Mike's "A" FORD-ABLE Parts SPECIALITY

1929 Cabriolet 68A 1930 - March 1931 Cabriolet 68B March 1931 Cabriolet 68C 1928 - 1929 Town 140A November 1930 Victoria 190A May 1931 Sedan 400A

Mr. C. Cupp's 1931 Cabriolet 68C - An absolutely imaculate

car down to every nut SPECIALITY CARS and bolt.

Index Page # Index Page # Accessories & Gift Ideas ...... Spec. 2 Seat Parts ...... Spec. 64 Cowl Lights ...... Spec. 49 Sheet Metal ...... Spec. 4 Dash & Dome Light ...... Spec. 61 Sill Plates ...... Spec. 63 Door Handles & Parts ...... Spec. 28 Spare ...... Spec. 8 Drum Tail Light ...... Spec. 58 Speedometer ...... Spec. 42 Fenders & Brackets - Rear ...... Spec. 9 Spring - Rear ...... Spec. 15 Floorboards and Parts ...... Spec. 35 - Seat ...... Spec. 67 Garnish Moldings & Frames ...... Spec. 63 Tail Lights ...... Spec. 53 Gas Gauge ...... Spec. 41 Top Parts ...... Spec. 26 Gas Tank ...... Spec. 36 Turn Signals ...... Spec. 60 Glass Sets & Pieces ...... Spec. 21 Upholstery ...... Spec. 67 ...... Spec. 10 Window Shades & Brackets ...... Spec. 28 Insulation Kits ...... Spec. 34 and Parts ...... Spec. 19 Mirror ...... Spec. 46 Wipers ...... Spec. 22 Rumble Parts ...... Spec. 15 Wood ...... Spec. 6 Always Open 24/7 Shop Online at www.mikes-afordable.com Spec.1 Mike's "A" FORD-ABLE Parts Windwing Clamps Accessories & Gift Ideas These clamps are chrome plated for the windwing glass.

Ford Color Prints Beautiful prints of Made in America cars. Full color prints are from original paintings by Ford Motor Company illustrator Don Pacitti. You can order these prints with or without the Wood Grain finished frame with gold highlights. You can order these prints with or without the Wood Grain finished frame with gold A18200C 28-31 Price Set/8 $ 75.00 highlights. Trunks This is a good quality, felt lined, with all the hardware and leather straps. A locking key included. 13 x 34 x 20" High. Prints ONLY - 11" x 14" A91140 28-29 Deluxe Town Car - 140A Tapered Backs are for Victoria with a side mounted spare. Price Ea. $ 3.00 A18574SB 28-31 Black Price Ea. $ 350.00 A18574ST 28-31 Tan Price Ea. $ 350.00

The Straight Back trunk is made for the Cabriolets & 400A. A18574OB 28-31 Black Price Ea. $ 350.00 A18574OT 28-31 Tan Price Ea. $ 350.00

PLEASE NOTE: DUE TO THE SIZE AND WEIGHT OF THE TRUNKS THERE WILL BE AN ADDITIONAL SHIP- Prints ONLY - 12" x 18" PING CHARGE. PLEASE CALL FOR CURRENT PRICES. A91368A 1929 Cabriolet 68A A91368C 1931 Cabriolet 68C Trunk Straps For mounting your trunk to the rack.

SPECIALITY CARS SPECIALITY A91400 1931 Convertible Sedan - 400A Price Ea. $ 4.00 1" Wide by 72" Long. Nickel Plated Hardware. These are included with a Framed Prints ONLY - 11" x 14" new trunk. Need 2 per Trunk A91140F 28-29 Deluxe Town Car - 140A A18574B 28-31 Black Price Ea. $ 23.75 Price Ea. $ 18.00

A18574T 28-31 Tan Price Ea. $ 23.75 Framed Prints ONLY - 12" x 18" A91368AF 1929 Cabriolet 68A Trunk Boots A91368CF 1931 Cabriolet 68C These will protect your trunk from A91400F 1931 Convertible Sedan - 400A the elements. It slips over the trunk Price Ea. $ 18.00 and fastens with velcro. For trunks 12 3/4 d, 34 1/4 w, and 20"h. Windwing Glass A18575BSB 28-31 Straight backed Trunks - Black This glass is cut to the Price Ea. $ 79.95 original specs and is beveled. A18575TSB 28-31 Straight backed - Light Tan Sold in pairs only. Price Ea. $ 79.95 The design is etched onto the glass A18575BCB 28-31 Curved Back - Black with silk screen fired ceramic. Price Ea. $ 79.95 Etched are not available. See Page Gen. 17 for Luggage Rack. A79982 30-31 Victoria - 14" Tall Price Pair $ 39.95

Spec.2 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts Car Covers For indoor storage only. Poly cotton material.

C115PD Victoria & 400A C14702PD Cabriolet Price Ea. $ 149.95

Data Plate Rivets This pack of 12 rivets will attach your data plate on the A. 1931 400A

#100 28-31 Price Set/12 $ 1.50

Data Plates The Cabriolets used either the Murray or the Briggs data plate on the outside of the firewall on the passenger side. SPECIALITY CARS

A18651 28-31 Briggs Price Ea. $ 1.50

A18652 28-31 Murray Price Ea. $ 1.50

See "How to Restore your Model A - Vol. 6" Page 113 for information on restoring a 1931 Cabriolet 68C.

Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Always Open 24/7 Shop Online at www.mikes-afordable.com Spec.3 Mike's "A" FORD-ABLE Parts Triangle Support Bracket Sheet Metal These attach to the curved inner panel. 9 3/8" High x 9 1/2" Long.

PLEASE NOTE: Due to the size of A161H 29-31 Cabriolet certain pieces of sheet metal additional Price Pair $ 59.95 shipping charges may apply.

Rear Outer Panel Below Deck Lid

A162HC 1930 Cabriolet Price Pair $ 59.95

Trunk or Rumble Seat Platform AM103 30-31 Cabriolet - 7 5/8" High Cabriolet's used this panel even when Price Ea. $ 46.00 installing a trunk.

Rear Outer Panel Below Deck Lid Screws 8 x 12/24 x 5/8" Pan Head Screws and Lockwashers A159A 28-31 Original Design Price Ea. $ 69.00

A80163X 28-31 Price Set/16 $ 1.60 Trunk or Rumble Floor Pans This is the piece that you would put Rumble Seat Compartment Curved Inner Panel your feet onto. Angled Style used When converting from a trunk to a Rumble Seat, this panel is with Seat Riser. needed. The top of this panel, mounts to the panel below deck lid, with a maximum height of 12 1/8" and the bottom sits on top of the rumble platform on '29-'31 Cabriolet.

SPECIALITY CARS SPECIALITY A151A 29-31 Cabriolet - Stationery or Non Adjustable Seat Price Ea. $ 57.00

These Cabriolet Panels are for cars with Fixed or Adjustable seats.

A361A 29-31 Price Ea. $ 45.00

Curved Inner Panel Screws 6 x 10/32 x 5/8" Oval for Top Edge. 8 x 1/4-20 x 1/2" Oval with Lock Washers and A352A 1929 Cabriolet 68A Square Nuts for the bottom. Price Ea. $ 55.20

A80161X 28-31 Price Set/30 $ 1.90

Spare Tire Brace This brace supports the inside of the A352AC 30-31 Cabriolet 68B - 4 Sided outer panel for the bracket. Price Ea. $ 55.20 Can be used on 28-29 panels, but must be shortened to fit.

A163ABR 28-31 Price Ea. $ 21.00

A352BC 1931 Cabriolet 68C - 6 Sided Price Ea. $ 55.20

Spec.4 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts Front Seat Back Rest Riser Lower Cowl Patch Back rest spring sits on this part. This special Cowl Patch will only work on the 1929 Cabriolet.

For Cabriolet Non adjustable Seats Only A014-4DC 1929 Price Pair $ 32.95 A632B 30-31 Cabriolet Price Ea. $ 80.00 Rear Quarter Patch Panels Front Seat Riser Mike also has these steel risers available which fit between the seat springs and the floor. Straight Edge - 16 1/2" x 6 1/2" A350A 28-29 Cabriolet A321A 1930 Cabriolet Price Pair $ 49.95 Price Ea. $ 57.50 Windshield Header Garnish Panel Under Seat Frame The Victoria used this garnish above the windshield. It's also This goes under the Seat known as the header upholstery retainer. SPECIALITY CARS Riser and serves as Primed and ready to paint. a Floor Pan.

A542 30-31 Price Ea. $ 89.95 A316AH 1929 Cabriolet Price Ea. $ 49.00 Door Sill Panel This metal strip is nailed to the wood subrails on Cabriolets.

A48696 30-31 Price Ea. $ 46.95

27 1/2" Long x 11 1/2" Wide x 2 1/2" Deep Rumble Hinge Brace - Cabriolet A68C 1931 Late 1931 Cabriolet Your Rumble Hinge Mounting Bracket bolts to these Braces. 2 Slant Windshield 68C 1/4" High and 18" Long. Price Ea. $74.70

Door Bottom Outer Patch Panels

A162A 28-29 Price Pair $ 51.00 A162B 30-31 Price Pair $ 51.00

A308V 30-31 Victoria & 400A Front Raingutter Support Bracket to Fenderwell Support Price Pair $ 36.95 or Compartment Brace. For the 1928 thru Early 1931 Trunk or Rumble - 3 1/2" Wide at Door Bottom Inner Patch Panel top, 23" Long and 2" wide in the middle. For the Late 1931 Trunk Panel used on Victoria's and 400A's. or Rumble - 3 1/4" Wide at top, 17 1/2" Long, and 2" wide in the the middle.

A166A 28 - Early 1931 Price Pair $ 51.00 A308V1 30-31 Price Pair $ 42.00 A166B Late 1931 Price Pair $ 51.00 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Always Open 24/7 Shop Online at www.mikes-afordable.com Spec.5 Mike's "A" FORD-ABLE Parts Dome Light Wood Block This wood block fits between the Wood roof ribs to mount the dome light onto.

Welcome to Mike's Wood Section. We have a selection of wood available for the Specialty Victoria Leatherback - 190A Vehicles, made out of the finest wood A13760 Price Ea. $ 13.50 available. Each Piece is custom made to fit exactly like it was originally made using top quality hardwoods - oak, ash or poplar. We do not stock these items, they will be shipped directly from the manufacturer - separate Victoria Slantwindshield & shipping charges will apply. Steelback Fordor - 160B & 160C UNFORTUNATELY DUE TO THE A13765 Price Ea $ 13.50 AMOUNT OF RETURNS INDIVIDUAL WOOD PIECES ARE NO LONGER Headers AVAILABLE. AWD1000-1 1931 Convertible Sedan 400A Price Ea. $ 89.50 AWD1060-1 30-31 Victoria 190A ******* MIKE'S TIPS ******* Price Ea. $ 89.50 AWD-KA-1 1931 Cabriolet 68C Slant Windshield If you are having a problem with your Doors, Price Ea. $ 89.50 or your Hood will not line up with your AWD-LA-1 30-31 Cabriolet 68A & 68B Straight Radiator Shell and Cowl - additional Windshield Shimming is required, usually under the Price Ea. $ 89.50 cowl section. Align the hood first, then work back. Body to Frame Mounting Bolt Sets Body to frame bolts were different for each year and body style car. These complete kits come SPECIALITY CARS SPECIALITY with complete instructions. Top Wood - All of the wood from the top of the doors up. 400A A90411 1931 Price Set/46 $ 9.95 Ribs - These go across the roof and support the top. Cabriolet Belt Rail - Around the edge of the body where the top A90414 1929 Price Set/50 $ 9.95 meets the body. Cabriolet Body Wood - Structural Wood inside the body - Does A90415 30-31 Price Set/48 $ 9.95 NOT include wood, Belt Rail or Door wood, unless specified. Cabriolet A90416 1931 Price Set/50 $ 9.95

Headers - Wood above the windshield - Always included in Victoria the Top Wood Kits. A90419 30-31 Price Set/54 $ 9.95

Spec.6 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts Top Wood Kits Door Wood Kits Includes Header. Everything above the door opening. AWD1291-4 1929 Cabriolet 68A - Early with door AWD1000 1931 Convertible Sedan A400 lock in handle Price Kit $ 500.00 Price Kit $ 565.00 AWD1060-L 30-31 Victoria 190A Leatherback AWD1292-4A 29-30 Cabriolet 68A & 68B with wood Price Kit $ 850.00 window riser mounting board AWD1060-S 30-31 Victoria 190A Steelback (Lock not in Handle) Price Kit $ 800.00 Price Kit $ 565.00 AWDKA 1931 Cabriolet 68C Slant Windshield AWD1292-4 29-31 Cabriolet 68A & 68B with mtl Price Kit $ 395.00 window riser mounting AWDLA 29-31 Cabriolet 68A & 68B Straight Price Kit $ 309.00 Windshield Price Kit $ 395.00 Belt Rails and Tack Rails These Belt and Tack Rails are included in the Body Wood Kits. Body Wood Kits Body Shell wood less Top, Chassis & Door Wood. AWD1001-2 1931 Convertible Sedan 400A - 3 Pieces AWD1001 1931 Convertible Sedan A400 Price Kit $ 215.00 Price Kit $ 800.00 AWD1260-L2 30-31 Victoria 190A Leatherback - AWD1260-L 30-31 Victoria 190A Leatherback 5 Pieces Price Kit $ 1000.00 Price Kit $ 145.00 AWD1260-S 30-31 Victoria 190A Steelback AWD1260-S2 30-31 Victoria 190A Steelback - Price Kit $ 993.00 5 Pieces SPECIALITY CARS AWD1292 29-31 Cabriolet 68A & 68B Straight Price Kit $ 145.00 Windshield AWD1292-2 29-31 Cabriolet 68A & 68B - 3 Pieces Price Kit $ 285.00 Price Kit $ 129.00 AWDKB 1931 Cabriolet 68C Slant Windshield AWDKB-2 1931 Cabriolet 68C Slant Windshield Price Kit $ 295.00 3 Pieces Price Kit $ 129.00 Chassis Wood Kits Sills & Crossmembers. For Tack Rail Fittings see the Upholstery AWD500 30-31 Victoria 190A Steelback or Section on Page Gen. 232. Leatherback (Specify fixed seat or adjustable seat) Seat Frame Wood Kits Price Kit $ 695.00 AWD1002 1931 Convertible Sedan A400 AWD1502 Late 1931 Cabriolet 68C Backrest Price Kit $ 662.00 Price Ea. $ 79.50 AWD1350 29-30 Cabriolet Fixed Seat - Specify AWD1508 28-29 Cabriolet 68A & 68B 68A or 68B Fixed Seat - Front Cushion Price Kit $ 662.00 Price Ea. $ 85.00 AWD1360 30-31 Cabriolet 68B - Adjustable Seat AWD1509 28-29 Cabriolet 68A & 68B Price Kit $ 662.00 Fixed Seat - Seat Back AWD1393 1931 Cabriolet 68C Slant Windshield Price Ea. $ 77.50 Price Kit $ 662.00 AWD1510 30-31 Cabriolet 68B Seat Carriage Bottom Frame - Adjustable Seat Price Ea. $ 82.00 AWD1510-B 30-31 Cabriolet 68B Seat Spring Frame - Adjustable Seat Price Ea. $ 78.00 AWD1511 30-31 Cabriolet 68B Backrest Price Ea. $ 82.00 AWD1515-R 30-31 Victoria 190A Right Front Seat Bottom - Fixed Seat Price Ea. $ 40.00

Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Always Open 24/7 Shop Online at www.mikes-afordable.com Spec.7 Mike's "A" FORD-ABLE Parts AWD1515-L 30-31 Victoria 190A Left Front Seat Bottom - Fixed Seat Price Ea. $ 40.00 Spare Tire AWD1516-L 30-31 Victoria 190A, Convertible Sedan 400A Sedan Left Only Coupe specific items are listed here, for Front Seat Bottom - Adjustable more Spare Tire related items and accessories Seat see page Gen. 39. Price Ea. $ 46.00 AWD1516-R 30-31 Victoria 190A, Convertible Sedan 400 Sedan Right Front Rear Spare Tire Carrier Seat Bottom - Adjustable Seat Carrier for the Cabriolet. Cast aluminum. Price Ea. $ 54.00 Studs included. Paint black. AWD1517 30-31 Victoria 190A Rear Cushion - all models Price Ea. $ 97.00 A1379AR 28-29 Price Ea. $ 47.50 AWD1518 30-31 Victoria 190A Rear Backrest - A1379B 30-31 Price Ea. $ 47.50 all models Price Ea. $ 93.00 Rear spare Wheel Mount to Body Bolts AWD1519 1931 Convertible Sedan 400A - Rear The bolts for the Rear Spare Tire Carrier Cushion above. Price Ea. $ 97.00 AWD1527 1931 Convertible Sedan 400A - Rear Backrest Price Ea. $ 84.00 A1379AMB 28-29 Price Ea. $ 2.10 A1379BMB 30-31 Price Ea. $ 2.50

Spare Tire Support Used on the rumble seat of the Cabriolet with a rear mounted spare tire. Contoured to follow the curved inner panel. The top bolt on the carrier goes through the hole at the bottom. SPECIALITY CARS SPECIALITY A1401 30-31 Price Ea. $ 7.10

Spare Tire Brace This brace supports the inside of the outer panel for the spare tire bracket Can be used on '28-'29 panels, but must be shortened to fit.

A163ABR 28-31 Price Ea. $ 21.00

Rear Spare Wheel Tire Stud Used on the Coupe, bottom stud only, the top two are the A1448 (Side Spare Wheel Tire Carrier Bolt) see page Gen. 39.

