Upcoming Saline-Area Road Construction

Total Page：16

File Type：pdf, Size：1020Kb

2020 Construction WCRC has at least two major projects coming to the Saline area in 2020. Upcoming Textile Road and Woodland Road Roundabout Saline-Area When: June - August 2020 Project Scope: WCRC is excited to partner with Road Construction the City of Saline to build a roundabout at the intersection of Textile Road and Woodland Road on the border of Pittsfield Township and the City of Saline. During the closure, the Saline Recreation Cen- ter and Tefft Park will be accessible via Wood- land Drive. Questions? This project is being funded by a grant from the More projects may be added at a later date. Federal Highway Safety Improvement Program, All dates are tentative and subject to change. WCRC and the City of Saline. Questions? Contact us. Washtenaw County Road Commission Ann Arbor-Saline Road and Phone: (734) 761-1500 Wagner Road Intersection wcroads.org Follow @WashtenawRoads on When: Spring 2020 Facebook and Twitter Duration: The intersection will be closed to all traffic for up to 3 months WCRC will reconstruct the intersection with Washtenaw County Road Commission designated turn lanes and a traffic signal. Phone: (734) 761-1500 wcroads.org Follow @WashtenawRoads on Facebook and Twitter 2019 Construction The Washtenaw County Road Commission (WCRC) has a number of road projects coming to the Saline area in 2019. Learn more about each of these projects and subscribe to receive email alerts about road work by visiting wcroads.org Saline-Milan Road Ann Arbor-Saline Road Saline-Milan Road Resurfacing Bridge Replacement Concrete Repairs When: End of June When: July - September When: Sometime between fall 2019 and spring 2020 Duration: 2 - 3 weeks, weather dependent Project Scope: Saline-Milan Road over the Koch Drain, near the City of Saline city limits Project Scope: Ann Arbor-Saline Road between Project Scope: Saline-Milan Road between Willis Oak Valley Drive and I-94. Road and Judd Road The bridge will be closed to all traffic during construction. Traffic will be required to follow WCRC will replace the damaged concrete Road users, who do not live or own property the posted detour or seek an alternate route. overlay with full-depth concrete pavement in within the project limits, will be required to various locations. The road will be closed to all follow posted detour routes or use another traffic in two different phases. route. Businesses will remain open during The project is funded by the four-year Roads and construction, customers will be able to access Non-Motorized Millage passed by Washtenaw by following the posted detour. County voters in 2016 Saline-Area Chip Seals When: Sometime in July or August Duration: 1 day per road segment Project Scope: Saline-Milan Road between Judd Road and Moon Road AND Textile Road between Ann Arbor-Saline Road and N. Maple Road Chip seal is an important tool to protect new pavement from sun and moisture, extending the life of the road. WCRC crews apply chipseal under a brief road The Saline-Milan Road Bridge will be closure and the road is reopened to traffic the Saline-Milan Road between Willis Road and Judd Road replaced this summer same day. will be resurfaced this summer.

Copy Link

Recommended publications

The Chipseal Process and Why We Do It That Way
The Chipseal Process and Why we do it that way Stephen Van De Bogert Western States Asphalt Standard Chip Seal: Spray Emulsion Binder, Drop the Chips, Roll 3 times, let it cure overnight, Sweep away the excess Key Elements of the Process • Design ( McCleod) • Application rates • Rock Requirements • Rolling • Using Choke • Fogging • The Importance of time, temperature and traffic • Don’t forget the road needs to be prepped and clean Why do a chip seal design before starting • Proper chip embedment is critical to seal success • Too little and we loose rock • Too much and we flush loosing skid resistance • Chip embedment is affected by binder application rate as well as traffic load and road condition. • A chipseal design gives you the right emulsion and aggregate rates • Cuts out the guessing Traffic (Rolling) has huge effect on Binder Volume needed 0.46 Badly pocked, porous, and oxidized ) 2 0.45 0.44 0.43 Slightly pocked, porous, and oxidized 0.42 0.41 0.40 0.39 0.38 0.37 0.36 Slightly porous, and oxidized 0.35 0.34 0.33 0.32 0.31 0.30 BINDER APPLICATION RATE (gal/yd RATE APPLICATION BINDER 0.29 0.28 0.27 0.26 Over 2,000 1,000 to 2,000 500 to 1,000 100 to 500 Under 100 TRAFFIC VOLUME (ADT) Know Your Pavement Condition “Flushed Pavement” vs. “Badly Pocked Porous and Oxidized” and everything in between Won’t absorb any of the binder Will absorb a lot of the binder Project Name: Flora Pit 2011 This Design is for reference only.
