POWER FLEXIBILITY ECONOMY

WattStopper lighting control panels offer the convenience of scheduled control combined with the flexibility to suit any application. Lighting Integrator (LI) provides a range of control capabilities built on a common technology platform of low voltage, relay- based control. Contractor panels afford simple, effective control via pre-assembled, easy-to-install packages.

LIGHTING CONTROL PANEL SYSTEMS IN THIS SECTION:

Product Line Introduction B1-B6

Product Matrix B7-B8

Complete Control Level B9-B26

DMX512 Interface Level B27-B32

Native BACnet Level B33-B42

Low Voltage Switching Panel B43-B46

Accessories B47-B70

Contractor Panels B71-B78

Emergency Lighting Controls B79-B86

Services B87-B88

B1 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS

www.wattstopper.com B2 800.879.8585 NUMEROUS CONTROL CONFIGURATIONS

With WattStopper’s Lighting Integrator (LI) lighting Lighting Integrator Technology Highlights control panels, users can implement the control Industry-exclusive heavy duty relay capabilities they need for their specific applica- Mechanically latching HDR heavy duty relay, tions. Lighting Integrator simplifies integration with rigorously engineered with 14,000 Amp Short Circuit external controls, whether these are other building Current Rating. The relay meets NEMA inrush systems or other lighting control devices. Lighting current requirements for controlling electronic Integrator is a solution that works today and well ballast lighting loads, and is rated a minimum into the future. 300,000 cycles.

LI offers a technology platform that accommodates Optional integrated control of emergency lighting several different control configurations to suit virtu- ally any application. Provides coordinated control of emergency lighting along with normal lighting. Available in most LI

LIGHTING CONTROL PANEL SYSTEMS From basic low voltage switching to sophisticated control confi gurations, this option affords fail-safe PC-based control, LI has a configuration to meet emergency lighting operation for most common every user’s needs. applications, and allows integrated control via schedule, switch, photocell, or other control device.

Unique Smartwired switching

Simple pushbutton functionality allows users to quickly group relays for common on/off or pattern (scene) control.

B3 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS

Inputs for Programmable Group Switching of Relays • Channel status LEDs • Pilot light outputs • Override pushbuttons • Switch and sensor inputs HDR Relays

Relay Driver Cards • Relay status LEDs • Pilot light outputs • Override push buttons 24 Volt Power for Sensors • Switch and sensor inputs and Accessories

Intelligence Card Options

Input Options • 115/277 Volts • 115/347 Volts Accessory DIN Rail • 240 Volts • Holds up to two low voltage accessory/automation modules

www.wattstopper.com B4 800.879.8585 BRINGING ENERGY SAVINGS TO COMMON APPLICATIONS

Educational Retail

„ Supplement daytime scheduled control with „ Achieve code compliance without burdening afterhours occupancy-based control managers with additional responsibilities

„ Add daylighting capabilities for classroom „ Increase energy savings by integrating lighting, lighting HVAC, and security systems

„ Event Scheduler for convenient scheduled „ Maintain security by easily adjusting exterior control of academic and athletic events lighting schedules to provide secure environments LIGHTING CONTROL PANEL SYSTEMS

Office Buildings Public Spaces

„ Integrate with other BACnet manufacturers’ „ Use trending and analysis to reduce energy equipment for seamless control consumption

„ Provide personal desktop control „ Enable multiple-user access simultaneously

„ Comply with mandated automated lighting „ Simplify administration with PC based touch- shutoff code requirements screens and animated floor plans or virtual control panels

B5 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS

www.wattstopper.com B6 800.879.8585 PRODUCT MATRIX

Public area with Areas with irregular occupancy Building Space Type predictable patterns or sensors occupancy pattern mandated by codes

Lighting Control Strategy Lighting will be

Primary Scheduling Function Lighting control panel will provide its own automation and scheduling

Flexible programming with a PC and Flexibility via remote Application software. The application can be any size, including large and complex facilities, programming or PC from 1 to 500 panels based automation LIGHTING CONTROL PANEL SYSTEMS

LIC: Refer to DLM Lighting Integrator Platform Lighting Integrator panel options Complete Control

P. B11-B26

Applications that demand Extensive capabilities are advanced scheduling, reporting available using the Digital and usage monitoring benefit Lighting Management LMCP from the sophisticated control panel, which incorporates key capability of LI Complete LI technology and combines it Control. From the convenient with the flexibility and scalabil- administrative and operating ity of the DLM technology capabilities of WinControl platform. software to the range of control options, Complete Control is Visit the DLM section of this cost effective for any size guide for more information, application from a single particularly the LMCP product standalone panel up to a cut sheet on P. A31-32. maximum of 500 panels on a digital network.

Services Comprehensive services include design, startup, onsite training P. B87-B88 and troubleshooting as necessary.

B7 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS

Use Occupancy Sensor

Controlled by Relay Panel

Lighting control Another system will provide the automation does not need and scheduling of lighting control automation and scheduling

Theatrical system will provide BAS will provide the No scheduling and programming; the automation and control automation and scheduling remote control with low voltage with DMX512 through BACnet switches only

LID: LILM: LI:

Lighting Integrator Lighting Integrator Lighting Control with DMX512 connectivity with native BACnet P. B43-B46 P. B27-B32 P. B33-B42

In theatrical applications, In applications where When the application such as auditoriums and administrators prefer to demands flexible remote theaters, controlling all coordinate control of building control of lighting circuits, a lighting from a single lighting systems directly basic LI panel offers robust system ensures coordina- from a building automation control paired with flexibility. tion of house and work system, LILM panels enable Exclusive HDR heavy duty lighting with theatrical easy integration of lighting relays ensure reliable lighting cues. LID panels controls with industry performance while compat- enable this, while the LIDA standard BACnet based ibility with a wide range of panel option offers the systems. low voltage switches, flexibility afforded by the occupancy sensors and use of dataline switches. daylighting sensors offers control flexibility.

www.wattstopper.com B8 800.879.8585 LIGHTING INTEGRATOR COMPLETE CONTROL LEVEL

Applications that demand advanced scheduling, reporting and usage monitoring benefit from the sophisticated control capability of LI Complete Control (LIC). From the convenient yet comprehensive administrative and operating capabilities of WinControl software to the range of control options, Complete Control is cost effective for any size application from a single standalone panel up to a maximum of 500 panels on a digital network.

When local dataline control capabilities are desired, such as the convenience of programmable switch buttons or distributed control options, LI Complete Control offers options for the use of digital dataline switches. LIGHTING CONTROL PANEL SYSTEMS

LIC HIGHLIGHTS „ Advanced lighting control scenarios: time delay override, common area with egress timer, intelligent switch scenarios, load shed, daylight switching, cleaning function „ Distributed control and communication for up to 500 networked LI panels „ Connectivity via direct RS232, or via WebLink TCP/IP or BACnet/IP „ Programmable dataline switches for flexible user override „ Comprehensive usage, trending and alarming capabilities

B9 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS

B10 CHOOSE LI COMPLETE CONTROL LEVEL FOR THE MOST DEMANDING APPLICATIONS

In settings where the flexibility and convenience of PC-based control is desired, the Lighting Integrator Complete Control (LIC/ LICA) configurations offer advanced scheduling, reporting, and monitoring. Cost-effective for any size application, LIC systems can range from a single standalone panel to a maximum of 500 panels on a digital network.

Designers can choose from a wide range of control options, such as ambient light level

LIGHTING CONTROL PANEL SYSTEMS based control of exterior or interior lighting via HPSA series analog photocells (page B25-26). LIC panels work with standard low voltage wall switches and occupancy sensors. Use WebLink (page B23-24) for remote TCP/ IP connectivity for WinControl, a web browser user interface for override and monitoring and BACnet integration with building automation systems. WebLink also offers an optional Event Scheduler.

B11 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS SYSTEM LAYOUT

Optional Fiber Optic Link

Optional Low Voltage Local Wiring Dataline (4-wire)

HPSA Analog Photocells Connectivity Connectivity Options Options

RS232 Direct Dataline Connection Switches

Data Communications Link Offers user-friendly, Connects PC with WinControl WebLink Windows environment in to LI panel network via global Enables multi-user and browser- full-featured administration dataline based access to LI panel network. software Integrates an LI network with any BACnet compatible system Provides graphical user interface for visual system control, real time monitoring and operation

Monitor/control TCP/IP capabilities with Remote browser Connection Monitor/control/program capabilities with WinControl

B12 LI Complete Control Level Interior (LIC8, LIC24, LIC48, LICA8, LICA24, LICA48) Priority array based logic engine for simple execution of complex Distributed processing architecture control scenarios with robust 2-wire digital network communications

Compatible with legacy Complete scheduling, monitoring, Complete Control systems and reporting capabilities via exclusive WinControl software

PROJECT

LOCATION/TYPE

Product Description Operation

Overview The WattStopper Lighting Integrator Complete Each LIC panel stores the user generated pro- Control (LIC) system is a full featured networked gramming in non volatile memory housed within control system that provides the maximum flex- the Complete Control intelligence card. This ibility for lighting control by providing both panel controller monitors all inputs and uses a unique based and distributed load control options. A priority array based logic engine to generate the LIGHTING CONTROL PANEL SYSTEMS digital communication bus allows user program- appropriate load response (relay control) based ming generated at the WinControl workstation on simple or complex combinations of input trig- to be transferred to the panels where it runs gers that can include schedules, override switches, autonomously. Once loaded into the panels, the occupancy sensors, photocells and signals from lighting automation features operate without the other building systems. need for an online PC. This distributed processing capability ensures a high degree of reliability. LIC LIC features a library of scenario based control incorporates all the base features of the Lighting schemes that provide powerful control options Integrator hardware platform including the HDR without the complexity of low level user program- mechanically latching, heavy duty relay. ming. These control scenarios include provisions for common area logic with egress, cleaning crew LICA panels, with local dataline support, provide overrides, load shed, force on, force off, blink local Dataline Switch functionality. warn, and after hour time delay.

