001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:58 Pagina 1

Dear Customer, Thank you for choosing and congratulations on your choice of a QUBO. We have prepared this booklet to enable you to know each detail of your Fiat Fiorino QUBO and use it correctly. Please, read it carefully before driving your vehicle for the first time. You will find information, tips and important warnings regarding the driving of your vehicle to help you derive the maximum from the technological features of your Fiat Fiorino QUBO. You are recommended to carefully read the warnings and indications, marked with the respective symbols:

personal safety;

vehicle integrity;

environmental protection.

The enclosed Warranty Booklet lists the services that Fiat offers to its Customers: ❒ the Warranty Certificate with terms and conditions for maintaining its validity ❒ the range of additional services available to Fiat Customers. Best regards and happy motoring!

This Owner Handbook describes all the versions of the Fiat Fiorino QUBO. As a consequence, you should only consider the information which is related to the engine and bodywork version of the vehicle you have purchased. 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:58 Pagina 2

MUST BE READ!

REFUELLING Petrol engines: only refuel with unleaded petrol with octane rating (RON) not less than 95 conforming to the European specification EN 228. K Diesel engines: only refuel with conforming to the European specification EN590. The use of other prod- ucts or mixtures may damage the engine beyond repair and consequently cause lapse of warranty in relation to the damage caused.

ENGINE STARTING Petrol engines: make sure that the handbrake is engaged; set the gearshift lever to neutral; fully depress the clutch without pressing the accelerator, then turn the ignition key to AVV and release it as soon as the engine has started. Diesel engines: Turn the ignition key to MAR and wait for the warning light m to go out. Turn the ignition key to AVV and release as soon as the engine starts.

PARKING ON FLAMMABLE MATERIAL The catalytic converter develops high temperature during operation. Do not park on grass, dry leaves, pine needles ┮ or other flammable material: fire risk.

RESPECTING THE ENVIRONMENT The vehicle is fitted with a system that allows continuous diagnosis of the components correlated with emissions to ensure better respect for the environment. 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:58 Pagina 3

ELECTRICAL ACCESSORIES If, after buying the vehicle, you decide to add electrical accessories (with the risk of gradually draining the battery), visit a Fiat Dealership. They can calculate the overall electrical requirement and check that the vehicle electric sys- tem can support the required load. ▵

SCHEDULED SERVICING Correct vehicle servicing is essential for ensuring it stays in tip-top condition and safeguards its safety features, its environmental friendliness and low running costs for a long time to come.

THE OWNER’S MANUAL CONTAINS… ... important information, advise and warnings for correct use, driving safety and maintenance of your vehicle over time. Pay special attention to the symbols " (personal safety) # (environmental protection) (vehicle integri- ty). 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:58 Pagina 4

DDAASSHHBBOOAARRDD AANNDD CCOONNTTRROOLLSS

DASHBOARD DASHBOARD...... 5 WINDOW WASHING ...... 49 AND CONTROLS INSTRUMENT PANEL...... 6 CEILING LIGHTS...... 51 SYMBOLS ...... 7 CONTROLS...... 54 SAFETY THE FIAT CODE SYSTEM ...... 7 INTERIOR FITTINGS...... 56 THE KEYS ...... 8 DOORS ...... 59

STARTING STARTING ALARM ...... 11 WINDOW WINDERS ...... 63 AND DRIVING IGNITION DEVICE ...... 13 BOOT ...... 64 INSTRUMENTS ...... 14 BONNET...... 68 WARNING MESSAGES LIGHTS AND DIGITAL DISPLAY ...... 16 ROOF RACK/SKI RACK ...... 69 MULTIFUNCTIONAL DISPLAY ...... 21 HEADLIGHTS ...... 70

IN AN TRIP COMPUTER ...... 30 ABS SYSTEM ...... 71 EMERGENCY ESP SYSTEM ...... 72 ...... 33 TRACTION PLUS SYSTEM ...... 75 HEAD RESTRAINTS...... 36 AND CARE

MAINTENANCE EOBD SYSTEM ...... 76 STEERING WHEEL ...... 37 PARKING SENSORS ...... 77 REARVIEW MIRRORS ...... 37 SOUND SYSTEM ...... 79

TECHNICAL HEATING AND CLIMATE CONTROL SYSTEM ...... 39

SPECIFICATIONS ELECTRICAL/ELECTRONIC DEVICES HEATING AND VENTILATION ...... 41 INSTALLATION...... 80 MANUAL CLIMATE CONTROL SYSTEM ...... 44 AT THE FILLING STATION ...... 80 INDEX EXTERNAL LIGHTS ...... 47 ENVIRONMENTAL PROTECTION...... 82 4 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:58 Pagina 5

DASHBOARD The presence and position of the controls, the instruments and the indicators may vary according to the versions. DASHBOARD AND CONTROLS SAFETY STARTING STARTING AND DRIVING WARNING MESSAGES LIGHTS AND IN AN EMERGENCY AND CARE MAINTENANCE

F0T0070m fig. 1 TECHNICAL

1. Vent for air delivery to side windows - 2. Adjustable and directable air vent - 3. Left stalk: external lights control - SPECIFICATIONS 4. Instrument and warning light panel - 5. Right stalk: windscreen wiper controls, rear window wiper, trip computer - 6. Sound sys- tem (for versions/markets, where provided) - 7. Emergency light switch, rear heated window, ASR / Traction Plus system (for ver- sions/markets, where provided) on/off switch, rear swingdoor unlock device (for versions/markets, where provided) - 8. Airbag on passenger’s side (for versions/markets, where provided) - 9. Glove box/oddment compartment (for versions/markets, where pro- INDEX vided) - 10. Adjustable and directable air vents - 11. HVAC controls - 12. Glove box - 13. Ignition device - 14. Airbag on driver’s side - 15. Stalk for opening bonnet - 16. Control panel: fog lights/rear fog light/headlight position adjustment/display 5 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:58 Pagina 6

INSTRUMENT PANEL Versions with digital display DASHBOARD AND CONTROLS A Speedometer (speed indicator) B Fuel level gauge with reserve warning light SAFETY C Engine coolant temperature gauge and excessive temperature warning light D Rev counter E Digital display STARTING STARTING AND DRIVING mcWarning lights supplied in diesel versions only

F0T0072m WARNING MESSAGES LIGHTS AND fig. 2

Versions with multifunctional IN AN

EMERGENCY display A Speedometer (speed indicator) B Fuel level gauge with reserve warning

AND CARE light MAINTENANCE C Engine coolant temperature gauge and excessive temperature warning light D Rev counter TECHNICAL

SPECIFICATIONS E Multifunctional display

mcWarning lights supplied in diesel

F0T0071m versions only INDEX fig. 3 6 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:58 Pagina 7

SYMBOLS THE FIAT CODE SYSTEM THE WARNING LIGHT Y (or symbol on the display) Special coloured labels have been attached This is an electrical engine locking system GOES ON DURING TRAVEL

near or on some of the components of which increases protection against at- DASHBOARD

❒ AND CONTROLS your vehicle. These labels bear symbols tempted theft of the vehicle. It is auto- If the warning light Y (or symbol on the that draw your attention to the precau- matically activated when the ignition key display) turns on, the system is running tions required when handling the compo- is extracted. a self-test (for example for a voltage drop). The first time you stop the vehi- nent in question. SAFETY Each time the vehicle is started turning the cle, turn the ignition key to STOP and The inner surface of the engine bonnet ignition key to MAR, the Fiat CODE sys- then to MAR. If no failure is detected, includes a label with the different symbols tem control unit sends a recognition code the warning light Y does not light up. used. to the engine control unit to deactivate ❒ the inhibitor. If the warning light Y (or symbol on the display) remains steadily lit, repeat STARTING If, during ignition, the code is not correctly the procedure above leaving the key in AND DRIVING recognized, a warning light Y is lit on the the STOP position for over 30 sec- instrument panel. onds. If the problem persists, contact the Fiat Dealership. WARNING MESSAGES

In this case, turn the key to STOP and LIGHTS AND then back to MAR. Try with the other ❒ If the warning light Y (or symbol on keys provided if the problem persists. If the display) stays on, the code is not ac- the engine will not start up after this op- knowledged. In this case, return the key

eration, run the emergency start proce- to STOP and then to MAR; try with IN AN

dure (see chapter “In an emergency”) and the other keys provided if the problem EMERGENCY then contact the Fiat Dealership. persists. If the engine will not start up after this operation, run the emergency IMPORTANT Each key has its own code start procedure (see chapter “In an which must be stored by the system ECU.

emergency”) and then contact the Fiat AND CARE Contact the Fiat Dealership to have new Dealership. MAINTENANCE keys (up to eight) stored with the code. TECHNICAL

The electronic components SPECIFICATIONS inside the key may be dam- aged if the key is subjected to violent shocks. INDEX

7 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:58 Pagina 8

THE KEYS

KEY WITHOUT REMOTE DASHBOARD AND CONTROLS CONTROL fig. 4 The metal insert A enables:

SAFETY ❒ the ignition switch; ❒ the door locks; F0T00002m F0T0241m ❒ opening and closing of the fuel plug. fig. 4 fig. 5

STARTING STARTING Opening the windows with the

AND DRIVING KEY WITH REMOTE CONTROL WARNING remote control fig. 5 Press button B only after (for versions/markets, where provided) moving the key away from (for versions / markets, where provided) Æ The metal insert A enables: your body, especially your eyes, and Keep the button (on the key) pressed WARNING MESSAGES

LIGHTS AND from objects which could get dam- for more than 3 seconds to open the win- ❒ the ignition switch; aged (e.g. your clothes). Do not leave dows. ❒ the key unattended, because some- the door locks; one, a child especially, may acciden- To open the windows completely, keep the button pressed; if the pressure is sus- IN AN ❒ opening and closing of the fuel plug. tally press the button while handling

EMERGENCY the key. pended, the windows will immediately stop in their current position. To extract the metal insert, press button B. The same type of opening is also possible To fit it back in the handle proceed as fol- by operating the pawl of the front door lows: AND CARE The button Æ activates the unlocking handles. MAINTENANCE ❒ keep button B pressed and move the of all the doors (including the tail- metal insert A; gate/rear swing doors); ❒ release button B and turn the metal in- The button Á activates the locking of all

TECHNICAL sert A until hearing the proper locking the doors; SPECIFICATIONS click. The button ∞ activates the unlocking of the rocker door or the rear swing doors (for versions/markets, where pro- INDEX vided). 8 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:58 Pagina 9

Closing the windows with the Replacing the battery of the key remote control with remote control, fig. 6 (for versions / markets, where provided) Battery replacement: DASHBOARD

Á AND CONTROLS Keep the button (on the key) pressed ❒ press button A and open the metal in- for more than 3 seconds to close the win- sert B; dows. ❒ rotate the screw C to : using a small To close the windows completely, keep point screwdriver; SAFETY the button pressed; if the pressure is sus- ❒ pended, the windows will immediately take out the battery case D and replace F0T0300m stop in their current position. the battery E respecting its polarity; fig. 6 The same type of closing is also possible ❒

refit the battery case D inside the key STARTING

by operating the pawl of the front door and lock it turning the screw C to Á. Exhausted batteries are AND DRIVING handles. harmful to the environment. They should be disposed of as IMPORTANT During this operation the specified by law in the special window anti-crush safety system is inhib- WARNING containers provided, or take them to MESSAGES ited. the Fiat Dealership, which will deal LIGHTS AND with their disposal. IN AN

REQUEST OF ADDITIONAL EMERGENCY REMOTE CONTROLS The system can recognise up to 8 remote controls. Should a new remote control be AND CARE

necessary, contact a Fiat Dealership, tak- MAINTENANCE ing a personal identity document and the vehicle ownership documents with you. TECHNICAL SPECIFICATIONS INDEX

9 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:58 Pagina 10

DEAD LOCK SYSTEM WARNING Engaging the system (for versions/markets, where provided) Once the dead lock device The system is automatically enabled on all The dead lock system is a safety device has been engaged, doors the doors by double-pressing the button

DASHBOARD Á AND CONTROLS which prevents door opening from inside cannot be opened from the passen- positioned on the key with the remote the passenger compartment in case of an ger compartment in any way. For this control. attempted break-in (e.g.: window break- reason, make sure there are no per- The system has been successfully enabled ing). sons left inside the vehicle.

SAFETY when the direction indicators flash twice. It is the best protection possible against The system is not enabled if one or more attempted break-ins. We recommend en- than one door is not correctly locked. gaging it whenever the vehicle is parked This prevents any person from getting in- and left unattended. WARNING to the vehicle from an open door, and STARTING STARTING

AND DRIVING If the battery of the key with locks him/her inside the passenger com- remote control is down, the partment when the door is closed. dead lock device can be activated on- ly by fitting the metal insert of the key Disengaging the system WARNING

MESSAGES in both front door revolving plugs as LIGHTS AND described previously: in this case the The system is disabled automatically on dead lock device will stay engaged on- every door in the following cases: ly on the rear doors. ❒ when unlocking the doors; IN AN ❒

EMERGENCY when turning the ignition key to MAR. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

10 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:58 Pagina 11

ALARM Provision has been made for a maximum If this is the case, disable the alarm by number of acoustic/visual cycles, after pressing button Æ, check correct locking (for versions/markets, where provided) which the system resumes its standard of the doors, bonnet and boot, and enable control function. the alarm again by pressing button Á. DASHBOARD

In addition to all the remote control func- AND CONTROLS tions described above, an alarm has been Volumetric and anti-lift protections are If a door or the bonnet is not correctly installed, which is controlled by a receiv- disabled by pressing the control button in- closed, it will be excluded from the test- er unit located under the dashboard near stalled on the front dashboard (see para- ing by the alarm system. graph “Anti-lift protections). SAFETY the fuse box. If the alarm produces an acoustic signal IMPORTANT The engine stop function is even when the doors, bonnet and boot ALARM TRIPPING guaranteed by the Fiat CODE, which is au- are correctly closed, a failure has occurred The alarm trips in the following cases: tomatically activated when the ignition key in system operation. Go to a Fiat Dealer-

is extracted from the starter device. ship. STARTING ❒ when one of the doors or bonnet is AND DRIVING IMPORTANT If the central door locking opened illegitimately (perimeter pro- ENABLING THE ALARM tection); system is engaged using the metal insert Keep the doors and bonnets closed and of the key, the alarm is not enabled. ❒ WARNING when the ignition system is started up MESSAGES

either turn the ignition key to STOP or LIGHTS AND (ignition key rotated to MAR); IMPORTANT Originally, the alarm is con- remove it. Direct the key with the remote figured in compliance with the regulations ❒ when the battery cables are cut; control towards the vehicle and press but- existing in the different countries. ton Á, then release it. ❒ when someone is moving inside the IN AN Excluding some versions for specific mar- passenger compartment (volumetric EMERGENCY protection); kets, the system produces a sound warn- ing (beep) and enables door locking. ❒ when the vehicle is unusually lift- ed/tilted. Before the alarm is enabled, a self-test is

run. If a failure is detected, the system pro- AND CARE Depending on the markets where the ve- duces a new acoustic signal and shows a MAINTENANCE hicle is sold, alarm tripping causes either message on the display (see section a siren or direction indicators to go on “Warning lights and messages”). (for approx. 26 seconds). Alarm tripping and the number of cycles depend on the TECHNICAL sales market. SPECIFICATIONS INDEX

11 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:58 Pagina 12

DISABLING THE ALARM SIGNALS IN THE EVENT Press button Æ on the key with the re- OF ATTEMPTED BREAK-INS mote control. Whenever a break-in is attempted, a

DASHBOARD Y AND CONTROLS The following operations are performed warning light (or symbol on the dis- (excluding some versions): play) starts blinking on the instrument pan- el (in some versions a message also ap- ❒ the direction indicators turn on short- pears on the display - see section “Warn- SAFETY ly twice; ing lights and messages”). ❒ two short beeps are produced by the F0T0159m warning buzzer; fig. 7 DISABLING THE ALARM ❒ the doors are unlocked. To permanently disable the alarm (e.g. STARTING STARTING VOLUME-SENSING/ during prolonged vehicle shutdown), lock AND DRIVING IMPORTANT If the central door locking ANTI-LIFT PROTECTION the vehicle by turning the metal insert of system is engaged using the metal insert the key in the door lock. In this case, the of the key, the alarm is not disabled. To ensure correct operation of the pro- tection, it is advisable to fully close the side car will not be protected by the alarm sys- tem, while the engine immobiliser function WARNING MESSAGES

LIGHTS AND windows. is ensured by the Fiat CODE system If necessary, the function may be turned which is automatically activated when the off (e.g. if animals are left in the car) by key is removed from the ignition switch. pressing key A-fig. 7, located on the front IN AN courtesy light before activating the alarm. IMPORTANT If the battery of the key EMERGENCY with the remote control goes down or the Function deactivation is indicated by the system fails, the alarm is disabled by plac- led located on the key flashing for a few ing the key in the ignition system and ro- seconds. If the volume-sensing/anti-lift tating it to MAR.

AND CARE protection is turned off, this must be re- MAINTENANCE peated whenever the instrument panel is turned off. TECHNICAL SPECIFICATIONS INDEX

12 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:58 Pagina 13

IGNITION DEVICE WARNING Never extract the key while The key can be turned to 3 different po- the vehicle is moving. The

sitions fig. 8: DASHBOARD

steering wheel would be locked as AND CONTROLS ❒ STOP: the engine is off, the key can be soon as the steering wheel is turned. extracted, the steering is locked. Some This also applies to cases in which the electrical devices (e.g. car radio, central vehicle is towed. Under no circum- door locking system, alarm, etc.) are en- stances should after-market opera- SAFETY abled. tions be carried out involving steering fig. 8 F0T0039m system or steering column modifica- ❒ MAR: driving position. All electrical de- tions (e.g.: installation of anti-theft vices work regularly. device) that could negatively affect STEERING COLUMN LOCK STARTING ❒ AVV: engine start. performance and safety, cause the AND DRIVING lapse of the warranty and also result The ignition device is fitted with a safety Engagement in vehicle non-compliance with type- system that forces the driver to return the approval requirements. ignition key to STOP before repeating the When the key is at STOP, remove the key WARNING MESSAGES starting operation, if the engine does not and turn the steering wheel until it locks. LIGHTS AND start up. Disengagement

Rock the steering wheel slightly as you IN AN

turn the ignition key to MAR. EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

13 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:58 Pagina 14

INSTRUMENTS

Instrument background colour and type

DASHBOARD may vary according to the version. AND CONTROLS SAFETY

fig. 9 F0T0150m fig. 10 F0T0151m

STARTING STARTING TACHOMETER REV. COUNTER fig. 10 AND DRIVING (speed indicator) fig. 9 The rev counter shows the engine rpm. It shows the vehicle speed. IMPORTANT The electronic injection con- trol system gradually shuts off the flow of WARNING MESSAGES LIGHTS AND fuel when the engine is “over-revving” re- sulting in a gradual loss of engine power. When the engine is idling, the rev counter

IN AN may indicate a gradual or sudden increase

EMERGENCY of the speed. This is normal and does not indicate a fault. It may be caused, for ex- ample, by the operation of the climate control system or fan. In this case, a slow

AND CARE change in engine speed is used to protect MAINTENANCE the battery charge. TECHNICAL SPECIFICATIONS INDEX

14 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:58 Pagina 15

FUEL LEVEL INDICATOR Turning on of the warning light B-fig. 11 (along with a message on the display) in- This shows the amount of fuel left in the dicates that the coolant fluid temperature fuel tank. is too high. In this case, stop the engine DASHBOARD The warning light A-fig. 11 turns on to and contact a Fiat Dealership. AND CONTROLS indicate that approximately 6 to 7 litres of fuel are left in the tank.

E - tank empty. SAFETY If the needle indicating the

F - tank full (see the instructions provid- F0T0152m engine coolant temperature ed in paragraph “Vehicle refuelling” in fig. 11 reaches the red area, stop the this section). engine immediately and con-

ENGINE COOLANT tact a Fiat Dealership. STARTING Do not travel when the fuel tank is almost AND DRIVING empty, because this may jeopardize the TEMPERATURE INDICATOR catalyst. This shows the temperature of the engine IMPORTANT The needle will point to E coolant fluid and starts working when the WARNING MESSAGES and warning light A will blink to indicate a fluid temperature exceeds approx. 50°C. LIGHTS AND fault in the system. Go to a Fiat Dealer- Under normal conditions, the needle ship to have the system checked. should hover around the middle of the scale according to the working conditions of the vehicle. IN AN EMERGENCY C - Low engine coolant temperature. H - High engine coolant temperature. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

15 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:58 Pagina 16

DIGITAL DISPLAY

STANDARD SCREEN fig. 12 DASHBOARD AND CONTROLS The standard screen shows the following information:

SAFETY A Headlight aiming position (only with dipped beam headlights on).

B Odometer (covered km or miles). fig. 12 F0T0017m fig. 13 F0T0025m C Clock (always displayed, even with ig-

STARTING STARTING nition key removed and front doors CONTROL BUTTONS fig. 13 Light adjustment inside vehicle AND DRIVING closed). + To scroll the displayed menu and the – with standard screen enabled, it is pos- Note With key removed (when opening related options upwards or to in- sible to adjust the brightness of the in- one of the front doors) the display turns crease the value displayed. strument panel and sound system. WARNING MESSAGES on and shows the time and km or miles LIGHTS AND covered for a few seconds. MENU Press briefly to display ESC the menu and/or to go to next Setup menu screen or to confirm the re- – to scroll the menu options upwards and quired menu option.

IN AN downwards;

EMERGENCY Hold pressed to go back to the – to increase or decrease values during set- standard screen. tings. – To scroll the displayed menu and the related options downwards or to de-

AND CARE crease the displayed value. MAINTENANCE Note Buttons + and – activate different functions according to the following situ- ations: TECHNICAL SPECIFICATIONS INDEX

16 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:58 Pagina 17

SETUP MENU fig. 14 Selecting a menu option Prolonged pressing of MENU ESC button The menu comprises a series of functions – briefly press button MENU ESC to se- – to quit the setup menu if you are in the arranged in a cycle which can be selected lect the menu option to set; menu;

through buttons + and –, thus gaining ac- DASHBOARD cess to the different select and setting (set- – press buttons + and – (by single press- – to quit the displayed menu if you are set- AND CONTROLS up) operations given in the following para- es) to select the new setting; ting an option; graphs. – briefly press button MENU ESC to – to save the changes to stored settings (and store the new setting and go back to the confirmed by pressing button MENU SAFETY The setup menu can be activated by briefly ESC). pressing button MENU ESC. previously selected menu option. The setup menu environment is timed; Single presses on buttons + and – will Selecting “Set Clock” when quitting the menu due to timing ex- scroll the setup menu options. piry, only the settings stored by the user – briefly press button MENU ESC to se- STARTING Handling modes differ with each other ac- lect the first value to change (hours); are saved (and confirmed by briefly press- AND DRIVING cording to the characteristic of the option ing button MENU ESC). selected. – press buttons + and – (by single press- es) to select the new setting; WARNING MESSAGES – briefly press button MENU ESC to LIGHTS AND store the new setting and go to the next setup menu option (minutes);

– after setting the values with the same IN AN

procedure, go back to the menu item pre- EMERGENCY viously selected. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

17 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:58 Pagina 18

Briefly press button MENU ESC to start browsing from the standard screen. Press + or – to browse with- in the menu. DASHBOARD

AND CONTROLS Note. Only the short menu can be accessed while the vehicle is moving for reasons of safety (“SPEED” set- ting). Stop the vehicle to access the full menu. SAFETY STARTING STARTING AND DRIVING WARNING MESSAGES LIGHTS AND IN AN EMERGENCY AND CARE MAINTENANCE

F0T1021g TECHNICAL SPECIFICATIONS INDEX fig. 14 18 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:58 Pagina 19

Setting the speed limit (SPEEd) To cancel the setting, proceed as follows: Adjusting the buzzer volume This function is used to set the vehicle – briefly press button MENU ESC: (On) (bUZZ) speed limit (km/h or mph); when this lim- will flash on the display; This function is used to adjust the volume DASHBOARD

it is exceeded the driver is immediately of the buzzer triggering in the event of fail- AND CONTROLS alerted (see section “Warning lights and – press button –: (Off) will flash on the dis- play; ure/warning indications and when MENU messages”). ESC, + and – buttons are pressed. – briefly press button MENU ESC to go

To set the speed limit, proceed as follows: SAFETY back to the menu screen or press the but- To adjust the desired volume proceed as – briefly press button MENU ESC, the ton for long to go back to the standard follows: message (SPEEd) and the previously set screen without storing settings. – briefly press button MENU ESC, the unit (km/h) or (mph) will appear on the display will show the wording (bUZZ); display; Setting the clock (Hour) – press button + or – to select the re- STARTING – press button + or – to select speed lim- With this function it is possible to set the quired volume (volume can be adjusted ac- AND DRIVING it activation (On) or deactivation (OFF); clock. cording to 8 levels). – if the function has been activated (On), To set the required unit proceed as fol- – briefly press button MENU ESC to go WARNING press buttons + or – to select the re- MESSAGES lows: back to the menu screen or press the but- LIGHTS AND quired speed limit and then press MENU ton for long to go back to the standard ESC to confirm; – briefly press button MENU ESC, screen without storing settings. “hours” will flash on the display; Note The speed may be set in the range from 30 to 200 km/h, or from 20 to 125 – press button + or – for setting; IN AN EMERGENCY mph according to the previously chosen – briefly press button MENU ESC: the unit (see “Setting the distance unit”) de- “minutes” start flashing on the display; scribed below. The setting will in- crease/decrease by five units each time – press the button + or – to set the de- sired value; AND CARE

button +/– is pressed. Hold button +/– MAINTENANCE pressed to increase/decrease the setting MENU ESC rapidly. When close to the desired value, – briefly press button to go press the button as many times as re- back to the menu screen or press the but- quired to complete the regulation. ton for long to go back to the standard screen without storing settings. TECHNICAL – Briefly press button MENU ESC to go SPECIFICATIONS back to the menu screen or press the but- ton for long to go back to the standard

screen without storing settings. INDEX

19 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:59 Pagina 20

Setting the unit (Unit) Front passenger’s airbag

With this function it is possible to set the and side bag F0T1014g unit. activation/deactivation

DASHBOARD (BAG P) AND CONTROLS To set the required unit proceed as fol- (for versions/markets, where provided) lows: This function is used to activate/deactivate MENU ESC – briefly press button MENU ESC, the + +

SAFETY the air bag on the passenger’s side. display will show the wording (Unit) and – – the previously set unit (km) or (mi); Proceed as follows: – press button + or – to select the re- ❒ press button MENU ESC and, after F0T1016g quired distance unit. viewing the message (BAG P OFF) (to F0T1015g

STARTING STARTING deactivate) or (BAG P On) (to activate) AND DRIVING – briefly press button MENU ESC to go by pressing buttons + or –, press the back to the menu screen or press the but- button MENU ESC again; ton for long to go back to the standard screen without storing settings. ❒ the confirmation request message will MENU ESC

WARNING be displayed; MESSAGES LIGHTS AND + + ❒ press buttons + or – to select (YES) – – (confirming activation/deactivation) or (no) (to abort); IN AN

EMERGENCY ❒ briefly press the button MENU ESC F0T1018g F0T1017g to view a message confirming your se- lection and go back to the menu screen. Alternatively, press the button for a prolonged time and go back to the stan- AND CARE MENU ESC MAINTENANCE dard screen without storing the set- tings. TECHNICAL SPECIFICATIONS F0T1020g F0T1019g INDEX

20 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:59 Pagina 21

MULTIFUNCTIONAL DISPLAY

(for versions/markets, where provided) DASHBOARD AND CONTROLS The vehicle can be equipped with a mul- tifunctional display that, according to the

settings made, will show useful informa- SAFETY tion when driving. fig. 15 F0T0019m fig. 16 F0T0025m “STANDARD” SCREEN fig. 15 The standard screen shows the following CONTROL BUTTONS fig. 16 Light adjustment inside vehicle STARTING information: AND DRIVING – with standard screen enabled, it is pos- A Date. + To scroll the displayed menu and the related options upwards or to in- sible to adjust the brightness of the in- B Odometer (covered km or miles). crease the value displayed. strument panel and sound system.

C Clock (always displayed, even with ig- WARNING MESSAGES nition key removed and front doors MENU Press briefly to display Setup menu LIGHTS AND closed). ESC the menu and/or go to next screen or confirm the required – to scroll the menu options upwards and D External temperature. menu option. downwards; E Headlight aiming position (only with – to increase or decrease values during set- IN AN

Hold pressed to go back to the EMERGENCY dipped beam headlights on). standard screen. tings. Note When opening one of the front doors, the display turns on and shows the – To scroll the displayed menu and the clock and the kilometres or miles covered related options downwards or to de- crease the displayed value. AND CARE for a few seconds. MAINTENANCE Note. Buttons + and – activate different functions according to the following situ- ations. TECHNICAL SPECIFICATIONS INDEX

21 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:59 Pagina 22

SETUP MENU fig. 17 Selecting an option of the main menu Selecting the “Set Date” and “Set time” with submenu The menu comprises a series of functions – Briefly press button MENU ESC to se- arranged in a cycle which can be selected – Briefly press the button MENU ESC to lect the first value to change (e.g. hours DASHBOARD

AND CONTROLS through buttons + and –, thus gaining ac- display the first submenu option. /minutes or year / month / day). cess to the different select and setting (set- up) operations given in the following para- – Press buttons + or – (by single press- – Press buttons + or – (by single press- graphs. A submenu is provided for some es) to scroll all the submenu options. es) to select the new setting. SAFETY items (Clock and Unit setting). – Briefly press the button MENU ESC to – Briefly press button MENU ESC to The setup menu can be activated by briefly select the displayed submenu option and store the new setting and go to the next pressing button MENU ESC. open the relevant setup menu. setup menu option: if this is the last one you will go back to the previously selected op- Single presses on buttons + or – will scroll – Press buttons + or – (by single press- tion of the main menu. STARTING STARTING es) to select the new setting for this sub-

AND DRIVING the setup menu options. menu option. Handling modes are different according to Prolonged pressing of MENU ESC button the characteristic of the option selected. – Briefly press the button MENU ESC to store the new setting and go back to the – to quit the setup menu if you are in the main menu; WARNING MESSAGES previously selected submenu option. LIGHTS AND Selecting an option of the main menu without submenu – to quit the main menu if you are in an- other point of the menu (e.g.: at submenu – Briefly press the button MENU ESC to option setting level, at submenu level or

IN AN select the main menu option to set. at main menu option setting level); EMERGENCY – Press buttons + or – (by single press- – to save the changes to stored settings (and es) to select the new setting. confirmed by pressing button MENU ESC). – Briefly press the button MENU ESC to

AND CARE store the new setting and go back to the The setup menu environment is timed; MAINTENANCE main menu option previously selected. when quitting the menu due to timing ex- piry, only the settings stored by the user are saved (and confirmed by briefly press- ing button MENU ESC). TECHNICAL SPECIFICATIONS INDEX

22 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:59 Pagina 23

Example: Example: Briefly press button MENU ESC to start browsing Deutsch Day Italiano English from the standard screen. Press + or – to browse with-

in the menu. DASHBOARD Nederland AND CONTROLS Español Note. Only the short menu may be accessed for rea- Year Month sons of safety while the vehicle is moving (“Speed Beep” Turkçe Français setting). Stop the vehicle to access the full menu.

Português SAFETY + MENU ESC + short pressing + of button MENU ESC – short pressing + STARTING – SPEED BEEP TRIP B DATA – AND DRIVING of button – EXIT MENU SET TIME + WARNING + – MESSAGES – PASSENGER BAG LIGHTS AND

SERVICE SET DATE IN AN

+ – – EMERGENCY +

BELT BUZZER ( ) * SEE RADIO AND CARE MAINTENANCE – – F0T1000g + AUTOCLOSE + BUTTON VOL.

– TECHNICAL

– UNITS SPECIFICATIONS BUZZER VOLUME + – LANGUAGE – + fig. 17 + + INDEX (*) This function is only displayed after the SBR system is deactivated by a Fiat Dealership. 23 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:59 Pagina 24

Speed limit (Speed Beep) Note The speed may be set in the range Trip B On/Off (Trip B data) from 30 to 200 km/h, or from 20 to 125 mph This function is used to set the vehicle according to the previously chosen unit (see Through this option it is possible to acti- speed limit (km/h or mph); when this lim- vate (On) or deactivate (Off) the Trip B

DASHBOARD “Setting the distance unit”) described below. AND CONTROLS it is exceeded, the driver is immediately The setting will increase/decrease by five (partial trip) display. alerted (see section “Warning lights and units each time button + / – is pressed. Hold messages”). For further information see section “Trip button +/– pressed to increase/decrease the computer”.

