DOCSLIB.ORG

Download Allen Brochure (8.31

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Download Allen Brochure (8.31 Performance Hardware 2011-12 DESIGNED FOR SAILING BLOCKS 7 RUDDER ACCESSORIES 49 Spinnaker pole end 75 20mm dynamic block 9 Rudder pintels & gudgeons 51 Spinnaker pole mast brackets 75 30mm dynamic block 11 Tiller extension universal joints 52 Spinnaker pole tube 75 40mm dynamic block 13 Tiller extension 52 Spreader hardware 69 60mm dynamic block 15 Tiller extension - carbon 52 Stay adjusters 63 40mm ezi-ratchet 16 Transom pintles & gudgeons 53 Swaged stud 71 52mm ezi-ratchet 16 SAIL HARDWARE 55 ‘T’ terminal 71 40mm switchable ratchet 17 Batten hardware 56 Thimbles - plastic 77 60mm switchable ratchet 17 Jib hanks 56 Thimbles - stainless steel 77 High tension blocks 18 Sail headboards 57 ACCESSORIES 79 Lightweight plain bearing 22 Sail ring 57 Ball stoppers 82 Plain bearing blocks 20 Sail shackles 57 Burgees 82 Plain bearing reinforced blocks 21 Nylon sail slides 58 Drain socket and bungs 81 Snatch blocks 17 Nylon cunningham block 56 Hatch covers 80 Vang blocks 23 Batten compression adjuster 56 Hooks 83 Springs - stainless steel 23 SPARS AND RIGGING ACCESSORIES 61 Inglefield clips 84 CLEATS 25 Boom slides 68 Rowlocks & sockets 87 Cam cleats 27 Eye bolt 70 Self bailer 81 Cam cleat accessories 27 Eye terminal 70 Sheaves 85 ClamcleatsR 32 Fast pin 64 Tidy clips 84 Cleat wedges 28 Fork terminal 70 Toe strap plates & buckles 86 Jam cleats 33 Furling gear & swivels 65 Trapeze equipment 86 Mainsheet jammers 30 Gooseneck fixed 66 Winch handles 87 Mast cleats 32 Gooseneck sliding 66 SHACKLES 89 Nylon open cleat 32 Halyyard exit plate 68 Round body S/S bow shackle - forged pin 93 Plain bearing jammer 30 Halyard lock & hook racks 68 Round body S/S D shackle - forged pin 93 Swivel cleats 29 Highfield levers 65 Round body S/S long D shackle - forged pin 93 V cleats 33 Mast and boom straps 66 Round body S/S twisted shackle - forged pin 93 Pump action cleat 33 Mast gates and step 69 S/S forged shackle 90 DECK HARDWARE 35 Mast tangs 69 S/S pressed shackle 90 Anchor plates 40 Mirror dinghy mast fittings 67 S/S strip bow shackle - standard pin 91 Bow & shroud plates 40 Nylon mast & tube fittings 76 S/S strip D shackle - slotted pin 91 Deck bushes 44 Plastic mast head sheave box 74 S/S strip D shackle - standard pin 92 Fairleads 45 Rigging screws 71 S/S strip shackle - key pin 92 Self tacking jib system 38 Rigging stud screw 71 S/S strip shackle - key pin with extra pin & ring 92 S/S Lacing eyes & eye straps 42 Sheave boxes 72 TRACKS 95 Sliding fairleads & sheet leads 39 Sheave boxes - high tension 72 Tracks for travellers 96 Snatch fairleads & lacing hooks 47 Sheave boxes - keelboat 73 Mast tracks 96 Welcome to the Allen Sailboat Performance Hardware catalogue... Stanchion mounted blocks 47 Sheave boxes - low profile 73 Keelbands 97 Track slides 39 Sheave boxes - plain bearing 73 Track end stops and accessories 97 Here you will find the extensive range of quality sailboat Traveller cars 37 Spinnaker pole accessoiries 74 MISCELLANEOUS 98 performance hardware manufactured at Allen Brothers’ UK factory. U bolt 41 Spinnaker pole end piston 74 INDEX 99 As a manufacturer our job is to make products that work. For the discerning racing sailor looking for the best, we have created the widest range of hardware that combines reliability, efficiency, strength, size and weight with value for money - and it looks good too! Merging tradition, functionality and protocols that have evolved throughout sailing history, with the latest modern materials and manufacturing technology. We have worked with the world’s leading Please note Design CONTACTDETAILS Allen Brothers Ltd designers and sailors to create products that have levels of Photographs and illustrations are not to Tracy Saunders Hallmark Industrial Estate performance, quality and durability that are unsurpassed. scale unless specified. Always refer to 01621 782385 Southminster technical data charts for accurate Photography Essex CM0 7EH Our philosophy is to be the best, to be honest and straightforward dimensions. If you do not see what you www.marineimages.co.uk United Kingdom are looking