Notice of Completion and Authorization to Apply the Ul Mark

NOTICE OF COMPLETION AND AUTHORIZATION TO APPLY THE UL MARK

January 4 , 2019

LANNER ELECTRONICS INC 7TH FL 173 SEC 2 DATONG RD XIZHI DISTRICT NEW TAIPEI CITY, 221 TAIWAN

Our Reference: File E215284, Vol. 3 Sec.(Next) Project Number 4788724372 Your Reference: N/A Project Scope: UL/cUL Investigation for Network Appliance Platform, Model: ODS-HT2xxxxxxx. (where x can be 0-9, A-Z, a-z, any alphanumeric character or blank)

REFERNCE REPORT: E215284, Vol. 3 Sec.(Next)

Dear Ms. Sophy Kuo

Congratulations! UL's investigation of your product(s) has been completed under the above Reference Number and the product was determined to comply with the applicable requirements. This letter temporarily supplements the UL Follow-Up Services Procedure and serves as authorization to apply the UL Mark at authorized factories under UL's Follow-Up Service Program. To provide your manufacturer(s) with the intended authorization to use the UL Mark, you must send a copy of this notice to each manufacturing location currently authorized under File E215284, Vol. 3

Records in the Follow-Up Services Procedure covering the product are now being prepared and will be sent in the near future. Until then, this letter authorizes application of the UL Mark for 90 days from the date indicated above.

Additional requirements related to your responsibilities as the Applicant can be found in the document “Applicant responsibilities related to Early Authorizations” that can be found at the following web-site: http://www.ul.com/EAResponsibilities

Any information and documentation provided to you involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL.

We are excited you are now able to apply the UL Mark to your products and appreciate your business. Feel free to contact me or any of our Customer Service representatives if you have any questions.

Very truly yours, Reviewed by:

Stephen Ho Bruce A. Mahrenholz +886 2 28967790 847-664-3009 Project Engineer CPO Director [email protected] [email protected]

CC: ,

TPI9854-67C203

This is an electronically generated letter. Signatures are not required for this document to be valid. Page 1 of 1 Ref. Certif. No.

DK-79621-UL

IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME

CB TEST CERTIFICATE

Product Network Switch

Name and address of the applicant RADWARE LTD 22 RAOUL WALLENBERG ST 69710 TEL AVIV, ISRAEL

Name and address of the manufacturer RADWARE LTD 22 RAOUL WALLENBERG ST 69710 TEL AVIV, ISRAEL

Name and address of the factory Lanner Electronics Inc. 6F, 22, Zhongxing Road, Xizhi District, New Taipei City 221, Note: When more than one factory, please report on page 2 Taiwan.

Additional Information on page 2

Ratings and principal characteristics AC I/P: 100-127/ 200-240V~, 47-63Hz, 7.1/3.4A (Each) or DC I/P: -42- -72Vdc, 16A (Each)

Trademark (if any)

Type of Customer’s Testing Facility (CTF) Stage used

Model / Type Ref. ODS-HT2xxxxxxx See Page 2

Additional information (if necessary may also be reported on page 2) Additional Information on page 2

A sample of the product was tested and found IEC 62368-1:2014 to be in conformity with

As shown in the Test Report Ref. No. which forms part BTL-CB-1-S1809T047 issued on 2018-12-27 of this Certificate

This CB Test Certificate is issued by the National Certification Body

UL (US), 333 Pfingsten Rd IL 60062, Northbrook, USA UL (Demko), Borupvang 5A DK-2750 Ballerup, DENMARK UL (JP), Marunouchi Trust Tower Main Building 6F, 1-8-3 Marunouchi, Chiyoda-ku, Tokyo 100-0005, JAPAN UL (CA), 7 Underwriters Road, Toronto, M1R 3B4 Ontario, CANADA For full legal entity names see www.ul.com/ncbnames Date: 2019-01-02 Signature:

Jan-Erik Storgaard

1/2 Ref. Certif. No.

DK-79621-UL

Model Details:

ODS-HT2xxxxxxx (where x can be 0-9, A-Z, a-z, any alphanumeric character or blank)

Factories:

Lanner Electronics Inc.

9F, No. 151, Section 2, Datong Road, Xizhi District, New Taipei City 221

Taiwan.

Additional Information:

Additionally evaluated to EN 62368-1:2014/A11:2017

National Difference specified in the CB Test Report

Additional information (if necessary)

Date: 2019-01-02

Signature: Jan-Erik Storgaard

2/2 Ref. Certif. No.

DK-79623-UL