DOCSLIB.ORG

Process Check Report Index

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Process Check Report Index Process Checksheets Issue Control (HBQSC Form No. Q7B-577; Issue1) HBQSC Checklist Reference Approval Process Title Reference Specification Category Ref Issue HBQSC/QA/SC100(M) Stress Relieving Of Steels & Nickel Alloys 1 BAEP 9009 5n HBQSC/QA/SC101(M) Metal To Metal Bonding With Redux Film DTD 775 1 BAEP 9001 7a, 8t BAEP 4022 & HBQSC/QA/SC102(M) Chromic/Sulphuric Pickling Of Aluminium & Aluminium Alloys 1 4y 9062 HBQSC/QA/SC103(M) Magnetic Flaw Detection 1 BAEP 2502 3e 6c, 6d, 6e, 6f. HBQSC/QA/SC104(M) Fusion Welding & Brazing 1 BAEP 4521 6g, 6h, 6j HBQSC/QA/SC105(M) Chromic Acid Anodising 1 BAEP 0002 3a, 4a HBQSC/QA/SC106(M) Application Of Primer To Aircraft Internal & External Surfaces 1 BAEP 3527 4i HBQSC/QA/SC107(M) Hard Anodising 1 BAEP 0012 4b 4f, 4g, 4h, 4j, HBQSC/QA/SC108(M) Cadmium Plating Of Steels, Titanium & Copper Alloys 1 BAEP 1514 5o HBQSC/QA/SC109(M) Chrome Passivation Of Cadmium And Zinc 1 BAEP 1516 12o HBQSC/QA/SC110(M) Appcn Of Flexible Permeable Finish To Aircraft Internal Surfaces 1 BAEP 3528 4t HBQSC/QA/SC111(M) Chromate Treatment Of Magnesium Based Alloys 1 BAEP 0005 4s HBQSC/QA/SC112(M) Forging Of Aerospace Fasteners 1 NA 11q HBQSC/QA/SC113(M) Penetrant Flaw Detection 1 BAEP 2501 3b, 3c HBQSC/QA/SC114(M) Nitriding Of Steels (Using Ammonia Gas) 1 BAEP 4509 5h BAEP 4510 & HBQSC/QA/SC115(M) Contour Etching Of Aluminium & Aluminium Alloys 1 12c 4683 HBQSC/QA/SC116(M) Chromic/Sulphuric Pickling Of Aluminium & Aluminium Alloys 1 BAEP 9099 4y HBQSC/QA/SC117(M) Bronze/Copper Plating Of Steel Components 1 BAEP 1520 4k HBQSC/QA/SC118(M) Hard Chrome Plating 1 BAEP 1519 4m HBQSC/QA/SC119(M) Sulphuric Acid Anodising 1 BAEP 0003 4c HBQSC/QA/SC120(M) Chromate Conversion Coating For Aluminium Alloys 1 BAEP 0004 4r 5a, 5b, 5c, 5d, HBQSC/QA/SC121(M) Heat Treatment Of Aluminium & Its Alloys 1 BAEP 9006 5l & 5v HBQSC/QA/SC122(M) Phosphating Treatments For Steels 1 BAEP 0006 4u HBQSC/QA/SC123(M) Colour Anodising (Chromic Acid) 1 BAEP 0007 4e HBQSC/QA/SC124(M) Zinc Spraying 1 BAEP 1517 4z HBQSC/QA/SC125(M) Aluminium Spraying 1 BAEP 1518 4v HBQSC/QA/SC126(M) The Anodic Treatment Of Titanium & Titanium Alloys 1 BAEP 0016 4d HBQSC/QA/SC127(M) Surface Improvement By The Use Of Glass Beads 1 BAEP 2007 12t HBQSC/QA/SC128(M) Phosphoric Acid Anodising Of Al. Alloys For Structural Bonding. 1 BS 24554 19p HBQSC/QA/SC129(M) Adhesive Film Structural Modified Epoxy 250-300°F Curing. 