A1449 28-31 Price Ea. $ 1.65

Spec.8 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts Cabriolet & Victoria Rear Steel Fenders: These are very well-made reproductions Rear Fenders & Brackets using the same gauge steel as Ford used. Please read the instructions above. As front fenders are generic to all Model A's THESE ARE SOLD IN PAIRS ONLY! they are still in there own Section - See Page Gen. 199 & 200 For Front Fenders Cabriolet A16160/61A 28-29 Left & Right Price Pair $ 520.00 Open and Closed Cab Rear Fenders A16160/61B 30-31 Left & Right Please read carefully before purchase. Price Pair $ 520.00

Fiberglass Fenders - A complete line of fiberglass fenders are Victoria available. These are all hand laminated with fiberglass matte and A16160/61D 28-29 Left & Right special resins to achieve the optimum in strength. Price Pair $ 620.00 A16160/61C 30-31 Left & Right Please Note: Additional shipping will apply due to large boxes. Price Pair $ 620.00 These are special orders, please allow three to four weeks for delivery. Rear fenders will be shipped by courier and are charged Rear Bracket according to the box size. Here are the pressed steel rear fender brackets for the Cabriolet. Steel Fenders - It is important when fitting sheet metal to your car to FIRST fit before painting or drilling any holes. Many times it is necessary to use C-Clamps, vise grips or a drift pin to locate holes SPECIALITY CARS for alignment. In order to secure a proper fit and alignment, it is normally necessary to loosen all attaching sheet metal parts. Some A16180A 28-31 Price Ea. $ 24.70 reworking may be necessary as mating parts many come from different suppliers or new parts versus 80 year old parts are placed Rear Fender Bracket Bolts together. Some metal parts may have been treated with oil or may This set of bolts and castle nuts will still have residue from forming oils. It is necessary to thoroughly attach both rear fender brackets to the clean the metal with a metal prep or solution to remove all oils and body. / or fingerprints before painting. A16181MB 29-31 6 5/16" - 24 x 1 " + l.w & nuts NO RE-WORKED, RUSTED OR PAINTED Price Set/10 $ 2.50 FENDERS ARE ACCEPTABLE FOR RETURN. Rear Fender Washers & Nuts Rear Fiberglass Fenders: If your studs (A081MB) are OK, then this set of 8 Flat Washers, Cabriolet Lockwashers and 5/16-18 Nuts are used to mount rear 1928 - 1929 fenders to body. F16161A Left Price Ea. $ 199.00 F16160A Right Price Ea. $ 199.00

1930 - Early 1931 A16195 29-31 Price Set/24 $ 1.50 F16161B Left Price Ea. $ 199.00 F16160B Right Price Ea. $ 199.00 Rear Fender Mount Studs These are the special oversized head bolts Victoria that get welded or brazed to the body to 1928-1929 mount the rear fenders on. F16311A Left Price Ea. $ 199.00 F16310A Right Price Ea. $ 199.00 A081MB 28-31 4 studs needed per fender Price Ea. $ 0.50 1930 - Early 1931 F16311B Left Price Ea. $ 199.00 Fender Welt F16310B Right Price Ea. $ 199.00 Mike has this 17 foot roll of the 3/16" black beading used on the fenders. A3404FW 28-31 Price Ea. $ 9.90

Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Always Open 24/7 Shop Online at www.mikes-afordable.com Spec.9 Mike's "A" FORD-ABLE Parts Hood Safety Supports HOOD Mounts on the hood rods, and hooks to hood rod bracket on Hood Handle firewall. When you raise the hood, set the bottom edge of the hood on These are pressed steel the hooked end of the arm - protective plastic handles which mount in the covers the wire. Set includes left and right side wire. middle of the side panels to Instructions included. lift the hood. A16714A 28-29 Price Set $ 21.95 Rivets Included. Use Rivet Tool RA2022 on Page Gen. 28. A16714B 30-31 Price Set $ 21.95 A16609 28-31 Price Pair $ 24.95

Comes with A16755 Modern Rivet Style Early 28 Hood (All Early '28 Cars) A16609SS 28-31 Stainless Price Pair $ 30.75 The early ’28 hood louvres were all the same length. From mid '28 the top of Hood Latch Brackets the louvres on the side had a slight taper. Trophy Quality. Paint Underside This is a complete set of brackets Lower Body Color. Includes Handles and hardware that the hood latch hooks A16609 and Hood Clip Brackets onto. Use rivets A16753. A16750CL. If you are using rivets, use Rivet Tool RA2022 on Page Gen. 28. A16610AR 1928 Price Ea. $ 405.00 A16750CL 28-31 Price Set/16 $ 4.95 1928-29 Fordor Sedan Hood This hood is for the 1929 Briggs Comes with A16753 Original Rivets, or you can order A16755 Fordor, 60A, B & C & 155B, Modern Style separately. 1929 Murray Fordor, A16750HCSS 28-31 Stainless 155A & 165A & Price Set/16 $ 12.05 1929 Cabriolet 68Aonly. Trophy Quality. Paint Underside Hood Handle & Latch Clip Rivet Set Lower Body Color. Has a bead on the side of the top panel and a different cowl contour. Includes Original style rivets for the hood handles Handles A16609 and Hood Clip Brackets A16750CL. SPECIALITY CARS SPECIALITY and clip brackets. Use RA2022 Rivet Tool. A16610ABR 28-29 Price Ea. $ 405.00

A16753 Price Set/20 $ 2.00 1928-29 Stock Hood This hood fits the 28-’29’ Model A's except for the Fordor Sedans Modern Style Hood Handle & Latch Clip Screw (see A16610ABR). Trophy Quality. Paint Underside Lower Body Color. Includes Handles A16609 and Hood Clip Brackets Set A16750CL. These screws are used on the Hood Handles and Hood Clips - not original. 26 3/4" 30" Arch These are stainless round head screws 20 13/16" with nuts that look like rivets from 15" the outside. No riveting needed!! 28 1/2"

A16755 Price Set/20 $ 4.95 16 3/4" 15 7/8" Hood Prop Kit These stainless steel props are an important add-on for 28 3/8" safety. The kit bolts onto the A16610A 28-29 Price Ea. $ 380.00 radiator braces and the fold out arms are rubber-coated to rest the hood on.

A16613SS 28-31 Price Kit $ 24.95

Spec.10 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts 1930-31 Stock Hood Hood Shelf Blocks All the ’30-’31 Model A's used this hood. Trophy Quality. Paint These wooden blocks go under the Underside Lower Body Color. Includes Handles A16609 and hood shelf. They act as spacers to Hood Clip Brackets A16750CL. mount the hood latch. 30 7/16" 20 13/16" 14 1/8" A16727S 28-29 Price Set/40 $ 6.75 31 7/16"

19 1/2" 19 3/16" Center Hood Bracket Attaches to the frame with rubber (A16761B - See Page Spec. 14) against the hood to prevent rattles. 31"

A16610B 30-31 Price Ea. $ 420.00 A16718S 30-31 Price Set/12 $ 5.50 Stainless Hood Rods Complete set of three hood rods. After punching these rods out Hood Retainer (Front) about 1", use a variable speed drill, chuck it to the rod and spin the The center hood rod hooks onto this rod as you pull it out. clip on the radiator shell. Paint Black

A8220C 28-31 Price Ea. $ 3.15 SPECIALITY CARS

A16611A 28-29 27 3/4" Long Hood Retainer Mount Set (Front) Price Set/3 $ 14.95 A pair of tube rivets to mount the center A16611B 30-31 30 1/2" Long hood rod brackets. Use Rivet Tool RA2022 Price Set/3 $ 14.95 Page Gen. 28.

Hood Corners Triangle leather hood corners A8220MB 28-31 Price Pair $ 0.50 originally were on the rear only. Use Rivet Tool RA2022 on Hood Rod Retainer (Rear) Page Gen. 28. Rivets to be painted This is the rear retainer for the black. hood. Paint body color. A16622LS 28-31 9/64 x 5/16 tubular rivets Price Pair $ 3.90 A16735A 28-29 Price Ea. $ 5.10 Hood Corners These are molded rubber Standard Hood Hinge Rod hood corners; look good. Retainer (Rear) Use Rivet Tool RA2022 on Page Same as above but for different years. Gen. 28. Paint body color. A16622RS 28-31 Price Pair $ 3.90

Hood Shelf A16735B 30-31 Price Ea. $ 4.95 Not used on 1930-1931. See diagram on Deluxe Hood Hinge Rod page Spec. 12. Don't forget Retainer (Rear) Chrome A16727S Blocks. This serves the same purpose as A16735B, but has a finger which clamps A16713/14 28-29 Price Pair $ 33.95 over the cowl band. Normally only used on Deluxe '30-'31 Models. Order A16735BMB (Page Spec. 13) Screws. A16735C 30-31 Price Ea. $ 8.75

Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Always Open 24/7 Shop Online at www.mikes-afordable.com Spec.11 Mike's "A" FORD-ABLE Parts

INSTALLATION OF HOOD SHELF FOR 1928 - 1929 ONLY

A16750CL A16735AMB A16735A A16740AOR or A16740ARE A16750CL

A16622RS A16609

A16750BU A16750ABK or #30 A16750ASS A16750APAD A16622LS A16750BU A16718S

A16727S A16739A #30 SPECIALITY CARS SPECIALITY A16750APAD

A16528AS A16727S

A16713/14

Spec.12 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts Retainer Mounting Screws (Rear) Cowl Lacing Hook Screws to mount the rear hood retainer to the This is the special hook that the wire firewall. attaches to, to hold the cowl lacing on. 10-32 x 3/4" Special Clamp Screw Used with original A16740AOR. A16735AMB 28-29 2 x 12-24" x 5/8" round head Not included in lacing Kit A16740ARE Price Set/6 $ 0.95 or AOR. A16739AC 28-29 Price Set $ 1.95

Cowl Lacing Kit & Rivets Two types are available for the A16735BMB 30-31 2 x 12-24" x 5/8" flat head ’28-’29 A's. The original used wire Price Set/4 $ 0.95 to hold the lacing down on the gas tank and rivets on the cowl panels. Hood Retainer Shims Use Rivet Tool RA2022 on page Having alignment problems with your Gen. 28. hood? Place these steel shims between A16740ARE 28-29 Replacement the rear hood retainer and the cowl. Price Kit $ 8.60 Will help if the bottom of the hood is A16740AOR 28-29 Original hitting on the radiator shell. Price Kit $ 12.75

A16736A 28-29 Price Ea. $ 0.55 Cowl Lacing Screws A16736B 30-31 Price Ea. $ 0.60 Special pan headed replacement screws

for installing the ’30-’31 cowl lacing. SPECIALITY CARS Cowl Band Included in the cowl lacing kit This is a well made stainless (A16740BS). One for each side and the third top center. 3 12-24 steel reproduction. Some '28-'29 pan head screws Fordor Sedans had cowl bands. These '30-'31 reproduction bands A16740MB 30-31 Price Set/3 $ 0.75 will not fit the'28-'29' s. Special box for UPS - additional Authentic Cowl Lacing Kit shipping charges do apply. Just like the original for ’30-’31 A's. A16737CB 30-31 Price Ea. $ 73.00 Complete with all clips, screws, and rivets. Cowl Band Clips Use rivet Tool RA2022 on page Gen. 28. These clips go under the cowl panel screws on the firewall A16740BS 30-31 Price Kit/10 $ 15.45 and slip under the cowl band to hold it in place. 1930-31 Cowl Lacing Clip Replacement clips for the ’30-’31's A16738CL 30-31 Price Pair $ 3.35 if you've lost some. Included with kit A16740BS. Radiator Shell Lacing Use Rivet Tool RA2022 on This is a double beaded lacing for the page Gen. 28. radiator shell, comes with raven rivets. A16737 30-31 Price Ea. $ 0.75

Cowl or Radiator Rivets This is a package of 24 raven-finished A16739A 28-29 Price Set/25 $ 6.75 split rivets to attach the hood lacing.

A16739B 30-31 Price Set/25 $ 9.00 A16745 ANY Price Set/24 $ 1.20

Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Always Open 24/7 Shop Online at www.mikes-afordable.com Spec.13 Mike's "A" FORD-ABLE Parts Hood Latch Repair Kit Hood Latch Rivet Kit If possible try to repair your original These tiny rivets connect the latch handles. Our set does all 4 latches body of the hood latch to the and comes with complete instructions. mounting bracket. Use Rivet Tool RA2022 on page Gen. 28. A16749 28-31 Price Set/12 $ 12.50 A16751 28-31 Price Set/4 $ 0.50 This side towards Hood Latch Handle Hood We have both the original black three-hole Hood Latch Caps handles as well as stainless steel. This set of 8 rubber caps protects your finish from being scratched. 1 Set will do all four handles.

A16750CS 28-31 Price Set/8 $ 1.45 A16750ABK 28-29 Black Price Ea. $ 8.25 Hood Latch Bumper Set of 4 rubber bumpers that fit over the A16750ASS 28-29 Stainless - 3 Hole Mounting hood latch stem to reduce rattles. This Price Ea. $ 11.00 Latch bumper set cannot be used if you are using the Hood Bumper Set A16761 or A16761B.

A16750BU 28-31

#30 28-29 Hood Handle Screws Price Set/4 $ 3.00 Price Set/36 $ 2.25 Hood Bumper Set Hood Latch Pads Completeset of 6 round rubber These 4 rubber pads go under the hood bumpers with rivets. Four hood latches. for the hood and two for the centre hood braces. Place

SPECIALITY CARS SPECIALITY A16750APAD 28-29 Price Set/4 $ 4.10 one under each hood clip plus one on each support clip. Use Rivet Tool RA2022 on page Gen. 28.

A16761 28-31 from Aug 28 to May 31 A16750BPAD 30-31 Price Set/4 $ 4.10 Price Set/12 $ 3.50

Hood Latch Handle Hood Bumper Set We have both the original black Complete set of 2 round rubber two-hole handles plus modern bumpers for the inside center support stainless steel. plus 4 triangular ones to go under each hood clip. The supplier ships with rivets which is correct, but Mike recommends using screws This side to- and nuts to keep them in place. A16750BBK 30-31 Black wards Hood Price Ea. $ 8.25 A16761B 1931 May 31 'til end A16750BSS 30-31 Stainless - 2 Hole Mounting Price Set/12 $ 3.75 Price Ea. $ 11.00

#32 30-31 Hood Handle Screws Price Set/24 $ 2.25 Spec.14 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts

Rear Spring Rumble Parts

For more spring related items see page Deck Lids Gen. 98 of our general section. Mike has excellent steel rear deck lids with the D-nuts already attached Cabriolet & Victoria Rear Leaf Spring for your hinges. A good reproduction of the original. Clamps NOT included. For Clamps, bushings, Bolts and A1059AR 28-29 Steel - Rumble Nuts See Page 123. Price Ea. $ 495.00 Used on the '29-'31 Cabriolet 68A & A1059AT 28-29 Steel - Trunk B & '30-'31 Victoria. Price Ea. $ 495.00 A5560B 8 Leaf 28-31 A1059BR 30-31 Steel - Rumble Price Ea. $ 215.00 Price Ea. $ 495.00 A1059BT 30-31 Steel - Trunk Price Ea. $ 495.00

A1059ABS 28-31 Steel Deck Lid Skin Price Ea. $ 200.00

Deck Lid Inner Panels

Mike now has this Inner Trunk or Rumble SPECIALITY CARS Panel available for your Coupe.

Mike's Ahoy!!" A1059A1T 28-29 Trunk Price Ea. $ 276.00 A1059B1T 30-31 Trunk Price Ea. $ 276.00

A1059A1S 28-29 Rumble Price Ea. $ 276.00 A1059B1S 30-31 Rumble Price Ea. $ 276.00

Rumble Floor Mat & Studs Mike has the Rumble mats and studs available. 4 Piece Set.

A2054 28-31 Mat Price Ea. $ 34.95 A2057MB 28-31 Studs Price Set/8 $ 5.65

Rumble Stop Kit This complete set fits all years. You will need to drill the holes in this. The upper part is aluminum while the lower is stamped steel. The part with the rubber stop is on the top and the other is used under the seat frame as a brace. 52 Piece Set.

A41485CS 28-31 Price Set/52 $ 19.00

Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Always Open 24/7 Shop Online at www.mikes-afordable.com Spec.15 Mike's "A" FORD-ABLE Parts Grab Handles / Top Rest Rail Grab Handle Screws Mike has these stainless steel handles which mount on each This is a set of 4 each screws, nuts, and side of the rumble seat. The top rests on these when folded down. lock washers to attach your rumble seat Screws and nuts supplied. grab handles. Included with A41500SS.

#39 28-31 Price Set/12 $ 1.75

A41500SS 28-31 Price Pair $ 36.85 Rumble Alignment Plates These fit into the top corners of the rumble rain gutter to align the Grab Handle Positions rear lid when you close it. 1928 - 1929 Coupe Approx. 1" Approx. 1 1/2" A41506 28-31 Price Pair $ 3.45

Rumble Lid Trunk Alignment Plates These fit into the lower end of the trunk rain gutter to align the rear lid when you close it.

1930 - 1931 Coupe A41506TR 28-31 Price Set/8 $ 6.25 Approx. 1" Rumble Lid Bumper Set Here is a complete set of rubber stops for the top and bottom of the rumble lid. Rumble Lid Comes in Kit A41485CS.

Approx. 2" A41484S 28-31 Price Set/4 $ 3.95 SPECIALITY CARS SPECIALITY

Rumble Lid Bumper Bracket These steel brackets go in the upper corner of the rumble rain gutter to hold the rubber Top Rest Spacer Pads stops. A set of 4 thin rubber gaskets that are Need 2. located on the bottom of the spacer to protect the paint. A41517 28-31 Price Ea. $ 12.75

Rumble or Trunk Rubber Bumpers This pair of rubber bumpers is used for either the upper corners of A41502 28-32 Price Set/4 $ 0.70 the rumble or the lower corners of the trunk. Comes in Kit A41485CS. Grab Handle Braces These stamped steel braces go under the for reinforcement where the handles mount. A41518 28-31 Price Pair $ 1.75

A41500RB 28-31 Price Pair $ 24.00

Spec.16 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts Rumble Seat Hinge Kit Rumble Striker Here's all the hardware including If you're converting to a hinges, braces, nuts, bolts, and rumble, you need this type lockwashers to mount the rumble striker plate for the rumble seat. Note: 42 Piece Set. lock. A flat washer may be needed to 7 Piece Set. shim between the hinge bracket and the deck lid. A52500S 28-32 Price Set/7 $ 2.40

A41543S 28-31 Price Set/42 $ 31.95 Trunk Striker If you're using the rumble as a Rumble Hinge Screws trunk, you'll need this This set of 12 screws is used to to latch your lid. attach the rumble hinges to the 10 Piece Set. rumble lid. Screws Included. A41615 28-31 Price Set/10 $ 6.00

A41544MB 28-31 Price Set/12 $ 1.80 Rumble / Trunk Lid Lock This lock unit mounts inside the Trunk Lid Hinges rumble lid. You will need these hinges to '28 - '29 Rumble Lid mount your deck lid as a '28 - '31 Trunk Lid standard lift-up trunk. This

is a quality USA Product SPECIALITY CARS and contains everything that you will need. A52501 28-31 Price Ea. $ 14.25

A41512S 28-31 Price Set/22 $ 45.75 Trunk / Rumble Handle Assembly A702352A or BR Rumble Hinge Pivot Bolts This complete set of special shoulder bolts, square washers, and nuts is used where the rumble lid pivots. A702356E 38 Piece Set. Trunk or Rumble A41543MB 28-31 Price Set/38 $ 6.95 Lid A41604W

Trunk Lid Support A41606 If you’ve ever had a trunk come down on your head, you know how important Rumble Lock this support is to hold up the deck lid. This lock unit mounts inside the rumble lid for the '30-'31's.

A41530A 28-31 Price Ea. $ 16.95

Trunk Lid Support Bolt Kit The bolt kit needed to install the install the A52502 30-34 Price Ea. $ 14.25 A41530A Trunk Lid Support. Rumble & Trunk Handle Lock Washer This special type lock washer slides over the threaded shank and bends over the A41530MB 28-31 Price Set $ 5.45 acorn nut A41606 when it's attached.

A41604W 28-31 Price Ea. $ 0.70

Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Always Open 24/7 Shop Online at www.mikes-afordable.com Spec.17 Mike's "A" FORD-ABLE Parts Rumble & Trunk Handle Acorn Nut Rumble Step Plate Bracket This is the special acorn nut that holds the This cast iron bracket bolts onto the rumble handle in place. bumper brackets for your rumble step plate.

A41606 28-31 Price Ea. $ 1.45 A41572 28-31 Price Set $ 6.95 Cabriolet Rumble Lock Handle For the Cabriolet, Mike has this nice die cast chrome-plated locking handle.

A702352BR 29-31 Price Ea. $ 34.00

Rumble or Trunk Handle Pad This is the rubber pad that fits between the rumble handle and the lid.

1931 Mail Truck A702356E 28-31 Price Ea. $ 0.50

Rumble Step Plate This square step plate was used until 2/29. One goes on the fender and one on the bumper bracket. SPECIALITY CARS SPECIALITY

A41563S 28-29 Price Ea. $ 7.60

Rumble Step Plate This round cast aluminum step plate was used after 2/29. One goes on the fender and one on the bumper bracket.

