DOCSLIB.ORG

Isamill™ Uses Horizontal Milling to Secure Better Energy Efficiency

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Isamill™ Uses Horizontal Milling to Secure Better Energy Efficiency IsaMill™ uses horizontal milling to secure better energy effi ciency, product size and availability with a 25% capital-back performance guarantee. IsaMill’s horizontal configuration means it’s completely different from other mills. IsaMill™ gives me an increased recovery that outweighs the cost. I never have to worry about the mill.” – Amandelbult Operation, Anglo American Flowsheet improvements for the real world IsaMill™ at a glance > Real-world success in 130 metalliferous installations across 21 countries since launching in 1994 > World’s only horizontal fine grinding mill, it avoids short-circuits and gives the highest availability > Most efficient fine grinding mill in the world > Strongest performance guarantee in the world > Most consistent product size > Delivers better results to downstream flotation and leaching For more: [email protected] Tel +61 7 3833 8500 IsaMill™ 1 IsaMill™ is the most effi cient and reliable grinding mill available and with 130 metalliferous installations in 21 countries it has a proven record in the real world. The IsaMill™ reduces the energy, media and capital costs of grinding. It’s incredibly effi cient and intense. It focuses only on the particles that need grinding. The IsaMill™ produces greater power vertical mill. It’s easy to operate and it The IsaMill™ is currently available in the intensity than ball or tower mills. maximises availability. following models, named for their net grinding volume: Today’s IsaMill™ is also light. A modest The IsaMill™ gives an accurate and volume of concrete and structural steel rapid scale up, so it’s predictable • M1000 (355–500kW)* are used, and the entire unit sits on a and reliable. • M3000 (800kW) one-storey platform. This means it’s Operating and maintaining the IsaMill™ about a third the height and weight of • M5000 (1120–1500kW) is safe, simple and reliable. It’s quick to similar grinding mills available. install, fl exible in operation and easy • M10000 (3000kW) It produces the most consistent and to maintain. • M15000 (3700kW) ‘sharp’ particle size distribution in a The IsaMill™ is widely used in base simple open circuit confi guration. • M50000 (8000kW). metals (copper, lead, zinc and nickel), IsaMill™ is the world’s only horizontal PGM, iron ore, industrial applications fi ne grinding mill. The horizontal slurry and gold processing plants and is the fl ow means low cost ceramic media best choice for regrinding concentrates, can be used without the concerns of a fi ne or ultrafi ne grinding and mainstream grinding. * Smaller models are available on request 2 Flowsheet improvements for the real world How IsaMill™ grinds more effi ciently and delivers greater value 1. More accurate scale-up 3. Finer grinding and 5. Easier operation and better media maintenance The IsaMill™ is proven in the real world. Lab and pilot results are scaled to Slurry travels in a ‘plug’ fl ow pattern A Liquid Resistance Starter for the commercial size with 100% accuracy. through the eight rotating grinding IsaMill™ motor means it can be started We test rigorously for specifi c energy, discs within the mill. Media recirculates under load, so no time is lost in draining particle size and optimise the media between the discs, colliding with the the mill. size for accurate scale up so that every particles in the feed, causing breakage. Maintenance is easy. The entire grinding plant we install always meets design. The media is ceramic and avoids the chamber is quick to access. Slurry is When you buy an IsaMill™, the scope passivation of particles common with fl ushed from the IsaMill™ and the includes process and engineering metallic media, improving the product media is dumped through a scuttle design, supply and commissioning by for fl otation and leaching. valve into a hopper below. The IsaMill™ experts with real-world experience, for shell is then pushed back along rails The IsaMill™ delivers an even blend easy installation by a local contractor using hydraulic rams, giving you quick of attrition and abrasion of particles or EPCM. access to all the wear parts, all in under throughout the mill. At the discharge half an hour. end, slurry and media reach a patented 2. Easier installation product separator where media and Even a complete shutdown for and operation over-sized particles are retained in the inspection and replacement of wear grinding zone, while particles at the parts including the liner itself takes less Because the IsaMill™ delivers high correct grind size exit the IsaMill™. than eight hours. intensity grinding, it only requires a small footprint. 