Drivestation™ Ultra Series PERFORMANCE MATTERS HD-D/R6, HD-HN/R6
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
SAS Enters the Mainstream Although Adoption of Serial Attached SCSI
SAS enters the mainstream By the InfoStor staff http://www.infostor.com/articles/article_display.cfm?Section=ARTCL&C=Newst&ARTICLE_ID=295373&KEYWORDS=Adaptec&p=23 Although adoption of Serial Attached SCSI (SAS) is still in the infancy stages, the next 12 months bode well for proponents of the relatively new disk drive/array interface. For example, in a recent InfoStor QuickVote reader poll, 27% of the respondents said SAS will account for the majority of their disk drive purchases over the next year, although Serial ATA (SATA) topped the list with 37% of the respondents, followed by Fibre Channel with 32%. Only 4% of the poll respondents cited the aging parallel SCSI interface (see figure). However, surveys of InfoStor’s readers are skewed by the fact that almost half of our readers are in the channel (primarily VARs and systems/storage integrators), and the channel moves faster than end users in terms of adopting (or at least kicking the tires on) new technologies such as serial interfaces. Click here to enlarge image To get a more accurate view of the pace of adoption of serial interfaces such as SAS, consider market research predictions from firms such as Gartner and International Data Corp. (IDC). Yet even in those firms’ predictions, SAS is coming on surprisingly strong, mostly at the expense of its parallel SCSI predecessor. For example, Gartner predicts SAS disk drives will account for 16.4% of all multi-user drive shipments this year and will garner almost 45% of the overall market in 2009 (see figure on p. 18). -
Multiport M.2 NGFF PS/2 HDMI Firewire Network SATA IDE Mini
Connection-Know-How www.delock.com RF Memory SATA Displayport Graphics / Video radio frequency technology Cards SATA SATA male female Dualport HDMI + Displayport Cinch Video Cinch Video Cfast female female male female N plug F plug eSATA SATA male female S-Video female Compact Flash female Sub-D Displayport Displayport male female eSATAp eSATAp TNC Coaxial NEW male female Scart male plug plug Serial Serial mini mini 9 pin 9 pin Displayport Displayport Contact Golden Strip male female male female eSATApd male SD SD 4.0 DMS male DMS female female female RP-TNC RP-TNC UHS-I-Card UHS-II-Card plug jack Slim SATA 13 pin male Null Modem 8 pin male HDMI VGA Micro SATA 16 pin VGA Parallel 25 pin male female M.2 NGFF male male HDMI A HDMI A FME FME male female plug jack M.2 NGFF Key B+M Micro SATA 16 pin female Parallel 25 pin female VHDCI-68 male HDMI HDMI mini-C mini-C M.2 NGFF Key B male female SATA 22 pin male BNC BNC Sub-D 15 pin Gameport VHDCI-68 female plug jack male M.2 NGFF Key M SATA 22 pin female HDMI HDMI micro-D micro-D male female Sub-D 15 pin Gameport SMA SMA female LFH 60 male plug jack mini PCIe SAS male Multiport Sub-D 37 pin male PS/2 miniPCIe female mSATA female RP-SMA RP-SMA NEU plug jack BNC Stecker miniPCIe male mSATA male Sub-D 37 pin female Multiport female BNC Buchse PS/2 female SMB SMB plug jack Audio USB Mobile DVI FireWire MCX MCX plug jack Audio Stereo iPhone 30 pin female DVI-D Dual Link 24+1 USB 2.0 A USB 2.0 A FireWire A FireWire A female male male female 6 pin 6 pin male female UHF UHF Stereo 3 pin Stereo 3 pin -
M.2 2280 Sata Ssd
Product Datasheet Version 1 M.2 2280 SATA SSD Product Name: I M 2 S 3 3 3 8 Capacity: 6 4 G B 、 1 2 8 GB、 2 5 6 G B 、 5 1 2 G B 、 1 T B I Revision History Revision Date Description Editor 0 May.7. 2019 Initial release Terry Chu 1 Oct. 18. 2019 Change to IA format Steven Wang 2 Apr. 24. 2020 Add DWPD Austin Lee II Table of Contents 1.0 General Description ........................................................................................................................... 2 2.0 Mechanical Specification ................................................................................................................. 3 2.1 Physical dimensions and Weight ........................................................................................... 3 2.2 Product Dimensions .................................................................................................................. 3 3.0 Product Specification ........................................................................................................................ 5 3.1 Interface and configuration ..................................................................................................... 5 3.2 Capacity ........................................................................................................................................ 5 3.3 Performance ................................................................................................................................ 5 3.4 Electrical ...................................................................................................................................... -
