International Telecommunication Union

Total Page:16

File Type:pdf, Size:1020Kb

International Telecommunication Union ITU, Geneva – September 2003 LIST OF ITU-T RECOMMENDATIONS September 2003 LIST OF ITU-T RECOMMENDATIONS Edition 2003-2 TABLE OF CONTENTS Page Introduction........................................................................................................... 3 Legend .................................................................................................................. 4 List of ITU-T Recommendations in force .............................................................. 5 Mapping of ISO/IEC Standards to ITU-T Recommendations................................ 185 Transferred ITU-R CMTT Recommendations to ITU-T J-Series ........................................................................................................ 189 List of ITU-T Handbooks ....................................................................................... 191 List of ITU-T Software Packages........................................................................... 193 List of ITU-T Test Charts ....................................................................................... 199 Others ITU-T products........................................................................................... 200 Sales and Distribution ........................................................................................... 204 Order Form............................................................................................................ 209 _____________ NOTE For the latest, most up-to-date information please consult the ITU-T website at the following address: www.itu.int/ITU-T/publications ITU publications can be found under: www.itu.int/publications ITU 2003 All rights reserved. No part of this publication may be reproduced, by any means whatsoever, without the prior written permission of ITU. International Telecommunication Union Telephone: + 41 22 730 51 11 Telefax: + 41 22 733 72 56 Place des Nations Telex: 421000 uit ch CH-1211 Geneva 20 Telegram: ITU GENEVE Switzerland E-mail: [email protected] Web: www.itu.int/ ITU-T Telephone: + 41 22 730 58 52 Telecommunication Standardization Bureau Telefax: + 41 22 730 58 53 Place des Nations E-mail: [email protected] Electronic document handling: [email protected] CH-1211 Geneva 20 Web: www.itu.int/itu-t Switzerland International Telecommunication Union Telephone: + 41 22 730 61 41 (English) + 41 22 730 61 42 (Français) Sales and Marketing Division + 41 22 730 61 43 (Español) Place des Nations Telefax: + 41 22 730 51 94 CH-1211 Geneva 20 Telex: 421000 uit ch E-mail: [email protected] Switzerland Web: www.itu.int/publications The bookshop is open at the ITU Headquarters (Tower Building) in Geneva from 8h30 to 12h00 and from 13h30 to 17h00, Monday to Friday. 2 ITU-T 09/03 INTRODUCTION The main purpose of this List is to indicate all the ITU-T (formerly CCITT) Recommendations currently in effect at the date of its publication. In addition, the ITU-T Supplements which contain operational or other practical/implementation type of information related to a particular Series of Recommendations are listed at the end of that Series in the List. Until 1990, (former) CCITT Recommendations were grouped for publication in fascicles of the CCITT Books. Since 1990, CCITT/ITU-T Recommendations have been published as individual booklets. It should be noted that, within established ITU budgets, there is provision for translation of a number of ITU-T Recommendations into Arabic, Chinese and Russian. The choice of which Recommendations are translated is established in collaboration with the principal ITU Member Countries involved. Readers interested in such language versions should get in touch with ITU Sales and Marketing Division at the address provided in this List. New Recommendations which are currently in the process of publication are noted as “To be published”. At the date when a Recommendation is approved, there remain several steps in preparing and printing the texts so the actual publication date for these Recommendations is necessarily different from the approval date. When an electronic version of a recently-approved Recommendation becomes available the text is pre-published and can be downloaded (see the ITU Electronic Bookshop, page 205). Pre-published