K9094NC1-25Th Ann K9-Retail.Indd

Total Page：16

File Type：pdf, Size：1020Kb

In honor of this milestone in firearms history, Kahr is proud to introduce the “25th Anniversary” limited edition K9. Each 25th Anniversary gun starts out as a proven K9 pistol, chambered in 9mm and made entirely in the United States from stainless steel. The guns are then custom engraved with front and rear slide serrations, slide porting, and a commemorative For 25 years, Kahr Firearms has produced the iconic “25 Years” logo. The barrel and trigger are brightly K9®, the compact 9mm pistol that started the revolution polished. The finish is highly durable Sniper Grey ® ® of single-stack 9mm handguns to follow. The K9 remains Cerakote . Hogue aluminum grips are custom unrivaled as the pinnacle of precision engineered, all engraved with aggressive stippling and the new Kahr ® steel, single-stacked, 9mm, compact auto-loaders. Many logo. TruGlo tritium sights add a functional touch, others have imitated the design and concept, but none angled to allow one-handed slide retraction. Each have matched the K9’s reputation for quality, reliability, pistol ships in a plastic case, with three magazines, and accuracy. and a matching custom 1791 leather holster. MODEL: K9094NC1 9 MM 7+1 ROUND Barrel: 3.5”, Polygonal rifling; 1 - 10 RH twist Length O/A: 6.0” Height: 4.5” Slide Width: 0.9” Weight: Pistol 23.1 oz., Magazine 1.9 oz. Sights: TruGlo Night sights Trigger Pull Weight: 7.0 lbs Finish: Sniper Grey Cerakote Frame and Slide, Hogue Aluminum Grips with Custom Engraving 500 Limited Edition Ships with three magazines Limited Lifetime Warranty MSRP: $1,649 ® Kahr Firearms Group partners with Outlaw Ordnance on the design and promotion of custom firearm projects. Outlaw Ordnance is based in West Monroe, Louisiana. A dynamically growing company, Outlaw Ordnance is changing the firearm industry through custom design and innovation. Check out their Instagram Channels to see what else is new. Join us: @kahrfirearms @outlawordnance www.kahr.com.

Copy Link

Recommended publications

Classic Arms (Pty) Ltd Is Proud to Present Its 71St Auction of Collectable, Classic, Sporting & Other Arms, Accoutrements and Edged Weapons
Classic Arms (Pty) Ltd Is proud to present its 71st Auction Of Collectable, Classic, Sporting & Other Arms, Accoutrements and Edged Weapons. ON LINE AUCTION 3OTH JANUARY 2021 AUCTION STARTS AT 09H00 VIEWING BY APPOINTMENT Viewing is Subject To Government Regulations Enquiries: Tel: 013 656 2923 Email: [email protected] CATEGORY A ~ COLLECTABLES Lot Lot Description Estimate A1 .177 [No.1] BSA Air Rifle R 2950.00 Standard Club model, produced 1930-1936. Underlever action. Excellent professionally refinished condition. A2 .177 BSA Airsporter MkV1 Rifle R 2500.00 Produced 1974-1979. Underlever action. Professionally restocked and refinished. Excellent refinished condition. A3 .177 Walther LGR Air Rifle R 4500.00 Target rifle with target peep sight, tunnel fore sight, side-cocking lever, adjustable butt plate, adjustable trigger and stippled grip. Excellent condition. A4 .177 Feinwerkbau L.G Mod 300S Air Rifle R 2500.00 Target rifle with target peep sight, tunnel fore sight, side-cocking lever, adjustable butt plate, adjustable trigger and stippled grip. Excellent condition. A5 .177 Gecado Mod. 50 Air Rifle R 3000.00 Underlever with 3/4 length stock. Tunnel fore sight, adjustable rear sight, scope mounting rail and adjustable trigger. Very good plus condition. A6 4.5mm(.177) Diana Mod 350 Magnum Panther Air Rifle R 5500.00 A powerful air rifle with synthetic stock and hi-viz sights plus provision for mounting a scope. Excellent condition. A7 Deact - .303 "Long Lee" Rifle R 1950.00 Boer war vintage. Rifle has been "circumcised" with shortened fore end. Complete with front & rear volley sights. Action is welded closed.