Thunderbolt™-To- 8Gb/S Fibre Channel Desklink™ Device Thunderlink™ FC 1082
Tech Sheet Thunderbolt™-to- 8Gb/s Fibre Channel Desklink™ Device ThunderLink™ FC 1082 ATTO’s 8Gb/s Fibre Channel to Thunderbolt Desklink Technical Features Device product provides the highest performing SAN • Dual 8Gb/s Fibre Channel Ports storage connectivity for content creation, streaming • (2) Optical SFPs+ included media and high performance and low latency workflows. • Dual 10Gbps Thunderbolt with Display Industry Proven Technology Port and PCIe Support ATTO has over 25 years of experience developing first-to-market high performance and • Thunderbolt certified for Mac and PC reliable storage connectivity solutions for customers. ATTO ThunderLink Fibre Channel products now provide creative professionals using Thunderbolt-enabled hosts, cost • Dual ports enable daisy-chaining up effective access to storage not previously available using FireWire or USB. The integrated to six devices family of ThunderLink products boasts an extensive list of customer design wins and • Exclusive Advanced Data Streaming certifications with respected industry partners. (ADS™) Technology Flexible Connectivity Solutions • ATTO ConfigTool for customized performance settings With dual channel configuration, and support for load balancing and failover, the 8Gb/s Fibre Channel Desklink Devices are an ideal solution for users looking to achieve the highest • Proven interoperable with leading I/O and data throughput for advanced video and access to IT applications. ThunderLink storage hardware and software 8Gb/s Fibre Channel Desklink Devices offer driver support for Mac OS® X 10.6.8 and later vendors and Windows® 7 and 8.1 (Linux® when Thunderbolt enabled platforms become available), • Complete SAN connectivity when providing a single connectivity solution for customers with heterogeneous operating combined with ATTO FibreConnect system environments. -
2.5In USB 2.0 One Button Backup SATA External Hard Drive Enclosure
2.5in USB 2.0 One Button Backup SATA External Hard Drive Enclosure Product ID: SAT2510BU2B This 2.5in External SATA Hard Drive Enclosure connects to a host computer through USB 2.0, allowing you to turn any standard 2.5in Serial ATA hard drive (SATA, SATA II, SATA III) into a highly portable storage solution. Large capacity drives (tested with up to 1TB) can be used to greatly enhance your computer's storage/backup capabilities. The SATA hard drive enclosure offers One Button Backup, allowing you to automate backups of data from the host computer to the external hard drive at the touch of a button. The external hard drive enclosure features a slim, lightweight design as well as an attractive black metal casing. The USB/SATA enclosure also includes a USB Y-cable that can be used to ensure sufficient power for higher capacity/higher power consumption drives. www.startech.com 1 800 265 1844 Certifications, Reports Applications and Compatibility • Create a fast, ultra portable external storage solution for laptops or netbooks • Add-on storage to almost any USB enabled system • Backup data to an external storage device • Retrieve data from old laptop drive, or turn the unused drive into additional external storage space Features • Screwless drive installation and assembly • Powered directly from the USB port • High Speed USB 2.0 compliant host interface, with support for transfer rates up to 480 Mbps • Compatible with SATA revision 1/2/3 (1.5/3.0/6.0 Gbps) drives • Supports 2.5" form factor hard drives (HDD) and solid state drives (SSD) up -
2-Port Esata 3Gbps Expresscard/34
GPS702e3 2-Port eSATA 3Gbps ExpressCard/34 Ultra-fast SATA is 6 times faster* speed than that of Hi-Speed USB 2.0 and FireWire 400 The IOGEAR eSATA 3Gbps Dual Port ExpressCard/34 adds 2 eSATA ports to your laptop computer. It is great for users who want to add SATA connectivity to their laptops but do not want to buy a whole new laptop. Devices commonly used with eSATA ExpressCard/34 adapters are next generation hard drives, DVD drives such as Blu-ray optical drives, HD-DVD drives and personal media drives. The slim, portable design fits easily into a laptop bag or backpack. With support for hard disk hot-plugging, this eSATA adapter provides a convenient way to add high-speed, high-capacity hard disk drives to your laptop. It works in any available ExpressCard slot and supports data transfer rates up to 3.0 Gbps. This 2-port eSATA ExpressCard adapter offers independent command fetch, scatter/gather, and command execution features. In addition, it also supports 48-bit LBA for drives with capacity larger than 137 GB. ExpressCards, the brand new standard designed to replace CardBus, effectively quadruples the amount of available computing bandwidth. This results in faster music downloads, smoother streaming video, and lightning-fast access to mass-storage devices. *Performance derived from standard specifications. Actual performance may vary and depends on many conditions and variables, including PC performance, file size, and other settings. For more IOGEAR SATA product ideas, see reference chart below. IOGEAR SATA Cards Reference Chart -