1 BS 23724 19o HBQSC/QA/SC130(M) Corrosion Inhibiting Adhesive Primer. 1 BS 23865 19q BAEP 4022 & HBQSC/QA/SC131(M) Bonding With Redux Film DTD 775 1 7a, 8t 9062 HBQSC/QA/SC132(M) Hardness Testing - Metallic Materials 1 BAEP 9226 3d HBQSC/QA/SC133(M) Vacu Blasting (With Dry Aluminia Grit) 1 BAEP 2002 12s HBQSC/QA/SC134(M) Electrical Conductivity Testing - Aluminium Alloys 1 BAEP 9088 3j HBQSC/QA/SC135(M) Aerospace Fastener Manufacturers 1 NA 19j, 19k HBQSC/QA/SC136(M) Adhesive Bonding Metal-to-Metal and Sandwich Construction 1 BS 2647 19n HBQSC/QA/SC137(M) Soldering Of Electrical Components 1 6r HBQSC/QA/SC138(M) Ultrasonic Flaw Detection 1 BAEP 5052 3g HBQSC/QA/SC139(M) Eddy Current Testing 1 BAEP 2503 3k HBQSC/QA/SC140(M) Radiography 1 NA 3f HBQSC/QA/SC141(M) Electric Resistance Welding 1 BAEP 4523 6k, 6m, 6n, 6p HBQSC/QA/SC142(M) Flame Blazing Of Aluminium Alloys With 10-12% Si/Al Rod 1 BAEP 4535 6a Steel Shot Peening For Improved Fatigue, Stress Corrosion & Fretting HBQSC/QA/SC143(M) 1 BAEP 2009 19m Corrosion HBQSC/QA/SC144(M) Shot Peening For Improved Fatigue Resistance 1 BAEP 2001 19d HBQSC/QA/SC145(M) Impregnation Treatment Of Light Alloy Castings 1 BAEP 1006 12a HBQSC/QA/SC146(M) Torch Brazing Of Copper, Copper Base Alloys, Nickel Alloys And Steels 1 BAEP 4520 6s HBQSC/QA/SC147(M) Soldering 1 BAEP 4522 6q HBQSC/QA/SC148(M) Thread Rolling 1 NA 1h MIL-H-6875 & HBQSC/QA/SC149(M) Liquid Salt Bath Nitriding (Non-Cyanide Bath) 1 5za AMS 2753 MIL-H-6875 & HBQSC/QA/SC150(M) Heat Treatment (American) 1 5zb AMS 2750 HBQSC/QA/SC151(M) Protective Plating Of Faces Of The Heads Of Steel Bolts For External Use 1 DHA 369 19l HBQSC/QA/SC152(M) Shot Peen Forming (Ferrous & Non Ferrous) 1 BAEP 4634 19e The Manufacture Of Epoxy Resin Impregnated Glass Fibre And HBQSC/QA/SC154(M) Honeycomb Core Sandwich Structural Components By The Vacuum Bag 1 BAEP 4026 7c Technique BAEP 4514, 11a, 11b, 11u HBQSC/QA/SC155(M) Manufacture Of Forgings And Castings 1 4515 & 4518 11w HBQSC/QA/SC158(M) Etch Inspection Of Machined Components Manufactured From Steel 1 BAEP 4544 3h HBQSC/QA/SC159(M) Supply Procedure For Forgings 1 BAEP 4515 11u, 11w HBQSC/QA/SC160(M) Swaging Of Aircraft Cables 1 BAEP 4505 2p HBQSC/QA/SC161(M) Pickling Of Titanium & Titanium Alloys 1 BAEP 9056 12l HBQSC/QA/SC162(M) De-Oxidation of Aluminium Alloys 1 BAEP 9225 12w HBQSC/QA/SC163(M) Heat Treatment Of Titanium & Its Alloys 1 BAEP 9007 5r, 5s, 5t & 5u 5g, 5k, 5m, 5n HBQSC/QA/SC164(M) Heat Treatment of Steels 1 BAEP 9008 & 5o Preparation of Titanium, Stainless Steel, Copper