4. Most consistent product The horizontal confi guration results in a low height, unlike vertical grinding The IsaMill™ gives a sharper product mills. Smaller cranes are required to size distribution. Other mills with just install and maintain the IsaMill™. one grinding stage require closed circuit cyclones and high recirculating The IsaMill™ takes about a tenth the loads and still don’t produce product grinding volume of an equivalent ball size distributions as tight and steep as or tower mill. There are no external the IsaMill™. screens or cyclones required because the IsaMill™ internally classifi es the The IsaMill™ also produces clean, feed and delivers a consistent product. fresh mineral surfaces that improve downstream performance from fl otation and leaching. IsaMill™ 3 How we help you get more from your IsaMill™ Commitment in a partnership A unique performance guarantee The IsaMill™ was developed and proven in real world With unequalled and proven performance in the real world, Glencore mining applications, so we’ve built up a suite of services Technology provide the most confi dent performance guarantee in that underpin our Technology Partnership concept. the world to minimise our customers risks: As a Partner: IsaMill™ uses horizontal milling to secure better energy effi ciency, product size and availability with a 25% capital-back • You will have access to training opportunities at real performance guarantee. client sites. The commitment and agreement is complete: • You will always have access to our most experienced technology experts around the world. • Your needs for a given energy draw or a given product distribution will be secured by the performance guarantee. • Your team will have opportunities to learn from other users. • We will work with you to ensure your needs for feed variability, operations and maintenance will be built in. • You will have access to a comprehensive spare parts supply. • Training and support will be included. • You’ll have access to maintenance and advisory services. If performance is not achieved then the 25% guarantee will apply, which is far greater than the prevailing industry • You will secure an ongoing technical standard of 5–10%. relationship with us. 4 Flowsheet improvements for the real world How others have gained from IsaMill™ George Fisher’s regrind Prominent Hill uses IsaMill™ 130 metalliferous circuit boosts recovery and to boost downstream installations in 21 Countries reduces reagents performance by December 2017 When the George Fisher project OzMinerals’ Prominent Hill copper- Clients and Projects include: needed fi ne grinding to a P80 of gold concentrator began commercial • Woodlawn (Heron Resources) seven microns in their zinc retreatment production in 2009. They needed circuit, they knew the IsaMill™ liberated fl uorine minerals to be • Aktogay (KAZKMYS) would be ideal. rejected in the cleaner fl otation circuit • Gidgi (KCGM) to produce a commercial quality Every one-micron size reduction in the copper-gold concentrate. • Eleonore (GoldCorp) zinc retreatment circuit below a P80 of 10 microns improves the overall plant A 3 MW M10000 IsaMill™ operating with • Constancia (Hudbay) zinc recovery by 1%, and the IsaMill™ 3.5mm ceramic media was installed to • Dugald River (MMG) was modelled to achieve this. liberate the fl uorine bearing gangue minerals from the rougher concentrate. • Mortimer (Anglo Platinum) Eight 1.1 MW IsaMill™ installations were introduced, two to regrind lead cleaner The IsaMill™ regrind circuit successfully • Mt Milligan (Thompson Creek Metals) feed and six to regrind intermediate produced a leaner circuit feed P80 of • Ernest Henry Mining (Xstrata Copper) zinc fl otation streams. The existing 20–25μm ensuring adequate liberation. concentrator was modifi ed to suit the What’s more, the inert grinding • Penasquito (Minera Penasquito) new ore type. environment in the IsaMill™ prevented contamination of the mineral surfaces The results were good and better – the and gave OzMinerals the optimum recovery improvement was expected fl otation performance from the fi rst day due to better liberation, but the of commissioning. operation also saw a signifi cant drop in reagents and circulating loads. Fine minerals are expected to consume more reagent due to their higher surface area, but improved liberation dropped circulating loads. Clean fresh surfaces from inert attrition increased fl otation rates and selectivity, and these signifi cantly reduced the need for collector and depressant. IsaMill™ 5 isamill.com glencoretechnology.com @GlencoreTech facebook.com/Expertise.in.Technology CONTACT Glencore Technology Pty Limited ABN 65 118 727 870 Level 10, 160 Ann St Brisbane QLD 4000 Australia T. +61 7 3833 8500 F. +61 7 3833 8555 E. [email protected] South America · T. +562 2342 9000 Africa · T. +27 82 441 7482 Russia & CIS · T. +7 985 928 44 87 D10_GLT3066A _11/19.