and superseded ITU-T Recommendations are now also available via the yearly online subscription service and the Electronic Bookshop. When an ITU-T Recommendation is accompanied by addenda (Add.), amendments (Amd.) and/or corrigenda (Cor.), all documents should be purchased in order to have the complete information. All Series A Recommendations and the corrigenda may be downloaded for free from the ITU Website. A few Recommendations include software written specifically to help customers, telecommuni- cations service operators or manufacturers to test equipment, systems or networks. There is a list of available software on page 193. Other Recommendations describe test charts intended to test graphic communication systems. Test charts of special quality with different resolutions may be ordered separately from the ITU Sales Service, since the specimens reproduced in those Recommendations are generally not suited for measurements. The available test charts are listed on page 199. While most of the foregoing applies to printed paper copies of ITU-T Recommendations, the same Recommendations are available electronically through the ITU Electronic Bookshop, the ITU-T Recommendations Online and ITU-T Recommendations on CD-ROM. More detailed information about these products and how to order them is provided at the end of this List. For forthcoming publications, please refer regularly to the Web: www.itu.int/publications. Finally, if you require further information about the operations of the ITU Standardization Sector or the contents of ITU-T Recommendations, please use the address and numbers on page 2. Telecommunication Standardization Bureau ITU-T 09/03 3 LEGEND Approval date Recommendation G.707 (03/96) Network node interface for the Recommendation number synchronous digital hierarchy (SDH) Title NotesPrice in Replaces 1993 versions of ITU-T G.707, G.708, G.709 Swiss francs Number of pages 136pp E 7272 F 7273 S 7274 55 CHF English (E), French (F) and Section Title Coding of analogue signals by pulse code Spanish (S) text modulation article numbers Annex published separately G.723.1 Annex A (11/96) Silence compression scheme This Annex includes 3 diskettes which are common to Recommendation main body and to this annex and which contain test vectors and C reference code for implementation verification of the G.723.1 fixed point dual rate speech coder for multimedia communications. 20pp E 10039 F 10040 S 10041 104 CHF Information on deliverables included when applicable Recommendation published in Common family I.254 Multiparty supplementary services title parts I.254.1 (11/88) Conference calling (CONF) Individually through the Electronic Bookshop: 20 CHF Individual specific title I.254.2 (08/92) Three-Party Supplementary Service 10pp E 2904 F 2902 S 2906 11 CHF G.161 (06/02) Interaction aspects of signal processing network equipment To be published... Recommendation which has been approved but not yet published 4 ITU-T 09/03 List of ITU-T Recommendations in force SERIES A A.7 (06/02) Focus groups: Working methods and Organization of the work of ITU-T procedures Free of charge from the Electronic Bookshop 11pp E 22846 F 22847 S 22848 9 CHF A.1 (10/00) Work Methods for Study Groups of the A.8 (10/00) Alternative approval process for new and ITU Telecommunication Standardization Sector revised Recommendations (ITU-T) Free of charge from the Electronic Bookshop Free of charge from the Electronic Bookshop 17pp E 20214 F 20215 S 20216 12 CHF 17pp E 20202 F 20203 S 20204 12 CHF A.9 (10/00) Provisional working procedures for the Special Study Group on IMT-2000 and Beyond A.2 (10/00) Presentation of contributions relative to the study of Questions assigned to the ITU-T Free of charge from the Electronic Bookshop Free of charge from the Electronic Bookshop 10pp E 20217 F 20218 S 20219 9 CHF 12pp E 20205 F 20206 S 20207 9 CHF A.11 (10/00) Publication of ITU-T Recommendations and WTSA proceedings A.3 (10/96) Withdrawn (10.00) Free of charge from the Electronic Bookshop Elaboration and presentation of texts and development of terminology and other means of 12pp E 20220 F 20221 S 20222 9 CHF expression for Recommendations of the ITU Telecommunication Standardization Sector A.12 (10/00) Identification and layout of ITU-T Recommendations Deleted; an “ITU-T Recommendation author’s guide” is available on ITU-T website Free of