A41563R 29-31 Owned by Mr. H. Bush of GA. Price Ea. $ 6.75

Rumble Step Plate Pads These rubber pads have a good bead around the outer edge. Use one between the step plate and the fender.

A41563SP 28-29 Square Price Ea. $ 2.25

A41564RP 29-31 Round Price Ea. $ 2.05

Spec.18 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts Closed Car Slant Windshield Gasket This is the special gasket needed Windshields & Parts for the Slant Windshields. This has the special hinge, 2 sides and Show Quality Steel Un-Finished Windshield the bottom gasket you'll need. Frame This top quality frame comes A79551BR 1931 Price Set $ 19.95 with the correct swing arm brackets, frame gaskets, and Closed Car Glass Bedding assembly tools. Right Hand The correct cork / neoprene bedding drive is available upon request. to be used for setting the glass in the Some sanding required. windshield frame. 30-5420U Victoria Price Ea. $ 495.00 A3403X 28-31 Price Roll $ 7.50 Show Qualtiy Concourse Grade Triple Chrome Windshield Frame Closed Car Windshield Bracket This top quality frame comes This bracket is an exact duplicate of with the correct swing arm the '28-'29 originals Includes rivets. brackets, frame gaskets, and assembly tools. Right Hand drive is available upon request. For Judging: Chrome frames are black, painted on the inside A45471A 28-29 Price Ea. $ 9.95 as on the originals.

30-5468C-PC 1931 Slant Windshield Cabriolet 68C Closed Car Windshield Bracket SPECIALITY CARS and 400A This bracket is an exact duplicate of the Price Ea. $ 980.00 '30-'31 originals for all cars except those 30-5410C-VPC 1930 Cabriolet (with Vacuum Wipers) with the Slanted Windshield. Price Ea. $ 930.00 Includes Rivets. 30-5410C-EPC 1930 Cabriolet (with Electric Wipers) Price Ea. $ 930.00 A45471B 30-31 Price Ea. $ 9.95 Closed Car Windshield Frame Screws When you need to replace the glass in Closed Car Windshield Bracket your windshield you should take this A duplicate of the original bracket used on opportunity to replace the screws in the 1931 Slant Windshield. your windshield frame.

#47 28-31 Price Set/8 $ 2.00

Closed Car Windshield Frame Gasket A45471SW 1931 Price Ea. $ 14.95 This gasket goes on the bottom (put in first) and sides of the steel windshield frame. Closed Car Windshield Hinge Gasket Rubber gaskets stretch when you install Made in the USA. This gasket them so wait a day to trim for a tighter is critical to keep out water. It fit. fits between the windshield hinge and the header. The small A79500 26-31 Price Ea. $ 3.50 round edge is exposed to the outside. NOT for Slant Windshield Sedans. Closed Car Windshield Frame Gasket A79550 28-31 Price Ea. $ 3.00 (Aluminum Frame) For the aluminum frame, this is the gasket to use. This does the bottom and both sides but wait a day to trim because of stretch.

A79501 28-31 Price Ea. $ 4.15 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Always Open 24/7 Shop Online at www.mikes-afordable.com Spec.19 Mike's "A" FORD-ABLE Parts Closed Car Windshield Hinge to Header Closed Car Windshield Frame Nut Screws This is the special nut that goes on A complete set of screws to attach the the windshield frame hinges to the header on the Closed Cars. to attach the swing arm to. Need 2.

A30200 28-29 6 1/4-20 x 1/2" round head screws, lock washers & nuts. Price Set $ 1.80 A45475NUT 28-31 Price Ea. $ 1.45

Closed Car Pivot Bolt & Nut This kit has the hardware to hold the A30210 30-31 10 - #10 x 1" round head swing arm to the windshield frame wood screws on both sides. Price Set $ 1.00 A45475S 28-29 Price Set $ 2.70 Closed Car Windshield Hinge Screws - Interior 5 - #10 x 3/4" flat head wood screws attach The '30-'31's Windshields did not use sleeve nuts. The to inside of the windshield to secure the A45475NUT was used for nuts. Windshield hinge to the header.

A45476B 30-31 Price Set $ 0.75 A30220 28-31 Price Set $ 0.50 Closed Car Swing Arm Washers Closed Car Tube Nuts You need one set of these for your car. #6-32". You'll need three tube nuts These are chrome cup-shaped washers per door to mount the window with rubber inserts that go on the swing garnish molding on the Cabriolets. arms. Included in Interior trim kits - See Page Spec. 33. A45477S 28-31 Price Pair $ 2.50 A45484 28-31 - Set of 6 Price Set $ 3.55 Closed Car Swing Arm Nuts #8-32". You'll need ten tube nuts per door These are the chrome-plated nuts that hold

SPECIALITY CARS SPECIALITY to mount the window garnish molding on the swing arms in place when you the Slant Windshields. Included in Interior open the windshield. Trim Kits on Page Spec. 33. A45483T 1931 - Set of 10 Price Set $ 4.50 A45482 28-31 Price Pair $ 6.95 Closed Car Swing Arms These are the arms that pivot to hold Closed Car Sun Visor Bracket the windshield out for fresh air or Used on Victoria's - this nickel plated bracket goes inside the car, close and seal the glass shut - above the windshield. closed cars.

A45463S 28-31 Price Pair $ 9.95

Accessory Style Swing Arms These arms are have notches in them so that the arms A37164 30-31 Price Pair $ 140.00 are sure not to move or slide. Once you use these you'll be hooked.

A45463N 28-31 Price Pair $ 29.95

Spec.20 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts Ford Script Logo Etched on Glass Glass Sets 1928 - 1929 Windshields for cars.

PLEASE NOTE: All glass is clear AS1 safety glass 1/4" thick. A94999A 28-31 Price Ea. $ 16.50 This safety glass works very well and presents no fitting or installation problems. Your glass will be shipped by UPS in 1930 - 1931 Windshields for Cars special boxes that will ensure safe delivery. Most shipments May 1931 thru 1931 all glass optional. will be made within 14 working days of the receipt of your or- der and WILL require additional shipping charges. Shipping charges do apply to glass picked up at our store. A94999C 30-31 Price Ea. $ 16.50 The following codes are used below to describe the glass: W = Windshield D = Door Glass Q = B = Back Glass Where "DD" appears it indicates 2 Door Windows, "QQ" indicates 2 Quarter Windows, ETC.

PLEASE MAKE SURE TO SPECIFY THE EXACT YEAR AND BODY STYLE OF YOUR CAR.

W, DD, B - Cabriolet 68A AG9 1929 Price Set $ 258.50 Shop Online and get a 5% discount!! SPECIALITY CARS W, DD, B - Cabriolet 68B AG10 1930 Price Set $ 258.50

W, DD, B - Cabriolet 68C - Slant Windshield This could cover AG11 30-31 Price Set $ 258.50 the cost of your W, DD, B - Convertible Sedan - 400A AG12 1931 Price Set $ 302.50 shipping!!

W, DD, QQ, B - Victoria Slant Windshield 190A AG18 30-31 Price Set $ 346.50 Just imagine, FREE shipping !!! Individual Glass Pieces

One Piece Windshield - Closed Car - SPECIFY AGW1 28-31 Price Ea. $ 121.00

Door Window - Any Body Style - SPECIFY AGD2 28-31 Price Ea. $ 72.60

Quarter Window - Any Body Style AGQ3 28-31 Price Ea. $ 72.60

Back Window - Any Body Style - SPECIFY AGB5 28-31 Price Ea. $ 58.30

Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Always Open 24/7 Shop Online at www.mikes-afordable.com Spec.21 Mike's "A" FORD-ABLE Parts Electric Wiper Wire Clip Windshield Wipers You will need three of these to hold the wiper motor wire to the header on your Coupe. Electric Wiper Motor This is a universal 6-volt A17616A 28-30 Price Ea. $ 1.50 motor that mounts on the inside of the car. The shaft is sleeved and threaded to Wiper & Dome Light Wire Support hold it in place. Does not This clip was held in place by a bolt that include wiper blade and arm. held the gas tank to the cowl. It 110 Degree Sweep. served as a grommet holder for the wiper Black Housing - With On - Off Switch. - 1928-1931. and or dome lamp wire, and the other part of The 6 Volt shaft can be adapted from the 3 1/4" to 2 1/2" if the clip held the top of the kick panel in place. necessary. Unless you adapt the motor to go thru the windshield Grommet included. 2 Required. frame with an angled hole, you will not be able to open the A14591 28-29 Price Ea. $ 4.30 windshield. A14591GR Grommet Only Price Ea. $ 0.70 For arms and blades for this motor, we suggest A17529A or A17529CHP Arms (below) and A17528 or A17528B (below) Coupe Electric Wiper Wire Supports You will need three of these for the A17508E6 6 Volt - 3 1/4" Shaft Price Ea. $ 41.25 Coupe to hold the wire which goes to the wiper motor plus to A17508E12 12 Volt - 3 1/4" Shaft Price Ea. $ 52.75 support the cowl light wire. Need 3 per Car. Electric Wiper Assembly This is a polished A14593A 28-29 Price Ea. $ 2.25 stainless steel assembly complete with arm and blade. Really nice. Instructions are included for shortening shaft if required. A14593 30-31 Price Ea. $ 2.90 A17508SS6 28-31 6 Volt - 5" Shaft - No On-Off

SPECIALITY CARS SPECIALITY Switch ****** MIKES TIPS ******* Price Ea. $ 55.00 Use only Replacement Blades with A17508SS12 28-31 12 Volt - 5" shaft - No On-Off Replacement Arms and Show Blades with Switch Price Ea. $ 54.95 Show Arms. Wiper Arm (Stainless) Electric Wiper Connection If your wiper motor mounted inside the car, this is the arm to use. These connections are used on all the Originally used from May 1931 thru 1931 on Slant Windshield electric wipers to connect the wire to Cabriolet and 400A. the wiper motor.

A17675 28-30 Price Ea. $ 5.50

Electric Wiper Wire Kit A17565F May 1931 Price Ea. $ 4.40 Replace your dirty, cracked wiper wire with this correct black and blue cloth-covered wire. It runs from the Replacement Electric Wiper Blade These wiper blades fit all Model A Replacement arms. terminal box to the wiper motor and has the flag connector for the terminal box end.

A17500WK 28-31 Price Ea. $ 3.75 A17528 28-29 7-1/4" Blade Price Ea. $ 2.50 A17528B 30-31 8-1/4" Blade Price Ea. $ 2.75

Spec.22 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts Show Electric (Flat) Tension Arm Wiper Motor Felt This exact reproduction arm has been heat treated and cadmium This felt fits most plated. Includes the Special Square Head Tension Bolt , Knurled motors in use Nut and Cotter Pin. Not Stamped with Trico - 6 1/2" Cad. today. It goes between wiper motor and the windshield frame on all closed cars. 3"x 5/8.

A17565A 1928 - June 1929 Price Ea. $ 21.95 A17618 28-30 Price Ea. $ 1.75

Show Quality Electric Blades Manifold Hole Plug This is an exact duplicate of the original TRICO embossed blade This is the special slotted pipe plug which was used for the cars with the original electric motor. 8 1/4" Nickel Blade on the side of the block near the oil pump to let you with cotter hole - single ply rubber. Use A17565A Arm. see if your oil pump was working. This is also used for the valve fitting on the inlet manifold to plug the hole. To hold in the oil pump while changing the pan gaskets - use A6701 Page Gen. 118. This is also used to plug the intake manifold when an A17506B 1928 - April 1929 - Closed Cars electric wiper is used. Price Ea. $ 16.25 A6621 28-31 Price Ea. $ 0.65

8 1/4" Nickel Plated, Contoured Top, Multi-Ply Blade with Cotter Electric and Vacuum Tandem Wiper Kit Pin Hole. Use A17565A Arm. This kit allows you to add on a wiper for the passenger side so they can see, too! It will adapt to A17508 6V or 12 V Motor Be- fore drilling any holes, make sure the distance between the Motor

Shaft and the Pivot Shaft is EQUAL to the length of the Link Rod SPECIALITY CARS A17506D April 1929 - June 1930 Assembled to the Wiper Arm. Price Ea. $ 16.50

8 1/4" Black, Multi Ply, Universal Use Blade with Cotter Pin Hole. Use A17565A Arm.

A17506E Price Ea. $ 16.50 A17574 28-31 Price Set $ 29.15 Wiper Mounting Boots These rubber boots slipped onto the There are not any decent New Vacuum Wiper mounting ears of the original electric Motors available. We can rebuild a good core. wiper motors.

A17595AR 1928 Closed end Vacuum Wiper Motor Control Price Ea. $ 6.95 Here's the on/off control for the outside mounted wiper motor. This passes through the windshield frame. A17534 28-31 Price Ea. $ 3.95 A17595B 28-30 Open End Price Ea. $ 2.85 Vacuum Wiper Mounting Screws Here are the screws needed to mount the Wiper Boot Plates vacuum wiper motor. This plate goes on top of the wiper mounting boot on the later closed cars. A17500CMB 30-31 Closed car Price Pair. $ 1.10

A17595P 29-30 Price Pair $ 3.40

Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Always Open 24/7 Shop Online at www.mikes-afordable.com Spec.23 Mike's "A" FORD-ABLE Parts Show Vacuum Arm Closed Car Manual Control Lever 6 3/4" Chrome, Clip Type Arm used from June 1930 thru 1931 on This is a plated control lever. Deluxe Open Cars and on 1930 - 1931 Cabriolet (68B).

A17565C 30-31 Price Ea. $ 16.00 A17575 28-30 Nickel Plated Price Ea. $ 28.90 8 1/4" Chrome, Clip Type Arm used from October 1930 thru 1931 A17575B 28-30 Black on Victorias and in 1931 for Deluxe Slant Windshield Fordors. Price Ea. $ 27.50

Closed Car On-Off Lever This is a plated on/off lever for the A17565E 30-31 Price Ea. $ 16.00 closed car.

Show Vacuum Wiper Blade 8 1/4" Black, Single Rivet, Multi-Ply Blade with Clip for April A17580 28-30 Nickel Plated 1929 thru 1931 Closed Cars and June 1930 - 1931 for Standard Price Ea. $ 26.00 Open Cars & 1931 Slant Windshield Fordors. Trico Vacuum Wiper Bowl Gaskets If you need only the bowl gaskets for your Trico motor, Mike's got them. A17506F 1929 - 1931 Price Ea. $ 16.50

8 1/4" Chrome blade with single arm rivet clip, five ply rubber. July 30 - End 31 - Deluxe open cars with Vacuum Wipers, A17508G 29-31 Price Pair $ 2.35 '30-'31 Victoria & '30-'31 Cabriolet. Trico Vacuum Wiper Motor Tag If your Trico embossed tag has been painted or marred, replace A17506G 29-31 Price Ea. $ 16.50 it with this new one.

8 1/4" Black, Two Rivet, Multiply Blade with Clip for 1931 SPECIALITY CARS SPECIALITY Closed Cars and Standard Open Cars. A17508T Price Ea. $ 3.50

Chrome Vacuum Wiper Knob Replace your worn knob with this new one. A17506H 1931 Price Ea. $ 16.50

8 1/4" Chrome, Two Rivet, Multi-Ply Blade with Clip for 1931 Deluxe Open and Closed Cars. A17513 28-31 Price Ea. $ 1.75

Trico Vaccum Wiper Knob A17506I 1931 Price Ea. $ 16.50 If you want the knob with“ TRICO on it, this chrome-plated knob is for you. Closed Car Blade Arm Support These are the same design but the ’28 model is shorter. A17513D 29-31 Price Ea. $ 3.50

A17564A 1928 Nickel Plated Vacuum Wiper Hose Price Ea. $ 26.00 Six feet of the small diameter hose for the wiper. Rubber. Used on all cabs with wipers.

A17564B 29-30 Nickel Plated A17520 28-31 6 Ft. Price Ea. $ 26.00 Price Ea. $ 2.25

Spec.24 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts Fabric Vacuum Wiper Hose Wiper Motor Bracket For the show car, Mike has this simulated Used only on the 400A to attach the fabric covered wiper hose. Used on all wiper motor to the windshield frame. cabs with wipers. A17520OR 30-31 Price Ea. $ 6.00 A17679 30-31 Price Ea. $ 17.50

Vacuum Wiper Hose Header Clips This set of three clips hold the wiper hose in place under the windshield hinge on the Coupe. The hinge screws also secure these clips. Sold as a set of three.

A17616 30-31 Price Set/3 $ 2.95

Manifold Vacuum Line Connector This is the brass connector that screws into the intake manifold that you connect the vacuum line to. Manifold Hole size - 1/8 - 27 Pipe Thread. A17540 29-31 Price Ea. $ 1.10

Manifold Vacuum Line SPECIALITY CARS Mike has the steel vacuum line with brass fittings included. This goes from the intake manifold up to the firewall.

A17543A 28-31 Price Ea. $ 3.45

Manifold Vacuum Line Fittings These are new quality vacuum line fittings. There are included with a new Manifold This is the car that started Mike's "A" Ford-able Parts. You Vacuum Line A17543A or A17522. can read all about it on our "about Mike's" section on our website. This car was a ground up restoration in 1991 for Mr. A17543F 28-31 Price Ea. $ 0.45 M. Buice. The car has changed hands and won awards and is now in the George Bugg Collection. Firewall Vacuum Line Connector This is the double female brass connector that attaches to the firewall for both inside and outside vacuum lines to connect. Includes 1/2-20 Cad. Nut. A17541 29-31 Price Ea. $ 3.25

Inside Vacuum Line (Brass Fittings Included) This is the steel vacuum line that goes from the firewall under the gas tank and up the stanchion on Coupes.

A17522 29-31 36" long Price Ea. $ 4.10

Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Always Open 24/7 Shop Online at www.mikes-afordable.com Spec.25 Mike's "A" FORD-ABLE Parts Prop Knobs These are authentic prop knobs to hold the Specialty Car Top Parts top iron on the car. The Cabriolet prop knob is 1 7/8" diameter with a polished Landau Spacers stainless steel cover. This is a good quality set of Bakelite spacers and 4 discs already covered A37708CAB 29-31 1 3/4" Knob 7/16" - 14 hex nut with the top material. 6 Pieces. Price Ea. $ 8.45

Dress Plate Seal A52272/74CAB 28 - 30 Cabriolet - 68A & B The dress plate of the upper folding post Price Set/4 $ 54.75 on the Cabriolets use this thin piece of A52272/74-68C 1931 Cabriolet - 68C rubber. Price Set $ 54.75

Landau Spacer A37319 29-30 68A, 68B Price Ea. $ 6.00 Use this rubber spacer between the landau A37320 1931 68C Price Ea. $ 6.00 iron and the top. Works on the 68A and 68B Cabriolets. Header to Body Bracket This chrome bracket fastens to the A52273 29-30 Price Ea. $ 7.50 wood header for the top to attach to the body. Landau Spacer Cap Cabriolets 68A & 68B. Use this steel cap over the rubber spacer A52273. Works on the 68A and 68B A37722 29-30 Price Ea. $ 59.50 Cabriolets. Landau Lower Bracket A Cast bronze bracket that attaches A52273C 29-30 Price Ea. $ 7.50 to the belt area of the body and provides the male threaded stud for the lower landau iron to attach. Studs Works on the 68A and 68B Cabriolets. A52270S SPECIALITY CARS SPECIALITY A37800L 29-30 Left Price Ea. $ 117.00 Prop Nuts A37800R 29-30 Right Price Ea. $ 117.00 A37708 Landau Arms Upper Landau Bracket A Cast bronze bracket that attaches Studs to the middle bow just behind the A52270S door opening & provides the male threaded stud for the upper landau iron to attach to. Works on the 68A Landau Spacers Prop Nuts and 68B Cabriolets. A52272/74 A37708 A37802L 29-30 Left Price Ea. $ 140.00 A37802R 29-30 Right Price Ea. $ 140.00 Top Irons For Cabriolet These are the irons for '30-'31 68B Triple Hinge and 68C Cabriolets, Slant Windshields A Cast bronze hinge attaches to the and Straight Windshields. Landau belt rail and provides an anchor and Irons are not included. pivot point for the rear and middle bows. Works on the 68A and 68B Cabriolets. A43501-68B 1930 68B - Straight Windshield Price Set $ 904.05 A37804L 29-30 Left Price Ea. $ 75.00 A43501-68C 1931 68C - Slant Windshield A37804R 29-30 Right Price Ea. $ 75.00 Price Set $ 903.65

Spec.26 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts Center Bow Brace Top Roof Molding - Rubber Insert - Style # 9 A Cast bronze brace that screws to the bottom of the center bow This is the rubber insert for A473016. and serves as a pivot point. Works on the 68A and 68B This is a 19 feet long, 3/16" wide, half Cabriolets. round rubber molding.