Load more

Recommended publications
  • From Base Metals and Back – Isamills and Their Advantages in African Base Metal Operations
    The Southern African Institute of Mining and Metallurgy Base Metals Conference 2013 H. de Waal, K. Barns, and J. Monama From base metals and back – IsaMills and their advantages in African base metal operations H. de Waal, K. Barns, and J. Monama Xstrata IsaMill™ technology was developed from Netzsch Feinmahltechnik GmbH stirred milling technology in the early 1990s to bring about a step change in grinding efficiency that was required to make Xstrata’s fine-grained lead/zinc orebodies economic to process. From small-scale machines suited to ultrafine grinding, the IsaMill™ has developed into technology that is able to treat much larger tonnages, in coarser applications, while still achieving high energy efficiency, suited for coarser more standard regrind and mainstream grinding applications. The unique design of the IsaMillTM, combining high power intensity and effective internal classification, achieves high energy efficiency and tight product distribution which can be effectively scaled from laboratory scale to full-sized models. The use of fine ceramic media also leads to significant benefits in downstream flotation and leaching operations. These benefits are key drivers for the adoption of the technology into processing a diverse range of minerals worldwide, and offer major opportunities for power reduction and improved metallurgy for the African base metal operations. Keywords: IsaMill, regrind, energy efficiency, inert grinding. Introduction The development of the IsaMillTM, by MIM (now GlencoreXstrata) and Netzsch Feinmahltechnik GmbH, was initiated to enable the development of the fine-grained ore deposits at Mt Isa and McArthur River in Northern Australia. To liberate the valuable minerals and so produce a saleable concentrate this ultrafine-grained ore needed to be ground to a P80 of 7 μm.
    [Show full text]
  • Some Problems and Potentials of the Study of Cupellation
    Some problems and potentials of the study of cupellation remains: the case of post-medieval Montbéliard, France Marcos Martinon-Torres, Nicolas Thomas, Thilo Rehren, Aude Mongiatti To cite this version: Marcos Martinon-Torres, Nicolas Thomas, Thilo Rehren, Aude Mongiatti. Some problems and po- tentials of the study of cupellation remains: the case of post-medieval Montbéliard, France. Archeo- sciences, revue d’Archéométrie, G.M.P.C.A./Presses universitaires de Rennes, 2008, pp.59-70. halshs- 00599974 HAL Id: halshs-00599974 https://halshs.archives-ouvertes.fr/halshs-00599974 Submitted on 19 Jun 2011 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Some problems and potentials of the study of cupellation remains: the case of early modern Montbéliard, France Problèmes et perspectives à partir de l’étude des vestiges archéologiques issus de la coupellation : l’exemple du site de Montbéliard (France) Marcos Martinón-Torres*, Nicolas Thomas**, Thilo Rehren*, and Aude Mongiatti* Abstract: Bone-ash cupels are increasingly identified in medieval and later archaeological contexts related to the refining of noble metals in alchemy, assaying, jewellery or coin minting. These small finds may provide information on metal refining activities, the technical knowledge of different craftspeople, and the versatility of laboratory practices, which often differed from the standard protocols recorded in metallurgical treatises.