[Show full text]
August 2011.Pdf
NGPAug11Full 6/23/2011 1:33 PM Page 1 IF YOU DON’T SEE WHAT YOU NEED, ASK US! GERMAN POLICE MAGAZINE POUCH HK 300 .22 LR BARREL CZ 455 BARREL SETS This is an original police-issue We recently acquired These pouch for single stack the last available interchangeable magazines. The black leather inventory of factory HK model 300 rifle barrel sets from CZ USA provide quick pouch is marked Bund 8465- parts. This new 19.7” barrel is in the and easy caliber change capabilities for 12-192-0015 and includes a snap-button white and includes polygonal rifling. the model 455 bolt action rimfire rifle. closure and 2” belt loop. Fits magazines Quantities are limited. Each set features a 20.5” blued steel for Walther P5, P1 & P38, Sig Sauer ITEM#SGN0811-15 $224.95 barrel, 5 round polymer magazine and P220, P225, P226, P228 & P229, S&W assembly/disassembly tools. Barrels are 39/59 and many other similar sized HK SL7 STOCK & HANDGURAD SET hammer forged and include 6-groove magazines. Pouch is in used, fair to good We have a limited rifling with 1/16” twist (.22 caliber) and condition. Quantities are limited. supply of brand new, 1/9” (.17 HMR). The .22 LR Lux barrel set ITEM#SGN0811-10 $7.95 factory walnut stock comes with sights and a magazine spacer, which are not required for the WALTHER P5 BELT HOLSTERS and handguard sets for the SL7 semi-automatic .308 rifle. other sets. These are Hoppner & ITEM#SGN0811-16 $299.95 .22 LR Lux Barrel Set .
[Show full text]
VP9 Operator's Manual
VP9 OPERATOR’S MANUAL 9 mm x 19 SAFETY RULES WARNING: A firearm has the capability of taking your life or the life of someone Please read this operator's manual before handling your firearm. The following safety else! Be extremely careful with your firearm. An accident can occur at anytime and is rules are placed in this manual by HK as an important reminder that firearm safety is your almost always the result of not following basic safety rules. responsibility. Firearms can be dangerous and can potentially cause serious injury, damage to property or death, if handled im prop er ly. 1. Never point a firearm at anyone or in any direction other than a SAFE direction, i.e. down range. 2. Treat all firearms as if they are always loaded. 3. Keep your finger off the trigger and out side of the trigger guard until your sights are aligned on the target and you are ready to fire. VP9 4. Keep your finger off the trigger and outside of the trigger guard while loading or unload ing the firearm. 5. Keep your finger off the trigger and outside of the trigger guard while pulling the firearm out of the holster or while returning it to the holster. Operator’s Manual 6. Be sure of your target and the backstop beyond. 7. Never give a firearm to or take a firearm from anyone unless the action is open and the magazine and/or chamber are free of any ammunition or brass. 8. Be sure that the ammunition you are using is factory loaded, is of the correct caliber for the firearm in which it is to be used, and that it is not damaged in any way.
[Show full text]
Martini-Henry Mark I 1873
Martini-Henry Mark I 1873 The Martini–Henry is a breech-loading single-shot lever-actuated rifle that was used by the British Army. It first entered service in 1871, eventually replacing the Snider–Enfield, a muzzle-loader converted to the cartridge system. Martini–Henry variants were used throughout the British Empire for 47 years. It combined the dropping-block action first developed by Henry O. Peabody (in his Peabody rifle) and improved by the Swiss designer Friedrich von Martini, combined with the polygonal rifling designed by Scotsman Alexander Henry. There were four main marks of the Martini–Henry rifle produced: Mark I (released in June 1871), Mark II, Mark III, and Mark IV. There was also an 1877 carbine version with variations that included a Garrison Artillery Carbine, an Artillery Carbine (Mark I, Mark II, and Mark III), and smaller versions designed as training rifles for military cadets. The Mark IV Martini–Henry rifle ended production in 1889, replaced by the Lee–Metford, but it remained in service throughout the British Empire until the end of the First World War. In the original chambering, the rifles fired a round-nosed, tapered-head .452-inch, soft hollow- based lead bullet, wrapped in a paper patch giving a wider diameter of .460 to .469-inch; it weighed 485 grains. It was crimped in place with two cannelures (grooves on the outside neck of the case), ahead of two fiber card or mill board disks, a concave beeswax wad, another card disk and cotton wool filler. This sat on top of the main powder charge inside initially a rimmed brass foil cartridge, later made in drawn brass.