HP Z440, Z640, and Z840 Workstation Series Maintenance and Service Guide
HP Z440, Z640, and Z840 Workstation Series Maintenance and Service Guide Copyright Information Warranty Trademark Credits © Copyright 2014, 2016 HP Development The information contained herein is subject to Microsoft and Windows are U.S. registered Company, L.P. change without notice. The only warranties for trademarks of the Microsoft group of HP products and services are set forth in the companies. Third Edition: November 2016 express warranty statements accompanying such products and services. Nothing herein Intel, Intel Xeon, and Thunderbolt are First Edition: October 2014 should be construed as constituting an trademarks of Intel Corporation in the U.S. and other countries. Part Number: 748721-004 additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Windows 8: Not all features are available in all Company under license. editions of Windows 8. This workstation may require upgraded and/or separately purchased ENERGY STAR is a registered trademark owned hardware, drivers, and/or software to take full by the U.S. Environmental Protection Agency advantage of Windows 8 functionality. Go to (EPA). http://www.microsoft.com for details. Red Hat is a registered trademark of Red Hat, Windows 7: This workstation may require Inc. in the United States and other countries. upgraded and/or separately purchased hardware and/or a DVD drive to install the Windows 7 software and take full advantage of Windows 7 functionality. Go to http://www.microsoft.com for details. About this guide This guide provides service and maintenance information, technical details and configuration guidance for the HP Z440, Z640, and Z840 Workstations. -
Apogee Ensemble Thunderbolt Audio Interface
Apogee Ensemble Thunderbolt Audio Interface User’s Guide Fall 2014 Contents Overview!...........................................................................................................5 Introduction!................................................................................................................5 Features!.......................................................................................................................5 Package Contents!......................................................................................................6 Ensemble Thunderbolt Panel Tour!...........................................................................7 Front Panel!.................................................................................................................7 Rear Panel!..................................................................................................................8 Display!........................................................................................................................9 Input Settings Display Screen!..................................................................................9 Getting Started!...............................................................................................10 Precautions when powering Ensemble On/Off!......................................................10 Thunderbolt Notes!....................................................................................................10 Ensemble Software!..................................................................................................11 -
Serial ATA the New Drive Interface Standard for the Desktop and Mobile PC
Boston Tec 14/8/03 7:45 PM Page 1 Technology Paper Serial ATA The new drive interface standard for the desktop and mobile PC Table of Contents Background 2 Comparative Performance 3 The Parallel ATA Interface 4 The Serial ATA Interface 4 Features of Serial ATA 5 Implementing Serial ATA 6 Where does Serial ATA fit in the market place? 8 What is iSCSI and why is Serial ATA so well suited? 8 Boston Ltd Unit 5 Curo Park, Frogmore, St. Albans AL2 2DD Tel: +44 (0) 8707 51 59 50 Fax: +44 (0) 8707 51 59 51 e: [email protected] w: www.boston.co.uk Boston Tec 14/8/03 7:46 PM Page 2 Background The parallel ATA (AT Attachment) specification has defined the common standard storage interface for PCs since the protocol was introduced back in the 1980’s. Parallel ATA has maintained its success for many years for three primary reasons: 1) Low Cost, 2) virtually universal operating system support, and 3) the ability to evolve to higher speeds and performance whilst maintaining backwards compatibility with older parallel ATA devices. From its original interface speed of just 3MB/s, parallel ATA has moved up to burst transfer rates of 66MB/s and 100MB/s and beyond. The latest generation of the parallel ATA interface, Ultra ATA-133, goes even further with a burst transfer rate of up to 133MB/s. While parallel ATA has enjoyed an illustrious track record, the specification is now showing its age. Parallel ATA imposes some serious design issues on today’s developers, including a 5 volt signaling requirement, high pin count, major cabling headaches and, perhaps most significantly, limited performance headroom. -