charge from the Electronic Bookshop Free of charge from the Electronic Bookshop 10pp E 20223 F 20224 S 20225 9 CHF 16pp E 14771 F 14771 S 14771 12 CHF A.13 (10/00) Supplements to ITU-T Recommendations A.4 (06/02) Communication process between Free of charge from the Electronic Bookshop ITU-T and Forums and Consortia 10pp E 20226 F 20227 S 20228 9 CHF Free of charge from the Electronic Bookshop 12pp E 22840 F 22841 S 22842 9 CHF A.23 Annex A (11/01) Guide to ITU-T and ISO/IEC JTC1 cooperation A.5 (11/01) Generic procedures for including Free of charge from the Electronic Bookshop references to documents of other organizations in 24pp 17 CHF ITU-T Recommendations Free of charge from the Electronic Bookshop A.30 (03/93) Withdrawn (10.00) Major degradation or disruption of service 12pp E 21663 F 21664 S 21665 9 CHF This Recommendation is also included but not published in F series under alias number F.12 A.6 (06/02) Cooperation and exchange of information between
Recommended publications
  • Proposed Work Program As of February 2021
    BUREAU OF PHILIPPINE STANDARDS PROPOSED WORK PROGRAM AS OF FEBRUARY 2021 SUBJECT PROJECT REFERENCE STATUS STAGES OF DEVELOPMENT INTERNATIONAL TECHNICAL COMMITTEE [New/Revision 1. Preparatory CLASSIFICATION FOR (Amd./Cor.)/ 2. Organization Meeting STANDARDS Reconfirmation] 3. Drafting/Deliberation 4. Circulation 5. Finalization 6. Approval 7. Published BUILDING, CONSTRUCTION, MECHANICAL AND TRASPORTATION PRODUCTS BPS/TC 5 Concrete, Reinforced Concrete and Standard Specification for Grout for Masonry DPNS ASTM C476:2021 New Circulation 91.100.30 Prestressed Concrete BPS/TC 5 Concrete, Reinforced Concrete and Standard Specification for Mortar for Unit Masonry DPNS ASTM C270:2021 New Circulation 91.100.30 Prestressed Concrete Standard Test Method for Flexural Strength of Concrete BPS/TC 5 Concrete, Reinforced Concrete and DPNS ASTM C78 / C78M:2021 New Circulation 91.100.30 (Using Simple Beam with Third-Point Loading) Prestressed Concrete BPS/TC 5 Concrete, Reinforced Concrete and Terminology Relating to Concrete and Concrete Aggregates DPNS ASTM C125:2021 Revision Circulation 91.100.30 Prestressed Concrete BPS/TC 5 Concrete, Reinforced Concrete and Practice for Capping Cylindrical Concrete Specimens DPNS ASTM C617/C617M:2021 New Circulation 91.100.30 Prestressed Concrete Practice for Preparing Precision and Bias Statements for BPS/TC 5 Concrete, Reinforced Concrete and DPNS ASTM C670:2021 New Circulation 91.100.30 Test Methods for Construction Materials Prestressed Concrete Practice for Agencies Testing Concrete and Concrete BPS/TC 5 Concrete,
    [Show full text]
  • Isofocus #142
    #142 focusYour gateway to International Standards Innovation GENERATION 16 : ESA Photo ISOfocus September-October 2020 – ISSN 2226-1095 ISOfocus, the magazine of the International Organization for Standardization, is published six times a year. You can discover more content on our Website at iso.org/isofocus, or by staying connected with us on : TWITTER FACEBOOK YoutubeFlickrlinkedin Head of Communication | Vanessa Von der Mühll Editor-in-Chief | Elizabeth Gasiorowski-Denis 30 Writers | Ann Brady, Barnaby Lewis, Kath Lockett, Clare Naden, Roxanne Oclarino Copy editor and Proofreader | Vivienne Rojas Designers | Xela Damond, Pierre Granier, Alexane Rosa Translation team | Leïla Esteban, Alexandra Florent Subscriptions and back issues If you enjoy ISOfocus, you can download the pdf for free or subscribe to receive printed issues through our Website iso.org/isofocus. You can also contact our customer service at [email protected]. Contributions You can participate in creating this magazine. If you think your contribution can add value to any of our sections, please get in touch at [email protected]. Views expressed are those of the respective contributors and are not necessarily 38 those of ISO or any of its members. © ISO 2020 Published in Switzerland. All rights reserved. Articles in this magazine may be reproduced for non-commercial purposes only. These may not be modified and must be properly referenced, with due credit to ISO being given. ISO may revoke this permission at its sole discretion. For enquiries, please contact [email protected]. This magazine is printed on certified FSC ® paper. 46 #142 4 ISOfocusSeptember-October 2020 2-3 Innovating for a better future Comment by Sergio Mujica.