for please contact the technical www.fotoboat.com T +44 (0)1621 774689 with our customers, and to be open to feedback on our products. team at our head office for assistance. www.photoblink.co.uk F +44 (0)1621 773872 2 www.allenbrothers.co.uk www.allenbrothers.co.uk 3 Brothers Tony and Glenn were introduced to engineering at a young We have the capacity to produce thousands of different products, age and learnt how to design and produce parts for working model with a huge archive of tooling and the resources to fulfill the requirements steam locomotives and aeroplanes which their father Henry Allen had of the marine trade and the discerning sailor, from mass production an enthusiasm for building in the garden workshop. to custom design. During a trip with a group of friends to Burnham-on-Crouch, a In-house resources include: Design & CAD modelling - using the advanced well-known sailing centre on the East Coast of England, they saw a Pro-Engineer CAD software our design team can quickly develop new fleet of racing dinghies sail by. They were so impressed with these sleek ideas and designs into computer models, which can be structurally sailing boats that they went along to the Royal Corinthian Yacht Club assessed with our Ansys computer simulated stress analysis software. to find out more. There they met an American called Beecher Moore Prototype models can be seen within hours using our Dimension 3D who convinced them that they should build their own racing dinghy. part printer. Tool making - finished designs are seamlessly progressed They built their first Hornet in their garden shed and fitted it out with through the tool making stages using the parametric features of Pro- homemade fittings. It soon became obvious to them that the brass cam Engineer tool design and CNC machining software. Our toolmakers can cleats, which were highly prized on some of the race-winning boats, produce single or multi-impression tools for injection moulding, sheet metal were heavy and very expensive, so they decided to design and engineer pierce and blank tools, secondary operation form tools, assembly jigs and their own die-cast aluminum cam cleats. Of course, word spread of the fixtures.Component parts - our factory is equipped to manufacture a new light innovative fittings amongst the fleet of Hornets and it wasn’t diverse range of parts. We are particularly flexible in the production of short long before they were selling and bartering them amongst their friends. run specialist parts, and low to medium volume quantities. MADE IN THE UK D It was in 1956 that the Allen brothers formed their dinghy fittings CNC injection moulding - we are experts in the use of advanced Marine trade enterprise into a company and Beecher Moore persuaded them to engineering polymers and composites such as carbon fibre filled acetals customers can supply Jack Holt’s boat-building business with their innovative new and nylons. CNC turned parts - our 5 axis sliding head lathes produce now purchase products. So began the long and fruitful partnership they named high precision parts in all materials. CNC sheet metal forming - pierced Holt-Allen. Within a few years Allen Brothers had increased their and blanked parts, with secondary forming and cutting presses. direct from us. resources to include their own design of injection moulding machines, CNC milled parts – all materials. Aluminum gravity cast parts - from An efficient and metal press and punch machines and had increased their product our own in-house foundry. Fabrication - our versatile and skilled dedicated sales range to include blocks, plastic cleats, sailmakers’ hardware, stainless workforce can provide fully assembled products, using a range of team is ready to steel rigging gear and more. techniques such as welding, drilling, riveting, threaded fasteners, adhesives, pad-printing and packing. Sales and distribution - our take your orders Today, you can look at most sailing dinghies and you’ll find products dedicated sales team is ready to take your order and will endeavour and will endeavour designed and manufactured by Allen, from state-of-the-art dynamic to dispatch all stock items ordered before 3pm, on the same day. bearing block systems, to humble yet essential ball stoppers. to despatch all orders received before 3.00pm on the same day, if in stock. 