Installing OS3.1,OS3.9 Then CWB3.9

On Winuae Stuff needed for this

Winuae (http://www.winuae.net/) Cwb 3.9 (http://classicwb.abime.net/classicweb/os39.htm) OS3.1 adfs Amiga OS 3.9 cd All below need to be copied to C:\Program Files\WinUAE\Amiga Programs Boing bag 1 and 2 (http://os.amigaworld.de/index.php?lang=en&page=12) Installer file on the cd (amigaos3.9\OS3.9-Install\C) The following needs to be extracted with winrar or similar AmiCDROM-1.15 (http://aminet.net/package/disk/cdrom/AmiCDROM-1.15) I am using the latest version Setup follows for fastest machine possible Cpu for fastest possible for this guide Aga chipset 3.1 rom Ram setup For faster screen refresh Change to 16mb rtg memory And notice the uaescsi.device ticked Display setup for basic setup Startup floppy setup I used 3.1 setup adf disks Notice the floppy emulation speed slider You need to make your own or have them on cd Hardfile setup I used 500 mb then click on the create button and a popup follows to save And save where you are going to put your system Needed programs setup I added the folder where i copied the extra files

Once done click on the ok button to start up Format hard drive So click on the DH0:NDOS icon and select icons, format disk from the top menu Format hard drive Name the DH0 to system and click on quick format Format hard drive Click format Format hard drive Click format Ready for install Now lets install this Wb 3.1 install So click on the install 3.1 floppy, then the install folder, then the english install icon (i used english for my install) 3.1 install

Click on proceed 3.1 install Click on install release 3.1 3.1 install Click on proceed with install 3.1 install Click english then on proceed 3.1 install Click on proceed unless you have a printer select the box you have 3.1 install Click on british keymap then proceed 3.1 install When it asks for the next disks press f12 and goto floppy drives 3.1 install Then click on the disk it asks for, then ok, the disk will automatically load 3.1 install This will copy the files needed 3.1 install It will ask for the other setup disks so do the same for all disks 3.1 install Now 3.1 is set up press proceed Now press f12 and eject the floppy 3.1 disk Then press the reset button in winuae AmiCDROM-1.15 install Now click on the amiga program files folder you setup And click on AmiCDROM-1.15 folder, Then click on the install icon It will ask for the installer program so click cancel Installer copying Go to workbench bar at the top and click on execute command Installer copying Type in cli then click ok Installer copying Type copy dh1:installer dh0:c then press enter This will copy the installer file to the system c folder AmiCDROM-1.15 install Now click on install icon again AmiCDROM-1.15 install Now click on proceed AmiCDROM-1.15 install Now click uaescsi.device then on proceed AmiCDROM-1.15 install Now click unit 0 then on proceed AmiCDROM-1.15 install Now click bottom option then on proceed AmiCDROM-1.15 install Now click top option then on proceed AmiCDROM-1.15 install Now click bottom option then on proceed AmiCDROM-1.15 install Now change to 1024 then on proceed AmiCDROM-1.15 install Now change to 1024 then on proceed AmiCDROM-1.15 install Now leave as is then on proceed AmiCDROM-1.15 install Then it will ask for work drive just click cancel Then select the system drive tools folder then click proceed AmiCDROM-1.15 install Click proceed AmiCDROM-1.15 install I clicked no here AmiCDROM-1.15 install I had CD0 and click proceed AmiCDROM-1.15 install I clicked on auto-mount AmiCDROM-1.15 install Now click proceed AmiCDROM-1.15 install Now click proceed again OS3.9 install Press f12 Insert your OS3.9 cd into you cdrom drive Then select your drive here (mine is e Then press the reset button on winuae OS3.9 install Hello 3.9 cd OS3.9 install Click the cd icon Then on the OS3.9 installation icon OS3.9 install Click on create an emergency disk Then press f12 on keyboard OS3.9 install Select floppy drives To make a virtual floppy disk Look at bottom of floppy menu and enter emergency in the box Then click create standard disk OS3.9 install It will then ask for you to save the emergency floppy Save it with your 3.1 install disks named 3.9emergency OS3.9 install Then load the emergency disk to df0: Then press ok OS3.9 install Then press proceed OS3.9 install Then select df0 and press proceed OS3.9 install Then press proceed It will then produce the emergency boot disk OS3.9 install Then press proceed And press f12 to winuae config and then press the reset button on winuae OS3.9 install Here is the emergency boot I changed the workbench prefs for 256 colours to make this clearer for the guide OS3.9 install Open the amiga OS3.9 cd then the os-version3.9 folder Click on os3.9-installation icon OS3.9 install Then select third option full install and click proceed OS3.9 install Click proceed OS3.9 install Click accept OS3.9 install Click proceed OS3.9 install Select the dh0:system drive Then click proceed OS3.9 install Select english Then click proceed OS3.9 install Select printer if you have one Then click proceed OS3.9 install Select british Then click proceed OS3.9 install I clicked yes Then it will install 3.9 OS3.9 install I clicked go on without as we have installed a cd filesystem OS3.9 install Click proceed and it will auto reboot OS3.9 install When rebooted press f12 to open winuae config Then eject emergency floppy Then press the reset button on winuae OS3.9 Welcome to OS3.9 OS3.9 Welcome to OS3.9 The folders i arranged myself for viewing OS3.9 boing bag 1 install Open on the amiga programs select it and then select window, show and show all files from the top bar OS3.9 boing bag 1 install Now click on the boingbag39-1 icon OS3.9 boing bag 1 install Unarc will open then select the amiga programs folder and press ok OS3.9 boing bag 1 install Unarc will extract the boing bag