[Show full text]
Using Forensic Techniques to Further Archeological Inquiry Into Firearms Use
Historic Rifling Data Characteristics: Using Forensic Techniques to Further Archeological Inquiry into Firearms Use Douglas D. Scott Adjunct Research Faculty Applied Anthropology and Geography Program Colorado Mesa University Prepared for National Park Service National Center for Preservation Technology and Training Grant P17AP00228 This report was developed under a grant from the National Center for Preservation Technology and Training, a unit of the National Park Service. Its contents are solely the responsibility of the author and do not necessarily represent the official position or policies of the National Park Service or the National Center for Preservation Technology and Training. September 2019 Table of Contents Executive Summary ...............................................................................................................iii Introduction ............................................................................................................................1 Theoretical and Methodological Background ........................................................................2 A Brief History of Rifling ......................................................................................................4 Data Collection Methods .......................................................................................................12 3D Scanning ................................................................................................................19 Using the Database ................................................................................................................21
[Show full text]
UNIVERSITY of CENTRAL OKLAHOMA Edmond, Oklahoma Jackson College of Graduate Studies
UNIVERSITY OF CENTRAL OKLAHOMA Edmond, Oklahoma Jackson College of Graduate Studies Approaching Objectivity in Firearms Identification: Utilizing IBIS BULLETTRAX-3D’s Sensor Capturing Technology A THESIS SUBMITTED TO THE GRADUATE FACULTY In partial fulfillment of the requirements For the degree of MASTER OF SCIENCE IN FORENSIC SCIENCE By Deion P. Christophe Edmond, Oklahoma 2011 APPROACHING OBJECTIVITY IN FIREARMS IDENTIFICATION: UTILIZING IBIS BULLETTRAX-3D’S SENSOR CAPTURING TECHNOLOGY 2011 Deion P. Christophe Firearm examiners are often asked 1) can a bullet be matched back to the cartridge case from which it was fired? 2) What bullets leave suitable markings for microscopic examinations of this nature? 3) Is there an objective approach for interpreting firearm examiner conclusions derived from microscopic examination? For years, the inability to objectively answer questions of this nature suggests the need for further studies that offer appropriate, reliable conclusions in this discipline. The purpose of this study was to determine the possibility of identifying a bullet back to a cartridge case under both polygonal and conventional firing methods. Additional objectives were to determine which brands of ammunition produced seating marks suitable for comparison purposes, and to determine if a more objective approach for interpreting Firearm examiner identifications exists. A fixed bin analysis consisting of 53 bins in a side by side representation was utilized to analyze specific regions of interest on a single bullet’s bearing surface which was acquired in 1.6mm (band) wide increments by the IBIS BULLETTRAX-3DTM system. Both qualitative and quantitative results provided by this research address concerns that have been outlined by the National Research Council (2009).
[Show full text]
Automated Barrel Inspection and 3D Measurement
Application Note for Defense Industry Automated Barrel Inspection and 3D Measurement with NOVACAMTM Non-Contact 3D Metrology Systems Recent Evolution of Barrel Measurement Requirements The inner surface quality of barrels highly contributes to firearm safety and accuracy. This is why barrel manufacture processes must be controlled through rigorous inspection and measurement of barrel IDs. Until recently, gauging of firearm barrels has been carried out manually with pin gauges, star gauges, ball gauges, and air gauges. Video borescopes have assisted in defect detection. However, data provided by these methods are minimal and not adequate for a thorough evaluation of all ID parameters. To best control the barrel manufacture process, firearm manufacturers increasingly look for more comprehensive and automated barrel ID (inside diameter) measurements. The first reason is the growing need for 3D inspection and quantitative evaluation of a wider range of ID parameters. Secondly, as automation of barrel machining and finishing processes i ncreases, automating inspection is crucial to speeding up and improving quality control of both intermediate and final products . Superior Barrel Measurements with NOVACAMTM 3D Metrology Systems In answer to these needs, NOVACAM non-contact 3D metrology systems increase the range and precision of barrel ID measurements and facilitate automation. As a result, manufacturers improve their process control and product quality, decrease scrap, and increase savings. SYSTEM PARAMETERS for NON-CONTACT BARREL MEASUREMENT • Measured barrel IDs from 1 mm to 155 mm • Micron (micrometer) precision of measurements • Up to 100,000 measurements (3D points) per second • Ability to measure ✓ Rifling parameters - widths and IDs of lands and grooves, flank angles, polygonal rifling measurements, etc.