and Copper Alloy for HBQSC/QA/SC165(M) 1 BAEP 1512 4n subsequent Electro-Plating HBQSC/QA/SC166(M) Raw Material Manufacturer 1 NA 19h HBQSC/QA/SC167(M) Manufacture Of Springs 1 NA 2e Def Stan 03-8, HBQSC/QA/SC168(M) Electro Deposition Of Tin 1 DHS 418 & 19w DHA 315 Application Of Anti-Static Paint To Composite Materials Other Than HBQSC/QA/SC169(M) 1 BAEP 3537 19x Carbon Fibre HBQSC/QA/SC170(M) Zinc Plating for Steels, Copper and Copper Alloys 1 BAEP 1521 4z HBQSC/QA/SC171(M) The Application of Low Temperature Stoving Enamel 1 BAEP 3532 4zb HBQSC/QA/SC172(M) Hot Isostatic Pressing of Casting 1 NA 19c HBQSC/QA/SC173(M) The Application of Air-Drying Synthetic Enamel 1 BAEP 3533 4za HBQSC/QA/SC174(M) The Application of Polyurethane Finish 1 BAEP 3504 4zf HBQSC/QA/SC175(M) Plating, Cadmium (Electrodeposited) 1 AMS-QQ-P-416 19y HBQSC/QA/SC176(M) Chemical Conversion Coatings on Aluminium and Aluminium Alloys 1 MIL-C-5541 19z HBQSC/QA/SC177(M) Chromium Plating (Electrodeposited) 1 AMS-QQ-C-320 19ac HBQSC/QA/SC178(M) The Application of Cold Curing Epoxide Finish 1 BAEP 3505 4zc HBQSC/QA/SC179(M) The Application of High Temperature Stove Enamel to Steel Parts 1 BAEP 3506 4zd HBQSC/QA/SC180(M) Protective Treatments of Magnesium Based Alloys 1 BAEP 3507 4ze HBQSC/QA/SC181(M) Electro Deposition Of Silver 1 Def Stan 03/9 4p HBQSC/QA/SC182(M) The Application Of Acrylic Finishes 1 BAEP 3508 4zg HBQSC/QA/SC183(M) The Application Of Etching Primer 1 BAEP 3510 4zh The Application Of Cold Epoxide Primer to Metallic and Glass Reinforced HBQSC/QA/SC184(M) 1 BAEP 3512 4zi Surfaces HBQSC/QA/SC185(M) Coating Metal Parts With Nylon 1 BAEP 4517 10r HBQSC/QA/SC186(M) The Application of Anti-Fretting Primer 1 BAEP 3513 4zk HBQSC/QA/SC187(M) The Application Of Low Temperature Stoving Crinkle Enamel 1 BAEP 3531 4zl HBQSC/QA/SC188(M) Application of Abrasion Resistant Finishing Scheme 1 BAEP 3536 4zm Application of Differentially Strippable Paint Scheme to Aircraft Exterior HBQSC/QA/SC189(M) 1 BAEP 3545 4zn Surfaces HBQSC/QA/SC190(M) Application of Anti-Erosion Coating 1 BAEP 3547 4zo The Application of Polyurethane Finish to Aircraft External Surfaces HBQSC/QA/SC191(M) 1 BAEP 3538 4zp Previously Epoxide Primed (Differential Stripping Capability not required) HBQSC/QA/SC192(M) Inside Protection of Tanks Containing Elsanol etc 1 DHA 388 4zq HBQSC/QA/SC193(M) Application of Heat Resisting Stove Enamel 1 BAEP 3519 4zr BAEP0013 & HBQSC/QA/SC194(M) Passivation of Corrosion Resisting Steels and Nickel Based Alloys 1 4zs AMS-QQ-P-35.