    [Show full text]
  • S Ndlovu (PDF)
    Extraction of Gold Then, Now and the Future Prof Sehliselo Ndlovu DST/NRF SARChI: Hydrometallurgy and Sustainable Development University of the Witwatersrand, Johannesburg Building a Robust Minerals Industry 3 – 4 July 2017, Cresta Lodge, Harare University of the Witwatersrand Johannesburg Founded Oct. 1896: School of Mines Approx. 37 000 Students 5 Faculties, 33 Schools, 3610 Courses >160 000 Degrees Conferred since 1922 55% Female Students 10 National Centres of Excellence Home to the Bidvest Football Club( Current PSL league Champions) Evolution in Gold Processing Past Technologies • Amalgamation • Panning Current Technologies • Cyanide leaching • Processing of Emerging and Future refractory ores Technologies • Bio-oxidation • Ionic liquids • Alternative leaching • Ultrasonic leaching reagents • Corn starch?? Past Technologies Used in Ancient Times History of gold extends back at least 6,000 years. Egypt and Mesopotamia around 4000 BC. Gravity Separation: Gold Panning Gold concentrated by washing lighter river sands with water Leaves dense gold particles Alternative- wash gold-bearing sand and gravel over a woollen fleece Traps heavier gold dust that would sink into the wool fibres. Advantages • Simplicity Disadvantages • Labour intensive Gravity Separation: Sluicing • Water is channelled to flow through a sluice-box. • Sluice-box is essentially a man-made channel with riffles (barriers) at the bottom. • Riffles create dead-zones in the water current which allows gold to drop out of suspension. Sluicing and panning results in the direct recovery of small gold nuggets and flakes. Gold Parting: Salt Cementation Process • Invented to remove Ag from Au-Ag mixtures around 6th century BC. Mix: argentiferous gold foil, common salt, brick dust or burnt clay and urine in a sealed container.
    [Show full text]
  • Principles of Extractive Metallurgy Lectures Note
    PRINCIPLES OF EXTRACTIVE METALLURGY B.TECH, 3RD SEMESTER LECTURES NOTE BY SAGAR NAYAK DR. KALI CHARAN SABAT DEPARTMENT OF METALLURGICAL AND MATERIALS ENGINEERING PARALA MAHARAJA ENGINEERING COLLEGE, BERHAMPUR DISCLAIMER This document does not claim any originality and cannot be used as a substitute for prescribed textbooks. The information presented here is merely a collection by the author for their respective teaching assignments as an additional tool for the teaching-learning process. Various sources as mentioned at the reference of the document as well as freely available material from internet were consulted for preparing this document. The ownership of the information lies with the respective author or institutions. Further, this document is not intended to be used for commercial purpose and the faculty is not accountable for any issues, legal or otherwise, arising out of use of this document. The committee faculty members make no representations or warranties with respect to the accuracy or completeness of the contents of this document and specifically disclaim any implied warranties of merchantability or fitness for a particular purpose. BPUT SYLLABUS PRINCIPLES OF EXTRACTIVE METALLURGY (3-1-0) MODULE I (14 HOURS) Unit processes in Pyro metallurgy: Calcination and roasting, sintering, smelting, converting, reduction, smelting-reduction, Metallothermic and hydrogen reduction; distillation and other physical and chemical refining methods: Fire refining, Zone refining, Liquation and Cupellation. Small problems related to pyro metallurgy. MODULE II (14 HOURS) Unit processes in Hydrometallurgy: Leaching practice: In situ leaching, Dump and heap leaching, Percolation leaching, Agitation leaching, Purification of leach liquor, Kinetics of Leaching; Bio- leaching: Recovery of metals from Leach liquor by Solvent Extraction, Ion exchange , Precipitation and Cementation process.
