Report-Off Lighting Design (Page 1)

REPORT how to design a good lighting system, A TECHNICAL one can save costs with better comfort giving a better quality of life, better PRESENTATION ON performance and productivity. The Question and Answer session “OFFICE LIGHTING was lively and active, with questions on how the new standard compares to DESIGN” the British Standards currently in use, and requests for more elaboration on design in terms of spot and average Reported by: Ir. Mah Soo, Electrical Engineering Technical Division luminance. The speaker fielded the questions to the satisfaction of the participants. technical presentation on “Office The Speaker then touched on the The Chairman concluded the A Lighting Design” was elements of quality and quantity of successfully organised by the IEM lighting with special focus on office presentation with a summary of the Electrical Engineering Technical lighting design with illustrations on highlights of the presentation and Division on Friday, 12 December 2003 task area, direct and reflected glare, invited the participants to show their at 5:30p.m. at IEM Conference Room colour aspects and the maintenance appreciation to the Speaker in the A, Bangunan Ingenieur, Petaling Jaya. factor. usual manner. He then presented a The presentation attracted 75 He concluded that the new token of appreciation to the Speaker. participants. The speaker was Mr. EN12464-1 needs to be studied for The session concluded with a note of Marius Wouters, who is the Senior harmonisation with the European thanks to all the members of the Application Specialist, Indoor Lighting standards. The aim of lighting design organising committee, the Speaker at Philips Lighting Design And is directed to the human aspects such and Philips Malaysia, and most of all to Application Centre (Lidac). He as visual comfort, visual environment the participants for making the session graduated with a degree in physics and safety. With the understanding of a success. from Dordrecht Technical High School. He joined Philips in 1977 in the field of fundamental physics research, followed by positions in the development of lamps in the Lighting Sang Yin Sendirian Berhad (74322D) Division. He has vast experience in the 2, Lot 1280, Jalan Balakong, Batu 11, Cheras, field of lighting design and 43200 Kajang, Selangor. applications after having worked on E-mail: [email protected] numerous indoor and outdoor lighting designs and applications in Europe. We Specialised In: The session commenced with the Session Chairman, Ir. Mah Soo, Manufacturing of Cast welcoming all present followed by the Iron and Stainless Steel introduction of the Speaker, Mr Marius Penstocks/Sluice Gates, Wouters. Flap Valve, Flat Seat The Speaker started with the Valve and Sand Ejectors introduction of the new European for Waterwoks, Sewerage norm for optics for offices. This was Treatment Plants followed by the discussion on new Heavy Duty Stainless and Irrigations European Standard EN12464-1, which Steel Penstock Cast Iron Penstock specifies the requirements for lighting TEL: 03-9074 2723 / 90742726 FAX: 03-9074 2719 systems for indoor workplaces. 21 JURUTERA (SEPTEMBER 2004).

Load more