Technical Datasheet: Lustran® 1152

Lustran® 1152 INEOS Styrolution - Acrylonitrile Butadiene Styrene Wednesday, September 29, 2021 General Information Product Description Lustran® 1152 resin is a very high-impact extrusion grade of ABS (acrylonitrile butadiene styrene) with a balance of properties not offered by other grades of ABS. It offers superior toughness, particularly for low-temperature applications, and good thermoformability.

FEATURES • Very high impact strength • Superior toughness, especially in low temperature applications • Ease of coloring • Good thermoformability • UL 94 HB rated

APPLICATIONS • Vehicle instrument panels • Luggage shells • Agricultural equipment • Construction equipment General Material Status • Commercial: Active Availability • Latin America • North America • Good Colorability • High Impact Resistance Features • Good Toughness • Low Temperature Toughness • Agricultural Applications • Construction Applications Uses • Automotive Instrument Panel • Luggage Automotive Specifications • CHRYSLER MS-DB-300 CPN4344 Color: 000000 100% Color Match Forms • Pellets Processing Method • Extrusion • Thermoforming

ASTM & ISO Properties 1 Physical Nominal Value Unit Test Method Density / Specific Gravity 1.03 ASTM D792 Molding Shrinkage - Flow 4.0E-3 to 6.0E-3 in/in ASTM D955 Mechanical Nominal Value Unit Test Method Tensile Modulus (73°F) 220000 psi ASTM D638 Tensile Strength (Yield, 73°F) 4500 psi ASTM D638 Flexural Modulus (73°F) 260000 psi ASTM D790 Flexural Strength 2 (Yield, 73°F) 7000 psi ASTM D790 Impact Nominal Value Unit Test Method Notched Izod Impact ASTM D256 -40°F 4.2 ft·lb/in 0°F 6.5 ft·lb/in 73°F 9.2 ft·lb/in Instrumented Dart Impact ASTM D3763 Peak Energy 264 in·lb Total Energy 444 in·lb

UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved. The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within www.ulprospector.com our control, and we cannot and will not take responsibility for the information or content. Page: 1 of 2 Lustran® 1152 INEOS Styrolution - Acrylonitrile Butadiene Styrene Wednesday, September 29, 2021 Hardness Nominal Value Unit Test Method Rockwell Hardness (R-Scale) 93 ASTM D785 Thermal Nominal Value Unit Test Method Deflection Temperature Under Load (66 psi, Unannealed) 193 °F ASTM D648 Deflection Temperature Under Load (66 psi, Annealed) 206 °F ASTM D648 Deflection Temperature Under Load ASTM D648 264 psi, Unannealed 180 °F Deflection Temperature Under Load (264 psi, Annealed) 195 °F ASTM D648 CLTE - Flow 5.8E-5 in/in/°F ASTM D696 Flammability Nominal Value Unit Test Method Flame Rating HB UL 94 Optical Nominal Value Unit Test Method Gloss (60°) 80 ASTM D523

Processing Information Extrusion Nominal Value Unit Drying Temperature 175 °F Drying Time 2.0 to 4.0 hr Cylinder Zone 1 Temp. 420 to 465 °F Cylinder Zone 2 Temp. 420 to 465 °F Cylinder Zone 3 Temp. 420 to 465 °F Cylinder Zone 4 Temp. 420 to 465 °F Melt Temperature 420 to 480 °F

Notes 1 Typical properties: these are not to be construed as specifications. 2 5% Deflection