    [Show full text]
  • Table of Contents
    Table of Contents Preface ........................................... xi Chapter 1. Physical Extraction Operations .................... 1 1.1. Solid-solid and solid-fluid separation operations .............. 1 1.1.1. Flotation ................................... 1 1.1.2. Settling under gravity ........................... 3 1.1.3. Centrifugation ................................ 3 1.1.4. Filtration ................................... 4 1.2. Separation operations of the components of a fluid phase ........ 5 1.2.1. Condensation ................................ 5 1.2.2. Vacuum distillation ............................. 5 1.2.3. Liquation ................................... 6 1.2.4. Distillation .................................. 8 1.2.5. Extractive distillation ........................... 11 1.3. Bibliography ................................... 12 Chapter 2. Hydrometallurgical Operations .................... 15 2.1. Leaching and precipitation operations .................... 15 2.1.1. Leaching and precipitation reactors ................... 15 2.1.2. Continuous stirred tank reactor (CSTR) ................ 18 2.1.3. Models of leaching and precipitation operations ........... 20 2.1.4. Particle-size distribution (PSD) functions ............... 21 2.2. Reactor models based on particle residence time distribution functions ........................................ 24 2.2.1. Performance equations for a single CSTR ............... 24 2.2.2. Performance equations for multistage CSTRs ............. 28 2.3. Reactor models based on the population balance
    [Show full text]
  • Recovery of Gold and Iron from Cyanide Tailings with a Combined Direct Reduction Roasting and Leaching Process
    metals Article Recovery of Gold and Iron from Cyanide Tailings with a Combined Direct Reduction Roasting and Leaching Process Pingfeng Fu 1,2,* ID , Zhenyu Li 1, Jie Feng 1 and Zhenzhong Bian 1 1 School of Civil and Resources Engineering, University of Science and Technology Beijing, Beijing 100083, China; [email protected] (Z.L.); [email protected] (J.F.); [email protected] (Z.B.) 2 Key Laboratory of High-Efficient Mining and Safety of Metal Mines, Ministry of Education, Beijing 100083, China * Correspondence: [email protected]; Tel.: +86-10-6233-2902 Received: 25 June 2018; Accepted: 19 July 2018; Published: 21 July 2018 Abstract: Cyanide tailings are the hazardous waste discharged after gold cyanidation leaching. The recovery of gold and iron from cyanide tailings was investigated with a combined direct reduction roasting and leaching process. The effects of reduction temperature, coal dosage and CaO dosage on gold enrichment into Au-Fe alloy (FexAu1−x) were studied in direct reduction roasting. Gold containing iron powders, i.e., Au-Fe alloy, had the gold grade of 8.23 g/t with a recovery of 97.46%. After separating gold and iron in iron powders with sulfuric acid leaching, ferrous sulfate in the leachate was crystallized to prepare FeSO4·7H2O with a yield of 222.42% to cyanide tailings. Gold enriched in acid-leaching residue with gold grade of 216.58 g/t was extracted into pregnant solution. The total gold recovery of the whole process reached as high as 94.23%. The tailings generated in the magnetic separation of roasted products, with a yield of 51.33% to cyanide tailings, had no toxic cyanide any more.
    [Show full text]
  • Metal Leaching in Mine-Waste Materials and Two Schemes for Classification of Potential Environmental Effects of Mine-Waste Piles
    Metal Leaching in Mine-Waste Materials and Two Schemes for Classification of Potential Environmental Effects of Mine-Waste Piles By David L. Fey and George A. Desborough Chapter D4 of Integrated Investigations of Environmental Effects of Historical Mining in the Basin and Boulder Mining Districts, Boulder River Watershed, Jefferson County, Montana Edited by David A. Nimick, Stanley E. Church, and Susan E. Finger Professional Paper 1652–D4 U.S. Department of the Interior U.S. Geological Survey ffrontChD4new.inddrontChD4new.indd ccxxxviixxxvii 33/14/2005/14/2005 66:07:29:07:29 PPMM Contents Abstract ...................................................................................................................................................... 139 Introduction ............................................................................................................................................... 139 Purpose and Scope ......................................................................................................................... 140 Sample Collection and Preparation ....................................................................................................... 140 Bulk Surface Samples ..................................................................................................................... 140 Two-Inch Diameter Vertical Core .................................................................................................. 140 Location of Mine-Waste Sites ...............................................................................................................