Features • Network up to 500 panels via open topology • Generate detailed documentation reports of all digital data bus aspects of system hardware and software via • Create user programming offline using WinControl software WinControl software and transfer to panels • Programmable analog inputs provide multiple • Import site documentation from WinControl set points for photocells or other analog devices Designer project design and documentation • Programmable dataline switches connect to software panel with 4 wire open topology digital data bus • Programmable group codes with scenario • Provides full support for WattStopper AS series

System & Enclosures based logic provide system-wide control Automatic Wall Switch • Powerful data logging feature with manual and • Remote network supervision and programming automatic log transfer to PC via TCP/IP connection using optional WebLink • Option for seamless building system integration device using BACnet protocol • Qualifies for use on ARRA-funded projects • Supports WattStopper occupancy sensors B13 www.wattstopper.com directly without power packs 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS System & Enclosures B14 Analog photocell 800.879.8585 Optional Local Dataline Complete Control Cards Dataline Switches www.wattstopper.com | Local Dataline (4-wire) topology allows linear, star, and T configu- linear, star, allows topology addresses HDLS series switch rations, 63 length (LICA dataline, 1500’ max available per option) high/low time set with individual high set/low delays automatically con- and group switch channel, sensor operation figure for occupancy for any Class 2 voltage channel, configurable • twisted, open two pair dataline, local Optional • per panel, points, 32 maximum Analog set • inputs, one each per relay Direct wire switch • per relay and group switch Pilot light output • rail mounting for automation modules DIN • warranty UL listed, one year Global dataline (2-wire) PC WinControl LIC LIC LICA link Sensor Data Occupancy Comunications size interiors SPST, HDR series, latching WattStopper require- NEMA electronic ballast meets new integral Amps SCCR, with ments, 14,000 manual override allows linear, star,shielded, open topology for panels/con- and T network configurations nectivity 4000’ max length for PC or WebLink andtion to digital dataline operation visual indication of system provided per group4 VDC input, 8 inputs switching card Dataline Power Supply Note: Dataline power supply required in one panel only. Panel System Layout and Configuration • 24, or 48 relay 8, provide configurations Panel • replaceable relay, individually Standard • one pair twisted and Digital network dataline, • provides RS-232 connec- Network link device • source provided, 0 – Analog input, 12 VDC LIC LIC Layout LIC System Specifications B15 System & Enclosures LIGHTING CONTROL PANEL SYSTEMS Information 800.879.8585 www.wattstopper.com General LI interior to facilitate project rough-in requirements. interior tofacilitateprojectrough-inrequirements. and coverareshippedseparatelyfromthepanel the appropriateenclosure.TheLIpanelenclosure called forontheorder.Theinteriormountsinto capacity withthequantityofrelaysinstalledas interiors areconfiguredas8,24or48relay voltage, relaybasedlightingcontrolpanel.Panel WattStopper’s LightingIntegrator(LI)isalow Description • Two slots available for optional automation, Twoslotsavailableforoptionalautomation, • Integralpushbuttonoverride,statusLED,and • Individualplug-in,latchingstylesinglepole • Interiorprovidescompleteisolationbetween • devices for remote control of relays. devices forremotecontrolofrelays. blocks allowconnectionofdirectwiredlowvoltage associated witheachrelay.Removableterminal driver circuits,whichareannunciatedbyanLED provides positivestatusfeedbacktotherelay each buttonpress.Anisolatedcontactintherelays each relaytomanuallytoggletherelay’sstatewith cards. Amomentarypushbuttonisprovidedfor via a24voltDCpulsegeneratedbytherelaydriver LI relaysaredriventoalatchedonoroffposition Operation networking andintegrationcontrolcards pilot lightoutputperrelay HDR relayswithisolatedpilot/statuscontacts enclosure (LENC) line andlowvoltagewhenusedwithanLI eight by switching only). eight byswitchingonly). a totalof16channels(8controllablebyscheduling, 48 sizepanelscanhavetwogroupswitchcardsfor be orderedwithonegroupswitchcard(8channels), occupancy sensors.Aneightor24sizepanelcan and terminalsforconnectionofwallswitches with anoverridepushbutton,LEDstatusindicator control. Eachoftheeightchannelsisprovided for commonon/offcontrolorpattern(scene) assigned quicklytoeachgroupswitchingchannel allows anyquantityofrelaysinapaneltobe switching, isasimplebuttonpressinterfacethat Group switching,alsoreferredtoasSmartwired Group Switching WattStopper occupancysensorsareconnected. will automaticallyconfigureappropriatelywhen The switchinputcircuitsareautosensingand or momentarythreewiretwoinputs. Inputs canbewiredtoaccommodatemaintained • Optional configuration available for use on Optionalconfigurationavailableforuseon • Controlmulti-polecircuitswithoptional • DINrailmountingprovidedwithintheClass2 • Smartwiringfeatureallowsgroupingofrelays • SupportsWattStopperlowvoltageoccupancy • Operation (cont’d.) emergency lightingcircuits contactors andcompatibleLENCenclosure section formountingofoptionalaccessories for commoncontrol power packs sensors withoutneedforseparatesensor LIGHTING CONTROL PANEL SYSTEMS System & Enclosures B16

35.75" 90.80 cm ___ DP dataline ___ DP power supply (one required per each network) Dataline Power Supply 800.879.8585 14" 35.56 cm 48 relay 115 240 277 347 interior capacity www.wattstopper.com | 23.37" 59.37 cm with HDR Heavy Duty Relay Heavy with HDR and pulse OFF 24 VDC, pulse ON - Coil voltage, replaceable individually with external power supply voltages configurable ___ EM relay count (Not available in 8-relay size panels; max. of 24 in 24-relay or 48-relay size interior) • SCCR (short circuit current rating) 14,000 amps 14,000 rating) circuit current (short • SCCR relays: • HDR SPST contacts Mechanically latched - LV plug-connection, ½” K,O, mounting, - - Contact ratings 30 amps ballast @ 277V 20 amps ballast @ 347V 20 amps tungsten @ 120V 30 amps resistive @ 347V 300,000 mechanical cycles - Endurance: 1.5 HP @ 120V • 24 V rectified or 24VAC, other Pilot light output, • year warranty One 14" 35.56 cm 24 relay interior capacity ___ GS cards (max 1 in 8, 24, 2 in 48) 10.5" 26.67 cm ___ HDR relays installed (max of interior capacity) 13" 115/277 115/347 240 8 relay 33.02 cm interior capacity LIC8 LIC24 LIC48 LICA8 LICA24 LICA48 60 Hz, 240V 50 Hz 60 Hz, 240V One card max per LI8 andgroup switching card. LI48. LI24. Two cards max connection, configurableblocks with tool-less two wire momentaryfor three wire momentary, maintained dry contact(toggle), and two wire occupancy sensors. switches or WattStopper 24VDC • Interior capacity: • Interior 8 SPST relays - 24 SPST relays - 48 SPST relays - • 60 Hz, 120/347V options, 120/277V Input voltage • eight channels per installed Group switching, • inputs, removable terminal Low voltage switch available • Accessory power MA @24VAC or 800 MA @ 24VDC - LI8: 1000 - LI24 and LI48: 1400 MA @ 24VAC or 800 MA @ Interior Capacity Voltage Options Relay Count Group Switch Card Emergency Relays Coil Voltage Capacity Voltage Options Relay Count Group Switch Card Emergency Relays Coil Installed Options 21906 rev. 5/2013 Ordering General LI LI General Dimensions Information Pub. No. Specifications Panel Interior WinControl Software for LI Complete Control

Windows-based control System management and automation for Lighting and administration Integrator Complete Control panels

Design, layout and document lighting control projects Panel programming off- or online

Simulator function for training Detailed activity logs, runtime purposes reports, and graphs