SAFETY To set the speed limit, proceed as follows: setting rapidly. Complete the setting by briefly pressing the button when the required For activation / deactivation, proceed as – briefly press button MENU ESC, the setting is approached. follows: display will show the wording (Speed Beep); – Briefly press button MENU ESC to go – briefly press button MENU ESC: (On) back to the menu screen or press the but- or (Off) will flash on the display (accord- STARTING STARTING – press button + or – to select speed lim- ing to previous setting); AND DRIVING ton for long to go back to the standard it activation (On) or deactivation (Off); screen without storing settings. – press button + or – for setting; – if the function has been activated (On), To cancel the setting, proceed as follows: press buttons + or – to select the re- – briefly press button MENU ESC to go back to the menu screen or press the but- WARNING MESSAGES – briefly press button MENU ESC: (On)

LIGHTS AND quired speed limit and then press MENU ESC to confirm. will flash on the display; ton for long to go back to the standard screen without storing settings. – press button –: (Off) will flash on the dis- play; IN AN

EMERGENCY – briefly press button MENU ESC to go back to the menu screen or press the but- ton for long to go back to the standard screen without storing settings. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

24 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:59 Pagina 25

Setting the clock (Set time) – when accessing the “Mode” submenu: Set date (Set date) This function enables clock setting using briefly press button MENU ESC : the This function enables updating the date two submenus: “Time” and “Mode”. previously set display mode will flash on (day - month - year). the display; DASHBOARD

Proceed as follows: To update the date proceed as follows: AND CONTROLS – press button + or – to select “24h” or – briefly press button MENU ESC, the “12h”. – briefly press button MENU ESC: “day” display will show the two sub-menus will flash on the display;

“Time” and “Mode”; When you have made the required set- SAFETY tings, briefly press button MENU ESC – press button + or – for setting; – press button + or – to surf the two sub- to go back to the menu screen or press – briefly press button MENU ESC: menus; the button for long to go back to the stan- “month” will flash on the display; – select the required option and then dard screen without storing settings. – press button + or – for setting;

press button MENU ESC briefly; STARTING – hold MENU ESC pressed to go back – briefly press button MENU ESC: AND DRIVING – when accessing the “Hour” submenu: to the standard screen or main menu ac- “year” will flash on the display; briefly press button MENU ESC, the cording to the points of the menu where “hours” will flash on the display; you are at. – press button + or – for setting. WARNING MESSAGES – press button + or – for setting; Note The setting increases or decreases LIGHTS AND by one unit each time button + or – is – briefly press button MENU ESC, the pressed. Hold the button pressed to in- “minutes” will flash on the display; crease/decrease the setting rapidly. Com-

plete the setting by briefly pressing the IN AN – press button + or – for setting; button when the required setting is ap- EMERGENCY proached. – Briefly press button MENU ESC to go back to the menu screen or press the but- AND CARE

ton for long to go back to the standard MAINTENANCE screen without storing settings. TECHNICAL SPECIFICATIONS INDEX

25 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:59 Pagina 26

Audio repetition (See radio) Automatic central door locking Set units (Units) This function enables viewing information with vehicle running (Autoclose) This function may be used to set the mea- regarding the sound system on the display. When activated (On), this function auto- surement unit in three submenus: “Dis- DASHBOARD

AND CONTROLS – Radio: tuned radio station frequency or matically locks the doors when the vehi- tances”, “Consumption” and “Tempera- RDS message, automatic tuning activation cle speed exceeds 5 km/h. ture”. or AutoSTore; To activate (On) or to deactivate (Off) this To set the required unit proceed as follows: SAFETY – Audio CD, MP3 CD: track number; function proceed as follows: – briefly press button MENU ESC to dis- – CD Changer: CD number and track – briefly press button MENU ESC to dis- play the three sub-menus; number. play one sub-menu; – press button + or – to browse the three To activate (On) or to deactivate (Off) – briefly press button MENU ESC: (On) sub-menus;

STARTING STARTING sound system info displaying proceed as or (Off) will flash on the display (accord- AND DRIVING follows: – select the required submenu and then ing to previous setting); briefly press button MENU ESC; – briefly press MENU ESC: (On) or (Off) – press button + or – for setting; will flash on the display (according to pre- – when accessing the “Distances”submenu: vious setting); – briefly press button MENU ESC to go briefly press MENU ESC: either “km” or WARNING MESSAGES LIGHTS AND back to the submenu screen or press the “mi” will appear on the display (according – press button + or – for setting; button for long to go back to the standard to the previous setting); – briefly press button MENU ESC to go screen without storing settings; – press button + or – for setting;

IN AN back to the menu screen or press the but- – hold MENU ESC pressed to go back – when accessing the “Consumption”submenu: EMERGENCY ton for long to go back to the standard to the standard screen or main menu ac- screen without storing settings. cording to the points of the menu where briefly press MENU ESC: either “km/l ”, you are at. “l/100km” or “mpg” will appear on the dis- play (according to the previous setting); AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

26 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:59 Pagina 27

If the distance unit set is “km” the fuel con- Select language (Language) Adjust the failure/warning buzzer sumption unit will be displayed in km/l or volume (Buzzer volume) l/100km. The messages can be displayed in the fol- lowing languages: Italian, German, English, With this function the volume of the DASHBOARD

If the distance unit set is “mi” the fuel con- Spanish, French, Portuguese, Turkish and buzzer accompanying any failure/warning AND CONTROLS sumption unit will be displayed in “mpg”. Dutch. indication can be adjusted according to 8 levels. – press button + or – for setting; To set the required language proceed as

follows: To adjust the desired volume proceed as SAFETY – when accessing the “Temperature”submenu: follows: briefly press MENU ESC: either “°C” or – briefly press button MENU ESC: the “°F” will appear on the display according previously set “language” “will flash on the – briefly press button MENU ESC: the to the previous setting; display”; previously set volume “level” will flash on the display; – press button + or – for setting; – press button + or – for setting; STARTING – press button + or – for setting; AND DRIVING When you have made the required set- – briefly press button MENU ESC to go tings, briefly press button MENU ESC to back to the menu screen or press the but- – briefly press button MENU ESC to go go back to the menu screen or press the ton for long to go back to the standard back to the menu screen or press the but- button for long to go back to the standard WARNING screen without storing settings. ton for long to go back to the standard MESSAGES screen without storing settings. screen without storing settings. LIGHTS AND – hold MENU ESC pressed to go back to the standard screen or main menu ac-

cording to the points of the menu where IN AN

you are at. EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

27 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:59 Pagina 28

Adjust the button volume S.B.R. buzzer reactivation Note The “Scheduled Service Plan” re- (Button Vol.) (Belt Buzzer) quires the vehicle to be serviced every 30,000 km (or 18,000 mi). This indication This function may be used to adjust the This function is only displayed after Fiat will appear automatically with the key at DASHBOARD AND CONTROLS volume of the beep accompanying the ac- Dealership has deactivated the S.B.R. sys- MAR starting from 2,000 km (or 1240 mi) tivation of buttons MENU ESC, + and tem (see paragraph “S.B.R. system” in sec- and will be presented automatically every – can be adjusted according to 8 levels. tion “Safety devices”). 200 km (or 124 mi). The indications will

SAFETY To adjust the desired volume proceed as appear more frequently when there are follows: Scheduled Servicing (Service) 200 km left. The indication will appear in kilometres or miles depending on the unit – briefly press button MENU ESC: the Through this function it is possible to dis- play information connected to proper ve- set. When the next scheduled servicing previously set volume “level” will flash on is approaching, the message “Service” will the display; hicle servicing.

STARTING STARTING appear on the display followed by the AND DRIVING – press button + or – for setting; This information is consulted as follows: number of kilometres or miles left when the key is turned to MAR. Go to the – briefly press button MENU ESC to go – briefly press button MENU ESC: ser- Fiat Dealership where the “Scheduled Ser- back to the menu screen or press the but- vice in km or mi, according to previous vice Plan” operations will be performed setting, will be displayed (see paragraph WARNING MESSAGES

LIGHTS AND ton for long to go back to the standard and the message will be reset. screen without storing settings. “Units”); – briefly press button MENU ESC to go back to the menu screen or press the but- IN AN ton for long to go back to the standard EMERGENCY screen. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

28 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:59 Pagina 29

Passenger front and side airbag

activation/deactivation F0T1009g (Passenger bag)

(for versions/markets, where provided) DASHBOARD MODE AND CONTROLS This function is used to activate/deactivate + + the airbag on the passenger’s side. – –

Proceed as follows: SAFETY ❒ briefly press button MENU ESC and, F0T1003g after displaying the message “Bag pass: F0T1004g Off) (to deactivate) or Bag pass: On) (to

activate) by pressing the buttons + and MODE STARTING –, press the button MENU ESC again; AND DRIVING + + ❒ the display will show the confirmation – – message; WARNING MESSAGES ❒ press buttons + or – to select either LIGHTS AND

Yes (to confirm activation/deactivation) F0T1008g F0T1009g or No (to abort); ❒ briefly press the button MENU ESC MODE IN AN

to view a message confirming your se- EMERGENCY lection and go back to the menu screen. Alternatively, press the button for a prolonged time and go back to the stan- F0T1010g dard screen without storing the set- F0T1011g AND CARE

tings. MAINTENANCE F0T1013g F0T1012g TECHNICAL SPECIFICATIONS INDEX

29 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:59 Pagina 30

Exit Menu TRIP COMPUTER “Trip B” is supplied on versions having a multifunctional display and is used to dis- This is the last function that closes the set- play data relating to: ting cycle listed in the initial menu screen. General features

DASHBOARD – Trip distance B AND CONTROLS Briefly press button MENU ESC to go The “Trip computer” is used to display in- back to the standard screen without stor- formation on vehicle operation when the – Average consumption B ing settings. key is turned to MAR. This function al- lows to define two separate trips called – Average speed B SAFETY Press button – to return to the first menu “Trip A” and “Trip B” for monitoring the – Travel time B (driving time). option (Speed Beep). “complete mission” of the vehicle (trip) in Note “Trip B” functions may be disabled a reciprocally independent manner. Both (see paragraph “Trip B on”). “Range” and functions are resettable (reset - start of “Instant consumption” cannot be reset. new mission). STARTING STARTING AND DRIVING “Trip A” is used to display data relating to: – Range – Trip distance WARNING MESSAGES LIGHTS AND – Average consumption – Instant consumption – Average speed IN AN

EMERGENCY – Travel time (driving time). AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

30 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:59 Pagina 31

Values displayed Trip distance Trip time Range Indicates the distance covered from the Indicates the time elapsed since the start start of a new mission. of a new mission.

Indicates the travel distance left before the DASHBOARD vehicle runs out of the fuel in the tank. Average consumption IMPORTANT If information is not avail- AND CONTROLS The message “----” will appear on the dis- able, the message “----” will appear instead play in the following cases: Represents the approximate average con- of the Trip Computer values. Counting of sumption from the start of a new mission.

the different values will be resumed reg- SAFETY – value lower than 50 km (or 30 mi) Instant consumption ularly when normal operation is restored. – vehicle left parked with engine running This will not cause any resetting of the val- for long. Indicates the fuel consumption. The val- ues displayed before the failure nor start- ue is constantly updated. The message ing a new mission. IMPORTANT Changes of the range value “----” will appear on the display if the ve- STARTING STARTING

can be affected by many factors: driving hicle is parked with the engine running. AND DRIVING style (see paragraph “Driving style” in sec- tion “Starting and driving”), type of route Average speed (motorway, urban cycle, mountain roads, Represents the vehicle average speed as a WARNING etc…), conditions of use of the vehicle MESSAGES function of the overall time elapsed since LIGHTS AND (load, tyre pressure, etc…). Trip planning the start of a new mission. must take into account the above notes. IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

31 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:59 Pagina 32

New mission “Start trip” procedure The new mission begins after: With ignition key on MAR, press and hold button TRIP pressed for over 2 seconds

DASHBOARD – “manual” resetting by the user, by press-

AND CONTROLS to reset. ing the relevant button; – “automatic” resetting, when the “Trip Exit Trip distance” reaches 3999.9 km or 9999.9 km SAFETY (according to the type of display) or when To exit the Trip function: hold MENU the “Trip time” reaches 99.59 (99 hours ESC pressed for longer than 2 seconds. fig. 18 F0T0038m and 59 minutes); – disconnection/reconnection of the bat-

STARTING STARTING TRIP control button fig. 18 tery. AND DRIVING Button TRIP located on the top of the IMPORTANT Value resetting from the right steering column stalk is used (with screens of “Trip A” makes it possible to ignition key at MAR) to display and re- exclusively reset the data regarding this WARNING MESSAGES set the previously described values to start function. LIGHTS AND a new mission: IMPORTANT Value resetting from the – short pressing to display the different screens of “Trip B” makes it possible to values; exclusively reset the data regarding this IN AN function. EMERGENCY – prolonged pressing to reset and then start a new mission. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

32 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:59 Pagina 33

SEATS

FRONT SEATS fig. 19 DASHBOARD AND CONTROLS A WARNING

All adjustments must be SAFETY made with the vehicle sta- tionary. fig. 20 F0T0205m

Lumbar adjustment of driver’s STARTING Longitudinal adjustment AND DRIVING Lift lever A and push the seat forwards (for versions/markets, where provided) and backwards: your arms should rest on the steering wheel rim while you are dri- Turn knob D to customize the position of WARNING MESSAGES ving. the back against the backrest. LIGHTS AND Seat warming fig. 19 F0T0153m (for versions/markets, where provided) WARNING IN AN After releasing the adjust- Adjustment of driver’s seat height Place the key in the position MAR and EMERGENCY ment lever, always check (for versions/markets, where provided) press button A-fig. 20 to enable/disable that the seat is locked on the runners this function. Operate lever C to lift or lower the rear by trying to move it back and forth. If When the function is enabled, the LED on it is not locked, the seat may move area of the cushion to achieve the most AND CARE

the button turns on. MAINTENANCE unexpectedly and make you lose con- comfortable driving position. trol of the vehicle. IMPORTANT Adjustment must be car- ried out by the driver sitting in the rele- vant seat. TECHNICAL Adjusting backrest tilting SPECIFICATIONS Turn knob B. INDEX

33 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:59 Pagina 34

RECESSING FOLDABLE PASSENGER’S SEAT (for versions/markets, where provided) DASHBOARD

AND CONTROLS Some versions have the passenger’s seat which folds into a recessed compartment. IMPORTANT Only move the seat if there

SAFETY are no passengers in the rear seats.

Folding the seat fig. 22 F0T0163m To fold the seat proceed as follows:

STARTING STARTING ❒ AND DRIVING open the door on the passenger’s side; ❒ pull the two levers A-fig. 21 on the sides of the seat and tip it forward fol- lowing the indications of the arrow; WARNING MESSAGES LIGHTS AND ❒ then, push the backrest B-fig. 22 down: the seat is now folded all the way down in the “table” position; fig. 21 F0T0274m

IN AN ❒ pull the lever C-fig. 23 and push the EMERGENCY backrest down as much as possible: the fig. 23 F0T0164m seat is now completely folded. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

34 001-035 QUBO GB 1ed:001-035 Fiorino GB 1ed 3-12-2009 15:59 Pagina 35 DASHBOARD AND CONTROLS SAFETY

fig. 24 F0T0165m fig. 25 F0T0237m fig. 25a F0T0340m

Putting the seat back in position STARTING

WARNING PARTITION AND DRIVING To bring the seat back to the normal po- If there is no partition be- (4 seater multi transporter sition proceed as follows: tween the cabin and the versions) ❒ grab the lever A-fig. 24 and lift the loading compartment, large objects WARNING MESSAGES backrest; or packs may partially occupy the FIXED PARTITION fig. 25a LIGHTS AND passenger compartment. Make sure ❒ grab the levers B-fig. 25 and lift the back- that these objects or packs are se- It is installed behind the backrest of the rest further more up. cured by the supplied restraint de- rear seats.

vices, therefore not being an obstacle IN AN

or posing risks during driving. EMERGENCY AND CARE

WARNING ACCES TO REAR SEATS MAINTENANCE When the passenger’s seat is Access to the rear seats is gained by open- in recessed position, the re- ing one of the rear sliding doors (see in- sulting space cannot be used as a structions provided in paragraph “Doors” loading compartment. During vehicle TECHNICAL

of this section). SPECIFICATIONS travel we recommend that all objects be removed or secured so that they do not become an obstacle or pose

a risk during driving. INDEX

35 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 36

HEAD RESTRAINTS

FRONT fig. 26 DASHBOARD AND CONTROLS Head restraints are adjustable in height and they lock automatically in the required position. SAFETY ❒ Upward adjustment Raise the head re- straint until you hear it click in position. fig. 26 F0T0053m fig. 27 F0T0054m ❒ Downward adjustment Press button A and lower the head restraint. STARTING STARTING REAR HEAD RESTRAINTS AND DRIVING fig. 27 - 27a (for versions/markets, where provided) WARNING Perform these operations Lift the rear head restraints to use them. WARNING MESSAGES LIGHTS AND only when the car is stationary To bring the head restraint back to its and the engine is not running. non-use position, press buttons A and A Remember that the head restraints push the head restraint down into the backrest. IN AN should be adjusted to support the

EMERGENCY back of your head and not your neck. To extract the head restraint, raise it un- fig. 27a - 4 seater multi F0T0341m Only in this position do they exert til hearing the click (position of use) indi- transporter versions their protective action. cating that it has come all the way out. To optimise head restraint protective IMPORTANT During travel rear seat pas- AND CARE action, adjust the backrest upright MAINTENANCE and keep your head as close as sengers must always set the head re- possible to the head restraint. straints in the “all the way out” position. TECHNICAL SPECIFICATIONS INDEX

36 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 37

STEERING WHEEL REARVIEW MIRRORS

In some versions the steering wheel po- INTERAL MIRROR fig. 29 sition can be adjusted both axially and in DASHBOARD height. (for versions/markets, where provided) AND CONTROLS Proceed as follows: The mirror is fitted with a safety device that causes its release in the event of a vi- ❒ release the lever A-fig. 28 pushing it olent crash. SAFETY forwards (position 1); It can be moved using lever A to two dif- ❒ adjust the steering wheel as required; fig. 28 F0T0040m ferent positions: normal or antiglare. ❒ lock the lever A pulling it towards the STARTING STARTING

steering wheel (position 2). AND DRIVING

WARNING WARNING MESSAGES LIGHTS AND Perform these adjustments only when the vehicle is sta- tionary and the engine is not running. IN AN

fig. 29 F0T0027m EMERGENCY WARNING Under no circumstances

should aftermarket opera- AND CARE tions involving steering system or MAINTENANCE steering column modifications (e.g.: installation of anti-theft device) be carried out that could badly affect performance and safety. This also TECHNICAL causes the warranty to become null SPECIFICATIONS and void and results in vehicle non- compliance with type-approval re-

quirements. INDEX

37 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 38

C D DASHBOARD AND CONTROLS B SAFETY

fig. 30 F0T0042m fig. 31 F0T0194m fig. 32 F0T0041m

STARTING STARTING DOOR MIRRORS Manual regulation Electrical regulation AND DRIVING From the vehicle inside pull the lever A- (for versions/markets, where provided) Manual mirror folding fig. 31. Door mirrors are regulated electrically When required (for example when the only if the ignition key is in position MAR. WARNING MESSAGES LIGHTS AND mirror becomes an obstacle in narrow Proceed as follows: spaces) it is possible to fold the mirror moving it from position A-fig. 30 to po- ❒ use the diverter A-fig. 32 to select the sition B. desired mirror (right or left hand): IN AN ❒

EMERGENCY move the diverter A in position B and direct the left-hand side rear door mir- ror; WARNING ❒ move the diverter A in position D and

AND CARE During vehicle travel the mir- direct the right-hand side rear door MAINTENANCE rors must always be posi- mirror. tioned as shown in A-fig. 30. After this regulation, reposition the di- verter A in the intermediate lock position

TECHNICAL C. SPECIFICATIONS WARNING Rear door mirrors are curved and slightly alter the percep- INDEX tion of distance.

38 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 39

HEATING AND CLIMATE CONTROL SYSTEM DASHBOARD AND CONTROLS SAFETY STARTING STARTING AND DRIVING WARNING MESSAGES LIGHTS AND IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS

fig. 33 F0T0148m INDEX 1. Upper fixed vent - 2. Adjustable central vents - 3. Fixed side vent - 4. Adjustable side vents - 5. Vents in feet area 39 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 40 DASHBOARD AND CONTROLS SAFETY

fig. 34 F0T0031m fig. 35 F0T0030m

STARTING STARTING CENTRAL AND SIDE VENTS To use vents A and C operate the rele- AND DRIVING fig. 34-35 vant lever to turn them in the desired po- sition. A - Adjustable side vent. B - Fixed vent for side windows. WARNING MESSAGES LIGHTS AND C - Adjustable central vents. IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

40 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 41

HEATING AND VENTILATION

CONTROLS fig. 36 DASHBOARD A air temperature adjustment knob (for AND CONTROLS hot/cold air mixing)

B internal air recirculation on/off button SAFETY C fan activation knob D air distribution knob. STARTING STARTING

CLIMATE COMFORT AND DRIVING The knob D enables the air in the vehicle to reach all the areas in the passenger compartment according to 5 distribution WARNING MESSAGES levels: LIGHTS AND ¶ supply of air from central vents and side outlets;

ß feet heating and face refreshing (bilevel IN AN function); EMERGENCY © quicker heating of passenger com- partment; fig. 36 F0T0074m AND CARE

® warming of passenger compartment MAINTENANCE and windscreen demisting at the same time; - demisting and defrosting of wind- screen and front side windows. TECHNICAL SPECIFICATIONS INDEX

41 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 42

HEATING FAST DEMISTING/ Window demisting DEFROSTING OF WINDSCREEN Proceed as follows: AND FRONT SIDE WINDOWS In the event of considerable external mois- ❒ (MAX-DEF function) ture and/or rain and/or considerable dif- DASHBOARD turn knob A all the way to the right AND CONTROLS - ferences in temperature inside and out- (line on ); Proceed as follows: side the passenger compartment, perform ❒ turn knob C to the required speed; ❒ - the following preventive demisting proce- turn knob A on ; dure: SAFETY ❒ turn knob D on: ❒ - turn knob C on 4 ; ❒ turn cursor B on Y; ® to warm the feet and demist the ❒ - windscreen at the same time; turn knob D on ; ❒ turn knob A on -; ❒ ¶ ß to deliver air to the feet area and re- turn cursor B on . ❒ turn knob C on 2;

STARTING STARTING lease cooler air from central vents After demisting/defrosting, operate the

AND DRIVING ❒ - and outlets on the dashboard; turn knob D on having the possi- standard controls to restore the required bility to reach position ® if the win- © to heat the area quickly. comfort conditions. dows are not misty. WARNING MESSAGES LIGHTS AND FAST HEATING Proceed as follows:

IN AN ❒ close all the vents on the dashboard; EMERGENCY ❒ turn knob A on -; ❒ turn knob C on 4 -; ❒ turn knob D on ©. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

42 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 43

REGULATING THE ACTIVATION OF INTERNAL FAN SPEED AIR RECIRCULATION To ventilate the passenger compartment Turn cursor B to position v. DASHBOARD

properly proceed as follows: AND CONTROLS It is advisable to activate air recirculation ❒ fully open the central air vents and side during vehicle stops in queues or tunnels outlets; to prevent the introduction of polluted air

from the outside. SAFETY ❒ turn knob A to the blue section; Do not use the function for a long time, ❒ turn cursor B on ¶; particularly if there are many passengers fig. 37 F0T0048m ❒ turn knob C to the required speed; on board, to prevent the windows from misting up. ❒ turn knob D on ¥. DEMISTING/DEFROSTING OF REAR STARTING IMPORTANT The internal air recircula- HEATED WINDOW AND DOOR AND DRIVING tion system makes it possible to reach the MIRRORS (where provided) fig. 37 required “heating” or “cooling” conditions ( faster. Do not use the air recirculation Press button to engage this function. WARNING When the function is active, a led on the MESSAGES function on rainy/cold days as it would LIGHTS AND considerably increase the possibility of the button goes on. windows misting inside. To disable this function, press the button ( again. IN AN

IMPORTANT Do not apply stickers on EMERGENCY the inside of the rear window over the heating filaments to avoid damage that might cause it to stop working properly. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

43 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 44

MANUAL CLIMATE CONTROL SYSTEM (for versions/markets, where provided)

CLIMATE COMFORT DASHBOARD

AND CONTROLS The knob D enables the air in the vehicle to reach all the areas in the passenger compartment according to 5 distribution levels: SAFETY ¶ supply of air from central vents and side outlets; ß feet heating and face refreshing (bilevel function); STARTING STARTING AND DRIVING © quicker heating of passenger com- partment; ® warming of passenger compartment and windscreen demisting at the same WARNING MESSAGES LIGHTS AND time; - demisting and defrosting of wind- screen and front side windows. IN AN

EMERGENCY HEATING Proceed as follows: fig. 38 F0T0029m ❒ turn knob A all the way to the right (line on -); AND CARE MAINTENANCE ❒ turn knob C to the required speed; CONTROLS fig. 38 ❒ turn knob D on: A air temperature adjustment knob (for C fan and climate control system activa- hot/cold air mixing); tion/deactivation knob; ® to warm the feet and at the same time TECHNICAL demist the windscreen; SPECIFICATIONS B internal air recirculation on/off button; D air distribution knob. ß to deliver air to the feet area and re- lease cooler air from central vents and outlets on the dashboard; INDEX © to heat the area quickly. 44 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 45

FAST HEATING Window demisting ACTIVATION OF Proceed as follows: In the event of considerable external mois- INTERNAL AIR RECIRCULATION ❒ ture and/or rain and/or considerable dif-

close all the vents on the dashboard; DASHBOARD

ferences in temperature inside and out- Turn cursor B to position v. AND CONTROLS ❒ turn knob A on -; side the passenger compartment, perform It is advisable to activate air recirculation ❒ - the following preventive demisting proce- turn knob C on 4 ; dure: during vehicle stops in queues or tunnels ❒ D ß to prevent the introduction of polluted air SAFETY turn knob on . ❒ turn cursor B on ¶; from the outside. FAST DEMISTING/ ❒ turn knob A on -; Do not use the function for a long time, DEFROSTING OF WINDSCREEN ❒ turn knob C on 2; particularly if there are many passengers on board, to prevent the windows from AND FRONT SIDE WINDOWS STARTING

(MAX-DEF function) ❒ turn knob D on - having the possi- misting up. AND DRIVING bility to reach position ® if the win- Proceed as follows: dows are not misty. IMPORTANT The internal air recircula- ❒ - tion system makes it possible to reach the turn knob A on ; required “heating” or “cooling” condi- WARNING MESSAGES

REGULATING THE FAN SPEED LIGHTS AND ❒ turn knob C on 4 -; tions faster. Do not use the air recircula- tion function on rainy/cold days as it would ❒ - To ventilate the passenger compartment turn knob D on ; properly proceed as follows: considerably increase the possibility of the ❒ ¶ windows misting inside. turn cursor B on . ❒ fully open the central air vents and side IN AN After demisting/defrosting, operate the outlets; EMERGENCY standard controls to restore the required ❒ turn knob A to the blue section; comfort conditions. ❒ turn cursor B on ¶;

IMPORTANT The climate control system AND CARE is very useful for faster demisting because ❒ turn knob C to the required speed; MAINTENANCE it dries the air. Regulate the controls as ❒ © described above and engage the climate turn knob D on . control by pressing knob C. TECHNICAL SPECIFICATIONS INDEX

45 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 46

CLIMATE CONTROL (cooling) SERVICING THE SYSTEM Proceed as follows: Let the climate control system run for at ❒ least 10 minutes every month during the

DASHBOARD turn knob A to the blue section;

AND CONTROLS winter. Have the system inspected at a Fi- ❒ turn knob C on 4 -; at Dealership before the summer. ❒ turn cursor B on v; SAFETY ❒ turn knob D on ©; ❒ turn knob C. fig. 39 F0T0048m Regulating cooling

STARTING STARTING DEMISTING/DEFROSTING AND DRIVING Proceed as follows: OF REAR HEATED WINDOW ❒ turn cursor B on ¶; AND DOOR MIRRORS fig. 39 ❒ turn knob A to the right to increase the (for versions/markets, where provided) WARNING MESSAGES LIGHTS AND temperature; Press button ( to engage this function. ❒ turn knob C to the left to reduce the When the function is active, a led on the fan speed. button goes on. IN AN To disable this function, press the button EMERGENCY ( again. IMPORTANT Do not apply stickers on the inside of the rear window over the

AND CARE heating filaments to avoid damage that MAINTENANCE might cause it to stop working properly. TECHNICAL SPECIFICATIONS INDEX

46 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 47

EXTERNAL LIGHTS DIPPED BEAM HEADLIGHTS Turn the knurled ring to position 2. The The left-hand lever fig. 40 groups the con- warning light 3 on the instrument panel

trols for the external lights. DASHBOARD

will come on. AND CONTROLS The external lights can only be switched on when the ignition key is at MAR. MAIN BEAM HEADLIGHTS

The instrument panel and the various con- When the knurled ring is at 2, pull the SAFETY trols on the dashboard will come on when lever towards the steering wheel (2nd un- 1 the external lights are switched on. F0T0220m stable position). The warning light on fig. 40 the instrument panel will come on. LIGHTS OFF PARKING LIGHTS To turn the main beams off, pull the lever STARTING Knurled ring turned to position O. again towards the steering wheel (dipped AND DRIVING These lights can only be turned on with ig- beams will turn on). nition key at STOP or removed, by mov- SIDELIGHTS - TAILLIGHTS ing the left stalk knurled ring first to O and then to 6 or 2. FLASHING THE HEADLIGHTS WARNING 6 MESSAGES Turn the knurled ring to position . The LIGHTS AND 3 Warning light 3 on the instrument pan- Pull the lever towards the steering wheel warning light on the instrument panel st will come on. el will turn on. To select the right or left (1 unstable position) regardless of the lights use the direction indicator stalk. position of the knurled ring. The warning 1

light on the instrument panel will come IN AN

on. EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

47 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 48

DIRECTION INDICATORS “FOLLOW ME HOME” fig. 41 DEVICE Push the stalk to (stable) position: This device allows the illumination of the DASHBOARD AND CONTROLS ❒ space in front of the vehicle for a preset up (position 1): right-hand indicator time. ON; Activation ❒ down (position 2): left-hand indicator SAFETY ON. With the ignition key on STOP or re- moved, pull the stalk towards the steering Warning light Î or ¥ will blink on the in- fig. 41 F0T0157m wheel within 2 minutes from when the en- strument panel. gine is turned off.

STARTING STARTING Direction indicators are switched off au- Lane change function At each single movement of the stalk, the AND DRIVING tomatically when the steering wheel of the lights stay on for further 30 seconds up to vehicle is straightened. If you want to signal that you are changing lane, bring the left stalk in unstable posi- a maximum of 210 seconds; then the lights If you want the indicator to flash briefly to tion for shorter than half a second. are switched off automatically. show that you are about to change lane, WARNING

MESSAGES 3 LIGHTS AND The direction indicator on the selected Warning light on the instrument pan- which requires minimum steering wheel el lights up, and the corresponding mes- rotation, move the stalk up or down with- side flashes three times and then switch- es off automatically. sage appears on the display (see “Warn- out clicking into position (unstable posi- ing lights and messages”), whenever the tion). When released, the stalk will return IN AN stalk is moved. The warning light goes out to its home position. EMERGENCY when the stalk is operated and stays on until the device is automatically deactivat- ed. The time during which the lights stay on can only be increased by operating the

AND CARE stalk. MAINTENANCE Deactivation Keep the stalk pulled towards the steer- ing wheel for more than 2 seconds. TECHNICAL SPECIFICATIONS INDEX

48 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 49

WINDOW WASHING Do not use the windscreen wiper to remove layers of The right stalk fig. 42 controls windscreen snow or ice from the wind-

wiper/washer and rear heated window DASHBOARD

screen. In such conditions, the AND CONTROLS wiper/washer operation (for versions/ windscreen wiper may be subjected to markets, where provided). excessive stress and the motor protec- tion which prevents operation for a few WINDSCREEN WIPER\WASHER seconds may trip. If the issue persists, SAFETY contact the Fiat Dealership. The device can work only when the igni- tion key is on MAR. fig. 42 F0T0158m The right lever can take four different po- Move the lever to position A-fig. 42 (un- STARTING

sitions: AND DRIVING stable) to limit operation during the time O windscreen wiper off; when the lever is held in this position. The ≤ intermittent; lever will return to position and the wiper will be automatically stopped when re- WARNING MESSAGES ≥ continuous slow; leased. LIGHTS AND ¥ continuous fast. With the knurled ring in position ≤ the windscreen wiper will automatically adapt

to the speed of the vehicle. IN AN With windscreen wiper on and reverse EMERGENCY gear engaged, the rear window wiper is automatically activated. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

49 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 50

“Smart washing” function REAR WINDOW WIPER/ Deactivation Pull the stalk towards the steering wheel WASHER Operation will stop when releasing the (unstable position) to operate the wind- (for versions/markets, where provided) stalk. DASHBOARD

AND CONTROLS screen washer jet. The device can work only when the igni- Keeping the stalk pulled for more than half tion key is on MAR. a second, with just one movement it is Activation Do not use the rear window SAFETY possible to operate the washer jet and the wiper at the same time. Turn the knurled ring to ' to operate the wiper to remove layers of rear window wiper as follows: snow or ice from the rear win- The wiper stops working three strokes af- ❒ dow. In such conditions, the ter releasing the stalk. intermittent operation if the wind- windscreen wiper may be subjected to screen wiper is off; excessive stress and the motor protec- STARTING STARTING A further stroke after approx. 6 seconds AND DRIVING completes the wiping cycle. ❒ synchronised with the windscreen tion which prevents operation for a few wiper (but with half stroke frequency); seconds may trip. If rear window wiper operation is not reset, contact the ❒ continuous operation with reverse gear Fiat Dealership. engaged and windscreen wiper on. WARNING MESSAGES LIGHTS AND With windscreen wiper on and reverse gear engaged, rear window wiping will be continuous. IN AN

EMERGENCY Pushing the stalk towards the dashboard (unstable position) will activate the rear window washer. Keeping the stalk pushed for over half a second will also activate the rear window wiper. Releasing the stalk will AND CARE

MAINTENANCE activate the smart washing function as de- scribed for the windscreen wiper. TECHNICAL SPECIFICATIONS INDEX

50 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 51

CEILING LIGHTS

FRONT CEILING LIGHT DASHBOARD

WITH MOVABLE LENS AND CONTROLS The light switches on immediately when the front door is opened and switches off

when it is closed. SAFETY With the doors closed the light switches on/off by pressing the lens A-fig. 43 left- fig. 43 F0T0113m fig. 44 F0T0121m wards as illustrated in the figure.

Light switch on/off is gradual. IMPORTANT Before getting out of the STARTING FRONT CEILING LIGHT vehicle, make sure that both switches are AND DRIVING with SPOT LIGHTS fig. 44 Switch B performs the spot function; with in central position. The lights must go off (for versions/markets, where provided) ceiling lights off, it turns on the following: when the doors are closed in order to Switch A turns the ceiling lights on/off. ❒ light C if the left side is pressed; avoid draining the battery. In any case, if WARNING MESSAGES ❒ the switch is left inadvertently in the ON LIGHTS AND With switch A in central position, lights light D if the right side is pressed. position, the lights will turn off automati- C and D turn on/off when the doors are cally 15 minutes after turning the engine opened/closed. off. IN AN

With switch A pressed leftwards, lights C EMERGENCY and D always stay off. With switch A pressed rightwards, lights C and D always stay on. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

51 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 52

The switch A can take 3 different posi- tions: ❒ with the switch in central position (po- DASHBOARD

AND CONTROLS sition 0), the light turns on when a door is opened; ❒ with the switch pressed in upward po-

SAFETY sition (position 1), the light is constantly on; fig. 45 F0T0114m fig. 46 F0T0273m ❒ with the switch pressed in downward position (position 2 – AUTO OFF), the light is constantly off. STARTING STARTING REAR CEILING LIGHT REAR CEILING LIGHT AND DRIVING WITH MOVABLE LENS WITH SWITCH (for versions/markets, where provided) (for versions/markets, where provided) The light switches on immediately when The light switches on automatically when WARNING MESSAGES

LIGHTS AND the front door is opened and switches off the side sliding doors and rear swing- when it is closed. doors are opened and switches off when they are closed. With the doors closed the light switches on/off by pressing the lens A-fig. 45 left- With the doors closed the light switches IN AN

EMERGENCY wards as illustrated in the figure. on/off by pressing switch A-fig. 46. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

52 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 53

B SWITCHING ON/OFF C OF THE CEILING LIGHTS The ceiling lights turn on/off as described DASHBOARD

below. AND CONTROLS

AUTO Ceiling light switch-on without central locking

Front ceiling lights: switch on when front SAFETY A doors are opened. fig. 47 F0T0115m fig. 48 F0T0252m Rear ceiling lights: are switched on man- ually.

PORTABLE LIGHT BOOT LIGHT fig. 48 Portable light (as an alternative to rear STARTING (for versions/markets, where provided) (for versions/markets, where provided) ceiling light): stationary part is switched on AND DRIVING This light is installed on the right-hand side This light will turn on automatically when manually. of the loading compartment. It is used as opening the tailgate and it will turn off at

Ceiling light switch-off with central locking WARNING both a fixed light and a portable electric MESSAGES closing. LIGHTS AND torch. Front and rear ceiling lights (also with To use the portable torch A-fig. 47 first portable light option): switch off (with fad- press button B to extract it in the direc- ing effect) when side sliding doors, rear tion indicated by the arrow. Then, use swing-doors or front doors are closed. IN AN switch C to switch the light on/off. EMERGENCY Option with independent loading When the portable light is secured to its compartment stationary support, the battery of the elec-

tric torch is automatically recharged. Front ceiling lights: switch off (with fad- AND CARE ing effect) when front doors are closed. MAINTENANCE Portable light recharge when the vehicle is not running and the ignition key is either Rear ceiling lights (also with portable light in the STOP position or removed must option): switch off (with fading effect) when rear doors are closed. last max. 15 minutes. TECHNICAL SPECIFICATIONS INDEX

53 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 54

CONTROLS A EMERGENCY LIGHTS DASHBOARD AND CONTROLS Emergency lights switch on by pressing switch A-fig. 49, regardless of the posi- tion of the ignition key. SAFETY When the device is on warning lights Î and ¥ on the panel come on. fig. 49 F0T0049m fig. 50 F0T0036m Press switch A again to turn the lights off.

