The Coop Harvard

Home , Vestibule (architecture)

THE COOP HARVARD

CAMBRIDGE, MA 10 SEPTEMBER 2020

PREPARED FOR:

CAMBRIDGE HISTORIC COMMISSION

HEARING - 10/1/2020

THE COOP HARVARD / EXTERIOR IMPROVEMENTS 10 SEPTEMBER 2020 EXTERIOR

EXISTING MASS AVE ENTRANCE

THE COOP HARVARD / EXTERIOR IMPROVEMENTS 10 SEPTEMBER 2020 EXTERIOR

MASS AVE ENTRANCE

THE COOP HARVARD / EXTERIOR IMPROVEMENTS 10 SEPTEMBER 2020 ENCLOSED VESTIBULE

EXISTING ENTRY LEVEL PERSPECTIVE PROPOSED ENTRY LEVEL PERSPECTIVE

THE COOP HARVARD / EXTERIOR IMPROVEMENTS 10 SEPTEMBER 2020 LEVEL ONE ENTRY

THE COOP HARVARD / EXTERIOR IMPROVEMENTS 10 SEPTEMBER 2020 CLIENT: 3 D C 2 B A 1 PR1.1 2 PR1.1 © Copyright Arrowstreet Inc. © Copyright Address

ARCHITECT:

CONSULTANTS:

PROJECT INFORMATION: LEVEL 1 LEVEL 1 33' - 6" 33' - 6" HARVARD COOP EXISTING ENLARGED CROSS SECTION AT PORTICO 3 3/8" = 1'-0" BOOKSTORE

2 RENOVATIONSISSUANCE: EXISTING ENLARGED SECTION - PORTICO D C PR1.1 B A 2 3/8" = 1'-0" CAMBRIDGE +/- 33.36 V.I.F. +/- 33.33 V.I.F. +/- 33.32 V.I.F PERMIT & EL. EL. EL. HISTORIC 1 CONSTRUCTIONCOMMISSION DOCUMENTS

EX107 STAMP:

3 PR1.1

REVISIONS:

No. Date Description +/- 33.42

33.5 V.I.F. 1/4" / 1'-0" / 1/4" - +/

+/- 36.25 V.I.F. EL.

KEY PLAN

DRAWING TITLE:

EXISTING PLANS

UP & SECTION

Project No. 19055 Drawn By Author Date 08/21/202009/10/2020 NOTE: Scale 3/8" = 1'-0" INDICATE FLOOR TRANSITION DRAWING NUMBER: ROTATED ENLARGED PLAN - PORTICO Copy 1 1 3/8" = 1'-0" PR1.1 9/10/2020 12:58:59 PM CLIENT: 2 TYP. SPRINKLER HEAD LOCATION AT 2 VESTIBULE. REFER TO FP DRAWING 1 5 A4.01 D C B A SERIES A4.01

LEVEL 3 LEVEL 3 54' - 11" 54' - 11"

ARCHITECT:

3 CLEAN FIXTURE(S), A5.01 REFURBISH & REWIRE FOR MECHANICAL UNIT, ON LED LAMPS GYP. KNEE WALL WITH DECORATIVE GYP. KNEE WALL WITH DECORATIVE SLEEPERS. REFER TO MECHANICAL UNIT, BRONZE GRILLE, TO CONCEAL BRONZE GRILLE, TO CONCEAL HVAC DWGS.PROVIDE CLEAN FIXTURE, DECORATIVE BRONZE GRILLE, ON SLEEPERS. MECHANICAL SYSTEM MECHANICAL SYSTEM UNISTRUT TO SUPPORT REFURBISH & REWIRE REFER TO MECHANICAL GYP. KNEE WALL REFER TO HVAC UNIT.