PROJECT

LOCATION/TYPE

Product Description System Reports and Analysis Overview WinControl Software provides PC-based WinControl provides comprehensive monitoring automation and control for WattStopper Lighting and reporting capabilities, including reports Integrator Complete Control (LIC and LICA) panel for documenting control system devices and systems. The integral design program, WinControl schedules. It generates activity logs, exception Designer, can layout and document lighting control reports and run-time graphs that can be used for

LIGHTING CONTROL PANEL SYSTEMS projects, and produce CAD-ready diagrams in DXF trend analysis or to track actual lighting usage format. (down to the individual relay level, if desired) and evaluate energy costs. The software can also verify that the system is operating as intended, or Operation identify and diagnose potential concerns. WinControl provides a user interface for programming, monitoring and controlling Applications functions for LIC panel networks. Administrators can use the software to program control schedules Facilities with multiple LIC panels, such as office off-line, and then execute updates with a simple building campuses, convention centers, airports, command. Once programmed using WinControl, arenas and large commercial facilities are the panels execute control scenarios, including ideal settings for lighting control management scheduled off with blink warning, time delay via WinControl. Capable of automating and overrides with blink warning, or automatic daylight controlling all types of interior and exterior switching with occupant interlock/override. lighting applications, WinControl is also adept at Administrators can configure password-protected administration down to the relay level. Operators security settings to specify users with authority can tailor lighting control to building and to change programming or documentation, and occupant activities on a daily or weekly basis with execute control functions. Online operation programmable holiday and exception schedules. enables users to control individual relays or make immediate changes to scheduled operations.

Features • Explorer-like view of all system components • User-programmable override and time delays • Remote operation capabilities via modem • Full support for AS-100 Automatic Control Switches network or TCP/IP connection via WebLink • Program panels for HPSA Analog Photocell

Networking & Software • Design export to DXF format with output, operation with up to 32 setpoints including single line riser diagram, panel • Configure panels for varied occupancy sensor schedules and specification summary behavior to check occupied and unoccupied periods • Weekly scheduling with holiday and astronomic • Qualifies for use in ARRA-funded projects control B17 www.wattstopper.com • Designer wizard creates lighting control project 800.879.8585 layouts LIGHTING CONTROL PANEL SYSTEMS Networking & Software B18 800.879.8585 www.wattstopper.com | 800x600 resolution panel network connect PC to LIC required to Monitoring and trend analysis are enabled by reports such as these runtime and runtime exception reports. • color, minimum Requirements: 16-bit Monitor • (HLINKCC) Link Data Communications Users set up weekly schedules, modify daily events, and specify actionsUsers set up weekly schedules, modify daily events, for weekends and holidays on this scheduling screen. Lighting Integrator Data Communications Link (required for PC connection to LI dataline) WinControl Software for Lighting Integrator Complete Control 250-relay system WinControl Software for Lighting Integrator Complete Control 500-relay system WinControl Software for Lighting Integrator Complete Control 750-relay system WinControl Software for Lighting Integrator Complete Control unlimited-relay system HLINKCC WCHSTD250 WCHSTD500 WCHSTD750 WCHSTDUL Catalog No. Description Documenting, programming and controlling panel relays is simplified with point and click screens and drop down menus. Documenting, programming and controlling panel relays is simplified with point and click screens and XP Professional disk space MB free hard Real time load report graph provides administrator with a snapshot of lighting system usage. Additional networking component: Users can select reports from a browser- like screen. • Business and with Windows Vista Compatible • RAM, CD-ROM, 100 256 MB PC Requirements: Sample Reports Ordering WinControl Information Screens and Screens and Specifications Pub. No. 10508 rev 10/2013 WinControl Graphics for LI Complete Control

Graphical enhancement Real time programming to standard WinControl and monitoring software

Status, documentation, and programming data for Facility-specific on-screen each system device system graphics

Multiple site graphics on single screen view Supports multiple graphics peripherals and file formats PROJECT

LOCATION/TYPE

Product Description Customized Graphical Displays

Overview An optional package for WinControl Software, WinControl Graphics allows users to create WinControl Graphics provides capabilities for and modify graphic displays for customizing the on-screen system programming changes, real application and to view system lighting status on time monitoring and operation in a graphical screen in real time. Typically, a floor or building LIGHTING CONTROL PANEL SYSTEMS environment. It functions with WattStopper plan, map, photograph or similar graphic is Lighting Integrator Complete Control (LIC) panel imported to create a custom control screen so systems. that users may easily identify lighting zones. Customized lighting control buttons are associated Operation with the graphic so that a lighting operation can be turned on or off via a simple mouse click. Users WinControl Graphics works seamlessly with can accommodate multiple graphic displays on a WinControl. All panel, load, and scheduling data single screen, enabling them to conduct system entered in WinControl is automatically shared and administration on different sites from a single available for access from within the WinControl location. Graphics environment, eliminating duplication of data input. The customized graphic screen displays Applications enable system administrators to instantly identify the status of specific devices, or control the system For large, complex facilities, such as convention with ease (e.g., turn individual lamps or relays on centers, airports, stadiums, or high-rise office or off using a simple mouse click). WinControl buildings, WinControl Graphics offers a versatile, Graphics also supports multiple graphic file user-friendly system administration tool. formats so users can easily import graphics from other applications to customize displays.

Features • Multiple site graphics on single screen view • Supports BMP, WMF, JPEG, AVI, PCX, DCX • On-screen simulation of system operation graphics file formats • Point and click control of individual relays or • Zoom, resize, and scroll capabilities for easy maneuverability

Networking & Software groups of relays • Displays system activities in context of specific • Screens and control buttons may be tailored to building plans individual requirements • Qualifies for use in ARRA-funded projects

B19 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS Networking & Software B20 800.879.8585 www.wattstopper.com | 800x600 resolution panel network connect PC to LIC required to Users can customize graphic displays to streamline system administration. Customized Graphical Displays WinControl Graphics Run Mode WinControl Graphics The run mode enables users to see programming changes on-screen and in real time. • color, minimum Requirements: 16-bit Monitor • (HLINKCC) Link Data Communications WinControl Software for Lighting Integrator Complete Control Lighting Integrator Data Communications Link (required for PC connection to LI data line) WinControl Graphic Software for Lighting Integrator Complete Control 250-relay system WinControl Graphic Software for Lighting Integrator Complete Control 500-relay system WinControl Graphic Software for Lighting Integrator Complete Control 750-relay system WinControl Graphic Software for Lighting Integrator Complete Control unlimited-relay system HLINKCC WCHSTD WCHGR250 WCHGR500 WCHGR750 WCHGRUL Catalog No. Description per graphic screen, CD-ROM, 100 MB free screen, CD-ROM, per graphic graphic screen space plus 1.0MB per hard disk XP Professional Required software package: Additional networking component: Multiple site graphics are accessible on a single screen. Graphic screens accurately display fixtures, switches, andGraphic screens accurately display fixtures, switches, other system devices and their on/off status. • RAM plus 1.0 MB 512 MB PC Requirements: • Business and with Windows Vista Compatible Multiple Site Viewing on Single Screen Multiple Site Viewing on Single WinControl Graphics System Screen WinControl Graphics System Sample Screens Graphics Ordering WinControl Information Pub. No. 10607 rev 10/2009 Requirements Data Communications Link for LI Complete Control

PC connection to a Industry standard RS232 connection Lighting Integrator panel network

Alarm contacts

Ensures all individual panel clocks are synchronized LED status indicators

PROJECT

LOCATION/TYPE

Product Description Networking Overview The Data Communications Link (HLINKCC) pro- The Data Communication Link enables PC control vides the connection between a PC and an LIC/ and automation of networked LIC or LICA panels. LICA network. It enables PCs running WinControl Multiple units can be used on an LI panel network software to communicate to multiple panels linked to provide multiple operator stations or as portals LIGHTING CONTROL PANEL SYSTEMS together. to other building control systems.

Operation Administrators may select from additional networking options. For remote access via tele- The Data Communications Link interfaces PCs phone lines, the LI modem option (HMODEM) with the panel network. It connects at any point may be selected, which connects to the Data on the shielded, twisted pair communications Communications Link. If multi-user access to the wire. The device enables all the lighting control panel network is desired via TCP/IP or the internet, panels in an LIC/LICA system to be programmed the WebLink appliance (WL-BASE) can be added. and monitored from a computer using WinControl software. It also provides notification of failed field devices or relays, including a failure in the Data Communications Link itself via an LED and a set of relay contacts. The Data Communications Link is connected to a PC using the cable (HCABLE-C).