STARTING STARTING IMPORTANT The use of emergency lights FOG LIGHTS fig. 50 REAR FOG LIGHTS fig. 50 AND DRIVING is governed by the Highway Code of the (for versions/markets, where provided) country where you are driving. Keep to The rear fog lights switch on, with low the rules. To turn front fog lights on, press button beams or front fog lights on, by pressing 5. To activate these lights it is necessary the button 4. WARNING MESSAGES LIGHTS AND Emergency braking to have the side/taillights switched on. The warning light switches on 4 on the (for versions/markets, where provided) The warning light switches on 5 on the instrument panel. instrument panel. In the case of emergency braking the haz- Press the button again or switch off the

IN AN ard warning lights come on automatically Press the button again to turn the lights dipped beams and/or front fog lights (for EMERGENCY and the warning lights Î and ¥ in the off. versions/markets, where provided) to turn panel light up at the same time. The func- the rear fog lights off. tion is switched off automatically when the nature of the braking is no longer an emer-

AND CARE gency. This function complies with the leg- MAINTENANCE islation currently in force. TECHNICAL SPECIFICATIONS INDEX

54 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 55

FUEL CUT-OFF SYSTEM To reset vehicle operation, follow this WARNING procedure: This system triggers after a collision and If, after a crash, you smell fu- activates the following: ❒ turn the ignition key to MAR; el or notice leaks from the DASHBOARD

❒ AND CONTROLS ❒ switch off of fuel supply with conse- activate the right-hand indicator; fuel system, do not reset the system to avoid fire risk. quent engine switch off; ❒ deactivate the right-hand indicator; ❒ automatic door unlocking; ❒ activate the left-hand indicator; SAFETY ❒ switch on of all lights inside the vehicle. ❒ deactivate the left-hand indicator; ❒ When the system is triggered, the mes- activate the right-hand indicator; sage “Fuel cut-off tripped - see handbook” ❒ deactivate the right-hand indicator; is displayed on some versions. ❒ activate the left-hand indicator; STARTING AND DRIVING Carefully check the vehicle for fuel leaks, ❒ deactivate the left-hand indicator; for instance in the engine compartment below the vehicle or near the fuel tank ❒ turn the ignition key to STOP. area. WARNING MESSAGES LIGHTS AND After the collision, position ignition key on STOP to avoid battery draining. IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

55 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 56

INTERIOR FITTINGS

ARMREST ON DRIVER’S SEAT DASHBOARD AND CONTROLS fig. 51 (for versions/markets, where provided) In some versions the front seat on the dri- SAFETY ver’s side is supplied with an armrest.

The armrest is lowered/lifted as illustrat- F0T0056m F0T0069m ed by the arrows. fig. 51 fig. 53

STARTING STARTING GLOVE BOX AND DRIVING (for versions/markets, where provided) To open the glove box pull the handle A-fig. 53. WARNING MESSAGES LIGHTS AND

WARNING IN AN

EMERGENCY F0T0187m Do not travel with the glove fig. 52 box open: the passenger may get hurt in the event of a crash. ODDMENT COMPARTMENT fig. 52 AND CARE MAINTENANCE The oddment compartment is positioned opposite the front seat on the passenger’s side. TECHNICAL SPECIFICATIONS INDEX

56 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 57

A DASHBOARD AND CONTROLS SAFETY

fig. 54 F0T0075m fig. 55 F0T0118m fig. 56 F0T0117m

POWER OUTLET (12V) CIGAR LIGHTER ASHTRAY fig. 56 STARTING (for versions/markets, where provided) AND DRIVING The power outlet is positioned on the (for versions/markets, where provided) central console fig. 54 and is only opera- The cigar lighter is positioned on the cen- The ashtray consists of a removable plas- tional when the ignition key is turned to tral console. Press button A-fig. 55 to en- tic box with spring loaded opening that WARNING MAR. able the cigar lighter after turning the ig- MESSAGES can be fitted into the cup/can recesses on LIGHTS AND nition key to MAR. the central console. After a few seconds the button goes back to its initial position, and the cigar lighter is ready for use. IN AN WARNING EMERGENCY IMPORTANT Always check that the cig- Do not use the ashtray as a ar lighter has been disabled. paper bin: paper may go on fire when contacting cigarette butts. AND CARE MAINTENANCE WARNING The cigar lighter reaches high temperatures. Handle TECHNICAL

with care. The device must not be SPECIFICATIONS used by children: risk of fire and/or burns. INDEX

57 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 58 DASHBOARD AND CONTROLS SAFETY

fig. 57 F0T0188m fig. 58 F0T0204m fig. 59 F0T0207m

STARTING STARTING SUN VISORS fig. 57 DESK AND DRIVING The sun visors on the driver’s and pas- (for versions/markets, where provided) senger’s sides are directable both frontal- In the middle of the dashboard above the ly and sideways. sound system compartment a desk WARNING MESSAGES LIGHTS AND Behind the sun visor on the driver’s side A-fig. 58 has been provided. On some a pocket has been provided for storing versions this desk can be used as a read- tickets. ing desk by lifting its back and placing it on the dashboard as illustrated in the figure. A

IN AN Some vehicle versions feature the sun vi- On versions equipped with an airbag on EMERGENCY sor with a mirror on the passenger’s side. F0T0135m the passenger’s side the desk is stationary. fig. 60 REAR SIDE WINDOWS WITH “COMPASS” OPENING fig. 59 AND CARE MAINTENANCE WARNING To open the rear side windows proceed as follows: Never use the writing desk in ❒ vertical position when tra- move lever A-fig. 60 outwards until velling. the window opens completely; TECHNICAL ❒ SPECIFICATIONS push the lever backwards until the win- dow clicks in position. To close the windows carry out the op- erations above in reverse order until you INDEX hear the click indicating correct lever po- sitioning. 58 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 59

DOORS SIDE SLIDING DOORS (for versions/markets, where provided) CENTRAL DOOR DASHBOARD LOCKING/UNLOCKING SYSTEM AND CONTROLS WARNING Door locking from the outside Before opening a door, en- sure that you can do it in The doors will be locked only if all doors safe conditions. SAFETY are closed. If one or more than one door is open after the button on the remote fig. 61 F0T0242m control Á is pressed, the direction indica- tors start flashing quickly for approx. 3 sec- Door unlocking from the outside STARTING onds. When the metal insert is turned Before refuelling, make sure AND DRIVING clockwise in the driver’s door lock all the Press the button Æ briefly to unlock all that the right-hand sliding doors can be locked. the doors, switch on the ceiling lights in door is locked. If it is not, the a timed manner and flash the direction in- door and the sliding block sys- Quickly double click the button Á on the WARNING dicators. All the doors are unlocked by MESSAGES

tem may be damaged when the fuel LIGHTS AND remote control to activate the dead lock turning the metal insert in the door lock flap is opened during refuelling oper- device (see paragraph “Dead lock de- on the driver’s side anticlockwise. ations. vice”). IN AN EMERGENCY WARNING While refuelling, if the flap is open, the right-hand side

sliding door cannot be opened. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

59 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 60

The side sliding door is supplied with a spring loaded latch that stops the door at the end of its stroke during opening. Block the door by simply pushing it to the end DASHBOARD AND CONTROLS of its stroke; release it by pulling forwards A with energy. In any case, make sure that the door is SAFETY properly hooked to the system which keeps the door fully open. fig. 62 F0T0209m fig. 63 F0T0197m

STARTING STARTING Opening/closing from outside

AND DRIVING WARNING When the vehicle is parked To open: turn the metal insert of the key on a slope, do not block the in the lock and pull handle A-fig. 62 as sliding door open: any accidental illustrated by the arrow. Then, let the WARNING MESSAGES door slide to the back of the vehicle until LIGHTS AND shock may release the door, thus leaving it free to move forward. the latch stopping the door at the end of its stroke. To close: use handle A-fig. 62 and push IN AN the door to the front of the vehicle. Turn EMERGENCY fig. 64 F0T0137m WARNING the key metal insert in position as if to lock the door. Before leaving the vehicle Opening/closing from inside parked with sliding doors

AND CARE open, always check that the latch is To open: press the device A-fig. 63 to MAINTENANCE engaged. release the door. Then, pull the lever A-fig. 64 and let the door slide to the back of the vehicle until the latch stops it.

TECHNICAL To close: press the device A-fig. 63 to SPECIFICATIONS release the door and let it slide to the front of the vehicle. INDEX

60 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 61

CHILD RESTRAINT SYSTEM fig. 65 This device prevents opening of the side DASHBOARD

sliding doors from the inside. AND CONTROLS It is engaged only when the side sliding door is open. ❒ Position 1 - engaged (door locked); SAFETY ❒ Position 2 - disengaged (door can be F0T0139m opened from inside). fig. 66

The device stays on even if the doors are TWO-SIDED REAR STARTING unlocked by the central electric system. SWING-DOORS fig. 66 AND DRIVING (for versions/markets, where provided) Two-sided rear swing-doors are supplied WARNING MESSAGES

with a spring loaded system that stops LIGHTS AND them during opening with an approx. an- gle of 90 degrees. fig. 65 F0T0138m IN AN WARNING EMERGENCY Always use this device when transporting children. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

61 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 62 DASHBOARD AND CONTROLS SAFETY

fig. 66/a F0T0375m fig. 67 F0T0140m fig. 68 F0T0060m

STARTING STARTING To open them wider to an angle of 180 Opening/closing the AND DRIVING degrees, push the locking device A-fig. first side from outside 66/a (one on each side) as shown in the To open the first side turn the key metal diagram and simultaneously open the ∞ doors. insert in the lock or press button on WARNING MESSAGES

LIGHTS AND the remote control. Then, pull the lever A-fig. 67 as illustrated by the arrow. To close the first side turn the key metal WARNING insert in the closing direction or press but- IN AN ton Á on the remote control. EMERGENCY This spring loaded system F0T0142m has activation forces which fig. 69 were designed for optimised comfort. Accidental shocks or a strong wind- Emergency opening of blast may release the springs and let WARNING first door side from inside AND CARE

MAINTENANCE the door sides close spontaneously. While closing, first lock the Pull the lever A-fig. 68 from inside the ve- right-hand door side 2-fig. 66 hicle. followed by the left-hand door side 1-fig. 66. Do not close the two sides Opening the second door side TECHNICAL simultaneously. SPECIFICATIONS First, open the first side. Then, pull lever A-fig. 69 as illustrated by the arrow.

INDEX IMPORTANT Exclusively pull the lever A-fig. 69 in the direction shown in the figure. 62 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 63

WINDOW WINDERS WARNING Incorrect use of the power FRONT POWER WINDOWS windows may be dangerous. DASHBOARD (for versions/markets, where provided) Before operation, always check that AND CONTROLS no passenger is exposed to the risk of being injured directly by the moving Buttons fig. 70 have been provided on the window or by objects getting caught driver’s door panel to control the follow- in or dragged by the window. SAFETY ing functions with the ignition turned to MAR: fig. 70 F0T0044m A: opening/closing of left-hand window;

IMPORTANT If the anti-crush function is WARNING STARTING B: opening/closing of right-hand window. AND DRIVING enabled for 5 times within 1 minute, the When leaving the vehicle, al- Press buttons A or B to open/close the system automatically switches to “recov- ways remove the ignition key desired window. ery” mode (self-protection). This condi- to avoid the risk of injury due to ac- tion is highlighted by upward jogging of the

cidental operation of the power win- WARNING MESSAGES When one of these buttons is pressed window while closing. LIGHTS AND shortly, the window “jogs”; when pressed dows. for long, continuous automatic window In this case, it is necessary to carry out the lifting or lowering is engaged. The window system restore procedure as follows: stops in the required position when but- ❒ open the windows; IN AN ton A or B is pressed again. FRONT MANUAL EMERGENCY or The power windows are fitted with a safe- WINDOW WINDERS ty system (for versions/markets, where ❒ turn the ignition key to STOP and then Some versions feature manual window provided) that detects the presence of an to MAR. winders. AND CARE

obstacle during window closing and cuts MAINTENANCE in by stopping and reversing the window If no malfunction is present, the window To open/close, operate the handle. stroke. returns to its normal operation automat- ically.

IMPORTANT With ignition key in STOP TECHNICAL position or removed, the power windows SPECIFICATIONS remain activated for about 2 minutes and are deactivated immediately as soon as a

door is opened. INDEX

63 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 64

BOOT

BOOT OPENING DASHBOARD AND CONTROLS FROM OUTSIDE The tailgate (when unlocked) can only be A opened from outside using the powered A SAFETY handle A-fig. 71 located beneath the shackle. If doors are unlocked the boot can be fig. 71 F0T0250m fig. 72 F0T0285m opened at any time.

STARTING STARTING EMERGENCY OPENING AND DRIVING To open it, one of the front doors shall be WARNING FROM INSIDE opened or doors shall be unlocked using If you travel in areas with the remote control or the key without re- In case of emergency the boot can be few filling stations and you mote control. opened from inside the vehicle as de- want to transport fuel in a spare tank, WARNING MESSAGES

LIGHTS AND scribed below. respect applicable laws and exclu- ❒ sively use a type-approved suitably Open the sliding side door and fold the secured tank. However, the risks in rear seats over completely; case of collision increase.

IN AN ❒ working inside the luggage compart- EMERGENCY ment, press lever A-fig. 72 and open the tailgate. WARNING

AND CARE Never exceed the maximum

MAINTENANCE allowed load in the boot (see section “Technical Specifications”). Make sure that the objects are well arranged in the boot so that they will

TECHNICAL not be projected forwards following SPECIFICATIONS sudden braking. INDEX

64 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 65

A DASHBOARD A E AND CONTROLS B D SAFETY

fig. 73 F0T0061m fig. 74 F0T0062m fig. 76 F0T0287m

REMOVING THE REAR STARTING

WARNING AND DRIVING WINDOW SHELF Under no circumstances The rear window shelf fig. 73 consists of should the rear seat be used two parts. To remove it proceed as fol- with the backrest tipped for carrying WARNING MESSAGES

lows: cargos or luggage. The cargo may LIGHTS AND A crash against the backrest of the front ❒ open the luggage compartment tailage, A A seats, thus causing serious injury to lift up the front section A-fig. 74 re- passengers. leasing the pin A-fig. 75 from the hous- ing B-fig. 76; IN AN fig. 75 F0T0063m EMERGENCY ❒ lift the rear section B-fig. 74 releasing the pins B and C-fig. 75 from the hous- ings D and E-fig. 76; If the seat is completely folded, remove

the rear window shelf as described above AND CARE

and position it between the backrests of MAINTENANCE the front seats and the tipped rear seat. The rear window shelf is fit back into place by carrying out the operations described TECHNICAL

above in reverse order. SPECIFICATIONS INDEX

65 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 66

A DASHBOARD AND CONTROLS

B SAFETY

fig. 77 F0T0288m fig. 79 F0T0066m fig. 81 F0T0290m

STARTING STARTING Versions with one-piece rear seat AND DRIVING A To extend the luggage compartment fur- B ther, pull the tab A-fig. 78 behind the rear seat backrest and fold the seat and back- WARNING MESSAGES rest forwards fig. 79. LIGHTS AND

Versions with split rear seat

IN AN To extend the luggage compartment fur-

EMERGENCY F0T0065m F0T0289m ther, pull the tabs A and B-fig. 80 behind fig. 78 fig. 80 the rear seat backrests and fold the seats and backrests forwards fig. 81. EXPANDING THE BOOT ❒ move the seat belt sideways and check that it is stretched and presents no Note The one-piece and split seats have AND CARE Proceed as follows: circlips on the rear edge of the cushion for

MAINTENANCE twisting; ❒ open the luggage compartment tailgate ❒ attaching the seat to the front seat head and remove the rear parcel shelf (see raise lever A-fig. 77 retaining the back- restraint rods when it is folded over. description in previous paragraph); rest and fold it forwards to create an even load compartment. The raising of

TECHNICAL ❒ lower the rear seat head restraints all the lever is shown by a “red band” B; SPECIFICATIONS the way down; INDEX

66 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 67

1 DASHBOARD

3 AND CONTROLS

2 SAFETY

fig. 83 F0T0302m fig. 84 F0T0058m

REPOSITIONING ANCHORING THE CARGO STARTING

A A AND DRIVING THE REAR SEAT fig. 84 Proceed as follows: For easier cargo fastening, eyebolts have been supplied on the boot floor (varying ❒ check that the seat belt is correctly fit- WARNING MESSAGES

in number according to versions). LIGHTS AND ted in the corresponding bracket; ❒ bring the seat cushion back in horizon- tal position and make sure that it is

properly secured; IN AN

F0T0291m EMERGENCY fig. 82 ❒ tip the backrest backwards and make sure that it is properly secured. REMOVING REAR SEAT There is a diagram (fig. 83) under the split

When bulky cargos need to be carried, the seat cushion illustrating the reattachment AND CARE loading compartment can be further ex- to the brackets bolted onto the floor. MAINTENANCE panded by removing the rear seat. After having folded the rear seat as de-

scribed previously, adjust the two brack- TECHNICAL

ets A-fig. 82 located at the side under the SPECIFICATIONS seat (one on each side). INDEX

67 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 68

BONNET B OPENING THE BONNET DASHBOARD AND CONTROLS Proceed as follows: A ❒ pull lever A-fig. 85 in the direction in-

SAFETY dicated by the arrow; ❒ pull the lever B-fig. 86 and lift the bon- net; fig. 85 F0T0045m fig. 88 F0T0283m ❒ lift the engine hood;

STARTING STARTING CLOSING THE BONNET AND DRIVING ❒ lift the engine hood support lever A- fig. 87 and accompany it until it snaps Proceed as follows: into position. ❒ lift the hood with one hand and with the other pull toward you the device A- WARNING MESSAGES LIGHTS AND fig. 88 and then lower the lever B; ❒ WARNING lower the hood to approximately 20 centimetres from the engine compart-

IN AN Before lifting the bonnet, ment, then let it drop, ensuring, trying

EMERGENCY check that windscreen wiper fig. 86 F0T0067m to lift it, that it is fully closed, not just arm is not lifted from the windscreen. hooked in safety position. In the latter case do not press on the hood, lift it again and repeat the operation.

AND CARE A MAINTENANCE TECHNICAL SPECIFICATIONS

fig. 87 F0T0216m INDEX

68 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 69

12 ROOF RACK/SKI RACK

CLACK = OK PREPARING THE DASHBOARD

ATTACHMENTS AND CONTROLS PUSH TO OPEN 1 2 Attachments are located in points A and B-fig. 90. F0Q0603m SAFETY

PULL TO CLOSE LONGITUDINAL BARS fig. 91 (for versions/markets, where provided) fig. 89 F0T0215m fig. 90 F0T0278m Some versions of the vehicle feature two

IMPORTANT A label with a description longitudinal bars that can be used for car- STARTING of the above engine hood opening/closing rying different types of objects (e.g. skis, AND DRIVING operations is located under the engine windsurf, etc…) with the addition of spe- hood (see fig. 89). cific accessories. WARNING MESSAGES LIGHTS AND

WARNING WARNING The bonnet must always be Strictly adhere to the laws in perfectly closed during trav- force concerning maximum IN AN el for safety reasons. Make sure that clearance. fig. 91 F0T0208m EMERGENCY the bonnet is perfectly closed and that the lock is engaged. If you dis- cover that the bonnet is not perfect- WARNING

ly closed during travel, stop immedi- AND CARE

Check that the attachment MAINTENANCE ately and close the bonnet in the cor- fastening screws are correct- rect manner. Divide the cargo uniformly and consider higher vehicle sensi- ly positioned after a few kilometres. tivity to side wind during trav-

el. TECHNICAL SPECIFICATIONS Do not exceed the maximum loads allowed in the boot (see

section “Technical Specifica- INDEX tions”). 69 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 70

HEADLIGHTS FOG LIGHT AIMING DEVICE (for versions/markets, where provided) DIRECTING THE BEAM Contact the Fiat Dealership to have the DASHBOARD

AND CONTROLS fog lights checked and properly adjusted. Correct direction of the headlights is es- sential for the comfort and safety of the REGULATING THE BEAMS driver and the other road users. To en- ABROAD SAFETY sure the best visibility conditions during travel with the headlights on the vehicle Dipped beams factory adjustment depends must have beams aimed correctly. Con- fig. 92 F0T0037m on the country where the vehicle is pur- tact the Fiat Dealership to have the head- chased. In countries driving on the left, the lights checked and properly adjusted. beams are aimed by affixing a purposeful- STARTING STARTING Headlight aiming device regulation ly studied adhesive film in order not to AND DRIVING HEADLIGHT AIMING DEVICE To adjust, press buttons Ò and  fig. 92 dazzle the vehicles travelling in the oppo- on the control panel. site direction. This adhesive film is pro- This device works with the key at MAR vided in Lineaccessori Fiat and is available and the dipped beam headlights on. The display located on the instrument pan- at the Fiat Dealership. WARNING MESSAGES LIGHTS AND The vehicle slants backwards when it is el provides a visual indication of the posi- loaded, raising the beam. The beams must tions during adjustment operations. therefore be directed again in this case. Position 0 - one or two passengers on

IN AN front seats. EMERGENCY Position 1 - five passengers. Position 2 - five passengers + loaded boot. AND CARE

MAINTENANCE Position 3 - driver + maximum admitted cargo in the boot. IMPORTANT Check beam aiming when- ever the weight of the load carried TECHNICAL

SPECIFICATIONS changes. INDEX

70 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 71

ABS SYSTEM ABS SYSTEM INTERVENTION WARNING Intervention of the ABS is detected by a The ABS system exploits the The vehicle is fitted with an ABS braking slight pulsing of the brake pedal accompa- tyre-road grip at best, but it

system, which prevents the wheels from DASHBOARD

nied by noise: such an event indicates that cannot improve it. Therefore, you AND CONTROLS locking when braking, makes the most of you need to adjust your speed to the type should take great care when driving road grip and gives the best control when of road on which you are travelling. on slippery surfaces without taking emergency braking under difficult road unnecessary risks. conditions. SAFETY The system is completed by EBD (Elec- tronic Braking Force Distribution), which distributes the braking action between WARNING front and rear wheels. When the ABS cuts in, and FAILURE INDICATIONS STARTING IMPORTANT To achieve maximum effi- you feel the brake pedal pul- AND DRIVING ciency of the braking system, a running- sating, do not remove your foot, but ABS failure in period of about 500 km is required. keep it pressed; in doing so you will During this time, avoid sudden, repeated stop in the shortest amount of space ABS failure is indicated by the turning on WARNING > MESSAGES and prolonged braking. possible depending on the current of warning light on the instrument pan- LIGHTS AND road conditions. el (together with the dedicated message on the display in some versions) (see sec- tion “Warning lights and messages”). IN AN

In the case, the braking system preserves EMERGENCY WARNING its efficiency, but cannot rely on the ex- When the ABS trips, it means tra potentials offered by the ABS system. that you are approaching Drive carefully to the nearest Fiat Deal- ership to have the system checked. the grip limit between tyres and road: AND CARE slow down to exploit all the available MAINTENANCE grip. TECHNICAL SPECIFICATIONS INDEX

71 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 72

EBD failure BRAKE ASSIST ESP SYSTEM EBD failure is indicated by the turning on (emergency braking assistance (Electronic Stability of warning lights > and x on the instru- integral with ESP)

DASHBOARD (for versions/markets, where provided) Program)

AND CONTROLS ment panel (together with the dedicated message on the display in some versions) The system, which cannot be cut out, rec- (for versions/markets, where provided) (see section “Warning lights and mes- ognizes emergency braking (on the ground sages”). of the brake pedal operation speed) and The ESP system is an electronic system SAFETY In this case, the rear wheels may sudden- considerably increases the pressure in the controlling the car stability in the event of ly lock and the vehicle may swerve. Dri- brake circuit thus supporting the driver to tyre grip loss. ve carefully to the nearest Fiat Dealership obtain prompt and effective braking. The ESP system is therefore particularly to have the system checked. Brake Assist is deactivated on the versions useful when grip conditions of the road sur- STARTING STARTING equipped with ESP, in the event of ESP sys- faces changes. AND DRIVING á tem failure (indicated by warning light In addition to the ESP system, ASR system switching on together with the message and Hill Holder, (for versions/markets, WARNING on the multifunction display, for ver- where provided) also the MSR system (ad- sions/markets, where provided). WARNING MESSAGES LIGHTS AND If warning light x only lights justing the engine braking torque) and the up on the instrument panel HBA system (improving the braking force (with a message on the display in during emergency braking) are provided. some versions), immediately stop the IN AN vehicle and go to the nearest Fiat WARNING ABS SYSTEM INTERVENTION EMERGENCY Dealership. Leakage of hydraulic flu- When the ABS cuts in, and It is signalled by the blinking of the warn- id from the braking system jeopardis- you feel the brake pedal pul- ing light á on the instrument panel, to in- es the functionality of the braking sys- sating, do not remove your foot, but form the driver that the car is in critical tem, either of the conventional type keep it pressed; in doing so you will stability and grip conditions. AND CARE or with ABS. stop in the shortest amount of space MAINTENANCE possible under the current road con- ditions. TECHNICAL SPECIFICATIONS INDEX

72 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 73

ESP SYSTEM ACTIVATION HILL HOLDER SYSTEM FAILURE INDICATIONS The ESP system is automatically activat- This system is an integral part of the ESP System failure is indicated by the turning ed when the car is started and cannot be system and it is provided to facilitate start- on of warning light * on the instrument DASHBOARD

de-activated. ing on slopes. panel with digital display and warning light AND CONTROLS á on the instrument panel with multi- It will activate automatically with the fol- FAILURE INDICATIONS function display (for versions/markets, lowing conditions: where provided) (see section “Warning In the event of failure, the ESP system is ❒ uphill: vehicle stationary on a road with lights and messages”). SAFETY automatically disconnected, the warning a gradient of more than 5%, engine run- light á, comes on with fixed light on the IMPORANT The Hill Holder system is not ning, brake pressed and gearbox in neu- a parking brake therefore, never leave the instrument panel, together with the mes- tral or gear other than reverse engaged; sage on the multifunction display (for ver- car without having engaged the handbrake,

sions/markets, where provided) (see sec- ❒ downhill: vehicle stationary on a road turned the engine off and engaged the first STARTING tion “Warning lights and messages”) and with a gradient of more than 5%, engine speed. AND DRIVING with the button led ASR OFF. In this case running, brake pressed and reverse gear contact a Fiat Dealership as soon as pos- engaged. sible. WARNING At pickup the ESP system control unit will MESSAGES keep brake force on wheels until reaching WARNING LIGHTS AND the torque suitable for starting, or in any For correct operation of the case for max. 2 seconds in order to pass ESP and ASR systems, the WARNING easily from the brake pedal to the accel- tyres must absolutely be of the same IN AN

Performance of the ESP sys- erator pedal. brand and type on all wheels, in per- EMERGENCY tem, in terms of active safe- After two seconds without starting, the fect conditions and, above all, of ty should not induce the driver to take system will deactivate automatically by re- type, brand and size specified. pointless and unnecessary risks. The leasing gradually the brake force.

style of driving must in any case al- AND CARE ways be adapted to the conditions of At releasing, the typical brake disengage- MAINTENANCE the road surface, visibility and traffic. ment noise indicating that the car is go- Road safety is always the driver’s re- ing to move will be heard. sponsibility. TECHNICAL SPECIFICATIONS INDEX

73 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 74

ASR SYSTEM (Antislip Regulator) WARNING The ASR function controls car drive and For correct operation of the cuts in automatically every time one or ESP and ASR systems, the DASHBOARD

AND CONTROLS both driving wheels slip. tyres must absolutely be of the same According to slipping conditions, two dif- brand and type on all wheels, in per- ferent control systems are activated: fect conditions and, above all, of type, brand and size specified. SAFETY ❒ if slipping involves both driving wheels, the ASR function intervenes reducing the power transmitted by the engine; fig. 93 F0M0317m ❒ if the slipping involves only one driving

STARTING STARTING wheel, the ASR system cuts in auto- MSR system (engine braking AND DRIVING matically braking the wheel that is slip- torque control) When the ASR is switched off this is ping. shown by the lighting up of the led on the It is an integral part of the ASR system that button and by relevant message on the The action of the ASR is particularly help- in case of sudden gear shifting, cuts in pro- multifunction display, for versions/mar- WARNING MESSAGES ful in the following circumstances: LIGHTS AND viding torque to the engine thus prevent- kets, where provided. ❒ slipping of the inner wheel due to the ing excessive driving wheel drive that, spe- If the ASR is switched off when travelling, effect of dynamic load changes or ex- cially in poor grip conditions, can lead to it will turn on again automatically the next cessive acceleration; loss of stability. time the engine is started. IN AN

EMERGENCY ❒ too much power transmitted to the Switching the system on/off When travelling on snowy roads with wheels also in relation to the conditions snow chains, it may be helpful to turn the of the road surface; The ASR system switches on automatically ASR off: in fact, in these conditions, slip- each time the engine is started. ping of the driving wheels when moving off ❒ acceleration on slippery, snowy or

AND CARE When travelling, the ASR can be switched makes it possible to obtain better drive.

MAINTENANCE frozen surfaces; off and on again pressing button A - fig. 93 ❒ in the case of loss of grip on a wet sur- set on the dashboard. face (aquaplaning). TECHNICAL SPECIFICATIONS INDEX

74 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 75

WARNING TRACTION PLUS The performance of the sys- SYSTEM tem, in terms of active safe-

(for versions/markets, where provided) DASHBOARD

ty should not induce the driver to take AND CONTROLS pointless and unnecessary risks. The style of driving must in any case al- Traction Plus is a help with driving and set- ways be adapted to the conditions of ting off in poor grip conditions (snow, ice, the road surface, visibility an traffic. mud, etc.) which allows the drive force to SAFETY Road safety is always the driver’s re- be evenly distributed over the same axle when both wheels are slipping. sponsibility. fig. 94 F0M0311m In effect, Traction Plus acts by braking the wheels with poor grip (or those slipping Traction Plus operation STARTING more than the others), thereby transfer- AND DRIVING For correct operation of the ASR system, ring the drive force to those which have The system is deactivated when starting the tyres must absolutely be of the same more grip on the ground. up. To activate the Traction Plus system, brand and type on all wheels, in perfect press the T+ button (fig. 94): the LED in This function can be turned on manually

conditions and, above all, of type, brand WARNING the button will come on. MESSAGES and size specified. by pressing the T+ button located in the LIGHTS AND dashboard (fig. 94) and operates The activation of the Traction Plus system FAILURE INDICATIONS involves the following functions being swit- below a threshold of 30 km/h. When this ched on: In the event of malfunctioning, the ASR speed is exceeded, it is automatically de- IN AN ❒ EMERGENCY system is automatically disconnected and activated (the LED in the button remains inhibition of the ASR function, in order the warning light á will come with fixed on) and it is reactivated as soon as the to fully exploit the engine torque; speed goes below the level of 30 km/h. light on the instrument panel together ❒ differential lock effect on the front ax- with the message on the multifunction dis- le, via the braking system, to improve AND CARE

play, for versions/markets, where provid- drive on uneven surfaces. MAINTENANCE ed, (see section “Warning lights and mes- If this is a problem with the Traction Plus sages”). In this case contact Fiat Dealer- á ship as soon as possible. system the warning light in the instru- ment panel will come on constantly. TECHNICAL SPECIFICATIONS INDEX

75 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 76

EOBD SYSTEM The system also has a diagnostic connector WARNING that can be interfaced with appropriate Go to a Fiat Dealership as The EOBD system (European On Board tools, which makes it possible to read the error codes stored in the control unit to- soon as possible if warning DASHBOARD Diagnosis) allows continuous diagnosis of U AND CONTROLS gether with a series of specific parameters light does not light up when the emission-related components of the vehi- key is turned to MAR or if, during cle. It also alerts the driver, by switching for engine operation and diagnosis. U travel, the warning light comes on ei- on of the warning light on the instru- This check can also be carried out by the ther steady or blinking (along with a SAFETY ment panel (together with relevant mes- traffic police. message on the display). The opera- sage on the display in some versions) U IMPORTANT After eliminating the prob- tion of the warning light may be when these components are no longer in checked by the traffic police using peak conditions (see section “Warning lem, to check the system completely, Fi- at Dealerships are obliged to run a bench specific devices. Follow the laws in lights and messages”). force in the country where you are

STARTING STARTING test and, if necessary, road tests which AND DRIVING The objective of this system is: may also call for a long journey. driving. ❒ to keep the system efficiency under control; WARNING MESSAGES ❒

LIGHTS AND to warn about increased emissions due to a vehicle malfunction; ❒ to warn of the need to replace deteri- orated components. IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

76 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 77

PARKING SENSORS Detection distances (for versions/markets, where provided) Central operating range 120 cm Parking sensors are located in the rear Side operating range 60 cm DASHBOARD bumper fig. 95 and their function is to in- AND CONTROLS form the driver, through an intermittent If several obstacles are detected, the con- buzzer, about the presence of obstacles trol unit indicates the nearest one.

behind the vehicle. SAFETY FAILURE INDICATIONS ACTIVATION fig. 95 F0T0211m Any failure of the parking sensors is indi- The sensors are automatically activated cated when engaging reverse gear by a when the reverse gear is engaged. beep lasting 3 seconds. BUZZER WARNING STARTING AND DRIVING As the obstacle behind the vehicle comes When reverse gear is engaged, an inter- closer to the bumper, the buzzer becomes mittent buzzer automatically turns on (a more frequent. short beep to indicate the activation of the The sensors must be clean WARNING system). MESSAGES from mud, dirt, snow or ice in LIGHTS AND The beep: order to work correctly. Be careful not to scratch or dam- ❒ becomes louder as the vehicle goes age the sensors while cleaning them. closer to the obstacle; Avoid using dry, rough or hard cloths. IN AN EMERGENCY ❒ becomes continuous when the distance Wash the sensors with clean water with between the vehicle and the obstacle is the addition of car shampoo, if neces- inferior to 30 cm and stops immediately sary. In washing stations, clean sensors if the distance increases; quickly keeping the vapour jet/high pressure washing nozzles at 10 cm at AND CARE ❒ is constant if the distance between the least from the sensors. MAINTENANCE vehicle and the obstacle does not change. TECHNICAL SPECIFICATIONS INDEX

77 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 78

OPERATION GENERAL WARNINGS WARNING WITH TRAILER ❒ When parking, take the utmost care to The driver is fully responsible Parking sensor operation is automatically obstacles that may be set above or un- for parking operations and DASHBOARD

AND CONTROLS disabled when the electric cable plug of the der the sensors. other dangerous manoeuvres. Make trailer is fitted into the vehicle tow hook ❒ Objects located near the vehicle back, sure that no-one is standing in the socket. under certain circumstances, are not area, especially children or animals. Parking sensors are designed to assist

SAFETY detected and could therefore cause Sensors are automatically enabled again drivers, who must always pay the ut- when removing the trailer cable plug. damage to the vehicle or become dam- aged. most attention during potentially dangerous manoeuvres even if they ❒ Indications sent by the sensors can be are performed at low speed. altered by dirt, snow or ice deposited STARTING STARTING

AND DRIVING on the sensors or by ultrasound sys- tems (e.g. truck pneumatic brakes or pneumatic hammers) near the vehicle. ❒ For correct parking sensor operation WARNING MESSAGES LIGHTS AND the swing-doors must be closed. Open swing-doors may produce incorrect in- dications by the system. The rear doors must always be closed. IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

78 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 79

SOUND SYSTEM EXTRA EQUIPMENT (for versions/markets, where provided) The system consists of: ❒

sound system power supply cables; DASHBOARD

For the operation of the radio with CD/MP3 AND CONTROLS CD (for versions/markets, where provided), ❒ front loud speakers cables (positioned read the instructions for use given in the on the panels of the rear door mirrors); Supplement attached to the Owner Hand- ❒ loud speakers cables on front door pan- SAFETY book. els; BASIC EQUIPMENT ❒ rear loud speakers cables (positioned fig. 96 F0T0032m alongside the rear window shelf) (for The system consists of: versions/markets, where provided); INSTALLING THE STARTING ❒ sound system power supply cables; ❒ 2 tweeters positioned on the panels of SOUND SYSTEM AND DRIVING the rear door mirrors; ❒ front speakers cables (positioned on the The sound system must be installed in place panels of the rear door mirrors); ❒ 2 midwoofers on front door bottom; of the central box. This operation makes the WARNING MESSAGES

prepared cables available for connection. LIGHTS AND ❒ loud speakers cables on front door pan- ❒ 2 rear loud speakers (positioned along- els; side the rear window shelf) (for ver- To remove the central box press the ❒ rear loud speakers cables (positioned sions/markets, where provided); tongues A-fig. 96.

alongside the rear window shelf) (for ❒ sound system housing; IN AN

versions/markets, where provided)); EMERGENCY ❒ aerial power supply cable; ❒ sound system housing; WARNING ❒ aerial. ❒ aerial power supply cable. For connection to the exist-

ing devices supplied in the AND CARE vehicle contact Fiat Dealership to MAINTENANCE prevent any trouble that could impair vehicle safety. TECHNICAL SPECIFICATIONS INDEX

79 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 80

ELECTRICAL/ELECTRONIC RADIO TRANSMITTERS VEHICLE REFUELLING DEVICES INSTALLATION AND MOBILE PHONES Radio transceiver equipment (vehicle mo- PETROL ENGINES DASHBOARD AND CONTROLS Electrical and electronic devices installed bile phones, CB radios, amateur radio and Use unleaded petrol only with octane after buying the vehicle by after-market similar equipment) shall not be used inside number (R.O.N.) not lower than 95. service must carry the following label: the vehicle unless a separate aerial is mounted on the roof. IMPORTANT An inefficient catalyst leads SAFETY to harmful exhaust emissions, thus con- IMPORTANT The use of similar devices tributing to air pollution. inside the passenger compartment (with- out separated aerial) produces radio-fre- IMPORTANT Never use leaded petrol, quency electromagnetic fields which, am- even in small amount or in an emergency,

STARTING STARTING plified by the resonance effects inside the as this would damage the catalyst beyond AND DRIVING repair. Fiat Auto S.p.A. authorises the installation passenger compartment, may cause mal- of transceiving devices provided that they functioning of the electrical systems in- are installed by a specialised centre ac- stalled on the vehicle. This could com- promise safety in addition to constituting

WARNING cording to rules of good engineering prac- MESSAGES LIGHTS AND tice in compliance with the manufacturer’s a potential hazard for the passengers. indications. In addition, and reception of IMPORTANT Traffic police may not allow these devices may be affected by the IN AN the vehicle on the road if devices are in- shielding effect of the vehicle body. EMERGENCY stalled which imply modifications of the As concerns officially EC-approved mobile vehicle features. This may also cause the phones (GSM, GPRS, UMTS), strictly com- warranty to become null and void in re- ply with the instructions for use provided lation to faults caused by the change or re- by the manufacturer of the mobile phone.

