DOCSLIB.ORG

M2V User Guide

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
M2V User Guide M2V User Guide Motherboard E2582 Checklist First Edition May 2006 Copyright © 2006 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. ii Contents Notices ........................................................................................... vii Safety information ..........................................................................viii About this guide .............................................................................. ix Features How this guide is organized ................................................... ix Where to find more information ............................................. ix Conventions used in this guide ............................................... x Typography ............................................................................. x M2V specifications summary .......................................................... xi Chapter 1: Product introduction 1.1 Welcome! .............................................................................1-1 1.2 Package contents ................................................................1-1 1.3 Special features ...................................................................1-2 1.3.1 Product Highlights ...................................................1-2 1.3.2 Unique ASUS features ............................................1-4 Chapter 2: Hardware information 2.1 Before you proceed .............................................................2-1 2.2 Motherboard overview .........................................................2-2 2.2.1 Placement direction .................................................2-2 2.2.2 Screw holes .............................................................2-2 2.2.3 Motherboard layout .................................................2-3 2.2.4 Layout Contents ......................................................2-4 2.3 Central Processing Unit (CPU) ............................................2-6 2.3.1 Installing the CPU....................................................2-6 2.3.2 Installing the heatsink and fan .................................2-8 2.3.3 Connecting the CPU fan cable ..............................2-10 2.4 System memory .................................................................2-11 2.4.1 Overview ...............................................................2-11 2.4.2 Memory configurations ..........................................2-12 2.4.3 Installing a DIMM ...................................................2-13 2.4.4 Removing a DIMM .................................................2-13 2.5 Expansion slots ..................................................................2-14 2.5.1 Installing an expansion card ..................................2-14 2.5.2 Configuring an expansion card..............................2-14 2.5.3 Interrupt assignments ............................................2-15 2.5.4 PCI slots ................................................................2-16 2.5.5 PCI Express x1 slot ...............................................2-16 iii Contents Safeguards 2.5.6 PCI Express x16 slot .............................................2-16 2.6 Jumpers .............................................................................2-17 2.7 Connectors ........................................................................2-19 2.7.1 Rear panel connectors ..........................................2-19 2.7.2 Internal connectors ................................................2-21 Chapter 3: Powering up 3.1 Starting up for the first time ..................................................3-1 3.2 Powering off the computer ...................................................3-2 3.2.1 Using the OS shut down function ............................3-2 3.2.2 Using the dual-function power switch ......................3-2 Chapter 4: BIOS setup 4.1 Managing and updating your BIOS ......................................4-1 4.1.1 Creating a bootable floppy disk ...............................4-1 4.1.2 Using AFUDOS to update the BIOS ........................4-2 4.1.3 Using AFUDOS to copy BIOS from PC ...................4-3 4.1.4 Using ASUS EZ Flash to update the BIOS..............4-4 4.1.5 ASUS CrashFree BIOS 3 Utilities ...........................4-5 4.1.6 ASUS Update ..........................................................4-7 4.2 BIOS Setup program ...........................................................4-9 4.2.1 BIOS menu screen ................................................4-10 4.2.2 Menu bar ...............................................................4-10 4.2.3 Navigation keys .....................................................4-10 4.2.4 Menu items ............................................................4-11 4.2.5 Sub-menu items ....................................................4-11 4.2.6 Configuration fields................................................4-11 4.2.7 Pop-up window ......................................................4-11 4.2.8 Scroll bar ...............................................................4-11 4.2.9 General help ..........................................................4-11 4.3 Main menu .........................................................................4-12 4.3.1 System Time .........................................................4-12 4.3.2 System Date .........................................................4-12 4.3.3 Legacy Diskette A .................................................4-12 4.3.4 Primary and Secondary IDE Master/Slave ...........4-13 4.3.5 System Information ...............................................4-14 4.4 Advanced menu .................................................................4-15 iv Contents 4.4.1 JumperFree Configuration.....................................4-15 4.4.2 USB Configuration.................................................4-15 4.4.3 CPU Configuration ................................................4-17 4.4.3 CPU Configuration ................................................4-17 4.4.4 Chipset ..................................................................4-21 4.4.5 Onboard Devices Configuration ............................4-22 4.4.6 PCI PnP .................................................................4-23 4.5 Power menu .......................................................................4-25 4.5.1 Suspend Mode ....................................................4-25 4.5.2 Repost Video on S3 Resume ...............................4-25 4.5.3 ACPI 2.0 Support .................................................4-25 4.5.4 ACPI APIC Support ..............................................4-25 4.5.5 APM Configuration ................................................4-26 4.5.6 Hardware Monitor ..................................................4-27 4.6 Boot menu .........................................................................4-29 4.6.1 Boot Device Priority ...............................................4-29 4.6.2 Boot Settings Configuration...................................4-30 4.6.3 Security .................................................................4-31 4.7 Tools menu ........................................................................4-34 4.8 Exit menu ...........................................................................4-35 Chapter 5: Software support 5.1 Installing an operating system .............................................5-1 5.2 Support CD information .......................................................5-1 5.2.1 Running the support CD ..........................................5-1 5.2.2 Drivers menu ...........................................................5-2 5.2.3 Utilities menu ...........................................................5-3 5.2.4 Make disk menu ......................................................5-4
Load more

Recommended publications
  • SAS Enters the Mainstream Although Adoption of Serial Attached SCSI
    SAS enters the mainstream By the InfoStor staff http://www.infostor.com/articles/article_display.cfm?Section=ARTCL&C=Newst&ARTICLE_ID=295373&KEYWORDS=Adaptec&p=23 Although adoption of Serial Attached SCSI (SAS) is still in the infancy stages, the next 12 months bode well for proponents of the relatively new disk drive/array interface. For example, in a recent InfoStor QuickVote reader poll, 27% of the respondents said SAS will account for the majority of their disk drive purchases over the next year, although Serial ATA (SATA) topped the list with 37% of the respondents, followed by Fibre Channel with 32%. Only 4% of the poll respondents cited the aging parallel SCSI interface (see figure). However, surveys of InfoStor’s readers are skewed by the fact that almost half of our readers are in the channel (primarily VARs and systems/storage integrators), and the channel moves faster than end users in terms of adopting (or at least kicking the tires on) new technologies such as serial interfaces. Click here to enlarge image To get a more accurate view of the pace of adoption of serial interfaces such as SAS, consider market research predictions from firms such as Gartner and International Data Corp. (IDC). Yet even in those firms’ predictions, SAS is coming on surprisingly strong, mostly at the expense of its parallel SCSI predecessor. For example, Gartner predicts SAS disk drives will account for 16.4% of all multi-user drive shipments this year and will garner almost 45% of the overall market in 2009 (see figure on p. 18).
    [Show full text]
  • M.2 2280 Sata Ssd
    Product Datasheet Version 1 M.2 2280 SATA SSD Product Name: I M 2 S 3 3 3 8 Capacity: 6 4 G B 、 1 2 8 GB、 2 5 6 G B 、 5 1 2 G B 、 1 T B I Revision History Revision Date Description Editor 0 May.7. 2019 Initial release Terry Chu 1 Oct. 18. 2019 Change to IA format Steven Wang 2 Apr. 24. 2020 Add DWPD Austin Lee II Table of Contents 1.0 General Description ........................................................................................................................... 2 2.0 Mechanical Specification ................................................................................................................. 3 2.1 Physical dimensions and Weight ........................................................................................... 3 2.2 Product Dimensions .................................................................................................................. 3 3.0 Product Specification ........................................................................................................................ 5 3.1 Interface and configuration ..................................................................................................... 5 3.2 Capacity ........................................................................................................................................ 5 3.3 Performance ................................................................................................................................ 5 3.4 Electrical ......................................................................................................................................