Features • System synchronization clock with automatic • LED status indicators for power, online, and daylight savings and leap year adjustment data activity • Alarm contacts and LEDs to annunciate failed • Terminals for connection to global dataline devices Networking & Software • Qualifies for use in ARRA-funded projects

B21 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS Networking & Software B22 To panels To 800.879.8585 Complete Control Card Other panels wire (HDLW2) wire To panels To data communications Shielded single twisted pair (02) Second Floor wire (HDLW2) wire www.wattstopper.com | Link Data Lighting Integrator Panel data communications Shielded single twisted pair Communications Shielded single twisted pair data communications wire (HDLW2) data communications wire • kg.) weight: 3 lbs. (1.36 Shipping • and CUL listed UL • warranty One year Complete Control Card Link Cable Data RS 232 HCABLE-C Communications (01) First Floor Option Lighting Integrator Panel WL-BASE WebLink Cable RS 232 HCABLE-C Data Communications Link with 115V power supply for LI Complete Control WebLink Appliance Shielded single twisted pair data communications wire WinControl software RS232 connection cable Data Communications Link HCABLE-C Cable Ethernet RS 232 Other panels HLINKCC WL-BASE HDWL2 WCHSTD-xxx HCABLE-C maximum LIC panel network with PC connection via Data Communications Link LIC panel network with PC connection via Data Communications Communications components for multi-user LAN, WAN or internet connections Communications components for single-user connections. Catalog No. Description • port communications RS232 serial auto baud • 300/1200/2400/4800/9600/19200 • and 2 mA rated at 28 VDC Alarm contacts • power supply 115 VAC plug-in transformer Additional networking components and options: Data Communication Link Applications Networked System Layout Networked System Options Ordering Networking Information Specifications Pub. No. 18907 rev 5/2013 System Layout WebLink Network Appliance for LI Complete Control

IP connectivity to Lighting Multi-user access for those Integrator panel network using WinControl software

Set up control schedules Integrate with BAS system through Web browser interface via BACnet protocol

PROJECT

LOCATION/TYPE

Product Description WebLink Scheduler Software

Overview The WebLink Network Appliance is one option for With optional WebLink Scheduler Software, users connectivity between a standard IP network and a can employ their browser instead of WinControl to Lighting Integrator (LI) panel network. It enables schedule a full calendar. Annual, monthly, weekly multiple users to access and control a network and daily calendars are displayed to multiple PCs LIGHTING CONTROL PANEL SYSTEMS of LI Complete Control (LIC) panels from any as web pages. Users can set up new events for any location on an Ethernet network (e.g., LAN, WAN time period by selecting a specific date, time and or internet). Optional WebLink Scheduler Software action, or easily perform modifications of one-time provides scheduling capabilities via a standard or recurring events. Schedule templates enable web browser. Optional My Lights Software offers creation and storage of alternative schedules for personal lighting control via individual desktop special events that need unique lighting scenarios, PCs. Optional BACnet Integration exposes relays an ideal feature for convention and multiuse and group codes as BACnet objects. centers, stores and arenas.

Operation My Lights Software

WebLink connects to and automatically maintains Optional My Lights software offers personal space communications directly with a LIC network lighting control via desktop PC. In its manual through a Data Communications Link (HLINKCC) mode, My Lights provides users with on/off control serial connection. The WebLink provides web via a display on their PC. In automatic mode, My browser-based access to panels on the network Lights maintains space lighting by monitoring PC for viewing panel status and overriding relays. It mouse and keyboard activity; when activity ceases, allows panel network connectivity to be shared My Lights turns lighting off after a preset interval among multiple user connections for simultaneous initiated by a blink warning. Users may override access, providing an IP connection to other this automatic off with any mouse or keyboard installations of WinControl software on remote movement. PCs over a dedicated or enterprise LAN or WAN.

Features • Enables IP network connectivity to LIC panel • Labels and descriptors of LIC network devices network for multiple users via WinControl (i.e., relays, switches) automatically synchronize with WinControl for easy device selection Networking & Software • Compatible with legacy CC panels • Provides connectivity with BAS systems using • Configurable for DHCP services or static IP industry standard BACnet protocol address • Qualifies for use in ARRA-funded projects • Optional shelf for rack mounting

B23 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS Networking & Software B24 800.879.8585 Other panels (02) Second Floor Lighting Integrator Panel www.wattstopper.com | Individual users can access this control display from desktop PCs launched from a simple applet in the Windows system tray. My Lights 215.9 mm x 63.5 mm) W x H x D mm) W mm x 63.5 215.9 Cards

Global dataline (2-wire) • kg) weight: 3.2 lbs (1.45 Shipping warranty • One-year CompleteControl (01) First Floor Lighting Integrator Panel RJ-45 Ethernet WebLink v2 Network Appliance with AC adapter WebLink Scheduler Software (browser-based) My Lights Software for personal desktop PC control and override Black Shelf for rack mounting up to 50 lbs., 5.25”x17.25”x12.13” (133.4mm x 438.2mm x 308.1mm) HxWxD UPS backup for WebLink LAN/WAN

Other panels Data WebLink Link (HLINKCC) Communications or browser WL-BASE WL-OPTSCHED WL-MYLIGHTS WL-RACKSHELF WL-UPS WinControl users connection to HLINK connection BACnet™ WebLink’s main scheduler screen shows recent actions on the LI network, actions scheduled for the day, and quick links to alternate views. LIC WebLink Panel System with • connector Ethernet LAN 10/100 RJ45 • (190.5 mm x 7.5” x 8 .5” x 2.5” Dimensions: • 100~240 V) (AC Adapter: Input AC Includes • - for and Serial DB9 connector USB port Catalog No. Description Main Scheduler Screen Options WebLink Ordering Information Specifications System Layout Pub. No. 19107 rev 9/2013 Analog Photocell for Lighting Integrator Complete Control

Color-coded Class 2 Calibration remote from connection to panel sensor (compliant with CA Title 24 requirements)

All adjustments made via Three application-specific WinControl software models for easy selection

PROJECT

LOCATION/TYPE

Product Description Operation Overview Analog series photocells provide ambient light Analog series photocells are powered by Class 2 level measurements to Lighting Integrator DC voltage supplied from any input terminal on Complete Control (LIC) panels, enabling flexible, a Group Switching card installed in an LIC panel. multi-setpoint control of lighting. The outdoor The photocells return a DC signal to the panel LIGHTING CONTROL PANEL SYSTEMS model, HPSA, is completely weatherproof and in proportion to the amount of light striking the equipped with a hooded lens to help protect photocell lens. No adjustments are needed at the against snow and glare. Indoor models include the photocell head. Powerful WinControl software nor- HPSA-S for mounting in skylights, clearstories and malizes the photocell signal and provides an easy atriums, and the HPSA-I, which is ideal for daylight user interface, permitting setup of lighting control shed applications and is mounted on the scenarios based on footcandle level setpoints. Two ceiling or wall. modes allow for basic applications where default settings produce the desired control. An advanced Applications mode allows the setpoints, time delays and dead- band to be fine-tuned for more sophisticated The outdoor model HPSA is typically mounted application requirements on the building roof facing north. The HPSA pro- vides exterior ambient light level information to the LIC panel where one or more setpoints have been established to control exterior lighting. The skylight model HPSA-S is designed to be compat- ible with the high light levels encountered near the glass in skylights, atriums and clearstories. Typically, the HPSA-S will provide light level infor- mation to the panel and be used to hold off/shed unnecessary interior lighting during bright daylight hours. The HPSA-I is also used to shed interior lighting in response to daylight, but is designed to operate in the relatively low ambient light levels present at the ceiling in interior rooms. Services & Components Features • Exterior and skylight models provide flexible • Interior model mounts simply, without tools, mounting options via ½” threaded conduit fitting using the provided peel and stick adhesive • No calibration or adjustments required at the • Color-coded flying leads and matching color- photocell location; all setup done in software coded terminals in panel simplify installation B25 www.wattstopper.com • Qualifies for use in ARRA-funded projects 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS Services & Components B26 Y R B W Y R W B Y R W B Option Vertical adhesive Orientation Y R W B ® Y R B W Y B R W 800.879.8585 Y R B W Y W R B ABCDEFGH Wiring Terminals Wiring Terminals Well Skylight 0 - 200 FC 0 - 500 FC 0 - 6000 FC Group Switching Card inside LI Panel Card Switching Group Sensor HPSA-S Class 2 wiring Class www.wattstopper.com | #20 AWG up to 250 feet up to #20 AWG Y R B W HPSA-S Skylight Wiring HPSA-S Skylight Y R W B pad Y R W B • Mounting: ½” NPT x .69” stem; and HPSA-S: HPSA stem with 3M : 0.5” x .64” HPSA-I • stabilized plastic Housing: UV • Dimensions: x 1.28” diameter HPSA: 2.25” x 2.00” diameter HPSA-I: 1.23” x 1.28” diameter HPSA-S: 2.25” Y R W B Y R B W Y R B W Class 2 wiring Class Y R W B #20 AWG up to 250 feet up to #20 AWG Y B R W Y R B W Y R W B Y R B W ABCDEFGH Y R W B Wiring Terminals Wiring Terminals Y R B W Y B R W Group Switching Card inside LI Panel Card Switching Group Wiring Terminals Wiring Terminals Y R B W Watertight J Box Watertight Y W R B Light Fixture ABCDEFGH Group Switching Card inside LI Panel Card Switching Group Sensor HPSA-I Outdoor analog photocell sensor, white housing Indoor analog photocell sensor, white housing Skylight analog photocell sensor, white housing Located half way between Located window and first row of lights row window and first Ceiling Class 2 wiring Class #20 AWG up to 250 feet up to #20 AWG #18 AWG up to 1000 feet up to #18 AWG Window North 0-4.4VDC signal to panel; White: DC common 0-4.4VDC signal to panel; ware) HPSA HPSA-I HPSA-S HPSA Sensor • 12VDC Input Voltage: • 0-4.4 VDC Sensor Output: • 4.5 mA maximum Peak Current: • Slew Rate: full scale response time One minute • +12VDC; Black: Wire Color Code: Red: • Operating Tempature: (-40°C- 60°C) -40°F-140°F • soft- by system (controlled none Calibration: HPSA Outdoor Wiring Catalog No. Description Application Range NOTE: May be ordered with custom calibration by adding suffix “X” and stating desired range. HPSA-I Indoor Wiring Sensor Hood Diagrams Ordering Application Information Specifications Pub. No. 27102 rev 10/2009 LIGHTING INTEGRATOR WITH DMX512 INTERFACE LEVEL

In theatrical applications, such as auditoriums and theaters, the convenience of controlling all lighting from a single system ensures that non-stage lighting is controlled along with theatrical lighting cues. LID panels enable this level of integration. The LIDA option provides DMX512 theatrical control as well as the additional functionality of local dataline switches.

LID HIGHLIGHTS „ Optional group switch override setup with smartwired pushbutton programming „ Fail safe operation; relays do not change state if DMX signal lost LIGHTING CONTROL PANEL SYSTEMS „ Flexible switch override priority scheme allows switches to be enabled or disabled „ Compatibility with dataline switches affords additional override capability

B27 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS

B28 LI DMX Level Interior (LID8, LID24, LID48, LIDA8, LIDA24, LIDA48)

Control relays from any DMX control device

Supports one DMX512 universe

Allows local switch overrides with priority

PROJECT

LOCATION/TYPE

Product Description Override Priority Overview The Lighting Integrator DMX panel (LID) allows Relays are controlled by a variety of inputs to the control of relays in Lighting Integrator (LID) panels panel, including direct wired override switches (LIDA from theatrical control devices (i.e., control con- only), direct wired group switches, dataline switches, soles and show controllers). and the DMX control signal. Relays that are con- LIGHTING CONTROL PANEL SYSTEMS trolled by both DMX and a switch respond based on Operation the following override priority scheme:

Selected relays in an LID panel are each con- DMX level >75%: relay ON, accept switch override trolled by one DMX control channel. A channel level greater than 50% turns the relay on and a DMX level <75% relay ON, ignore switch level below 50% turns the relay off. Local over- but >50%: override ride is accommodated via wiring the low voltage DMX level >25% relay OFF, ignore switch switch terminals on the relay driver cards or but <50%: override group switch card. An optional group switch DMX level <25%: relay OFF, accept switch card(s) adds smartwiring capability for eight or override 16 group switches (the latter requires two group cards in a 48 size panel). These switches can DMX level 50: DMX null, no operation performed, accept over- easily be configured to control groups of relays to match DMX channels containing more than one relay. Applications Optional local dataline capability (LIDA) offers Applications include auditoriums, ballrooms, additional override capability via dataline switches. themed entertainment venues, arenas, churches, and TV/film studios.

Features • Control all or portion of panel relays via theatri- • Flexible switch override priority scheme cal control system • Compatibility with optional dataline switches System & Enclosures • Optional group switch override setup with affords additional override capability smartwired pushbutton programming • Qualifies for use in ARRA-funded projects • Fail safe operation; relays do not change state if DMX signal lost

B29 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS System & Enclosures B30 Other panels (4-wire) 800.879.8585 (optional) Local dataline Dataline Switches DMX through (out) terminals DMX in terminals Set starting channel #001 - 464 www.wattstopper.com | Lighting Integrator Panel minimum breakdown minimum 8 switch position DMX dataline • with 500 volt optically isolated RS485 com • selected via DIP end of line termination Integral • warranty One year DMX card DMX card (optional) Automation card Automation card (4-wire) Local dataline (optional) Dataline Switches Data line status LED DMX dataline Select first DMX relay, #1- 48 Lighting Integrator Panel DMX card DMX card Console (optional) Automation card Automation card through (out) is 464 (512 – 48) max address selector switches, DIP switches #1 - 6 control (#1- 48) using = DMX data true) DMX data, Green LED Theatrical Control Theatrical Control Data line termination switch LID Panel Network with DMX Interface LI DMX512 Card LI DMX512 • in and DMX connection for DMX Terminal • via three rotary channel number set Starting • range of relays for relay for DMX Select starting • (Red LED = power on, no LED status indicators & Wiring Specifications System Layout System Layout B31 System & Enclosures LIGHTING CONTROL PANEL SYSTEMS Information 800.879.8585 www.wattstopper.com General LI supplied separately. supplied separately. interior fieldmountsintoanappropriateenclosure relays installedascalledforontheorder.The as 8,24or48relaycapacitywiththequantityof rough-in requirements.Interiorsareconfigured the panelenclosureandcovertofacilitateproject interior isshippedasaseparateassemblyfrom voltage, relaybasedlightingcontrolpanel.TheLI WattStopper’s LightingIntegrator(LI)isalow Description • Two slots available for optional automation, Twoslotsavailableforoptionalautomation, • Integralpushbuttonoverride,statusLED,and • Individualplug-in,latchingstylesinglepole • Interiorprovidescompleteisolationbetween • remote control of relays. remote controlofrelays. connection ofdirectwiredlowvoltagedevicesfor each relay.Removableterminalblocksallow that areannunciatedbyanLEDassociatedwith positive statusfeedbacktotherelaydrivercircuits An isolatedsetofcontactsintherelaysprovidesa relay totoggleitsstatewitheachbuttonpress. each relaydrivercircuittomanuallyforcethe cards. Amomentarypushbuttonisprovidedfor via a24voltDCpulsegeneratedbytherelaydriver LI relaysaredrivenintoalatchedonoroffstate Operation networking andintegrationcontrolcards pilot lightoutputperrelay relays withisolatedpilot/statuscontacts compatible LENCseriesenclosure line andlowvoltagewhenusedwitha only). only). (8 controllablebyscheduling,eightswitching two groupswitchcardsforatotalof16channels switch card(8channels),48sizepanelscanhave 24 sizepanelscanbeorderedwithonegroup wall switchesandoccupancysensors.Eight status indicatorandterminalsforconnectionof is providedwithanoverridepushbutton,LED (scene) stylecontrol.Eachoftheeightchannels channel forcommonon/offcontrolorpattern to beassignedquicklyeachgroupswitching press interfaceallowsanyquantityofrelays Smartwired switchingfunction.Thissimplebutton Group switchingprovidestheuniqueWattStopper Group Switching connected. when WattStopperoccupancysensorsare and willautomaticallyconfigureappropriately sensors. Theswitchinputcircuitsareautosensing maintained contactswitchesaswelloccupancy three wire,momentarytwowire(toggle)or Inputs canbewiredtoaccommodatemomentary • Optional configuration available for use on Optionalconfigurationavailableforuseon • Controlmulti-polecircuitswithoptional • DINrailmountingprovidedwithintheClass2 • Smartwirefeatureallowsgroupingofrelaysfor • SupportsWattStopperoccupancysensorheads • Operation (cont’d.) emergency lightingcircuits contactors andcompatibleLENCenclosure section formountingofoptionalaccessories common control without needforseparatesensorpowerpacks LIGHTING CONTROL PANEL SYSTEMS System & Enclsoures B32 115 240 277 347 35.75" 90.80 cm il Voltage 800.879.8585 14" 35.56 cm 48 relay interior capacity www.wattstopper.com | ___ EM relay count (Not available in 8-relay size panels; max. of 24 in 24-relay or 48-relay size interior) 23.37" 59.37 cm with HDR Heavy Duty Relay Heavy with HDR and pulse OFF 24 VDC, pulse ON - Coil voltage, replaceable individually with external power supply voltages configurable • SCCR (short circuit current rating) 14,000 amps 14,000 rating) circuit current (short • SCCR relays: • HDR SPST contacts Mechanically latched - LV plug-connection, ½” K,O, mounting, - - Contact ratings 30 amps ballast @ 277V 20 amps ballast @ 347V 20 amps tungsten @ 120V 30 amps resistive @ 347V 300,000 mechanical cycles - Endurance: 1.5 HP @ 120V • 24 V rectified or 24VAC, other Pilot light output, • year warranty One ___ GS cards (max 1 in 8, 24, 2 in 48) 14" 35.56 cm 24 relay interior capacity ___ HDR relays installed (max of interior capacity) 10.5" 26.67 cm 115/277 115/347 240 13" 8 relay 33.02 cm LID8 LID24 LID48 LIDA8 LIDA24 LIDA48 interior capacity Interior Capacity Voltage Options Relay Count Group Switch Card Emergency Relays Co Interior Capacity Voltage Options Relay Count Group Switch Card Emergency Relays Installed Options group switching card. One card max per LI8 andgroup switching card. LI48. LI24. Two cards max connection, configurableblocks with screw-less two wire momentaryfor three wire momentary, maintained dry contact(toggle), and two wire occupancy sensors. switches or WattStopper 60 Hz, 240V 50 Hz 60 Hz, 240V • eight channels per installed Group switching, • inputs, removable terminal Low voltage switch available • Accessory power MA @24VAC or 800 MA @ 24VDC - LI8: 1000 - LI24 and LI48: 1400 MA @ 24VAC or 800 MA @ 24VDC • Interior capacity: • Interior SPST relays 8 circuits, up to 8 - 24 SPST relays 24 circuits, up to - 48 SPST relays 48 circuits, up to - • 60 Hz, 120/347V options, 120/277V Input voltage Ordering General LI LI General Information Dimensions Specifications Panel Interior Pub. No. 19607 rev. 08/2009 LIGHTING INTEGRATOR WITH NATIVE BACnet