When complete do the same for boingbag39-2 OS3.9 boing bag 1 install Now open boinbag3.9-1 folder And click on install icon OS3.9 boing bag 1 install Click proceed OS3.9 boing bag 1 install Click proceed OS3.9 boing bag 1 install Select system then Click proceed OS3.9 boing bag 1 install Click proceed OS3.9 boing bag 1 install Click proceed OS3.9 boing bag 1 install Then it will install the update OS3.9 boing bag 1 install Click proceed OS3.9 boing bag 1 install Click proceed When the workbench screen apears Then press f12 to open winuae config and press the reset button on winuae OS3.9 boing bag 2 install Once reloaded open the amiga programs folder and the boingbag3.9-2 folder and click on install OS3.9 boing bag 2 install Click proceed OS3.9 boing bag 2 install Click proceed with install OS3.9 boing bag 2 install Click proceed OS3.9 boing bag 2 install Select system then press proceed OS3.9 boing bag 2 install Press proceed OS3.9 boing bag 2 install Press install rom update OS3.9 boing bag 2 install Press proceed OS3.9 boing bag 2 install Press proceed You will return back to the workbench screen Then press f12 to open the winuae config then press the reset button on winuae OS3.9 boing bag 2 complete Now lets get ready for cwb39 CWB OS3.9 Install Press f12 to open the winuae config onto the hard drive menu Now remove the amiga programs harddrive dh1: And add new hardfile Select the cwb3.9 hardfile where you put it then press the reset button on winuae CWB OS3.9 Install You may get an error about not finding the 3.9 workbench file just click cancel Now we have an install cwb3.9 icon so click it CWB OS3.9 Install Press enter on keyboard CWB OS3.9 Install Press enter on keyboard CWB OS3.9 Install Now wait CWB OS3.9 Install Press enter CWB OS3.9 Install Install artwork CWB OS3.9 Install Please wait CWB OS3.9 Install Press enter CWB OS3.9 Install Press enter CWB OS3.9 Install I selected higher colours CWB OS3.9 Install Press enter CWB OS3.9 Install I selected re-gen CWB OS3.9 Install Press enter CWB OS3.9 Install Press enter CWB OS3.9 Install I enabled copper CWB OS3.9 Install Press enter CWB OS3.9 Install Press enter CWB OS3.9 Install When the workbench screen shows press f12 for winuae config Then on the hardrive menu remove dh0: CWB OS3.9 Install Then click on dh1: CWB OS3.9 Install And change dh1 to dh0: then press ok Then press the reset button on winuae CWB OS3.9 Welcome to cwb 3.9 congratulations CWB OS3.9 Piccy of the folders CWB OS3.9 Made by John Mansfield Using Winuae Microsoft sniping tool Powerpoint Acrobat X