Manufacturing for Exploration Final Report International Space University MSS Program 2019 This MSS 2019 Team Project work was conducted at the ISU Strasbourg Central Campus in Illkirch- Graffenstaden, France © International Space University. All Rights Reserved The front cover is an original piece created by Lord Jim Tuohy. It is titled ‘Manufacturing for Exploration’. Inspired by the ideas put forward in the report, it encompasses the idea that in-space manufacturing is creating a path to enable human deep space exploration. The Executive Summary and the Final report may be found on the ISU web site at http://www.isunet.edu in the “ISU Team Projects/Student Reports” section. Paper copies of the Executive Summary and the Final Report may also be requested, while supplies last, from: International Space University Strasbourg Central Campus Attention: Publications/Library Parc d’Innovation 1 rue Jean-Dominique Cassini 67400 Illkirch-Graffenstaden France Publications: Tel +33 (0)3 88 65 54 32 Fax +33 (0)3 88 65 54 47 e-mail:
[email protected] Acknowledgments The Manufacturing for Exploration team would like to thank our Faculty Interface Prof. Vasilis Zervos, for expanding our vision for the report. The team would also like to expresses its gratitude to the faculty, Prof. Chris Welch, Prof. Volker Damann, Prof. Taiwo Tejumola, Prof. Hugh Hill, Ms. Danijela Stupar, Prof. Gongling Sun and Dr. Omar Hatamleh, and teaching assistants in ISU Ms. Ana Garduño Baltazar, Mr. Hameed Mohamed, and Mr. James Hurrell, who with their valuable suggestions, guidance, and feedback, helped us immensely to produce the final report. Special thanks to ISU Librarian Ms.