4 www.allenbrothers.co.uk For a list of our worldwide distributors please see our website: www.allenbrothers.co.uk 5 BLOCKS 7 A block is a single or multiple pulley. One or more sheaves are enclosed in an assembly between cheeks. In use a block is fixed to the end of a line, to a spar, or to a surface. Rope or line is threaded through the sheaves. Some blocks have a ratchet, which means that they turn freely when you pull a line in one direction but do not turn in the other direction. This makes a line easier to hold especially on a windy day. DESIGNED FOR SAILING “Allen blocks are currently the best on the market” BLOCKS John Pink 2009 - 49er Worlds Silver medallist Dynamic bearing blocks Maximum performance from the smallest ball bearing block. Work on our range of blocks has headed the effort to find new standards of performance and construction. We invented the science behind the patented Allen dynamic bearing technology, and all our high performing blocks use this as a basis of the inner bearing system. We also invented and A2020 A2020LZ A2020TI A2020TI - LOCK A2020SC patented the Ultra-strap technology, Part Description Length Line Dia Shackle Pin Breaking Load MDL Weight a very narrow strap of high strength mm mm mm kg kg g Single 37 2.5 - 6 - 540 115 11.1 stainless steel, which can be lashed A2020 A2020LZ Single with lacing eye 41 2.5 - 6 - 520 115 15.4 without the fear of line abrasion A2020TI Ezi-Ti 45 2.5 - 6 - 540 115 7.8 Ezi-Ti with Ti- lock 45 2.5 - 6 - 540 115 7.9 associated with A2020TI - LOCK A2020SC Swivel head 49 2.5 - 6 4 350 115 15.4 blocks of traditional strap www.allenbrothers.co.uk construction.
Load more

Recommended publications
  • Performance Hardware 2011-12
    Performance Hardware 2011-12 DESIGNED FOR SAILING Welcome to the Allen Sailboat Performance Hardware catalogue... Here you will find the extensive range of quality sailboat performance hardware manufactured at Allen Brothers’ UK factory. As a manufacturer our job is to make products that work. For the discerning racing sailor looking for the best, we have created the widest range of hardware that combines reliability, efficiency, strength, size and weight with value for money - and it looks good too! Merging tradition, functionality and protocols that have evolved throughout sailing history, with the latest modern materials and manufacturing technology. We have worked with the world’s leading designers and sailors to create products that have levels of performance, quality and durability that are unsurpassed. Our philosophy is to be the best, to be honest and straightforward with our customers, and to be open to feedback on our products. 2 www.allenbrothers.co.uk BLOCKS 7 RUDDER ACCESSORIES 49 Spinnaker pole end 75 20mm dynamic block 9 Rudder pintels & gudgeons 51 Spinnaker pole mast brackets 75 30mm dynamic block 11 Tiller extension universal joints 52 Spinnaker pole tube 75 40mm dynamic block 13 Tiller extension 52 Spreader hardware 69 60mm dynamic block 15 Tiller extension - carbon 52 Stay adjusters 63 40mm ezi-ratchet 16 Transom pintles & gudgeons 53 Swaged stud 71 52mm ezi-ratchet 16 SAIL HARDWARE 55 ‘T’ terminal 71 40mm switchable ratchet 17 Batten hardware 56 Thimbles - plastic 77 60mm switchable ratchet 17 Jib hanks 56 Thimbles
    [Show full text]
  • The History of the International 14
    THE HISTORY OF THE INTERNATIONAL 14 Tommy Vaughan’s epic work documenting the development of the class from various scattered types of14 foot small boat in the 1800’s to the international race machine we know today INTRODUCTION 2 THE HISTORY OF THE INTERNATIONAL FOURTEEN 3 EARLY DAYS - PRE 1923 4 A NATIONAL CLASS, 1923 - 1928 7 THE UFFA FOX ERA, 1928-1939 8 THE YEARS OF CHALLENGE, 1946 - 1955 17 THE YEARS OF DEVELOPMENT, 1955 - 1963 22 INTERNATIONAL AFFAIRS, 1964 - 1970 29 THE YEARS OF DISCORD 1971 – 1980 37 THE YEARS OF CHANGE 1980 – 1989 41 MERGER:A GLOBAL 14 FOOT CLASS: 1990-2003 47 INTRODUCTION The story of the International Fourteen is never ending because so much continues to come to light from its past