    [Show full text]
  • Liderazgo Biomimético Para Las Organizaciones Del Siglo XXI
    UNIVERSITAT POLITÈCNICA DE CATALUNYA (UPC) PROGRAMA DOCTORAL EN ADMINISTRACIÓN Y DIRECCIÓN DE EMPRESAS DEPARTAMENTO DE ORGANIZACIÓN DE EMPRESAS Tesis presentada para obtener el título de Doctora: Liderazgo biomimético para las organizaciones del siglo XXI Barcelona, julio 2020 Doctoranda: Edita Olaizola Director: Co-Director: Dr. Marcos Eguiguren Huerta Dr. Rafael Morales Sánchez Universitat Politècnica de Catalunya, Barcelona Universidad Pablo de Olavide, Sevilla Liderazgo biomimético para las organizaciones del siglo XXI Edita Olaizola ADVERTIMENT La consulta d’aquesta tesi queda condicionada a l’acceptació de les següents condicions d'ús: La difusió d’aquesta tesi per mitjà del repositori institucional UPCommons (http://upcommons.upc.edu/tesis) i el repositori cooperatiu TDX ( h t t p : / / w w w . t d x . c a t / ) ha estat autoritzada pels titulars dels drets de propietat intel·lectual únicament per a usos privats emmarcats en activitats d’investigació i docència. No s’autoritza la seva reproducció amb finalitats de lucre ni la seva difusió i posada a disposició des d’un lloc aliè al servei UPCommons o TDX. No s’autoritza la presentació del seu contingut en una finestra o marc aliè a UPCommons (framing). Aquesta reserva de drets afecta tant al resum de presentació de la tesi com als seus continguts. En la utilització o cita de parts de la tesi és obligat indicar el nom de la persona autora. ADVERTENCIA La consulta de esta tesis queda condicionada a la aceptación de las siguientes condiciones de uso: La difusión de esta tesis por medio del repositorio institucional UPCommons (http://upcommons.upc.edu/tesis) y el repositorio cooperativo TDR (http://www.tdx.cat/?locale- attribute=es) ha sido autorizada por los titulares de los derechos de propiedad intelectual únicamente para usos privados enmarcados en actividades de investigación y docencia.
    [Show full text]
  • HZN Oglasnik Za Normativne Dokumente 2/2021
    Hrvatski zavod za norme Oglasnik za normativne dokumente 2/2021 28. YHOMDþH 2021. Oglasnik za normativne dokumente Hrvatskog zavoda za norme sadrži popise hrvatskih norma, nacrta hrvatskih norma, prijedloga za prihvaćanje stranih norma u izvorniku, povučene hrvatske norme, povučene nacrte hrvatskih norma te ispravke, rezultate europske i međunarodne normizacije i obavijesti HZN-a. Tko u popisima normativnih dokumenata koji su objavljeni u ovom Oglasniku otkrije koju grešku, koja može voditi do krive primjene, moli se da o tome neodložno obavijesti Hrvatski zavod za norme, kako bi se mogli otkloniti uočeni propusti. Izdavač: Sadržaj: 1 Rezultati hrvatske normizacije .................................................................................................. A3 1.1 Hrvatske norme ....................................................................................................................................... A3 1.2 Nacrti hrvatskih norma ............................................................................................................................ 1.3 Prijedlozi za prihvaćanje stranih norma u izvorniku ................................................................................ A9 1.4 Povučene hrvatske norme ...................................................................................................................... A14 1.5 Povučeni nacrti hrvatskih norma ............................................................................................................. 1.6 Ispravci hrvatskih norma ........................................................................................................................
    [Show full text]
  • HZN Oglasnik Za Normativne Dokumente 3/2021
    Hrvatski zavod za norme Oglasnik za normativne dokumente 3/2021 31. RåXMND 2021. Oglasnik za normativne dokumente Hrvatskog zavoda za norme sadrži popise hrvatskih norma, nacrta hrvatskih norma, prijedloga za prihvaćanje stranih norma u izvorniku, povučene hrvatske norme, povučene nacrte hrvatskih norma te ispravke, rezultate europske i međunarodne normizacije i obavijesti HZN-a. Tko u popisima normativnih dokumenata koji su objavljeni u ovom Oglasniku otkrije koju grešku, koja može voditi do krive primjene, moli se da o tome neodložno obavijesti Hrvatski zavod za norme, kako bi se mogli otkloniti uočeni propusti. Izdavač: Sadržaj: 1 Rezultati hrvatske normizacije .................................................................................................. A3 1.1 Hrvatske norme ....................................................................................................................................... A3 1.2 Nacrti hrvatskih norma ............................................................................................................................ 1.3 Prijedlozi za prihvaćanje stranih norma u izvorniku ................................................................................ A10 1.4 Povučene hrvatske norme ...................................................................................................................... A15 1.5 Povučeni nacrti hrvatskih norma ............................................................................................................. 1.6 Ispravci hrvatskih norma ........................................................................................................................