" FOR LED LAMPS

DWGS. PROVIDE

DWGS., TYP AT PORTICO 5

' 1E -

' UNISTRUT TO 1 SUPPORT UNIT. 1 PLINKINGTON GLAZING SYSTEM

7 EXISTING GRILLE TO REMAIN. 2 ALTERNATE RATED ACCESS A5.01 ACCESS PANEL CONSULTANTS: REMOVE ABANDONED HEATING PANEL GRILLE ASSOCIATED WITH ABANDONED HEATING SYSTEM (CONFIRM NOT HISTORIC) INFILL WITH WOOD PANELING WITH SAME SPECIES, SIMILAR GRAIN AND SAME DIMENSION AND PROFILE. EXISTING VITRINE EXISTING VITRINE EXISTING VITRINE (BEYOND) TO REMAIN TO REMAIN TO REMAIN

1 A5.01

LEVEL 1 LEVEL 1 33' - 6" 33' - 6" PROJECT INFORMATION:

3' - 10 1/4" 5' - 11 5/16" 7' - 2" 5' - 11 5/8" HARVARD BOLLARD FOR AUTOMATIC STOCK C TOUCHLESS ENTRY L CL STOCK CL ROOM CL PROVIDE FIREPROOFING FOR NEW 7' - 4 3/4" ROOM 6' - 6 3/4" COOP STRUCTURAL BEAM AND ASSESS CONDITION 006 V.I.F. C L C V.I.F. OF EXISTING BEAM WHERE WORK IS L CONDUCTED. REFER TO STRUCTURAL DWGS. PROVIDE FIREPROOFING FOR NEW STRUCTURAL BEAM ENLARGED SECTION - PORTICO AND ASSESS CONDITION OF EXISTING BEAM WHERE WORK BOOKSTORE IS CONDUCTED. REFER TO STRUCTURAL DWGS. 5 3/8" = 1'-0" ENLARGED CROSS SECTION AT PORTICO 2 3/8" = 1'-0" RENOVATIONSISSUANCE: BOLLARD WITH TOUCHLESS ENTRY VIA INGROUND DOOR AUTO D C 5 OPERATOR FOR WAVE SENSOR. PROVIDE STAINLESS STEEL B A A4.01 BASEPLATE. COORDINATE W/ ELECTRICAL FOR WIRING, TYP. AT ALL ENTRY POINTS CL CL CL CAMBRIDGE 4' - 7 7/8" 6' - 10" 10' - 4 1/2" PERMIT & V.I.F. +/- 33.36 V.I.F. +/- 33.33 V.I.F. +/- 33.32 V.I.F HISTORIC EL. EL. EL. CONSTRUCTIONCOMMISSION 1 DOCUMENTS REFURBISH LIGHT FIXTURE AND REWIRE FOR LED LAMPS STAMP: EX107 105A 105B 105C BOLLARD W/ AUTO DOOR OPERATOR 5 6 5/8" A5.01 R N 5' - 4 3/4" CL CL O O F TI C C C PLINKINGTON PLANAR GLAZING T C L L L SYSTEM O U EXTENT OF REMOVED N R DOOR AND SOLID PANEL NEW STRUCTURALLY T EXIT GLAZED WALL AND PLINKINGTON GLAZED FIN, TYP. S DOOR SYSTEM. A4.01 DISPLAY N REMOVE OUTLET AND CORRIDOR O SWITCH REPLACE PANEL 112 C TO MATCH EXISTING 107 3 DIMENSION AND PROFILE BUILD NEW CUSTOM DOORS AT ENTRY TO MATCH EXISTING; USE WOOD LOCATION OF NEW PROVIDE NEW TERRAZZO FLOORING, PROTECT, ANNUNCIATOR PANEL SPECIES WITH SIMILAR CLEAN AND REPAIR EXISTING MARBLE REVISIONS: GRAIN AND MATCH SAME BASE (REFER TO ID-SERIES) LAYOUT, DIMENSIONS AND ASSESS CONDITION OF EXISTING 2 PROFILES. No. Date Description HISTORIC PANELS ON BOTH SIDES A4.01 PORTICO AFTER REMOVAL OF VESTIBULE WALLS AND CEILING. IF POSSIBLE, 105 KEEP EXISTING PANELS AND +/- 33.42 REFINISH TO MATCH SURROUNDING FOLLOWING RELOCATION AREA. IF NOT SALVAGEABLE, OF FIRE ALARM PANEL, REPLACE WITH SAME WOOD SPECIES REMOVE EXISTING PANEL WITH SIMILAR GRAIN AND IN SAME AND REPLACE WITH SAME DIMENSION AND PROFILE.