A37805 29-30 Price Ea. $ 62.00 A473019 30-31 Price Roll $ 9.50

Rear Bow Brace Top Roof Front Molding - Style # 8 A Cast bronze brace the screws to the This is the two-piece steel molding that is used on the rear of bottom of the rear bow and serves as '29-'29 Taxi. a pivot point. Works on the 68A and 68B Cabriolets.

A37806 29-30 Price Ea. $ 62.00

Hinge Pivot Pin A473018 28-31 6 feet long - need 2 pieces A steel pin that acts as a hinge pin Price Set/2 $ 18.45 where the rear and center top bows pivot at the belt rail. Works on the Welt Tip 68A and 68B Cabriolets. This is the style welt type used on the '30-'31 Victoria's. SPECIALITY CARS A37807 29-30 Price Ea. $ 8.50

PLEASE NOTE: MOLDING AND GUTTERS ARE SHIPPED IN PVC TUBING. UPS DOES A47303B 30-31 Price Ea. $ 1.25 CHARGE AN ADDITIONAL HANDLING FEE.

Top Roof Molding - Style # 1 This style of aluminum molding goes on the front over the sun visor for the '30-'31 Victoria 190A.

A473011 5 Ft. Piece 5/8" wide Price Ea. $ 12.60

Top Roof Molding - Style # 4 This is the style of molding used on the front of the '31 Slant Windshield Victoria's 190A After February 1931.

A473014 1931 5 Ft. Piece 3/4" wide Price Ea. $ 12.40

Top Roof Molding - Style # 6 This is an aluminum molding which is nailed in the center and then rubber molding (A473019) is inserted into it to cover the nails. Used from '30-'31 Victoria's 190A. 6' Long, order 3 for Victoria's.

A473016 30-31 Price Ea. $ 19.50

Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Always Open 24/7 Shop Online at www.mikes-afordable.com Spec.27 Mike's "A" FORD-ABLE Parts

WINDOW SHADES & ASSIST CLOSED STRAPS HANDLES & PARTS

Assist Straps for Slant Windshield Fordors & Scroll Outside Door Handles Victorias. The Cabriolets, Victoria's and 400A's, Brackets and screws Included. used this style handle. All Scroll Handles are foreign made and are very good quality. RFP105VGRE 30-31 Green Price Pair $ 62.00 RFP105VGRY 30-31 Gray Price Pair $ 62.00 RFP105VTAN 30-31 Tan Price Pair $ 62.00 A702350C 28-29 R.Front/L.Rear RFP105VTPE 30-31 Taupe Price Pair $ 62.00 Price Ea. $ 25.50 A702351C 28-29 L.Front/R. Rear Assist Strap Brackets Price Ea. $ 25.50 Mike also has these new brackets A702350D 30-31 R.Front/L. Rear for the assist strap. The horizontal was used Price Ea. $ 25.50 on '28-'31 Deluxe Fordors and the vertical A702351D 30-31 L. Front/R. Rear was used on the late ’31s. Price Ea. $ 25.50

RFP105VB 30-31 Slant Windshield Victorias Scroll Locking Door Handle Price Pair $ 8.50 This scroll-style locking handle was used on the Cabriolets, Victoria's, and the 400A. Window Shade Brackets Keyed locks were used on the right side Only. These chrome brackets are used to Comes with 2 Keys. mount your window shades.

A702350DL 30-31 Price Ea. $ 34.95 A48301 28-31 Price Pair $ 15.75 Wood Door Handle Screws SPECIALITY CARS SPECIALITY Window Shades You'll need this kit if you have a Fordor Mike has a variety of shades or other car which takes wood screws to available for the Model A Closed attach the outside handles. Car. Tan in color, they are ready Enough screws for 2 doors - need 2 sets for Fordors. to mount on your brackets. Quarter window. A702780MBW 28-31 Price Set/4 $ 1.50

Door Handle Pads These flat rubber pads go between your outside handle and the car to prevent A4830020 Victoria side window - 20" scratches and rattles. Price Ea. $ 25.75 A702356B 1929 Cabriolet A4830026 Victoria Rear Window Slant Price Pair $ 0.85 Windshield - 26" A702356D 30-31 Cabriolet Price Ea. $ 25.75 Price Pair $ 1.00 A702356E 28-31 Cabriolet Rumble Price Ea. $ 0.50 A702356F 30-31 400A & Victoria Price Set/4 $ 1.60

Spec.28 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts Door Handle Cup And Spring Twist Style Door & Window Handle You'll need one set per handle of this Escutcheon special cup washer and spring. The A plain round escutcheon with a spring is crimped onto the outside grooved ring, used with B702400C. door handles under the escutcheon. It was also used for the window Not needed when purchasing new handles. riser handles on those cars. Works best on original handles. Chrome 1-3/8" diam. x 1/2". 2 Piece Set - contains 1 spring & 1 cup. Late '30-'31 Cabriolet '30-'31 Victoria A702350R 28-31 Price Set/2 $ 1.55 1931 400A. A48139C 28-31 Price Ea. $ 4.80 Door Lock Cylinder If you have a separate lock cylinder Door & Window Riser Pins under a regular door handle, you will A set of four pins, 1/8" diam. x 5/8" long, use this. for the inside window Riser. Comes with 2 keys.

A46250P Price Set/4 $ 0.65

A702350L 28-31 Price Ea. $ 12.40 Inside Door Handle (Lift up Style) This square chrome-plated lift-up style inside Lock Knob door handle was used on: Most '29 - '30 Cabriolets used

1930 - Mid '30 Cabriolets SPECIALITY CARS this twiststyle lock knob. 6/32 x 1/2" A702400A 30-31 Square Top Price Ea. $ 8.45 A46192B 28-31 need 3 Price Ea. $ 4.65 The Triangle Lift up style was used on: Door Lock Arms 1929 Cabriolets This is the lock arm, that is usually missing or broken. It is located on the Order A702400SN Sleeve Nut. backside of all lock levers on the Order A46270 Escutcheon. 1929 - 1930 Cabriolet. A702400B 1929 Triangle Top Price Ea. $ 8.45 RAR256 29-30 Price Ea. $ 3.95 Door Handle Sleeve Nuts Latch Lock Studs These threaded sleeve nuts were used These studs fit1929 - 1930 Cabriolet. to hold the lift up style door handles They fit into the lock lever mounts on the shaft. 1 x 5/16 - 24 Nut & l/w. RAR256.

A702400SN 28-31 Price Ea. $ 1.45

RAR259 29-30 Price Ea. $ 26.95 Deluxe Inside Door Handle Escutcheon This is a deluxe style inside door Inside Door Handle (Twist Style) handle escutcheon. Includes washer This is the "twist" style inside door was used on: handle used on: 1929 - Mid 1930 Cabriolet Late '30-'31 Cabriolet '30-'31 Victoria A46270 Price Ea. $ 3.75 1931 400A. Order A48139C Escutcheon. Order A46250P to secure.

B702400C 30-31 Price Ea. $ 10.20 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Always Open 24/7 Shop Online at www.mikes-afordable.com Spec.29 Mike's "A" FORD-ABLE Parts Door Pull Handle Upholstery Clip This door pull handle comes These clips are made to hold the upholstery complete with hardware to to the door. attach to the window molding on the Cabriolets to help close the door. A46126 28-31 Price Set/10 $ 2.50

A61062CR 29-31 Price Ea. $ 8.65 Front Door Weather Seal and Retainer Attach this metal channel with rubber strip installed to the wooden Window Riser (Scroll Type) door frame at the bottom of the window opening to help keep rain The deluxe closed cars used this and dirt from going inside of your door. 23" Long - Need 2. scroll window riser used on: Used on: 1929 Cabriolets 1929 Cabriolet 68A Order the A46250P to secure the handle. '28-'29 Town Car 140A Order A48139B Escutcheon.

A702780B 28-31 Price Ea. $ 9.35 A48162 28-31 Price Ea. $ 13.50 Spring Loaded Window Riser Escutcheon A replacement style that can be used in place of Rear Door Weather Seal and Retainer the A48139AR or the A48139B Escutcheons. Attach this metal channel with rubber strip installed to the wooded Brushed chrome finish. I.S. is 11/16". Can be door frame at the bottom of the window opening to help keep rain colapsed to a thickness of 15/32" or out as and dirt from going inside of you door. 21 1/8" Long - Need 2. much as 5/8". Used on: '28-'29 Town Car 140A

A48139RE 28-31 Price Ea. $ 4.00

Deluxe Window Riser Escutcheon This is a chrome plated deluxe style A48163 28-31 Price Ea. $ 13.50 escutcheon which fits between the window riser handle and the upholstery. Header Strips Used on: Made in the USA. Mike has these pairs of header strips which

SPECIALITY CARS SPECIALITY 1929 - Mid '30 Cabriolet screw into the frame above the door. The Victoria Sets may re- quire trimming on the front and back edges for a tidy fit. A48139B 28-31 Price Ea. $ 2.95

Window Riser (Deluxe) This style window riser was used on: A45890C 30-31 Leatherback Victoria - Left 1930 - 31 Cabriolet Price Ea. $ 115.00 1930 - 31 Victoria A45890D 30-31 Leatherback Victoria - Right 1931 A400 Price Ea. $ 115.00 Order A46250P to secure the handle. Order the A48139C Escutcheon.

A702780C 30-31 Price Ea. $ 9.35 A45890E 30-31 Steelback Victoria - Left Price Ea. $ 63.00 A45890F 30-31 Steelback Victoria - Right Escutcheon Spring Price Ea. $ 63.00 This cone-shaped spring fits behind the upholstery panel against the escutcheons to keep everything Bottom Door Seal tight. This rubber seal goes on the bottom of the door and is held in place by the same A48284 28-31 Price Ea. $ 0.75 clips that hold the door panel on. 1 Roll is enough for all Cars.

A19009 28-31 Price Roll $ 6.25

Spec.30 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts Tube Nuts Victoria Hinges - Hinge to Cowl #6-32". You'll need three tube nuts These cast bronze hinges are for the Victoria. per door to mount the window garnish Only the hinge pin hole has been machined. molding on the Cabriolets. You will need to drill and tap the These are included in the trim kits. mounting holes. A45484 Set of 6 Price Set $ 3.55

#8-32". You'll need ten of these tube A46300SWC 1931 Price Ea. $ 50.00 nuts per door to mount the window garnish molding on the Slant Windshields. Victoria Hinges - Hinge to Door These are included in the trim kits. These cast bronze hinges are for the Victoria. Only the hinge pin hole has been machined. A45483T Set of 10 Price Set $ 4.50 You will need to drill and tap the mounting holes. Door Hinge To Door Screws This set of nine screws is needed to attach the door hinge to the door. A46300SWD 1931 Price Ea. $ 69.00 9 x 5/16-24 x 1/2". Will not work on '28-'29 Closed Cab Pickups - some Closed Car Door Hinge Pins bodies require cup washers. These round headed hinge pins are #109 28-31 Price Set/9 $ 2.45 authentic for the Closed Car Only. Not for the Slant Windshield - Use A45335B Door Hinge To Body Post Screws This set of three screws is needed to attach

A46335 28-31 Standard - .233 / .236 SPECIALITY CARS the door hinge to the body. Price Ea. $ 0.45 6 Piece Set. 3 Screws and 3 A46335OS 28-31 Oversized - .247 / .250 Washers. Price Ea. $ 0.45

#109B 28-31 Price Set/6 $ 1.75 Closed Car Stainless Door Hinge Pin This stainless steel hinge pin is knurled with a Washers Only polished head. A special countersunk washer used when mounting the floorboards. These washers are also used on some of the door hinges. A46335SS 28-31 Price Ea. $ 2.55 #109W 28-31 Price Ea. $ 0.12 Door Hinge Pin ( Slant Windshield) Hinge Pin Remover If you've got the Slant Windshield, you'll need these authentic This helpful tool, uses three graduating hinge pins. hardened push pins to push your old hinge pins up and out of the hinge. As you tighten the bolt it will push the dowel and the old pin out. Set comes complete with 3 different A45335B 30-31 Price Ea. $ 0.90 length push pins and complete instructions. NOT to be used on Slant Windshield Cars. This item is NOT Refundable!! T46335HR 28-31 Price Ea. $ 28.75 Female Dovetail Assembly Mike has this complete dovetail assembly with the metal clip and WARNING!!! rubber already in place. Used on: If your dowel pins start bending DO NOT go any further '29 & '30 Cabriolet, with this tool. These dowels are made from a hardened '28 - '29 Town Car steel but NOT case hardened. The manufacturer has issued a warning that if a case hardened or heat treated A61412A 28-31 Price Ea. $ 11.50 steel was used, it could very well explode or splinter under such pressure, and possibly do bodily harm. I suggest trying penetrating oil, but if that doesn't work, then take a fine drill bit and try drilling at least halfway through the pin. Then use the removing tool. Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Always Open 24/7 Shop Online at www.mikes-afordable.com Spec.31 Mike's "A" FORD-ABLE Parts Female Dovetail Rubber Bezel The internal rubber in the A61412A This bezel clamps onto the door panel Dovetail. 2 In each dovetail. where the panel is notched for the striker.

A156412BUM 28-31 Price Ea. $ 0.75 A48140 28-31 Price Pair $ 2.50

Female Dovetail Assembly Kick Panel Retaining Clip For the Slant Windshield cars, Mike These clips hold the bottom of the has this complete dovetail assembly. kick panel snug. For 1931 Victoria's, 400A's & Cabriolet's 68C.

A61412C 1931 Price Ea. $ 37.50 A40555CL 28-31 Price Pair $ 5.75

Dovetail Wedge And Spring Door Check Post Bumper For the Slant Windshield cars. You will This pair will do both doors. The square need two sets per dovetail. rubber mounts in the door post for the One Guide and spring per set. door check bumper to butt against.

A61413SW 1931 Price Set/2 $ 5.60 A702828BU 28-31 Price Pair $ 3.95

6-Hole Male Dovetail Door Check Arm Brackets This chrome-plated 6-hole male Top and bottom brackets are spot dovetail was used on some welded to the door post to receive the Cabriolets. arm (A702828CL). Order 1 set per door.

A61419A 28-31 Price Ea. $ 13.50 A702828BRKT 28-31 Price Set/2 $ 4.90

Closed Car Door Handle Spring Door Check Arm Brackets SPECIALITY CARS SPECIALITY This style spring is used with the two style Top and bottom brackets that screwed to the door opener. 68-C Cabriolet, door post for the door check arms to attach to. '30-'31 Victoria's and the 400A. Used on late 1928 thru 1931 Straight Windshield Fordors.

A46125L 30-31 Price Ea. $ 4.50 RAR231 28-31 Price Pair $ 9.25

Striker For Slant Windshield Door Check Arm And Rubber Bumper This two stage striker plate, including screws, This steel arm door check was used on all the Model A's was used on: that didn't have the rubber strap 1929 Cabriolet 68A style footman's loop.

A702340 29-31 Price Ea. $ 8.70 A702828CL 29-31 Front door on closed cars Price Pair $ 6.15 Striker Plate Screws The hardware to mount A702340. Door Check Bumper Two #14 x 1 flat head wood screws This style of rubber bumper was used and washers per set. with the steel arm door checks. It attached inside the door. A48545 29-31 Price Set/4 $ 0.40 A702828R 29-31 Price Pair $ 2.05

Spec.32 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts Cabriolet Quarter - Upper Windlace Metal Glass Channel Retainer Glass channels for the Late 1931 Victoria ONLY. This is a pair of polished mouldings located along the vertical Right and Left Side. edge of the door window. A piece of windlace is installed into this molding to seal the door window to the body.

A45962C 1931 Right Price Ea. $ 29.50

A48167 29-30 68A & 68B Price Pair $ 75.00 A45963C 1931 Left Price Ea. $ 29.50 A48168 1931 68C Price Pair $ 75.00 Glass Setting Rubber Front Door Window Channel Kits This U-shaped rubber is used to mount These kits include all of the necessary the rear and quarter windows in the moulded channels with clips attached, frame. upper window sponge seals, "T" shaped For Glass See Page 35. anti-rattle rubber (when required), lower A19003C Quarter and rear windows glass cushion bumpers and adhesive. Price Set $ 10.25 One kit does both front doors. A19003R Rear window only Price Ea. $ 4.95 A45983SWV 1931 Victoria Price Kit $ 60.50 Side Glass Setting Rubber This has a lip for the Cabriolets - 6' Long.

Rear Door Window Channel Kits SPECIALITY CARS These kits include all of the necessary moulded channels with clips attached, upper window sponge seals, "T" shaped anti-rattle rubber (when required), lower glass cushion bumpers and adhe- sive. One kit does both Rear Quarter Windows. A48138 28-31 Price Ea. $ 9.95

Interior Trim Screws These sets of screws are exactly what is needed for each body style and year indicated. A56791B 1931 Victoria 1/4 Window Price Kit $ 77.00 #1026 28-29 Cabriolet Price Set $ 16.00 Cabriolet Door Felt Channel #1013 1930 Cabriolet straight windshield This is a 20" long, felt lined channel for the 68A & 68B Price Set $ 16.00 Cabriolets. Used from 1929 thru early 1930. Don't forget to #1014 1931 Cabriolet slant windshield order you clips below. Price Set $ 16.00 #1018 30-31 Victoria Price Set $ 16.00

A45983C 1929 - Early 30 Price Ea. $ 7.65 #1019 1931 400A Price Set $ 16.00

Felt Glass Channel Clip Robertson Interior Trim Screw Kits This clip goes at the bottom of each For all Canadian built cars. felt glass-channel to hold them in place. 2 Clips. CR12 30-31 Cabriolet Price Set $ 24.50

A45983CL Price Pair $ 1.50 CR15 1931 Victoria Price Set $ 27.50

Glass Bumper This rubber bumper mounts on the ledge inside the door for the side window glass channel to rest on.