AND CARE lated to the change either directly or in- MAINTENANCE directly. Fiat Auto S.p.A. shall not be liable for dam- age caused by the installation of acces-

TECHNICAL sories either not supplied or recom- SPECIFICATIONS mended by Fiat Auto S.p.A. and/or not in- stalled in compliance with the provided in- structions. INDEX

80 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 81

DIESEL ENGINES For diesel engines, use diesel A Operation at low temperatures fuel for motor vehicles com- pliant with EN590 European

If the outside temperature is very low, the DASHBOARD specifications only. The use of C AND CONTROLS diesel thickens due to the formation of other products or mixtures may dam- paraffin clots with consequent anomalous age the engine beyond repair and con- operation of the fuel supply system. sequently cause lapse of warranty in In order to avoid these problems, different relation to the damage caused. If you SAFETY types of diesel are distributed according to accidentally introduce other types of the season: summer type, winter type and fuel in the tank, do not start the engine fig. 97 F0T0068m arctic type (cold, mountain areas). If refu- and empty the tank. If the engine has elling with diesel fuel whose features are not run also for a very short time, you will FUEL TANK PLUG fig. 97 STARTING suitable to the temperature of use, it is ad- need to have the entire fuel feed sys- AND DRIVING visable to mix TUTELA DIESEL ART addi- tem emptied in addition to the tank. tive in the proportions shown on the con- Opening tainer with the fuel. Pour the additive in- 1) Open the flap A - fig. 97 pulling it out- WARNING to the tank before the fuel. MESSAGES wards, keep the cap B still, insert the ig- LIGHTS AND When using or parking the vehicle for a REFUELLING CAPACITY nition key in the lock and turn it anti- long time in the mountains or cold areas, clockwise. To fill the tank completely, top-up twice it is advisable to refuel using locally avail- 2) Turn the cap anti-clockwise and extract able fuel. after the pump switches off. Further top- IN AN ups could cause faults in the fuel feeding it. The cap has a device C retaining it to EMERGENCY In this case, it is also advisable to keep the system. the flap so it cannot be lost. When refill- tank over 50% full. ing, attach the cap to the flap, as illustrat- ed. AND CARE

Closing MAINTENANCE 1) Fit the cap (complete with key) and turn it clockwise until it clicks once or more.

2) Turn the key clockwise and extract it, TECHNICAL then close the flap. SPECIFICATIONS INDEX

81 036-082 QUBO GB 1ed:_ 3-12-2009 11:55 Pagina 82

The hermetic seal may cause a slight in- ENVIRONMENTAL DIESEL PARTICULATE crease in pressure in the tank. A suction FILTER DPF noise when you release the cap is there- PROTECTION (Diesel Particulate Filter) fore entirely normal. DASHBOARD (for versions/markets, where provided) AND CONTROLS The devices for curtailing emissions are the following: The Diesel Particulate Filter is a mechan- ❒ three-way catalytic converter; ical filter integral with the exhaust system that physically traps carbon particles pre- SAFETY Do not place free flames or lit ❒ Lambda sensors; sent in the exhaust gases of Diesel engines. cigarettes near to the fuel filler: this may pose a risk of ❒ fuel evaporation prevention system. The diesel particulate filter has been fire. Keep your face away adopted to eliminate particulates almost from the fuel filler to prevent breath- In addition, do not let the engine run, even totally in compliance with current / future STARTING STARTING ing in harmful vapours. for a test, with one or more spark plugs law regulations. During normal use of the AND DRIVING disconnected. vehicle, the engine control unit records a The devices for curtailing diesel fuel en- set of data (e.g.: travel time, type of route, gine emissions are the following: temperatures, etc.) and it will then calcu- late the amount of particles trapped by the WARNING MESSAGES LIGHTS AND ❒ oxidising catalytic converter; filter. ❒ exhaust gas recirculation system Since this filter physically traps particulates, (E.G.R.); it shall be cleaned (reclaimed) at regular IN AN ❒ diesel particulate filter (DPF) (where intervals by burning carbon particles. The EMERGENCY provided). regeneration procedure is controlled au- tomatically by the engine control unit ac- cording to the filter conditions and the conditions of use of the vehicle. AND CARE

MAINTENANCE During the regeneration procedure, the following situations may occur: limited in- crease of idle speed, activation of electric fan, limited increase of smoke, high tem-

TECHNICAL peratures at the exhaust. These events

SPECIFICATIONS must not be considered as a malfunction- ing: they do not impair vehicle behaviour and the environment. If the dedicated message is displayed, refer to section INDEX “Warning lights and messages”. 82 083-100 QUBO GB 1ed:083-100 Fiorino GB 1ed 3-12-2009 11:58 Pagina 83

SSAAFFEETTYY

SEAT BELTS ...... 84 DASHBOARD AND CONTROLS S.B.R. SYSTEM ...... 85 PRETENSIONERS ...... 86 CARRYING CHILDREN SAFELY ...... 89 SAFETY ISOFIX CHILD RESTRAINT ASSEMBLY SETUP ...... 93 FRONT AIRBAGS ...... 96 STARTING STARTING

SIDE BAGS ...... 98 AND DRIVING WARNING MESSAGES LIGHTS AND IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

83 083-100 QUBO GB 1ed:083-100 Fiorino GB 1ed 3-12-2009 11:58 Pagina 84

SEAT BELTS The rear seat is fitted with inertial seat belts with three anchor points and reel. USING THE SEAT BELTS DASHBOARD AND CONTROLS Wear the belt keeping the chest straight and rested against the backrest. WARNING Remember that in the event

SAFETY To fasten the seat belts, hold the tongue of a violent collision, rear A-fig. 1 and insert it into the buckle B, seat passengers that do not wear the until the locking click is heard. seat belt both pose a risk for their fig. 1 F0T0147m If the seat belt jams while it is removed, safety and represent a serious danger let it rewind for a short stretch, then pull for the front seat passengers. STARTING STARTING

AND DRIVING it out again without jerking. WARNING Press button C to release the belt. Ac- Never press button C-fig. 1 company the belt while it is being re- when travelling. wound to prevent twisting. WARNING MESSAGES LIGHTS AND

Through the reel, the belt automatically adapts to the body of the passenger wear- IN AN ing it, allowing freedom of movement. EMERGENCY The reel may block when the vehicle is parked on a steep slope: this is perfectly normal. In addition, the reel mechanism blocks the belt whenever it is pulled and AND CARE

MAINTENANCE in the event of brisk braking, collisions and on high speed bends. TECHNICAL SPECIFICATIONS INDEX

84 083-100 QUBO GB 1ed:083-100 Fiorino GB 1ed 3-12-2009 11:58 Pagina 85

S.B.R. SYSTEM

A The vehicle is provided with a Seat Belt

Reminder (S.B.R.) system, which warns DASHBOARD the driver and the front passenger if the AND CONTROLS seat belt is not buckled, as follows: B ❒ warning light < turns on steady and a buzzer keeps on playing for the first 6 SAFETY seconds; F0T0193m F0T0288m fig. 2 fig. 3 ❒ warning light < blinks and a buzzer plays intermittently for the next 90 sec- IMPORTANT After putting the seats back onds; STARTING in their travel position, restore the seat AND DRIVING belt position to make them ready for use. For permanent deactivation, contact the Fiat Dealership. The S.B.R. system can also be reset WARNING MESSAGES through the setup menu. LIGHTS AND

WARNING IN AN

fig. 2a - 4 seater multi F0T0342m Make sure the backrest is EMERGENCY transporter versions properly secured on both sides (red bands B not visible) to pre- The rear seat belts must be used as shown vent it from moving forward in the

in the diagram in fig. 2 or fig. 2a. event of sharp braking, which may AND CARE cause injuries to passengers. MAINTENANCE IMPORTANT The backrest is correctly secured when the “red band” B-fig. 3 on the backrest lowering levers A disappears.

This red band indicates that the backrest TECHNICAL is not secured. SPECIFICATIONS INDEX

85 083-100 QUBO GB 1ed:083-100 Fiorino GB 1ed 3-12-2009 11:58 Pagina 86

PRETENSIONERS The pretensioner does not require any maintenance or greasing. Anything that Operations which lead to knocks, vibrations or localised To increase the efficiency of the front seat modifies its original conditions invalidates its efficiency. If due to unusual natural heating (over 100°C for a DASHBOARD belts, the vehicle is fitted with preten- AND CONTROLS events (floods, sea storms, etc.) the device maximum of 6 hours) in the sioners. These devices, in the event of a area around the pretensioners may violent front and side crash, rewind the has been affected by water and mud, it must necessarily be replaced. cause damage or trigger them. These seat belts a few centimetres. In this way devices are not affected by vibrations SAFETY they ensure that the seat belt perfectly ad- caused by irregularities of the road sur- heres to the wearer before the restrain- face or low obstacles such as kerbs, etc. ing action begins. Contact a Fiat Dealership for any as- The seat belt locks to indicate that the de- sistance. vice has tripped; the seat belt cannot be STARTING STARTING

AND DRIVING drawn back up even when guiding it man- WARNING ually. The pretensioner can only be IMPORTANT To obtain the highest de- used once. Go to a Fiat Deal- gree of protection from the action of the ership to have it replaced after is has WARNING MESSAGES LIGHTS AND pretensioning device, wear the seat belt been deployed. The expiration date keeping it firmly close to the chest and of the device is shown on the label in pelvis. the oddment compartment. Refer to the FIAT Dealership when it is time to

IN AN A small amount of smoke may be pro- replace the device.

EMERGENCY duced. This smoke is in no way toxic and presents no fire hazard. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

86 083-100 QUBO GB 1ed:083-100 Fiorino GB 1ed 3-12-2009 11:58 Pagina 87

LOAD LIMITERS (for versions/markets, where provided) To increase passengers’ safety in the event DASHBOARD of an accident, the front and rear seat belt AND CONTROLS reels (for versions/markets, where pro- vided) have been provided with a load lim- iter which allows controlled sag in such a way as to dose the force acting on the SAFETY chest and shoulders during the belt re- straining action in the event of a front fig. 4 F0T0003m fig. 5 F0T0004m crash.

GENERAL INSTRUCTIONS IMPORTANT The belt must not be twist- STARTING FOR USING THE SEAT BELTS ed. The upper part must cross the shoul- AND DRIVING der and the chest diagonally. The lower The driver is responsible for respecting part must fit the hips (as shown in fig. 5) (and ensuring that all the other vehicle rather than the abdomen of the passen- WARNING MESSAGES passengers also respect) the local laws in ger. Do not use devices (clips, etc.) to hold LIGHTS AND force regarding the use of seat belts. Al- the seat belt away from your body. ways fasten the seat belts before starting off. Seat belts must also be worn by pregnant IN AN women: wearing the seat belt significant- EMERGENCY ly reduces the risk for both the expectant mother and the baby in the event of an ac- cident. Pregnant women must position the AND CARE

lower part of the belt very low down so MAINTENANCE that it passes under the abdomen (see fig. 4). TECHNICAL SPECIFICATIONS INDEX

87 083-100 QUBO GB 1ed:083-100 Fiorino GB 1ed 3-12-2009 11:58 Pagina 88

WARNING SEAT BELTS MAINTENANCE For maximum safety, keep the back of your seat up- Observe the following: DASHBOARD AND CONTROLS right, lean back into it and make sure ❒ the seat belt fits closely across your always use the belt with the tap well chest and hips. Always fasten the seat stretched and never twisted; make sure belts on both the front and the rear that it is free to run without impedi- SAFETY seats. Travelling without seat belts ments; fastened increases the risk of serious ❒ replace the belt after an accident of a injuries or even death in the event of fig. 6 F0T0005m certain severity even if it does not ap- a crash. pear damaged. Always replace the belt Under no circumstances should the if the pretensioners were deployed. STARTING STARTING IMPORTANT Each seat belt may only be AND DRIVING seat belt and pretensioner compo- ❒ nents be removed or tampered with. used by a single person: do not carry chil- To clean the belt, wash by hand with All interventions must be performed dren on your lap with one seat belt pro- water and mild soap, rinse and leave to by qualified and authorised person- tecting both fig. 6. In general, do not place dry in the shade. Do not use strong de- any objects between the person and the tergents, bleach, paints or any other

WARNING nel only. Always go to a Fiat Dealer- MESSAGES LIGHTS AND ship. belt. substance which could damage the belt fibres. ❒ Keep the reels dry: correct operation IN AN WARNING may only be ensured if the reels are dry. EMERGENCY If the belt has been subject- ❒ Replace the seat belt when showing sig- ed to heavy stress, for exam- nificant wear or cut signs. ple after an accident, it should be changed completely together with AND CARE

MAINTENANCE the anchors, anchor fastening screws and the pretensioners. In fact, even if the belt has no visible defects, it could have lost its resilience. TECHNICAL SPECIFICATIONS INDEX

88 083-100 QUBO GB 1ed:083-100 Fiorino GB 1ed 3-12-2009 11:58 Pagina 89

CARRYING The research results in relation to the best All restraint devices must bear the type- protection for children is illustrated in Eu- approval data along with the control mark CHILDREN SAFELY ropean standard CEE-R44 which divides on a label that must be firmly secured to the restraint systems into five groups in the child seat and must never be removed. DASHBOARD For optimal protection in the event of a addition to making their use compulsory: AND CONTROLS crash, all passengers must be seated and Over 1.50 m in height, from the point of wear adequate restraint systems. Group 0 up to 10 kg in weight view of restraint systems, children are considered as adults and have to wear the This is even more important for children. Group 0+ up to 13 kg in weight standard seat belts. SAFETY This prescription is compulsory in all EC Group 1 9-18 kg in weight Lineaccessori Fiat includes child restraint countries according to EC Directive Group 2 15-25 kg in weight systems for each weight group. These de- 2003/20/EC. vices are recommended as they have been Group 3 22-36 kg in weight A child’s head is larger and heavier in pro- specifically designed for Fiat cars/vehicles. STARTING portion to his/her body and the child’s As it may be noted, the groups overlap AND DRIVING muscular and bone structures are not ful- partly and, in fact, in commerce it is pos- ly developed. For this reason, they require sible to find devices that cover more than restraint systems which are different from one weight group. WARNING MESSAGES those used by adults to protect them in LIGHTS AND the event of an accident. IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

89 083-100 QUBO GB 1ed:083-100 Fiorino GB 1ed 3-12-2009 11:58 Pagina 90

WARNING SEVERE DANGER: Do not arrange child seats facing DASHBOARD

AND CONTROLS backwards on the front seat if the passenger’s airbag is on. Deployment of the airbag in the event of a shock could cause fa- SAFETY tal injuries to the baby. It is advisable to carry children on the rear seat, which is the most protected position fig. 7 F0T0006m fig. 8 F0T0007m in the event of an accident. Child seats must not be fitted on the front STARTING STARTING GROUP 0 and 0+ GROUP 1

AND DRIVING seat of vehicles provided with a pas- senger’s airbag, whose deployment in Babies up to 13 kg must be carried facing From 9 kg to 18 kg in weight, children may an accident could cause fatal injuries backwards on a cradle seat, which, sup- be carried facing forwards seated on child to the baby regardless of how severe porting the head, does not induce stress seats fitted with a front cushion. With

WARNING the shock causing airbag deployment MESSAGES on the neck in the event of sharp decel- these seats the vehicle seat belt is used LIGHTS AND is. If necessary, children can sit on the eration. to restrain both child and seat, fig. 8. front seat in vehicles where the pas- senger’s airbag can be disabled. Ver- The cradle is restrained by the vehicle seat belts, as shown in fig. 7 and in turn it must

IN AN ify that the airbag is actually deacti- “ restrain the child with its own belts. EMERGENCY vated, observing the warning light WARNING on the dashboard (see “Front airbag The figures are indicative for - passenger’s side” in paragraph assembly purposes only. Re- “Front airbags”). Move the passen- fer to the instructions supplied with ger’s seat as far back as possible to AND CARE the child seat. MAINTENANCE avoid contact between the child seat and the dashboard. TECHNICAL SPECIFICATIONS INDEX

90 083-100 QUBO GB 1ed:083-100 Fiorino GB 1ed 3-12-2009 11:58 Pagina 91

WARNING Some child restraint systems for weight groups 0 and 1 DASHBOARD

have a rear attachment and seat belts AND CONTROLS for securing the child. Due to their weight, they may be dangerous if in- correctly mounted (e.g. if fastened to the vehicle seat belts placing a cush- SAFETY ion in between). Follow the assembly instructions carefully. fig. 9 F0T0008m fig. 10 F0T0009m

GROUP 2 GROUP 3 STARTING AND DRIVING Children from 15 to 25 kg may use the ve- For children from 22 kg to 36 kg the size hicle seat belts directly fig. 9. of the child’s chest no longer requires a support to space the child’s back from the The child seat is only needed to position WARNING seat back. MESSAGES the child correctly with respect to the LIGHTS AND belts so that the diagonal section crosses Fig. 10 shows proper child seat posi- the child’s chest and never the neck and is tioning on the rear seat. Children over snug on the hips and not the abdomen. 1.50 m in height can wear seat belts like adults. IN AN EMERGENCY

WARNING

The figures are indicative for AND CARE

assembly purposes only. Re- MAINTENANCE fer to the instructions supplied with the child seat. TECHNICAL SPECIFICATIONS INDEX

91 083-100 QUBO GB 1ed:083-100 Fiorino GB 1ed 3-12-2009 11:58 Pagina 92

PASSENGER SEAT COMPLIANCE WITH REGULATIONS ON CHILD’S SEAT USE The vehicle complies with the new European Directive 2000/3/EC which governs the arrangement possibilities for child restraints on the seats of a vehicle as shown in the following table. DASHBOARD AND CONTROLS

SAFETY Group Weight ranges Front Passenger Rear Passenger

Group 0, 0+ up to 13 kg U U STARTING STARTING

AND DRIVING Group 1 9-18 kg U U

Group 2 15-25 kg U U WARNING MESSAGES

LIGHTS AND Group 3 22-36 kg U U

Key: IN AN

EMERGENCY U = suitable for child restraint systems of the “Universal” category, according to European Standard EEC-R44 for the specified “Groups”. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

92 083-100 QUBO GB 1ed:083-100 Fiorino GB 1ed 3-12-2009 11:58 Pagina 93

Below is a summary of the safety ❒ Always check the seat belt is well fas- ISOFIX CHILD rules to be followed for carrying chil- tened by pulling the belt. dren. RESTRAINT ❒ Only one child is to be strapped to each

❒ ASSEMBLY SETUP DASHBOARD Install the child seats on the rear seat, retaining system. AND CONTROLS which is the most protected position in ❒ (for versions/markets, where provided) the event of an accident. Always check the seat belts do not fit around the child’s throat. ❒ Provision has been made on the vehicle If the passenger’s airbag is deactivated, ❒ SAFETY always check the warning light “ on the While travelling, do not let the child sit for mounting a Universal Isofix child re- instrument panel to make sure that it incorrectly or release the belts. straint system, a new European standard- has actually been deactivated. ❒ Never carry children on your lap, even ised system for carrying children safely. ❒ Carefully follow the instructions sup- newborns. No-one can hold a child in Isofix systems can be mounted simultane- the event of an accident. ously with a traditional restraint system. STARTING plied with the child restraint system AND DRIVING which are mandatory by law. Keep the ❒ In the event of an accident, replace the An example of child seat is shown in instructions in the vehicle along with child’s seat with a new one. fig. 11. The Universal Isofix child seat cov- the other papers and this handbook. Do ers weight group: 1. WARNING

not use child seats without instructions. MESSAGES The other weight groups are covered by LIGHTS AND WARNING specific Isofix child seats, which can be used only if specifically designed, tested Do not arrange child seats on and type-approved for this vehicle (see ve- the front seat in vehicles fit- hicle list provided with the child seat). IN AN ted with a passenger’s airbag. Chil- EMERGENCY dren must never travel on the front seat. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

93 083-100 QUBO GB 1ed:083-100 Fiorino GB 1ed 3-12-2009 11:58 Pagina 94 DASHBOARD AND CONTROLS SAFETY B B fig. 12 F0T0145m fig. 13 F0T0284m

STARTING STARTING Remember that only Universal Isofix child AND DRIVING seats bearing the type-approval text “ECE WARNING R44/03 Universal Isofix” can be used. Fit the child seat when the vehicle is stationary. The Universal Isofix “Duo Plus” child seat is child seat is correctly anchored to the WARNING MESSAGES available from Lineaccessori Fiat. LIGHTS AND brackets when you hear the click. Fol- For any further details regarding installa- low the instructions for assembly, dis- tion/use, refer to the “Instructions Man- assembly and positioning that the ual” that must be provided by the Manu- manufacturer must supply with the IN AN facturer of the child restraint system. child seat. EMERGENCY fig. 11 F0T0010m

As a result of the different attachment sys- tem, the child seat must be secured using AND CARE

MAINTENANCE the special lower metal rings A-fig. 12 lo- cated between the rear cushion and back- rest then, after having removed the rear parcel shelf, fasten the upper belt (avail-

TECHNICAL able together with the child seat) to the SPECIFICATIONS special ring B-fig. 13 (one on each side) located behind the rear seat backrest. INDEX

94 083-100 QUBO GB 1ed:083-100 Fiorino GB 1ed 3-12-2009 11:58 Pagina 95

PASSENGER SEAT COMPLIANCE WITH REGULATIONS ON UNIVERSAL ISOFIX CHILD SEAT USE The table below shows the different installation possibilities of Isofix restraint systems on seats fitted with Universal Isofix fasten- ers in compliance with European standard ECE 16. DASHBOARD AND CONTROLS

Direction of Class of Isofix position Weight group child seat Isofix size rear side SAFETY Group 0 up to 10 kg Facing backwards E IL Facing backwards E IL STARTING STARTING

Group 0+ up to 13 kg Facing backwards D IL AND DRIVING Facing backwards C IL (*)

Facing backwards D IL WARNING MESSAGES LIGHTS AND Facing backwards C IL (*) Group I from 9 Facing forwards B IUF up to 18 kg IN AN Facing forwards B1 IUF EMERGENCY Facing forwards A IUF AND CARE IUF: suitable for Isofix child restraint systems to be set facing forwards, universal class (fitted with third upper fastener), approved MAINTENANCE for the relevant weight group. IL: suitable for special child restraint systems, specific Isofix type, and type-approved for this type of vehicle. The seat can be in-

stalled by moving the front seat forward. TECHNICAL SPECIFICATIONS (*) The Isofix child seat can be installed by positioning the front seat all the way up. INDEX

95 083-100 QUBO GB 1ed:083-100 Fiorino GB 1ed 3-12-2009 11:58 Pagina 96

FRONT AIRBAGS In the event of a collision, a person not WARNING wearing the seat belt may be thrown for- Do not apply stickers or oth- The vehicle is provided with front airbags ward and come into contact with the bag before it has fully opened. The protection er objects on the steering DASHBOARD for the driver and the passenger (for ver- AND CONTROLS wheel, on the dashboard (in passen- sions/markets, where provided). offered by the bag is reduced in such a case. ger side airbag area) and on the seats. Do not place objects (e.g. cell phones) FRONT AIRBAGS Front airbags may not be activated in the on the passenger’s side dashboard be- SAFETY following situations: The front airbags on both the driver’s and cause these could interfere with cor- passenger’s side (for versions/markets, ❒ in front collisions against highly de- rect deployment of the passenger’s where provided) have been designed to formable objects which do not affect airbag and cause severe injury to ve- protect the occupants in the event of the front surface of the vehicle (e.g. hicle occupants.

STARTING STARTING head-on crashes of medium-high severity, bumper collision against guard rail, etc.); AND DRIVING by placing the bag between the occupant ❒ and the steering wheel or dashboard. vehicle penetration under other vehi- cles or protective barriers (e.g. trucks Non-deployment of the airbags in other or guard rails); The front airbags on the driver’s and pas- senger’s sides are designed and calibrated

WARNING types of collisions (side collisions, rear MESSAGES LIGHTS AND shunts, roll-overs, etc.) does not neces- they could not provide any additional pro- to protect the front seat passengers who sarily indicate a system malfunction. tection compared with seat belts, so their wear safety belts. deployment would be improper. In these An electronic control unit causes the bag cases non-deployment of the airbag does The volume of the front airbags at max. IN AN to inflate in the event of a front crash. not necessarily indicate a system malfunc- inflation fills most of the space between EMERGENCY tion. the steering wheel and the driver and be- The bag will inflate instantaneously placing tween the dashboard and the passenger. itself between the front occupant’s body and the structures which could cause in- The airbags are not deployed in the event jury. It will deflate immediately afterwards. of front collisions of low severity (for AND CARE

MAINTENANCE which the withholding action of the seat Driver and passenger front airbags (for belts is sufficient). Safety belts must always versions/markets, where provided) are be worn. In the event of a front crash they not a replacement of, but complementary ensure the correct positioning of the oc- to, the seat belts, which you are recom-

TECHNICAL cupant.

SPECIFICATIONS mended to always wear as specified by law in Europe and most non-European coun- tries. INDEX

96 083-100 QUBO GB 1ed:083-100 Fiorino GB 1ed 3-12-2009 11:58 Pagina 97

FRONT AIRBAG ON MANUAL DEACTIVATION PASSENGER’S SIDE fig. 15 OF FRONT AIRBAG ON (for versions/markets, where provided) PASSENGER’S SIDE AND SIDE

BAG FOR BREAST/PELVIS DASHBOARD It consists of an instant-inflating bag con- AND CONTROLS tained into a special recess in the dash- PROTECTION board: this bag has a bigger volume than (for versions/markets, where provided) that of the driver.

Whenever a child needs to be carried on SAFETY the front seat, the passenger’s front airbag and the Side Bag for breast and pelvis pro- fig. 14 F0T0052m tection (for versions/markets, where pro- WARNING vided) must be deactivated.

Do not arrange child seats “ STARTING The warning light on the instrument AND DRIVING facing backwards if the pas- panel stays on steady until reactivating the senger’s front airbag is on. De- passenger’s front airbag and the Side Bag ployment of the airbag in the (for versions/markets, where provided). event of an accident could WARNING MESSAGES cause fatal injuries to the baby. Always IMPORTANT To deactivate the passen- LIGHTS AND deactivate the passenger’s airbag ger’s front airbag and the Side Bag (for ver- when placing a child seat on the front sions/markets, where provided), refer to seat. Move the passenger’s seat as far paragraphs “Digital display” and “Multi- back as possible to avoid contact be- functional display” in section “Dashboard IN AN fig. 15 F0T0033m tween the child seat and the dash- and controls”. EMERGENCY board. Although this is not mandato- FRONT AIRBAG ON ry by law, the airbag should be imme- DRIVER’S SIDE fig. 14 diately reactivated when children are no longer carried to ensure better pro- AND CARE It consists of an instant-inflating bag con- tection to adults. MAINTENANCE tained in a special recess in the centre of the steering wheel. TECHNICAL SPECIFICATIONS INDEX

97 083-100 QUBO GB 1ed:083-100 Fiorino GB 1ed 3-12-2009 11:58 Pagina 98

SIDE BAGS SIDE BAGS fig. 16 (for versions/markets, where provided) (for versions/markets, where provided) It consists of an instant-inflating bag DASHBOARD AND CONTROLS Some versions have front side bags on housed in the front seat backrest. It pro- both the driver’s and passenger’s sides. tects the chest and the hips of the pas- sengers in the event of side crashes of Side bags protect vehicle occupants from medium-high severity. SAFETY side crashes of medium-high severity, by placing the bag between the occupant and IMPORTANT In the event of a side crash, the internal parts of the side structure of the system provides best protection if the the vehicle. passenger sits on the seat in a correct po- sition, thus allowing correct side bag de-

STARTING STARTING Non-deployment of side bags in other ployment. AND DRIVING types of collisions (front collisions, rear shunts, roll-overs, etc...) does not neces- IMPORTANT Do not wash the seats with sarily indicate a system malfunction. water or pressurised steam (by hand or at automatic seat washing stations). An electronic control unit causes the bags WARNING MESSAGES LIGHTS AND to inflate in the event of a frontal crash. The bags inflate instantaneously placing themselves between the front occupant’s body and the structures which could cause IN AN injury. They deflate immediately after- EMERGENCY wards. fig. 16 F0T0180m

Side bags are not a replacement of, but complementary to, the seat belts, which AND CARE

MAINTENANCE you are always recommended to wear, as specified by law in Europe and in most non-European countries. For this reason, the seat belt must be TECHNICAL worn at all times. During side collisions SPECIFICATIONS the seat belts hold the occupant in the correct position and prevent ejection from the vehicle during very violent colli-

INDEX sions.