Load more

Recommended publications
  • HMS1-1011QPL BOEING MATERIAL SPECIFICATION Revision - QUALIFIED PRODUCT LIST 31 October 2008 the BOEING COMPANY Page 1 of 1
    HMS1-1011QPL BOEING MATERIAL SPECIFICATION Revision - QUALIFIED PRODUCT LIST 31 October 2008 THE BOEING COMPANY Page 1 of 1 BARE AL ALY SH FOR HELICOPTER ROTOR BLADE SKINS THE FOLLOWING SOURCES ARE APPROVED FOR THE PROCUREMENT OF BARE ALUMINUM ALLOY SHEET FOR HELICOPTER ROTOR BLADE SKINS IN ACCORDANCE WITH THE REQUIREMENTS OF MCDONNELL DOUGLAS HELICOPTER COMPANY MATERIAL SPECIFICATION 1-1011. Supplier Info Supplier Comments BE10034516 APPROVED TO HMS1-1011 IN ACCORDANCE WITH ATTACHED EXCEPTIONS. PARAGRAPH ALUMINUM CO OF AMERICA 4.2.1 (SCRATCHES) PARAGRAPH 4.2.2 (MIL DEFECTS) PARAGRAPH 4.3 (CORROSION 4879 STATE ST SUSCEPTABILITY) BETTENDORF, IA 52722 USA UNCONTROLLED WHEN PRINTED CAGE CODE 02731 HMS11-1109QPL BOEING MATERIAL SPECIFICATION Revision - QUALIFIED PRODUCT LIST 31 October 2008 THE BOEING COMPANY Page 1 of 2 TITANIUM FORGINGS BETA PROCESSED 6AL-4V THE FOLLOWING SOURCES ARE APPROVED FOR THE PROCUREMENT OF TITANIUM FORGINGS IN ACCORDANCE WITH THE REQUIREMENTS OF MCDONNELL DOUGLAS HELICOPTER COMPANY MATERIAL SPECIFICATION 11-1109. Supplier Info Supplier Comments BE10038732 PACIFIC FORGE INC 10641 ETIWANDA AVE FONTANA, CA 92337-6909 USA Supplier Info Supplier Comments BE10029768 RMI TITANIUM COMPANY 1000 WARREN AVE NILES, OH 44446-1168 USA Supplier Info Supplier Comments BE10037611 CONSOLIDATED INDUSTRIES, INC. 677 MIXVILLE RD CHESHIRE, CT 06410-3836 USA Supplier Info Supplier Comments BE10029096 MCWILLIAMS FORGE COMPANY INC 387 FRANKLIN AVE ROCKAWAY, NJ UNCONTROLLED WHEN PRINTED CAGE CODE 02731 Supplier Info Supplier Comments 07866-4000 USA HMS11-1109QPL Revision - Page 2 of 2 UNCONTROLLED WHEN PRINTED CAGE CODE 02731 HMS11-1110QPL BOEING MATERIAL SPECIFICATION Revision - QUALIFIED PRODUCT LIST 31 October 2008 THE BOEING COMPANY Page 1 of 1 TITANIUM ALLOY 6A1-4V PLATE; HIGH FRACTURE TOUGHNESS THE FOLLOWING SOURCES ARE APPROVED FOR THE PROCUREMENT OF TITANIUM ALLOY PLATE IN ACCORDANCE WITH THE REQUIREMENTS OF MDHC MATERIAL SPECIFICATION 11-1110.
    [Show full text]
  • CIVIL AIRCRAFT ACCIDENT Report of the Court of Inquiry Into the Accidents to Comet G-ALYP on 10Th January, 1954 and Comet G-ALYY on 8Th April, 1954
    C.A.P. 127 MINISTRY OF TRANSPORT AND CIVIL AVIATION CIVIL AIRCRAFT ACCIDENT Report of the Court of Inquiry into the Accidents to Comet G-ALYP on 10th January, 1954 and Comet G-ALYY on 8th April, 1954 LONDON: HER MAJESTY'S STATIONERY oFFICE EIGHT SHILLINGS NET MINISTRY OF TRANSPORT AND CIVIL AVIATION CIVIL AIRCRAFT ACCIDENT Report of the Court of Inquiry into the Accidents to Comet G-ALYP on 10th January, 1954 and Comet G-ALYY on 8th April, 1954 LOND ON: HER MAJESTY'S ST ATIONER Y OFFICE 1955 House ofLords. 1st February, 1955. SIR, Your predecessor directed that Public Inquiries should be held into the causes and circumstances of two accidents which occurred in the Mediterranean to Comet aircraft, the first on the 10th January, 1954, to G-ALyP, the second on the 8th April, 1954, to G-ALYY. In pursuance of that direction I was, on the 8th September, 1954, appointed by the Lord Chancellor to be the Commissioner to hold the Inquiry and Sir William Scott Farren, C.B., M.B.E., F.RS., Professor William Jolly Duncan, C.B.E., D.Sc., F.RS., and Air Cottlmodore AlIen Henry Wheeler, O.B.E., were appointed Assessors. I now have the honour to present my Reports, each of which has been signed by all three Assessors to signify their agreement with it. With the agreement of the parties the two Inquiries were conducted at the same time in order to avoid unnecessary duplication. I have attached as appendices to the Report on the accident to G-ALYP: I.