[Show full text]
Work Zone Safety & Mobility Implementation Guide
Work Zone Safety & Mobility Implementation Guide April 12, 2021 L O F E A T H S E T A S T E A R T G E E O H F T A L Y L F TR OR OUN N OUR C E VA D A Steve Sisolak Nevada Department of Transportation Governor 1263 S. Stewart Street Carson City, Nevada 89712 Kristina Swallow, P.E. (775) 888-7000 Director www.nevadadot.com 1 List of Acronyms AADT Annual Average Daily Traffic AASHTO American Association of State Highway and Transportation Officials ATSSA American Traffic Safety Services Association CCTV Closed-Circuit Television CFR Code of Federal Regulations CMS Changeable Message Sign DMS Dynamic Message Sign EOP Emergency Operating Procedures FHWA Federal Highway Administration FR Federal Register HAR Highway Advisory Radio HOV High Occupancy Vehicle ITE Institute of Transportation Engineers ITS Intelligent Transportation System(s) MASH Manual for Assessing Safety Hardware MOTAA Maintenance of Traffic Alternative Analysis MOT Maintenance of Traffic MUTCD Manual on Uniform Traffic Control Devices NCHRP National Cooperative Highway Research Program NDOT Nevada Department of Transportation NEPA National Environmental Policy Act PI Public Information PPCBR Portable Precast Concrete Barrier Rail QA Quality Assurance TRB Transportation Research Board TTC Temporary Traffic Control TMA Transportation Management Area TMC Transportation Management Center TMP Transportation Management Plan TO Transportation Operations USDOT United States Department of Transportation 2 Table of Contents List of Acronyms 1.0 Introduction 1.1 Authority 1.2 Purpose 1.3
[Show full text]
Effective Pavement Marking Practices for Sealcoat and Hot-Mix Asphalt (HMAC) Pavements in Texas
Technical Report Documentation Page 1. Report No. 2. Government Accession No. 3. Recipient's Catalog No. FHWA/TX-03/0-4150-4 4. Title and Subtitle 5. Report Date EFFECTIVE PAVEMENT MARKING PRACTICES FOR August 2003 SEALCOAT AND HOT-MIX ASPHALT PAVEMENTS 6. Performing Organization Code 7. Author(s) 8. Performing Organization Report No. Timothy J. Gates, H. Gene Hawkins, Jr., and Elisabeth R. Report 0-4150-4 Rose 9. Performing Organization Name and Address 10. Work Unit No. (TRAIS) Texas Transportation Institute The Texas A&M University System 11. Contract or Grant No. College Station, Texas 77843-3135 Project No. 0-4150 12. Sponsoring Agency Name and Address 13. Type of Report and Period Covered Texas Department of Transportation Research: Research and Technology Implementation Office September 2000 – August 2003 P. O. Box 5080 14. Sponsoring Agency Code Austin, Texas 78763-5080 15. Supplementary Notes Research performed in cooperation with the Texas Department of Transportation and the U.S. Department of Transportation, Federal Highway Administration. Research Project Title: Evaluation of Pavement Marking Effectiveness 16. Abstract This report describes the tasks of research conducted to identify effective pavement marking practices for sealcoat and hot-mix asphalt (HMAC) pavements in Texas. The researchers reviewed literature, determined current Texas Department of Transportation (TxDOT) and alternative pavement marking practices, and evaluated various pavement marking treatments in the field. The researchers identified few shortcomings related to pavement marking practices on HMAC pavement surfaces. However, for sealcoat pavement surfaces, numerous opportunities for improving pavement marking quality were identified. Based on the research findings, numerous recommendations were developed, which pertain to thermoplastic application on sealcoat and HMAC, waterbased paint application on sealcoat, sealcoat aggregates, surface glass beads, and field inspection.