98 083-100 QUBO GB 1ed:083-100 Fiorino GB 1ed 3-12-2009 11:58 Pagina 99

GENERAL WARNINGS If the vehicle is scrapped, have the airbag WARNING system deactivated at a Fiat Dealership The front airbags and/or side bags (for ver- first. If the vehicle is sold to a new owner, The expiry dates of the py- sions/markets, where provided) are de- the new owner must be informed on how rotechnic charge and spiral DASHBOARD ployed also if the vehicle is subject to the airbags work along with the above contact are shown in the plate in- AND CONTROLS strong collisions involving the underbody warnings, and also be given this “Owner stalled inside the oddment compart- area, such as violent shocks against steps, Handbook”. ment. When these dates are near, go kerbs or low obstacles, falling of the ve- to the Fiat Dealership for replace- hicle in big holes or sags in the road. Pretensioners, front airbags and front side ment of these components. SAFETY bags are deployed differently according to A small amount of dust will be released the type of collision. Non-deployment of when the airbags are deployed. The dust one of these devices does not therefore is not harmful and does not indicate the indicate a system fault. beginning of a fire. Furthermore, the sur- WARNING STARTING face of the deployed bag and the interior AND DRIVING of the vehicle may be covered with resid- Do not travel holding objects ual dust. This dust may irritate the skin and on your lap, opposite the the eyes. Wash with mild soap and water WARNING breast, holding a pipe, pencil, etc. in WARNING ¬ your lips. Airbag deployment after a MESSAGES in the event of exposure. If the warning light does LIGHTS AND not turn on or if it stays on collision could cause serious dam- Should an accident occur in which any of when travelling (together with the age/injury. the safety devices is activated, take the ve- message on the multifunctional dis-

hicle to a Fiat Dealership to have the de- play, where provided) when turning IN AN

ployed devices replaced and to have the the key to MAR, there could be a fail- EMERGENCY system integrity checked. ure in the restraint systems. If this is All checking, repair and replacement op- the case, the airbags or pretensioners erations concerning the airbags must on- do not trigger in the event of an im-

ly be carried out c/o Fiat Dealership. pact or, in a minor number of cases, AND CARE they may trigger accidentally. Do not MAINTENANCE drive the vehicle and contact a Fiat Dealership to have the system imme- diately checked. TECHNICAL SPECIFICATIONS INDEX

99 083-100 QUBO GB 1ed:083-100 Fiorino GB 1ed 3-12-2009 11:58 Pagina 100

WARNING WARNING WARNING When the ignition key is in When the ignition key is The airbag does not replace and turned in the MAR posi- turned to MAR, the warning seat belts, but increases their DASHBOARD AND CONTROLS tion and the engine is off, the airbags light ¬ turns on (front airbag on pas- efficiency. Furthermore, since front may deploy if the vehicle is crashed by senger’s side enabled) and blinks for airbags are not deployed after low another moving vehicle. For this rea- a few seconds to remind that the pas- speed collisions, side collisions, rear- son, children must never sit on the senger airbag will activate in the end shunts or roll-overs, the vehicle SAFETY front seat, even if the vehicle is not event of a collision. Then it turns off. occupants are only protected by the moving. We remind you that if the key seat belts, which must be fastened at is inserted and turned in the STOP po- all times. sition, no safety device (airbag or pre- tensioner) activates following a colli- STARTING STARTING WARNING

AND DRIVING sion. Non-deployment in such cases must not be considered as the sign of The front airbags deploy in a malfunction. the event of more severe col- lisions than those required for de-

WARNING ploying the pretensioners. When the MESSAGES LIGHTS AND shock is within the two deployment thresholds, it is normal that preten- WARNING sioners only are engaged. If the vehicle is stolen or an IN AN

EMERGENCY attempt is made to steal it, if it is subject to criminal attacks or flooding, have the airbag system checked by the Fiat Dealership. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

100 101-108 QUBO GB 1ed:101-110 Fiorino GB 1ed 2-12-2009 9:22 Pagina 101

SSTTAARRTTIINNGG AANNDD DDRRIIVVIINNGG

ENGINE STARTING ...... 102 DASHBOARD AND CONTROLS HANDBRAKE ...... 104 USING THE GEARBOX ...... 105 CONTAINING RUNNING COSTS...... 106 SAFETY TOWING TRAILERS...... 107 SNOW TYRES...... 107 STARTING STARTING

SNOW CHAINS ...... 108 AND DRIVING PROLONGED VEHICLE INACTIVITY ...... 108 WARNING MESSAGES LIGHTS AND IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

101 101-108 QUBO GB 1ed:101-110 Fiorino GB 1ed 2-12-2009 9:22 Pagina 102

ENGINE START-UP ENGINE STARTING When the engine is switched off, never leave the ignition PROCEDURE FOR The vehicle is provided with an electron- key in the MAR position to PETROL VERSIONS

DASHBOARD ic engine lock device: refer to “The Fiat AND CONTROLS prevent pointless current ab- Proceed as follows: CODE system” paragraph in the section sorption from draining the battery. “Dashboard and controls” if the engine ❒ ensure that the handbrake is up; will not start. ❒ put the gear lever into neutral; SAFETY The engine may be noisier during the first ❒ seconds of operation, particularly after a WARNING press the clutch pedal all the way down without touching the accelerator; long period of inactivity. This does not im- It is dangerous to have the pair engine operation and reliability, and is engine running indoors. The ❒ turn the ignition key to AVV and let it typical of hydraulic tappets: the distribu- STARTING STARTING engine depletes oxygen and dis- go the moment the engine starts. AND DRIVING tion system for the petrol engine of your charges carbon dioxide, carbon vehicle has been selected to minimise monoxide and other toxic gases. If the engine does not start at the first at- maintenance. tempt, return the ignition key to STOP before repeating starting. WARNING MESSAGES LIGHTS AND If with the ignition key on MAR the warn- ing light Y remains lit together with WARNING It is advisable not to demand warning light U, turn the key to STOP maximum performance from Remember that the servo- and then back to MAR; if the warning light IN AN your vehicle (e.g. excessive brake and electric power remains on, try with the other keys pro- EMERGENCY accelerations, long distances steering are not operational until the vided with the vehicle. engine is started. Therefore, more ef- at top rpm, excessive intense braking, If the engine still will not start, perform an etc.) as soon as the engine is started. fort than usual is required on the brake pedal and steering wheel. emergency start (see “Emergency start” in section “In an emergency”) and then AND CARE

MAINTENANCE contact a Fiat Dealership. TECHNICAL SPECIFICATIONS INDEX

102 101-108 QUBO GB 1ed:101-110 Fiorino GB 1ed 2-12-2009 9:22 Pagina 103

ENGINE START-UP If the engine does not start at the first at- WARMING THE PROCEDURE FOR tempt, return the ignition key to STOP ENGINE IMMEDIATELY AFTER DIESEL VERSIONS before repeating starting. START-UP DASHBOARD Proceed as follows: If with the ignition key on MAR, the in- Proceed as follows: AND CONTROLS strument panel warning light Y remains ❒ ensure that the handbrake is up; on, turn the key to STOP and then back ❒ drive off slowly, letting the engine turn at medium speed. Do not accelerate ❒ put the gear lever into neutral; to MAR; if the warning light remains on, try with the other keys provided with the abruptly; SAFETY ❒ turn the ignition key to MAR: the vehicle. ❒ m do not demand maximum performance warning light will come on in the for the first few kilometres. Wait until instrument panel. Contact the Fiat Dealership if the engine still will not start. the engine coolant gauge starts moving. ❒ Y m wait until the warning lights and STARTING turn off. The hotter the engine, the EMERGENCY IGNITION AND DRIVING quicker this will happen; Go to a Fiat Dealership immediately if an ❒ press the clutch pedal all the way down The warning light m blinks instrument panel warning light Y aremains without touching the accelerator; for 60 seconds after starting WARNING on constantly. MESSAGES or during prolonged cranking LIGHTS AND ❒ turn the ignition key to AVV as soon m to indicate a fault to the glow as the warning light turns off. Wait- plug heating system. Use the vehicle ing too long will waste the work done

normally if the engine starts, but con- IN AN by the glow plugs. Never jump start the engine

tact the Fiat Dealership as soon as pos- EMERGENCY Release the key as soon as the engine sible. by pushing, towing or driving starts. downhill. This could cause a flow of fuel into the catalyt- IMPORTANT When the engine is cold, ic converter and damage it beyond re-

rotate the ignition key to AVV to com- pair. AND CARE pletely release the accelerator pedal. MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

103 101-108 QUBO GB 1ed:101-110 Fiorino GB 1ed 2-12-2009 9:22 Pagina 104

STOPPING THE ENGINE HANDBRAKE Turn the ignition to STOP while the en- gine is idling. The handbrake lever is located between

DASHBOARD the two front seats. AND CONTROLS IMPORTANT After a demanding drive, you should allow the engine to “catch its Pull the lever upwards until the vehicle is breath” before turning it off by letting it blocked to operate the handbrake.

SAFETY idle to allow the temperature in the en- gine compartment to fall. WARNING fig. 1 F0T0043m The vehicle must be braked

STARTING STARTING A quick burst on the acceler- after a few snaps of the PARKING THE VEHICLE AND DRIVING ator before turning off the en- lever, otherwise, contact the Fiat Proceed as follows: gine serves absolutely no Dealership for regulation. practical purpose, it wastes ❒ stop the engine and engage the hand- fuel and is damaging especially to tur- brake; WARNING MESSAGES LIGHTS AND bocharged engines. ❒ engage a gear (on a slope, engage first When the handbrake lever is pulled up gear if the vehicle faces uphill or reverse and the ignition key is on MAR, the in- if it faces downhill) and leave the wheels

IN AN strument panel warning light x will turn steered.

EMERGENCY on. If the vehicle is parked on a steep slope, Proceed as follows to release the hand- it is advisable to further block the wheels brake: with a wedge or stone.

AND CARE ❒ slightly lift the handbrake and press the Do not leave the ignition key on MAR to MAINTENANCE release button A-fig. 1; prevent draining the battery. Always re- ❒ hold button A pressed and lower the move the key when you leave the vehi- lever. Warning light x on the instru- cle.

TECHNICAL ment panel will go out. Never leave children unattended in the ve- SPECIFICATIONS Press the brake pedal when carrying out hicle. Always remove the ignition key this operation to prevent the vehicle from when leaving the vehicle and take it out moving accidentally. with you. INDEX

104 101-108 QUBO GB 1ed:101-110 Fiorino GB 1ed 2-12-2009 9:22 Pagina 105

USING THE GEARBOX CONTAINING RUNNING COSTS To engage the gears, press the clutch ped-

al fully and shift the gear lever A-fig. 2 DASHBOARD Here are some useful tips to save fuel and AND CONTROLS into one of the required positions (the di- fig. 2 minimize polluting emissions of CO2 and agram is shown on the knob ). other pollutants (nitric oxide, unburnt hy- IMPORTANT Reverse may only be en- drocarbons, fine dusts etc…). gaged when the vehicle is at a standstill. SAFETY With the engine running, wait for at least GENERAL REMARKS 2 seconds with the clutch pedal fully fig. 2 F0T0055m pressed before engaging reverse to pre- Vehicle maintenance vent damage to the gears and grating. Have checks and adjustments carried out STARTING in accordance with the “Scheduled Service AND DRIVING Do not drive with your hand Plan”. resting on the gear lever as WARNING the force exerted, even if Tyres WARNING MESSAGES Press the clutch pedal fully slight, could lead to prema- LIGHTS AND ture wear on the gearbox internal com- Check tyre pressure regularly at least to shift the gears correctly. once every four weeks: excessively low For this reason, there must be no ob- ponents over time. The clutch pedal must be used for gear shift only. Nev- pressure will increase consumption be-

stacles on the floor under the pedals: IN AN er drive with the foot resting, even if cause rolling resistance will be higher. make sure that the mats are always EMERGENCY slightly, on the clutch pedal. For ver- flat and do not interfere with the ped- Unnecessary loads als. sions/markets, where provided the clutch pedal control electronics can in- Do not travel with an overloaded boot. tervene interpreting the wrong drive

The weight of the vehicle (especially when AND CARE style as a fault. driving in town) and its trim greatly affect MAINTENANCE fuel consumption and stability. TECHNICAL SPECIFICATIONS INDEX

105 101-108 QUBO GB 1ed:101-110 Fiorino GB 1ed 2-12-2009 9:22 Pagina 106

Roof rack/ski rack DRIVING STYLE Acceleration Remove the roof rack or the ski rack from Starting Sudden acceleration has a very negative the roof after use. These accessories de- effect on consumptions and emissions: ac-

DASHBOARD Do not warm the engine up with the ve- AND CONTROLS crease aerodynamic penetration of the ve- celerate gradually. hicle and have a negative effect on fuel hicle running at min. or max. rpm: the en- consumption. It is better to use a trailer gine warms up very slowly in these con- to transport particularly bulky objects. ditions, increasing consumption and emis-

SAFETY sions. It is advisable to start off immedi- ately and slowly keeping the engine speed CONDITIONS OF USE Electric devices down: the engine will warm up much Cold starting Use electric devices only for the amount faster this way. of time needed. The rear heated window, Short distances and frequent cold start-

STARTING STARTING additional headlights, windscreen wipers Unnecessary manoeuvres ups will prevent the engine from reach- AND DRIVING and heater fan need a considerable ing optimal running temperature. amount of energy, therefore increasing fu- Avoid revving up when starting at traffic lights or before stopping the engine. The Consequently, both consumption (from el consumption (up to +25% in the urban +15 to +30% on urban cycle ) and emis- cycle). latter manoeuvre, like doubling the clutch, WARNING MESSAGES sions will increase. LIGHTS AND is unnecessary and causes increased fuel consumption and pollution. Climate control Traffic and road conditions The climate control system leads to high- Gear selection Quite high consumption is caused by IN AN er fuel consumption (up to +20% on av-

EMERGENCY Use a higher gear as soon as traffic and road heavy traffic, for instance when travelling erage): use air vents only when the ex- in a queue with frequent use of low gears ternal temperature allows it. conditions allow. Using a low gear for faster acceleration will increase consumption. or in cities with many traffic lights. Moun- tain and rough roads also have a negative Spoilers In the same way improper use of a high gear effect on consumption. AND CARE

MAINTENANCE increases fuel consumption, emissions and The use of non-certified spoilers may ad- engine wear. versely affect air drag and fuel consump- Traffic hold-ups tion levels. Top speed During prolonged hold-ups (e.g. level cross- ings) the engine should be switched off. TECHNICAL

SPECIFICATIONS Fuel consumption considerably increases as speed increases. Keep your speed as uni- form as possible, avoiding unnecessary braking and acceleration which cause ex- INDEX cessive fuel consumption and increase emis- sions. 106 101-108 QUBO GB 1ed:101-110 Fiorino GB 1ed 2-12-2009 9:22 Pagina 107

TOWING TRAILERS Respect the speed limits specific for each SNOW TYRES country for vehicles towing trailers. In all cases, the top speed must not exceed 80 Use snow tyres type 185/65 R15 only (see IMPORTANT NOTES km/h. paragraph “Tyres” in section “Technical DASHBOARD AND CONTROLS The vehicle must be provided with a type- specifications”). approved tow hitch and adequate electri- The Fiat Dealership will be happy to pro- cal system to tow caravans or trailers. In- vide advice concerning the most suitable WARNING SAFETY stallation must be performed by specialised type of tyre for customer’s requirements. personnel who will issue the required pa- The ABS with which the ve- pers for travelling on roads. hicle may be equipped will For the type of snow tyre to be used, in- not control the braking system of the flation pressures and specifications, follow Install any specific and/or additional rear- trailer. Particular caution is required the instructions given in paragraph “Tyres” view mirrors as specified by law. in section “Technical specifications”. STARTING on slippery roads. AND DRIVING Remember that when towing a trailer, The winter performance of these tyres is steep hills are harder to climb, the braking considerably reduced when the tread thick- spaces increase and overtaking takes longer ness is less than 4 mm. Replace them in this

depending on the overall weight of the trail- WARNING MESSAGES

case. LIGHTS AND er. WARNING Never modify the braking Due to their specific features, the perfor- Engage a low gear when driving downhill, system of the vehicle to con- mance of snow tyres is much lower than rather than constantly using the brake. trol the trailer brake. The trailer brak- that of standard tyres in normal conditions IN AN

The weight of the trailer on the vehicle tow ing system must be fully independent or long motorway stretches. Use them ex- EMERGENCY hitch will reduce the loading capacity of the from the hydraulic system of the ve- clusively according to the performance vehicle by the same amount. hicle. levels for which they were type-approved. Consider the weight of the vehicle at full IMPORTANT When snow tyres are used load, including accessories and luggage to with a max speed index below the one AND CARE make sure you do not exceed the maxi- that can be reached by the vehicle (in- MAINTENANCE mum towable weight (shown on the reg- creased by 5%), place a notice in the pas- istration certificate). senger compartment, plainly in the driver’s view, which states the max permissible speed for snow tyres (as per EC Direc- TECHNICAL tive). SPECIFICATIONS INDEX

107 101-108 QUBO GB 1ed:101-110 Fiorino GB 1ed 2-12-2009 9:22 Pagina 108

All four tyres should be the same (brand SNOW CHAINS PROLONGED VEHICLE and track) to ensure greater safety when INACTIVITY driving and braking and better driveabili- Use of snow chains should be in compli- ty. DASHBOARD ance with local regulations. AND CONTROLS If the vehicle needs to be stopped for longer Remember that it is inappropriate to The snow chains may be applied only to than one month, the following precautions change the rotation direction of tyres. the front wheel tyres (drive wheels). must be taken:

SAFETY Check the tension of the chains after the ❒ park the vehicle indoors in a dry and, pos- first few metres have been driven. sibly, well-ventilated place; WARNING ❒ engage a gear and check that the hand- The max. speed of snow brake is not engaged;

STARTING STARTING tyres with “Q” mark must ❒ disconnect the negative terminal of the AND DRIVING Keep your speed down when not exceed 160 km/h, respecting how- snow chains are fitted. Do not battery and check charge (see paragraph ever the applicable rules of the High- exceed 50 km/h. Avoid pot- “Battery” in section “Maintenance and way Code. holes, steps and pavements care”); WARNING MESSAGES and also avoid driving long distances on ❒ LIGHTS AND clean and protect the painted parts using roads not covered with snow in order protective wax; to prevent damaging the vehicle and the roadbed. ❒ clean and protect the shiny metal parts using special compounds readily available; IN AN

EMERGENCY ❒ sprinkle talcum powder on the rubber windscreen and rear window wiper blades and lift them off the glass; ❒ slightly open the windows; AND CARE MAINTENANCE ❒ cover the vehicle with a piece of fabric or perforated plastic sheet; do not use com- pact plastic tarpaulins, which prevent hu- midity from evaporating from the surface TECHNICAL

SPECIFICATIONS of the vehicle; ❒ inflate tyres to a pressure of +0.5 bar above the normal specified pressure and

INDEX check it at intervals; ❒ do not drain the engine cooling system. 108 109-118 QUBO GB 1ed:- 3-12-2009 11:59 Pagina 109

WWAARRNNIINNGG LLIIGGHHTTSS AANNDD MMEESSSSAAGGEESS

GENERAL WARNINGS ...... 110 CLEANING DPF IN PROGRESS ...... 115 DASHBOARD AND CONTROLS LOW BRAKE FLUID ...... 110 FUEL RESERVE ...... 115 GLOW PLUG HEATING ...... 116 HANDBRAKE ON ...... 110 SAFETY AIRBAG FAILURE ...... 111 GLOW PLUG HEATING FAILURE ...... 116 FRONT PASSENGER AIRBAG/ WATER IN DIESEL FUEL FILTER ...... 116

SIDE BAGS DISABLED ...... 111 STARTING

VEHICLE PROTECTION SYSTEM AND DRIVING FAILURE - FIAT CODE ...... 116 ENGINE COOLANT HIGH TEMPERATURE ...... 112 ALARM FAILURE/THEFT ATTEMPT ...... 116 LOW BATTERY CHARGE ...... 112 WARNING MESSAGES EXTERNAL LIGHTS FAILURE ...... 117 LIGHTS AND ABS SYSTEM FAILURE ...... 112 GENERIC FAILURE INDICATION ...... 117 EBD SYSTEM FAILURE ...... 112

BRAKE PAD WEAR ...... 118 IN AN ESP / TRACTION PLUS SYSTEM FAILURE ...... 113 EMERGENCY PARKING SENSOR FAILURE ...... 118 LOW ENGINE OIL PRESSURE ...... 113 SIDE/TAILLIGHTS ...... 118

EXHAUSTED ENGINE OIL ...... 113 AND CARE

FOLLOW ME HOME ...... 118 MAINTENANCE SEAT BELTS NOT FASTENED ...... 114 FRONT FOG LIGHTS ...... 118 INCOMPLETE DOOR LOCKING ...... 114 REAR FOG LIGHTS ...... 118 TECHNICAL SPECIFICATIONS MINIMUM ENGINE OIL LEVEL ...... 114 LEFT-HAND DIRECTION INDICATOR ...... 118 INJECTION SYSTEM FAILURE ...... 114 RIGHT-HAND DIRECTION INDICATOR ...... 118 INDEX EOBD ENGINE CONTROL SYSTEM FAILURE ...... 114 MAIN BEAMS ...... 118 109 109-118 QUBO GB 1ed:- 3-12-2009 11:59 Pagina 110

WARNING LIGHTS LOW BRAKE FLUID Handbrake on AND MESSAGES x (red) The warning light turns on when the hand- HANDBRAKE ON (red) brake is on. DASHBOARD AND CONTROLS GENERAL WARNINGS When the ignition key is moved to MAR, On certain versions, if the vehicle is mov- the warning light turns on and should go ing the buzzer will also sound. Lighting of a warning light is associated to off after a few seconds. IMPORTANT If the warning light turns on

SAFETY a specific message and/or buzzer when ap- plicable. These indications are brief and when travelling, check that the handbrake precautionary and as such must not be Low brake fluid level is not engaged. considered as exhaustive and/or alterna- The warning light turns on when the lev- tive to the information contained in the el of the brake fluid in the reservoir falls

STARTING STARTING Owner’s Handbook, which you are rec- below the minimum level due to possible AND DRIVING ommended to read carefully in all cases. leaks in the circuit. Refer to the information in this section in the event of a failure indication. On certain versions the dedicated mes- sage is displayed. IMPORTANT Failure indications on the WARNING MESSAGES LIGHTS AND display fall into either of two categories: serious failure and less serious failure. Serious failures are indicated by a re- WARNING IN AN peated and prolonged warning “cycle”. If the warning light x turns EMERGENCY on when travelling (on cer- Less serious failures are indicated by a tain versions together with the mes- limited warning “cycle”. sage on the display) stop the vehicle Press MENU ESC to stop the warning immediately and contact Fiat Deal-

AND CARE cycle in both cases. The warning light (or ership. MAINTENANCE symbol on the display) on the instrument panel will stay on until the cause of the fail- ure is eliminated. TECHNICAL SPECIFICATIONS INDEX

110 109-118 QUBO GB 1ed:- 3-12-2009 11:59 Pagina 111

AIRBAG FAILURE (red) WARNING FRONT PASSENGER AIRBAG/SIDE BAGS ¬ The failure of the warning “ When the ignition key is light ¬ is indicated by the DISABLED

(amber) DASHBOARD moved to MAR, the warning warning light flashing longer than the AND CONTROLS light turns on and should go off after a few expected 4 seconds “, thus signalling The warning light “ comes on when the seconds. that the front passenger airbag is de- front passenger’s airbag and the side bags activated. In addition, the airbag sys- (for versions/markets, where provided) The warning light stays on glowing steadi- tem automatically disables the airbag SAFETY ly if there is a failure in the airbag system. are disabled. With front passenger’s airbag on the passenger’s side (both front on, turning the ignition key to MAR, the On certain versions the dedicated mes- and side airbags, for versions/markets, warning light “ comes on steadily for sage is displayed. where provided). In this case, warn- about 4 seconds, it flashes for other 4 sec- ing light ¬ may not indicate a fault onds and then it goes off. STARTING STARTING

in the system. Contact the Fiat Deal- AND DRIVING ership immediately to have the sys- WARNING tem checked before driving off. If the warning light ¬ does WARNING WARNING MESSAGES not turn on or stays on dur- “ LIGHTS AND ing vehicle travel when turning the When the warning light comes on, it indicates that key to MAR, a failure may be present ¬ in the restraint systems. If this is the the light has failed. In addition, the case, the airbags or pretensioners airbag system automatically disables IN AN may not be deployed after an impact the airbag on the passenger’s side EMERGENCY or, in a minor number of cases, they (both front and side airbags, for ver- may be deployed accidentally. Con- sions/markets, where provided). Con- tact the Fiat Dealership immediate- tact the Fiat Dealership immediate-

ly to have the system checked imme- ly to have the system checked before AND CARE diately. driving off. MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

111 109-118 QUBO GB 1ed:- 3-12-2009 11:59 Pagina 112

❒ ENGINE COOLANT In demanding vehicle use condi- ABS SYSTEM FAILURE ç HIGH TEMPERATURE tions (e.g. towing trailers uphill or ve- (amber) (red) hicle at full load): slow down and stop > the vehicle if the warning light stays on. DASHBOARD AND CONTROLS When the ignition key is moved Stop for 2 or 3 minutes with the engine to MAR, the warning light turns on and running and slightly accelerated to When the ignition key is moved to MAR, should go off after a few seconds. favour better coolant circulation. Then the warning light turns on and should go

SAFETY The warning light turns on when the en- stop the engine. Check correct liquid off after a few seconds. The warning light gine is overheated. level as described above. lights up when the system is either not IMPORTANT Under severe use of the ve- working or not available. In this case, the If the warning light comes on, proceed as braking system preserves its efficiency un- follows: hicle, keep the engine on and slightly ac- celerated for a few minutes before switch- altered without, however, offering the ex- STARTING STARTING ❒ during normal travel: stop the ve- tra operating capacity of the ABS system. AND DRIVING ing it off. On certain versions the dedi- hicle, stop the engine and check that the cated message is displayed. Drive carefully and go to a Fiat Dealership water level in the vessel is not under as soon as possible. the MIN reference line. In this case, wait On certain versions the dedicated mes- for a few minutes for the engine to cool WARNING MESSAGES sage is displayed. LIGHTS AND down, then slowly and carefully open LOW BATTERY the cap, top-up with coolant and check CHARGE (red) that the level is between the MIN and w MAX references on the vessel itself. Al- IN AN EBD SYSTEM so check for leakages. Go to a Fiat When the ignition key is moved EMERGENCY Dealership if the warning should come to MAR, the warning light turns on and x > FAILURE on when the engine is started again. should go out as soon as the engine is (red) (amber) started (with the engine running at idle speed a brief delay in going out is allowed).

AND CARE Simultaneous turning on of the warning

MAINTENANCE If the warning light stays on glowing steadi- lights x while > the engine is running ly, immediately contact the Fiat Dealer- indicates an EBD system failure or non- ship. availability of the system. Early locking of the rear wheels may occur in the event of On certain versions the dedicated mes- TECHNICAL violent braking causing the vehicle to SPECIFICATIONS sage is displayed. swerve. Drive very carefully to a Fiat Deal- ership to have the system inspected. On certain versions the dedicated mes- INDEX sage is displayed.

112 109-118 QUBO GB 1ed:- 3-12-2009 11:59 Pagina 113

ESP / TRACTION PLUS WARNING Note that engine oil is exhausted faster SYSTEM FAILURE under the following circumstances: á If the warning light v (amber) turns on when the vehicle is – use of the vehicle prevalently for city dri- DASHBOARD

travelling (on certain versions to- ving, requiring more frequent regenera- AND CONTROLS Turning the ignition key to MAR the gether with the message on the dis- tion of DPF warning light turns on, but it should go off play) stop the engine immediately – use of the vehicle for short drives, in after few seconds. and contact a Fiat Dealership.

which the engine does not have time to SAFETY If the warning light does not go off or stays reach its regular operating temperature on when travelling together with the but- ton led ASR OFF, contact Fiat Dealership. – repeated interruption of the regenera- 2. Exhausted engine oil tion process, signalled by the DPF warn- On certain versions the dedicated mes- ing light coming on. sage is displayed. (only Multijet versions with DPF) STARTING AND DRIVING Note Warning light flashing when driving The warning light will flash and a specific indicates that the ESP system is active. message will appear on the display (for versions/markets, where provided). The WARNING WARNING warning light may flash in the following MESSAGES ways, depending on the version: Exhausted engine oil should LIGHTS AND be replaced as soon as pos- LIGHT STAYS ON: LOW – for 1 minute every two hours; sible after the warning light comes on, v ENGINE OIL PRESSURE never more than 500 km after the (red) – for 3 minute cycles with the warning warning light first comes on. Failure IN AN light off for intervals of 5 seconds until oil to change the oil within the first 500 EMERGENCY FLASHING LIGHT: EXHAUSTED is changed. km may result in severe damage to ENGINE OIL After the initial warning, each time the en- the engine and will result in forfeiture (only Multijet versions with DPF - red) gine is started up, the warning light will of the warranty. Remember that when the warning light flashes, it does AND CARE When the ignition key is turned to MAR continue to flash in the above mentioned MAINTENANCE (ON), the warning light switches on and modes, until the oil is changed. A specific not mean that the level of engine oil should go out as soon as the engine is message will appear on the display (for is low, so if the light flashes you must started. versions/markets, where provided) in ad- not top up. dition to the warning light. 1. Low engine oil pressure TECHNICAL If the warning light flashes, this does not SPECIFICATIONS The warning light turns on and stays on mean that the car is defective but simply constantly (for versions/markets, where informs the driver that it is now necessary

provided) along with the message on the to change the oil as a result of regular ve- INDEX display when the system detects that en- hicle use. gine oil pressure is low. 113 109-118 QUBO GB 1ed:- 3-12-2009 11:59 Pagina 114

SEAT BELTS MINIMUM On certain versions the dedicated mes- < NOT FASTENED k ENGINE OIL LEVEL sage is displayed. (red) (red) In these conditions, the vehicle can con- DASHBOARD

AND CONTROLS tinue travelling at moderate speed with- The warning light in the panel turns on Turning the ignition key to MAR the out demanding excessive effort from the steadily when the vehicle is not running warning light on the panel turns on, but engine. Go to a Fiat Dealership as soon as and the seat belt on the driver’s side is not it should go off after a few seconds. possible. SAFETY correctly fastened. The warning light The warning light goes on in the panel blinks, and a buzzer goes off, when the ve- when the oil level drops below the mini- EOBD engine hicle is running and the front seat belts are mum value. Top up the oil to the correct control system failure not correctly fastened. level (see “Level checking” in section Under normal conditions, when the igni- The buzzer of the S.B.R. (Seat Belt Re- “Maintenance and care”). STARTING STARTING tion key is moved to MAR, the warning AND DRIVING minder) system can only be switched off On certain versions the dedicated mes- light turns on and should go off after en- by a Fiat Dealership. sage is displayed. gine start-up. On some versions the system can be re- This indicates that the warning light is activated from the setup menu. WARNING MESSAGES working correctly. If the warning light ei-

LIGHTS AND INJECTION SYSTEM U FAILURE ther stays on or comes on during vehicle (Multijet versions) travel, the following applies. INCOMPLETE (amber) ❒ Steady light: indicates a fault in the sup- IN AN DOOR LOCKING (red) ply/ignition system which could cause EMERGENCY ´ EOBD ENGINE CONTROL high emissions at the exhaust, possible SYSTEM FAILURE (petrol reduced performances, poor drivabili- On certain versions the warning light turns versions) (amber) ty and high fuel consumption levels. on when one or more doors or the tail- On certain versions the dedicated mes- AND CARE Injection system failure

MAINTENANCE gate are not properly shut. sage is displayed. Under normal conditions, when the igni- In these conditions, the vehicle can con- On certain versions the dedicated mes- tion key is moved to MAR, the warning sage is displayed. tinue travelling at moderate speed with- light turns on and should go off after en- out demanding excessive effort from TECHNICAL gine start-up. the engine or high speeds. Prolonged SPECIFICATIONS If the warning light stays on or turns on use of the vehicle with the warning light when travelling, a fault in the supply/igni- on may cause damage. Go to a Fiat tion system has occurred, which could Dealership as soon as possible. INDEX cause high emissions at the exhaust, pos- The warning light goes out after the sible lack of performance, poor handling fault is cleared, and the indication is and high fuel consumption levels. 114 stored in the system. 109-118 QUBO GB 1ed:- 3-12-2009 11:59 Pagina 115

❒ Flashing light: indicates the possibility of CLEANING DPF WARNING damage to the catalyst (see “EOBD sys- h (PARTICULATE Always drive at a speed ap- tem” in section “Dashboard and con- FILTER) IN PROGRESS trols”). propriate to the traffic con- (only Multijet versions with DASHBOARD ditions, the weather and speed limits. AND CONTROLS If the warning light flashes, release the DPF - amber) The engine may be turned off while accelerator pedal to lower the speed of When the ignition key is turned to MAR the DPF light is on; however, repeat- the engine until the warning light stops ed interruption of the regeneration

(ON), the warning light switches on but it SAFETY flashing; continue the journey at mod- must switch off after a few seconds. The process may result in premature ex- erate speed, trying to avoid driving con- warning light comes on constantly to no- haustion of engine oil. For this reason ditions that may cause further flashing tify the driver that the DPF system needs it is always advisable to wait for the and contact the Fiat Dealership as soon to eliminate captured pollutants (particu- light to go off before turning off the as possible. engine, following the instructions ap-

late) by the regeneration process. The STARTING

warning light does not come on during pearing above. It is not advisable to AND DRIVING every DPF regeneration, but only when complete DPF regeneration with the driving conditions require notification of vehicle stationary. Go to a Fiat Dealership as the driver. To switch the warning light off, WARNING MESSAGES soon as possible if warning the car must stay in motion until regen- LIGHTS AND light U does not light up eration has been completed. The process when the key is turned to normally takes about 15 minutes. The op- FUEL RESERVE MAR or if, while travelling, the warning timum conditions to end the process are ç (amber) light comes on either steady or blinking achieved by keeping the car in motion up IN AN (along with a message on the display). to 60km/h with an engine speed higher EMERGENCY U The operation of the warning light than 2,000 rpm. This light coming on is not When the ignition key is moved to MAR, may be checked by the traffic police us- a car defect and therefore the car does the warning light turns on and should go ing specific devices. Follow the laws in not need to go to the workshop. A spe- off after a few seconds.

force in the country where you are dri- cific message will appear on the display AND CARE ving. when the warning light comes on (for ver- The warning light turns on when about 6 MAINTENANCE sions/markets, where provided). to 7 litres of fuel are left in the tank. IMPORTANT The warning light flashes to

indicate a system failure. If this is the case, TECHNICAL

go to a Fiat Dealership to have the system SPECIFICATIONS checked. INDEX

115 109-118 QUBO GB 1ed:- 3-12-2009 11:59 Pagina 116

GLOW PLUG HEATING WATER IN DIESEL VEHICLE PROTECTION m (Multijet versions) c FUEL FILTER Y SYSTEM FAILURE - (amber) (Multijet versions) FIAT CODE (amber)

DASHBOARD (amber) AND CONTROLS GLOW PLUG HEATING FAILURE When the ignition key is moved to MAR, ALARM FAILURE (amber) (Multijet versions) the warning light turns on and should go (for versions/markets, where provided) off after a few seconds. SAFETY (amber) THEFT ATTEMPT (amber) The warning light c turns on when there Glow plug heating is water in the diesel fuel filter. Vehicle protection system failure Fiat CODE. The warning light goes on when the key is On certain versions the dedicated mes- If with the ignition key at MAR, the warn- STARTING STARTING turned to MAR. It goes out as soon as the sage is displayed.