WOOD SPECIES WITH 33.5 V.I.F.

SIMILAR GRAINING IN 1'-0" / 1/4" LEVEL 1 112 SAME DIMENSION AND 33' - 6" - PROFILE +/ 1E EXTEND VITRINE PROVIDE BOLLARD W/ AUTO FLOOR INTO EXISTING OPERATOR FOR PAIR DOOR +/- 36.25 V.I.F. RECESS. PROVIDE A EL. ± 4' - 5 7/8" PLATFORM ALIGNED +/- 36.25 V.I.F. WITH TOP OF ELEVATION AT INTERIOR VESTIBULE V.I.F. EL. SURROUNDING 4 3/8" = 1'-0" 19' - 1 15/16" VITRINE SUBFLOOR. PATCH

" FINISH TO MATCH

8 VITRINE (SOUTH) /

EXISTING MATERIALS.

. (NORTH) -

106 ±

" 2

6 COORDINATE THRESHOLD

- 33.5

' W/ ID-SERIES SHEETS MAINTAIN CONSISTENT HEADER 1" THICK GLASS 5 DATUM. STEP ALUMINUM U-CHANNEL REFER TO SPEC FOR GLASS SPECIFICATION TO ACCOMMODATE FLOOR SLOPES

REPLACE RECESSED WALK- OFF CARPET, V.I.F EXTENT SOUTH STAIR

" KEY PLAN

' NORTH SEE SPECIFICATION

4 103 1 STAIR ALTERNATE LIST DRAWING TITLE: FOR SCOPE ALTS 104 AT VESTIBULE. 2

" A7.01

1 ENLARGED

9 PROVIDE NEW TERRAZZO PORTICO PLANS FLOORING TO EXTENT SHOWN UP AND METAL TRANSITION STRIPS & ELEVATIONS WHERE DISSIMILAR FLOORING 6 STAGGER ALUMINUM RAILS AT BASE ABUTS A7.01 TO SUITE SLOPE AT GRADE .

I DN

A4.01 Project No. 19055 4 LEVEL 1 A5.01 33' - 6" Drawn By VW 4 Date 08/21/202009/10/2020 1' - 0 3/8" Scale 3/8" = 1'-0" 2' - 10 1/2" 2' - 0 1/2" 2' - 0" 2' - 10 1/2" 2' - 3 1/2" 1' - 10" 2' - 10 1/2" 1' - 3 1/8" NOTE: 5' - 11 3/8" 7' - 2" 5' - 11 5/8" DRAWING NUMBER:

A8.01 INDICATE FLOOR TRANSITION CL CL CL CL

ELEVATION AT GLAZING ENCLOSURE ROTATED ENLARGED PLAN - PORTICO 3 3 3/8" = 1'-0" 1 3/8" = 1'-0" A4.01 9/10/2020 4:26:06 PM CLIENT:

HISTORIC DESIGN ASSIST SCOPE

HISTORIC CONTRACTOR TO PROVIDE DESIGN ASSIST INCLUDING THE FOLLOWING ITEMS. REFER TO WRITTEN SPECIFICATION FOR GENERAL PERFORMANCE REQUIREMENTS. © Copyright Arrowstreet© Inc. Copyright BARNES & NOBLE COLLEGE 1. CLEAN MASSACHUSETTS AVE BRASS DISPLAY WINDOW 66 CEDAR STREET, 2. CLEAN BRONZE VITRINES 3. REFURBISH PAIR WOOD DOOR INTO ENTRY VESTIBULE. NEWINGTON, CT 06111 4. CLEAN / REFURBISH CIRCULAR BRONZE WINDOW AND BRONZE MOLDINGS ABOVE PAIR WOOD DOORS INTO ENTRY VESTIBULE. 5. REFURBISH NORTH STAIR EGRESS CORRDIOR DOOR TO EXTERIOR; INCLUDING PROVIDING NEW CONTINUOUS HINGE AND NEW HARDWARE, REFURBISH BRONZE SIGN HOLDER. 6. MODERNIZE LIGHT FIXTURES AT PORTICO AND ENTRY VESTIBULE. DETERMINE IF NEW SOCKETS, REWIRING AND NEW LAMPS ARE NEEDED. 7. AT REPLACEMENT WINDOWS, PROVIDE NEW CAULKING. 8. PAINT WOOD WINDOW CASINGS AT MASSACHUSETTS AVE AND PALMER STREET ARCHITECT: 9. CLEAN MASSACHUSETTS AVE CLOCK FACE AND PAINT CLOCK HANDS. REVIEW ADDING LIGHITNG TO CLOCK. 10. AT MASSACHUSETTS AVE ENGRAVED LIMESTONE LETTERING, BLACK METAL FLASHING IS STAINING PAINTED LIMESTONE. DETERMINE IF FLASHING IS FAILING & NEEDS REPAIR OR PAINT LIMESTONE. CLEAN LIMESTONE LETTERING, CORNICE, PEDIMENT ETC. 11. PROVIDE BIRD DETERRENT AT MASSACHUSETTS AVE PEDIMENT LEDGE AND CLOCK. 12. AT PARAPET CAPSTONE, DETERMINE CAUSE OF SPALLING AND REPAIR. 13. CLEAN/RESTORE INTERIOR TRAVERTINE FLOOR.