    [Show full text]
  • Metallurgical Leaching
    METALLURGICAL LEACHING Metallurgical leaching is a mining technology that involves the treatment of mineralmaterials, mainly oxidized containing desirable metals and which are reduced in size to be subjected to a wet process with acidic or basic solutions to dissolve soluble elements and concentrate in an enriched solution, so it is considered a “hydrometallurgical” process. This process allows to work “mineral deposits” ranked as low concentration provided that the mining operation occurs to a large scale to reduce costs per ton of mineral extraction and ensure profitability in the process. Compared to pyrometallurgical operations, leaching is a much simpler and much less harmful because gaseous pollution never occurs, and because its energy consumption is very low, mostly depending on gravity’s action and pumping solutions to the heap. The control points in the leaching process are to monitor the potential of acid generation of waste rocks to avoid toxicity, the efficiency of the operation and the temperature of the reactions are essential to ensure the profitability of the chemical operation of the reactants. There are various kinds of Metallurgical leaching processes. To choose the most appropriate will generally depend on the type of “reagents” used for the operation, which are selected according to the type of mineral or material being processed and that will generally can be identified as “oxides “or” sulfide” In the case of the leaching of a zinc oxide, a simple leaching reaction can be illustrated in the following formula: ZnO (zinc oxide) + H2SO4 (sulfuric acid) -> ZnSO4 (soluble zinc sulphate) + H20 (water) In the case of aluminum oxide, the leaching can occur with “alkali” solutions, for example, under the following formula: Al2O2 (1 molecule of aluminum oxide) + 3H2O (3 molecules of water) + 2NaOH (2 molecules hydroxide sodium) -> 2NaAl (OH) 4 (hydrated sodium aluminate) The leaching of precious metals like gold and silver can be done very easily with cyanide or ozone under ambient conditions.
    [Show full text]
  • Copper Recovery Using Leach/Solvent Extraction/Electrowinning Technology
    Copper recovery using leach/solvent extraction/electrowinning technology: Forty years of innovation, 2.2 million tonnes of copper annually by G.A. Kordosky* small scale in analytical chemistry3 and on a large scale for the recovery of uranium from Synopsis sulphuric acid leach solutions4. Generally Mills had already developed and commercialized The concept of selectively extracting copper from a low-grade dump Alamine® 336 as an SX reagent for the leach solution followed by stripping the copper into an acid recovery of uranium from sulphuric acid leach solution from which electrowon copper cathodes could be produced liquors5 and believed that a similar technology occurred to the Minerals Group of General Mills in the early 1960s. for copper recovery would be welcome. This simple, elegant idea has resulted in a technology by which However, an extensive market survey showed about 2.2 million tonnes of high quality copper cathode was produced in year 2000. The growth of this technology is traced over that the industry reception for copper recovery time with a discussion of the key plants, the key people and the by L/SX/EW technology was almost hostile. important advances in leaching, plant design, reagents and The R&D director of a large copper producer electrowinning that have contributed to the growth of this predicted at an AIME annual meeting that technology. Some thoughts on potential further advances in the there would never be a pound of copper technology are also given. recovered using solvent extraction and his comment prompted
    [Show full text]
  • Pretreatment of Copper Ore Prior to Heap Leaching Includes Crushing and Agglomeration Processes Which Were Studied in This Thesis Research
    PRETREATMENT OF COPPER ORE PRIOR TO HEAP LEACHING by Phanindra Kodali A thesis submitted to the faculty of The University of Utah in partial fulfillment of the requirements for the degree of Master of Science Department of Metallurgical Engineering The University of Utah August 2010 Copyright Phanindra Kodali 2010 All Rights Reserved The University of Utah Graduate School STATEMENT OF THESIS APPROVAL The thesis of Phanindra Kodali has been approved by the following supervisory committee members: Jan D. Miller , Chair 11113/2009 Chen-Luh Lin , Member 11113/2009 Xuming Wang , Member 11113/2009 Michael S. Moats . Member 11113/2009 and by Jan D. Miller , Chair of the Department of Metallurgical Engineering and by Charles A. Wight, Dean of The Graduate School. ABSTRACT Pretreatment of copper ore prior to heap leaching includes crushing and agglomeration processes which were studied in this thesis research. Crushing is a high energy consuming process. In mining operations generally jaw and gyratory crushers are used for primary crushing and cone crushers are used for secondary crushing. During the past couple of decades High Pressure Grinding Roll (HPGR) crushers are being considered by mining companies due to lower energy consumption. In the present research copper ores (copper oxide and copper sulfide ores) were crushed by a jaw crusher and by HPGR and the products evaluated for particle damage, as well as by column leaching to determine the rate and extent of copper recovery. X-ray computed tomography analysis and laboratory column leaching experiments on copper oxide samples revealed that products from HPGR crushing have more particle damage and higher copper recoveries when compared with products from jaw crusher crushing.