AND DRIVING glow plugs have reached the preset tem- ing light stays on, this indicates a possible perature. Start the engine as soon as the failure (see “Fiat Code system” in section warning light goes out. “Dashboard and controls”). IMPORTANT At high ambient tempera- The presence of water in the On certain versions the dedicated mes- WARNING MESSAGES LIGHTS AND tures the warning light stays on for an ex- supply circuit may cause se- sage is displayed. tremely short time. vere damage to the injection U Y system and irregular engine IMPORTANT Warning lights and operation. If warning light c lights up will come on at the same time to indicate

IN AN Glow plug heating failure (on some versions with the message on a Fiat CODE system failure. EMERGENCY The warning light flashes in the event of the display), go to a Fiat Dealership as If with the engine running the warning light a failure in the glow plug heating system. soon as possible to have the system Y flashes, the vehicle is not protected by Go to a Fiat Dealership as soon as possi- bled. Water may have been introduced the engine inhibitor device (see “Fiat Code ble. in the tank if this appears immediately system” in section “Dashboard and con- AND CARE after refuelling: in this case, stop the en- MAINTENANCE trols”). On certain versions the dedicated mes- gine immediately and contact a Fiat sage is displayed. Dealership. Contact the Fiat Dealership to have all the keys stored. TECHNICAL SPECIFICATIONS INDEX

116 109-118 QUBO GB 1ed:- 3-12-2009 11:59 Pagina 117

Alarm failure (where provided) EXTERNAL LIGHTS GENERIC FAILURE The turning on of the warning light (or W FAILURE è INDICATION symbol on display) indicates a failure in the (amber) (amber) DASHBOARD

alarm system. Contact Fiat Dealership as AND CONTROLS soon as possible. The warning light comes on (on some ver- The warning light turns on in the follow- The display will show the dedicated mes- sions only) when a failure is detected in ing circumstances. one of the following lights: sage. SAFETY – side/taillights Engine oil pressure sensor failure Theft attempt – stop lights The warning light turns on when a failure The turning on of the warning light (or is detected by the engine oil pressure sen- – rear fog lights sor.

symbol on display) indicates an attempt of STARTING break-in. Contact Fiat Dealership as soon – direction indicators Go to a Fiat Dealership to have the fault AND DRIVING as possible. – plate lights. fixed as soon as possible. The display will show the dedicated mes- sage. The fault identified in the lights above may External light failure WARNING MESSAGES be due to: one or more burnt lamps, a (for versions/markets, where provided) LIGHTS AND blown protection fuse or interruption of the electrical connection. See description of warning light 6. è On certain versions warning light turns IN AN Fuel cut-off switch tripped on as an alternative. EMERGENCY On certain versions the dedicated mes- The warning light comes on when the in- sage is displayed. ertial fuel cut-off switch is triggered. The display will show the dedicated mes- AND CARE

sage. MAINTENANCE

Parking sensor failure (for versions/markets, where provided) TECHNICAL

See description of warning light t. SPECIFICATIONS INDEX

117 109-118 QUBO GB 1ed:- 3-12-2009 11:59 Pagina 118

BRAKE PAD WEAR Follow me home RIGHT-HAND d (amber) The warning light will turn when this de- ¥ DIRECTION vice is active (see “Follow me home” in INDICATOR

DASHBOARD (green - intermittent) AND CONTROLS The warning light on the dial section “Dashboard and controls”). turns on if the front brake pads are worn; The display will show the dedicated mes- The warning light turns on when the di- in this case have them changed as soon sage. rection indicator control lever is moved as possible. downwards or, together with the right in- SAFETY On certain versions the dedicated mes- dicator, when the emergency light button sage is displayed. FRONT FOG LIGHTS is pressed. (green) 5 MAIN BEAMS

STARTING STARTING PARKING SENSOR (blue) AND DRIVING 1 t FAILURE (amber) (for versions/markets, where The warning light comes on when the front fog lights are turned on. provided) The warning light turns on when the WARNING MESSAGES LIGHTS AND The warning light turns on when a failure main beams are turned on. is detected in the parking sensors. è REAR FOG LIGHTS ASR SYSTEM (versions with On certain versions warning light turns (amber) multifunction display)

IN AN on as an alternative. Contact the Fiat Deal- 4

EMERGENCY ership. The ASR system can be turned off by pressing the button ASR OFF. On certain versions the dedicated mes- sage is displayed. The warning light comes on when the rear The display will show the dedicated mes- fog lights are turned on. sage to warn the driver that the system AND CARE is off; at the same time the button led will MAINTENANCE turn on. SIDE/TAILLIGHTS LEFT-HAND 3 (green) DIRECTION Pressing again button ASR OFF the but- Î INDICATOR ton led will turn off and the display will TECHNICAL FOLLOW ME HOME show the dedicated message to warn the

SPECIFICATIONS (green - intermittent) (green) driver that the system is on again. The warning light turns on when the di- Side/Taillights rection indicator control lever is moved

INDEX downwards or, together with the right in- The warning light comes on when the dicator, when the emergency light button side/taillights are turned on. is pressed. 118 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 15:59 Pagina 119

IINN AANN EEMMEERRGGEENNCCYY DASHBOARD

In an emergency we recommend that you call the toll-free number found on the AND CONTROLS Warranty Booklet. You can also connect to the site www.fiat.com to search for the nearest Fiat Dealership point SAFETY STARTING THE ENGINE ...... 120 IF A TYRE IS PUNCTURED ...... 121 QUICK TYRE REPAIR KIT STARTING STARTING

AUTOMATIC FIX & GO ...... 126 AND DRIVING WHEN NEEDING TO CHANGE A BULB ...... 130 IF AN EXTERIOR LIGHT BURNS OUT...... 133 WARNING MESSAGES IF AN INTERIOR LIGHT BURNS OUT ...... 138 LIGHTS AND IF A FUSE BLOWS ...... 141

IF THE BATTERY IS FLAT ...... 149 IN AN

IF THE VEHICLE NEEDS TO BE LIFTED ...... 149 EMERGENCY IF THE VEHICLE NEEDS TO BE TOWED ...... 150 AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

119 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 15:59 Pagina 120

STARTING WARNING THE ENGINE This procedure must be per- formed by expert personnel DASHBOARD

AND CONTROLS because incorrect actions may cause EMERGENCY START electrical discharge of considerable in- Go to a Fiat Dealership immediately if tensity. Furthermore, battery fluid is Y poisonous and corrosive: avoid contact

SAFETY warning light comes on steady on the instrument panel. with your skin and eyes. Keep naked flames away from the battery. No F0T0189m smoking. Do not cause sparks. STARTING THE ENGINE fig. 1 WITH THE AUXILIARY

STARTING STARTING BATTERY If after a few attempts the engine will not AND DRIVING start, do not insist but contact the near- If the battery is down, the engine can be est Fiat Dealership. BUMP STARTING started using an auxiliary battery having the same capacity, or higher. IMPORTANT Never connect the negative Never jump start the engine by pushing, WARNING MESSAGES terminals of the two batteries directly: towing or driving downhill. This could LIGHTS AND For engine starting follow the procedure sparks could ignite explosive gas released cause a flow of fuel into the catalytic con- below, fig. 1. from the battery. If the auxiliary battery is verter and damage it beyond repair. ❒ Connect positive terminals (+ near the installed on another vehicle, prevent acci- IMPORTANT Remember that the brake IN AN terminal) of the two batteries with a dental contact between metallic parts of booster and the power steering system EMERGENCY jump lead; the two vehicles. are not operating until the engine is start- ❒ With a second lead, connect the nega- ed. A greater effort will, therefore, be re- tive terminal (–) of the auxiliary battery quired to press the brake pedal or turn to an earthing point E on the engine or the steering wheel. AND CARE Never use a quick battery MAINTENANCE the gearbox of the vehicle to be start- charger for emergency start ed. operations: this might dam- ❒ Start the engine. age the electronic system and the engine start/supply control units. TECHNICAL ❒ When the engine has been started, fol- SPECIFICATIONS low the sequence above in reverse or- der to remove the leads. INDEX

120 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 121

IF A TYRE WARNING WARNING IS PUNCTURED The spare wheel (for ver- Use the jack only to replace sions/markets, where provid- wheels on the vehicle with DASHBOARD The vehicle is supplied with a “Fix&Go fast ed) is specific for your vehicle. There- which it is supplied or on other vehi- AND CONTROLS tyre repair kit” (see instructions in next fore, it must not be used on vehicles cles of the same model. Never use the section). As an alternative to the Fix&Go of a different model. Do not use spare jack for other purposes, such as lift- kit, the vehicle may be equipped with a wheels of different models on your ve- ing other vehicle models. Never use the regular size spare wheel. hicle. The spare wheel must only be jack to carry out repairs under the ve- SAFETY used in an emergency. Use it as short- hicle. Incorrect positioning of the jack Wheel changing and correct use of the jack ly as possible. may cause the lifted vehicle to fall. Do and spare wheel call for some precautions not use the jack for loads higher than as listed below. those shown on the label. STARTING STARTING AND DRIVING WARNING Indicate that the vehicle is WARNING stationary according to the WARNING MESSAGES LIGHTS AND laws in force: emergency lights, re- Incorrect wheel cap assem- fracting warning triangle, etc. Pas- bly may cause it to come off sengers should leave the vehicle, par- when the vehicle is travelling. Never

ticularly if it is very loaded, and wait tamper with the inflation valve. Nev- IN AN for the wheel to be changed away er introduce tools of any kind be- EMERGENCY from on-coming traffic. In case of tween rim and tyre. Regularly check steep slopes or rough slopes, place the pressure of the tyres and small wedges or other materials suitable to spare wheel referring to the values stop the vehicle under the wheels. Re- shown in the “Technical Specifica- AND CARE pair and refit the standard wheel as tions” section. MAINTENANCE soon as possible. Do not apply grease to the bolt threading before assem- bly: the bolts could come loose un-

expectedly. TECHNICAL SPECIFICATIONS INDEX

121 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 122

Important notes: ❒ the jack weight is 1.76 kg; ❒

DASHBOARD the jack requires no adjustment; AND CONTROLS ❒ the jack cannot be repaired. If it breaks it must be replaced with a new jack;

SAFETY ❒ no tool other than the cranking device has to be fitted on the jack. To replace a tyre proceed as follows: fig. 2 F0T0206m ❒ stop the vehicle in a position so that it

STARTING STARTING is not a danger for on-coming traffic in ❒ the box contains the following tools fig. AND DRIVING a location where you can replace the 3: wheel safely. The ground must be flat A a jack cranking device; and compact. B a jack; WARNING MESSAGES ❒ LIGHTS AND Turn the engine off and pull up the C a wrench for tyre assembly/disassembly; handbrake. D a tow hook ring; ❒ Engage first gear or reverse. E a retention strap for tool box; fig. 3 F0T0281m

IN AN ❒ open the rear swing doors the luggage F a fuse extractor; EMERGENCY compartment tailgate, take the tool bag G a screw driver. fig. 2 located on the left side of the lug- gage compartment releasing the flexible The tool box also contains a few spare fus- retainers and place it next to the wheel es.

AND CARE to be changed; MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

122 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 123 DASHBOARD AND CONTROLS SAFETY A

fig. 5 F0T0168m fig. 6 F0T0169m

❒ Then, use the wrench C-fig. 3 to pull STARTING the wheel out of the vehicle, fig. 5. AND DRIVING ❒ Remove cap B-fig. 6 and release the re- taining cable, then free the wheel from WARNING the toothed support C unscrewing the MESSAGES 2 screws. LIGHTS AND fig. 4 F0T0292m ❒ Loosen the fastening bolts of the wheel to be replaced by about one turn us- ing the wrench provided C-fig. 3. IN AN ❒ Take the wrench C-fig. 3 and turn the EMERGENCY locknut of the spare wheel support ❒ Remove the wheel cap. A-fig. 4 from the inside of the loading compartment so as to release the

wheel. To reduce the effort made, place AND CARE the screw driver G-fig. 3 in the seat in- MAINTENANCE side the wrench C. TECHNICAL SPECIFICATIONS INDEX

123 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 124 DASHBOARD AND CONTROLS SAFETY

fig. 7 F0T0124m fig. 8 F0T0125m fig. 9 F0T0126m

STARTING STARTING ❒ Start expanding the jack so that it par- ❒ Fully expand the jack and lift the vehi- ❒ Unscrew the fastening bolts and remove AND DRIVING tially opens fig. 7. Then, position it un- cle until the wheel is a few centimetres the wheel. der the vehicle near the reference above ground level. When turning the ❒ grooves A-fig. 8 close to the wheel to jack handle, make sure that it rotates Make sure the contact surfaces be- be replaced. freely without risking to injure your tween the spare wheel and hub are WARNING MESSAGES clean so that the fastening bolts will not LIGHTS AND ❒ hand by rubbing it against the ground. Expand the jack until groove A-fig. 9 on Even the moving components of the come loose. the jack correctly matches the lower jack (screws and joints) can cause in- profile B on the side frame. juries; do not touch them. If you be- IN AN ❒ Warn anybody nearby that the vehicle come fouled with lubricating grease, EMERGENCY is about to be lifted. They must stay clean yourself thoroughly. clear and not touch the vehicle until it is back on the ground. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

124 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 125 DASHBOARD

1 AND CONTROLS 4 3

2 SAFETY

fig. 10 F0T0282m fig. 11 F0T0293m fig. 12 F0T0170m

❒ fit the standard wheel by inserting the After tyre replacement ❒ Put the jack and tools back in the tool STARTING AND DRIVING first stud B-fig. 10 for two threads in ❒ box. the hole closest to the inflation valve A; Fasten the toothed support on the drilled wheel by means of the 2 screws ❒ Position the tool box in the boot. ❒ fit the wheel cap, making the symbol C (insert the support from outside the ❒ Secure the box using the retention WARNING (on the back of the cap) coincide with wheel). Rehook the metallic retaining MESSAGES the inflation valve and fit the other three cable in the specific seat and reinsert straps. LIGHTS AND bolts; the protection cap A-fig. 12. ❒ fasten bolts using the wrench provided; ❒ Check replaced wheel positioning un- der the floor (the lifting system is sup- IN AN ❒ retract the jack until the vehicle rests EMERGENCY on the ground and pull the jack out. plied with a clutch to limit the end of the stroke). Incorrect positioning may ❒ use the wrench provided to tighten the jeopardise safety. bolts completely in a criss-cross fashion ❒ Lift again the wheel tightening again the AND CARE following the numerical sequence shown A-fig. 4 MAINTENANCE in fig. 11. lock bolt . TECHNICAL SPECIFICATIONS INDEX

125 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 126

QUICK TYRE REPAIR KIT FIX & GO

DASHBOARD automatic AND CONTROLS The automatic fast tyre repair kit Fix & Go automatic is placed in a container in the

SAFETY boot. The tyre repair kit fig. 13 includes: F0T0129m F0T0130m ❒ a cylinder A containing sealant which is fig. 13 fig. 14 fitted with: STARTING STARTING

AND DRIVING – filling tube B; WARNING WARNING – an adhesive label C bearing the words Give the instruction brochure The kit cannot be used to re- “max. 80 km/h”, to be attached in an to the personnel who will be pair damage to the tyre side- easy-to-see position for the driver (on in charge of repairing the tyre using wall. Do not use the fast repair kit if WARNING MESSAGES

LIGHTS AND the dashboard) after tyre repair; the kit. the tyre is damaged as the vehicle has run a flat tyre. ❒ a compressor D complete with a pres- sure gauge and connections;

IN AN ❒ an instruction brochure (see fig. 14) to EMERGENCY be utilised for prompt and proper use In the event of a puncture of the fast repair kit and to be handed caused by foreign bodies, it is WARNING over to the personnel who will be in possible to repair tyres show- If the wheel rim is damaged charge of handling the repaired tyre; ing damages on the track or (the channel is so deformed

AND CARE shoulder up to max 4 mm diameter. as to cause an air leakage) it cannot MAINTENANCE ❒ a pair of safety gloves located in the side be repaired. Do not remove the for- space of the compressor; eign body (screw or nail) from the tyre. ❒ adapters for inflating different elements.

TECHNICAL The Fix & Go kit container also includes SPECIFICATIONS some spare fuses. INDEX

126 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 127

IMPORTANT INFORMATION: WARNING The sealing fluid of the fast tyre repair kit The cylinder contains ethyl- is effective with external temperatures be- ene glycol. Contains latex: DASHBOARD

tween –20 °C and +50 °C. may cause an allergic reaction. AND CONTROLS Harmful if swallowed. Irritates the eyes. May cause sensitization by in- halation or contact. Avoid contact WARNING with your eyes, skin and clothes. In SAFETY Do not operate the com- the event of contact, wash immedi- pressor for longer than 20 ately with plenty of water. Do not in- fig. 15 F0T0190m consecutive minutes. Risk of over- duce vomiting if swallowed. Rinse your mouth and drink plenty of wa- heating. The fast repair kit is not suit- INFLATION PROCEDURE STARTING able for permanent repairs. The tyres ter. Call a doctor immediately. Keep AND DRIVING may only be repaired temporarily. away from children. The product must not be used by asthmatics. Do not breath in the vapours during in- WARNING

sertion and suction. Call a doctor im- WARNING MESSAGES mediately if allergic reactions are not- Put on the safety gloves pro- LIGHTS AND ed. Store the cylinder in the specific vided together with the fast Do not dispose of the cylinder tyre repair kit. and contained sealant in the compartment, away from sources of

environment. Dispose of them heat. The sealing fluid will expire. Re- IN AN according to the national and place the cylinder containing the EMERGENCY local laws in force. sealant after the expiration date. ❒ Ensure that the handbrake is up. Remove the tyre valve cap, extract the flexible filler tube A-fig. 15 and fasten AND CARE

the ring B onto the tyre valve; MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

127 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 128 DASHBOARD AND CONTROLS SAFETY

fig. 16 F0T0133m fig. 17 F0T0131m fig. 18 F0T0191m

STARTING STARTING ❒ make sure that switch E-fig. 17 on the ❒ if after this operation it is still not pos-

AND DRIVING WARNING compressor is in position 0 (off), start sible to reach at least 1.8 bar after 5 the engine, plug into the socket D-fig. minutes, do not start driving since the Affix the adhesive label in an 16 and operate the compressor turn- tyre is excessively damaged and the fast easy-to-see position for the ing switch E-fig. 17 to position I (on). tyre repair kit cannot guarantee suit- driver as a reminder that the tyre has WARNING MESSAGES LIGHTS AND Inflate the tyre to the pressure speci- able sealing. Contact the Fiat Dealer- been treated with the fast repair kit. fied in the “Inflation pressure” para- ship; Drive carefully, particularly on bends. Do not exceed 80 km/h. Do not ac- graph in the “Technical Specifications” ❒ section. For a more accurate reading, if the tyre is inflated at the pressure val- celerate and brake suddenly. IN AN check the pressure on gauge F-fig. 17 ue specified in paragraph “Cold inflation EMERGENCY with the compressor off: pressures”, “Technical Specifications” section, start driving immediately; ❒ if after 5 minutes it is still not possible ❒ to reach at least 1.5 bar, disengage the After driving for about 10 minutes stop and check the tyre pressure again; pull

AND CARE compressor from the valve and current

MAINTENANCE outlet, then move the vehicle forth for up the handbrake. approx. ten metres in order to distrib- ute the sealing fluid inside the tyre even- ly. Then, repeat the inflation operation; TECHNICAL SPECIFICATIONS INDEX

128 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 129

WARNING Stop the vehicle if the pres- sure has dropped below 1.8 DASHBOARD

bars. The automatic Fix & Go fast re- AND CONTROLS pair kit cannot work properly be- cause the tyre is excessively damaged. Go to a Fiat Dealership. SAFETY

fig. 19 F0T192m fig. 20 F0T0132m ❒ If at least 1.8 bar pressure is read, re-

store proper pressure (with engine FOR CHECKING AND CYLINDER REPLACEMENT STARTING running and handbrake on) and restart. RESTORING PRESSURE ONLY PROCEDURE AND DRIVING ❒ Drive with the utmost care to the near- The compressor may also be used for To replace the cylinder proceed as fol- est Fiat Dealership. restoring pressure only. Release the quick lows: WARNING MESSAGES coupling and connect directly to the tyre ❒ LIGHTS AND valve fig. 19; in this way, the cylinder will disconnect connection B-fig. 20; not be connected to the compressor and ❒ turn the cylinder anticlockwise to raise WARNING no sealant will be injected. and replace it; Remember to inform the ❒ IN AN workshop that the tyre has fit the new cylinder and turn it clock- EMERGENCY been treated with a fast repair kit. wise; Give the instruction booklet to the ❒ plug connection B into the cylinder and tyre repair workshop personnel. fit the transparent tube A into the

proper space. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

129 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 130

WHEN NEEDING WARNING If possible, we recommend TO CHANGE A BULB Modifications or repairs to that you let the Fiat Dealer- the electrical system that are ship replace the bulbs. Prop- DASHBOARD AND CONTROLS GENERAL INSTRUCTIONS not carried out properly or do not er operation and orientation take the system technical specifica- of the external lights are essential for ❒ Before changing a bulb check the con- tions into account can cause mal- the safety of the running vehicle, and tacts for oxidation. functions leading to the risk of fire. for avoiding legal sanctions. SAFETY ❒ Burnt bulbs must be replaced by oth- ers of the same type and power. ❒ Always check the height of the head- IMPORTANT A slight misting may appear light beam after changing a bulb. WARNING on the internal surface of the headlight: STARTING STARTING this does not indicate a fault. It is a natur- AND DRIVING ❒ When a bulb is not working, check that Halogen bulbs contain pres- al event caused by the low temperature the corresponding fuse is intact before surised gas which may cause and the degree of humidity in the air. It will replacing it: refer to the “If a fuse small fragments of glass to be pro- rapidly disappear when the headlights are blows” paragraph in this section for the jected outwards if the bulb is broken. switched on. The presence of drops inside WARNING MESSAGES LIGHTS AND location of fuses. the headlights indicates infiltration of wa- ter. Go to a Fiat Dealership.

IN AN Halogen lamps must be han-

EMERGENCY dled holding the metallic part only. Touching the transpar- ent part of the bulb with your fingers may reduce the intensity of the

AND CARE emitted light and even compromise du- MAINTENANCE ration of the lamp. In case of acciden- tal contact, rub the lamp with a cloth and spirit and leave to dry. TECHNICAL SPECIFICATIONS INDEX

130 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 131

BULB TYPES fig. 21 C Cylindrical bulbs: release from the contacts to extract. Various types of bulbs are fitted to your

vehicle. D Halogen bulbs: release the fastening DASHBOARD clip from the corresponding seat to re- AND CONTROLS A All glass bulb: clipped into place. Pull move the bulb. to extract.

E Halogen bulbs: release the fastening SAFETY B Bayonet bulbs: to remove this type clip from the corresponding seat to re- of bulb from its holder, press the bulb move the bulb. and turn it anticlockwise. STARTING STARTING AND DRIVING WARNING MESSAGES LIGHTS AND IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS fig. 21 F0T0022m INDEX

131 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 132

Bulb Type Power Ref. figure Main beam headlights H1 60W E DASHBOARD AND CONTROLS Dipped beam headlights H1 55W D Front sidelights W5W 5W A

SAFETY Front direction indicators PY21W 21W B Side direction indicators WY5W 5W A Rear direction indicators PY21W 21W B STARTING STARTING AND DRIVING Rear taillights / Rear fog lights P4/21W 4W/21W B Stop lights P21W 21W B WARNING MESSAGES LIGHTS AND 3rd stop light W5W 5W A Reverse light P21W 21W B

IN AN Front fog lights (for versions/markets, where provided) H1 55W E EMERGENCY Front ceiling light with movable lens C 10W C Front ceiling light with spot lights AND CARE

MAINTENANCE (for versions/markets, where provided) C 10W C Rear ceiling light (for versions/markets, where provided) C 10W C TECHNICAL

SPECIFICATIONS Portable light (for versions/markets, where provided) W5W 5W A INDEX

132 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 133

IF AN EXTERIOR LIGHT BURNS OUT DASHBOARD For the type of bulb and power rating, see AND CONTROLS “When needing to change a bulb”.

FRONT LIGHT CLUSTERS fig. 22 SAFETY The front light clusters contain sidelight, dipped beam, main beam and direction in- fig. 22 F0T0093m fig. 23 F0T0094m dicator bulbs.

The bulbs are arranged inside the light SIDE/TAILLIGHTS ❒ remove the bulb B and replace it; STARTING cluster as follows: AND DRIVING To change the bulb, proceed as follows: ❒ install the new bulb: fit the bulb back A side/taillights and main/low beam lights; in position A-fig. 23 and put the pro- ❒ remove the protection lid A-fig. 22; B direction indicators. tection lid A-fig. 22 back. WARNING ❒ MESSAGES

turn the bulb holder anticlockwise A- LIGHTS AND fig. 23 and pull it out; IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

133 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 134

DIPPED BEAM HEADLIGHTS/ MAIN BEAM HEADLIGHTS To change the bulb (double filament), pro- DASHBOARD AND CONTROLS ceed as follows: ❒ remove the protection lid A-fig. 22; ❒ release the bulb stop clip as shown by SAFETY the arrows fig. 22; ❒ remove the bulb A-fig. 24 from con- F0T0095m F0T0096m nector B and replace it; fig. 24 fig. 25

STARTING STARTING ❒ fit the new bulb on the connector B. DIRECTION INDICATORS AND DRIVING Then, make sure that the profile of the metal part matches the grooves on the Front indicators headlight bulb support; To change the bulb, proceed as follows:

WARNING ❒ MESSAGES close the bulb stop clip and reinstall the ❒ LIGHTS AND turn the protection lid B-fig. 22 anti- protection lid A-fig. 22; clockwise; ❒ remove the bulb A-fig. 25 and replace

IN AN it;

EMERGENCY ❒ reinstall the protection lid B. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

134 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 135

FOG LIGHTS (for versions/markets, where provided)

IMPORTANT To replace the front fog DASHBOARD lights you must contact the Fiat Dealership. AND CONTROLS SAFETY

fig. 26 F0T0097m fig. 27 F0T0098m

Side indicators ❒ refit the bulb holder C in the lens by STARTING turning it clockwise; AND DRIVING To change the bulb, proceed as follows: ❒ ❒ refit the unit making sure the catch push the lens A-fig. 26 to compress clicks into place B. the internal catch B-fig. 27. Then, pull WARNING MESSAGES the unit outwards; LIGHTS AND ❒ turn the bulb holder C anticlockwise, remove the snap-fitted bulb D and re-

place it; IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

135 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 136

REAR LIGHT CLUSTERS Rear light clusters contain the bulbs of the taillights, direction indicators, reverse/rear DASHBOARD

AND CONTROLS fog lights and stop light. Access to the light clusters is gained as fol- lows:

SAFETY ❒ open the rear swing-doors; ❒ remove the screws A-fig. 28 to access the light cluster B-fig. 29; ❒ slide the connector out C-fig. 29. STARTING STARTING AND DRIVING

The bulbs are arranged inside the light cluster fig. 30 and fig. 31 as follows: WARNING MESSAGES LIGHTS AND A stop lights; B direction indicators; fig. 28 F0T0099m fig. 30 F0T0101m

IN AN C reverse lights;

EMERGENCY D taillights / rear fog lights. Access to these lights is gained by pulling the 5 fins E-fig. 30 outwards. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS fig. 29 F0T0100m fig. 31 F0T0102m INDEX

136 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 137 DASHBOARD AND CONTROLS SAFETY

fig. 32 F0T0212m fig. 33 F0T0104m fig. 34 F0T0105m

rd 3 STOP LIGHTS fig. 32 PLATE LIGHTS STARTING AND DRIVING To replace the 3rd stop lights you must To replace the bulbs A-fig. 33 proceed as contact the Fiat Dealership. follows: ❒ pull the tongues indicated by the arrows WARNING MESSAGES and remove the bulb holders; LIGHTS AND ❒ turn the bulb holder B-fig. 34 clock- wise and take the bulb C out. IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

137 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 138

IF THE INTERIOR LIGHT BURNS OUT DASHBOARD AND CONTROLS For the type of bulb and power rating, see “When needing to change a bulb”.

SAFETY FRONT CEILING LIGHT

Front ceiling light with F0T0106m F0T0023m movable lens fig. 35 fig. 36

STARTING STARTING To replace the bulbs proceed as follows: ❒ replace bulb C-fig. 37 releasing it from AND DRIVING ❒ remove the ceiling light A-fig. 35 lev- the side contacts. Then, insert the new ering in the points shown by the ar- bulb making sure it is correctly clamped rows; between the contacts;

WARNING ❒ MESSAGES ❒ close the lid and secure the ceiling light LIGHTS AND open the lid B-fig. 36 as indicated; in its housing locking it properly. IN AN

EMERGENCY fig. 37 F0T0024m AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

138 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 139 DASHBOARD AND CONTROLS SAFETY

fig. 38 F0T0143m fig. 39 F0T0144m fig. 40 F0T0107m

Ceiling light with spot lights REAR CEILING LIGHT STARTING AND DRIVING (for versions/markets, where provided) To change the bulb, proceed as follows: To replace the bulbs proceed as follows: ❒ remove the ceiling light A-fig. 40 lev- ❒ work in the points shown by the ar- ering in the points shown by the ar- WARNING MESSAGES rows and remove light A-fig. 38; rows; LIGHTS AND ❒ open the protection door B-fig. 39; ❒ open the lid B-fig. 41 as indicated; ❒ ❒ replace bulb C-fig. 42 releasing it from

replace bulbs C after releasing them IN AN

from the side contacts; make sure that the side contacts. Then, insert the new F0T0023m EMERGENCY new bulbs are correctly clamped be- bulb making sure it is correctly clamped fig. 41 tween contacts; between the contacts; ❒ close the door B-fig. 39 and secure the ❒ close the lid B-fig. 41 and secure the

ceiling light A-fig. 38 in its housing lock- ceiling light in its housing locking it AND CARE ing it properly. properly. MAINTENANCE TECHNICAL SPECIFICATIONS

fig. 42 F0T0024m INDEX

139 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 140

PORTABLE LIGHT (for versions/markets, where provided) To change the bulb, proceed as follows: DASHBOARD AND CONTROLS ❒ press button A-fig. 43 and remove the AUTO removable ceiling light B; ❒ remove the ceiling light levering in the SAFETY points shown by the arrows; ❒ F0T0108m replace bulb C-fig. 44 after releasing F0T0251m fig. 43 it from the side contacts making sure fig. 45 that the new bulb is correctly clamped

STARTING STARTING between the contacts. BOOT LIGHT AND DRIVING To change the bulb, proceed as follows: ❒ open the tailgate;

WARNING AUTO MESSAGES ❒

LIGHTS AND remove the light A-fig. 45 levering in the point shown by the arrow. ❒ open the protection B and replace the snap-fitted bulb; IN AN

EMERGENCY fig. 44 F0T0109m ❒ re-close the protective cover B on the lens; ❒ refit the light A inserting it in its cor- rect position firstly on one end and AND CARE

MAINTENANCE then on the other until it clicks into place. TECHNICAL SPECIFICATIONS INDEX

140 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 141

IF A FUSE BLOWS WARNING If a general protection fuse GENERAL trips (MEGA-FUSE, MIDI- DASHBOARD Fuses are protective devices for the elec- FUSE), contact the Fiat Dealership. AND CONTROLS tric system: they come into action (i.e. cut off) mainly due to a fault or improper ac-

tion on the system. SAFETY When a specific device does not work cor- WARNING rectly, check the efficiency of the corre- fig. 46 F0T0015m sponding fuse. The conducting element Remove the key from the ig- A- fig. 46 must not be interrupted. nition switch and switch off STARTING STARTING

WARNING all points of use before replacing a AND DRIVING If it is, replace the blown fuse with a new fuse. one having the same amperage (same If the fuse blows out again, colour). contact the Fiat Dealership.

B intact fuse. WARNING MESSAGES LIGHTS AND C fuse with broken conducting element. WARNING To replace the fuse use the extractor D Never replace a blown fuse If a general protection fuse

positioned inside the tool box or the Fix with metal wires or other ma- for safety systems (air bag IN AN

& Go kit container (for versions/markets, terial. system, braking system), power unit EMERGENCY where provided). systems (engine system, transmission system) or steering system is triggered, contact a Fiat Dealership. AND CARE MAINTENANCE WARNING Never replace a fuse with another one having higher

amperage: FIRE HAZARD. TECHNICAL

To identify the protection fuse, see the ta- SPECIFICATIONS bles in the following pages. INDEX

141 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 142 DASHBOARD AND CONTROLS SAFETY

fig. 47 F0T0171m fig. 48 F0T0172m

STARTING STARTING FUSES INSTALLED ON ENGINE Removing the lid of the fuse box AND DRIVING WIRED BOX Proceed as follows: The fuse box is positioned on the right- ❒ remove the lid A-fig. 47 protecting the hand side of the engine. positive pole of the battery by pulling WARNING MESSAGES LIGHTS AND it up; ❒ use the fin A-fig. 48 to remove the fuse box protection lid B; fig. 49 F0T0173m IN AN ❒

EMERGENCY move the lid towards the headlight by turning it anticlockwise (as shown by If you need to wash the en- the arrow). Then, remove it, fig. 49. gine compartment, take care ❒ The fuse central unit is now accessible, not to directly hit the engine compartment control unit AND CARE fig. 50.

MAINTENANCE with the water jet. TECHNICAL SPECIFICATIONS INDEX

142 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 143 DASHBOARD AND CONTROLS SAFETY

fig. 51 F0T0174m

Re-installing the lid of the fuse box STARTING AND DRIVING To re-install the lid proceed as follows: ❒ fit the two attachments A-fig. 51 in the corresponding seats on the fuse box; WARNING MESSAGES LIGHTS AND ❒ hook the fin B in its seat until the lock- ing click is heard. fig. 50 F0T0181m IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

143 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 144

DEVICE PROTECTED FUSE AMPERE FIGURE Computer Body F01 60 50 DASHBOARD AND CONTROLS Available F02 – 50 Available F05 – 50

SAFETY One-speed engine cooling electric fan (75W)/ Low speed engine cooling electric fan (187W) F06 20 50 Low speed engine cooling electric fan (350W) F06 30 50

STARTING STARTING High speed engine cooling electric fan (187W) F07 30 50 AND DRIVING High speed engine cooling electric fan (350W) F07 40 50 Climate system electric fan F83 40 50 WARNING MESSAGES LIGHTS AND Available (trailer kit) (F09) (15) (50) Buzzers F10 10 50

IN AN Main beam headlights F14 15 50 EMERGENCY Available F15 – 50 Climate system compressor F19 7.5 50 AND CARE

MAINTENANCE Rear heated window/Mirror demisters F20 30 50 Fuel pump F21 15 50 TECHNICAL SPECIFICATIONS INDEX

144 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 145

DEVICE PROTECTED FUSE AMPERE FIGURE Fog lights F30 15 50 DASHBOARD Available F08 – 50 AND CONTROLS Cigar lighter/Passenger compartment current outlets/Heated seats F85 30 50

+15 Reverse lights/decimetre/Water sensor in diesel fuel/ SAFETY Reels for relays T02, T05, T14, T17 and T19 F87 7.5 50 STARTING STARTING AND DRIVING WARNING MESSAGES LIGHTS AND IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

145 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 146 DASHBOARD AND CONTROLS SAFETY

fig. 52 F0T0178m

STARTING STARTING FUSES INSTALLED ON AND DRIVING PASSENGER COMPARTMENT WIRED BOX Access to the fuses is gained by removing WARNING MESSAGES

LIGHTS AND the two screws A-fig. 52 using the metal insert of the ignition key and subsequently removing the door B. Fuses are positioned in the two fuse hold- IN AN

EMERGENCY er boxes illustrated in fig. 53. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

146 fig. 53 F0T0183m 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 147

DEVICE PROTECTED FUSE AMPERE FIGURE Dipped beam headlight (on passenger’s side) F12 7.5 53 DASHBOARD Dipped beam headlight (on driver’s side)/Headlight aiming control F13 7.5 53 AND CONTROLS INT/A relay reels SCM F31 5 53

Timed internal lighting F32 7.5 53 SAFETY Bluetooth® sound system/central unit node/Blue&Me™ node/Troubleshooting outlet for EOBD system/Volumetric alarm control unit/Alarm siren control unit F36 10 53

Instrument panel/Stop light control node (NA) F37 5 53 STARTING AND DRIVING Door/boot lock actuators F38 20 53 Widow/rear window washer two direction pump F43 15 53 WARNING MESSAGES Front power window (on driver’s side) F47 20 53 LIGHTS AND Front power window (on passenger’s side) F48 20 53

Control lighting/Parking sensor control unit/ IN AN Electric door mirror control/Volumetric alarm control unit F49 5 53 EMERGENCY INT Sound system node/Bluetooth® central unit node/Blue&Me™ node/ Movement of electric door mirrors/Clutch switch/Stop light control (NC) F51 5 53 AND CARE Instrument panel node F53 5 53 MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

147 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 148

DEVICE PROTECTED FUSE AMPERE FIGURE Door mirror defrosters F41 7.5 53 DASHBOARD AND CONTROLS Available F45 – 53 Available F46 – 53

SAFETY Available F90 – 53 Available F91 – 53 Available F92 – 53 STARTING STARTING

AND DRIVING Available F93 – 53 Cigar lighter F94 15 53

WARNING Available F95 – 53 MESSAGES LIGHTS AND Passenger compartment current outlet F96 15 5 Front seat heater (on driver’s side) F97 10 53 IN AN

EMERGENCY Front seat heater (on passenger’s side) F98 10 53 AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

148 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 149

IF THE BATTERY IS FLAT WARNING IF THE VEHICLE NEEDS Battery fluid is poisonous TO BE LIFTED IMPORTANT The battery recharging pro- and corrosive: avoid contact

cedure is provided as an example only. DASHBOARD with your skin and eyes. The battery If the vehicle needs to be lifted, go to a AND CONTROLS You are recommended to go to a Fiat must be recharged in a ventilated Fiat Dealership which is equipped with the Dealership to have this operation per- place away from naked flames or arm hoist or workshop lift. formed. possible sources of sparks to avoid the We recommend recharging the battery risk of explosion and fire. SAFETY slowly for approximately 24 hours at low amperage. A prolonged recharge might damage the battery.