    [Show full text]
  • HDAMA Rev.G User's Guide
    HDAMA rev.G HDAMA User’s Guide Release Date:Jul.2005 3.02 Version: Appendix BIOS Hardware Overview Setup Install Arima ServerBoard Manual COPYRIGHTS AND DISCLAIMERS ..........................................C-I ATTENTION: READ FIRST! ...................................... C-II Overview GENERAL SAFETY PRECAUTIONS .......................................C-2 ESD PRECAUTIONS ........................................................C-2 OPERATING PRECAUTIONS ................................................C-2 ABOUT THIS USER'S MANUAL ...........................................C-3 GETTING HELP ...............................................................C-3 SERVERBOARD SPECIFICATIONS ........................................C-5 SERVERBOARD LAYOUT ...................................................C-6 SERVERBOARD MAP .......................................................C-7 I/O PORT ARRAY ............................................................C-7 Hardware Installation MAP OF JUMPERS ...........................................................C-9 JUMPER SETTINGS ........................................................C-10 INSTALLING MEMORY .....................................................C-11 RECOMMENDED MEMORY CONFIGURATIONS .......................C-13 INSTALLING THE PROCESSOR AND HEATSINK ......................C-14 MAP OF SERVERBOARD CABLE CONNECTORS ...................C-16 ATX POWER CONNECTORS ............................................C-17 FLOPPY DISK DRIVE CONNECTOR ...................................C-18 PRIMARY IDE CONNECTORS ............................................C-18
    [Show full text]
  • 2.5In USB 2.0 One Button Backup SATA External Hard Drive Enclosure
    2.5in USB 2.0 One Button Backup SATA External Hard Drive Enclosure Product ID: SAT2510BU2B This 2.5in External SATA Hard Drive Enclosure connects to a host computer through USB 2.0, allowing you to turn any standard 2.5in Serial ATA hard drive (SATA, SATA II, SATA III) into a highly portable storage solution. Large capacity drives (tested with up to 1TB) can be used to greatly enhance your computer's storage/backup capabilities. The SATA hard drive enclosure offers One Button Backup, allowing you to automate backups of data from the host computer to the external hard drive at the touch of a button. The external hard drive enclosure features a slim, lightweight design as well as an attractive black metal casing. The USB/SATA enclosure also includes a USB Y-cable that can be used to ensure sufficient power for higher capacity/higher power consumption drives. www.startech.com 1 800 265 1844 Certifications, Reports Applications and Compatibility • Create a fast, ultra portable external storage solution for laptops or netbooks • Add-on storage to almost any USB enabled system • Backup data to an external storage device • Retrieve data from old laptop drive, or turn the unused drive into additional external storage space Features • Screwless drive installation and assembly • Powered directly from the USB port • High Speed USB 2.0 compliant host interface, with support for transfer rates up to 480 Mbps • Compatible with SATA revision 1/2/3 (1.5/3.0/6.0 Gbps) drives • Supports 2.5" form factor hard drives (HDD) and solid state drives (SSD) up
    [Show full text]
  • Drivestation™ Ultra Series PERFORMANCE MATTERS HD-D/R6, HD-HN/R6
    DriveStation™ Ultra Series PERFORMANCE MATTERS HD-D/R6, HD-HN/R6 BLAZING FAST SPEEDS & LARGEST CAPACITY DESKTOP DAS IN THE INDUSTRY Bualo's DriveStationTM Ultra is a high performance, high capacity direct attached storage solution ideal for businesses that demand fast data transfer speeds for large les, such as 4k high resolution video. The DriveStation Ultra is available in either a ten-drive or six-drive desktop model, with capacities ranging from 12 TB to 80 TB, the largest capacity desktop DAS available today. With multi-interface support, Mac® users can experience blazing fast speeds using a Thunderbolt 2 connector, while PC users can also connect through high-speed USB 3.0 and eSATA interfaces. RAID 6 support provides extra protection that allows up to two hard drives to fail without data loss. The DriveStation Ultra is equipped with either enterprise or NAS hard drives designed for continuous operation. Extremely fast data transfers for both Mac and PCs and safe data storage with RAID options make the DriveStation Ultra an ideal solution for storing large les quickly and safely. FEATURES THUNDERBOLT 2 SPEEDS HIGH PERFORMANCE HARD DRIVES The DriveStation Ultra comes equipped with two The DriveStation Ultra features 10 helium-lled enterprise Thunderbolt 2 connectors, allowing Mac users to experience hard drives for the 80 TB model, and 6 or 10 NAS hard drives write speeds up to 1243 MB/s using RAID 0. With the fastest for the 12 TB, 24 TB & 40 TB models. These high performance connection available, it’s an ideal solution for transferring hard drives are optimized for continuous 24/7/365 operation and storing large les such as 4k high resolution videos.