    [Show full text]
  • Space Engineering Adhesive Bonding Handbook
    ECSS-E-HB-32-21A 20 March 2011 Space engineering Adhesive bonding handbook ECSS Secretariat ESA-ESTEC Requirements & Standards Division Noordwijk, The Netherlands ECSS‐E‐HB‐32‐21A 20 March 2011 Foreword This Handbook is one document of the series of ECSS Documents intended to be used as supporting material for ECSS Standards in space projects and applications. ECSS is a cooperative effort of the European Space Agency, national space agencies and European industry associations for the purpose of developing and maintaining common standards. This handbook has been prepared by the ECSS‐E‐HB‐32‐21A Working Group, reviewed by the ECSS Executive Secretariat and approved by the ECSS Technical Authority. Disclaimer ECSS does not provide any warranty whatsoever, whether expressed, implied, or statutory, including, but not limited to, any warranty of merchantability or fitness for a particular purpose or any warranty that the contents of the item are error‐free. In no respect shall ECSS incur any liability for any damages, including, but not limited to, direct, indirect, special, or consequential damages arising out of, resulting from, or in any way connected to the use of this document, whether or not based upon warranty, business agreement, tort, or otherwise; whether or not injury was sustained by persons or property or otherwise; and whether or not loss was sustained from, or arose out of, the results of, the item, or any services that may be provided by ECSS. Published by: ESA Requirements and Standards Division ESTEC, P.O. Box 299, 2200 AG Noordwijk The Netherlands Copyright: 2011© by the European Space Agency for the members of ECSS 2 ECSS‐E‐HB‐32‐21A 20 March 2011 Change log ECSS‐E‐HB‐32‐21A First issue 20 March 2011 3 ECSS‐E‐HB‐32‐21A 20 March 2011 Table of contents Change log ...............................................................................................................
    [Show full text]
  • 1 the Fuselage AIRFRAMES and SYSTEMS
    1 The Fuselage SYSTEMS AND AIRFRAMES 1.1 Introduction The contents of this book will focus on the anatomy of the aeroplane and the various • Horizontal stabiliser (tailplane), systems that enable it to operate both on Vertical stabiliser (fin), all called the ground and in the air. the Empennage. • Flight controls Typically, an aeroplane is made up of the • Landing gear following main component parts: • Powerplant (engine) (See fig. AS 1.1) • Fuselage (the central body) • Wings (mainplanes) The fuselage is the central body of the aeroplane since the powerplant, wings, empennage and landing gear are attached Rudder Vertical stabiliser Elevator Flap Aileron Fairings Horizontal Wing stabiliser Tailgear Strut Main landing gear Engine cowling Main wing Main landing gear Fuselage Fig. AS 1.1 Main parts of the aeroplane The Fuselage 1-1 Airframes and Systems E5.indb 1 13.05.2008 13:25:05 AIRFRAMES AND SYSTEMS AND AIRFRAMES to it. Fuselages may be manufactured mounted directly on the fuselage or on using various design principals. A fuselage to the vertical fin. structure is a rigid body to which the wings, empennage, engine and landing gear are This chapter will also focus on the types attached. It also contains the flight crew, of material that are commonly used in passengers, equipment and cargo. The aircraft construction. fuselage can be made from a wide range of materials which can be riveted, bolted, screwed, welded or bonded together. 1.2 Types of Aircraft Construction At the beginning of aviation development, We will examine the fuselage construction aeroplanes were made with a structure in more detail later, and will briefly describe of wood or bamboo.