In applications where owners prefer to coordinate control of building lighting systems directly from a building automation system, LI BACnet panels (LILM or LIB) enable easy integration of lighting controls with industry standard MS/TP BACnet based systems.

LI WITH BACnet HIGHLIGHTS „ Easy installation and verification of lighting circuits by electrical contractor without requiring services of BAS installation professional

„ Industry standard MS/TP twisted pair networking allows LI panels to “piggyback” on BAS network or be

LIGHTING CONTROL PANEL SYSTEMS configured on a separate network segment

„ Easy grouping of relays via either smartwiring (pushbutton programming) or from BACnet workstation using standard BACnet objects and properties

„ BAS required only for scheduled parameters (Occupied/Unoccupied); all other lighting control functions (e.g., blink warn, wall switch override, afterhour time delay) managed by LILM panel

BACnet is a registered trademark of ASHRAE

B33 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS

B34 LILM Series Lighting Integrator Panel Interiors (LILM8, LILM24, LILM48)

Scheduling via DLM Segment Compatible with Digital Lighting Manager or BAS interface Management switches and occupancy sensors

HDR relays include switch for Stand alone or networked operation manual override even when panel is powered off

Eight independent control channels

Integral user interface for setup and diagnostics PROJECT Registered trademark of ASHRAE LOCATION/TYPE

Product Description Networking

Overview The LILM series panel provides simple network- When multiple DLM local networks and one capable lighting control enabling the automation or more LILM panels are connected to a high of lighting functions throughout an entire facility. speed digital DLM segment network for remote The HDR relays in the panel can respond directly management, the Segment Manager automatically to inputs from Digital Lighting Management (DLM) recognizes them and allows configuration with LIGHTING CONTROL PANELS SYSTEMS switches and occupancy sensors. minimal additional setup.

Operation Applications

LILM panels each provide eight automation LILM panels are ideal for applications that can channels that can be assigned any combination benefit from the unique features and energy of relays. Each channel can respond to unique savings of the DLM system. They provide effective schedules sent from the optional Segment control of building exterior lighting as well as Manager or directly from a BACnet-enabled larger interior areas that are not suited for DLM building automation system. Individual relays, or distributed controls. Recommended applications groups of relays, can be controlled by DLM digital include office building lobbies, corridors, loading switches and occupancy sensors. Controls are docks, etc., and school gymnasiums, commons assigned to relays using Push n’ Learn or through areas and hallways. simple menus on the integral user interface.

Features • Standard single pole heavy duty relays • Two free-topology DLM Cat 5e local networks • Available in interiors sized for 8, 24, or 48 relays for switches and sensors maximum • Programmable DLM switches for control of • Compatible with DLM occupancy sensors relays or groups • Qualifies for use in ARRA-funded projects

B35 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANELS SYSTEMS B36 s 800.879.8585 To Switch (optional) additional LILM Panels or DLM Local Networks Local Network RJ45 connector www.wattstopper.com | Sensor Occupancy Occupancy global schedule and control functions;global schedule manager or LMSM segment schedule requires BAS third party Local Network A Local Network B LM-MSTP Wire • provide8 per panel, channels: Automation • cUL listed UL and • warranty One year Integrator) SpecificationsSee General LI (Lighting and electricalsection for interior mechanical specifications. Segment Network connector (MS/TP) B B A A Switch Serial port connector assembly Lower interface LMRJ Cables Category 5e “Select” key LILM Panel OLED display Keypad Segment Network DLM local network segments mayDLM local network segments (linear topology twisted pair dataline) module To 48 loads User interface or BAS diagnostic capabilities; 5 line by 32 character capabilities; 5 line by diagnostic button keypad with backlight; 7 OLED display up to 250mA 24VDC output, network segments: ports per segment across 2 RJ45 ; and sensors include digital switches per local networkcable, up to 1,000’ total DLM segment network MS/TP (RS485) segment Arrows) Typical of up to Typical scheduling) Line Voltage Left, Right (required for “Back” key (Up, Down, Status LEDs • status and for setup, interface user Integral • DLM localconnection to 2 independent Class 2 • Free-topology • for connection to Digital network connector • parameters: Segment network wire rated for BACnet - WattStopper LM-MSTP topology; 4000’ maximum per - Linear Segment Manager Sample Connection Diagram with DLM Switches and Sensor Navigation keys LILM User Interface and DLM Local Network Connection Detail LILM User Interface and DLM Local LILM LILM Connecting Specifications User Interface B37 LIGHTING CONTROL PANELS SYSTEMS Information 800.879.8585 www.wattstopper.com General LI interior to facilitate project rough-in requirements. interior tofacilitateprojectrough-inrequirements. and coverareshippedseparatelyfromthepanel the appropriateenclosure.TheLIpanelenclosure called forontheorder.Theinteriormountsinto capacity withthequantityofrelaysinstalledas interiors areconfiguredas8,24or48relay voltage, relaybasedlightingcontrolpanel.Panel WattStopper’s LightingIntegrator(LI)isalow Description • Two slots available for optional automation, Twoslotsavailableforoptionalautomation, • Integralpushbuttonoverride,statusLED,and • Individualplug-in,latchingstylesinglepole • Interiorprovidescompleteisolationbetween • relays. relays. wired lowvoltagedevicesforremotecontrolof coded terminalblocksallowconnectionofdirect LED associatedwitheachrelay.Removablecolor- relay drivercircuits,whichareannunciatedbyan relays providespositivestatusfeedbacktothe with eachbuttonpress.Anisolatedcontactinthe each relaytomanuallytoggletherelay’sstate cards. Amomentarypushbuttonisprovidedfor via a24voltDCpulsegeneratedbytherelaydriver LI relaysaredriventoalatchedonoroffposition Operation networking andintegrationcontrolcards pilot lightoutputperrelay relays withisolatedpilot/statuscontacts compatible LENCseriesenclosure line andlowvoltagewhenusedwitha only). only). (8 controllablebyscheduling,eightswitching two groupswitchcardsforatotalof16channels switch card(8channels),48sizepanelscanhave or 24sizepanelcanbeorderedwithonegroup of wallswitchesandoccupancysensors.Aneight LED statusindicatorandterminalsforconnection channels isprovidedwithanoverridepushbutton, or forpattern(scene)control.Eachoftheeight switching channelforcommonon/offcontrol of relaystobeassignedquicklyeachgroup simple buttonpressinterfaceallowsanyquantity A uniqueWattStopperswitchingfunction,this Smartwiring DirectWiredSwitches WattStopper occupancysensorsareconnected. will automaticallyconfigureappropriatelywhen The switchinputcircuitsareautosensingand or momentarythreewiretwoinputs. Inputs canbewiredtoaccommodatemaintained • Optional configuration available for use on Optionalconfigurationavailableforuseon • Controlmulti-polecircuitswithoptional • DINrailmountingprovidedwithintheClass2 • Smartwiringfeatureallowsgroupingofrelays • SupportsWattStopperlowvoltageoccupancy • Operation (cont’d.) emergency lightingcircuits contactors andcompatibleLENCenclosure section formountingofoptionalaccessories for commoncontrol power packs sensors withoutneedforseparatesensor LIGHTING CONTROL PANELS SYSTEMS B38 35.75" 90.80 cm 115 240 277 347 oil Voltage 800.879.8585 14" 35.56 cm 48 relay interior capacity www.wattstopper.com | ___ EM relay count (Not available in 8-relay size panels; max. of 24 in 24-relay or 48-relay size interior) 23.37" 59.37 cm - Coil voltage, 24 VDC, pulse ON and pulse OFF ON and VDC, pulse voltage, 24 - Coil replaceable individually with external power supply voltages configurable Operating conditions: for indoor use only; Operating conditions: RH, non-condensing 32-131°F (0-55°C); 5-95% Health PlanningCalifornia Office of Statewide Special Seismicand Development (OSHPD) (#OSP-0257-10); testedCertification Preapproval in accordance with ICC-ES AC-156 • HDR relays: • HDR contacts Mechanically latched - LV plug-connection, ½” K.O. mounting, - Contact ratings: - 20 amps ballast @ 277V 20 amps ballast @ 347V 20 amps tungsten @ 120V 300,000 mechanical cycles - Endurance: 20 amps resistive @ 347V • 1.5 HP @ 120V 24 V rectified or 24VAC, other Pilot light output, • • • year warranty One 14" ___ GS cards (max 1 in 8, 24, 2 in 48) 35.56 cm 24 relay interior capacity ___ HDR relays installed (max of interior capacity) 10.5" 26.67 cm 115/277 115/347 240 13" 8 relay 33.02 cm interior capacity LILM8 LILM24 LILM48 Order enclosures for LILM panel interiors separately. 60 Hz, 240V 50 Hz 60 Hz, 240V connection, configurableblocks with screw-less two wire momentaryfor three wire momentary, maintained dry contact(toggle), and two wire occupancy sensors. switches or WattStopper One card max per LI8 andgroup switching card. LI48. LI24. Two cards max with HDR Heavy Duty Relay Interior Capacity Voltage Options Relay Count Group Switch Card Emergency Relays C Interior Capacity Voltage Options Relay Count Group Switch Card Emergency Relays Installed Options • Interior capacity: • Interior 8 SPST relays - 24 SPST relays - 48 SPST relays - • 60 Hz, 120/347V options, 120/277V Input voltage • removable terminal switch inputs, Low voltage available • Accessory power MA @24VAC or 800 MA @ 24VDC - LI8: 1000 LI48: 1400 MA @ 24VAC or 800 MA @ - LI24 and 24VDC • eight channels per installed Group switching, amps• SCCR (short circuit current rating) 14,000 35004 rev. 5/2013 Ordering General LI LI General Dimensions Information Pub. No. Specifications Panel Interior Lighting Integrator with BACnet Option Interior (LIB8, LIB24, LIB48)