    [Show full text]
  • 2-Port Esata 3Gbps Expresscard/34
    GPS702e3 2-Port eSATA 3Gbps ExpressCard/34 Ultra-fast SATA is 6 times faster* speed than that of Hi-Speed USB 2.0 and FireWire 400 The IOGEAR eSATA 3Gbps Dual Port ExpressCard/34 adds 2 eSATA ports to your laptop computer. It is great for users who want to add SATA connectivity to their laptops but do not want to buy a whole new laptop. Devices commonly used with eSATA ExpressCard/34 adapters are next generation hard drives, DVD drives such as Blu-ray optical drives, HD-DVD drives and personal media drives. The slim, portable design fits easily into a laptop bag or backpack. With support for hard disk hot-plugging, this eSATA adapter provides a convenient way to add high-speed, high-capacity hard disk drives to your laptop. It works in any available ExpressCard slot and supports data transfer rates up to 3.0 Gbps. This 2-port eSATA ExpressCard adapter offers independent command fetch, scatter/gather, and command execution features. In addition, it also supports 48-bit LBA for drives with capacity larger than 137 GB. ExpressCards, the brand new standard designed to replace CardBus, effectively quadruples the amount of available computing bandwidth. This results in faster music downloads, smoother streaming video, and lightning-fast access to mass-storage devices. *Performance derived from standard specifications. Actual performance may vary and depends on many conditions and variables, including PC performance, file size, and other settings. For more IOGEAR SATA product ideas, see reference chart below. IOGEAR SATA Cards Reference Chart
    [Show full text]
  • Serial ATA the New Drive Interface Standard for the Desktop and Mobile PC
    Boston Tec 14/8/03 7:45 PM Page 1 Technology Paper Serial ATA The new drive interface standard for the desktop and mobile PC Table of Contents Background 2 Comparative Performance 3 The Parallel ATA Interface 4 The Serial ATA Interface 4 Features of Serial ATA 5 Implementing Serial ATA 6 Where does Serial ATA fit in the market place? 8 What is iSCSI and why is Serial ATA so well suited? 8 Boston Ltd Unit 5 Curo Park, Frogmore, St. Albans AL2 2DD Tel: +44 (0) 8707 51 59 50 Fax: +44 (0) 8707 51 59 51 e: [email protected] w: www.boston.co.uk Boston Tec 14/8/03 7:46 PM Page 2 Background The parallel ATA (AT Attachment) specification has defined the common standard storage interface for PCs since the protocol was introduced back in the 1980’s. Parallel ATA has maintained its success for many years for three primary reasons: 1) Low Cost, 2) virtually universal operating system support, and 3) the ability to evolve to higher speeds and performance whilst maintaining backwards compatibility with older parallel ATA devices. From its original interface speed of just 3MB/s, parallel ATA has moved up to burst transfer rates of 66MB/s and 100MB/s and beyond. The latest generation of the parallel ATA interface, Ultra ATA-133, goes even further with a burst transfer rate of up to 133MB/s. While parallel ATA has enjoyed an illustrious track record, the specification is now showing its age. Parallel ATA imposes some serious design issues on today’s developers, including a 5 volt signaling requirement, high pin count, major cabling headaches and, perhaps most significantly, limited performance headroom.