A48141 28-31 Price Ea. $ 0.90 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Always Open 24/7 Shop Online at www.mikes-afordable.com Spec.33 Mike's "A" FORD-ABLE Parts Door Bumpers Mike has complete sets of the rubber, metal, and clips needed to change out Insulation Kits the door bumpers for the following models. The rubber may need trimming. These are the best quality available. Firewall & Complete Car Insulation If you tour in the heat of the summer 1929 Cabriolet - 12 Piece Set (and who doesn't?), you'll want one A702610AS 1929 Price Set $ 11.25 of these insulators to keep engine heat out. It mounts inside the firewall and 1930-1931 Cabriolet. 12 piece set. is molded to look like the firewall. A702610HS 30-31 Price Set $ 9.85 A18572A 28-29 1931 Slant Windshield Cabriolet. 14 piece set. Price Ea. $ 120.00 A702610TS 1931 Price Set $ 13.70 A18572B 1930 - 1931 Price Ea. $ 120.00 1930-1931 Victoria, 400A 12 piece set. A18572C 1931 - Indented A702610VS 30-31 Price Set $ 14.95 Price Ea. $ 120.00

Door Bumper Clip Install this clip, in the same manner as above, Complete Car Insulation but you will need two clips on each side of A multi - stage, automotive sound damping and insulation system the door post. Includes one #8 x 7/8" Flat for your Model A. Reduce engine and road noise, vibration and head Wood Screw. Uses 8 clips. heat. This is the stuff that Henry Ford left out of original produc- 1928 - Early 1931 Cabriolet tion and it makes all the difference in driving comfort! Should be 1930 - Early 1931 Victoria able to install in approx. 2 hours. Complete instructions included. A46458 28-31 Price Ea. $ 4.25 These are shipped directly from the manufacturer to you.

1929 Cabriolet Upper Door Bumper A18825K Complete Kit Price Set $ 239.00 This square upper door bumper, which A18825A Floor Kit Price Set $ 89.00 mounts in the jam above the door catch A18825B Trunk Kit Price Set $ 49.00 is not included in any of the door bumper A18825C Body Panel Price Set $ 59.00 sets. Used on : SPECIALITY CARS SPECIALITY A18825D Cowl Kit Price Set $ 29.00 1929 - 30 Cabriolet 68A & B A18801 Door Damper Kit Price Set $ 29.00 A701610-68 29-30 Price Ea. $ 2.75 1930 - 1931 Cabriolet Window Regulator A18870 Complete Kit Price Set $ 239.00 This window regulator is the A18870A Floor Kit Price Set $ 89.00 four-hole type used on the A18870B Trunk Kit Price Set $ 49.00 Cabriolet. A18870C Body Panel Kit Price Set $ 59.00 A18870D Cowl Kit Price Set $ 29.00 A18801 Door Damper Kit Price Set $ 29.00

A48105B 28-31 Passenger Side 1930 - 1931 Victoria Price Ea. $ 40.65 A18865 Complete Kit Price Set $ 369.00 A48106B 28-31 Driver Side A18865A Floor Kit Price Set $ 119.00 Price Ea. $ 40.65 A18865B Body Panel Kit Price Set $ 89.00 A18865C Cowl Kit Price Set $ 29.00 A18865D Roof Kit Price Set $ 119.00 A18801 Door Damper Kit Price Set $ 29.00

Spec.34 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts

Floorboards & Parts

For more floorboard related items see page Gen. 93 of our general section.

Floorboard Pedal Plates This is the pedal plate specifically made for the 400A, 68C Cabriolet, Victoria and Deluxe Phaetons. (Drop Steering Column). Order the A35123FP as well.

A35123BR 1931 Price Set $ 52.00

Floorboard Plate Mounting Screws Use this set to attach the pedal plates (A35122AR, A35122S or A35123BR). 2 x 12/24 x 1/2" Machine Screws with #10 Oval Head

1 #6 x 3/4" Oval Head Wood Screw SPECIALITY CARS and 3 Cup Washers.

A35123MB 28-31 Price Set/6 $ 0.95

Floorboard Pedal Plate Felt Pad This heavy felt pad fits tightly around the steering column and the pedals when used with the A35122S metal plate.

A35123FP 28-31 Price Ea. $ 2.35

Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Always Open 24/7 Shop Online at www.mikes-afordable.com Spec.35 Mike's "A" FORD-ABLE Parts

Cowl Welt This roll of 1/8" black beading is used when you mount your gas tank. GAS TANK '28-'29 Across back edge of tank and down sides of cowl. Specifications: '30-'31 Around back edge and sides. Steel thickness: .049" to .051" (terne plated) Paint lower body color. Capacity: 28-29, 10 gal.; 30-31, 11 gal. A3405CW 28-31 10 Ft. Roll Price Roll $ 3.75

Gas Tank Anti-Squeak Welt The following new parts are required to This 1/16" x 12 ft. woven fabric welt is used as a buffer around the gas tank to complete a restoration of your Gas Tank. eliminate rattles. The early models use it This is only a guide - do not assume that this all the way around the tank; the later models is all that is needed, all other parts need to be on the front and back edges. thoroughly checked. A9006 28-31 Price Roll $ 3.60

1. Gas Tank Sealer - AGTS Gas Tank Filler Screen 2. Fuel Tank Welt Anti-Squeak - A9006 This tab-style screen sits in the 3. Gas Tank Filler Screen - A9020 neck of the gas tank. Does not fit early threaded style. See page 441 of Service 4. Fuel Shut Off - A9189A or B Bulletins for correct installation. 5. Fuel Shut Off Filter - A9193T or A9194B These will not work with tool - T9021 - below. 6. Filter in Gas Bowl - A9156 A9020 28-31 Price Ea. $ 10.45 7. Gas Lines - A9230A, B, A9230AV, BV, A9240B, C 8. Gas Gauge Tool - T9300 Gas Tank Filler Screen Tool 9. Gas Gauge Rebuilding Kit - A9320S A great tool to help with the installation or removal of the Filler Screen (A9020). Place 10. Gas Gauge Nut - A9326 - Inner - A9330 - Outer the tool in the filler neck notches and use a 11. Intake and Exhaust Manifold Gaskets - A9433F, socket wrench and extension. A9433, A9433C, A9433C2 For original Screens Only.

SPECIALITY CARS SPECIALITY 12. Carb Kit - A9595Z, B or T T9021 28-31 Price Ea. $ 3.75 13. Grose Jet - A9564GJZ, GJT or B9564Z 14. Choke Rod Assembly - A9700B or C Gas Tank Protector Lay this lined naugahyde on top of 15. Grommet Set - A9066A or A9715/17 the tank when filling to protect your 16. Control Rods - A9740S finish. 17. Sediment Bowl - A9155 18. Sediment Bowl Gaskets - A9173 or N A9030P 28-31 Price Ea. $ 21.95

Gas Tank Sealer Gas Tank Speedo Cable Grommet Extend the life of your old tank with this semi- This elongated grommet will help save elastic sealant. Seals pin holes, covers rust flakes, your cable that runs under the gas tank not affected by alcohol. Cannot be shipped by in the tunnel to the speedo. air. For best results, have the gas tank chemically cleaned and rust free before using this sealer. A9066R 28-29 Price Ea. $ 3.45 AGTS 28-31 Price Quart $ 25.00 Firewall to Gas Tank Screws Gas Tank Etching This set of screws has all the parts needed Remove light rust inside of your gas tank to attach the gas tank to the firewall. before you put in the AGTS Gas Tank Paint lower body color. Sealer. This will leave a gray phosphate 10 12-24 x 19/32 Pan Head Screw & coating. 16 Oz. Lockwasher.

#46 30-31 Price Set $ 2.95 A9002E 28-31 Price Each $ 11.75 Spec.36 Give us a call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts

Firewall to Gas Tank Bolts Show Quality Gas Cap This set of bolts is what you’ll need to Vented stainless steel gas cap for '30-'31. This is the best quality attach the gas tank to the firewall. available. It's a copy of the original Eaton style cap. These really 8 x 3/8 Tall Headed 1/4 - 20 5/8" Bolts, fit. Includes the correct gasket. Lockwashers & 1/2" Nuts. 2 sets needed for the Fordor and Cabriolet. Paint lower body color. #46A 28-29 Price Set/8 $ 4.10

Gas Tank To Belt Rail Bolts This set of bolts is what you’ll need to attach the gas tank to the cowl. Bolts A9030C 30-31 Price Ea. $ 19.95 secure the back edge of the tank to the dash rail support. Gas Cap Gaskets Treated leather gaskets.

#46B 28-29 1/4-20 x 1/2" Bolts, LW's & Hex Nuts Price Set/24 $ 3.85 A9035A 28-29 Price Ea. $ 0.65

#46C Early 1930 12 x 1/4" - 20 3/4" Bolts & l.w. SPECIALITY CARS Price Set/36 $ 3.85 A9035 30-31 Price Ea. $ 0.95

Sediment Bowl Repair Kit Rebuild kit to improve the functioning of original cast iron sediment bulb on the firewall. #46D Mid 1930 Size changed to 5/16-24 x 25/32" Instructions included. Bolts, LW's and Nuts. Price Set/36 $ 3.85

A9155RK 28-31 Price Kit/3 $ 4.75

Glass Sediment Bowl Micro Filter #46E Late 1930 to End - Improve the efficiency with this filter The same 5/16-24 x 25/32" Bolts were used, except the nuts which fits inside the glass bowl. were placed inside a cage. Unfortunately these cage nuts Instructions included. are no longer available. Can only be used with A9155 - See Price Set/24 $ 4.85 Page Spec. 38. A9156 28-31 Price Set/3 $ 4.50 Gas Cap Vented gas cap in the style used for Sediment Bowl Screen '28-'29 cars. Chrome over brass. This brass screen fits between the bowl Includes gasket. gasket and the bulb housing on the glass sediment bulbs

A9030A 28-29 Price Ea. $ 17.90 A9155SC 28-31 Price Ea. $ 1.65

Save 5% - Order online at www.mikes-afordable.com Spec.37 Mike's "A" FORD-ABLE Parts

Sediment Bowl Assembly 1928 to 1931 Cast Iron Sediment Bowl Glass sediment bowl was originally an option from Mid ’29 but will work on all A's, except for indented firewalls. 7/8 - 14 Nut Gasket (A9173 - below) and Screen (1-1/4 Wrench) (A9155SC - Page Spec. 37) are included. A9156A Use Micro Filter (A9156 - Page Spec. 37) in this Bowl. A9155 28-31 Price Ea. $ 26.95 Lock Washer Late '31 Filter Kit These three items are Use this kit if you are NOT running the not available new. correct side-bowl style Zenith Carb. Designed to accommodate the late 1931 Model A's with the Mid 1929 to Early 1931 Glass Sediment Bowl gas valve on the firewall. Includes a glass bowl type sediment bulb along with gas lines and fittings to install. The copper sediment bowl screen can be replaced by using A9155SC. A9155L 1931 Price Kit $ 27.95 Cork / Neoprene Gasket - A9173 & N Special Nut Sediment Bowl Gaskets Screen - (No Lock Washer) For the glass sediment bowl. Neoprene should A9155SC - Not Available be replaced when you remove the bowl. Glass Bowl - A9158 A9173 28-31 Cork Price Ea. $ 0.35

Thanks to Les Andrews for the use of his drawings.

A9173N 28-31 Neoprene Side-Bowl Rebuild Kit With this you can rebuild your side bowl Price Ea. $ 0.55 filter. Mounted on the side of the carb. SPECIALITY CARS SPECIALITY

Sediment Bowl Glass Replace your discolored bowl with a new clear one. A9161SC Late 1931 Price Kit/3 $ 2.25 Side Filter Bolt A9158 28-31 This is the special bolt to hold the side Price Ea. $ 5.50 bowl filter to the carb on thelate ’31 A's.

Side Bowl Filter On the late ’31 A's, Ford moved the filter A9161B 1931 Price Ea. $ 4.60 to the side of the carburetor. Complete with all hardware. Side Bowl Drain Valve and Spring For the late ’31 A's, this drain needle A9161 1931 Price Set $ 51.00 with spring screws into the bottom of the filter. Side Bowl Filter Without Hardware If all you need is the side bowl filter, and A9161V 1931 Price Ea. $ 6.35 not all of the hardware. Sediment Bowl Brass Cap Plug For Cast Iron bulbs. Goes into the bottom of A9161A 1931 Price Ea. $ 33.00 the cast iron sediment bulb and A9177 (Page Spec. 39) threads into it.

A9175 28-31 Price Ea. $ 8.50 Spec.38 Give us a call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts

Sediment Bowl Brass Drain Valve & Forged Fuel shut Off Valve Packing Nut A9195B Drain & Spring. This brass nut holds the For Cast Iron bowls. packing in place the sediment bulb. A9195AR A9177 28-31 Price Set $ 11.95 A9195AR 1928 - late 1929 Price Ea. $ 3.50 A9195B 1929-1931 Price Ea. $ 2.50 Installation of Repair Kit for Cast Iron Bowl Late ’31 Gas Shut Off Valve Cast Iron Bowl This all brass valve was used on the late '31 Filter Screen A's with the indented firewall. This is fitted - A9155RK onto the firewall in the engine compartment.

Lead Washer - A9189B 1931 Price Ea. $ 36.95 A9155RK Brass Nut / Petcock Seat - Electric Fuel Cut Off Spring - A9155RK A9175 Don't Leave this off!!!! How often have we forgotten to switch Early Models off the gas. Well now you don't have to, Drain Petcock - A9177 Only - A9195AR just leave your gas on and let the Electric Fuel Cut Off do the job for you. Made to go on your 1/4" fuel line that runs from the firewall to the carburetor. Simply

Fuel Shut off Valve Turn the key On or off - THAT'S IT. SPECIALITY CARS This all brass valve is inside the Comes with Complete instructions. car to shut the gas off going to the Available in 6 or 12 Volt. carb. A9189 28-31 6 Volt Price Set $ 55.00 A9189/12V 28-31 12 Volt Price Set $ 55.00 A9189A 28-31 Price Ea. $ 32.25 Fuel Valve Grommet Installation of Fuel Shut Off & Gas For the late ’31 valves that mount on the Tank Screen (A9193T) into A9189A firewall, you'll need this excellent repro. to go in the hole.

A9171 1931 Price Ea. $ 1.95

Gas Shut Off Fuel Valve Handle Only Handle only for the earlier (A9189A) shut off valve.

A9189H 28-31 Price Ea. $ 2.95

Gas Tank Screen (Fuel Shut Off) Gas Shut Off Fuel Valve Handle Only This screen presses into the gas shut-off This is the forged style handle used from valve where it goes into the gas tank to keep the beginning until April 1929. sediment and rust out of the carb.

A9191A 28 - April 29 Price Ea. $ 13.95 A9193T 28-31 Price Ea. $ 3.15 Gas Shut off Valve Packing If your shut off valve isn't shutting off, try replacing the packing before buying a new valve.

A9193 28-31 Price Ea. $ 0.95 Save 5% - Order online at www.mikes-afordable.com Spec.39 Mike's "A" FORD-ABLE Parts

Gas Valve Repair Kit Gas Line Fittings Use this complete kit to rebuild the Like the original 9/16 head fittings original style gas valve. Includes packing, used on the late ’31 A's. Set ferrule jam nut, lock washer and gas resistant no more than 1/8" from the end lubricant. Will also fitlate 31's. of the tube.

A9193S 28-31 Price Set/4 $ 2.50 A9243B 1931 Price Set $ 2.80 Inside Gas Lines This line connects the gas valve Gas Tank Clamps under the gas tank to the sediment Hold the bottom of the gas tank stable bowl on the firewall. 5/16 " tubing. with these. 5 per side needed for ’28-’29; 2 per side needed for ’30-’31. A9230A 28-29 Price Ea. $ 7.50

A35266AR 28-29 10 Needed Price Ea. $ 2.40

A9230B 30-31 Price Ea. $ 6.75

Modern Gas Line Valve If you are having continuous trouble A35266BR 30-31 4 Needed Price Ea. $ 2.40 with your gas line valve - we now have a modern valve in line - this guarantees a complete shut off with a quarter turn of the handle.

A9230AV 28-29 Price Ea. $ 55.00

This is an excellent solution to a leaking gas

SPECIALITY CARS SPECIALITY problem.

A9230BV 30-31 Price Ea. $ 55.00

Gas Line This line with brass fittings connect the sediment bulb to the carb. Not for the late ’31's A's.

A9240B 28-31 Price Ea. $ 4.50

For the late '31's with indented firewalls and side bowl carburetors. Includes Fittings.

A9240C 1931 Price Ea. $ 4.60

Gas Line Fitting Like the original brass gas line fittings.

A9243 28-31 Price Ea. $ 1.50 Spec.40 Give us a call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts

Gas Gauge Rebuilding Set This set includes cork gaskets, GAS GAUGE lens, face plate and cork float. The order is gasket, glass, gasket, Tool Set face plate, inner nut. Safely work on your gas gauge with Large gasket against tank, gas this cast aluminum heat treated tool gauge assembly, brass washer set. Will not damage nuts. & outer nut. A9320S 28-31 Price Set/9 $ 5.95

Gas Gauge Cork Float Only T9300 28-31 Price Set/2 $ 6.45 You can buy this cork float separately if its all you need. Gas Gauge Assembly Treated to resist gas. Complete assembly Inner and Outer Nut & A9312F 28-31 Price Ea. $ 1.95 Gaskets. Gas Gauge Neoprene Float You can now get a Gas and Alcohol proof float to eliminate the problem of having your A9312D 28-31 Price Set $ 36.30 cork float disintegrate over time in the gas.

Gas Gauge Assembly

A9313B 28-31 Price Ea. $ 4.45 SPECIALITY CARS Housing - A9312 Gas Gauge Brass Float Gasket - A9321/23 Modern style gas float based on the design of a carburetor float. You should Sight Glass - A9323 never have any trouble with this.

Gasket - A9321/23 Metal Indicator A9313C 28-31 Price Ea. $ 9.95 Plate - A9325 Gas Gauge Gaskets Inner Star Choose between cork like Ford used Ring (Nut) - A9326 or modern neoprene.

A9321-23 28-31 Cork Price Set/4 $ 1.25 A9321-23N 28-31 Neoprene Price Set/4 $ 1.75 Cork Gasket - A9321/23 Gas Gauge Lens Thin Brass Washer(s) - A9321/23 Glass lens. - not available in A9321/23N

Outer Ring Nut - A9330 A9323 28-31 Price Ea. $ 0.95 Thanks to Les Andrews for the use of his drawings. Gas Gauge Face Plate Like the original.

A9325 28-31 Price Ea. $ 2.10 Save 5% - Order online at www.mikes-afordable.com Spec.41 Mike's "A" FORD-ABLE Parts

Gas Gauge Inner Nut Chrome Finished inner nut for the "A" gas gauge. SPEEDOMETER

Speedometer Mount Set A9326 28-31 This set of 2 screws, nuts, and lock washers Price Ea. $ 6.55 is used to mount your speedometer to the instrument panel. Gas Gauge Outer Nut Chrome finished outer nut for the A17255MB 28-31 2 x 1/4" - 20 x 1/2" screws + 1/2" "A" gas gauge. square nut & lock washer Price Set/4 $ 0.80

A9330 28-31 Rebuilt Speedometers Price Ea. $ 6.75 Sold on EXCHANGE ONLY. Mike must have your complete re-buildable core to "B" Fuel Pump Rebuild Kit ship a rebuilt one out. A complete rebuild kit for your NO OUTRIGHT SALES. '32-'34 4 cy. fuel pump. NO EXCEPTIONS. Northeast Ovals are no longer rebuilt Waltham Oval and Round are no longer rebuilt A17255AS 28-30 Oval face Price Ea. $ 225.95 B9349A 32-34 Price Set $ 39.95 A17255BS 30-31 Round face Price Ea. $ 225.95 "B" Fuel Pump Gasket This gasket goes between the block Speedometer Bezel Rim - Nickel and the fuel pump Shiny new face plate to replace that cracked on a "B" 4 cyl. engine. or broken plate.