Native level integration Industry standard between lighting control MS/TP communication panel and BAS via BACnet

Configure and control LI Integral blink warnings and panel with any BACnet override time delays handled by workstation LI panel automatically

No proprietary configuration tools or software needed for commissioning PROJECT BACnet is a registered trademark of ASHRAE LOCATION/TYPE

Product Description Lighting Control Specific Functions Overview The Lighting Integrator Native BACnet panel (LIB) The LIB panel provides integral automation capa- enables native level integration of lighting control bilities that enable lighting control compliant between the LIB panel and any building automa- with state energy codes based on ASHRAE 90.1 tion system that supports the ANSI/ASHRAE and IECC. Its distributed processing also ensures LIGHTING CONTROL PANEL SYSTEMS BACnet communication protocol. The LIB allows operation of primary lighting control functions, the BAS to schedule, monitor status, and override such as wall switch overrides, blink warnings, and lighting freely without the need to support light- afterhours time out of overrides. ing-specific functions (e.g., blink warning, local override switches, and delay timers). Applications

Operation In most applications, a BAS will set lighting zones to occupied/unoccupied status through a schedule With the LIB panel system, panel relays and chan- or a workstation command. The LIB panel then nels are automatically exposed to the BAS as coordinates local switch overrides, time delays and standard BACnet objects. Relays can be individu- blink warnings based on this status. ally commanded and monitored for their actualon/ off status, or be combined into channels and com- manded and monitored as a group. This permits a building to be conveniently divided into lighting control zones, greatly reducing the number of indi- vidual objects a BAS must administer. LIB panels perform all typical lighting control sequence of operations without continuous supervision by the BAS.

Features • Integral automation enables BAS to easily • Supports Auto On, or energy saving Manual On provide code compliant lighting control function for lighting in areas scheduled as occu- System & Enclosures • Distributed processing ensures operation of pied primary lighting control functions • Supports AS-100 Automatic Control Switch • Compatible with WattStopper occupancy sweep off function sensors 2nd standard low voltage switch • Qualifies for use in ARRA-funded projects

B39 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS System & Enclosures B40 800.879.8585 Lighting Integrator Panel www.wattstopper.com | MS/TP network BACnet switches for relay override; not compatible relay override; not switches for series dataline switches with HDLS option card • low voltage with direct wired Compatible • for all objects property writable Description • warranty One year Lighting Integrator Panel BACnet ALL OFF, BLINK, or MIXED state ALL OFF, BLINK, or auto-ON (0) switch (250) as five minutes (5) or no blink (0), or AS-100 (1-240 minutes) or no time delay (0) cupied (0) status 120 ohm “end of line” termination jumper of line” termination 120 ohm “end selectable workstation • read channel relays’ status as ALL ON, Instance range 01–08 (1 per channel), Multi State Value, • (1 per channel), sets channel relays to manual-ON (1) or Binary Value, Instance range 101–108 • (1 per channel), sets blink warning time for channel relays Analog Value, Instance range 101–108 • (1 per channel), sets time delay for each channel relay Analog Value, Instance range 201–208 • (one per relay), sets relay to follow channel A–H (1–8) Analog Value, Instance range 01–48 • control relays ON (1), OFF (NULL) range 01–48 (1per relay), monitor and Binary Output, Instance • channels to occupied (1) or unoc- range 01–08 (1 per channel), command Binary Value, Instance LIB Panel Network • with removable port MS/TP communications • rates, baud 9600/19200/38400/76800 • 0 - 127 address selectable, MS/TP MAC • 0 - 999 or 86000 - 86999 Device ID selectable, BAS Native Layout Objects BACnet Supported and System BACnet Card Specifications B41 System & Enclosures LIGHTING CONTROL PANEL SYSTEMS 800.879.8585 www.wattstopper.com Information General LI supplied separately. supplied separately. interior fieldmountsintoanappropriateenclosure relays installedascalledforontheorder.The as 8,24or48relaycapacitywiththequantityof rough-in requirements.Interiorsareconfigured the panelenclosureandcovertofacilitateproject interior isshippedasaseparateassemblyfrom voltage, relaybasedlightingcontrolpanel.TheLI WattStopper’sLighting Integrator(LI)isalow Description • Two slots available for optional automation, Twoslotsavailableforoptionalautomation, • Integralpushbuttonoverride,statusLED,and • Individualplug-in,latchingstylesinglepole • Interiorprovidescompleteisolationbetween • remote control of relays. remote controlofrelays. connection ofdirectwiredlowvoltagedevicesfor each relay.Removableterminalblocksallow that areannunciatedbyanLEDassociatedwith positive statusfeedbacktotherelaydrivercircuits An isolatedsetofcontactsintherelaysprovidesa relay totoggleitsstatewitheachbuttonpress. each relaydrivercircuittomanuallyforcethe cards. Amomentarypushbuttonisprovidedfor via a24voltDCpulsegeneratedbytherelaydriver LI relaysaredrivenintoalatchedonoroffstate Operation networking andintegrationcontrolcards pilot lightoutputperrelay relays withisolatedpilot/statuscontacts compatible LENCseriesenclosure line andlowvoltagewhenusedwitha only). only). (8 controllablebyscheduling,eightswitching two groupswitchcardsforatotalof16channels switch card(8channels),48sizepanelscanhave 24 sizepanelscanbeorderedwithonegroup wall switchesandoccupancysensors.Eight status indicatorandterminalsforconnectionof is providedwithanoverridepushbutton,LED (scene) stylecontrol.Eachoftheeightchannels channel forcommonon/offcontrolorpattern to beassignedquicklyeachgroupswitching press interfaceallowsanyquantityofrelays Smartwired switchingfunction.Thissimplebutton Group switchingprovidestheuniqueWattStopper Group Switching connected. when WattStopperoccupancysensorsare and willautomaticallyconfigureappropriately sensors. Theswitchinputcircuitsareautosensing maintained contactswitchesaswelloccupancy three wire,momentarytwowire(toggle)or Inputs canbewiredtoaccommodatemomentary • Optional configuration available for use on Optionalconfigurationavailableforuseon • Controlmulti-polecircuitswithoptional • DINrailmountingprovidedwithintheClass2 • Smartwirefeatureallowsgroupingofrelaysfor • SupportsWattStopperoccupancysensorheads • Operation (cont’d.) emergency lightingcircuits contactors andcompatibleLENCenclosure section formountingofoptionalaccessories common control without needforseparatesensorpowerpacks LIGHTING CONTROL PANEL SYSTEMS System & Enclosures B42 35.75" 90.80 cm 115 240 277 347 oil Voltage 800.879.8585 14" 35.56 cm 48 relay interior capacity www.wattstopper.com | ___ EM relay count (Not available in 8-relay size panels; max. of 24 in 24-relay or 48-relay size interior) 23.37" 59.37 cm with HDR Heavy Duty Relay with HDR and pulse OFF 24 VDC, pulse ON - Coil voltage, individually replaceable supply voltages configurable with external power • rating) 14,000 amps circuit current SCCR (short relays: • HDR contacts Mechanically latched - LV plug-connection, - ½” K,O, mounting, - Contact ratings 30 amps ballast @ 277V 20 amps ballast @ 347V 20 amps tungsten @ 120V 30 amps resistive @ 347V 300,000 mechanical cycles - Endurance: 1.5 HP @ 120V • Pilot light output, 24 V rectified or 24VAC, other • One year warranty 14" ___ GS cards (max 1 in 8, 24, 2 in 48) 35.56 cm 24 relay interior capacity ___ HDR relays installed (max of interior capacity) 10.5" 26.67 cm 115/277 115/347 240 13" 8 relay 33.02 cm interior capacity LIB8 LIB24 LIB48 group switching card. One card max per LI8 andgroup switching card. LI48. LI24. Two cards max connection, configurableblocks with screw-less two wire momentaryfor three wire momentary, maintained dry contact(toggle), and two wire occupancy sensors. switches or WattStopper 60 Hz, 240V 50 Hz Interior Capacity Voltage Options Relay Count Group Switch Card Emergency Relays C Interior Capacity Voltage Options Relay Count Group Switch Card Emergency Relays Installed Options • eight channels per installed Group switching, • inputs, removable terminal Low voltage switch available • Accessory power - LI8: 1000 MA @24VAC or 800 MA @ 24VDC - LI24 and LI48: 1400 MA @ 24VAC or 800 MA @ 24VDC • Interior capacity: • Interior SPST relays 8 circuits, up to 8 - 24 SPST relays 24 circuits, up to - 48 SPST relays 48 circuits, up to - • 120/277V 60 Hz, 120/347V Input voltage options, Ordering General LI General Dimensions Information Pub. No. 19507 rev. 5/2013 Specifications Panel Interior LIGHTING INTEGRATOR LOW VOLTAGE SWITCHING PANEL

