, siccatives (drying application is always required, especially for unfamiliar agents) and additives. Biocidal active ingredient: Pro- surfaces. piconazole. Dearomatized white spirit (benzene-free). If additional protection against blue stain, rot and in- This product fulfils EU regulations (2004/42/EC) ac- sects is desired, pre-treat the wood if possible on all cording to the VOC content of max. 400 g/l (Cat. A/e sides with Osmo WR Base Coat*. (2010)).

Page 1 - NATURAL OIL WOODSTAIN

Osmo Holz und Color GmbH & Co. KG · Affhüppen Esch 12 · D-48231 Warendorf Phone +49 (0)2581/922-100 · Fax +49 (0)2581/922-200 · [email protected] · www.osmo.de PRODUCT INFORMATION | EXTERIOR

*Use biocides safely. Always read label and product are to be carried out. In accordance with the latest information before use. technical research, permanent protection against algae and fungal attack cannot be provided. METHODS OF APPLICATION Apply thinly and evenly to the clean and dry wood CAUTION along the wood grain with Osmo Natural Bristle Brush Keep out of the reach of children. Do not get in eyes, or Osmo Microfibre Roller and spread well. on skin, or on clothing. Contains 2-butanonoxime and Allow to dry for approx. 4-6 hours with good ventil- propiconazole. May produce an allergic reaction. If ation. After drying, apply a second coat also thinly and medical advice is needed, have product container or quickly. label at hand. Use only outdoors or in a well-ventilated When renovating, one coat applied to the clean and area. Harmful to aquatic life with long lasting effects. dry surface usually suffices. Avoid release to the environment. Dispose if contents/ container in accordance with chemical waste disposal CLEANING OF TOOLS regulations (EAK 08 01 11). Warning: Wash out any used cloth impregnated with this product immediately With Osmo Brush Cleaner (free of aromatic com- after use or store in an airtight container (danger of pounds). self-ignition). The dried finish is classified as B2 (normal flammability) according to DIN 4102 regulations. DRYING TIME Safety data sheet upon request. Approx. 12 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or DISPOSAL higher air humidity can increase the drying time. Allow Dispose of leftover product and completely emp- for good ventilation while drying. tied packaging according to local official guidelines (waste code number 08 01 11). Only completely emp- COVERAGE tied cans can be recycled. 1 litre covers approx. 26 m² sanded wood and approx. 12 m² sawn wood with one coat. COLOUR TONES Product coverage depends significantly on the char- 700 Pine acter of the wood. All information refers to smooth 702 Larch and planed/cut surfaces. Other surfaces may lead to 703 Mahogany reduced coverage. 706 Oak 707 Walnut NOTE 708 Teak The transparent colour tone is influenced by the natu- 710 Stone Pine ral tone of the wood and may deviate from the colour 712 Ebony chart. Clear finishes offer no UV protection and are 727 Rosewood therefore not recommended for surfaces exposed to 728 Cedar strong sunlight. Dried surface is satin-glossy at first 729 Fir Green and is afterwards satin. To extend the life of the finish, 731 Oregon Pine it is recommended to apply one final top coat of Osmo 732 Light Oak UV Protection Oil Extra 420 Clear after thoroughly dry- 900 White ing. (Not recommended for White 900). Many wood 903 Basalt Grey species contain water-soluble coloured extractives 905 Patina which may leach out naturally when weathered. All 906 Pearl Grey colour tones can be mixed with each other. 907 Quartz Grey Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones. CAN SIZES Stains allow the subsurface to shine through. De- 0.75 L; 2.50 L; 25 L pending on the wood species, the appearance of the colour tone may deviate from the original RAL/NCS colour tone. The above mentioned information is provided to the Osmo Natural Oil Woodstain contains biocides and is best of our knowledge however without any liability. therefore only to be used on exterior areas. The added active ingredients delay or minimize the risk of algae Version 06/15 and fungal attack. For effective protection, two coats

Page 2 - NATURAL OIL WOODSTAIN

Osmo Holz und Color GmbH & Co. KG · Affhüppen Esch 12 · D-48231 Warendorf Phone +49 (0)2581/922-100 · Fax +49 (0)2581/922-200 · [email protected] · www.osmo.de PRODUCT INFORMATION | EXTERIOR

NATURAL OIL WOODSTAIN CLEAR Protective matt wood finish as a top coat or self-priming finish! 26 m2 / 1l