Charge the battery as follows: WARNING STARTING AND DRIVING ❒ disconnect battery negative terminal; Never attempt to recharge a frozen battery: defrost it first ❒ connect the charger cables to the bat- to prevent the risk of explosion. If the tery terminals, observing the poles;

battery was frozen, have it inspect- WARNING MESSAGES LIGHTS AND ❒ ed by specialised personnel before turn on the charger; recharging to check that the internal ❒ when you have finished, turn the charg- elements are not damaged and that the casing is not cracked, which caus- er off before disconnecting the battery; IN AN

❒ es the risk of leakage of poisonous, EMERGENCY reconnect battery negative terminal. corrosive gas. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

149 119-150 QUBO GB 1ed:123-154 Fiorino GB 1ed 3-12-2009 16:00 Pagina 150

IF THE VEHICLE NEEDS WARNING TO BE TOWED During towing operations the brake booster is not engaged. DASHBOARD AND CONTROLS The tow ring supplied with the vehicle is Therefore, a heavier effort must be positioned in the tool in the boot. made on the pedal. Do not use wires for towing. Do not jerk. During towing op- erations make sure not to damage parts

SAFETY HOOKING THE TOW HOOK fig. 54-55 in contact with the vehicle. When tow- ing the vehicle comply with the specific Proceed as follows: fig. 54 F0T0085m rules of the Highway Code regarding the ❒ towing device and the behaviour to release the cap A; maintain on the road. Do not start the STARTING STARTING

AND DRIVING ❒ take the tow hook B from the tool box; engine while towing the vehicle. ❒ tighten the hook on the rear or front threaded pin. WARNING MESSAGES LIGHTS AND The front and rear tow hooks must only be used for emer- gency situations on the road.

IN AN The vehicle may be towed for

EMERGENCY WARNING short distances when a dedicated de- fig. 55 F0T0086m Before starting towing oper- vice is used in compliance with the ations, turn the ignition key Highway Code (rigid bar), in order to to MAR and then to STOP, without WARNING move the vehicle on the road in prepa- ration for towing by a tow truck Tow AND CARE extracting it. If the key is extracted, Clean the threaded seat care- MAINTENANCE the steering wheel lock will be auto- fully before fastening the ring. hooks MUST NOT be used to tow ve- matically activated, thus preventing Make sure that the ring is fully fastened hicles off the road or where there are steering. in the seat before towing the vehicle. obstacles and/or for towing operations using cables or other non-rigid devices.

TECHNICAL Respecting the above conditions, tow- SPECIFICATIONS ing must only take place with two ve- hicles (one towing, the other towed) WARNING travelling as far as possible in alignment Do not start the engine INDEX along the same centreline. when towing the vehicle. 150 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 151

MMAAIINNTTEENNAANNCCEE AANNDD CCAARREE

SCHEDULED SERVICING ...... 152 DASHBOARD AND CONTROLS SCHEDULED SERVICING PLAN ...... 153 PERIODIC CHECKING ...... 157 DEMANDING VEHICLE USE ...... 157 SAFETY CHECKING FLUID LEVELS ...... 158 AIR CLEANER/POLLEN FILTER ...... 158 STARTING STARTING

BATTERY ...... 163 AND DRIVING WHEELS AND TYRES ...... 165 RUBBER HOSES ...... 166 WARNING MESSAGES WINDSCREEN/REAR WINDOW WIPER ...... 167 LIGHTS AND BODYWORK ...... 169 INTERIORS ...... 172 IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

151 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 152

SCHEDULED SERVICING IMPORTANT Scheduled service coupons IMPORTANT You are advised to contact are required by the manufacturer. Non- the Fiat Dealership in the event of any mi- Correct servicing is essential for ensur- performance of service coupons may nor operating faults, without waiting for cause the warranty to become null and the next service coupon. DASHBOARD ing long vehicle life under the best condi- AND CONTROLS void. tions. If your vehicle is used frequently for tow- This is why Fiat has planned a series of Scheduled Servicing is performed by all Fi- ing, the interval between service coupons checks and maintenance operations every at Dealerships at pre-established times. must be reduced. SAFETY 30,000 km. If during scheduled servicing, the need aris- Scheduled servicing will not however ful- es for further replacements or repairs, ly cover all of the needs of your vehicle. these may be carried out exclusively af- Even before carrying out the 30,000 km ter obtaining the explicit agreement from STARTING STARTING service coupon, and later between one the Customer. AND DRIVING consecutive coupons, ordinary vehicle care is still required such as for example routine checks to top up the fluid levels, if necessary, tyre pressure checks, etc. WARNING MESSAGES LIGHTS AND IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

152 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 153

SCHEDULED SERVICING PLAN PETROL VERSIONS DASHBOARD AND CONTROLS Thousands of kilometres 30 60 90 120 150 180 Check tyre conditions/wear and adjust

pressure if required ●●●●●● SAFETY Check light system operation (headlights, direction indicators, hazard lights, boot lights, passenger compartment lights, glove box light, instrument panel warning lights, etc.) ●●●●●●

Check the operation of the windscreen wiper/washer system, STARTING adjust the sprayers ●●●●●● AND DRIVING Check the position/wear of the windscreen blades ●●●●●● Check front disk brake pad conditions and wear ●●●●●● WARNING MESSAGES Check rear drum brake linings and wear ●●●LIGHTS AND Visually inspect conditions and integrity: bodywork, underbody protection, pipes and hoses (exhaust - fuel supply system - brakes), rubber parts IN AN (boots, sleeves, bushings, etc.) ●●●●●● EMERGENCY Check cleanness of locks on bonnet and boot and lever cleanness and lubrication ●●●●●●

Visually inspect accessory drive belt conditions AND CARE (or every 24 months) ●●●●●● MAINTENANCE Visually inspect tensioning of the accessory drive belt conditions (versions without automatic tensioning device) (or every 24 months) ●●●

Check the clutch pedal and adjust it, if necessary ●●●●●● TECHNICAL SPECIFICATIONS Check the handbrake lever stroke and adjust it, if necessary ●●●●●● Check exhaust emissions ●●●●●● INDEX

153 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 154

Thousands of kilometres 30 60 90 120 150 180 Check antievaporation system ●● Change spark plugs ●●● DASHBOARD AND CONTROLS Replace toothed belt for transmission control (*) ● Replace air cleaner cartridge ●●●

SAFETY Top up fluids (engine coolant, brakes, battery, windscreen washer, etc.) ●●●●●● Check engine control system operation (through diagnosis outlet) ●●●●●● Check for cleanliness of bottom guides of sliding side doors

STARTING STARTING ●●●●●●

AND DRIVING (or every 6 months) Change engine oil and oil filter (or every 24 months) ●●●●●● Change brake fluid (or every 24 months) ●●● WARNING MESSAGES ●●●●●● LIGHTS AND Change pollen filter (or every 12 months) (*) Or every 5 years, independently of the mileage. IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

154 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 155

DIESEL VERSIONS

Thousands of kilometres 30 60 90 120 150 180 DASHBOARD AND CONTROLS Check tyre conditions/wear and adjust pressure, if required ●●●●●●

Check light system operation (headlights, direction indicators, SAFETY emergency lights, boot lights, passenger compartment lights, glove box light, instrument panel warning lights, etc.) ●●●●●● Check the operation of the windscreen wiper/washer system, adjust the sprayers ●●●●●● STARTING STARTING Check the position/wear of the windscreen blades ●●●●●● AND DRIVING Check front disk brake pad conditions and wear ●●●●●● Check rear drum brake linings and wear ●●● WARNING MESSAGES Visually inspect conditions and integrity: bodywork, LIGHTS AND underbody protection, pipes and hoses (exhaust - fuel supply system - brakes), rubber parts (boots, sleeves, bushings, etc.) ●●●●●● IN AN

Check cleanness of locks on bonnet and boot and lever EMERGENCY cleanness and lubrication ●●●●●● Visually inspect accessory drive belt conditions ●●

Visually inspect tensioning of the accessory drive belt conditions AND CARE (versions without automatic tensioning device) ●●MAINTENANCE Check the handbrake lever stroke and adjust it, if necessary ●●●●●● Check exhaust emissions/smokiness ●●●●●● TECHNICAL SPECIFICATIONS INDEX

155 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 156

Thousands of kilometres 30 60 90 120 150 180 Replace accessory drive belt/s ● DASHBOARD

AND CONTROLS Replace diesel fuel filter ●●● Replace air cleaner cartridge ●●● Top up fluids (engine coolant, brakes, battery, windscreen washer, etc.) ●●●●●● SAFETY Check engine control system operation (through diagnosis outlet) ●●●●●● Check the mechanical gearbox oil ●●

STARTING STARTING Check for cleanliness of bottom guides of sliding side doors AND DRIVING (or every 6 months) ●●●●●● Change engine oil and oil filter (Multijet versions with DPF) (*) WARNING MESSAGES

LIGHTS AND Change engine oil and oil filter (Multijet versions without DPF) (or every 24 months) ●●●●●● Change brake fluid (or every 24 months) ●●●

IN AN Change pollen filter (or every 12 months) ●●●●●● EMERGENCY (*) The engine oil and the filter must be replaced when the warning light on the dashboard comes on (see the “Warning lights and messages” section) or at least every 24 months. AND CARE MAINTENANCE If the car is mainly used in towns and cities, change the engine oil and filter every 12 months. TECHNICAL SPECIFICATIONS INDEX

156 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 157

PERIODIC CHECKING DEMANDING ❒ check cleanness of bonnet and boot VEHICLE USE locks and lever cleanness and lubrica- Every 1,000 km or before long journeys, tion;

check and top up if required: ❒ DASHBOARD Should prevailing use of the vehicle be un- visually inspect the conditions of: the AND CONTROLS ❒ engine coolant fluid level; der one of the following specially heavy engine, gearbox, transmission, pipes and conditions: hoses (exhaust - fuel - brakes), rubber ❒ brake fluid level; parts (boots, sleeves, bushes, etc.); ❒ trailer towing; SAFETY ❒ windscreen washer fluid level; ❒ check the battery and the battery fluid ❒ dusty roads; ❒ tyre pressure and conditions; (electrolyte) (this check must be car- ❒ ried out by skilled personnel only or by ❒ short repeated distances (less than 7- operation of lights (headlights, direction 8 km) and with external temperatures the Fiat Dealership – also refer to the indicators, emergency lights, etc.); below zero; instructions provided in the “Battery” STARTING paragraph of this section); AND DRIVING ❒ operation of the windscreen wiper/ ❒ frequently idling engine or long distance ❒ washer system, position and wear of low speed driving (e.g. taxis or door-to- visually check the various drive belt the windscreen and rear window wiper door deliveries) or in case of a long conditions; WARNING

blades (for versions/markets, where MESSAGES

term inactivity; ❒ LIGHTS AND provided); check pollen filter and replace it, if re- ❒ urban driving; quired; Every 3,000 km check the following and ❒ top-up, if required: engine oil level. perform the following inspections more check air cleaner and replace it, if re- frequently than shown on the Scheduled quired. IN AN You are recommended to use Servicing Plan: EMERGENCY PETRONAS LUBRICANTS prod- ucts, designed and produced specifically ❒ check front disk brake pad conditions for Fiat vehicles (see table “Refuelling” in and wear;

section “Technical specifications”). AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

157 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 158

CHECKING FLUID LEVELS DASHBOARD AND CONTROLS Be careful not to confuse the various types of fluids while

SAFETY topping up: they are incom- patible. For this reason, the vehicle may be seriously damaged. STARTING STARTING AND DRIVING

WARNING Do not smoke while working fig. 1 - 1.4 version F0T0083m WARNING MESSAGES LIGHTS AND on the engine compartment. Flammable gases may be present. Risk of fire. IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS 1 engine oil - 2 battery - 3 brake fluid - 4 window/rear window washer fluid - 5 engine coolant - 6 power steering sys- INDEX tem fluid fig. 2 - 1.3 Multijet version F0T0076m 158 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 159

IMPORTANT The oil consumption de- pends on driving style and the conditions under which the vehicle is used. DASHBOARD

IMPORTANT Always top up using engine AND CONTROLS oil of the same type as that already in the engine. SAFETY

fig. 3 - 1.4 version F0T0082m fig. 4 - 1.3 Multijet version F0T0077m WARNING Proceed very carefully inside

ENGINE OIL fig. 3-4 IMPORTANT If the engine oil level results the engine compartment STARTING above the MAX level after the check, go when the engine is hot: risk of burns. AND DRIVING Engine oil check to the Fiat Dealership for restoring the Remember that the electric fan may correct level. start up if the engine is hot: risk of in- Check the oil level a few minutes (about 5) jury. Pay attention to scarves, ties and WARNING IMPORTANT After adding or changing MESSAGES after the engine has stopped, with the ve- other loose fitting garments: they may LIGHTS AND hicle parked on level ground. the oil, let the engine turn over for a few be dragged by moving parts. seconds and wait a few minutes after turn- Extract the test rod A and clean it. Then, ing it off before you check the level.

put it back all the way down and extract IN AN

it again to check that the level ranges be- Engine oil consumption EMERGENCY tween the MIN and MAX levels on the rod. The range between the MIN and The maximum engine oil consumption is Exhausted engine oil and oil MAX levels corresponds to approxi- usually 400 grams every 1000 km. filter contain substances mately 1 litre of oil. When the vehicle is new, the engine needs which are dangerous for the AND CARE to be run in. Therefore, the engine oil con- environment. For oil and filter MAINTENANCE Topping up the engine oil sumption can only be considered stabilised changing, we recommend contacting a Fiat Dealership. If the oil level is near or even under the after the first 5,000 - 6,000 km. MIN line, add oil through the filler B to TECHNICAL

reach the MAX line. SPECIFICATIONS Oil level must never exceed the MAX line. INDEX

159 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 160

PARAFLUUP antifreeze is used in the engine cooling system. Use fluid of the same type DASHBOARD

AND CONTROLS contained in the cooling system for top- ups. PARAFLUUP may not be mixed with other types of fluids. If it is, do not start the engine and contact the Fiat SAFETY Dealership.

fig. 5 F0T0078m fig. 6 F0T0079m WARNING STARTING STARTING FLUID FOR ENGINE WINDSCREEN/REAR WINDOW AND DRIVING COOLING SYSTEM When the engine is extreme- WASHING FLUID ly hot, do not remove the The coolant level must be checked when cap from the vessel: risk of burns. The To add fluid lift the cap A-fig. 6 and pour the engine is cold and must not drop be- cooling system is pressurised. If re- in a mixture of water and TUTELA WARNING MESSAGES LIGHTS AND low the MIN line on the vessel. quired, replace the cap with an orig- PROFESSIONAL SC 35 fluid, in the following proportions: If the level is too low, slowly pour a mixture inal spare part so as not to jeopardise of 50% distilled water and of PETRONAS system efficiency. ❒ 30% of TUTELA PROFESSIONAL LUBRICANTS PARAFLUUP into the SC 35 and 70% of water in summer; IN AN filler A-fig. 5 of the vessel. EMERGENCY ❒ 50% of TUTELA PROFESSIONAL A 50-50 mixture of PARAFLUUP and SC 35 and 50% of water in winter. distilled water gives freeze protection up to –35°C. In case of temperatures below –20°C, use undiluted TUTELA PROFESSIONAL AND CARE

MAINTENANCE When the vehicle is used under particu- SC35 fluid. larly harsh weather conditions, we rec- ommend using a 60-40 mixture of Check level through the reservoir. PARAFLUUP and demineralised water. TECHNICAL SPECIFICATIONS INDEX

160 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 161

WARNING For topping up always use a funnel with built-in filter (mesh smaller than or equal Do not travel with the wind- to 0.12 mm). screen washing reservoir DASHBOARD

empty: the action of the windscreen IMPORTANT Brake fluid absorbs mois- AND CONTROLS washer is essential for improving vis- ture. For this reason, if the vehicle is main- ibility. ly used in areas with a high degree of at- mospheric humidity, the fluid should be replaced at more frequent intervals than SAFETY specified in the “Scheduled servicing plan”. F0T0080m WARNING fig. 7 Some commercial additives BRAKE FLUID STARTING for windscreen washing are Prevent brake fluid which is AND DRIVING flammable. The engine compartment Release cap A-fig. 7. Check that the liq- highly corrosive from coming contains hot parts which could start uid contained in the tank is at the maxi- into contact with painted a fire if they come into contact. mum level. parts. Should that occur, im- WARNING mediately wash with water. MESSAGES Fluid level in the reservoir must not ex- LIGHTS AND ceed the MAX mark. Use the brake fluid shown in the “Fluids

and lubricants” table (see section “Tech- IN AN

nical Specifications”). When opening the EMERGENCY cap A, make sure that no dirt gets into the reservoir. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

161 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 162

WARNING WARNING The brake fluid is poisonous Prevent power steering fluid and highly corrosive. In case from coming into contact DASHBOARD AND CONTROLS of accidental contact, wash the parts with hot engine parts: it is flammable. with water and mild soap and rinse with plenty of water. If swallowed im- mediately call a doctor. SAFETY Oil consumption is extremely fig. 8 F0T0081m low. If another top-up is re- quired after only a short pe- WARNING riod of time, have the system STARTING STARTING POWER STEERING AND DRIVING The symbol π on the con- checked for leakage at a Fiat Dealer- tainer indicates a synthetic SYSTEM FLUID ship. brake fluid, which is different from a Unscrew the cap A-fig. 8. Check that the mineral fluid. Use of a mineral type fluid contained in the tank is between the WARNING MESSAGES fluid will damage the special rubber LIGHTS AND MIN and MAX levels visible on the reser- seals of the braking system beyond re- voir. The level may go over the MAX line pair. when the oil is hot. If topping up is required, make sure the IN AN new oil has the same specifications as that EMERGENCY already in the system. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

162 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 163

AIR CLEANER/ BATTERY REPLACING THE BATTERY POLLEN FILTER If required, replace the battery with a gen- The vehicle fits a low-maintenance battery: uine spare battery having the same speci-

no top-ups with distilled water are need- DASHBOARD fications. AND CONTROLS Have the air cleaner or the pollen filter re- ed in normal conditions of use. placed by a Fiat Dealership. If a battery with different specifications is A periodic check is however required to fitted, the service intervals given in the make sure that the battery is in efficient “Scheduled servicing plan” in this section SAFETY conditions. Have it performed by the Fiat will no longer be valid. Dealership or skilled personnel only. Follow the battery manufacturer’s in- structions for maintenance. STARTING STARTING WARNING AND DRIVING The battery fluid is poiso- nous and corrosive. Avoid contact with the skin and eyes. Keep WARNING MESSAGES naked flames and sources of sparks Incorrect assembly of electric LIGHTS AND away from the battery: risk of explo- and electronic devices may sion and fire. cause severe damage to your vehicle. Go to a Fiat Dealer-

ship if, after buying the vehicle, you IN AN

want to install accessories (alarms, mo- EMERGENCY bile phone, etc.): they will suggest the WARNING most suitable devices and advise you Running the battery with an if a higher capacity battery needs to be excessively low liquid level installed. AND CARE will damage the battery beyond re- MAINTENANCE pair and even cause an explosion. TECHNICAL SPECIFICATIONS INDEX

163 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 164

USEFUL ADVICE The battery is also more prone to the risk Batteries contain substances of freezing (e.g. already at –10°C). Refer that can be very dangerous TO EXTEND THE LIFE OF YOUR BATTERY to the paragraph “Vehicle inactivity” in for the environment. It is ad- “Starting and driving” if the vehicle is left DASHBOARD AND CONTROLS visable to have the battery re- To avoid draining your battery and make parked for a long time. placed by a Fiat Dealership where it its life longer, observe the following indi- will be disposed of according to the cations: If, after buying the vehicle, you want to in- law. stall electric accessories which require SAFETY ❒ when you park the vehicle, ensure the permanent electric supply (alarm, etc.) doors, tailgate and bonnet are closed contact the Fiat Dealership whose quali- properly; fied personnel, in addition to suggesting If the vehicle remains unused ❒ switch off all lights inside the vehicle: the the most suitable devices, will evaluate the for a long time at very low vehicle is however equipped with a sys- overall electric absorption, checking STARTING STARTING

AND DRIVING temperatures, remove the tem which switches all internal lights off whether the vehicle electric system is ca- battery and take it to a warm automatically; pable of withstanding the load required, place to avoid freezing. or whether it should be integrated with ❒ do not keep accessories (e.g. sound sys- a more powerful battery. tem, emergnecy lights, etc.) switched WARNING MESSAGES LIGHTS AND on for a long time when the engine is Since these devices continue absorbing en- not running; ergy even when the ignition key is off, they WARNING gradually run down the battery. Whenever an operation on ❒ before performing any operation on the IN AN the battery or near it is re- electrical system, disconnect the bat- EMERGENCY quired, always protect your eyes with tery negative cable; special goggles. ❒ battery terminals shall always be per- fectly tightened. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

164 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 165

WHEELS AND TYRES ❒ a tyre will age even if it is not used much. Cracks in the tread and on the Check the pressure of each tyre, includ- sidewalls are a sign of ageing. Have the tyres checked by specialised personnel ing the spare wheel, approximately once DASHBOARD every two weeks and before starting a if they have been fitted for longer than AND CONTROLS long journey: this check must be per- 6 years. Remember to check the spare formed with the tyre rested and cold. wheel very carefully.

❒ SAFETY It is normal for pressure to increase when In case of replacement, always fit new the vehicle is used. For the correct tyre tyres, avoiding those with an unknown inflation pressure, see “Wheels” in “Tech- fig. 9 F0T0013m origin. nical specifications” section. ❒ If a tyre is replaced, also change the in-

Incorrect pressure causes abnormal tyre IMPORTANT NOTES flation valve. STARTING AND DRIVING wear fig. 9: ❒ Avoid braking suddenly, burning starts ❒ To allow even wear between the front A normal pressure: evenly worn tread; and violent knocks against the curb, and rear tyres, it is advisable to change potholes or other obstacles if possible. them every 10-15 thousand kilometres, B low pressure: tread particularly worn WARNING Long distances on rough roads may keeping them on the same side of the MESSAGES on the edges; damage the tyres; vehicle so as not to reverse the direc- LIGHTS AND tion of rotation. C excessive pressure: tread particularly ❒ check the tyres regularly for cuts on the worn in the middle. sides, swelling or irregular tread wear. Go to a Fiat Dealership if required. IN AN The tyres must be replaced when the EMERGENCY tread is less than 1.6 mm thick. In all cas- ❒ Do not overload your vehicle: this may es, follow the laws in force in the coun- cause serious damage to wheels and try where you are driving. tyres;

❒ AND CARE if a tyre is punctured, stop the vehicle MAINTENANCE immediately and charge it to avoid dam- age to the tyre, the rim, suspensions and steering system; TECHNICAL SPECIFICATIONS INDEX

165 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 166

WARNING WARNING RUBBER HOSES Remember that road holding Do not cross switch the also depends on the correct tyres, moving them from the As far as the brake system and fuel rubber

DASHBOARD hoses are concerned, carefully follow the AND CONTROLS tyre inflation pressure. right of the vehicle to the left and vice versa. instructions provided in the “Scheduled servicing plan” in this section. Ozone, high temperatures and prolonged SAFETY lack of fluid in the system may cause hard- WARNING WARNING ening and cracking of the hoses, with pos- If the pressure is too low the sible leaks. Careful inspections are there- tyre overheats and this can Never submit alloy rims to fore necessary. cause serious damage. repainting treatments re- STARTING STARTING

AND DRIVING quiring the use of temperatures ex- ceeding 150°C. The mechanical prop- erties of the wheels could be im- paired. WARNING MESSAGES LIGHTS AND IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

166 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 167

WINDSCREEN/ A few simple precautions can reduce the REAR WINDOW WIPER possibility of damage to the blades: A ❒ make sure that the rubber part is not

(for versions/markets, where provided) DASHBOARD stuck to the windscreen at sub-zero A AND CONTROLS temperatures. Use an antifreeze prod- BLADES uct to release it if required. ❒ Periodically clean the rubber part using remove the snow from the window: SAFETY special products; TUTELA PROFES- this will avoid overstressing the elec- trical motor in addition to protecting SIONAL SC 35 is recommended. F0T0087m the blades; fig. 10 Replace the blades if the rubber edge is de- ❒ do not operate the windscreen and the formed or worn. In all cases, it is advis- Replacing the STARTING

rear screen wipers on dry glass. AND DRIVING able to replace them approximately once windscreen wiper blades a year. Proceed as follows: ❒ lift the windscreen wiper arm and posi- WARNING WARNING MESSAGES tion the blade so that it forms an angle LIGHTS AND Driving with worn wiper of 90° with the arm itself; blades is a serious hazard, because visibility is reduced in bad ❒ exert pressure on the straps A-fig. 10

weather. and remove the blade arm; IN AN EMERGENCY ❒ install the new blade by inserting the straps into the supplied housings of the arm. Make sure that the new blade is secured in position. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

167 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 168 DASHBOARD AND CONTROLS SAFETY

fig. 11 F0T0213m fig. 12 F0T0090m fig. 13 F0T0214m

STARTING STARTING Replacing the rear window wiper SPRAY NOZZLES Rear window AND DRIVING blade If the jet of fluid is inadequate, firstly check (rear window washer) (for versions/markets, where provided) that there is fluid in the vessel of the wind- Rear window washer jets are fixed. The Proceed as follows: screen/rear window wiper (for ver- nozzle holder is on the rear window (see WARNING MESSAGES sions/markets, where provided) (see LIGHTS AND fig. 13). ❒ lift the cover A-fig. 11 and disassemble “Checking fluid levels” in this section). the arm from the vehicle by turning the nut B securing it to the rotation pin; Then, make sure that the outlet holes are not clogged. Unclog them using a needle, IN AN ❒ fit the new arm, positioning it correct- if required. EMERGENCY ly, and fully tighten the nut; ❒ lower the cover. Front window (window washer) Front window washer jets are fixed. The

AND CARE nozzle holders are positioned under the MAINTENANCE bonnet (see fig. 12). TECHNICAL SPECIFICATIONS INDEX

168 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 169

BODYWORK These are the most important technolo- VEHICLE BODY gies: AND UNDERBODY WARRANTY ❒ PROTECTION FROM painting products and systems which Your vehicle is covered by warranty DASHBOARD WEATHER CONDITIONS give the vehicle particular resistance to against perforation due to rust of any orig- AND CONTROLS corrosion and abrasion; inal element of the structure or body. The main causes of corrosion are the fol- ❒ lowing: use of galvanised (or pre-treated) steel For the general terms of this warranty, re- sheets with high resistance to corro- fer to the Fiat Warranty Booklet. SAFETY ❒ atmospheric pollution; sion; ❒ salty air and humidity (coastal areas or ❒ spraying the underbody, engine com- hot humid climates); partment, wheelhouse internal parts and other parts with highly protective ❒ seasonal environment conditions. STARTING wax products; AND DRIVING Equal importance must be attributed to ❒ spraying of plastic parts with a protec- the abrasive action of wind-borne atmos- tive function in the more exposed pheric dust as well as sand and mud and points: underdoor, inner fender parts, WARNING MESSAGES gravel raised by other vehicles. edges, etc.; LIGHTS AND On your vehicle Fiat has adopted the best ❒ use of “open” boxed sections to pre- manufacturing technologies to effectively vent condensation and pockets of mois- protect the bodywork against corrosion. ture from triggering rust inside. IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

169 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 170

ADVICE FOR PRESERVING To correctly wash the vehicle: Some automatic systems pro- THE BODYWORK ❒ remove the aerial from the roof to pre- vided with old generation vent damage to it if the vehicle is and/or not correctly main-

DASHBOARD Paint AND CONTROLS washed in an automatic system; tained brushes may damage Paintwork does not only serve an aes- ❒ the varnish, easing the creation of mi- wash the body using a low pressure jet cro-scratches, especially on dark thetic purpose, but also protects the un- of water; derlying sheet metal. colours. To remove those scratches, SAFETY ❒ wipe a sponge with a slightly soapy so- slightly polish with a specific product. Touch up abrasions and scratches immedi- lution over the bodywork, frequently ately to prevent the formation of rust. On- rinsing with the sponge; ly use genuine spare paint products for touch-ups (see “Bodywork paint identifi- ❒ rinse well with water and dry with a jet STARTING STARTING cation plate” in the “Technical Specifica- of air or a chamois leather. Dry the less visible parts particularly care- AND DRIVING tions” section). fully, such as the door frames, bonnet and If the vehicle is washed in an automatic car the headlight frames, where water may Normal maintenance of paintwork con- wash, follow these recommendations: stagnate more easily. It is a good idea to sists in washing the vehicle: the frequen- – remove the antenna from the roof to leave the vehicle outdoors for a while af- WARNING MESSAGES LIGHTS AND cy depends on the conditions and envi- avoid damages; ter washing it to give water time to evap- ronment where the vehicle is used. orate. – water with a cleansing solution must be For example, it is advisable to wash the ve- used for washing; Do not wash the vehicle after it has been hicle more often in areas with a high en- IN AN parked in the sun or when the engine bon- – rinse accurately to avoid cleansing so- EMERGENCY vironmental pollution or on roads sprin- net is hot: this could take the shine off the kled with salt. lution residues which may remain on the paint. body or hidden parts. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

170 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 171

Exterior plastic parts must be cleaned in Windows Engine compartment the same way as the rest of the vehicle. Where possible, do not park the vehicle Use specific window cleaner products. At the end of each winter, thoroughly under trees; the resinous substance re- Use also clean cloths to avoid scratching wash the engine compartment taking care DASHBOARD leased by many species give the paint a dull the glass or damaging the transparency. not to direct the water jet against the elec- AND CONTROLS tronic control units and the relay/fuse con- appearance and increase the possibility of IMPORTANT Wipe the rear window in- triggering rust processes. trol unit on the left side of the engine com- side gently with a cloth in the direction partment (running direction). Have this IMPORTANT Bird droppings must be of the filaments to avoid damaging the operation performed at a specialised SAFETY washed off immediately and thoroughly as heating device. workshop. the acid they contain is particularly ag- gressive. IMPORTANT Perform this operation on a cold engine and with the key at STOP.

After the washing operation, make sure STARTING that the various protections (e.g. rubber AND DRIVING caps and guards) have not been removed Detergents cause water pol- or damaged. lution. The vehicle should be WARNING MESSAGES washed in areas equipped for Front headlights LIGHTS AND collecting and purifying the liquid used in the washing process. IMPORTANT Never use aromatic sub- stances (e.g.: petrol) or ketenes (e.g.: ace-

tone) for cleaning front headlight plastic IN AN

lens. EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

171 151-172 QUBO GB 1ed:- 3-12-2009 12:01 Pagina 172

INTERIORS CLEANING SEATS STEERING WHEEL/GEARBOX AND FABRIC PARTS LEVER KNOB/HANDBRAKE Periodically check that water is not trapped Remove dust with a soft brush or a vacu- COATED WITH REAL LEATHER

DASHBOARD under the mats (due to water dripping off (for versions/markets, where provided) AND CONTROLS um cleaner. It is advisable to use a moist shoes, umbrellas, etc.) which could cause brush on velvet upholstery. oxidisation of the sheet metal. These components must be cleaned with Rub the seats with a sponge moistened mild soap and water only. Never use spir- it and/or alcohol based products. SAFETY with a solution of water and neutral de- tergent. Before using specific products for clean- ing the interiors, carefully read the in- WARNING structions on the product label and ensure CLEANING PLASTIC PARTS Never use flammable prod- that it does not contain alcohol and/or al- STARTING STARTING cohol-based substances. AND DRIVING ucts, such as petrol, ether or It is advisable to clean interior plastic parts rectified petrol, to clean the vehicle with a moist cloth and a solution of wa- If drops of the specific product for clean- interior. The electrostatic charges ter and mild soap. Remove grease and ing windows accidentally falls onto the which are generated by rubbing dur- tough stains using specific solvent-free leather of the steering wheel / gear lever products for cleaning plastic parts specif- WARNING

MESSAGES ing cleaning operations may cause a

LIGHTS AND knob during windscreen window washing, fire. ically designed to prevent damage to the immediately wipe the drops away and then appearance and colour of the treated wash the area with mild soap and water. parts. IMPORTANT If a lock device is installed IN AN IMPORTANT Never use spirit or petro-

EMERGENCY on the steering wheel, maximum care WARNING leum to clean the instrument panel. must be taken during installation in order Do not keep aerosol cans in to prevent abrasions of the leather up- the vehicle: risk of explosion. holstery.

AND CARE Aerosol cans must not be exposed to

MAINTENANCE a temperature exceeding 50°C. When the vehicle is exposed to sunlight, in- ner temperature can greatly exceed this value. TECHNICAL SPECIFICATIONS INDEX

172 173-193 QUBO GB 1ed:177-201 Fiorino GB 1ed 4-12-2009 9:38 Pagina 173

TTEECCHHNNIICCAALL SSPPEECCIIFFIICCAATTIIOONNSS

IDENTIFICATION DATA ...... 174 DASHBOARD AND CONTROLS ENGINE CODES - BODYWORK VERSIONS...... 176 ENGINE ...... 177 FUEL FEED/IGNITION ...... 178 SAFETY TRANSMISSION ...... 178 BRAKES ...... 179 STARTING STARTING

SUSPENSIONS ...... 179 AND DRIVING STEERING ...... 179 WHEELS ...... 180 WARNING MESSAGES DIMENSIONS ...... 183 LIGHTS AND PERFORMANCE ...... 184 WEIGHTS ...... 185 IN AN

CAPACITIES ...... 186 EMERGENCY FLUIDS AND LUBRICANTS ...... 187 FUEL CONSUMPTION ...... 189 AND CARE

CO2 EMISSIONS ...... 190 MAINTENANCE RADIO FREQUENCY REMOTE CONTROL: MINISTERIAL TYPE-APPROVALS ...... 191 TECHNICAL SPECIFICATIONS INDEX

173 173-193 QUBO GB 1ed:177-201 Fiorino GB 1ed 4-12-2009 9:38 Pagina 174

IDENTIFICATION DATA

We recommend taking note of the iden-

DASHBOARD tification codes. The identification data AND CONTROLS stamped on the plates and their respec- tive positions are as follows, fig. 1: A Model plate. SAFETY B Chassis marking. C Bodywork paint identification plate. fig. 1 F0T0175m fig. 2 F0T0011m D Engine marking. STARTING STARTING MODEL PLATE fig. 2 G Maximum vehicle weight on front AND DRIVING axle. This plate is applied to the back of the ve- hicle and shows the following identifica- H Maximum vehicle weight on rear axle. tion data: I Engine type. WARNING MESSAGES LIGHTS AND B Type-approval number. L Body version code. C Vehicle type code. M Spare part code. D Chassis number. IN AN N Smoke opacity index (for diesel en- EMERGENCY E Maximum vehicle weight fully loaded. gines). F Maximum vehicle weight fully loaded with trailer. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

174 173-193 QUBO GB 1ed:177-201 Fiorino GB 1ed 4-12-2009 9:38 Pagina 175

ENGINE MARKING Engine marking is stamped on the cylinder block and includes the model and the DASHBOARD

chassis number. AND CONTROLS SAFETY

fig. 3 F0T0084m fig. 4 F0T0012m

CHASSIS MARKING BODYWORK PAINT STARTING AND DRIVING This is stamped on the passenger com- IDENTIFICATION PLATE fig. 4 partment floor near the front right seat. This plate is applied inside the bonnet and Access to this marking is gained by slid- shows the following data: WARNING MESSAGES ing the door forward, A-fig. 3. A - Paint manufacturer. LIGHTS AND The chassis marking includes: B - Colour name. ❒ the vehicle model (ZFA 225000);

C - Fiat colour code. IN AN

❒ the chassis progressive number. D - Re-spray and touch up code. EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

175 173-193 QUBO GB 1ed:177-201 Fiorino GB 1ed 4-12-2009 9:38 Pagina 176

ENGINE CODES - BODYWORK VERSIONS

Engine code Bodywork versions DASHBOARD AND CONTROLS Qubo N1 Qubo M1

SAFETY 1.4 KFV – 225 AXA1A 00B – 225 AXA1A 00F

1.3 Multijet 199A2000 225 CXB1A ZA6 225 AXB1A 01D 225 CXB1A ZA7 225 AXB1A 01H

STARTING STARTING 225 CXB1A ZA10 225 AXB1A 01P

AND DRIVING 225 CXB1A ZA11 225 AXB11 02D 225 CXB1A ZA12 225 CXB1A ZA15 225 CXB1A ZA22 WARNING MESSAGES 225 CXB11 ZA6 LIGHTS AND IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

176 173-193 QUBO GB 1ed:177-201 Fiorino GB 1ed 4-12-2009 9:38 Pagina 177

ENGINE

GENERAL INFORMATION 1.4 1.3 Multijet DASHBOARD AND CONTROLS Engine code KFV 199A2000

Cycle Otto Diesel SAFETY Number and layout of cylinders 4 in line 4 in line

Piston bore and stroke mm 75 x 77 69.6 x 82

3

Total displacement cm 1360 1248 STARTING AND DRIVING Compression ratio 10.5 17.6

Maximum power (EEC) kW 54 55

HP WARNING 73 75 MESSAGES corresponding ratio rpm 5200 4000 LIGHTS AND

Maximum torque (EEC) Nm 118 190 kgm 12 19.4 IN AN corresponding ratio rpm 2600 1750 EMERGENCY

Spark plugs Champion RC8YL – Fuel Unleaded petrol 95 RON Diesel fuel for

(EN228 Specifications) motor vehicles AND CARE (EN590 specifications) MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

177 173-193 QUBO GB 1ed:177-201 Fiorino GB 1ed 4-12-2009 9:38 Pagina 178

FUEL FEED/IGNITION DASHBOARD AND CONTROLS 1.4 1.3 Multijet Fuel feed Electronic injection Direct injection Multijet Sequential multipoint Controlled “Common Rail” SAFETY synchronised, electronic returnless system with turbo and intercooler STARTING STARTING AND DRIVING TRANSMISSION

1.4 - 1.3 Multijet WARNING MESSAGES LIGHTS AND Gearbox Five forward gears plus reverse with synchronisers for engagement of forward gears Clutch Mechanical control (1.4 versions)/Hydraulic control (1.3 Multijet versions) IN AN

EMERGENCY Drive Front AND CARE

MAINTENANCE Modifications or repairs to the fuel feed system that are not carried out properly or do not take the system tech- nical specifications into account can cause malfunctions leading to the risk of fire. TECHNICAL SPECIFICATIONS INDEX

178 173-193 QUBO GB 1ed:177-201 Fiorino GB 1ed 4-12-2009 9:38 Pagina 179

BRAKES

1.4 - 1.3 Multijet DASHBOARD Service brakes: AND CONTROLS – front Disk brakes

– rear Drum brakes SAFETY Parking brake Controlled by hand lever, acting on rear brakes

IMPORTANT Water, ice and salt sprinkled on the roads may deposit on the brake disks reducing braking efficiency the first time STARTING STARTING

the brakes are engaged. AND DRIVING

SUSPENSIONS WARNING MESSAGES 1.4 - 1.3 Multijet LIGHTS AND

Front Mc Pherson independent wheels IN AN

Rear Crank axle EMERGENCY

STEERING AND CARE MAINTENANCE 1.4 - 1.3 Multijet Type Rack and pinion with hydraulic power steering TECHNICAL Minimum steering SPECIFICATIONS cycle m 10.55 INDEX

179 173-193 QUBO GB 1ed:177-201 Fiorino GB 1ed 4-12-2009 9:38 Pagina 180

WHEELS Load rating (capacity) 60 = 250 kg 84 = 500 kg RIMS AND TYRES 61 = 257 kg 85 = 515 kg DASHBOARD AND CONTROLS Pressed steel or alloy rims. Tubeless ra- 62 = 265 kg 86 = 530 kg dial carcass tyres. All approved tyres are 63 = 272 kg 87 = 545 kg listed in the Log Book.

SAFETY 64 = 280 kg 88 = 560 kg IMPORTANT In the event of discrepan- cies between the information provided on 65 = 290 kg 89 = 580 kg this “Owner handbook” and the “Log fig. 5 F0T0014m 66 = 300 kg 90 = 600 kg book”, consider the specifications shown 67 = 307 kg 91 = 615 kg STARTING STARTING in the log book only. UNDERSTANDING AND DRIVING 68 = 315 kg 92 = 630 kg Respect the prescribed size to ensure TYRE MARKING fig. 5 safety of the vehicle in movement. Fit tyres 69 = 325 kg 93 = 650 kg of the same make and type on all wheels. Example: 175/70 R 14 91T 70 = 335 kg 94 = 670 kg WARNING MESSAGES LIGHTS AND IMPORTANT Do not use inner tubes 175 = Nominal width (S, distance in mm 71 = 345 kg 95 = 690 kg with Tubeless tyres. between sidewalls). 72 = 355 kg 96 = 710 kg 70 = Height/width ratio (H/S) in per- 73 = 365 kg 97 = 730 kg IN AN centage. 74 = 375 kg 98 = 750 kg EMERGENCY SPARE WHEEL R = Radial tyre. 75 = 387 kg 99 = 775 kg Pressed steel rim Tubeless tyre. 14 = Rim diameter in inches (Ø). 76 = 400 kg 100 = 800 kg 91 77 = 412 kg 101 = 825 kg AND CARE WHEEL GEOMETRY = Load rating (capacity). MAINTENANCE Toe-in measured between rims: –1 ±1 T = Maximum speed rating. 78 = 425 kg 102 = 850 kg mm. 79 = 437 kg 103 = 875 kg The values refer to the vehicle in running 80 = 450 kg 104 = 900 kg TECHNICAL order. SPECIFICATIONS 81 = 462 kg 105 = 925 kg 82 = 475 kg 106 = 950 kg 83 = 487 kg INDEX

180 173-193 QUBO GB 1ed:177-201 Fiorino GB 1ed 4-12-2009 9:38 Pagina 181

Maximum speed rating UNDERSTANDING Q = up to 160 km/h. RIM MARKING fig. 5

R = up to 170 km/h. Example: 5 1/2J x 14 H2 ET 44 DASHBOARD AND CONTROLS

S = up to 180 km/h. 5 1/2 = Rim diameter in inches (1). T = up to 190 km/h. J = rim drop centre outline (side U = up to 200 km/h. projection where the tyre bead SAFETY rests) (2). H = up to 210 km/h. 14 = rim nominal diameter in inches fig. 6 F0T0000m V = up to 240 km/h. (corresponds to diameter of the

tyre to be mounted) (3 = Ø). RIM PROTECTOR TYRES fig. 6 STARTING

W = up to 270 km/h. AND DRIVING Y = up to 300 km/h. H2 = shape and number of the humps (circumference relief, holding in- to its seat the bead of the Tube- WARNING WARNING less tyre on the rim). MESSAGES Maximum speed rating If after-sale tyres with rim LIGHTS AND for snow tyres ET 44 = wheel camber angle (distance protector are used (fig. 6) between the disc/rim supporting and the car has integral caps fixed (by QM + S = up to 160 km/h. plane and the wheel rim centre springs) to the sheet wheel, DO NOT line). fit wheel caps. The use of unsuitable IN AN TM + S = up to 190 km/h. tyres and wheel caps could cause a EMERGENCY HM + S = up to 210 km/h. sudden pressure loss of the tyre. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

181 173-193 QUBO GB 1ed:177-201 Fiorino GB 1ed 4-12-2009 9:38 Pagina 182

VERSIONS RIMS TYRES SPARE WHEEL (for versions/markets, where provided) In std supply Snow Rim Tyre DASHBOARD AND CONTROLS 6J x 15 H2 – ET44 185/65 R15 88 T 185/65 R15Q (M+S) 6J x 15 H2 – ET44 185/65 R15 1.4 _ 6J x 16 ET 45 195/55 R16 87H 6J x 16 ET 45 195/55 R16

SAFETY 6J x 15 H2 – ET44 185/65 R15 88 T 185/65 R15Q (M+S) 6J x 15 H2 – ET44 185/65 R15 1.3 Multijet 185/65 R15T (M+S) (*) 6J x 15 H2 – ET44 185/65 R15 _ 6J x 16 ET 45 195/55 R16 87H 6J x 15 H2 – ET 44 (●) 185/65 R15 (●)

STARTING STARTING (*) Versions QUBO Trekking AND DRIVING (●) Correctly using this spare wheel necessarily involves complying with the WARNING below:

WARNING WARNING MESSAGES LIGHTS AND Never use it for more than strictly necessary and never exceed 80 km/h. On the spare wheel there is an orange label, summarizing the main warnings about the spare wheel usage restrictions. Never remove or cover the la- bel. The label contains the following indications in four languages: Warning! For temporary use only! 80 km/h max! Re- place as soon as possible with a standard service wheel. Never cover this indication. IN AN EMERGENCY COLD TYRE INFLATION PRESSURES (bar) AND CARE

MAINTENANCE Tyre size TYRES SUPPLIED SPARE WHEEL Loadless Medium load Full load (for versions/markets, Front Rear Front Rear Front Rear where provided) 185/65 R15 88 T 2.3 2.1 2.3 2.1 2.3 2.5 2.5 TECHNICAL

SPECIFICATIONS 195/55 R16 87 H 2.3 2.1 2.3 2.1 2.4 2.4 2.5

Add +0.3 bar to the prescribed inflation pressure when the tyres are warm. Recheck pressure value with cold tyres.

INDEX With snow tyres, add +0.2 bar to the inflation pressure value prescribed for standard tyres. When running over 160 km/h, inflate tyres at full load inflation values. 182 173-193 QUBO GB 1ed:177-201 Fiorino GB 1ed 4-12-2009 9:38 Pagina 183

DIMENSIONS

Dimensions are expressed in mm and re-

fer to the vehicle fitted with standard DASHBOARD tyres. AND CONTROLS The height refers to the loadless vehicle. SAFETY STARTING STARTING AND DRIVING WARNING MESSAGES LIGHTS AND IN AN EMERGENCY fig. 7 F0T0301m

ABCD EFGH AND CARE MAINTENANCE

1735 QUBO versions 3959 855 2513 591 1472 1716 1464 1794 (●) TECHNICAL QUBO Trekking 3970 866 2513 591 1742 1472 1716 1464 SPECIFICATIONS versions 1803 (●)

Track measurements may vary according to rim size. INDEX (●) With roof bars (for versions/markets, where provided) 183 173-193 QUBO GB 1ed:177-201 Fiorino GB 1ed 4-12-2009 9:38 Pagina 184

PERFORMANCE

Top admitted speed after initial vehicle use in km/h. DASHBOARD AND CONTROLS

1.4 1.3 Multijet

SAFETY 155 155 STARTING STARTING AND DRIVING WARNING MESSAGES LIGHTS AND IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

184 173-193 QUBO GB 1ed:177-201 Fiorino GB 1ed 4-12-2009 9:38 Pagina 185

WEIGHTS Weights (kg) 1.4 1.3 Multijet

Versions MI Versions NI Versions NI Versions MI DASHBOARD (5 seats) Minimum Maximum (5 seats) AND CONTROLS (4 seats multi (4 seats multi transporter) transporter) SAFETY Loadless weight (with all fluids, fuel tank filled to 90% and without optional equipment): 1180 1205 1300 1200 Payload including the STARTING STARTING

driver (*): 510 550 455 510 AND DRIVING Payload including the driver (*): 440 475 – 440 Maximum admitted loads (**) WARNING MESSAGES – front axle: 950 950 950 950 LIGHTS AND – rear axle: 950 950 950 950 – total: 1690 1755 1755 1710

Towable loads IN AN – trailer with brakes: 600 600 600 600 EMERGENCY – trailer without brakes: 400 400 400 400 Maximum load on roof

(with roof bars) (***): 50 50 50 50 AND CARE MAINTENANCE Maximum load on tow hitch (trailer with brakes): 60 60 60 60 TECHNICAL

Note Versions Adventure have the same payloads as the other versions. SPECIFICATIONS (*) CATEGORY N1: the payload on full optional versions (110 Kg) is progressively reduced until 500 Kg. CATEGORY M1: the options are included in the payload.

(**) Loads not to be exceeded. The driver is responsible for arranging the loads in the boot and/or on the roof so that they comply with these INDEX limits. (***) Including weight of any applied loading system (bars/basket by Lineaccessori Fiat). 185 173-193 QUBO GB 1ed:177-201 Fiorino GB 1ed 4-12-2009 9:38 Pagina 186

CAPACITIES

1.4 1.3 Multijet Specified fuels DASHBOARD AND CONTROLS Genuine products litres kg litres kg Fuel tank: 45 – 45 () – Unleaded petrol SAFETY including a reserve of: 6÷7 – 6÷7 () – of at least 95 RON (EN228 Specifications) ()Diesel fuel for motor vehicles (EN590 Specifications)

STARTING STARTING Engine cooling system Mixture of 50% water and AND DRIVING – with climate control: 7.35 – 7.6 – PARAFLUUP (▲) Engine sump: 2.7 2.4 3.0 () 2.6 () SELENIA MULTIPOWER Engine sump and filter: 3.0 2.6 3.2 () 2.8 () (●) SELENIA WR P.E. WARNING MESSAGES LIGHTS AND Gearbox/differential casing: 1.9 (■) 1.70 (■) 1.98 1.8 TUTELA CAR TECHNYX (■) TUTELA CAR EXPERYA Hydraulic power steering 0.38 0.35 0.38 0.35 TUTELA GI/E IN AN

EMERGENCY Hydraulic brake circuit with ABS system: – 0.5 – 0.5 TUTELA TOP 4 Windscreen/rear window Mixture of water and

AND CARE washer fluid reservoir 3.0 – 3.0 – TUTELA MAINTENANCE PROFESSIONAL SC 35

(▲) When the vehicle is used under particularly harsh climate conditions, we recommend using a 60-40 mixture of PARAFLUUP and dem-

TECHNICAL ineralised water. SPECIFICATIONS INDEX

186 173-193 QUBO GB 1ed:177-201 Fiorino GB 1ed 4-12-2009 9:38 Pagina 187

FLUIDS AND LUBRICANTS

RECOMMENDED PRODUCTS AND SPECIFICATIONS DASHBOARD AND CONTROLS

Use Fluid and lubricant qualitative specifications Genuine lubricants Replacement for correct vehicle operation and fluids interval SAFETY

SELENIA Second Lubricants for Synthetic lubricant SAE 5W-30, ACEA A1/B1, qualification FIAT 9.55535-G1. MULTIPOWER Scheduled petrol engines Contractual Technical Servicing Plan STARTING STARTING

Reference no. F315.B04 AND DRIVING SELENIA WR P.E. Synthetic oil grade SAE 5W-30, qualification Second Lubricants for Contractual Technical Scheduled diesel engines FIAT 9.55535- S1 Reference no. 510.D07 WARNING Servicing Plan MESSAGES LIGHTS AND

For diesel engines, in emergency cases where genuine products are not available, lubricants with min. performance ACEA C2 are accepted. If this is the case, the best engine performance is not guaranteed. We however recommend replacing the lubri- IN AN cant with those recommended by Fiat Dealership. EMERGENCY The use of products with features lower than ACEA A1/B1 and ACEA C2 could cause engine damage which is not covered by warranty.

If the vehicle is used in particularly cold climates, ask your Fiat Dealership for the right PETRONAS LUBRICANTS. AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

187 173-193 QUBO GB 1ed:177-201 Fiorino GB 1ed 4-12-2009 9:38 Pagina 188

Use Fluid and lubricant qualitative specifications Genuine lubricants Replacement for correct vehicle operation and fluids interval

Synthetic lubricant SAE 75W-85. TUTELA CAR Mechanical gearboxes and DASHBOARD AND CONTROLS Passes the specifications API GL 4 PLUS. TECHNYX differentials Qualification FIAT 9.55530- MX3. Contractual Technical (Diesel versions) Reference F010.B05

SAFETY Synthetic lubricant, grade SAE 75W-80 TUTELA CAR EXPERYA Mechanical gearboxes and Passes specifications API GL 4. Contractual Technical differentials (petrol versions) Qualification FIAT 9.55550. Reference F178.B06 Lubricants and greases for Molybdenum disulphide grease, for use at high temperatures. TUTELA ALL STAR CV joints on wheel side motion Consistency NLGI 1-2. Contractual Technical STARTING STARTING transmission Qualification FIAT 9.55580. Reference F702.G07 AND DRIVING Grease for homokinetic joints with low friction coefficient. TUTELA STAR 700 CV joints Consistency NLGI 0-1. Contractual Technical on differential side Qualification FIAT 9.55580. Reference F701.C07 WARNING MESSAGES LIGHTS AND Lubricant for automatic drives. TUTELA GI/E Hydraulic power steering Passes the specification “ATF DEXRON III”. Contractual Technical Qualification FIAT 9.55550- AG2. Reference F001.C94 Synthetic fluid NHTSA N° 116 DOT 4, ISO 4925, Brake and clutch IN AN TUTELA TOP 4 Brakefluid SAE J-1704, CUNA NC 956-01. hydraulic controls EMERGENCY Contractual Technical Qualification FIAT 9.55597. Reference F001.A93 Inhibited mono ethylene glycol-based antifreeze protection, PARAFLUUP (●) Mixture of Protective fluid red, with organic formulation. Contractual Technical 50% water and 50% of for radiators Passes CUNA NC 956-16, ASTM D 3306 specifications. Reference F101.M01 PARAFLUUP (❑) AND CARE Qualification FIAT 9.555323. MAINTENANCE Additive for diesel fuel, protecting Diesel engines. Additive for TUTELA DIESEL ART To be mixed with fuel oil diesel fluid Contractual Technical (25 cc per 10 litres) Reference F601.L06

TECHNICAL Fluid for Mixture of alcohols and surfactants. TUTELA To be used diluted or SPECIFICATIONS window and Passes specification CUNA NC 956-11. PROFESSIONAL SC 35 undiluted in windscreen/ rear window Qualification FIAT 9.55522. Contractual Technical rear window washer/ washer Reference F201.D02 wiper systems

INDEX (●) IMPORTANT Do not top up or mix with fluids having different specifications from those described here. (❑) When the vehicle is used under particularly harsh climate conditions, we recommend using a 60-40 mixture of PARAFLUUP and 188 demineralised water. 173-193 QUBO GB 1ed:177-201 Fiorino GB 1ed 4-12-2009 9:38 Pagina 189

FUEL CONSUMPTION The procedures below are followed for IMPORTANT The type of route, traffic measuring consumption: and weather conditions, driving style, gen- The fuel consumption figures given in the ❒ eral conditions of the vehicle, trim lev- urban cycle: cold starting followed by el/equipment/accessories, load, climate table below are determined on the basis DASHBOARD driving that simulates urban use of the control system, roof rack, other situations AND CONTROLS of the type-approval tests set down by vehicle; specific European Directives. that affect air drag may lead to different ❒ extraurban cycle: frequent acceler- fuel consumption levels than those mea-

ations in all gears, simulating extraur- sured. SAFETY ban use of the vehicle: speed varies be- tween 0 and 120 km/h; ❒ combined consumption: calculated weighing about 37% of urban cycle con- STARTING STARTING

sumption and about 63% of extraurban AND DRIVING consumption. WARNING MESSAGES LIGHTS AND IN AN

ACCORDING TO EUROPEAN DIRECTIVE IN FORCE (litres x 100 km) EMERGENCY

1.4 1.3 Multijet AND CARE Urban cycle 8.3 5.5 MAINTENANCE Extraurban 5.6 3.7

Combined 6.6 4.4 TECHNICAL SPECIFICATIONS INDEX

189 173-193 QUBO GB 1ed:177-201 Fiorino GB 1ed 4-12-2009 9:38 Pagina 190

CO2 EMISSIONS

The CO2 emission levels at the exhaust given in the following table refer to combined consumption. DASHBOARD AND CONTROLS ACCORDING TO EUROPEAN DIRECTIVE IN FORCE (g/km)

SAFETY 1.4 1.3 Multijet 155 115 STARTING STARTING AND DRIVING WARNING MESSAGES LIGHTS AND IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

190 173-193 QUBO GB 1ed:177-201 Fiorino GB 1ed 4-12-2009 9:38 Pagina 191

RADIO FREQUENCY REMOTE CONTROL: MINISTERIAL TYPE-APPROVALS DASHBOARD AND CONTROLS SAFETY STARTING STARTING AND DRIVING WARNING MESSAGES LIGHTS AND IN AN EMERGENCY AND CARE MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

191 173-193 QUBO GB 1ed:177-201 Fiorino GB 1ed 4-12-2009 9:38 Pagina 192

DASHBOARD The presence and position of the controls, the instruments and the indicators may vary according to the versions. RIGHT HAND DRIVE VERSIONS

F0T0225m fig. 1

1. Vent for air delivery to side windows - 2. Adjustable and directable air vent - 3. Airbag on passenger’s side (where provided) - 4. Emergency light switch, rear heated window, Bluetooth system controls (where provided), rear swing-door unlock device (where provided) - 5. Sound system (where provided) - 6. Left stalk: external lights control - 7. Instrument and warning light panel - 8. Right stalk: windscreen wiper controls, rear window wiper, trip computer - 9. Control panel: fog lights/rear fog light/headlight po- sition adjustment/display - 10. Ignition device - 11. Airbag on driver’s side - 12. Adjustable and directable air vents - 13. Glove box - 14. HVAC controls - 15. Glove box/oddment compartment (where provided) - 16. Stalk for opening bonnet 192 173-193 QUBO GB 1ed:177-201 Fiorino GB 1ed 4-12-2009 9:38 Pagina 193

INSTRUMENT PANEL Versions with digital display A Speedometer (speed indicator) B Fuel level gauge with reserve warning light C Engine coolant temperature gauge and excessive temperature warning light D Rev counter E Digital display

mcWarning lights supplied in diesel versions only

F0T0239m

fig. 2

Versions with multifunctional display RIGHT HAND DRIVE VERSIONS A Speedometer (speed indicator) B Fuel level gauge with reserve warning light C Engine coolant temperature gauge and excessive temperature warning light D Rev counter E Multifunctional display

mcWarning lights supplied in diesel

F0T0240m versions only

193 194-200 QUBO GB 1ed:_ 3-12-2009 12:06 Pagina 194

IINNDDEEXX

ABS system ...... 71 Child carriers ...... 89 Fog lights DASHBOARD AND CONTROLS Added-on electrical/ Childproof device ...... 61 – bulb replacement ...... 135 electronic devices ...... 80 Choke ...... 13 – control ...... 54 Air cleaner/anti/pollen ...... 163 Cigar lighter ...... 57 Follow me home (device) ...... 48 Air outlets ...... 40 Clutch ...... 178 Front roof lights ...... 138-139

SAFETY Airbag ...... 96-98 CO2 emissions ...... 189 Front seat arm rest ...... 56 Alarm ...... 11 Controls ...... 54 Fuel cap ...... 81 Ash tray ...... 57 Fuel system ...... 178 ASR (system)...... 73 Dashboard and controls ...... 4 Fuel Backlight washer Dead lock device ...... 11 – consumption ...... 189 Digital display ...... 16 STARTING STARTING – control ...... 50 – economy ...... 102 AND DRIVING – liquid level ...... 160 Dimensions ...... 183 – system shutoff ...... 55 Backlight wiper Doors Fuses (replacement) ...... 141 – blade ...... 168 – centralized lock/unlock ...... 59 – control ...... 50 – childproof safety ...... 61 Glass cleaning ...... 49 – double panel rear doors ...... 62 Glove box ...... 56 WARNING MESSAGES – nozzle ...... 168 LIGHTS AND Backup light – sliding side doors ...... 60 – bulb replacement ...... 136 DPF...... 82 Handbrake ...... 104 Hazard warning lights ...... 54 Battery E – recharging ...... 149 BD system ...... 70 Head rests ...... 36 IN AN – replacement ...... 163 Engine codes- Engine compartment Headlamps EMERGENCY Body versions ...... 176 (servicing) ...... 171 – beam adjustment abroad ...... 70 Body Engine hood ...... 67 – beam alignment ...... 70 – maintenance ...... 169 Engine oil – leveling ...... 70 – version coding ...... 176 – consumption ...... 159 – trim adjust ...... 70 – level check ...... 161 Heater system/

AND CARE Brake lights

MAINTENANCE – bulb replacement ...... 136 Engine starting ...... 102-120 Heating and ventilation ...... 41 Brake Assist...... 72 Engine High beams Brakes ...... 181 – fuel system ...... 178 – bulb replacement ...... 134 Bulb replacement ...... 130 – identification codes ...... 176 – control ...... 47 Bulkheads ...... 34 – powertrain ...... 178 – flashing ...... 47 TECHNICAL

SPECIFICATIONS – specification ...... 177 High mounted brake lights Capacities ...... 187 Environmental protection ...... 82 – bulb replacement ...... 137 Car radio (provision for) ...... 79 EOBD system ...... 76 Care and maintenance ...... 151 Identification data ...... 174 – heavy duty use of vehicle ...... 157 ESP system...... 72 In an emergency ...... 119 INDEX – routine checks ...... 157 Fiat CODE (system) ...... 7 Instrument board ...... 6 – routine maintenance ...... 152 Fix&Go (device) ...... 126 Instrument panel ...... 5 194 – service plan ...... 153 Fluids and lubricants ...... 190 Instrumentation ...... 14 194-200 QUBO GB 1ed:_ 3-12-2009 12:06 Pagina 195

Interior equipment ...... 56 Radio transmitters Technical specifications ...... 173 Interior ...... 176 and mobile telephones ...... 80 Tyres Isofix seat (provision for installation) ... 93 Raising the vehicle ...... 149 – inflation pressures ...... 182 Rear fog light – replacement ...... 123

Jack ...... 125 DASHBOARD

– bulb replacement ...... 136 – snow tyres ...... 107-182 AND CONTROLS Keys – control rear roof lights ...... 139-140 – standard ...... 182 – mechanical key ...... 8 Rear view mirrors – tyre data ...... 180 – key with remote control ...... 8 – external ...... 37 – Rim Protector ...... 181 Lamps – interior ...... 37 Towing the vehicle ...... 150 SAFETY – bulb types ...... 131 – power-operated ...... 38 Traction Plus system ...... 75 – general ...... 130 Refueling ...... 80 Trailer towing ...... 104 – interior bulb replacement ...... 138 Rim Protector (tyres) ...... 181 Transmission operation ...... 101 – outer lighting bulb replacement ... 133 Roof lights Trip computer ...... 30 – bulb replacement Trunk Lane change function ...... 48 STARTING

Level checks ...... 158 on/off control ...... 51-52-53 – emergency opening ...... 64 AND DRIVING Low beams Roof struts – extension ...... 66 – bulb replacement ...... 134 – retentions ...... 68 – load restraint ...... 67 – control ...... 47 Rubber hoses ...... 166 – shelf removal ...... 65 Luggage rack/ski rack ...... 69 Turn signal lights WARNING MESSAGES Safety ...... 83 – control ...... 48 LIGHTS AND Maintenance and care ...... 151 SBR system ...... 85 – front bulb replacement ...... 134 Manual AC system ...... 44 Seat belt tensioners ...... 86 – lane change function ...... 48 Max. speeds ...... 184 Seat belts (use) ...... 84 – rear bulb replacement ...... 136 Multi/function display ...... 21 Seats – side bulb replacement ...... 135 IN AN

Number plate light – adjustments ...... 33 Vehicle starting and driving ...... 97 EMERGENCY – bulb replacement ...... 137 – cleaning ...... 172 Ventilation ...... 39 – foldaway passenger seat ...... 34 Oddments tray ...... 56 – heated ...... 33 Warning lights and messages ...... 107 Outer lights ...... 47 Snow chains ...... 108 Weights ...... 185 Wheel (changing) ...... 121 AND CARE

Paintwork (maintenance) ...... 170 Spark plugs (type) ...... 177 MAINTENANCE Park sensors ...... 77 Specifications ...... 173 Wheel geometry ...... 180 Parking lights Starting and driving ...... 101 Wheel rims (correct reading) ...... 181 – bulb replacement ...... 133 Stationary vehicle ...... 104 Wheels and tyres ...... 165-180 – control ...... 47 Steering ...... 179 Windscreen washer Partition ...... 35 Steering column controls – control ...... 49 TECHNICAL Performance ...... 184 – left lever ...... 47 – liquid level ...... 160 SPECIFICATIONS Power socket ...... 57 – right lever ...... 49 Windscreen wiper Powertrain ...... 178 Steering lock ...... 13 – blades ...... 167 Prolonged inactivity ...... 106 – control ...... 49

Steering wheel ...... 36 INDEX Provision for installation Sun visors ...... 58 – intelligent wash ...... 49 of pushout side windows ...... 58 Suspensions ...... 179 – nozzles ...... 168 Wiper blades ...... 167-168 – cleaning ...... 173 Symbols ...... 7 195 194-200 QUBO GB 1ed:_ 3-12-2009 12:06 Pagina 196

PROVISIONS FOR THE PROCESSING OF A VEHICLE AT THE END OF ITS LIFE-CYCLE

For years now Fiat has been developing its global commitment towards the safeguarding and protection of the Environment through the continuous improvement of its production processes and the making of increasingly more “eco friendly” products. With a view to guaranteeing the best possible service to clients in full observance of environmental standards and in response to the obligations imposed by European Directive 2000/53/EC on end-of-life vehicles, Fiat offers its clients the possibility to hand in their vehicle* at the end of its life span without additional costs. The European Directive, in fact, provides for the take-back of the vehicle without the last holder or owner of the same incurring expenses due to the fact that the market value of the vehicle is zero or negative. In particular, in almost all of the countries of the European Union, up until 1st January 2007, take-back of the vehicle free of charge only applies to vehicles registered from 1 July 2002 on, while, from 2007 on, take-back will be carried out free of charge, independently of the year of registration, provided that the vehicle still contains all its essential component parts (especially engine and body) and is free from additional waste materials. Our contracted network of authorised treatment facilities has been carefully selected in order to provide a quality service to our customers by de-polluting and recycling “End of Life Vehicles” to approved environmental standards. To find out the location of your nearest authorised treatment facility, offering free of charge take-back, simply contact one of our dealers or refer to the Fiat web site or call the toll free number 00800 3428 0000. * Passenger transportation vehicles to seat a max. of nine persons, having a total admissible weight of 3.5 t 194-200 QUBO GB 1ed:_ 3-12-2009 12:06 Pagina 197

NNOOTTEESS 194-200 QUBO GB 1ed:_ 3-12-2009 12:06 Pagina 198

®

In the heart of your engine.

® Always ask your mechanic for 194-200 QUBO GB 1ed:_ 3-12-2009 12:06 Pagina 199

Oil change? The experts recommend Selenia

The engine of your car is factory filled with Selenia. This is an engine oil range which satisfies the most advanced international specifications. Its superior technical characteristics allow Selenia to guarantee the highest performance and protection of your engine.

The Selenia range includes a number of technologically advanced products:

SELENIA K PURE ENERGY SELENIA MULTIPOWER Synthetic lubricant designed for latest generation, low Particularly ideal for the protection of new generation petrol emission, petrol engines. Its specific formulation warrants engines, very effective even in the most severe weather the utmost protection also for high performance conditions. It guarantees a reduction in fuel consumption turbocharged engines with high thermal stress. (Energy conserving) and it is also ideal for alternative Its low ash content helps to maintain the total cleanliness engines. of modern catalysts. SELENIA SPORT SELENIA WR PURE ENERGY Fully synthetic lubricant capable of meeting the needs of Fully synthetic lubricant that can meet the requirements of high performance engines. the latest diesel engines. Low ash content to protect the Studied to protect the engine also in high thermal stress particulate filter from the residual products of combustion. conditions, it prevents deposits on the turbine to achieve High Fuel Economy System that allows the utmost performance in total safety. considerable fuel saving. It reduces the danger of dirtying the turbine to ensure the The range also includes Selenia StAR Pure Energy, Selenia protection of increasingly high performance diesel Racing, Selenia K, Selenia WR, Selenia 20K, Selenia 20K AR. engines For further information on Selenia products visit the web site www.flselenia.com. 194-200 QUBO GB 1ed:_ 3-12-2009 12:06 Pagina 200

COLD TYRE INFLATION PRESSURES (bar)

Tyre size TYRES SUPPLIED Loadless Medium load Full load Front Rear Front Rear Front Rear

185/65 R15 88 T 2.3 2.1 2.3 2.1 2.3 2.5 195/55 R16 87 H 2.3 2.1 2.3 2.1 2.4 2.4

Add +0.3 bar to the prescribed inflation pressure when the tyres are warm. Recheck pressure value with cold tyres. With snow tyres, add +0.2 bar to the inflation pressure value prescribed for standard tyres. When running over 160 km/h, inflate tyres at full load inflation values.

ENGINE OIL CHANGE 1.4 1.3 Multijet litres kg litres kg Fuel tank 2.7 2.4 3.0 2.6 Engine sump and filter 3.0 2.6 3.2 2.8

FUEL CAPACITIES (litres) 1.4 - 1.3 Multijet Tank capacity 45 Reserve 6÷7 Refuel petrol engines with unleaded petrol with octane rating (RON) no lower than 95 only (EN 228 Specifications) Refuel diesel engines with diesel fuel for motor vehicles only (EN 590 Specifications)

Fiat Group Automobiles S.p.A. - Customer Services - Technical Services - Service Engineering Largo Senatore G. Agnelli, 5 - 10040 Volvera - Torino (Italia) - Print n. 603.81.662 - 11/2009 - 1 ediition