Digital Clock Radio User Manual

DIGITAL CLOCK RADIO 0.6” LED DISPLAY

USER MANUAL

Thank you for purchasing a Buddee Digital Clock Radio. DEVICE FUNCTIONS For optimum performance and safety, read these instructions Turn unit ON/OFF, switch between AM/FM modes carefully before connecting, operating or adjusting this product. Set radio to turn off after 90/80/70/60/50/40/30/20/10 Refer to this manual for future reference. minutes. Press to select time. Once set, press to cancel. INTRODUCTION Snooze alarm. Alarm will start again after 9 minutes. This compact AM/FM radio fits easily on your bedside table Increase volume / Set alarm 1 and allows you to wake up how and when you like. With dual alarms, AM/FM radio, sleep and snooze functions, and up to Decrease volume / Set alarm 2 20 radio presets, you have everything you need to get going Set/select radio preset / Set time in the morning. Tune radio / Set hour FEATURES Tune radio / Set minutes • Dual alarms Alarm 1: Buzzer • AM/FM radio • Sleep and snooze functions Alarm 1: Radio • 20 radio presets Alarm 2: Buzzer • Radio or buzzer alarms Alarm 2: Radio

PACKAGE CONTENTS TURNING THE UNIT ON/OFF Before attempting to use this unit, please check the In standby mode, press ON/OFF to turn the unit on. packaging and make sure the following items are Hold ON/OFF to turn off. contained in the shipping carton:

• Main unit (Digital clock radio) SETTING THE TIME • Power cable 1. In standby mode, hold the SET button until the display • User manual flashes. Set the time with the HR and MIN buttons. 2. When the time is correct, press SET to confirm. Note: In time setting mode, if no button is pressed for 4 seconds the current time setting will be confirmed.

POWER SUPPLY Requires 2 x 1.5V AAA batteries for back up (not included). For optimal performance, alkaline batteries are recommended. Batteries must be replaced every 6 months. 1. Insert power cord plug into a standard wall outlet. 2. Install batteries in battery compartment. Ensure the AAA batteries are installed with the correct polarity (- to -, + to +). Batteries should be replaced when the volume decreases or sound is distorted. Made in China CAUTION: Incorrect battery installation can result in explosion. Only replace with the correct battery type (AAA). © Buddee Gear 2016. All rights reserved. All trademarks are registered trademarks of respective manufacturers listed.

LISTENING TO THE RADIO SELECTING FREQUENCY When the unit is ON, press the ON/OFF button to turn on the radio and switch between AM and FM. Manual search: 1. Adjust the volume using the V+ and V- buttons. 2. Set radio frequency using the T+ and T- buttons. Automatic search: Press and hold T+ or T- to automatically search radio stations with strong signals. TO ENHANCE RADIO RECEPTION FM: Extend the antenna AM: Rotate the unit horizontally for optimum reception If reception is still weak, try moving the radio to another location. TURNING THE UNIT ON/OFF In standby mode, press ON/OFF to turn the unit on. Hold ON/OFF to turn off.

SETTING THE TIME 1. In standby mode, hold the SET button until the display flashes. Set the time with the HR and MIN buttons. 2. When the time is correct, press SET to confirm. Note: In time setting mode, if no button is pressed for 4 seconds the current time setting will be confirmed.

LISTENING TO THE RADIO CAUTION SELECTING FREQUENCY No not open attempt to open the unit yourself, this could result When the unit is ON, press the ON/OFF button to turn on the in electrical shock. If the radio requires servicing, please refer radio and switch between AM and FM. to your place of purchase. Manual search: 1. Adjust the volume using the V+ and V- buttons. IMPORTANT SAFETY INFORMATION 2. Set radio frequency using the T+ and T- buttons. Do not expose the unit to extreme hot or cold temperatures. Automatic search: Ensure that there is a minimum of 5 cm clear around the unit Press and hold T+ or T- to automatically search radio stations for sufficient ventilation. with strong signals. Ensure that the ventilation openings are not obstructed. TO ENHANCE RADIO RECEPTION FM: Extend the antenna DO NOT place sources of naked flame e.g. lit candles, AM: Rotate the unit horizontally for optimum reception on the unit. If reception is still weak, try moving the radio to DO NOT expose the unit to water. another location. DO NOT place objects filled with water e.g. glasses or vases, on the unit. DO NOT dispose of the batteries in fire. Ensure that you follow RADIO PRESETS the correct regulations for battery disposal. This unit can store up to 10 FM and 10 AM station presets. DO NOT expose the batteries to excessive heat e.g. sunlight, Set presets: fire or other heat sources. 1. Select a radio station. 2. Press and hold the M+ button until “P 01” is displayed. The power plug is use to disconnect the unit from power and 3. Press M+ again to save the preset. should be easily accessible. To be completely disconnected 4. Repeat steps 1-3 to store more presets. from power, the plug should be disconnected completely. Listen to presets: Under the influence of fast transient and/or electrostatic electric Press the M+ button. “P 01” will be displayed on screen. phenomenon the unit may malfunction and must be reset by Repeatedly press M+ to select the desired preset. turning off and on again.

SETTING THE ALARM AND ALARM MODE DISPOSAL 1. In standby mode, press AL 1 to set alarm mode (buzzer or Electrical goods should not be disposed of with household radio). The corresponding indicator will light up and the display waste. Check local regulations for disposal of electrical goods will blink. and to find your nearest recycling facility. 2. Set the desired time using the HR and MIN buttons. 3. Press AL 1 to save. TECHNICAL SPECIFICATIONS Repeat steps 1 - 3 using the AL 2 button for alarm 2. Power supply: AC 220-240V~50Hz 5W Battery backup: 3V, 2 x 1.5V AAA Frequency: FM 87.5-108MHz STOPPING THE ALARM AM 522-1620kHz SNOOZE Dimensions:116(L) x 92(W) x 45(H) mm Press SNOOZE. The alarm will snooze for 9 minutes. STOP ALARM Press OFF or AL 1/2. The alarm will turn off and sound again at the same time the next day. CANCEL ALARM In standby mode, repeatedly press AL 1/2 to cancel the alarm permanently. The alarm indicator light will turn off.