    [Show full text]
  • Serial Attached SCSI (SAS) Interface Manual
    Users Guide Serial Attached SCSI (SAS) Interface Manual Users Guide Serial Attached SCSI (SAS) Interface Manual ©2003, 2004, 2005, 2006 Seagate Technology LLC All rights reserved Publication number: 100293071, Rev. B May 2006 Seagate, Seagate Technology, and the Seagate logo are registered trademarks of Seagate Technology LLC. SeaTools, SeaFAX, SeaFONE, SeaBOARD, and SeaTDD are either registered trademarks or trade- marks of Seagate Technology LLC. Other product names are registered trademarks or trademarks of their owners. Seagate reserves the right to change, without notice, product offerings or specifications. No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC. Revision status summary sheet Revision Date Writers/Engineers Notes Rev. A 11/11/04 J. Coomes Initial release. Rev. B 05/07/06 C. Chalupa, J. Coomes, G. Houlder All. Contents 1.0 Interface requirements. 1 1.1 Acknowledgements . 1 1.2 How to use this interface manual . 1 1.2.1 Scope . 2 1.2.2 Applicable specifications . 2 1.2.3 Other references . 3 1.3 General interface description. 3 1.3.1 Introduction to Serial Attached SCSI Interface (SAS) . 3 1.3.2 The SAS interface . 3 1.3.3 Glossary . 5 1.3.4 Keywords . 16 1.4 Physical interface characteristics. 17 1.5 Bit and byte ordering . 17 2.0 General . 19 2.1 Architecture . 19 2.1.1 Architecture overview . 19 2.1.2 Physical links and phys . 19 2.1.3 Ports (narrow ports and wide ports) . 20 2.1.4 SAS devices . 21 2.1.5 Expander devices (edge expander devices and fanout expander devices) .
    [Show full text]
  • Computer Service Technician- CST Competency Requirements
    Computer Service Technician- CST Competency Requirements This Competency listing serves to identify the major knowledge, skills, and training areas which the Computer Service Technician needs in order to perform the job of servicing the hardware and the systems software for personal computers (PCs). The present CST COMPETENCIES only address operating systems for Windows current version, plus three older. Included also are general common Linux and Apple competency information, as proprietary service contracts still keep most details specific to in-house service. The Competency is written so that it can be used as a course syllabus, or the study directed towards the education of individuals, who are expected to have basic computer hardware electronics knowledge and skills. Computer Service Technicians must be knowledgeable in the following technical areas: 1.0 SAFETY PROCEDURES / HANDLING / ENVIRONMENTAL AWARENESS 1.1 Explain the need for physical safety: 1.1.1 Lifting hardware 1.1.2 Electrical shock hazard 1.1.3 Fire hazard 1.1.4 Chemical hazard 1.2 Explain the purpose for Material Safety Data Sheets (MSDS) 1.3 Summarize work area safety and efficiency 1.4 Define first aid procedures 1.5 Describe potential hazards in both in-shop and in-home environments 1.6 Describe proper recycling and disposal procedures 2.0 COMPUTER ASSEMBLY AND DISASSEMBLY 2.1 List the tools required for removal and installation of all computer system components 2.2 Describe the proper removal and installation of a CPU 2.2.1 Describe proper use of Electrostatic Discharge
    [Show full text]
  • Cray XT and Cray XE Y Y System Overview
    Crayyy XT and Cray XE System Overview Customer Documentation and Training Overview Topics • System Overview – Cabinets, Chassis, and Blades – Compute and Service Nodes – Components of a Node Opteron Processor SeaStar ASIC • Portals API Design Gemini ASIC • System Networks • Interconnection Topologies 10/18/2010 Cray Private 2 Cray XT System 10/18/2010 Cray Private 3 System Overview Y Z GigE X 10 GigE GigE SMW Fibre Channels RAID Subsystem Compute node Login node Network node Boot /Syslog/Database nodes 10/18/2010 Cray Private I/O and Metadata nodes 4 Cabinet – The cabinet contains three chassis, a blower for cooling, a power distribution unit (PDU), a control system (CRMS), and the compute and service blades (modules) – All components of the system are air cooled A blower in the bottom of the cabinet cools the blades within the cabinet • Other rack-mounted devices within the cabinet have their own