    [Show full text]
  • Business Resilience Standards Helping Businesses Address COVID-19 Related Economic Challenges
    INTERNATIONAL COOPERATION SEE QI Fund © istockphoto Business Resilience Standards Helping Businesses Address COVID-19 Related Economic Challenges Table of Contents About this Publication Introduction ..................................................................................................................................... 7 About the Authors........................................................................................................................... 8 Driton S. Bejtullahu..................................................................................................................... 8 Violeta Haxhillazi ........................................................................................................................ 8 Osman-Jablan Bulić ................................................................................................................... 9 Suzana Temelkoska ................................................................................................................... 9 Liridona Cani ............................................................................................................................ 10 Antigona Limani........................................................................................................................ 10 Chapter 1: Risk Management (Driton S. Bejtullahu) 1. Introduction ........................................................................................................................... 12 2. Complexity – a Reason for Increased Risks in Industry
    [Show full text]
  • Responding to the Covid-19 Crisis Pathway to Business Continuity & Recovery
    RESPONDING TO THE COVID-19 CRISIS PATHWAY TO BUSINESS CONTINUITY & RECOVERY Guidance for Micro, Small and Medium Enterprises (MSMEs) INCLUSIVE AND SUSTAINABLE INDUSTRIAL DEVELOPMENT RESPONDING TO THE COVID-19 CRISIS PATHWAY TO BUSINESS CONTINUITY & RECOVERY Guidance for Micro, Small and Medium Enterprises (MSMEs) Vienna, Austria June 2020 www.unido.org DISCLAIMER This document has been produced without formal United Nations editing. The designations employed and the presentation of the material in this document do not imply the opinion of the Secretariat of the United Nations Industrial Development Organization (UNIDO) whatsoever concerning: the legal status of any country, territory, city or area or its authorities; the delimitation of its frontiers or boundaries; its economic system or degree of development. Designations such as “developed”, “industrialized” and “developing” are intended for statistical convenience and do not necessarily express a judgment about the stage reached by a particular country or area in the development process. The mention of firm names or commercial products does not constitute an endorsement by UNIDO. The opinions, figures and estimates set forth are the responsibility of the authors and therefore should not be considered as reflecting the views or carrying the endorsement of UNIDO. COMMENTS Comments and questions on issues raised in this report are welcome and may be addressed to [email protected] Copyright © by the United Nations Industrial Development Organization, 2020. © 2020 UNIDO - All rights reserved Images: © 2020 - www.unido.org, www.adobestock.com Layout: © 2020 - www.excelcis.com ACKNOWLEDGMENTS ACKNOWLEDGMENTS This document was prepared by the Department of This version has benefited from the valuable comments Digitalization, Technology and Innovation of the United provided by Ms.