    [Show full text]
  • P3rep9p2 Environmental Durability of Adhesive Bonds
    Project 3 Environmental Durability of Adhesive Bonds Report No 9 Forensic Studies of Adhesive Joints. Part 2 - Bonded Aircraft Structure. A Beevers September 1995 PART 2 - Bonded Aircraft Structure Contents 1. INTRODUCTION..........................................................................................1 2. HISTORY OF THE BONDED SAMPLES.....................................................2 3. HISTORICAL DEVELOPMENT OF REDUX ADHESIVES...........................5 3.1 Origins.................................................................................................................................... 5 3.2 Aero Research And De Havilland ......................................................................................... 5 3.3 Other Users ............................................................................................................................ 6 3.4 Redux Film ............................................................................................................................. 6 3.5 Comparison Of Redux Variants ............................................................................................ 7 4. MANUFACTURING PROCEDURES............................................................9 4.1 Surface Treatment ................................................................................................................. 9 4.2 Adhesive Application ........................................................................................................... 10 4.3 Curing Procedure................................................................................................................
    [Show full text]
  • Plasma Treatment for Adhesive Bonding of Aerospace Composite
    Plasma Pre-Treatment for Adhesive Bonding of Aerospace Composite Components A thesis submitted for the degree of Master of Philosophy by Berta Navarro Rodríguez College of Engineering, Design and Physical Sciences Department of Mechanical, Aerospace and Civil Engineering Brunel University London August 2016 The research on 'Plasma Treatment for Adhesive Bonding of Aerospace Composite Components' was carried out as a part-time MPhil programme, between February 2015 and August 2016 at the National Structural Integrity Research Centre (NSIRC, Cambridge), and awarded by Brunel University London (Department of Mechanical, Aerospace and Civil Engineering). This research was also performed in collaboration with TWI Ltd (Cambridge). ABSTRACT OF THE DISSERTATION Plasma Treatment for Adhesive Bonding of Aerospace Composite Components by Berta Navarro Rodríguez Master of Philosophy in Mechanical, Aerospace and Civil Engineering Brunel London University, 2016 Senior Lecturer Aerospace Engineering – Cristinel Mares Consultant Adhesive Technology TWI – Ewen Kellar Key words: composites, aerospace, cold atmospheric pressure plasma, adhesive bonding, surface pre-treatment A cold atmospheric pressure plasma source was investigated as an alternative pre-treatment for carbon fibre reinforced epoxy substrates prior to bonding. For reference, common surface pre-treatments were also investigated (peel ply, manual abrasion, and grit blasting). In the aerospace industry, the peel ply, is usually added to one side of the composite surface during manufacture and peeled off prior to bonding. Peel ply can be used independently or in combination with other techniques. The strength of the bonded joints of the different pre-treatments was assessed through tensile lap shear tests. It was found that combining peel ply with plasma increased the joint strength by 10% whereas manual abrasion or grit blasting after peel ply improved the strength of the joints by 15% and 20% respectively.
    [Show full text]
  • Impact of Aluminium Adhesive Joints for the Automotive Industry As a Function of Environmental Conditions and Adherend Thickness
    Impact of Aluminium Adhesive Joints for the Automotive Industry as a Function of Environmental Conditions and Adherend Thickness Submitted by: Daniel Neto Rosendo A dissertation submitted for master’s degree of mechanical engineering – FEUP Supervisor: Lucas F M da Silva Co-Supervisor: Guilherme Viana July 2015 Abstract The use of adhesive joints in the automotive industry has been increasingly important over the years. Other more traditional bonding methods such as welding or riveting cannot compete with certain characteristics that only adhesive bonding can provide. An adhesive joint has a good stress distribution and, when used appropriately, behaves surprisingly well under impact and cyclical loads or fatigue, all while being lighter than its counterparts. Weight is an issue in the automotive industry since concerns regarding environmental impact and fuel efficiency of vehicles are emerging, which leads to an effort among manufacturers to develop lighter and more economic vehicles without compromising luxury or safety features. In order to properly design an adequate adhesively bonded structure for the automotive industry it is required to predict its behaviour when subjected to different conditions by analysing its deformation as well the normal and shear load distribution throughout the adhesive and the energy the joint is able to absorb. This thesis focuses on evaluating the impact of aluminium adhesive joints as a function of temperature and moisture in order to understand how these conditions affect their mechanical properties and behaviour. After preparations of the required specimens (using two different adhesives and adherend thicknesses), several tests have been made in order to determine these properties and compare them to the predictions made using analytical methods.
