BJ081412 Dust Collection “Sewer” Adapters

PVC pipe and fittings available at the local It’s 4” size is a little different than building centre (sewer pipe) is often used dust collection fittings and not so in shop dust collection because of the low easy to connect to until now. cost and ease of use.

4” Hose to 4” PVC Fittings 13053

This fitting is made to fit into the female side of standard PVC fittings.

Put one of these into the fitting and connect the 4” hose that goes to the machine when you end a pipe run with a Y”, “T”, elbow or any other fitting.

Here’s a list of all fittings that can be easily connected:

13005 Dust Cap 4” 13041 Blast Gate 4” Tapered M/F 13042 Blast Gate 4” F/Threaded 13066 Blast Gate F/F 4” 13093 Splicer 4” to 4” and 4” Hose

4” Hose to 4” PVC Pipe 13054

This fitting is made to fit directly into the end of standard PVC pipe.

Put one of these into the fitting and connect the 4” hose that goes to the machine when you end a pipe run with a “Y”, “T”, elbow or any other fitting.

Threaded Adapters SPECIFICATIONS Min Case Your next project Part # Size Material UPC Qty Qty 13053 4” Hose to PVC Fittings ABS/Plastic 885732130535 1 100 just got easier! 13054 4” Hose to PVC Pipe ABS/Plastic 885732130542 1 100 © BlackJack 2014

BlackJack™ Tools, Embro, Ontario, Canada N0J 1J0 www.BlackJackCompany.com BJ081412 Dust Collection Tapered Adapters

Tapered adapters are designed to CONNECT and DISCONNECT from your equipment quickly.

The threaded end of the adapter fits tightly into the 4” x 2-1/2” dust collection hose eliminating the need for hose clamps. 13061 Right hand thread They are easy to thread into the hose if you wet the adapter with soapy water.

The inside of the opposite end of the adapter is tapered and fits perfectly onto the matching taper of the dust gates, universal hoods, hoods, hoods and floor sweeps.

4” 13062 Left hand thread This 4” x 2-1/2” tapered adapter can be easily connected to the following fittings:

13031 Blast Gate Plastic Tapered M/M 4” 13040 Blast Gate 4” M/Threaded 13041 Blast Gate 4” Tapered M/F This 4” tapered adapter 13065 Blast Gate 4” Tapered M/M Clearing can be easily connected 13101 Dust Hood 14” to the following fittings: 13102 Hood 4” Jointer 8-1/4” x 8-1/4” 13103 Hood 4” Jointer 8-1/2” x 10-1/4” 13031 Blast Gate Plastic Tapered M/M 4” 13104 Hood 4” - 6-1/4” 13040 Blast Gate 4” M/Threaded 13111 Floor Sweep 4” - 24” 13041 Blast Gate 4” Tapered M/F 13403 Hood 4” - 4-1/2” x 9-1/2” 13065 Blast Gate 4” Tapered M/M Clearing 13405 Adapter 4” Universal 13101 Dust Hood Table Saw 14” 13408 Hood 4” - 8” x 13-1/2” 13102 Hood 4” Jointer 8-1/4” x 8-1/4” 13063 Adapter 4” to 2-1/4” offset 13103 Hood 4” Jointer 8-1/2” x 10-1/4” 13389 Adapter 4” x 2-1/4” 13104 Hood 4” - 6-1/4” 13391 Adapter 2-1/2” to 2-1/4” 13111 Floor Sweep 4” - 24” 13401 Adapter 2-1/4” to 1-1/2” 13403 Hood 4” - 4-1/2” x 9-1/2” 13402 Adapter 1-1/2” to 2-1/4” 13405 Adapter 4” Universal 13407 Adapter 2-1/4” to 2-1/2” 13408 Hood 4” - 8” x 13-1/2” 13409 Adapter 4” x 2-1/4” and all 4” Hose And all 2-1/2” Hose

Tapered Adapter SPECIFICATIONS (inches) Your next project Part # Size Material UPC Min Qty Case Qty just got easier! 13061 4” x 2-1/2” ABS/Plastic 885732130610 1 150 13062 4” x 4” ABS/Plastic 885732130627 1 150 © BlackJack 2014

BlackJack™ Woodworking Tools, Embro, Ontario, Canada N0J 1J0 www.BlackJackCompany.com BJ081412 Dust Collection Threaded Adapters

2-1/4” - 2-1/2” This handy fitting adapts 2-1/2” hose to shop vacuum size 13407 and can be easily connected to the following fittings: 13025 Vacuum Hose Adapter 2-1/2” 13127 Cyclone Lid for 12” Pail 13061 Adapter Tapered 4” x 2-1/2” 13129 Cyclone Fitting Kit 2-1/2” 13064 Adapter 13361 Universal Port 2-1/2” Angled 13072 Y - 4” x 4” x 2-1/2” 13362 Universal Port 2-1/2” Straight 13075 Nozzle Tapered 2-1/2” 13390 Adapter 4” x 2-1/2” 13076 Nozzle 2-1/2” 3-1/2” x 6” 13406 Adapter Fence 2-1/2” 13090 Splicer 2-1/2” Hose to Hose All 2-1/2” Hose

The smooth end fits directly into a shop vac. We recommend using a 2-1/2” wire hose . Left hand thread.

This hose end adapter threads into our clear PVC hose and the shallow threads work 4” to 3-11/16” perfectly with a wire hose clamp to securely keep it in place even under strong pulling load. 13410 The smooth end of this fitting fits the internal diameter of all straight 4” black fittings which is perfect for coupling directly to large hoods behind lathes or radial or connecting to the internal end of a 4” Y fitting. Here’s a list of all fittings that can be easily connected:

13055 Adapter, Universal 4” 13056 Nozzle 4” Yellow 13068 Y - 5” x 4” x 4” 13071 Y-Fitting 4” 13073 Y - 6” x 4” x 4” 13121 Big Gulp Dust Hood 4” 16” x 13” 13130 Cyclone fitting kit - 4” 13403 Hood 4” 4-1/2” x 9-1/2” 13404 Hood 4” 4” x 10” And all 4” Hose

(not exactly as shown)

Left hand thread.

Threaded Adapters SPECIFICATIONS Min Case Your next project Part # Size Material UPC Qty Qty 13407 2-1/4” to 2-1/2” Polypropylene 885732134076 1 200 just got easier! 13410 4” to 3-11/l6” Polypropylene 885732134106 1 100 © BlackJack 2014

BlackJack™ Woodworking Tools, Embro, Ontario, Canada N0J 1J0 www.BlackJackCompany.com