[Show full text]
Line Removal Guide
NZRF LINE REMOVAL GUIDE Rev 3, April 2017 This document is issued by the New Zealand Roadmarkers Federation Inc. with formal endorsement by the New Zealand Transport Agency This document has been developed by the New Zealand Roadmarkers Federation Inc (NZRF). The writer may be contacted with regard to document content by contacting NZ Roadmarkers Federation Inc PO Box 13-605 Onehunga Auckland 1643 Phone 09 625 7470 Email [email protected] INDEX 1 Introduction and Need for the Guide ................................................................................................... 5 2 Scope ........................................................................................................................................... 5 3 Application of the Guide ...................................................................................................................... 5 4 Definitions and References ................................................................................................................. 5 4.1 References ......................................................................................................................................... 5 4.2 Definitions ........................................................................................................................................... 6 5 Line Removal Principles ..................................................................................................................... 6 5.1 Supporting Principles .........................................................................................................................
[Show full text]
Chipseal Road Surfacing
Chipseal Overview Muskegon County Chipseal surface treatment is one of the 2 largest projects that MCRC conducts during 7700 East Apple Avenue • Muskegon • MI • 49442 the year. Chipseal treatments are typically Road Commission done in the early summer months when conditions are optimal. Chipseal Road Surfacing Chipsealing is a process used for pavement preservation and rehabilitation, in which, an asphalt emulsion is placed on a prepared roadway, and immediately thereafter, an aggregate (loose stone) is applied to the roadway, which is compacted to create a revitalized road surface. By comparison to other road surface treatments, chipseal is one of the most economical, and long-lasting options available to MCRC. Service Requests To file a service request, MCRC can be contacted either at our office or by telephone, and your request will be forwarded to the appropriate department; Phone: 231.788.2381 (Press 1) Fax: 231.788.5793 Chipseal Benefits Construction Process Conditions Chip seals are used for restoring skid resistance, Construction Sequence protecting a surface from aging, restoring a running The sequence of construction events is as follows: Chipseal Treatments are typically conducted during surface, eliminating dust, and sealing gravel 1. Project Preparation the summer months, as the asphalt emulsion requires pavements. 2. Surface Preparation warm temperatures and low humidity to be eff ective. 3. Binder Application 4. Aggregate Spreading Taking into account change in weather, cost 5. Rolling eff ectiveness, and traffi c convenience, chipseal 6. Sweeping (Brooming) treatments are generally done in a single day for a given stretch of road. Aggregate Binder Completed Chipseal Benefits •Enhances Traction/Skid Resistance Preparation of the road surface is crucial to ensuring • Cost Eff ectiveness the longevity and eff ectiveness of the chipseal • By Comparison, Chip Sealing is substantially application.