701 Clear 1 COAT Matt

PRODUCT DESCRIPTION TECHNICAL DATA Clear, matt wood protective finish based on natural Specific gravity: 0.97-0.99 g/cm³ oils for any exterior wood. Microporous surface allows Viscosity: 25-35s DIN EN ISO 2431/3 mm, viscid the wood to breathe and reduces swelling and shrink- Odour: faint/mild, after drying odourless age. Water-repellent and weather-resistant surface Flash point: >61°C acc. DIN EN ISO 2719 does not crack, peel, flake or blister. No sanding necessary, just simply recoat; no primer STORAGE is needed. Up to 5 years and longer if can is kept dry and closed Easy and seamless application. Finish stays workable tightly. If thickened by frost, store for 24-36 hours at while coating. room temperature before use. Finish contains active ingredients to protect against mould, algae and fungal attack and has proven itself over decades and also under extreme climatic cond-i- SURFACE PREPARATION tions. Wood surface must be clean, dry and frost-free (mois- ture content max. 20%). RECOMMENDED USE Osmo Natural Oil Woodstain Clear is ready to use, please do not thin. Stir well before use. Osmo Natural Oil Woodstain Clear is suitable as a clear matt self-priming finish for vertical surfaces in Clean old microporous stains thoroughly. Old paints protected exterior areas, such as roof soffits, car- and lacquers must be completely removed. As a gen- ports, timber cladding, garden furniture and summer eral rule, wear a dust mask during sanding works. houses. Natural Oil Woodstain 701 Clear offers no UV If possible, please apply base coat to all sides before protection and is therefore not recommended for sur- installation. faces exposed to strong sunlight. Osmo Natural Oil The finished surface is, among other things, influenced Woodstain Clear is also suitable as a clear matt top by the wood‘s natural characteristics. Therefore, a trial coat (only for vertical surfaces) for pigmented Osmo application is always required, especially for unfamiliar exterior wood finishes, such as Osmo Country Colour, surfaces. Osmo Natural Oil Woodstain and Osmo One Coat If additional protection against blue stain, rot and in- Only. Thus an additional naturally matted surface pro- sects is desired, pre-treat the wood if possible on all tection is achieved. sides with Osmo WR Base Coat*. *Use biocides safely. Always read label and product INGREDIENTS information before use. Based on natural plant oils (sunflower oil, soya oil, thistle oil and linseed oil), siccatives (drying agents) METHODS OF APPLICATION and additives. Biocidal active ingredient: Propicona- As a self-priming finish: zole. Dearomatized white spirit (benzene-free). This Apply thinly and evenly to the clean and dry wood product fulfils EU regulations (2004/42/EC) according along the wood grain with Osmo Natural Bristle Brush to the VOC content of max. 400 g/l (Cat. A/i (2010)). or Osmo Microfibre Roller and spread well. Detailed declaration of ingredients available upon re- Allow to dry for approx. 4-6 hours. quest. After drying, quickly apply a second coat also thinly.

Page 1 - NATURAL OIL WOODSTAIN CLEAR

Osmo Holz und Color GmbH & Co. KG · Affhüppen Esch 12 · D-48231 Warendorf Phone +49 (0)2581/922-100 · Fax +49 (0)2581/922-200 · [email protected] · www.osmo.de PRODUCT INFORMATION | EXTERIOR

As a clear matt top coat: CAUTION With Osmo Natural Bristle Brush or Osmo Microfibre Keep out of the reach of children. Do not get in eyes, Roller, apply one coat very thinly and evenly to wood on skin, or on clothing. Contains 2-butanonoxime and previously treated with a pigmented Osmo wood fin- propiconazole. May produce an allergic reaction. If ish and thoroughly dried along the wood grain, and medical advice is needed, have product container or spread well. label at hand. Use only outdoors or in a well-ventilated Important: Base coat must be thoroughly dried! area. Harmful to aquatic life with long lasting effects. When renovating, one coat applied to the clean and Avoid release to the environment. Dispose if contents/ dry surface is usually sufficient. container in accordance with chemical waste disposal regulations (EAK 08 01 11). Warning: Wash out any used cloth impregnated with this product immediately CLEANING OF TOOLS after use or store in an airtight container (danger of With Osmo Brush Cleaner (free of aromatic com- self-ignition). The dried finish is classified as B2 (nor- pounds). mal flammability) according to DIN 4102 regulations. Safety data sheet upon request. DRYING TIME Approx. 12 hours (normal climatic conditions, 23 DISPOSAL °C/50 % rel. humidity). Lower temperatures and/or Dispose of leftover product and completely emp- higher air humidity can increase the drying time. Allow tied packaging according to local official guidelines for good ventilation while drying. (waste code number 08 01 11). Only completely emp- tied cans can be recycled. COVERAGE 1 litre covers approx. 26 m² with one coat. COLOUR TONES Product coverage depends significantly on the cha- 701 Clear Matt racter of the wood. All information refers to smooth and planed/cut surfaces. Other surfaces may lead to reduced coverage. CAN SIZES 0.75 L; 2.50 L; 25 L NOTE Osmo Natural Oil Woodstain 701 Clear offers no UV The above mentioned information is provided to the protection and is therefore not recommended for sur- best of our knowledge however without any liability. faces exposed to strong sunlight. Many wood spe- Version 06/15 cies contain water-soluble coloured extractives which leach out naturally when weathered. Due to high oil content, the coating has a light yellowing effect when used on white finished surfaces. Therefore, we recom- mend using Osmo Natural Oil Woodstain 900 White as a top coat in such cases. Osmo Natural Oil Woodstain 701 Clear contains biocides and is therefore only to be used on exterior areas. The added active ingredients delay or minimize the risk of algae and fungal attack. For effective protection, two coats are to be carried out. In accordance with the latest technical research, permanent protection against algae and fungal attack cannot be provided.

Page 2 - NATURAL OIL WOODSTAIN CLEAR

Osmo Holz und Color GmbH & Co. KG · Affhüppen Esch 12 · D-48231 Warendorf Phone +49 (0)2581/922-100 · Fax +49 (0)2581/922-200 · [email protected] · www.osmo.de