B9374 32-34 Price Ea. $ 1.00

SPECIALITY CARS SPECIALITY "B" Fuel Pump Diaphram A17259A 28-30 Oval S/W Included in the B9349A kit. Price Ea. $ 19.95 A17259C June '30-31 Round S/W Price Ea. $ 16.75 A17259D June '30-31 Round Waltham B9390 32-34 Price Ea. $ 5.00 Price Ea. $ 16.95

Speedometer Lens If your old glass lens has gotten scratched or dingy over the years, replace it with one of these.

A17256AR Oval Price Ea. $ 1.10

A17256B Round Price Ea. $ 1.00

Spec.42 Give us a call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts

Speedometer Lens Gaskets Speedometer Calibration by Wiley Higgins Mike also has new gaskets for the speedometer lens. While driving a Model A, the optimum driving speed is a steady 45 MPH. This speed moves you along at a good pace and helps keep you out of the way of most traffic, while not putting too much strain on your engine. If your Model A won't hold a steady 45 M.p.h., something needs to be corrected. A17257AR 1928 - June '30 Oval face Price Pair $ 1.15 First of all, a Model A Speedometer usually is not accurate after A17257B July '30 - 1931 Round face over 60 years of use, even it has been rebuilt by a professional. Price Pair $ 1.15 Also, tire size and rear-end ratio have an effect. So, your speedometer may indicate a different speed than you are actually Speedometer Lens Retainer travelling down the road - either faster or slower. This ring holds the lens into the chrome face for the round speedometer. The best method of determining the actual speed you are Sorry not available for Oval Lenses. travelling is to conduct a time/distance check. Here's how:

1. Select a reasonably straight and level stretch of highway. A17258B 30-31 Price Ea. $ 3.25 2. Use your digital or sweep second hand watch as a stop watch. 3. As you pass any mile post (remember, straight and level is Speedometer Face Plate best), start the stop watch or note the seconds on the sweep This is the black plate that fits behind the second hand. chrome facing on the Speedometer. 4. Hold the same, steady speed for one mile to the next mile post, and note how many seconds have elapsed. 5. Consult the chart below to determine your true speed over the SPECIALITY CARS ground. A17268A 28 - June 30 Oval speedo 6. Repeat steps 1. through 5. above two or three times and get Price Ea. $ 6.20 an average. A17268C June 30 - 1931 Rnd Stewart Warner 7. Adjust your speed over the ground slower or faster if you have Price Ea. $ 6.80 a speedometer error to hold a steady 45 M.p.h.. For example, it A17268D June 30 - 1931 Round Waltham takes 80 seconds to go 1 mile if your true ground speed is 45 Price Ea. $ 7.85 M.p.h..

SEC (1 Mile) MPH SEC (1 Mile) MPH Speedometer Decals 102 ...... 35.3 86 ...... 41.9 Replace your tired number decal 101 35.6 85 42.4 with the right new one. 100 ...... 36.0 84 ...... 42.9 99 36.4 83 43.4 98 ...... 36.7 82 ...... 43.9 97 37.1 81 44.4 96 ...... 37.5 80 ...... 45.0 95 37.9 79 45.6 94 ...... 38.3 78 ...... 46.2 A17255A '28- June '30 Oval Faces Speedo 93 38.7 77 46.8 Price Ea. $ 2.75 92 ...... 39.1 76 ...... 47.4 A17255B July '30-31 Round Faced Stewart Warner - 91 39.6 75 48.0 7/8" Wheel 90 ...... 40.0 74 ...... 48.7 Price Ea. $ 2.75 89 40.5 73 49.3 A17255C July '30-31 Round Faced Waltham - 88 ...... 40.9 72 ...... 50.0 3/4" Wheel 87 41.4 Price Ea. $ 2.75 A17255D July '30-31 Round Faced Northeast Price Ea. $ 3.00

Save 5% - Order online at www.mikes-afordable.com Spec.43 Mike's "A" FORD-ABLE Parts

Water Inlet - Speedo Cable & Cut-out Wire Clip This wire clip was used in several places by Ford: for the water inlet and speedometer cable inside the firewall for all years; for the cutout wire on the firewall in 30-31. A14577A 28-31 Price Ea. $ 1.50

Firewall Wire Clip Bolt (Round) This is the correct round head screw with lock washer to attach the wire clip to the firewall. Paint Black. Use with A14577A & B - Page Gen. 196. A14577BR 28-31 12/24" x 1/2" screw & l.w. Price Set/2 $ 0.40

Speedometer Cables Due to the fact that there are several manufacturers of interior cables and they are all being reproduced in different lengths, thereby causing a lot of confusion and problems we are no longer stock inner cables seperatly. Replace your worn out speedometer cable with one of these new complete assemblies with steel ends. Mike's note: The early Ford cable was 1/2" in diameter while the latter was 1/4". The early gear on the drive shaft key has a round cable end with key up. The '30-'31 accepts the square cable. Speedo End Square - Drive end Keyed A17260AU 1928 - June '30 USA (oval) SPECIALITY CARS SPECIALITY Price Ea. $ 33.95 Speedo End Square - Drive end Square Speedometer Trip Stem A17260B July '30 - 31 USA (round) Nickel plated, knurled stem that pulls Price Ea. $ 26.95 out on the Oval Speedo to set the odometer. Complete stem assembly with gear and Black Vinyl Covered Speedometer Cable retaining washer. An inexpensive alternative to the original flexible cables. For the round speedometer. A17267 28 - Mid 1930 Price Set $ 20.00

Speedometer Grommet This speedometer grommet fits in the firewall for the cable to go through, next A17260C 30 - 31 Price Ea. $ 15.00 to the choke rod. Speedometer Lube A14567 28-31 Price Ea. $ 0.75 If your cable is OK but not turning smoothly, get this 7cc packet Gas Tank Speedometer Cable Grommet of graphite lubricant. This elongated grommet will help save your cable that runs under the gas tank in the tunnel to the speedo. A17260L 28-? Price Ea. $ 2.95

A9066R 28-29 Price Ea. $ 3.45

Spec.44 Give us a call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts

Speedometer Support Clip Speedometer Housing and Gear Assembly. This support clip with mounting hardware A complete new housing and gear assembly have been made from goes on the frame rail to hold the the FORD blue print. Includes gear, shaft and retainer. Order speedometer cable. Gasket A17275 Separately. 5/16-24 x 11/16 Bolt, Lockwasher and Nut

A17265A 28-30 Oval speedo - Price Ea. $ 2.75 A17265B 30-31 Round speedo Price Ea. $ 2.75

Speedometer Drive Gears Only A17271A 1928 - June 1930 - Standard Gear with Mike also has the drive gears available for Round Hole Shaft for 21" Tire both the 3.54 and 3.78 rear end gears. Price Ea. $ 56.95 A17271B June 1930 - 1931 - Standard Gear with Square Hole Shaft for 19" Tire A17270A 28-29 19 Tooth Gear used with 21" Price Ea. $ 56.95 and 19" A17271C 1928 - June 1930 - High Gear with Round Price Ea. $ 14.60 Hole Shaft for 21" Tire Price Ea. $ 56.95 A17271D June 1930 - 1931 - High Gear with Square Hole Shaft for 19" Tire Price Ea. $ 56.95 A17270B 30-31 18 Tooth Gear used 19" Tires Price Ea. $ 12.25 SPECIALITY CARS

Extra High Speed Drive Gear This gear goes in the speedo drive assembly that bolts to the bottom of the torque tube. This is a high strength plastic 17 tooth gear that is used with the A4209XHS. See Page Gen. 84.

A17270C 28-31 3:27 Ratio - 17 Tooth Price Ea. $ 29.95

Speedometer Housing Only New Housings are now available. Replace your worn housing with a new one. Speedometer Gasket Here’s a gasket to get the proper A17271 28-31 Price Ea. $ 41.00 gear mesh on the gear case.

A17275 28-31 Price Ea. $ 0.50

Speedometer Gear and Case Mount Bolts Mike has this set of two fine-threaded bolts with lockwashers to bolt the speedometer gear and case to the torque tube.

A17275MB 28-31 2 x 1/4" - 28 x 1" bolts & l.w. Price Set/4 $ 0.60

Save 5% - Order online at www.mikes-afordable.com Spec.45 Mike's "A" FORD-ABLE Parts

Speedometer Drive Gear Shaft The end of the speedometer cable slides into this shaft in the MIRROR gear/case assembly that bolts to the torque tube. Square end Rear View Mirror Screws (S) and Round end (R) available. This is the set of round headed machine screws to hold the mirror on the ’28-’29 A17273R 1928 - June '30 Closed Car. 3 x 10-32 x 5/8 Round Round ended cable / Oval Speedo Head Screws with washers and nuts. Price Ea. $ 12.95 A17681AMB 28-29 Price Set/3 $ 1.50

Rear View Mirror Mount Screws This set of 3 chromed oval headed wood screws is used to mount the rear view mirror to the wooden header. A17273S July '30 - '31 3 x #10 x 1" Oval Head Screw. Square ended cable / Round Speedo Price Ea. $ 12.95 A17681BMB 30-31 Price Set/3 $ 1.00 Speedometer Shaft Retainer This retainer goes into the threaded end of Inside Rear View Mirror Bracket Clip the gear and case to prevent the shaft from These fit the mirrors A, B, C H and G as coming out. seen in Judging Standards. A17274A 28 - July '30 - Short Retainer Price Ea. $ 1.40

RAR252 Price $ 4.95

A17274B July '30 - 1931 - Longer Retainer Price Ea. $ 1.40 Closed Car Mirror This mirror has a black painted frame for the ’28-’29 Closed Car. Speedometer Snap Ring

SPECIALITY CARS SPECIALITY This snap ring holds the speedometer drive gear and thrust washer in place on the drive shaft. A17682AS 28-29 Black Price Ea. $ 19.25 A17286 28-37 Price Ea. $ 0.75 Open Car Mirror This mirror with frame is for the Speedometer Thrust Washer '28-’29 Open Car. The thrust washer goes onto the drive shaft between the bearing and the speedometer drive gear.

A17290 28-48 Price Ea. $ 1.95 A17681AS 28-29 Black Price Ea. $ 21.95

Closed Car Mirror Mike has both the black and the Stainless rear view mirrors for the '30-’31 Closed Car.

A17682BS 30-31 Black Price Ea. $ 23.65 A17682SS 30-31 Stainless Price Ea. $ 30.25

Spec.46 Give us a call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts

Open Car Mirror Closed Car Hinge Mirror Mike has the stainless steel mirrors for This mirror with mounting pin the ’30-’31 Open Car. fits all’28-’31 Closed Cars. Chrome bracket with polished stainless mirror head that adjusts. Open car. 4 " Mirror. Not for Slant Windshield Cars. 28-29 Shown A17681SS 30-31 Stainless A17741A 28-29 Left or Right Price Ea. $ 30.25 Price Ea. $ 39.05 A17741BL 30-31 Left Rear View Mirror Glass Price Ea. $ 39.05 If your mirror is cloudy or the A17741BR 30-31 Right plating has worn off, replace it Price Ea. $ 39.05 with one of these quality beveled mirrors. The smaller is correct but Hinge Mirror Head Only the larger gives better visibility. If the hinge arms are still in good shape and all you need to replace is the mirror - these A17704 Original Size - 2-1/2" x 4 1/2" are now available. Price Ea. $ 5.50 A17704B 2-1/2" x 6" Price Ea. $ 6.50 B17741MH 28-30 Price Ea. $ 20.20 1928-1929 Open Car Post Mirror This screws into the screw hole that Hinge Mirror Pin This chrome finished pin will come with any new Hinge Mirror. holds the windshield stanchion to SPECIALITY CARS the body of the ’28-’29 Open Cars. A longer pin is required 5/16 - 24 Thread. when installing mirrors You must drill and tap for the on your car. '28-'29. Not for Slant Windshield Fordors. AR17700P 28-29 4" Glass A17741HPI 28-31 Price Ea. $ 2.45 Price Ea. $ 38.45 Sidemount Mirror This style sidemount mirror is attached 1930-1931 Open Car Post Mirror with a leather strap. This mounts on the flat area about halfway up the driver side stanchion on the ’30-’31 Deluxe Open Cars. 7/16 - 20 Thread.

B17700P 30-31 Price Ea. $ 38.45 B17700SM Price Ea. $ 47.50 Closed Car Clamp On Mirror (Peep Mirror) This mirror fits any closed car Open Car Windwing Mirror by clamping onto the front of This stainless mirror clamps to the door edge with two set the windwing glass. screws. Chrome bracket with Ideal for Roadsters & Phaetons. polished stainless mirror head. 4" Mirror. B17700WWSS 28-31 A17741U 28-31 Price Ea. $ 25.95 Price Ea. $ 27.50 Closed Car Peep Mirror A chrome mirror that will easily attach in just minutes. Attach the two set screws to the top of the door. Can be used on either the driver or the passenger side door.

A17700PL 28-31 Price Ea. $ 21.95 Save 5% - Order online at www.mikes-afordable.com Spec.47 Mike's "A" FORD-ABLE Parts

Closed Cab Truck Hinge Mirror This is a hinged style mirror for the Closed Cab Commercial vehicles.

A17741AB 28-31 5" mirror glass Price Ea. $ 31.00

Closed Cab Post Mirror (Bolt On) The ’28-’29 Closed Cab Trucks can use this type mirror which mounts to the door post. 5/16-18 Acorn Nut.

A17700PU 28-29 5" mirror glass Price Ea. $ 38.55

Mirror Head Only A 5" diameter black mirror head for the Commercial Vehicles Only. Has a shouldered 1/4" male stud coming out the back.

A17700MH 28-31 Price Ea. $ 9.95

Clock Mirrors Mirror clocks are designed especially for the Model A

SPECIALITY CARS SPECIALITY Fords. Two of the outstanding features found in each Clock Mirror are the beautiful beveled quality mirror along with the accurate and dependable Quartz timepiece with its Arabic or Ro- man Numeral dial reflecting styles of the past. Comes with a 2 year manufacturer warranty. Please make sure that your bracket will adjust to hold a 2"” high mirror. Shown on a bracket - this is NOT included.

A17705AS Silver Arabic A17705AG Gold Arabic A17705RS Silver Roman Numeral A17705RG Gold Roman Numeral Price Ea. $ 95.00

Clock Mirror with Polished Edge A beautiful replacement clock mirror with a polished edge. The mirror is not glass.

A17706 28-31 Price Ea. $ 39.65

Spec.48 Give us a call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike'sMike's "A" "A" FORD-ABLE FORD-ABLE Parts Parts Cowl Lights Beautiful reproductions! The '28-'29's are chrome and the '30-'31's are COWL LIGHT stainless with chrome arms.

A13302AR 28-29 The following new parts are required to Price Pair $ 170.00 complete a restoration of your Cowl lights. A13302ES 30-31 Price Pair $ 126.00 This is only a guide - do not assume that this A13302ARTS 28-29 6V w/turn signal is all that is needed, all other parts need to be Price Pair $ 187.00 thoroughly checked. A13302ESTS 30-31 6V w/turn signal Price Pair $ 149.00

1. Bulbs - A13466 Tail Light, Parking Light, Cowl, Instrument 2. Arms - A13301AR or BS Panel & Dome Light Bulb 3. Screw Set - A13302BT 3 Candle Power as original. 4. Mounting Plate - A13303 10 Candle Power is available if 5. Mounting Plate Rivet - A13307 you would prefer a brighter bulb. A13466/3 3 CP Price Ea. $ 0.90 6. Rim Tab - A13305 A13466/10 10 CP Price Ea. $ 0.90 7. Lens - A13308AR, D or DA 8. Gaskets - A13309A or C Tail Light & Parking Quartz Bulbs SPECIALITY CARS 9. Mounting Bolts - A13327 If you want a lot more light, use these direct 10. Pigtails - A13412 replacements for your original bulbs. These 11. Sockets - A13338 are also known as "Ugly Bulbs". Will not work with sealed beam or halogen 12. Reflectors - A13315C headlights. 13. Rim Retainer Clips - A13316S Tail Light and Parking: 50/20 Watt 14. Cross Over Wire - A13302XO B13466Q6 6 Volt Price Ea. $ 13.75 B13466Q12 12 Volt Price Ea. $ 11.00 Cowl Lights Arm Position Template Cowl Light Turn Signal Conversion Kit Drivers Side - 1930 - 31 Cowl Lights This kit can convert both cowl lights to Line this edge up with lower edge of belt turn signals. It uses a double-filament bulb 2" Stainless Steel Cowl Band so it can be used as a parking light as 3/4" Hole well.

15/16" Center point to band

A13303TSAR 28-29 6V Price Set $ 46.24 Passenger Side - 1930 - 31 Cowl Lights A13303TS 30-31 6V Price Set $ 46.24

A13303TSR 28-29 12V Price Set $ 46.24

A13303TSB 30-31 12V Price Set $ 46.24

Give us your email address, confirmation and tracking info right at your fingertips! Spec.49 Mike's "A" FORD-ABLE Parts Cowl Light Turn Signal Bulb Only Cowl Light Marking Tool The turn signal kit uses this This little tool takes the guesswork double filament bulb. Offset out of deciding where to drill new tabs. holes when installing a cowl light.

A13304/6 6 Volt Price Ea. $ 2.10 T13300X 28-31 Price Set $ 4.25 A13304/12 12 Volt Price Ea. $ 2.10 Cowl & Tail Light Visor 1928-1929 Cowl Light Arms Match up your cowl lights with a These chrome plated cowl light arms visor set. Just like the may be all you need if your light headlight set. See page Gen. 185 buckets are still in good shape. for Headlight visors.

A13001A 28-31 W/Jewel Price Pair $ 23.00 A13301AR 28-29 Price Pair $ 82.50 Cowl Light Rims 1930-1931 Cowl Light Arms Highly Polished Stainless Steel rim. Good chrome-plated arms for the '30-'31 cowl lights.

A13306AR 28-29 Price Ea. $ 14.00 A13301BS 30-31 Price Pair $ 87.95 A13306B 30-31 Price Ea. $ 14.00

Cowl Light Arm Mounting Plate Cowl Light Rim Retainer Clips This plate fits inside the bucket that the This set of retainer clips will arm mounting screws go into. hold the lens to the rim for both your '30-'31 cowl lights.

SPECIALITY CARS SPECIALITY A13316S 30-31 Price Set / 4 $ 1.15 A13303 30-31 Price Ea. $ 3.05 Cowl Light Rim Tab Cowl Light Arm Mounting Plate Rivet The rim screw goes into this small This tubular rivet holds both the tab. Mounting Plate (A13303) and the Rim Tab (A13305) to the bucket.

A13305 30-31 Price Ea. $ 2.55 A13307 30-32 Price Ea. $ 0.60 Cowl Light Lens Cowl Light Mount Bracket Clear lens. You'll need these brackets for inside the cowl section if you're installing cowls on your "A".

A13308AR 28-29 Price Ea. $ 6.55 A13308D 30-31 Price Ea. $ 4.35 A13300BR 28-29 Price Pair $ 46.00 A13300BB 30-31 Price Pair $ 48.00

Spec.50 Give us a call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts Amber Cowl Light Lens Cowl Light Cross Over Wire If you've converted to a turn signal, This wire connects the two cowls and these amber lenses will show up runs a single wire to the wiring better. harness.