[Show full text]
2020 Street Maintenance Chip Seal Program
2020 STREET MAINTENANCE CHIP SEAL PROGRAM On July 20 – 23, July 27 – 30 & Aug 3 – 6, the City of Missoula will be applying CHIP SEAL to streets Monday – Thursday, 7:00 a.m. – 5:00 p.m. The streets benefiting from chip seal are listed below in What is the City’s Chip Seal Program? the tentative order in which they will be completed. See reverse side for a map of each location. Every year the City’s Street Maintenance Division determines which city streets would benefit the most from a chip sealing treatment to extend the asphalt’s service life. Many factors go into this determination, such as asphalt and sub-base condition. Chip sealing involves Street Location applying layer of asphalt oil sealant and then covering it with a layer of small “chip” rock. This process keeps out moisture and protects the Campus Dr. Entire Length street surface, which helps prevent potholes and extends the asphalt service life. In addition, chip sealing is only one quarter of the cost of Canyon River Rd. Entire Length installing a new asphalt surface, allowing the City to maintain more streets than would otherwise be possible. Anglers Bend Way Entire Length Bandmann Trl Entire Length For more information on the City’s Chip Seal Program, visit our website at http://www.ci.missoula.mt.us/500/Chipseal. Cahill Rise Entire Length Deer Creek Rd. Bridge to South of I-90 Deveraux Pl. Potter Park Lp. to Wilkie St. Diagon Ln. Entire Length If chip sealing is planned for your neighborhood, please note the following: Hermione Ln.
[Show full text]
1 Name Project Area Project Type Length Class Notes
Name Project Area Project Type Length Class Notes Recommendation High priority sidewalk project, consider holding Eaton - Chipseal 14th to South Ave Chipseal 2,800 Collector missing ped infrastructure, bus route, collector without bike faciities. off until full project can happen North Ave Reserve St to Johnson Chipseal 3,700 Collector No recommendation ADA ramps at corners, appropriate parking Ryman - Chipseal Railroad to Broadway Chipseal 1,280 Collector change to parking (45 angled on both sides) spaces. adjust parking as needed add bike lane symbols to bike lanes, piano key Wyoming - Chipseal Russell to California Chipseal 1,065 Collector bike lanes put back, marked crosswalk at California crosswalks at California Mount - Mill & Overlay Hill to Higgins Mill & Overlay 1,400 Collector only a block, one way. right out only at Higgins. No additional infra needed No recommendation get counts - one of only a couple ways across Reserve. Palmer arguably has Union Pacific St - Mill & Overlay Reserve St to Great Northern Ave Mill & Overlay 850 Collector more traffic and no center turn lane. Remove center turn lane and add bike lanes missing ped infrastructure, collector without bike facilities. Facilites across 7th St - Chipseal 7th St from Reserve St to Kemp Chipseal 2,350 Collector Resever though. Future connection? Seek exception to CS policy Mill and Overlay - Prospect Dr from Bridge to is this really a collector? differs even from other hillside collectors in that it Prospect Dr - Mill and Overlay Diamond Meadow Chipseal 1,125 Collector (Local) only connects one way. at least LVB goes to the top of Miller Creek piano key crosswalk at trail Deer Creek - Chipseal Eastside of bridge to south of interstate Chipseal 4,738 Collector (Urban) piano key crosswalk for trail piano key crosswalk at trail Dore Ln - Chipseal Chipseal Dore Ln from Brooks to 39th.
[Show full text]
Black Rock Road Chipseal Surface Treatment Project
Isiah Leggett, County Executive KEEPING MONTGOMERY MOVING Al Roshdieh, Acting Director, MCDOT MCDOT NEWS News from the Montgomery County Department of Trans portation, Division of Highway Services Black Rock Road Chipseal Surface Treatment Project Project to Continue in July; Includes Full -Depth Patching and Chipseal Resurfacing PURPOSE nation, meets the criteria for face, usually in two separate possible detours may be imple- This newsletter is to update you Chipseal resurfacing. Often re- applications (or “coats”), and mented to help minimize incon- on the upcoming roadway repairs ferred to as “Tar & Chip,” provides the roadway with a uni- veniences to the traveling public. and resurfacing of Black Rock Chipseal is a pavement surface form thickness and appearance. Signs will be posted identifying Road, from Darnestown Road to treatment that combines an over- Following placement, rubber such restrictions. Access to resi- Burdette Lane, and to describe lay of liquid asphalt binder and a tired rollers complete the com- dences will be available at all the process. This pavement sys- layer of small gravel. The paction effort until field testing times; however, minor delays tem preservation project employs Chipseal application used on indicates that all relevant specifi- may be experienced as workers long term strategies to preserve Rural/Rustic roads throughout cations have been met. restrict traffic from freshly and enhance the physical and the County will preserve the placed material. operating conditions of the road- pavement structure as well as the Cyclists should proceed with way system as it exists and as- natural, agricultural and historic extra caution when traveling on sures a system serviceable for characteristics of the surrounding freshly applied material, as loose many years.