Serial Attached SCSI (SAS) Interface Manual
Users Guide Serial Attached SCSI (SAS) Interface Manual Users Guide Serial Attached SCSI (SAS) Interface Manual ©2003, 2004, 2005, 2006 Seagate Technology LLC All rights reserved Publication number: 100293071, Rev. B May 2006 Seagate, Seagate Technology, and the Seagate logo are registered trademarks of Seagate Technology LLC. SeaTools, SeaFAX, SeaFONE, SeaBOARD, and SeaTDD are either registered trademarks or trade- marks of Seagate Technology LLC. Other product names are registered trademarks or trademarks of their owners. Seagate reserves the right to change, without notice, product offerings or specifications. No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC. Revision status summary sheet Revision Date Writers/Engineers Notes Rev. A 11/11/04 J. Coomes Initial release. Rev. B 05/07/06 C. Chalupa, J. Coomes, G. Houlder All. Contents 1.0 Interface requirements. 1 1.1 Acknowledgements . 1 1.2 How to use this interface manual . 1 1.2.1 Scope . 2 1.2.2 Applicable specifications . 2 1.2.3 Other references . 3 1.3 General interface description. 3 1.3.1 Introduction to Serial Attached SCSI Interface (SAS) . 3 1.3.2 The SAS interface . 3 1.3.3 Glossary . 5 1.3.4 Keywords . 16 1.4 Physical interface characteristics. 17 1.5 Bit and byte ordering . 17 2.0 General . 19 2.1 Architecture . 19 2.1.1 Architecture overview . 19 2.1.2 Physical links and phys . 19 2.1.3 Ports (narrow ports and wide ports) . 20 2.1.4 SAS devices . 21 2.1.5 Expander devices (edge expander devices and fanout expander devices) . -
Comparing Fibre Channel, Serial Attached SCSI (SAS) and Serial ATA (SATA)
Comparing Fibre Channel, Serial Attached SCSI (SAS) and Serial ATA (SATA) by Allen Hin Wing Lam Bachelor ofElectrical Engineering Carleton University 1996 PROJECT SUBMITTED IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF MASTER OF ENGINEERING In the School ofEngineering Science © Allen Hin Wing Lam 2009 SIMON FRASER UNIVERSITY Fall 2009 All rights reserved. However, in accordance with the Copyright Act ofCanada, this work may be reproduced, without authorization, under the conditions for Fair Dealing. Therefore, limited reproduction ofthis work for the purposes ofprivate study, research, criticism, review and news reporting is likely to be in accordance with the law, particularly ifcited appropriately. Approval Name: Allen Hin Wing Lam Degree: Master ofEngineering Title ofProject: Comparing Fibre Channel, Serial Attached SCSI (SAS) and Serial ATA (SATA) Examining Committee: Chair: Dr. Daniel Lee Chair ofCommittee Associate Professor, School ofEngineering Science Simon Fraser University Dr. Stephen Hardy Senior Supervisor Professor, School ofEngineering Science Simon Fraser University Jim Younger Manager, Product Engineering PMC- Sierra, Inc. Date ofDefence/Approval r 11 SIMON FRASER UNIVERSITY LIBRARY Declaration of Partial Copyright Licence The author, whose copyright is declared on the title page of this work, has granted to Simon Fraser University the right to lend this thesis, project or extended essay to users of the Simon Fraser University Library, and to make partial or single copies only for such users or in response -
SATA Express
1-512-256-0197 www.mindshare.com [email protected] SATA Express Let MindShare Bring “SATA Express” to Life for You MindShare brings the SATA Express course to life through its interactive classroom style and demonstrations. SATA Express bus interface supports both Serial ATA (SATA) and PCI Express (PCIe) storage devices, initially standardized in the SATA 3.2 specification. The SATA Express connector used on the host side is backward compatible with the standard SATA data connector. It also provides multiple PCI Express lanes as a pure PCI Express connection to the storage device. Three options are available for connection of storage devices, 1) Legacy SATA, 2) SATA Express using AHCI, 3) SATA Express using NVMe. This course assumes the student is familiar with both SATA and PCI Express protocol. The course focuses on connector and cable architecture as well as M.2 Device architecture. The course then covers the architecture of both AHCI and NVMe host controllers associated with SATA and PCIe connected storage devices. You Will Learn: • SATA Express connector and cable structure • M.2 devices and sockets/cards • Pertinent AHCI controller and commands • Pertinent NVMe controller and commands • Interrupt handling • Error handling • Power management Course Length: 2 Days Who Should Attend? Hardware designers, software developers, and system validation engineers will all benefit from this course. Both hardware and software requirements of a SATA Express subsystem are detailed and explained through numerous examples. Course Contents: