Keep Your Van Safe. Index

SPECIFIC MOUNTING INSTRUCTIONS FOR DIFFERENT VAN MODELS

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

WARNINGS

Make sure that you read the mounting instructions -included in the package- carefully.

The measures indicated in the following pages are recommended but not compulsory.

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the bumper to the Distance from the door track central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template. KEEP YOUR VAN SAFE. INDEX

CITROËN MAN RENAULT

INSTALLATION ON THE REAR DOORTGE INSTALLATION25 ON THE LATERAL DOOR Nemo (2007) 3 (3140) Kangoo (2008) 7 Berlingo (2016) 4 Trafic (2014) 8 MERCEDES Jumpy (2017) 5 Master (2010) 9 Jumper (2015) 6 19 Citan (2012) TOYOTA 20 FIAT Vito (2014) Sprinter (2006) 21 Proace (2015) 5 Fiorino (2016) 3 NISSAN VOLKSWAGEN Ducato (2017) 6 Talento (2017) 8 NV-200 (2014) 22 Caddy (2015) 12 Doblò (2017) 10 E-NV-200 (2014) 23 Transporter (2015) 13 NV-300 (2017) 8 Crafter (2017) 14 FORD NV-400 (2017) 9

Transit connect (2013) 15 OPEL Transit courier (2014) 16 Transit custom (2012) 17 Vivaro (2014) 8 Transit T2 (2017) 18 Movano (2011) 9

HYUNDAI PEUGEOT

H350 (2015) 24 Bipper (2007) 3 Partner (2017) 4 IVECO Expert (2016) 5 6 Daily (2014) 11 Boxer (2015) PEUGEOT BIPPER FIAT FIORINO CITROËN NEMO

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the door track Distance from the bumper to the cm 71,4 cm 26,9 central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

3 PEUGEOT PARTNER CITROËN BERLINGO

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the door track Distance from the bumper to the cm 72,4 cm 13,9 central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

4 PEUGEOT EXPERT TOYOTA PROACE CITROËN JUMPY

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the door track Distance from the bumper to the cm 101,9 cm 24,4 central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

5 PEUGEOT BOXER CITROËN JUMPER FIAT DUCATO

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the door track Distance from the bumper to the cm 99,4 cm 8,4 central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

6 RENAULT KANGOO

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the door track Distance from the bumper to the cm 75 cm 28 central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

7 For the "Short" version of the van we recommend using additional fixing plates. Reference 89530017. RENAULT TRAFIC FIAT TALENTO OPEL VIVARO NISSAN NV-300

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the door track Distance from the bumper to the cm 84 cm 30 central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

8 RENAULT MASTER NISSAN NV 400 OPEL MOVANO

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the door track Distance from the bumper to the cm 103 cm 20 central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

9 For the "Short" version of the van we recommend using additional fixing plates. Reference 89530017. FIAT DOBLÒ

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the door track Distance from the bumper to the cm 70 cm 10 central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

10 IVECO DAILY

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the door track Distance from the bumper to the cm 110 cm 26 central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

11 VOLKSWAGEN CADDY

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the door track Distance from the bumper to the cm 55,5 cm 39 central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

12 VOLKSWAGEN TRANSPORTER

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the door track Distance from the bumper to the cm 74 cm 30 central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

13 VOLKSWAGEN CRAFTER

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

14 FORD TRANSIT CONNECT

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the door track Distance from the bumper to the cm 86 cm 26 central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

15 FORD TRANSIT COURIER

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the door track Distance from the bumper to the cm 84 cm 25,5 central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

16 FORD TRANSIT CUSTOM

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the door track Distance from the bumper to the cm 98 cm 37 central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

17 FORD TRANSIT T2

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the door track Distance from the bumper to the cm 105 cm 23 central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

18 MERCEDES CITAN

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the door track Distance from the bumper to the cm 75 cm 35,5 central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

19 For the "Short" version of the van we recommend using additional fixing plates. Reference 89530017. MERCEDES VITO

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the door track Distance from the bumper to the cm 87 cm 34 central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

20 MERCEDES SPRINTER

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the door track Distance from the bumper to the cm 106 cm 30 central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

21 NISSAN NV 200

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the door track Distance from the bumper to the cm 93 cm 49 central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

22 NISSAN E-NV-200

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

23 HYUNDAI H350

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the door track Distance from the bumper to the cm 101 cm 25 central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.

24 MAN TGE

INSTALLATION ON THE REAR DOOR INSTALLATION ON THE LATERAL DOOR

! Place the drill template as shown ! Place the drill template as shown in the picture. in the picture. Distance from the door track Distance from the bumper to the cm 131,5 cm 30 central axis of the drill template to the central axis of the drill template

x MEASURE X = FLAT PART OF THE DOOR

x If x < 12 mm ⟶ move the drill template 12-x mm towards the fixed door.

If x ≥ 12 mm ⟶ Follow the standard mounting –refer to the drill template.