whilst, being a development class, there is always something new in hull or rig to record. Change in fact, is what Fourteening is, and always will be, about. As a concept it is not stuck in time. The class is fortunate in having a history that goes back to the very origins of racing small open boats and a future, that, within its chosen constraints, is as limitless as human endeavour and ingenuity can devise. It has been my pleasure to try and record the highlights of the International Fourteen. This is the fourth edition , first on the internet.. It is hard to believe that it is over forty years since I was first volunteered for the job. This has been the hardest version to pull together. For the simple reason that for the past few years my role has been of an interested , but distant, supporter rather than that of an enthusiastic, if indifferent, performer.
    [Show full text]
  • National Osprey
    NATIONAL OSPREY NEWSLETTER December 1977 1978 NATIONAL CHAMPIONSHIP FILEY REPORT - JOHN RAYNER PHOTOS. TIM HORE Some idea of Sunday's seas can be judged from this photo of Richard Bowen driving 'Mary Iane' up the windward leg beyond Filey Brig.QPONMLKJIHGFEDCBA North Country Breweries, blossomed moving cliff. A fair list of items to into an agreement for the Brewery to overcome for a six day programme The success of the Filey week sponsor the Championship week. Tim involving 99 helms and crews together was due primarily to three factors - is a sailing member of the nearby with families and over 60 club mem- Sponsorship by North Country Brew- Humber Yard club and regularly atten- ers resident for the week Experience eries Limited, hard work put in by the ded the frequent and lengthy meetings of the 1971 championship was inval- organising committee together with as well as offering considerable help uable and with areas of the dinghy club members and good weather, with pre-championship publicity and park cleared for the bar marquee, printing. plenty of brollies, tables, chairs, a Any club running a champion- magnificent view of the bay and ade- ship has financial commitments at an Many visitors may have been quate quantities of North Country early date and everyone was delighted surprised at the primitive clubhouse beer, all that remained was for the when the contact between committee facilities - no electricity, no gas, no weather to play ijs part. member - John Gilpin - and Tim road access, no bar and the clubhouse Cartwright- Taylor, Sales Director for situated 50 ft.
    [Show full text]
  • Newsletter 90
    Old Kins?'sClub CCF INSPECTJON MAY 1997 Wimbledon Centenary Newsletter No. 90 July 1997 EDITORIAL This academic year, momen tous in the history of King 's, has now reached its end, with the Centenary of the School's move to Wimbledon well and truly celebrat ed. In our supplement, publish ed in March, we told the story of the move, and included some personal reminiscences of the early years at Wimbledon . In this issue, as well as our usual features, we have a report of the OKC Centenary-of-the-M ove dinner. More personal memor ies of the past century are also included ; one from fifty years ago, of war-time harvest camps, and one from twenty years ago from an honorary life member and former master. A report of the School celebrations of the Centenary is held over to the next issue, when the events can be fully reviewed. Momentous in another way, this has been the last year of the Head Mastership of Robin Reeve, who retired at the end of the year. Our next issue will contain an appreciat ion of the seventeen years of his term as Head Master, as well as a profile of his successo r, Anthony Evans. In the mean time, we wish Robin, and his wife Brienne, a long and happy retirement. Anniversaries are also a time for looking forward. The Old King's Club Committee has been giving a good deal of thought recently to possible future activities which would interest Club membe rs. In addition to the sporting events that we have held for many years, the possibility of activities for other interest groups has been discussed, for example in music, computer programming, bridge playing, or whatever other diverse interests our members may have.