    [Show full text]
  • 1 Iso/Iec 21118:2020 2 Iso/Iec 21471:2020 3 Iso
    Nr. Standard reference Title Information technology — Office equipment — Information to be 1 ISO/IEC 21118:2020 included in specification sheets for data projectors Information technology — Automatic identification and data capture 2 ISO/IEC 21471:2020 techniques — Extended rectangular data matrix (DMRE) bar code symbology specification Information technology — Cloud computing — Taxonomy based data 3 ISO/IEC 22624:2020 handling for cloud services Rolling bearings — Needle roller bearing track rollers — Boundary 4 ISO 7063:2018 dimensions, geometrical product specifications (GPS) and tolerance values Steel and cast iron — Determination of silicon content — Gravimetric 5 ISO 439:2020 method Steel — Determination of vanadium content — Flame atomic absorption 6 ISO 9647:2020 spectrometric method (FAAS) 7 ISO 21895:2020 Categorization and classification of civil unmanned aircraft systems Fire detection and fire alarm systems — Part 17: Transmission path 8 ISO 7240-17:2020 isolators Road vehicles — Unified diagnostic services (UDS) — Part 1: 9 ISO 14229-1:2020 Application layer Road vehicles — Clock extension peripheral interface (CXPI) — Part 2: 10 ISO 20794-2:2020 Application layer Road vehicles — Clock extension peripheral interface (CXPI) — Part 3: 11 ISO 20794-3:2020 Transport and network layer Road vehicles — Clock extension peripheral interface (CXPI) — Part 4: 12 ISO 20794-4:2020 Data link layer and physical layer Cinematography — Time and control code for 24, 25 and 30 frames per 13 ISO 9642:2020 second motion-picture film systems —
    [Show full text]
  • ASTM S.P.A. Around the Sense of Environmental, Technological and Social Responsibility That Guides Our Behaviour
    SUSTAINABILITY REPORT CONSOLIDATED NON-FINANCIAL STATEMENT PURSUANT TO LEGISLATIVE DECREE 254/2016 2019 2 THE SUSTAINABILITY REPORT HAS BEEN TRANSLATED INTO ENGLISH SOLELY FOR THE CONVENIENCE OF THE INTERNATIONAL READER. IN THE EVENT OF CONFLICT OR INCONSISTENCY BETWEEN THE TERMS USED IN THE ITALIAN VERSION OF THE DOCUMENT AND THE ENGLISH VERSION, THE ITALIAN VERSION SHALL PREVAIL, AS THE ITALIAN VERSION CONSTITUTES THE OFFICIAL RECORD 2019 Sustainability Report 1 CONTENTS 2 Letter to Stakeholders 4 Methodological note 01 THE ASTM GROUP 05 OUR BUSINESS SEGMENTS AND SUSTAINABILITY 10 Corporate ownership 108 Motorway concessions 12 Business 126 EPC 13 Group structure and business segments 133 Technology 14 2019 highlights 15 Vision and values 16 Sustainability for the Group 18 Corporate Governance 20 Internal Audit and Risk Management System 22 Main risks concerning sustainability issues 06 FOCUS 33 Ethics and integrity 37 Stakeholder map and materiality analysis 138 EcoRodovias 02 OUR ECONOMIC RESPONSIBILITY 47 Economic value generated and distributed 07 ANNEXES 48 Impact measurement 50 Supply chain 142 Table of the boundary of material topics for the ASTM Group 144 GRI Content Index 03 OUR RESPONSIBILITY TOWARDS PEOPLE 57 People 65 Diversity and inclusion 08 70 Remuneration and benefits INDEPENDENT 74 Human capital development AUDITOR’S REPORT 78 Health and safety 152 Independent Auditor’s Report 04 OUR RESPONSIBILITY TOWARDS THE ENVIRONMENT AND LOCAL AREAS 87 Environmental issues management 88 Use of resources 94 Waste 96 Noise management 97 Protection of the local area, reduction in land use and protection of biodiversity 103 Donations and sponsorships 2 LETTER TO STAKEHOLDERS Our business segments are spread across various countries with different cultures, but the objectives that guide us are the same and shared by all.
    [Show full text]
  • Improving the Firm Innovation Capacity Through The
    e-ISSN: 2318-9975 Received: 30 Jan. 2021 - Approved: 05 July 2021 Evaluation Process: Double Blind Review https://doi.org/10.5585/iji.v9i2.19273 IMPROVING THE FIRM INNOVATION CAPACITY THROUGH THE ADOPTION OF STANDARDIZED INNOVATION MANAGEMENT SYSTEMS: A COMPARATIVE ANALYSIS OF THE ISO 56002:2019 WITH THE LITERATURE ON FIRM INNOVATION CAPACITY O APRIMORAMENTO DA CAPACIDADE DE INOVAÇÃO PELA ADOÇÃO DE SISTEMAS DE GESTÃO DE INOVAÇÃO PADRONIZADOS: UMA ANÁLISE COMPARATIVA DA ISO 56002:2019 COM A LITERATURA SOBRE CAPACIDADE DE INOVAÇÃO MEJORA DE LA CAPACIDAD DE INNOVACIÓN MEDIANTE LA ADOPCIÓN DE SISTEMAS ESTANDARIZADOS DE GESTIÓN DE LA INNOVACIÓN: UN ANÁLISIS COMPARATIVO DE LA ISO 56002:2019 CON LA LITERATURA SOBRE CAPACIDAD DE INNOVACIÓN Silvio Bitencourt da Silva1 Cite as – American Psychological Association (APA) Silva, S. B. (2021, May/Aug.). Improving the firm innovation capacity through the adoption of standardized innovation management systems: a comparative analysis of the ISO 56002:2019 with the literature on firm innovation capacity. International Journal of Innovation - IJI, São Paulo, 9(2), 389-413. https://doi.org/10.5585/iji.v9i2.19273. Abstract Objective of the study: Investigate how firm innovation capacity can be improved by adopting ISO 56002: 2019. Methodology/approach: The methodology adopted is a comparative analysis of the ISO 56002: 2019 with the literature on firm innovation capacity. The methods employed in the study included a review of the literature on the dynamic capabilities and firm innovation capacity, and qualitative documentary research that consisted of three phases: pre-analysis, organization of documents, and the analysis of results, using information from the texts of the guidelines and processes indicated by ISO 56002: 2019, which additionally involved the ISO 56000 family of standards.