[Show full text]
What Is Chip Seal? Why Do We Use Chip Seal on County Roads? My
What is Chip Seal? Chip Seal is a pavement surface treatment that is also known as Tar and Stone, Oil and Stone, or Bituminous Surface Treatment. Preservation of Investment is the largest reason Highway Departments utilize this method. The process uses two materials, a liquid asphalt binder (the “tar” or “oil”) and a stone aggregate. A Chip Seal’s purpose is to “seal” the road from water penetrating which can shorten the life span of the road. Any repairs needed to the roadway system are made prior to beginning the Chip Seal process. In most cases, Chip Seals are applied to roads that have recently been repaired and the County is working to preserve the investment and extend the life. Once the road is prepped and ready the binder is applied directly to the existing pavement surface. Immediately following the binder the stone aggregate is applied uniformly across the pavement surface. Large roller equipment follows and compacts the aggregate into the binder. Once the road is reopened to traffic the vehicles driving over the new Chip Seal will continue to embed the stone deeper into the binder providing a more stable traveling surface. After several days/weeks of travel have occurred a road sweeper is used to clean up any remaining loose stone and the new road surface is painted with roadway striping. Why do we use Chip Seal on County roads? Chip Seal is a very cost effective means of Pavement Preservation. It typically costs one fourth to one fifth the cost of a conventional asphalt overlay. Chip Seals can extend the life of a roadway by 5-7 years as well as correct pavement conditions such as surface bleeding (where liquid asphalt leeches out of the pavement), variations to surface texture, raveling (disintegration of pavement due to loss of aggregate), cracks, decreased skid resistance, etc.
[Show full text]
Section 5104.03 Or Any Amendment Thereto
SECTION V. DEFINITIONS For the purpose of this Resolution, certain terms or words are hereby defined as follows: A. The word "person" shall mean, in addition to an individual, a firm, corporation, association, organization, partnership, trust or any legal entity which may own and/or use land or buildings. B. The present tense includes the future tense, the singular number includes the plural, and the plural number includes the singular, unless specifically stated otherwise. C. The word "shall" is mandatory; the word "may" is permissive. D. The words "used" or "occupied" include the words intended, designed, or arranged to be used or occupied. E. The word "lot" includes the words plot or parcel. 5.1 ACCESSORY STRUCTURE: A subordinate structure detached from but located on the same lot as the principal building. 5.2 ACCESSORY USE OR ACCESSORY BUILDING: An accessory use or building is a subordinate use or building located on the same lot on which the main building or use is situated which is customarily incidental to the main use of such building or main use provided that the accessory use does not constitute or become a public or private nuisance, and that the use is not otherwise prohibited by this resolution. 5.3 ACTIVITIES OF DAILY LIVING The set of main functions provided by an Assisted Living Facility such as assisting residents with the activities of dressing, eating, mobility, hygiene, bathing, toileting, using the telephone and shopping; assisting residents with self-administration of medication; preparing special diets other than complex therapeutic diets for residents pursuant to the instructions of a physician or a licensed dietician and will not include permanent skilled nursing care.