    [Show full text]
  • Performance Hardware 2009/10
    Performance Hardware 2009/10 www.allenbrothers.co.uk Sailing faster…. Welcome to the Allen Sailboat Performance Hardware catalogue... Here you will find the extensive range of quality sailboat performance hardware manufactured at the Allen Brothers UK factory. Our job as a manufacturer is to make products that work, and for the discerning racing sailor looking for the best, we have created the widest range of hardware that combines reliability, efficiency, strength, size and weight with value for money. And it looks good too! Merging tradition, functionality and protocols that have evolved throughout sailing history, with the opportunities allowed by the use of the latest modern materials, design and manufacturing technology, we have worked with the world’s leading designers and sailors to create products that have unsurpassed performance, quality and durability. Our philosophy is to be the best, to be honest and straightforward to our customers, and to be open to feedback on our products. CONTENTS ACCESSORIES RUDDER ACCESSORIES Ball Stoppers 40 Rudder Pintels & Gudgeons 26 Burgees 40 Rudder Retaining Clips 27 Drain socket and bungs 41 Tiller extension universal joints 27 Hatch covers 41 Tiller extension 25 Hooks 42 Tiller extension - carbon 25 Inglefield clips 42 Transom Pintles & Gudgeons 27 Keelbands 42 SAIL HARDWARE Rowlocks & Sockets 43 Batten Hardware 28 Self bailer 43 Jib Hanks 28 Shackles Sail Headboards 28 Round Body S/S Bow Shackle - forged pin 45 Sail Ring 28 Round Body S/S D Shackle - forged pin 45 Sail Shackles 29 Round Body
    [Show full text]
  • The Sandbag 10/30/10
    The Sandbag DAVE McCOMB A guide to selecting and enjoying the International Tempest Class sailboat In memory of Ian Proctor, who created a wonderful boat in 1965 and recreated it in 1990. II PREFACE Many people contributed generously of their time in helping prepare this book. I am particularly indebted to Don Cooper for his fine artwork, which was the basis for the computer- generated drawings in this edition. Also to Bruce Kirby for his design perspective in the foreword to the first edition, a fine tribute from one journalist-designer to another. Several others were good contributors precisely because they were not familiar with the Tempest. Rob MacArthur and Homer Hagedorn provided editorial help and questioned many points they found unclear, which led to the development of the glossary. Tempest owners also provided input and encouragement. Dick Bleier, Dave Duke, Wally Respess, Malcolm Lawson, Ed Hoyt and Jim O’Hara were particularly helpful. I extend my deep appreciation to these people and the many others who offered their encouragement and assistance. Copyright 1986, 1987, 1992 and 1996 by David W. McComb III INTRODUCTION I discovered the Tempest in the late 60s through a photograph. I’d never before seen grace and power so well combined in a one-design sailboat. And, I found when I first sailed one, it has more than just good looks: • It’s comfortable. The flat cockpit floor makes boat-handling a dream, and there’s no bruising centerboard trunk. • It’s fast. It has finished first or second among keelboats at all four Yachting One-of-a-Kind regattas it has attended, and has dominated in heavy weather.