    [Show full text]
  • Copy of Airbus Specification Nadcap Commodity
    Airbus Commercial Aircraft Specification / Nadcap commodity Cross Table issued June 18, 2021 Sorted by Airbus Specification Reference Foreword: This table is given for information only and shall not be considered as a reference. It is an help for establishing the link betweeen Airbus specifications and Nadcap commodities mandated by Airbus. Nadcap Commodities mandated by Airbus are: Since 2004: COMP = Composite Manufacturing (Parts) / NDT = Non Destructive Testing / HT = Heat Treating Since 2005: CP = Chemical Processing (inclusing painting) / ETG = Electronics (Printed Boards, Circuit Card Assemblies) / MTL = Metallic Material Testing Since 2009: NMMT = Non Metallic Material Testing (Parts) / SE = Surface Enhancement / WLD = Welding Since 2012: NMMM = Non Metallic Material Manufacture (Raw Material) / NMMT = Non Metallic Material Testing (Raw Material) Since 2016: NM = Non Conventionnal Machining (EDM, LBM) / M&I = Measurement and Inspection (CMM, LT, AA) / MMM = Metallic Materials Manufacturing (Forgings) Since 2017: WLD = Welding (Additive Manufacturing) Since 2019: ASA = Aero Structures Assembly / FLU = Fluid Distribution Systems Changes from previous version dated May 14, 2021 are highlighted in Yellow Airbus Specification Specification Designation Nadcap Commodity Audit Criteria Reference 80-T-10-1000 FERTIGUNGSANWEISUNG ZIELSETZUNG out out 80-T-20-1000 FERTIGUNGSANWEISUNG FORM UND AUFBAU out out 80-T-20-3000 FERTIGUNGSANWEISUNG ERSTELLUNG FREIGABE ÄNDERUNG UND VERWALTUNG out out 80-T-21-0003 VERGLEICHSLISTE LYNX-HUBSCHRAUBER 80
    [Show full text]
  • The De Havilland Aeronautical Technical School at Stag Lane and Kingsbury
    The de Havilland Aeronautical Technical School at Stag Lane and Kingsbury he de Havilland Aeronautical Technical School was established in 1928. Although overall management of Tthe School and the training of aircraft students was transferred to Hatfield in 1934, engine and propeller students continued to be trained at Stag Lane. During the Second World War the training workshops were moved to Kingsbury Works, where Vanden Plas were engaged in building Tiger Moths and Mosquito wings. Over the years a number of former students have written their recollections of training. They are presented in this compilation, both as a permanent record and, it is hoped, as a stimulus for others to add their own reminiscences. Some have appeared before, in Pylon or in a Newsletter, and others are new. The captioned photograph below, looking approximately south-easterly, has been contributed by Geoff Callow; it appeared in the 21st Birthday Issue of Pylon in June 1949. The picture on page 3, taken five years later, shows that although much new factory building had taken place, housing was encroaching... This compilation is by Roger de Mercado, who hopes to improve upon it and add to it as new contributions are received or old items discovered. Issue 1 20th September 2011 de Havilland Aeronautical Technical School Association 2011 www.dhaetsa.org.uk DHAeTS AT STAG LANE AND KINGSBURY Stag Lane Aerodrome his map of the area, dated 1932 illustrates the location of the Aerodrome. Kingsbury Works was at TKingsbury Green, in the lower right-hand corner of the map. The photograph on the following page was taken approximately in the direction of the arrow.