[Show full text]
Rs Barrels Spread (Page 1)
DAVID TUBB — the RIFLE SHOOTER BARRELS SEGMENT wear in the barrel so my seating depths will, ning on using them in all my competition onal rifling method since, for the same rea- twist rate. I was one of the first contending again, be at a known and proven setting. As rifles for the 2003 season. Polygonal rifling sons mentioned earlier, the bore is allowing shooters (early 1990s) using .243 Winchester explained in the ammunition segment, on a has a different land and groove configuration that much less gas blowby. The question, and here is where I learned that lesson. We brand new chamber my bullets are seated far- which essentially eliminates any right-angle then, is not what you’re not getting with a were first using the (then) new Sierra® 107 ther into the case than what I want. After the edges that come into contact with the bullet. polygon, but what you’re and also some vld-style first 200-300 rounds they are then right The result is less stress and friction on the not losing. Burning less bullets from custom mak- where I want them. All through the year I bullet jacket. Polygonal rifling has less ten- of the same propellant to ers and trying to deter- have been running experiments and noting dency to foul, and since there are no square get the same thing is not mine what was necessary behaviors and zeros, and the majority of that corners for the gas to flow by, may produce a at all bad. I have noticed to stabilize them.
[Show full text]
Deadlands Armory
Rifles Part II. Breech-Loading and Metal Cartridges Breechloaders Since the dawn of black powder, gunmakers have explored ways of loading firearms from the opposite—and significantly closer!—end of the barrel. Hinged breeches, loading gates, and detachable chambers date back to the matchlock period, and even Henry VIII owned a few guns loaded in a manner not unlike a “Trapdoor” Springfield. However, such experimental firearms were prohibitively expensive, and never achieved anything more than novelty status among the wealthy. It was not until the nineteenth century that improvements in engineering techniques and ammunition types made breech-loading firearms a viable alternative to muzzle-loaders. A New Age In the early1860s, breech-loading firearms finally began to supplant muzzle-loaders. While the difference may appear minor—the rifle is loaded from the rear of the barrel, rather than the muzzle—the implications are enormous. Faster to reload, requiring less auxiliary equipment, and easier to clean, breech-loading rifles could achieve significantly higher rates of fire—up to ten rounds a minute in the hands of an experience shooter! They can also be reloaded from a prone or sitting position. The trade-off comes with an increase in complexity, as breech-loaders require some form of mechanical “action” to open the breech, expose the chamber, and reseal the breech. Most breech-loaders are classified by the system used to accomplish this process, which usually involves the movements of the “breechblock,” the metal component which physically seals the breech-end of the barrel and permits the rifle to be fired safely. Merrill Carbine with the breechblock opened, 1858–1861 COPYRIGHT 2018 BY A.
[Show full text]
Chapter 7 Firearms and Tool Marks Edward E
Chapter 7 Firearms and Tool Marks Edward E. Hueske, MA 1. INTRODUCTION The field of firearms identification is typically associated with tool mark identification in the context of two related but different entities. Much of firearms identification entails a specific area of tool mark identification. By definition, a tool mark results from the contact of one surface with another, the harder of which is the “tool.” Thus, in the case of a firearm and a bullet, the firearm (e.g., the interior of the barrel) is the tool that produces tool marks on the surface of the bullet as it moves through the barrel upon discharge of the firearm. Likewise, the examination of firing pin impressions, magazine marks, extractor marks, ejector marks, breech face marks, and chamber marks on fired cartridge cases all constitute tool mark examinations. The fact that firearms identification also involves examinations other than tool marks accounts for the distinction between the two disciplines. The analysis of gunpowder patterns on clothing, the determination of cartridge case ejection patterns, and the measurement of trigger pull or establishing bullet tra- jectory are examples of other examinations. Likewise, weapons function test- ing, shot pellet pattern testing, and serial number restoration are additional non- tool mark comparison aspects of firearms identification. Firearms identification is often referred to as “forensic ballistics” or just “ballistics.” This is actually a misnomer because ballistics is limited to the study of projectile behavior. Ballistics, in the true sense, includes three different aspects: interior ballistics (bullet behavior within the confines of the barrel), exterior ballistics (bullet behavior upon exiting the barrel), and terminal ballistics From: The Forensic Laboratory Handbook: Procedures and Practice Edited by: A.