    [Show full text]
  • A4 Holt Performance
    PERFORMANCE CATALOGUE www.holt.eu 2009 COMPANY PROFILE DESIGNING Holt has been a leading pioneer in sailboat hardware for over 60 years. Inspired design and innovation has led to the Holt range breaking the mould of conventional deck hardware and creating some of the highest performance OUR FUTURE equipment available. The next generation of Holt Performance Hardware sets a With so many keen, championship-winning sailors working for Holt, the feedback on products and ideas is constant. new standard in design and engineering excellence Its internal research, combined with information provided by Team Holt sponsored sailors, gives the company a real insight in to the way the sport will develop and performance further increased. The Team Holt programme has allowed the company to amass a wealth of knowledge and many great ideas for future product developments. "We have a great team! Our designers have developed a good feel for the type of products sailors want. This combined with our sales team whose considerable product knowledge comes from their active participation in the sport (some times a little too active in the summer months!) puts us in a unique position to be able to develop our product range in such a hands on manner." Chadwick Beecher Moore, Managing Director Please note Photographs and illustrations are not to scale unless specified. Always refer to technical data charts for accurate di- mensions. If you do not see what you are looking for please contact the tech- CONTACT nical team at head office for assistance. Warranty Holt warrants its products in normal usage to be free of defects in materials US and workmanship for a period of three Disclaimer Holt This catalogue has been produced years from date of purchase by the orig- Embankment with information correct at time of inal purchaser, subject to our published London print.
    [Show full text]
  • SAILING HYDROFOILS the AMATEUR YACHT RESEARCH SOCIETY (Founded June, 1955 to Encourage Amateur and Individual Yacht Research)
    SAILING HYDROFOILS THE AMATEUR YACHT RESEARCH SOCIETY (Founded June, 1955 to encourage Amateur and Individual Yacht Research) Patron: HIS ROYAL HIGHNESS THE PRINCE PHILIP, DUKE OF EDINBURGH, K.G., P.C., K.T., G.B.E., F.R.S. Presidents: British: The Rt. Hon, Lord Riverdale, D.L., J.P. New Zealand: R. L. Stewart Vice-Presidents: British: American: Austin Farrar, M.R.I.N.A. Great Lakes: William R. Mehaffey Beecher Moore California: Joseph J. Szakacs Sir Peregrine Henniker-Heaton, Bt. British Committee: Chairman: Sir Perry Henniker-Heaton, Bt. Vice-Chairman: Andre Kanssen {Hon. Sec), Bill Poole Dennis Banham, W/Cdr. Jock Burrough, D.F.C, Michael Butterfield, Tom Herbert, S. A. Coleman-Malden, Michael Ellison, Pat Morwood, Eric Thorne-Symmons, Gp/Cpt. M. D. Thunder, F.O.O.S. National Organisers: American: W. Dorwin Teague, 375 Sylvan Ave., Englewood Cliffs, New Jersey 07632. AustraUan: Ray Dooris, 29 Clarence St., Macquarie Fields, Sydney, N.S.W. British: Michael Ellison, Hermitage, Newbury, Bucks. Canadian: P. J. McGrath, 43 Thornecliffe Park Drive, Apartment 706. Toronto, 17, Ontario. French: Pierre Gutelle, 3 Rue Jules Simon, 75 Paris (15»). New Zealand: T. L. Lane, 32 Michaels Ave., Auckland, S.E.6. South African: Brian Lello, S.A. Yachting, 58 Burg St., Cape Town. Sweden: Sveriges Catamaran Seglare, Mistelvagen 4, Lidingo. Area Organisers: Dennis Banham, Highlands, Blackstone, Redhill, Surrey. A. T. Brooke, 75 Craiglockhart Rd., Edinburgh 11. Fred Benyon-Tinker, 49 Pillar Gardens, Northfield Lane, Brixham, Devon. M. Garnet, 7 Reynolds Walk, Horfield, Bristol. John R. Novak. 23100 Vanowen St., Canoga Park, California. Editorial Sub-Committee: Michael Henderson, John Hogg.
    [Show full text]