NOTE: REFER TO SPEC FOR ALL GLASS DOOR HARDWARE 1/2" GLASS DOOR METAL CHANNEL SCRIBED TO PILASTER BASE, CAPITAL AND SHAFT. DOOR RAIL FINISH TO MATCH ALUMINUM GLAZING CONSULTANTS: CHANNEL IN-GROUND DOOR OPERATOR ALUMINIUM GLAZING CHANNEL

TERRAZZO FLOORING SEALANT AND BACKER ROD STRUCT. GLASS ENCLOSURE, AS REQUIRED REFER TO SPEC.

STAINLESS STEEL ANGLE EXISTING SLAB W/ SPACER, TYP. PROJECT INFORMATION: EXISTING I BEAM HARVARD 1/2" THICK PLATE REFER TO STRUCT. DWG.

NEW BEAM COOP REFER TO STRCT. DWG

NEW STRUCT. PLATE REFER TO STRUCT. DWG BOOKSTORE FOR DETAILS

RENOVATIONSISSUANCE: SECTION DETAIL - INGROUND DOOR OPERATOR SECTION DETAIL AT HEAD CONNECTION OF GLASS FIN 7 1 1/2" = 1'-0" 3 1 1/2" = 1'-0" CAMBRIDGE 1 PERMITHISTORIC & SEALANT (AS REQ'D) METAL CHANNEL (BEYOND) CONSTRUCTION ELECTRICAL CONDUIT FINISH TO MATCH ALUMINUM COMMISSION (REFER TO ELECT) CHANNEL DOCUMENTS WELD BOLLARD TO CL BASE PLATE STAMP:

HEAVY DUTY MASONRY ANCHOR MIN. EMBEDMENT 4" DEEP 1" THICK GLASS

9" ROUND SS BASE PLATE OR N F IO T CT NO U TR NS CO STAINLESS STEEL ANGLE W/ SPACER, TYP.

REVISIONS:

No. Date Description

ALUMINIUM GLAZING CHANNEL TYPICAL SECTION DETAIL AT BASE OF BOLLARD (BEYOND) 6 1 1/2" = 1'-0" SECTION DETAIL AT PINNED CONNECTION OF GLASS FIN METAL CHANNEL SCRIBED 2 1 1/2" = 1'-0" TO PILASTER BASE, CAPITAL AND SHAFT. FINISH TO MATCH ALUMINUM FASTNER (AS REQUIRED) 1 GLAZING CHANNEL SEALANT AND BACKER ROD SEALANT AND BACKER ROD (BOTH SIDES) ALUMINUM GLAZING CHANNEL ALUMINIUM GLAZING CHANNEL (BEYOND)

1" GLASS FIN, REFER TO SPEC. ANGLE BOLTED TO STARTER PLATE

TERRAZZO FLOORING. 1" LAMINATED GLASS FIN PROVIDE SCHLUTER STRIPS AROUND FIN FOR TERRAZZO LEVEL 1 FLOOR STOP 33' - 6" ALUMINIMUM GLAZING CHANNEL AT JAMB