[Show full text]
Handloader Magazine
El Lobo Custom Rifle Giveaway! WIN THIS RIFLE! See Inside for Details Modern Powders in the .303 British! Kimber Cast Bullet Solo 9mm Designs Micro-Compact! August 2011 No. 273 Rifle Magazine Presents - HANDLOADER $5.99 Cool Colt: 08 Lightning .44 W.C.F. 7 25274 01240 4 Printed in USA $5.99 U.S./Canada August 2011 Volume 46, Number 4 ISSN 0017-7393 AMMUNITION RELOADING JOURNAL Issue No. 273 Page 42 . Page 50 . Page 60 . The .44 and .38 Choosing a Kimber Solo 8 WCFs Are Rifle 28 Bullet for 36 A New 9mm Cartridges Big Game Micro-Compact! Reloader’s Press - From the Hip - Charles E. Petty Dave Scovill Brian Pearce Cast Bullet Designs 42 Roundnose/Flatpoint .225 Winchester The Good Mike Venturino 14 Bullets & Brass - 32 Gun Folks Brian Pearce Mike’s Handloading with Shootin’ 50 Accurate Powders Shack - Frequently Wrong A Complete Yet 20 Mike Venturino but Never in Doubt Evolving Line Pistol Pointers - Brian Pearce Charles E. Petty 34 9.3x57mm Mauser 60 Not Just on Paper 24 Accurate No. 9 Cartridge How Federal keeps Propellant Profiles - Board - a tradition alive. R.H. VanDenburg, Jr. Gil Sengel Terry Wieland 4 Background Photo: © 2011 Vic Schendel Handloader 273 Page 74 On the cover . The compact Kimber Solo Carry is Page 42 chambered in 9mm. Photo by G. Hudson. Page 66 Issue No. 273 August 2011 AMMUNITION RELOADING JOURNAL Publisher/President – Don Polacek Publishing Consultant – Mark Harris Editor in Chief – Dave Scovill Associate Editor – Lee J. Hoots Managing Editor – Roberta Scovill Assisting Editor – Al Miller Senior Art Director – Gerald Hudson Production Director – Becky Pinkley Contributing Editors John Haviland Ron Spomer Brian Pearce Stan Trzoniec Charles E.
[Show full text]
Firearms/Tool Marks Training Manual
Firearms/Tool Marks Training Manual December 2016 Washington State Patrol Crime Laboratory Division Firearms/Toolmarks Training Manual Table of Contents A. ADMINISTRATIVE MATTERS AND PROCEDURES 5 B. BACKGROUND/HISTORY OF FIREARMS IDENTIFICATION AND CURRENT TRENDS 10 C. FIREARMS & AMMUNITION DEVELOPMENT AND CURRENT TRENDS 22 D. MANUFACTURE OF MODERN FIREARMS 27 E. MANUFACTURE OF MODERN AMMUNITION 38 F. INSTRUMENTATION 43 G. EXAMINATION OF FIREARMS 47 H. BULLET EXAMINATIONS AND COMPARISONS 69 I. CARTRIDGE/CARTRIDGE CASE EXAMINATIONS AND COMPARISONS 85 J. SHOTSHELL AND SHOTSHELL COMPONENT EXAMINATIONS AND COMPARISONS 97 K. GUNSHOT RESIDUE EXAMINATIONS AND DISTANCE DETERMINATIONS 108 L. TOOLMARK EXAMINATIONS AND COMPARISONS 121 M. SERIAL NUMBER RESTORATION 143 N. RESEARCH PROJECT, REPORT WRITING, EXPERT TESTIMONY AND EXTERNAL LABORATORY REVIEW AND TOURS 152 FATM Training Manual Page 2 of 256 Revision December 28, 2016 Approved by CLD Quality Manager All Printed Copies Are Uncontrolled Revision 4 Washington State Patrol Crime Laboratory Division Firearms/Toolmarks Training Manual INTRODUCTION The following training manual will allow you as an examiner trainee to guide yourself through the various areas of knowledge integral to the field of firearms/toolmark identification. This manual is generic in its layout and allows some modification by the individual training scientist or technical lead to meet local conditions. It is paramount that you keep before you the primary and ultimate objective of this training period: to independently and competently examine and compare evidence relating to firearms and toolmark identification; to independently and competently render an opinion and reach conclusions relating to your examinations and comparisons; and to give expert testimony in court in matters encompassed within the broad definition of firearms/toolmark identification and to do this in a professional, competent and an impartial manner.
[Show full text]