A13308DA 30-31 Price Ea. $ 6.75 A13302XO 28-34 Price Ea. $ 8.25

Lens Gaskets Cowl Light Wire Connector Replace yours to keep moisture out, This special ceramic connector was extend the life of the bulb. located at the base of the steering column to connect the cross over wire to the harness.

A13309A 28-29 Price Pair $ 1.15 A13302C 28-31 Price Set $ 7.95 A13309C 30-31 Price Pair $ 1.15 Cowl Light Wood Blocks Cowl Light Reflector These were used in '30-'31 to prevent This nice chrome reflector with bulb denting. They fit between the cowl socket fits the’28-’29 cowl lights. panel and the brace that the arm bolt goes through. SPECIALITY CARS A13318 30-31 Price Pair $ 3.95 A13315AR 28-29 Price Ea. $ 14.25 Cowl Light Mount Bolt This bolt has a hole through it for Cowl Light Reflector the cowl wire to go through. It Brand new, well polished reflectors mounts the light to the body. for your '30-'31 cowl lamps.

A13327 30-31 Price Ea. $ 1.25

Cowl Light Grommets A13315C 30-31 Price Ea. $ 8.75 These grommets were used for '28-'29 only and go where the arms go through Cowl Light Screw Set the panels. Stainless screws with lock washers to attach the cowl light to the A13324R 28-29 Price Pair $ 3.80 cowl light bucket. 14 Piece Set. 6 x 10/32 x 1/2" & Washers Cowl Light Pigtails Yellow with black tracer like the A13302BT 30-31 Price Set/14 $ 2.00 original, this wire goes through the socket and out the arm. Cowl Light Socket Replacement socket for the '30-'31 A13412 28-34 cowl light bulb. Has the rivet, but Price Pair $ 3.50 no wire pigtail. Cowl Light Wire Supports You'll need three of these to hold the cowl light cross over wire inside A13338 30-31 Price Set $ 3.75 the firewall.

A14593 30-31 Price Set $ 2.90 A13339 Rivet only Price Ea. $ 0.50

Give us your email address, confirmation and tracking info right at your fingertips! Spec.51 Mike's "A" FORD-ABLE Parts Cowl Light Wire Support Or you can use three of these to hold the wires for the cowl lights and the wipers.

A14593A 28-29 Price Ea. $ 2.25

Turn Signal Kit (6 Volt) BE SAFE. Signal Stat. Add this complete turn signal kit directly to your tail lights. Kit includes the switch, fuse, flasher, flasher socket and complete instructions. Cowl conversion kit works with this one. If you do not have cowl lights you will need to install front turn signal lights of some A Model A sort. Comes with instructions. 11 Piece Set. For more turn sig- nals items see our Turn Signal Section on Page Spec. 60. A13310A 28-31 Price Set/11 $ 58.95

Turn Signal Flasher 6-Volt flashers are hard to find; you'll need this if you have added turn signals to your A.

A13311 28-31 Price Ea. $ 5.25

Complete Turn Signal Kit (6 or 12 Volt + or - ) Now you can have super bright Amber LED turn signals for your "A"! Kit includes super bright LED turn signals, stainless steel

SPECIALITY CARS SPECIALITY brackets, controller and wire. The easy hookup connects to 6 Volt OR 12 Volt cars with negative or positive ground without even flipping a switch. The kit features all solid state components (there are no turn signal flashers to wear out and the LED's will last for over 25 years!). The whole kit is bolted on so you don't have to permanently modify your car. Slim line turn signals mount to bumper clamp bolts and have a one wire hook up. Each turn signal is individually short circuit protected so if one wire shorts to the chassis, only that one light won't come on. Eliminate the short and the turn signal will work again. Also has a hazard light function and is backed by a one year manufacturer's warranty. 20 Piece Set.

A13311A 28-31 Price Kit/20 $ 169.95

Spec.52 Give us a call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts "Duolamp" Tail Light Copy of the original. Stainless Steel. Commercials used black painted - TAIL LIGHT left side has white lens - right side, no lens. Complete with half amber Specifications: lens, bulbs and wiring - also includes bracket screws. Parking, Tail: 3 CP, single contact Mazda 63 A13405SL 28-31 Left Price Ea. $ 37.95 Stop: 21 CP, single contact Mazda 1129 A13405SR 28-31 Right Price Ea. $ 37.95 The following new parts are required to "Duolamp" Tail Light Replacement Screw Kit complete a restoration of your Tail Lights. This is all of the screws that you will need This is only a guide - do not assume that this to refurbish your Tail light. 1 Set per Tail is all that is needed, all other parts need to be Light. thoroughly checked. A13405SK 28-31 Price Set/8 $ 3.65 1. Tail Light Rim - A13448SS 2. Tail Light Gasket Set - A13461 Commercial Tail Light These lamps have a black powder coated 3. Replacement Screw Set - A13405SK housing with a polished stainless rim 4. Lens - choose your style - A13450 as was used on commercial vehicles.

5. Snap Rings - A13456 SPECIALITY CARS 6. Licence Plate Lens - A13445 7. Retainer clips - A13446S A13405BL 29-31 Left Price Ea. $ 42.00 8. Tail Light socket Set -A13412S A13405BR 29-31 Right Price Ea. $ 36.00 9. Reinforcing Plate - A13463 10. Bracket to Fender Mounting Bolts - A13474B, SS Stop Light Bulb 11. Tail Light Bracket/Fender Rubber Pad - A13520 21 Candle Power. 12. Tail Light / Stop Light Bulbs - A13465 & A13466 13. Licence Plate Bolt - A13407MB 14. Stoplight Switch - A13480A or B A13465 28-31 Price Ea. $ 1.00

Tail Light, Parking Light, Cowl, Duo-Lamp Tail Light Repair Parts Instrument Panel & Dome Light Bulb A13450, R, S, BD 3 Candle Power as original. 10 Candle Power is available if A13447 you would prefer a brighter bulb. A13461 A13461 A13445 A13405RK A13466 A13446S - 6 Pieces A13466/3 3 CP Price Ea. $ 0.90 A13466/10 10 CP Price Ea. $ 0.90

Quartz Bulbs If you want a lot more light, use these direct A13465 A13405SL A13456 A13448SS, C or N replacements for your original bulbs. These or are also known as "Ugly Bulbs". A13405SR Tail Light and Parking: 20 Watt B13466Q6 6 Volt Price Ea. $ 13.75 B13466Q12 12 Volt Price Ea. $ 11.00

Stop Light: 50 Watt B13465Q6 6 Volt Price Ea. $ 13.75 B13465Q12 12 Volt Price Ea. $ 11.00 Give us your email address, confirmation and tracking info right at your fingertips! Spec.53 Mike's "A" FORD-ABLE Parts Cowl & Tail Light Visor Tail Light Blue Dot Lens Match up your Cowl & Tail Lights with a This is the all-red lens with the blue visor set. Just like the dot already installed in the stop section. headlight set.

A13001A 28-31 W/Jewel Price Pair $ 23.00 A13450BD 29-31 Price Ea. $ 13.75 Tail Light Rim We only keep the stainless as these will Tail Light Blue Dot not rust. For the DIYer, you can fit your own blue dot in with this. It has a chrome rim. 1 Piece Set. A13448SS 29-31 Stainless Need 1 Set for one lens. Price Ea. $ 5.75 A13450D 28-31 Price Set $ 4.95 LED Replacement Tail Light - All Red or Half Amber Tail Light Snap Ring Use this brand new product in your duo This was used to hold the lens in the tail lamp housing and have the advantage of light rim. The sequence was the rim LED Tail lights. 6 or 12 Volt. gasket, then the lens, then the snap ring.

12 Volt A13453 Right - Half Amber A13456 29-31 A13453R Right - Red Price Ea. $ 0.95 A13454 Left - Half Amber A13454R Left - Red Price Ea. $ 40.00 Tail Light Gasket This goes between the face of the lens 6 Volt and the rim but many put one on both A13455 Right - Half Amber sides of the lens to reduce the risk of A13455R Right - Red cracking. A13457 Left - Half Amber

SPECIALITY CARS SPECIALITY A13457R Left - Red Price Ea. $ 43.00 A13461 29-31 Price Ea. $ 0.50 Tail Light All Red Lens If your state does not allow License Plate Lens amber stop lights, this all red This is the clear lens for the left side lens is available. tail light to illuminate the license plate.

A13445 29-32 A13450R 1928 - Sept. '29 Price Ea. $ 5.45 Price Ea. $ 3.45

Tail Light Half Amber Lens License Lens Gasket This lens has a red section for the This is the gasket for the clear tail light and amber for the stop light. license lens.

A13447 29-32 Price Ea. $ 0.50 A13450 Sept. '29 - till end '31 Price Ea. $ 6.00 License Lens Retainer Clips Tail Light Stop Lens Two retainers and screws to hold the license This is a glass red lens with the letters lens in the tail light. "STOP” molded in amber. A13446S 28-32 4 piece set Price Set/4 $ 1.50 A13450S 29-31 Price Ea. $ 8.95 Spec.54 Give us a call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts Tail Light Loom Tail Light Reinforcing Plate This is what Ford used to protect Lessen the risk of damaging your fender the tail light wires from the elements. by using this plate under the fender Extends from tail light through to attach your tail light bracket. fender to under body.

A13463 29-31 A13412L 28-31 Price Ea. $ 1.25 Price Ea. $ 2.60

Tail Light Wire Clip Tail Light Bracket Pad This clip holds the tail light loom to the Protect your fender from metal to fender. metal vibration with this rubber pad which fits between the fender and the A14565 28-31 Price Ea. $ 2.65 tail light bracket.

Tail Light Wire Clip A13520 29-31 This clip holds the wire to the bottom Price Ea. $ 1.60 side of the wood subrail. Includes one clip and wood screw. Used on Tail Light Bracket 1928 - 1931 Fordors and 1928 - 1931 These brackets are ready to mount. Station Wagons. Same gauge steel Ford used. Used with teacup style tail lights.

A14592 28-32 Price Set $ 2.00 Not used on Pickups or Station SPECIALITY CARS Wagons. Tail Light Socket Press this socket into the tail light bucket A13471R 29-31 Right to hold the bulb. Price Ea. $ 9.85 A13471L 29-31 Left Price Ea. $ 9.85 A13471RC 29-31 Right - Chrome A13412S 29-31 Price Ea. $ 0.65 Price Ea. $ 13.95 A13471LC 29-31 Left - Chrome Double Contact Socket Price Ea. $ 13.95 These universal style sockets are used to convert any lamp to a dual filament Tail Light Bracket Bolts bulb that can be used for turn signals. This set of 3 special carriage bolts and nuts Use staggered pin bulbs. Some is used to bolt the tail light bracket modification to your lamp will be needed to the fender. Bolts have large heads. to accept these. 3 X 1/4-20 5/8 Bolt with Large Head. A13412DC 28-31 Price Ea. $ 8.10 Not used on 1928 Tudors and Phaetons.

Tail Light Wire Pigtails A13474BK 29-31 This pigtail with springs and washers Price Set/6 $ 1.75 extends out the back of the tail light to A13474SS 29-31 Stainless steel make your connection. Correct fabric and Price Set/9 $ 3.25 colors. Black for Taillight / Green for Stop Light. A13412/13 29-48 Price Pair $ 3.60 1928 Tudors and Phaetons Tail Light Cross Over Wire A13469X 1928 Price Set $ 0.95 This cross- over wire allows you to add a right tail light and then connect the two tail lights to the main harness.

A14423XO 28-31 Price Set $ 9.00

Give us your email address, confirmation and tracking info right at your fingertips! Spec.55 Mike's "A" FORD-ABLE Parts Commercial Tail Light Bracket Rear License Bracket This is a special cast iron bracket used for An identical reproduction of the the tail light on the following vehicles: original. ’29-’31 Station Wagon, ’30-’31 Panel Delivery, Deluxe Delivery and Deluxe Pick-Up and Special Delivery. A13406D 28-31 Price Ea. $ 6.50

A13472B 29-31 A13406SS 29-31 Polished Stainless Steel Price Ea. $ 9.50 Price Ea. $ 15.95

Commercial Tail Light Bracket Screws Rear License Plate Special Bolts These are the stainless screws and lock The nuts and bolts necessary to washers you'll need to attach the commercial mount your license plate. tail light to the bracket.

A13407MB 28-31 A13472BR 29-31 2 x 1/4" - 28 x 3/4" & l.w. Price Set/4 $ 4.35 Price Set/4 $ 0.95 License Plate Reflector Bolts Pickup Tail Light Shield A reproduction of an aftermarket accessory. These bolts are sold in This shield protects your wires from pairs and available in four different colors. the elements and accidental damage where they come out from the tail lights on commercial vehicles.

A13467 29-34 Price Ea. $ 6.25 A13408 Blue A13409 Amber Pickup Tail Light Bracket A13410 Green This is a nice cast iron bracket A13411 Red Price Pair $ 1.00 that is used on both the SPECIALITY CARS SPECIALITY Pickup Truck, Station Wagon Stop Light Switch and AA Trucks. The early A's used this type Used on teacup lights from switch which mounted on the March '29 till May '30 on Pickups - transmission. Don't forget to March '29 till End '31 on AA Pickups. order your link A13507R. A13470 29-37 Price Ea. $ 9.95 Best Quality.

Pickup Tail Light Mounting Block A13480A 28-30 Price Ea. $ 5.95 This is the wooden block needed to mount the tail light bracket on the Stop Light Switch Link Pickup. This is the metal link for the A13480A stop light switch.

A13471W 29-31 Price Ea. $ 2.95 A13507R 28-29 Price Ea. $ 1.45

Pickup Tail Light Bracket Block Bolts Stop Light Switch Two 1/4 x 3 Carriage Bolts, A few '29's had this but mostly lock washers and nuts to mount for '30-'31's. This bolts to the the Pickup Tail Light Bracket cross member of the frame. block. Needs A2465B (Page Gen. 50) Pedal to Brake shaft rod. Best Quality. A13470X 29-31 Price Set/6 $ 0.95 A13480B 30-31 Price Ea. $ 5.00 Spec.56 Give us a call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts Stop Light Switch Mounting Bolts Custom LED Third Brake Lights Here are the bolts, nuts, and lock washers Made in USA. Custom LED Third Brake Light fits in the back to mount the '30-'31 style stop light window of cars and trucks. Strong, twin switch to the cross member. suction cups attach the rugged, black 2 - 1/4-20 x 1/2" Bolts, ABS case to the glass in the back lockwashers and nuts. window. Two wire, easy hookup works with 6V or 12V negative or positive ground vehicles. Electronics feature all solid state components (nothing to wear A13480MB 30-31 out and the LEDs should last for over 25 years!). No permanent Price Set/6 $ 0.55 modifications to your car are required. Kit comes with Third Brake Light, harness, connectors, mounts, and suction cups. Logo 1928 / 1929 Stoplight Switch Mounting Lites Custom LED Third Brake Lights are backed by a one year manufacturer’s warranty. Stop Light A13312S STOP Price Kit $ 72.00 Switch Link - A13507 A13312A 1928 Price Kit $ 72.00 (1928/1929 Only) A13312B 1929 Price Kit $ 72.00 A13312C 1930 Price Kit $ 72.00 A13312D 1931 Price Kit $ 72.00 A2457 Switch - A13480A A custom Third Brake Light is available. Any 4 Characters of your choice is available, eg MIKE.

A13312O Special 4 Price Kit $ 99.65 SPECIALITY CARS Green Stoplight Wires Do you like the 1930 / 1931 Stoplight Switch Mounting sound of FREE Shipping?? A2465B Switch - A13480B

Green Stoplight Wires Order online Thanks to Les Andrews for the use of his drawings.

See Page XXX for the complete Turn Signal and get a 5% Section. Discount - this could cover your shipping costs!! Give us your email address, confirmation and tracking info right at your fingertips! Spec.57 Mike's "A" FORD-ABLE Parts Drum Tail Light and License Bracket to DRUM TAIL LIGHT Support Bracket Bolts

Stop Light Bulb 21 Candle Power. Two 5/16-24 x 11/16 Hex Bolts, L/w's and Nuts. See Quartz Bulbs on Page Spec. 53. A13607 28 - Early '29 Price Set $ 0.50 A13465 28-31 Price Ea. $ 1.00 Drum Tail Light Support Bracket to Body Bolts Tail Light, Parking Light, Cowl, Instrument Panel & Dome Light Bulb 3 Candle Power as original. 10 Candle Power is available if you would prefer a brighter bulb. A13466/3 3 CP Price Ea. $ 0.90 Two 5/16-24 x 5/8 Hex Bolts and L/w's. A13466/10 10 CP Price Ea. $ 0.90 A13673 28 - Early '29 Price Set $ 0.50

Complete Drum Tail Light Commercial Drum Tail Light Bracket Top quality reproduction with the black Used on drum tail lights. These were bracket and nickel body. Used on '28's used from 1928-July 1929 and early '29's. All black - used on on Pickups, AA Trucks commercial Vehicles. & Panel Deliveries. Fits Left or Right.

A13470A 28-29 Price Ea. $ 16.95 A13405DPL - Passenger - Left - Nickel Ea. $ 110.00 A13405DPR - Passenger - Right - Nickel Ea. $ 110.00 Drum Tail Light Bracket A13405DCL - Commercial - Left - Black Ea. $ 99.50 Used on drum tail lights. A13405DCR - Commercial - Right - Black Ea. $ 99.50 These were used from 1928-July 1929 on Coupes and Roadsters. SPECIALITY CARS SPECIALITY 1) Assemble contact-insulating washers and rivets. Seat down & upset rivet so that contact can be rotated. A13470AL 28-29 Left Price Ea. $ 17.95 2) Assemble divider plate using A13470AR 28-29 Right Price Ea. $ 23.50 3/16" rivets. 3) To install backing plug; (2) 3/16" Rivets tap into hole from front Note: Drill back- Drum Tail Light Bracket with slot turned ing plate These brackets were mounted onto 3/16" if required. clockwise until slot is the rear sub-frame of the body for level with plate. Rotate contact and the drum tail lights to mount onto. plug so contact Originally were only used on the enters small slot in brass plunger. When aligned tap in left, so you will have to drill the until locking plunger enters hole in rear of plate. right sub-frame to mount the right. Used on the Sedans and Phaetons. Drum Tail Light License Bracket Top quality steel reproduction. A13473AL 28-29 Left Price Ea. $ 22.50 Paint Black. A13473AR 28-29 Right Price Ea. $ 22.50

Drum Tail Lamp Socket This is the bulb socket for the '28-'29 drum tail light. A13406AR 28-29 Price Ea. $ 28.50

A13410A 28-29 Price Ea. $ 34.98

Spec.58 Give us a call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts Drum Tail Light Divider Plate Drum Red Lens This divider plate separates the tail lamp This is an all-red lens for the '28 from the stop lamp sections on the drum drum tail light. style tail light.

A13406DP 1928 - Early 1929 Price Set $ 21.75 A13450AR 28-29 Price Ea. $ 7.60

Drum Tail Light Body Drum Tail Light Lens Gasket This is a very good nickel-plated This is the round gasket for the drum reproduction. Body only. tail light. A13440DBPL - Passenger - Left - Nickel A13440DBPR - Passenger - Right - Nickel A13440DBCL - Commercial - Left - Black A13440DBCR - Commercial - Right - Black 1928 - Early '29 Price Ea. $ 31.00 A13461AR 1928 - Early '29 Price Ea. $ 0.60

Drum Retainer Screws Drum Tail Light Wire Clip This is the special hardware necessary You’ll need two of these to hold the to hold the tail light body and lens on. wire to the tail lamp bracket on the '28 drum tail light.