KEY PLAN PLAN DETAIL AT JAMB DRAWING TITLE: 5 3" = 1'-0"

FRAMLESS GLASS DOOR PORTICO

SEMI-CONSEALED EXPOSED ALUMINUM DETAILS ALUMINUM GLAZING GLAZING CHANNEL CHANNEL

ALIGN ALIGN " 4 / 3 1

" 0" 8 " / 3

2 STARTER PLATE BOLTED TO / 1 3 " 2 16 / 9 4" " 3 16 / 5 4" 3 4"

2" STRUCTURE " " 4 / " 8" 8 1 / 4 3 / " 1 " 4 6" 2" / 16 " 1 / 10" " " 11 4 / 8 16 1 / / 3 11 Project No. 19055 NEW BEAM NEW THINSET TERRAZZO REFER TO STRUCT. DWG Drawn By VW 7 SHIM AS REQUIRED A5.01 EMBEDDED AUTOMATED Date 08/21/202009/10/2020 DOOR OPERATOR Scale As indicated SECTION DETAIL AT BASE OF STRUCTURAL GLAZING SECTION DETAIL AT BASE OF GLASS SUPPORT FIN DRAWING NUMBER: 4 3/8" = 1'-0" 1 1 1/2" = 1'-0" A5.01 9/9/2020 5:06:19 PM CLIENT: © Copyright Arrowstreet Inc. © Copyright Address

ARCHITECT:

CONSULTANTS:

D.1 B.6 B.5 B.3 B.2 A.1

ROOF PROJECT INFORMATION: 75' - 5" HARVARD

LEVEL 4 65' - 11" COOP BOOKSTORE

LEVEL 3 RENOVATIONSISSUANCE: 54' - 11" CAMBRIDGE PERMITHISTORIC & LEVEL 2 44' - 0" CONSTRUCTIONCOMMISSION DOCUMENTS

STAMP: LEVEL 1 33' - 6"

EXISTING WEST ELEVATION AT PALMER STREET 4 1/8" = 1'-0"

REVISIONS: A B C D No. Date Description

14 13 12 11 7 6 5 4 3 2 1

ROOF ROOF ROOF 75' - 5" 75' - 5" 75' - 5"

LEVEL 4 LEVEL 4 LEVEL 4 65' - 11" 65' - 11" 65' - 11"

LEVEL 3 LEVEL 3 LEVEL 3 54' - 11" 54' - 11" 54' - 11"

KEY PLAN

LEVEL 2 LEVEL 2 LEVEL 2 DRAWING TITLE: 44' - 0" 44' - 0" 44' - 0" EXISTING BUILDING LEVEL 1 LEVEL 1 LEVEL 1 33' - 6" 33' - 6" 33' - 6" ELEVATION

EXISTING SOUTH WEST ELEVATION AT ALLEY EXISTING SOUTH ELEVATION AT ALLEY EXISTING EAST ELEVATION AT MASS AVE Project No. 19055 3 1/8" = 1'-0" 2 1/8" = 1'-0" 1 1/8" = 1'-0" Drawn By Author Date 08/21/202009/10/2020 Scale 1/8" = 1'-0"

DRAWING NUMBER: PR1.0 9/11/2020 12:56:02 PM CLIENT: NEW WOOD WINDOWS TO MATCH EXISTING • MANUFACTURER: MARVIN • COLOR: VINYL CLAD EXTERIOR, CASHMERE • LOW E DOUBLE STRENGTH TEMPERED GLASS • INTERIOR/EXTERIOR GRILLES WITH SHADOW STOP GRILLE BETWEEN GLAZING • CUSTOM MAHOGANY SILL WRAPPED WITH STONE COLOR BREAK METAL

ARCHITECT:

CONSULTANTS:

PROJECT INFORMATION: D.1 B.6 B.5 B.3 B.2 A.1 HARVARD COOP BOOKSTORE REPLACE EXISING WINDOWS IN KIND ROOF RENOVATIONSISSUANCE: 75' - 5"

W8 EXISTING PEDESTRIAN CAMBRIDGE BRIDGE TO PERMIT & REMAIN LEVEL 4 65' - 11" HISTORIC CONSTRUCTIONCOMMISSION W10 W10 DOCUMENTS