    [Show full text]
  • Canada Aviation and Space Museum Aircraft
    CANADA AVIATION AND SPACE MUSEUM AIRCRAFT de HAVILLAND D.H.106 COMET RCAF COMET SERIAL VC 5301 (NOSE SECTION ONLY) INTRODUCTION The de Havilland D.H.106 Comet was the first production commercial airliner. Developed and manufactured by de Havilland Company at Hatfield, Hertfordshire, in the United Kingdom, the Comet Mark 1 prototype first flew on 27 July 1949. It featured a very aerodynamically clean design with four de Havilland Ghost jet engines buried in the wings, a pressurized fuselage and large square windows. In comparison to noisy propellor-driven airliners of the same era, this new design offered a quiet and comfortable passenger cabin and consequently showed signs of already being a commercial success at its 1952 debut. But not only were commercial airlines interested, various militaries around the world also took notice. The Royal Canadian Air Force (RCAF) had formulated a requirement for two aircraft for high-speed transport and VIP use. An inspection of the Comet by the RCAF in 1952 culminated in an order for two aircraft. When the de Havilland Comet was introduced into RCAF service in early 1953, it gave the RCAF the distinction of being the first air force in the world to operate jet transports. The prototype DH.106 Comet “G-ALVG” in 1949 - (Author’s Collection) However, just a year after entering commercial service, the Comet began suffering mysterious catastrophic and fatal accidents, with three of the aircraft breaking apart in mid-flight. Consequently, the Comet was withdrawn from service and further extensively tested to discover the true cause of the accidents; the first incident being incorrectly blamed on adverse weather.
    [Show full text]
  • Compilation of Radiation Damage Test Data, Part I: Cable- Insulating Materials, CERN 79–04 (1979)
    1 INTRODUCTION Investigations into the degradation of materials and components which are exposed to ionizing radiation have been carried out in many applications, such as nuclear reactors, fusion reactors, high-energy accelerators, medical and industrial irradiation facilities, space projects, etc. At the European Organization for Nuclear Research (CERN), from the beginning of the high-energy particle accelerators, radiation damage test studies have been centred on organic and inorganic materials [1]–[9]. For several decades, electronic and optical components and devices, as well as other materials that are used in the construction and operation of high-energy accelerators and particle detectors, have been included in the studies. Apart from electronic and optical devices, the organic materials are the ones most sensitive to radiation. As a consequence of this, a large number of radiation tests have been made on these materials and the results are extensively documented. Design engineers are, however, often faced with the problem of finding the desired information quickly within the available literature. We therefore decided to publish our radiation damage test results on organic materials in the form of catalogues. The first catalogue, published more than twenty years ago, concerned organic materials used as insulation and sheathing for electric cables [10], a second edition was published in 1989 and concerns halogen-free cable-insulating materials [11]. The second catalogue dealt with thermosetting and thermoplastic resins, the majority being epoxies used for magnet coil insulations [12], the second edition was published in 1998 and concerns the results obtained for thermoset and thermoplastic resins as well as composite materials [13].
    [Show full text]
  • De Havilland Comet Was the First Commercial Jet Aircraft, and Ushered in the ‘Jet Age’ on 2Nd May 1952 by Taking Fare Paying Passengers from London to Johannesburg
    Lecture organised by RAeS Hamburg Branch Hamburg Aerospace Lecture Series (DGLR, RAeS, VDI, ZAL, HAW Hamburg) 24.01.2019 HAW Hamburg (Hamburg University of Applied Sciences) CC BY-NC-SA Download: http://hamburg.dglr.de http://doi.org/10.5281/zenodo.2551089 RAeS Hamburg in cooperation with the DGLR, VDI, ZAL & HAW invites you to a lecture The Real Story of the Comet Disasters Prof. Paul Withey, School of Metallurgy and Materials, University of Birmingham Date: Thursday 24 January 2019, 18:00 Location: HAW Hamburg Berliner Tor 5, (Neubau), Hörsaal 01.11 Lecture followed by discussion No registration required ! Entry free ! The de Havilland Comet was the first commercial jet aircraft, and ushered in the ‘Jet Age’ on 2nd May 1952 by taking fare paying passengers from London to Johannesburg. This aircraft contained a number of new technologies to allow the aircraft to operate economically and to enhance the flying experience for the passengers. For a number of months the aircraft led the world by halving journey times and offering comfort levels which could not be matched on other, piston engine aircraft. However, two accidents in 1954 grounded the Comet fleet and the subsequent investigation has ensured the Comet has notoriety as an example of fatigue failure. This high profile incident encouraged much work in the field of fatigue and this has led to a much better understanding of the science of fatigue and the use of fracture mechanics to evaluate the life of components and structures. This talk will look at the history of the Comet aircraft, from concept to entry into service, review the accident investigation and use modern analysis to review the fatigue failure which sparked the research.
    [Show full text]