Production Multi mode Test Transmitter

Intergrated RF attenuator for high output levels In mass production purpose of test instrument, the signals of various signal generators are combined in a coupling network and then distributed over large capacity. VENTUS F1 offers an optional amplifier for this purpose which can be installed directly in the instrument. VENTUS F1 thus offers extremely high-end a level of performance.

User Centric Mind of control elements and remote operation

AII functions need to be manageable directly on the instrument. On the other hand, it can be possible to configure and monitor all instruments of the entire system via remote control. VENTUS F1 makes that both of way possible - with a keypad and display on the front panel on the one hand and a convenient GUI (T-PUMP) on Embedded Window 7 based for remote operation on the other.

LUMANTEK Catalogue No.15 /2011- PART.1 / TEST & MEASUREMENT for Mobile TV & DTV

Key Features

Embedded Window 7 stand alone signal generator. Multi-Standards in a single 1 RU Test Transmitter Instant, one-click programmable Modulation Option upgrades without costly downtime and unnecessary trips to the factory Truly short switching time to another mode. Frequency range 50-870 MHz in 1 Hz step. Integrated Power Amplifier +10 dBm to -30 dBm(Basic) ,+10 dBm to -110 dBm(Option ), +20 dBm to -20 dBm (optional) Low phase noise and high MER Latest User-friendly application and API (design your own application) can be downloaded from Web based Download Center freely (http://www.lumantek.com) Real time signal with Selectable Modualtion and coding parameter. Direct Stream Play out from external USB memory. Integrated white noise generator (option). TS stream player,TS Recorder, TS Aanalyzer. Best Optimized for use in mass production test system with local control from front LCD panel, and Can be remote controlled from UDP/IP and also remote controlled from PC Monitor, Mouse, that case is operated by via the same convenient Graphical user interface( T-PUMP) as is used for VENTUS F1 and VENTUS 1.0. Low power consumption. Intenal SSD (ROM & Storage) with lightning-fast read/write speeds. Auto temperature compensation. FCC & CE certified. 1/4 Sample Block diagram in Assembly Line Factory

In the mass production of terminal consumer products such as LCDTV, PMP and Mobile hand set TV, number of test signals for multi-standards modulation are required at various frequencies and with different sources. The required signal generators are usually equipped in signal center. The different signals sources are combined in a coupling network and distributed to the each single test site in the production line through a cable, for each frequency, a baseband signal is generated, modulated to the corresponding RF, and then amplified to a RF level before being fed to the distribution network.

VENTUS F1 is purely designed for those demands.

p16 Keypad and LCD on the front panel The LCD lets you view the current settings quickly and easily. Parameters and their settings can be selected with the cursor keys and the [Enter] key.

Easy Licence & Software Upgrades There is no more time-consuming process for upgrading software with Ventus F1. You can perform licence upgrades for other modulations with just one clicking through on-line service of Lumantek. Also, you can download the latest T-PUMP software freely from our web based ‘Download Center’. (http://www.lumantek.com)

Remote operation with Remote Desktop or IP Network

The VENTUS F1 can be easily direct operated with a mouse, and a PC monitor through the latest T-PUMP or in a LAN network over UDP/IP. VEMTUS F1 has the same highly convenient graphical user-interface that has already proven it’s mettle in the VENTUS 1.0 USB 2 platform of instrument. 1/4

Specifications

Parameter Conditions Value Frequncy Range 50MHz to 870MHz Frequncy Range 1KHz +10dBm ~ -30dBm / +10dBm ~ -110dBm (optional) / +20dBm ~ -20dBm (optional) RF Signal Output Power 0.1dB step Output Power Accuracy < +-1dB Spectral Purity <–60dBc @ Full Bandwidth Terrestrial DTV DVB-T, DTMB, ISDB-T, ATSC Cable DTV DVB-C, OpenCable CMMB, ATSC-Mobile DTV, DVB-H, T-DMB, ISDB-T 1seg, Modulation Modes Mobile DTV T-DMB Digital Sound Broadcsting DAB/DAB+ Multiplxer CMMB Multiplxer, ATSC Mobile Multiplxer TS generator ASI OUT Transport stream play AWGN All standard mode 20 M bandwidth TS Recorder ASI IN Transport stream recoding / real time modulation (ATSC, DVB-T/H/C, OpenCable) OS Embedded Window 7 Storage 32GB SSD or extrenal USB Memory USB 2.0 4 port of USB 2.0 VGA 1 Port of VGA Terminal System Platform Ethernet 10/100BaseT, RJ-45 Remote control IP Network Power 90 VAC ~ 240 VAC, 50/60Hz Dimensions 427mm×44mm×450 mm (16.81in×1.73in×17.72 in) Weight < 5kg

LUMANTEK Catalogue No.15 /2011-