STAMP: LEVEL 3 54' - 11"

W8 W8 W8 W8 R O ON 14' - 0" 14' - 0" 14' - 0" F TI OT C BUILDING SIGNS (BY OTHERS) LEVEL 2 U 2' - 0" N R 44' - 0" T NS CO

LEVEL 1 33' - 6" REVISIONS: INFILL WALL AT REMOVED GLAZING SYSTEM. MATCH EXISTING BRICK FINISH NEW KNOX BOX. CONFIRM EXACT QUANTITY/ AND LOCATION WITH No. Date Description WEST ELEVATION AT PALMER STREET FIRE DEPARTMENT 4 1/8" = 1'-0"

A B C D

14 13 12 11 7 6 5 4 3 2 1

ROOF ROOF ROOF 75' - 5" 75' - 5" 75' - 5"

LEVEL 4 LEVEL 4 LEVEL 4 65' - 11" 65' - 11" 65' - 11"

W12 W12 W12

KEY PLAN LEVEL 3 LEVEL 3 LEVEL 3 54' - 11" 54' - 11" 54' - 11" DRAWING TITLE:

NEW STRUCTURAL GLAZED WALL AND EXTERIOR DOOR SYSTEM WITH TOUCHLESS ENTRY LEVEL 2 LEVEL 2 LEVEL 2 ELEVATIONS 44' - 0" 44' - 0" 44' - 0" BOLLARDS WITH AUTOMATED DOOR OPERATOR, WITH WAVE SENSOR, TYP.

EXISTING FIRE Project No. 19055 ALARM STATION AND LEVEL 1 LEVEL 1 LEVEL 1 KNOX BOX TO Drawn By VW 33' - 6" 33' - 6" REMAIN 33' - 6" PROVIDE BOLLARDS AT GAS METER. 5'-0" WIDE AREA OF PROTECTION REQUIRED. COORDINATE EXACT LOCATIONS WITH GAS COMPANY. Date 08/21/202009/10/2020 Scale 1/8" = 1'-0" SOUTH WEST ELEVATION AT ALLEY SOUTH ELEVATION AT ALLEY EAST ELEVATION AT MASS AVE DRAWING NUMBER: 3 1/8" = 1'-0" 2 1/8" = 1'-0" 1 1/8" = 1'-0" A3.01 9/11/2020 12:55:58 PM 14'-0"

9'-4 3/4" 1 3/4" 3'-8 1/2" 5'-3" 1'-1" 2'-0" HARVARD

DETAIL: Palmer Street Exterior Sign 1 Scale: 3/4"=1'-0"

EXISTING PANELSSIGNAGE ON PALMER STREET • 1 3/4” Faux rivet painted textured black • Painted textured black