    [Show full text]
  • Copper Hydrometallurgy and Extraction from Chloride Media
    COPPER HYDROMETALLURGY AND EXTRACTION FROM CHLORIDE MEDIA JAN SZYMANOWSKI SK96K0015 Institute of Chemical Technology and Engineering, Poznan University of Technology, PI. Sktodowskiej-Curie 2, 60-965 Poznan, Poland The development of copper hydrometallurgy is presented and various processes proposed for copper recovery from sulphide concentrates are discussed. Leaching, extraction and stripping are considered, including reagents and processes. The extraction of copper from chloride solutions is discussed. Various extractants are presented and their use for copper transfer from chloride solutions to the organic phase and back to chloride and to sulphate solutions is discussed. Hydrometallurgy is used for copper recovery for more than 300 years. Already in 1670 the mine waters were treated with iron to precipitate copper. However, two hundred years were needed to process oxide ores by vat leaching and copper cementation with iron. The development most important to copper hydrometallurgy, both with respect to the growing number of its applications and for its future potential, has been solvent extraction (SX). 1 It started in 1968 in a small scale and in about 1974 in a large scale of about 100 000 tones/year copper. These operations have served as a stimulus for at least of 30 copper plants, recovering nearly 800 000 tonnes/year of copper with the application continuing to increase. New processes are now developed to recover copper from sulphide ores and concentrates, including CLEAR Process and CUPREX Process. Chloride-based processes play a key role in the metallurgical and chemical industries. 2 One of the most important factors responsible for the significant role of chloro-based processes is the ease of chlorine recycling.
    [Show full text]
  • Accelerating Copper Leaching from Sulfide Ores in Acid-Nitrate
    minerals Article Accelerating Copper Leaching from Sulfide Ores in Acid-Nitrate-Chloride Media Using Agglomeration and Curing as Pretreatment Pía C. Hernández 1,* , Junior Dupont 1, Osvaldo O. Herreros 2, Yecid P. Jimenez 1 and Cynthia M. Torres 3 1 Departamento de Ingeniería Química y Procesos de Minerales, Universidad de Antofagasta, Avda. Angamos 601, 1240000 Antofagasta, Chile; [email protected] (J.D.); [email protected] (Y.P.J.) 2 Departamento de Ingeniería en Minas, Universidad de Antofagasta, Avda. Angamos 601, 1240000 Antofagasta, Chile; [email protected] 3 Departamento de Ingeniería Metalúrgica y Minas, Universidad Católica del Norte, Avda. Angamos 0610, 1240000 Antofagasta, Chile; [email protected] * Correspondence: [email protected]; Tel.: +56-55-2637313 Received: 29 March 2019; Accepted: 24 April 2019; Published: 25 April 2019 Abstract: This work investigates the effect of an agglomeration and curing pretreatment on leaching of a copper sulfide ore, mainly chalcopyrite, using mini-columns in acid-nitrate-chloride media. Ten pretreatment tests were conducted to evaluate different variables, namely the addition of nitrate as NaNO3 (11.7 and 23.3 kg/ton), chloride as NaCl (2.1 and 19.8 kg/ton), curing time (20 and 30 days) and repose temperature (25 and 45 ◦C). The optimum copper extraction of 58.6% was achieved with the addition of 23.3 kg of NaNO3/ton, 19.8 kg of NaCl/ton, and after 30 days of curing at 45 ◦C. Under these pretreatment conditions, three samples of ore were leached in mini-columns. The studied parameters were temperature (25 and 45 ◦C) and chloride concentration (20 and 40 g/L).
    [Show full text]