[Show full text]
2020 Streets HBP Paving and Chipseal
CONTRACT DOCUMENTS & SPECIFICATIONS for STREETS DEPARTMENT 2020 HBP PAVING AND CHIPSEAL PROJECTS in the CITY OF FORT MORGAN, COLORADO January 17, 2020 Jim Willis Streets Superintendent Streets & Storm Department Steve Glammeyer, P.E., PWE Public Works Director STREETS DEPARTMENT P.O. BOX 100 FORT MORGAN, COLORADO 80701 (970) 542-3987 City of Fort Morgan INVITATION TO BID Streets Department 2020 HBP Paving and Chipseal Projects The City of Fort Morgan is accepting sealed Bids for 2020 HBP Paving and Chipseal Projects until 3:00 p.m. (our clock) on February 20, 2020 at City Hall located at 110 Main Street, Fort Morgan, Colorado 80701. If mailed, the address is PO Box 100, Fort Morgan, CO 80701 and must be in a separate sealed envelope from the shipping package. Bids must be received at City Hall prior to 3:00 p.m. (our clock) on February 20, 2020. Project Summary and Bid Document Information: The following projects generally consist of full width asphalt removal (~3” to 7” deep), installation of flyash subgrade stabilization and installation of HBP on: Project A – East Beaver Avenue: West End – Industry Drive (Industrial Park) Project B – East 9th Avenue: Carol Street – Vicki Street Project C – Carol Street: E. 8th Avenue – E. 6th Avenue Project D – Park Street: W. 7th Avenue - Platte Avenue Project E – Park Street: Platte Avenue - E. Bijou Avenue Project F – Comanche Avenue: Nelson Road – Cheyenne Street Project G – Lowell Place: North of Comanche Avenue Project H – Navajo Avenue: Cheyenne Street – Colfax Street Project I – Landmark Drive: Alpine Avenue – Century Avenue The following projects generally consist of installation of application of polymerized emulsified asphalt, cover coat aggregate called chip seal followed by fog seal (chip seal) on: Project J – Cottonwood Parkway: Riverview Avenue – North End Project K – Osage Avenue: Prairie Place – Cottonwood Parkway Project L – Dakota Avenue: Commons Parkway – Cottonwood Parkway Project M – Commons Parkway: Riverview Avenue – North End Project N – N.
[Show full text]
Update Water System; Update Pads at Picnic Tables/Fire Rings; New Entrance Gate; Update Family Units to Provide Better Experience and Improve Accessibilty
Title StateProjectDescription Buckeye Campground & Hot Springs Reconstruction CA Reconstruct loop for RV sites; update water system; update pads at picnic tables/fire rings; new entrance gate; update family units to provide better experience and improve accessibilty. Improve trailhead. HWY 395 and Buckeye Road Accel/Decel Lane CA Highway 395 is a 65 MPH two lane road. Currently, vehicles turning into the housing compound or warehouse compound have no accceleraon/deceleraon lane, impacng traﬃc paerns. A short secon of Buckeye Road will also be re-aligned. 40GAOA Virgina Lake Restroom Repair CA Complete replacement of roof and two doors, along with replacement of damaged hardware inside the bathroom facility. Replace damaged shingle roof with metal roof for better environmental wear. Would also upgrade to ADA equipment and access. Trail and Kiosk Signs (Carson and Bridgeport) CA & NV Both RD's do not have a complete inventory of signs and kiosks. To gain a better understanding an extensive inventory will be completed to have a better understanding. Mt. Rose and Kit Carson campgrounds pavement rehab CA & NV This project would crack and chip seal pavement within the Kit Carson and Mt. Rose campgrounds. These pavements have been deﬁcient in maint. and this project would extend the pavement life, postponing the need for more expensive pavement replacement. 40GAOA South Fork Salmon River Road Pavement Rehabilitation ID This project would fund a leveling course where necessary and the chipsealing of the enre length of this roadway, decreasing deferred maintenance and ensuring the full lifespan of the exisng surfacing. 0412 Boulder Creek Bridge Replacement ID This project will replace a deficient road bridge.
[Show full text]