• 1/2” metal panel mounted • Faux rivets attached to face 1” off brick wall

LETTERS • 1/2” painted white acrylic letters pin mounted to panel

PROPOSED SIGNAGE ON PALMER STREET

THE COOP HARVARD / EXTERIOR IMPROVEMENTS 10 SEPTEMBER 2020 Glass FabricationOperators and a simple wave-to-open Sketch switch. Now the door in front of you can be opened with just a wave of your hand! Glass Solutions A. PFD-10 Bottom Patch Pivot/Floor Closer Insert PFD-20 Top Patch DOOR HARDWARE Pivot Insert PFD-22 TopFor Patch installation instructions please visit our website www.assaabloyglass.us ESK-SGL Available Overhead Concealed Closer Insert Finishes: PFD-10/20/22-TAPCVR (PFD-10 shown) Tapered Patch Fitting Cover • US32D/630 • US32/629 DIMENSIONS IN• INCHES314E (MILLIMETERS) B. PFT-34 Transom Patch, Wall Bracket • 10BE/StockA (Tapered cover shown) B Powder Coats -P Pivot InsertNOT Included TO SCALE • BSP -S Stop Insert Option (Black Suede Powder Coat) PFD-20/2 -B Blank Insert Option • WSP (White Suede Powder Coat) Fabrication Ske C. PFT -40 Sidelite Transom Patch 7 2" -P Pivot Insert Included 6 /16" (51) -S Stop Insert Option (163) AUTOMATIC DOOR OPENING ELECTRIC -B Blank Insert STRIKE Option 1 SENSOR - Effective date: FINISH - DARK BRONZE 1 /4" D. PFT-41 Sidelite Transom Fin Patch WAVE TO OPEN SWITCH June 2, 2017 Glass Solutions -P Pivot Insert Included (32) C D -S Stop Insert Option Supercedes: All Previous Specifications: -B Blank Insert Option ROUND BOLLARD BASE EXAMPLES FEATURES: www.NortonDoorControls.com 3 The HES Folger Adam 310-1 ( /4) is an industrial grade electric strike designed ASSA ABLOY Glass Door specifically for use in glass door applications with additionE. PFT-60 of a strike Sidelite plate. The Transom Patch stainless steel construction makes it ideal for strength and Stop corrosion and resistance. Blank Insert Included Patch Fitting products 1.5" ∅ HOLE I OPTIONS: 10" ∅ X .375" STAINLESS STEEL 10" ∅ X .375" STAINLESS STEEL 10" ∅ X .375" STAINLESS STEEL FOR ELECTRIC BASE PLATE BASE PLATE BASE PLATE conform to ANSI/BHMA DRT-4Latchbolt TaperedMonitoring (LCBMA): Door Sends signal Rail to accessF. PFT-61control system Sidelite when Transom Fin Patch BOLLAR latchbolt is disengaged. Available ∅ ∅ 1.5" HOLE IN MOUNTING BRACKET 1.5" ∅ HOLE IN MOUNTING156.7. BRACKET Stop and Blank Insert Included 1.5" HOLE IN MOUNTING BRACKET MOUNTIN Glass Solutions Finishes: FOR ELECTRICAL CONDUIT FOR ELECTRICAL CONDUIT -LH Left Hand, -RH Right Hand FOR ELECTRICAL CONDUIT 1/2" X 2 3 1/4-20 STAINLESS STEEL F.H.M.S. (4) PEM CLS NUTS ASSA ABLOY Opening Solutions • US32D/630 FOR SECURING THE BOLLARD (4) PEM CLS NU Glass Solutions G. PFT-62 Sidelite Transom Stop Patch Rockwood, PA • US32/629 BOLLARD WELDED TO THE MOUNTING REMOVABLE BOLLARD BOLLARD Phone: 855.594.6989 • Fax: 844.851.8665 • US28/628 BASE PLATE www.assaabloyglass.us H. PFT-70 Transom Stop Patch E • 314 F DRT-4 Tapered Door Rail Available Copyright © 2020, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction Stop in whole and Blank Insert Included 1/2" X 7" HEAVY DUTY MASONRY ANCHOR 1/2" X 7" HEAVY DUTY MASONRY ANCHOR 1/2" X 7" HEAVY DUTY MASONRY ANCHOR or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. Finishes: CS-ESK-SGL – 2/20 GLASS THICKNESS 1/2 I. PFT-71 Transom Connector Fin Patch 3 1 9 MIN • US32D/630 /8", /2", /16" • US32/629 • US28/628 ELE J. PFS-80 Sidelite Connector Patch • 314 HEIGHT 1/2" X 7" HEAVY DUTY MASONRY ANCHORS MINIMUM EMBEDMENT 4" DEEP 1/4 4" BOLLARD BO GLASS THICKNESS ELECTRICAL CONDUIT (BY OTHERS NOT WIKK IND.) 3 1 9 ELECTRICAL CONDUIT K. PFS-81 Sidelite Fin Patch /8", /2", /16" 1/4 USE FABRICATION SKETCH TO DRILL AND CUT GLASS.12" TALL MOUNTING BASE / SLEEVE (BY OTHERS NOT WIKK IND.) WELD HEIGHT 13 1/4" THICK ALUMINUM MA L. PFA-90 Sidelite 90° Angle Patch 4" (4) 1/4-20 STAINLESS STEEL F.H.M.S. Cut away glass (shaded area) along dotted line to match sketch dimensions. Drill1/2" X /7"16 HEAVY" (20DUTY MASONRY mm) ANCHOR diameter hole. BOLLARD MOUNTING BRACKET MINIMUM EMBEDMENT 4" DEEP ELECTRICAL CONDUIT 1/4-20 STAINLESS STEEL F.H.M.S. M. PFA-90-SH Sidelite 90° Short (BY OTHERS NOT WIKK IND.) 7 MASONRY MOUNTING SURFACE Angle Patch /8" FINISHED FLOOR / GRADE LINE MASONRY MOUNTING SURFACE 7 /8" 12.000" N. PFD-100L Bottom Patch Lock G 1/2"H X 7" HEAVY DUTY MASONRY ANCHOR MINIMUM EMBEDMENT 4" DEEP 5 STANDARD MOUNTING BASE Specifications: 6 /16" Specifications: 4" PART# 4M227 ASSEMBLY 4" MASONRY MOUNTING SURFACE DOORMATERIAL: RAIL PATCH FITTING Aluminum Body, Brite or Satin Stainless Steel Cladding (161)10" ROUND WELDED MATERIAL: 13 10" ROUND MOUNTING BASE FOR FINISH - DARK BRONZE 16 FINISH - EXTRABASE DARK PLATE BRONZE MOUNTING BASE FOR REMOVABLE BOLLARDS UP Aluminum Body,FEATURES: Brite or Satin Stainless Steel Cladding 5 / " REMOVABLE BOLLARD FOR BOLLARDS TALLER THAN 50", 7" ANCHOR KIT 19 RECOMMENDED. Lateral Adjustable Blocking. Wedge clamping system 1 /32" for easy installation. (148) FEATURES: MOUNTING BASE DESIGN FOR SURFACE MOUNT OR IN GROUND MOUNT MOUNTING BASE DESIGN FOR A SURFACE MOUNT REMOVABLE OPTIONS: 9 19 Lateral Adjustable Blocking. Wedge clamping system 1 /16" 32 10" ROUND BASE PLATE USED AS A HEAVY DUTY ALTERNATIVE TO OUR STANDARD MOUNTING BOLLARD WITH A STANDARD CONCEALED BASE BOLTED TO A Fabricated and supplied with standard closer or pivot 1 / " 7 BASE. HEAVY DUTY BASE PLATE 1 /8" WITH WELDED CONCEALED SLEEVE (CS) for easy installation.components and deadbolt lock. Custom fabrication 4" TA 2" for competitor’s hardware available upon request MOU (consult factory for compatibility).

