WEATHERPROOFING WOOD STAIN CLEAN up & DISPOSAL • Clean Equipment and Paint Spatters with Warm, Soapy Water

Home , Wood stain

TECHNICAL DATA SHEET KILZ WEATHERPROOFING SOLID COLOUR WOOD STAIN WOOD COATINGS KILZ Weatherproofing Solid Colour Wood Stains feature an advanced 100% acrylic formula that delivers complete protection from the elements for up to 10 years on decks and 25 years on fences and siding. This self-priming product resists cracking, peeling and blistering and SOLID COLOUR delivers excellent protection from the sun’s harmful UV rays. It also hides surface imperfections while allowing the wood texture to show through. Ideal for new to heavily weathered or WEATHERPROOFING aged wood surfaces such as: decks, railings, shakes, shingles, siding, roofs, fences, and WOOD STAIN wood patio furniture. Great for composite decks, too. WHERE TO USE Exterior properly prepared wood and composite surfaces. 2 Thin Coats Required CAUTION: Finished surfaces may become slippery when wet.

FILL LEVEL / MAX TINT • Scuff sand any glossy surfaces. If making • Use a 10 mm nap roller, nylon/polyester L8410C Deep Base repairs, use stainless steel or galvanized nails brush, pad applicator or airless sprayer. 3.43 L / 414 mL to prevent nail staining. Countersink nail Airless spray is recommended for experi- L8411C White / Tint Base heads, repair imperfections and sand smooth. enced applicators only; use a .015 - .019" 3.67 L / 118 mL Remove all dust with a damp cloth, allow to tip. If thinning is required, thin with water at dry. a rate of no more than 240 mL per 3.79 L. SHEEN: N/A • New Wood: use KILZ Wood Cleaner & • Maintain a wet edge when applying. Always Brightener to remove mill glaze and open the back-brush and apply product end to end or COMPOSITION pores of the wood. Lightly sand to remove to board lengths to prevent lap marks. Avoid Vehicle Type: Advanced 100% Acrylic remaining wood fibers/fuzz. applying stain too heavily. Over application Weight Per 3.79 L (kg): 4.6 +/- 0.09 • Weathered Wood: Prepare surface and of stain will lead to surface failure including Volume Solids: 36% +/-2% remove any mildew stains with KILZ Wood peeling and cracking. Weight Solids: 47.5% +/-2% Cleaner & Brightener. Lightly sand to remove • Two thin coats recommended. For optimum Viscosity: 68-75 KU remaining wood fibers/fuzz. performance, coat all six sides of wood. VOC (COV): <100 g/L • Painted Wood Surfaces: To clean a painted DRY TIME The addition of colourants may add VOCs. surface in sound condition, scrub with a mild • 1-2 hours before recoat. Wait 24-48 hours detergent or TSP. To strip an old coating, use FLASHPOINT: N/A before light foot traffic. Allow 72 hours for KILZ Wood Stain & Finish Stripper, then full cure. Cool temperatures and/or high COVERAGE* neutralize with KILZ Wood Cleaner & Brightener. humidity will require additional drying time. 1st Coat 19-37 m2 (200-400 sq. ft.); 2nd Coat • No primer is required on most woods. 37-75 m2 (400-800 sq. ft.) per 3.79 L, However, Redwood, Cedar, Cypress and other depending on the surface texture, porosity and "bleeding" woods contain water soluble application method. Does not include the loss extractives which may cause discolouration of of material from spraying. Two coats are white and pastel colours. Prime the above type ® required for optimal appearance and durability. woods with one coat of KILZ Premium Primer. APPLICATION RECOMMENDED FILM THICKNESS • Must apply between 5-32˚ C. Do not use if rain 2 At 19 m (200 sq. ft.) per 3.79 L: is expected within 24 hours. • Wet: 7.8 mils; Dry: 2.8 mils • The wood surface must be completely dry At 37 m2 (400 sq. ft.) per 3.79 L: before application. • Wet: 3.6 mils; Dry: 1.4 mils • Intermix multiple containers to ensure colour uniformity. Stir product occasionally through- SURFACE PREPARATION out application. • All surfaces must be clean, sound, dry and free of any dirt, oil and grease.

©2013 Masterchem Industries LLC, 3135 Old Hwy M, Imperial, MO 63052-2834 This information is provided “as is” and no representations or warranties, either express or implied, of merchantability, fitness for a particular purpose 1-866-977-3711 • www.kilz.com or of any other nature are made with respect to this information or to any product referred to in this information. For MSDS or to consult with a technical service representative, call 1-866-977-3711. 1 of 2 TECHNICAL DATA SHEET KILZ WEATHERPROOFING SOLID COLOUR WOOD STAIN WOOD COATINGS

SOLID COLOUR WEATHERPROOFING WOOD STAIN CLEAN UP & DISPOSAL • Clean equipment and paint spatters with warm, soapy water. If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current governmental regulations. • Do not dispose of this product down a drain. Please consider donating any unused product. For recycling or disposal information contact your local household refuse collection service. CAUTIONS / LIMITATIONS • Stained surfaces may become slippery when wet. Use caution when walking on surface when moisture is present. • Protect from freezing. • Do not use if rain is expected within 24 hours. • DO NOT THIN PRODUCT • For best results, apply at temperatures between 5° C - 32° C. Temperatures above 32° C may affect the application such as drying too fast. Avoid painting in direct sun. NOTE: If the surface is hot to the touch it should be considered too hot to apply this coating. • Avoid heavy traffic for 24 hours. • Test product for colour on a small hidden area before proceeding • Do not use (L8410C Deep Base) without the addition of tinting colourants • Over application of stain will lead to surface failure including peeling and cracking • Shelf life under normal conditions is two years unopened. GENERAL INFORMATION Keep From Freezing / Read All Directions Before Opening Container WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Hotline at 1-800- 424-LEAD or log on to www.epa.gov/lead. WARNING! Sanding or scraping pressure treated lumber may be hazardous; wear appropriate protection.

MAY IRRITATE EYES AND SKIN. Avoid contact with eyes, skin and clothing. Do not breathe fumes. Keep out of reach of children. Wear eye protection and protective clothing. Use only with adequate ventilation.

FIRST AID • Contains ETHYLENE GLYCOL. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. • If in eyes rinse with water for 15-20 minutes. • If on skin rinse well with water. • If inhaled, move person to fresh air.

CAUTION KEEP OUT OF REACH OF CHILDREN DO NOT TAKE INTERNALLY