    [Show full text]
  • Annual Report 2019 "Journey to a New Strategy"
    annual report 2019 Journeyto a new strategy 2019 ANNUAL REPORT 2 MESSAGE FROM THE ISO SECRETARY-GENERAL 4 OUR PERFORMANCE 8 OUR HIGHLIGHTS 24 ISO WEEK IN CAPE TOWN 30 OUR MEMBERSHIP 36 OUR PARTNERSHIPS 42 OUR INITIATIVES 56 OUR OFFICERS 60 OUR FINANCES 64 MESSAGE FROM THE ISO PRESIDENT ISO Annual Report 2019 | 1 MESSAGE FROM THE ISO SECRETARY-GENERAL – SERGIO MUJICA A NEW STRATEGY DEFINING AN AMBITIOUS DESTINATION 2019 was a very important year for ISO, one in which our organization prepared itself for the next major step in its journey. At the same time, as we looked at ways to meet future challenges, we didn’t slacken the pace for a minute. The overall picture of 2019 is one of an organization that is delivering like never before, all the while managing an important transition toward our next strategy. This year’s report aims to give a clear idea of the direction in which we are heading, why we have chosen that route, and how we are going to get there. At the same time, I would like to take you through some of the year’s achievements of which I am most proud. In 2019, we continued to meet, and even surpass, expectations. For example, we published 1 638 documents, a greater number than in any other year. These included standards like ISO/IEC 27701 that will play a significant role in addressing threats to online privacy, standards to enable sustainable, integrated urbanization through Building Information Modelling, and ISO 56002, the new standard for innovation management.
    [Show full text]
  • UNIVAC 1100 Series
    70C-877-11 w Computers UNIVAC 1100 Series ~ NINE THOUSAND REMOTE (NTR) 9000 INTERFACE: of strings, character-valued functions, and a string function Enables a UNIVAC 9200/9300, 90/30, or 90/40 computer that permits character variables tG be extracted from or system equipped with a Data Communications Subsystem assigned tG substrings of character variables. ASCD (DCS) or Communications Adapter to opera.e as a remote FORTRAN provides the double-precision complex data batch terminal to an 1100 Series host processor through type, in which complex numbers are represented inte.rna1ly full-duplex communications lines. Fieldata, ASCII, and as a pair of double-precision floating-point numbers. This EBCDIC codes can be handled. NTR supports 9000 Series data type supports a precision of approximately 17 systems configured with the 0711 and 0716 card readers, significant decimal digits and an exponent range of 10-308 0603 and 0604 card punches, the bar printer and the 0768-00, to 10308 for both real and imaginary components of a 0768-02, 0768-99, and 0770 printers, a CalComp plotter, complex number. ASCD FORTRAN also expands the use and paper tape reader/punches. Provisions are available of expressions by permitting expressions to be used in for .off-line operation of the 9000 Series computer and for positions that previously (in· FORTRAN V only) allowed diagnostic services for the 9000 Series peripherals. The simple variables or array elements. software supports console-to-console communications be­ tween the 1100 Series host processor and the remote 9000 ASCII FORTRAN is a four-pass, re-entrant, common­ Series system and handles message compression to enhance banked compiler that provides for extensive optimization, communications line efficiency.
    [Show full text]