OPTIONS: 9 MOUNTING BASE DESIGN FOR A REMOVABLE BOLLARD WITH AN IN 1 /16" (8) 1 Fabricated and300 Main supplied Street with standard closer or pivot FULL HEIGHT L-SHAPEDGROUND MOUNTEDPULL CONCEALED SLEEVE (CS) AND HEAVY DUTY BOLLARD 7 Rockwood, Pennyslvania 15557 1 /8" BASE PLATE. componentsP: and 855.594.6989 deadbolt • F: 844.851.8665 lock. Custom fabrication FINISH - DARK BRONZE ANODIZED (4) 1 www.assaabloyglass.us 2" FINISH - EXTRA DARK BRONZE for competitor’[email protected] hardware available • [email protected] upon request SIMPSON DMSA50 SCREW MACHINE MINI ANCHOR AND BOLT (consult factory for compatibility). 4.000" 3 I 7 J K 1 /8" Copyright © 2017, Rockwood Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. 16 MASONRY MOUNTING SURFACE Reproduction in whole or in part without the express written permission of Rockwood Manufacturing Company is prohibited. 1 / " CS-DRT-4 – 7/17 300 Main Street 1 8 3 (36) Rockwood, Pennyslvania 15557 THE COOP HARVARD(37) / EXTERIOR IMPROVEMENTS rad. 3 / " rad. 2 /16" 10 SEPTEMBER 2020 P: 855.594.6989 • F: 844.851.8665 TALL STYLE (STANDARD) MOUNTING BA www.assaabloyglass.us (80) PART# 4M227-4" BASE KT [email protected] • [email protected] (55)

10" ROUND WELDED BASE PLATE WITH 11 OPTIONAL LOW PROFILE MOUNTING BOLTS 2 /16"