A13441BT 28-29 SPECIALITY CARS Price Set/6 $ 5.75 A14595 1928 - Early '29 Price Pair $ 2.95

Drum Stop Face Plate Drum Tail Light Extension Wire This steel insert with the word This wire goes from the drum tail light "STOP” fits behind the red lens. to the main wiring harness.

A13442AR 1928 - Early '29 Price Ea. $ 6.30 A14423AR 28-29 Price Ea. $ 5.65

Drum White License Lens For the '28 drum tail light only.

A13445AR 1928 - Early '29 Price Ea. $ 10.00

Drum Retainer Clips Two retainers and screws to hold the license lens in the drum tail light.

A13446SA 28-31 4 piece set Price Set/4 $ 1.50

Drum License Lens Gasket This is the gasket for the '28 license lens on the drum tail light.

A13447AR 1928 - Early '29 Price Ea. $ 0.75

Give us your email address, confirmation and tracking info right at your fingertips! Spec.59 Mike's "A" FORD-ABLE Parts Complete Turn Signal Kit (6 or 12 Volt + or - ) Now you can have super bright Amber LED turn signals for your "A"! Kit includes super bright LED turn signals, stainless steel TURN SIGNALS brackets, controller and wire. The easy hookup connects to 6 Volt OR 12 Volt cars with negative or positive ground without even Turn Signal Kit (6 Volt) flipping a switch. The kit features all solid state components (there BE SAFE. Signal Stat. Add this are no turn signal flashers to wear out and the LED's will last for complete turn signal kit directly over 25 years!). The whole kit is bolted on so you don't have to your tail lights. Kit includes to permanently modify your car. Slim line turn signals mount the switch, fuse, flasher, flasher to bumper clamp bolts and have a one wire hook up. Each turn socket and complete instructions. signal is individually short circuit protected so if one wire shorts Cowl conversion kit works with to the chassis, only that one light won't come on. Eliminate the this one. If you do not have short and the turn signal will work again. Also has a hazard light cowl lights you will need to install front turn signal lights of some function and is backed by a one year manufacturer's warranty. 20 sort. Comes with instructions. 11 Piece Set. Piece Set. A13310A 28-31 Price Set/11 $ 58.95

Turn Signal Flasher 6-Volt flashers are hard to find; you'll need this if you have added turn signals to your A.

A13311 28-31 Price Ea. $ 5.25

Turn Signal Lamps A13311A 28-31 Price Kit/20 $ 169.95 If you are using the A13310A Turn Signal Kit these are the turn signal lights that will fit between the front and rear bumper bars. No modifications needed. Don't forget to buy extra wire by the foot see wiring section on Page Gen. 198. Available for both 6 & 12 Volts.

SPECIALITY CARS SPECIALITY Use on front and rear. A13405T6 6 Volt - Amber Price Ea. $ 20.95 A13405T6R 6 Volt - Red Price Ea. $ 20.95 A13405T12 12Volt - Amber Price Ea. $ 19.95 A13405T12R 12 Volt - Red Price Ea. $ 19.95

LED Replacement Tail Light - All Red or Half Amber Use this brand new product in your duo lamp housing and have the advantage of LED Tail lights. 6 or 12 Volt.

12 Volt A13453 Right - Half Amber A13453R Right - Red A13454 Left - Half Amber A13454R Left - Red Price Ea. $ 40.00

6 Volt A13455 Right - Half Amber A13455R Right - Red A13457 Left - Half Amber A13457R Left - Red Price Ea. $ 43.00

Spec.60 Give us a call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts Dash Light Armored Cable This 1/8" diameter single strand cable is used for the dash light DASH & DOME LIGHT but can also be used for a sport light. Cut and sold in 12" lengths. Specifications: Instrument Panel: 3 CP, single contact, Mazda 63 A13710 28-31 Price Ft. $ 1.65 Dome: 3 CP, single contact, Mazda 63 Commercial Dome: 15 CP, single contact, Mazda 87 Dome Light Assembly (With Switch) This is the dome light with Dash Light switch. 6 Volt bulb installed. This mounts in the middle of the dash on the '28-'30 A's with the oval speedometer. Attach the dash wire to the charge post on the amp meter. A13708AR 1928 - June 1930 Price Ea. $ 22.55 A13771WS 30-31 Price Ea. $ 49.50

Dash, Dome, Cowl & Parking Light Bulb Dome Light Switch on Rim 3 Candle Power as original. A copy of the original switch and 10 Candle Power is available if lever that's located on the rim of the you would prefer a brighter bulb. round Dome Light (A13771). See Page Spec. 53 for Quartz Bulbs. A13466/3 3 CP Price Ea. $ 0.90 A13771SW 28-31 Price Ea. $ 14.95

A13466/10 10 CP Price Ea. $ 0.90 SPECIALITY CARS Dome Light Assembly (Without Switch) Dash Light Cover Same unit as A13771WS except this This is the cover only for the dash has no switch. You will have to light on the '28-'30 oval speedometer. purchase A13770 (Page Spec. 62) Only fits repro Dash light. Cover and A13769 (Page Spec. 63) A13705 28-30 Price Ea. $ 13.70 Switch and A13778 Wire - below.

Dash Light Bracket A13771 30-31 Price Ea. $ 45.65 If your dash light mounts up under the dash, you'll need one of these Dome Light Snap Ring brackets. This little cadmium plated ring can be hard to find but you'll need it to hold the lens onto the dome light. A13706BRC 30-31 Closed car. Price Ea. $ 1.95 A13771C 30-31 Price Ea. $ 5.50 A13706BRO 30-31 Open car. Price Ea. $ 1.55 Dome Light Lens Milky-colored replacement lens Dash Lamp Cap Only for the round dome light. For Open and Closed Cars. Fits A13771WS. Switch Type. A13771G 30-31 Price Ea. $ 8.50 A13705B 30-31 Price Ea. $ 13.50 Dome Light Wire Dash Light (Excellent Replacement) This is the correct 16 gauge cloth This is the dash lights for the covered wire; black with a blue '30-'31 A's with the round tracer. Order per foot needed for speedometer; this mounts under your vehicle. Wire starts at the the dash rail. drivers side of the terminal box, See A13710 for dash light armored cable. up the windshield post, half way across the header and back to the A13708B June '30 - till end '31 Closed Car dome light. Make sure you run a ground wire from the light to the A13708C June '30 - till end '31 Open Car side of the body. Price Ea. $ 24.15 A13778 Price Ft. $ 0.65 Give us your email address, confirmation and tracking info right at your fingertips! Spec.61 SPECIALITY CARS strument Panels&Parts. See PageGen.189for IgnitionSwitch,In Foot. See PageGen.198for Wire -Soldbythe A13769 A13770 mounts onthedoorpillar. This replacementswitchwithcover Dome LightSwitchandCover Spec.62 Give usacall -1-888-TRY-MIKE (879-6453) 28-31 28-31 Switch Cover Mike's "A" 1931 400A

Price Ea. Price Ea. $ $ FORD-ABLE - 8.75 2.75

Have an "A"Day! Parts Mike's "A" FORD-ABLE Parts

Garnish Moldings & Frames Sill Plates

Garnish Moldings Door Sill Panel The Victoria's had attractive garnish moldings under the regular This metal strip is nailed to the wood subrails on Cabriolets. garnish at the bottom of the window. This steel reproduction is quite nice.

A48696 30-31 Price Ea. $ 46.95

A542BVL 30-31 Left door - Victoria. Price Ea. $ 85.00 Cabriolet Door Sill Plates A542BVR 30-31 Right door - Victoria Reproduction sill plates used on '29-'31 Cabriolets. The '29-'30 Price Ea. $ 85.00 Cabriolets, 68A & B sill plates have one end that is square and the A542BVQ 30-31 Quarter window - Victoria other has two step cuts. They are 26 13/16" long. Ford Script. Price Ea. $ 78.00 The early Cabriolet 68A used plain sills.

Garnish Molding Screws These screws are 10/32 x 1/2 to attach the garnish molding to the door. A48683A Early 1929 Price Set $ 61.55

A342S 28-31 Price Ea. $ 0.15 SPECIALITY CARS The Mid 1929 - 1930 used Script Sill: Used on: Windshield Header Garnish 1929 Cabriolet 68A The Victoria used this garnish above the windshield. It's also 1930 Cabriolet 68B known as the header upholstery retainer. Primed and ready to paint.

A46483B 29-30 Price Pair $ 132.00 A542 30-31 Price Ea. $ 89.95 Each end of the 1931 Cabriolet 68C Door Pull Handle sill plates are square and This door pull handle comes are 26 3/8" long. complete with hardware to attach Brushed Aluminum, to the window molding on the Nail holes added. Cabriolets. A61062CR 29-31 Price Ea. $ 8.65 A48684 1931 Price Pair $ 82.50 Rear Window Frame Kit Mike has the rear window frame in Victoria Sill Plates stainless steel. Complete with glass. These are the correct sill plates for the 7" x 16 1/2" outside. Victoria and 400A. '29-'31 Cabriolet - 68A, B & C. 1931 - 400A The specified finishes for the inside steel frame are: Cabriolet - 68A & B 1929 ...... Satin Black Cabriolet - 68C 1930 & 1931 ...... Mahogany Grain A46480V 30-31 Price Set/2 $ 115.00 400A ...... Walnut Grain

A37639SS 28-31 Stainless - Outside only. Price Set $ 165.00 A37644 28-31 Glass Only Price Ea. $ 23.50 Always Open 24/7 Shop Online at www.mikes-afordable.com Spec.63 Mike's "A" FORD-ABLE Parts Sill Plate Screws for Wood Subrails The complete set of screws that secure the Sill Plates to the wooden sub-rails. SEAT PARTS Zinc Plated. Seat Adjuster Installation Original Sills used #8 x 3/4 A47832S A48676A 28-31 Price Set/38 $ 3.75 A47837

A47835 Repro Sills used #6 x 3/4 A48676B 28-31 Price Set/38 $ 2.80 A47838

A47836 A47836MB

Seat Adjuster Bolt This special threaded bolt is used to adjust the screw-type adjust- able seat, by moving it backwards or forwards. The seat adjuster nut (A47832N) goes on this. Original Screws will not fit repro. nuts, its best to replace the bolt and nut. 5 1/2" Long. Used on: '30-'31 Cabriolets.

A47832S 30-31 Price Ea. $ 18.95

Seat Adjuster Nut

SPECIALITY CARS SPECIALITY This is the special round nut. Used on: '30-'31 Cabriolets This nut will only fit the repro screw- A47832S.

A47832N 30-31 Price Ea. $ 12.95

Seat Adjuster Washer This washer goes on the head of the seat adjuster bolt before the bolt goes through the bracket at the front of the seat. This washer is made of nylon for smoother operation, not brass like the original. Used with the A47832S. A47835 30-31 Price Ea. $ 1.80

Seat Adjuster Knob This chrome-plated round knurled knob is for the front seat adjustment. Used on: 1930 - May '31 Cabriolet

A47836 29-31 Price Ea. $ 14.35 Spec.64 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts Seat Adjuster Handle Seat Track Assembly This brass chrome-plated style handle Made in the USA. Mount this sliding track assembly with bolts was used on: and spacers provided on top of the seat frame Used on: 1931 Victorias, '30-'31 Cabriolet 1931 400A 1931 Cabriolet 68C. A47836B 30-31 Price Ea. $ 12.95

Seat Adjuster Bracket A321BT 30-31 Price Set $ 52.00 Mounts onto the bottom of the wood frame. This holds the seat adjusting screw Seat Vent Grommet in place, so that seat can be moved Put this steel grommet under the bucket back and forth. Used on: seats on the hard board panel. For 400A. 1930 - Mid 1931 Cabriolets.

A47837 1930 - Mid 1931 Price Ea. $ 26.95 A47906 30-31 Price Ea. $ 2.25 A47836B Seat Adjuster Installation Seat Latch Assembly A70124 This is the bracket for the saw-tooth style seat adjuster. Mount it to the floor under the front of the seat. Used on Victoria, 400A & Cabriolet.

A70126 1931 Price Ea. $ 28.00 SPECIALITY CARS

Seat Spring Clip A70124L This clip holds the adjuster spring on the A70126C A70126 saw-tooth seat adjuster. It screws into the back bottom edge of the front seat assemblies. Used on Victoria. Seat Adjuster Bracket and Nut An "L" shaped bracket that is located on A70126C 1931 Price Ea. $ 11.00 the body cross member and extends up the front seat frame. A47832N is installed. For the screw type seat adjuster. Support Stud Used on: 1930 to mid 1931 Cabriolets. These studs will support the back edge of the bucket style seats that were used on the A47838 1930 - Mid 1931 Price Set $ 51.95 Victoria and 400A's. A70127 30-31 Price Ea. $ 7.00 Seat Adjuster A saw-tooth style seat adjuster. Mounting bracket is at the front of the seat. Mounting bracket to the floor is not included. See Seat Mounting Bracket A70126, A70126C. Used on: This L shaped bracket is for the early 1931 Victoria Victoria's. 1931 400A This 3 holed bracket, which the seat 1931 Cabriolets (68C) hinge goes through is used to adjust the early adjustable seats. Used on both the driver and passenger side. 4 Brackets are required. A70124 1931 Price Ea. $ 63.00 RAR265 30-31 Price Ea. $ 16.95 Seat Adjuster Spring This 6"spring is used with the Seat Hinge Channel saw-tooth style adjuster - A70124. This channel bolts to the seat wood and has a hole in it for the seat hinge rod (A70145) to pass through. For Victoria's & Early Deluxe Phaetons. 16" Long. A70124L 1931 Price Ea. $ 4.40 RAR266 30-31 Price Ea. $ 47.50 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Always Open 24/7 Shop Online at www.mikes-afordable.com Spec.65 Mike's "A" FORD-ABLE Parts Seat Hinge Rod / Nut Seat Armrest Kit This rod/nut is removed to change the seat adjustment This kit gives you both back seat on early Victoria's. The 5/16" threaded rod goes through the floor side armrests for the Victoria's. bracket and hinge channel. 17 3/4" Long.

Temporarily Discontinued A56666PR 28-34 Price Kit $ 76.65 A70145 30-31 Price Ea. $ Rear Floor Pan Spring Hump Cover Seat Hinge Channel Reinforcement Originally Ford used roof material to cover the hump on the rear Used on the Victoria. Use this channel reinforcement on top of floor pan. Used on: the wood above the A70144 hinge channel to secure it to the seat 1931 Victoria wood. 1931 A400

A85456C 1931 Price Ea. $ 4.50

A70146 30-31 Price Ea. $ 19.95 Rear Floor Pan Spring Hump Straps This 4 piece set of metal straps hold the cover A85456C in place Rear Seat Male Catch over the spring hump. This catch is attached to the back seat backrest then secured to the back of the car. Used on all Victoria's & 400A.

RAR220 1931 Price Set/4 $ 23.45 A70147 30-31 Price Ea. $ 18.75

Seat Cushion Dowel Holds seat cushion onto the body subrail so that cushion (springs) will not move. Need 2 per seat. SPECIALITY CARS SPECIALITY A121D 28-31 Price Ea. $ 10.25

Front Seat Swivel Bracket Passenger Side for Victoria & 400A, made from heavy gauge steel, to original specs. Original prints for seat parts specify black enamel for some components and lacquer to match trim on others.

A57697 1931 Price Pair $ 15.00

Seat Track Assembly This is the slide track with 3 seat studs for the Victoria and the A400.

A84842BR 30-31 Price Set/4 $ 57.60

Spec.66 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" FORD-ABLE Parts

SEAT SPRINGS Upholstery

Note: All seat springs are shipped directly from the manufacturer. We do not stock DUE TO THE ENORMOUS SELECTION OF springs. Please make sure you know exactly UPHOLSTERY CHOICES FOR THE MODEL A'S what year and Model you have as the manu- - WE HAVE LEFT THE UPHOLSTERY SECTION facturer will not take springs back. Oversize TOGETHER. shipping charges do apply. 1928 - 1929 has rounded edges and the 1930 - 1931 has SEE PAGE Gen. 220 FOR CABRIOLET squared edges with smaller springs. INTERIOR KITS.

28-29 Cabriolet SEE PAGE Gen. 221 FOR VICTORIA S301 Front Cushion $ 78.25 INTERIOR KITS. S302 Front Backrest $ 61.75 S602 Rumble Cushion $ 64.25 S603 Rumble Backrest $ 83.75 SEE PAGE Gen. 229 FOR CABRIOLET RUMBLE KITS 30-31 Cabriolet - 68B or C S305 Front Cushion $ 76.25 SEE PAGE Gen. 230 FOR CABRIOLET S306-L Front Backrest - 68C $ 83.75 TOP KITS

S306 Front Backrest - 68B $ 61.75 SPECIALITY CARS S606 Rumble Cushion $ 65.00 SEE PAGE Gen. 231 FOR CARPETS. S607 Rumble Backrest $ 83.75

400A S934 Front Cushion - Left $ 48.25 S936 Front Cushion - Right $ 48.25 S931 Front Backrest - Left $ 42.75 S933 Front Backrest - Right $ 42.75 S905 Rear Cushion $ 89.75 S906 Rear Backrest $ 75.60

30-31 Victoria Early Style - January 1930 to June 1931. S930 Front Cushion - Driver $ 42.00 S931 Front Backrest - Driver $ 42.75 S932 Front Cushion - Passenger $ 41.50 S933 Front Backrest - Passenger $ 42.75 S938 Rear Cushion $ 77.25 S939 Rear Backrest $ 121.50

30-31 Victoria Late Style - June 1931 till end. S934 Front Cushion - Driver $ 48.25 S931 Front Backrest - Driver $ 42.75 S936 Front Cushion - Passenger $ 48.25 S933 Front Backrest - Passenger $ 42.75 S938 Rear Cushion $ 77.25 S939 Rear Backrest $ 121.50

Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Always Open 24/7 Shop Online at www.mikes-afordable.com Spec.67 Mike's "A" FORD-ABLE Parts Notes Notes SPECIALITY CARS SPECIALITY

Spec.68 Give us a Call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" Ford-able Parts

124 Model A Drive Order Form Maysville, GA 30558 Phone: (706) 652-3866 Fax: (706) 652-2492 EMail - [email protected] Date: Year & Body Style of Car

Customer Information Shipping Address (if different) No P.O. Boxes

Name Name

Phone ( ) Phone ( )

Address Address

City City

State Zip State Zip

Email Email

Quantity Part # Description Price Total Each Price

Would you like to have a copy of your invoice e-mailed to you? Have your shipping date and tracking information right at your fingertips. Please be sure to print your e-mail address clearly. Total Method of Payment Check or Money Order _____ Visa GA Residents add 7% Tax Tax Master Card Discover See formula in Shipping The Fine Print Acct # Total Expiration Date 3 Digit Security Code / Rear Enclosed Give us a call - 1-888-TRY-MIKE (879-6453) Have an "A" Day! Mike's "A" Ford-able Parts

Quantity Part # Description Price Total Each Price

Sub Total

GA Residents add Tax Tax

See formula in The Fine Print Shipping Total Enclosed Give us a call - 1-888-TRY-MIKE (879-6453) Have an "A" Day!