internal fans for cooling – The PDU is located behind the blower in the back of the cabinet 10/18/2010 Cray Private 5 Liquid Cooled Cabinets Heat exchanger Heat exchanger (XT5-HE LC only) (LC cabinets only) 48Vdc flexible Cage 2 buses Cage 2 Cage 1 Cage 1 Cage VRMs Cage 0 Cage 0 backplane assembly Cage ID controller Interconnect 01234567 Heat exchanger network cable Cage inlet (LC cabinets only) connection air temp sensor Airflow Heat exchanger (slot 3 rail) conditioner 48Vdc shelf 3 (XT5-HE LC only) 48Vdc shelf 2 L1 controller 48Vdc shelf 1 Blower speed controller (VFD) Blooewer PDU line filter XDP temperature XDP interface & humidity sensor
    [Show full text]
  • Comparing Fibre Channel, Serial Attached SCSI (SAS) and Serial ATA (SATA)
    Comparing Fibre Channel, Serial Attached SCSI (SAS) and Serial ATA (SATA) by Allen Hin Wing Lam Bachelor ofElectrical Engineering Carleton University 1996 PROJECT SUBMITTED IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF MASTER OF ENGINEERING In the School ofEngineering Science © Allen Hin Wing Lam 2009 SIMON FRASER UNIVERSITY Fall 2009 All rights reserved. However, in accordance with the Copyright Act ofCanada, this work may be reproduced, without authorization, under the conditions for Fair Dealing. Therefore, limited reproduction ofthis work for the purposes ofprivate study, research, criticism, review and news reporting is likely to be in accordance with the law, particularly ifcited appropriately. Approval Name: Allen Hin Wing Lam Degree: Master ofEngineering Title ofProject: Comparing Fibre Channel, Serial Attached SCSI (SAS) and Serial ATA (SATA) Examining Committee: Chair: Dr. Daniel Lee Chair ofCommittee Associate Professor, School ofEngineering Science Simon Fraser University Dr. Stephen Hardy Senior Supervisor Professor, School ofEngineering Science Simon Fraser University Jim Younger Manager, Product Engineering PMC- Sierra, Inc. Date ofDefence/Approval r 11 SIMON FRASER UNIVERSITY LIBRARY Declaration of Partial Copyright Licence The author, whose copyright is declared on the title page of this work, has granted to Simon Fraser University the right to lend this thesis, project or extended essay to users of the Simon Fraser University Library, and to make partial or single copies only for such users or in response
    [Show full text]
  • Memory Technology and Trends for High Performance Computing Contract #: MDA904-02-C-0441
    Memory Technology and Trends for High Performance Computing Contract #: MDA904-02-C-0441 Contract Institution: Georgia Institute of Technology Project Director: D. Scott Wills Project Report 12 September 2002 — 11 September 2004 This project explored the impact of developing memory technologies on future supercomputers. This activity included both a literature study (see attached whitepaper), plus a more practical exploration of potential memory interfacing techniques using the sponsor recommended HyperTransport interface. The report indicates trends that will affect interconnection network design in future supercomputers. Related publications during the contract period include: 1. P. G. Sassone and D. S. Wills, On the Scaling of the Atlas Chip-Scale Multiprocessor, to appear in IEEE Transaction on Computers. 2. P. G. Sassone and D. S. Wills, Dynamic Strands: Collapsing Speculative Dependence Chains for Reducing Pipeline Communication, to appear in IEEE/ACM International Symposium on Microarchitecture, Portland, OR, December 2004. 3. B. A. Small, A. Shacham, K. Bergman, K. Athikulwongse, C. Hawkins, and D. S. Wills, Emulation of Realistic Network Traffic Patterns on an Eight-Node Data Vortex Interconnection Network Subsystem, to appear in OSA Journal of Optical Networking. 4. P. G. Sassone and D. S. Wills, On the Extraction and Analysis of Prevalent Dataflow Patterns, to appear in The IEEE 7th Annual Workshop on Workload Characterization (WWC-7), 8 pages, Austin, TX, October 2004. 5. H. Kim, D. S. Wills, and L. M. Wills, Empirical Analysis of Operand Usage and Transport in Multimedia Applications, in Proceedings of the 4th IEEE International Workshop on System-on-Chip for Real-Time Applications(IWSOC'04), pages 168-171, Banff, Alberta, Canada, July 2004.
    [Show full text]