When the application demands simple remote control of lighting circuits, a basic LI panel offers robust control paired with flexibility. Exclusive HDR heavy duty relays ensure reliable performance while compatibility with a wide range of low voltage switches, occupancy sensors and daylighting sensors offers control flexibility.

BASIC LI „ Industry-exclusive heavy duty relay (HDR) for robust switching control „ Smartwired switching for pushbutton programming of relays into groups for common control LIGHTING CONTROL PANEL SYSTEMS „ Compatible with all standard low voltage switch types „ Compatible with WattStopper low voltage occupancy sensors „ Option for contactors for multi-phase load control „ Option for BACnet integration

B43 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS

B44 Lighting Integrator Lighting Control Interior(LI8, LI24,LI48)

Models for 8, 24 or 48 Compatible with wide range circuits of control of low voltage control devices (e.g., switches, occupancy sensors and daylight sensors)

Smartwiring enables easy grouping of relays into channels Industry-exclusive heavy duty for common control relay

PROJECT

LOCATION/TYPE

Product Description Operation (cont’d.)

Overview WattStopper’s Lighting Integrator (LI) is a low Inputs can be wired to accommodate maintained voltage, relay based lighting control panel. Panel or momentary three wire or two wire inputs. The interiors are configured as 8, 24 or 48 relay switch input circuits are auto sensing and will capacity with the quantity of relays installed as automatically configure appropriately when Watt LIGHTING CONTROL PANEL SYSTEMS called for on the order. The interior mounts into Stopper occupancy sensors are connected. the appropriate enclosure. The LI panel enclosure and cover are shipped separately from the panel Smartwiring interior to facilitate project rough-in requirements. A unique WattStopper switching function, this Operation simple button press interface allows any quantity of relays to be assigned quickly to each group LI relays are driven to a latched on or off position switching channel for common on/off control via a 24 volt DC pulse generated by the relay driver or for pattern (scene) control. Each of the eight cards. A momentary pushbutton is provided for channels is provided with an override pushbutton, each relay to manually toggle the relay’s state LED status indicator and terminals for connection with each button press. An isolated contact in the of wall switches and occupancy sensors. An eight relays provides positive status feedback to the or 24 size panel can be ordered with one group relay driver circuits, which are annunciated by an switch card (8 channels), 48 size panels can have LED associated with each relay. Removable color- two group switch cards for a total of 16 channels. coded terminal blocks allow connection of direct wired low voltage devices for remote control of relays.

Features • Interior provides complete isolation between • Smartwiring feature allows grouping of relays line and low voltage when used with a for common control compatible LENC series enclosure • DIN rail mounting provided within the Class 2 • Individual plug-in, latching style single pole section for mounting of optional accessories relays with isolated pilot/status contacts • Control multi-pole circuits with optional System & Enclosures • Integral push button override, status LED, and contactors and compatible LENC enclosure pilot light output per relay • Optional configuration available for use on • Two slots available for optional automation, emergency lighting circuits networking and integration control cards • Qualifies for use in ARRA-funded projects • Supports WattStopper low voltage occupancy sensors without need for separate sensor power packs B45 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS System & Enclosures B46 115 240 277 347 35.75" 90.80 cm oil Voltage 800.879.8585 14" 35.56 cm 48 relay interior capacity www.wattstopper.com | ___ EM relay count (Not available in 8-relay size panels; max. of 24 in 24-relay or 48-relay size interior) 23.37" 59.37 cm group switching card. One card max per LI8 and per LI8 card max card. One switching group cards max LI48. LI24. Two and pulse OFF 24 VDC, pulse ON - Coil voltage, • per installed channels eight switching, Group • relays: HDR SPST contacts Mechanically latched - LV plug-connection, ½” K,O, mounting, - replaceable individually - Contact ratings 30 amps ballast @ 277V 20 amps ballast @ 347V 20 amps tungsten @ 120V 30 amps resistive @ 347V 300,000 mechanical cycles - Endurance: 1.5 HP @ 120V • One year warranty 14" ___ GS cards (max 1 in 8, 24, 2 in 48) 35.56 cm 24 relay interior capacity ___ HDR relays installed (max of interior capacity) 10.5" 26.67 cm 115/277 115/347 240 13" 8 relay 33.02 cm interior capacity LI8 LI24 LI48 with HDR Heavy Duty Relaywith HDR Heavy Duty connection, configurableblocks with tool-less two wire momentaryfor three wire momentary, maintained dry contact(toggle), and two wire occupancy sensors. switches or WattStopper supply voltages configurable with external power 60 Hz, 240V 50 Hz 60 Hz, 240V Installed Options • SCCR (short circuit current rating) 14,000 amps(short circuit current • SCCR • inputs, removable terminal Low voltage switch available • Accessory power MA @24VAC or 800 MA @ 24VDC - LI8: 1000 LI48: 1400 MA @ 24VAC or 800 MA @ - LI24 and 24VDC • other Pilot light output, 24 V rectified or 24VAC, • Interior capacity: • Interior SPST relays 8 circuits, up to 8 - 24 SPST relays 24 circuits, up to - 48 SPST relays 48 circuits, up to - • 60 Hz, 120/347V options, 120/277V Input voltage Interior Capacity Voltage Options Relay Count Group Switch Card Emergency Relays C Interior Capacity Voltage Options Relay Count Group Switch Card Emergency Relays Ordering Dimensions Information Specifications Panel Interior Pub. No. 24804 rev. 11/2009 LIGHTING INTEGRATOR ENCLOSURES AND ACCESSORIES

Every LI control configuration is compatible with a full range of low voltage switches and control devices to extend automation functionality. Additional accessories, such as contactors and photocells, provide additional control options. Comprehensive services ensure optimal system performance. LIGHTING CONTROL PANEL SYSTEMS

B47 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS

B48 Lighting Integrator Panel Enclosures

16-gauge all steel tubs Lockable door access to Class 2 with galvineal finish panel section, meets NFPA 70

Studs provided for quick Screw on, powder coated cover permits temporary hanging via installation of panel key hole screw slots interior section

UL and CUL listed; Surface or flush mounting one year warranty with back mounting holes, screw cover PROJECT

LOCATION/TYPE

Product Description Configurations

Overview Lighting Integrator panel enclosures are designed Enclosures rated for 24 or 48 relay capacity specifically to work with all configurations of have space provided at the bottom for optional LI panel interiors containing 8 to 48 relays. The mounting plates (DMP) to accept DIN rail mounted enclosures are provided with integral mounting accessories such as multi-pole contactors and LIGHTING CONTROL PANEL SYSTEMS studs that are configured to accept the panel ELCU-100 Emergency Lighting Control Units. interior making the installation quick and easy. Standard LENC24 and LENC48 enclosures will Covers are secured to the tubs with screws and accommodate up to six four pole contactors have keyhole style mounting. This allows the (requires DMP mounting plate) or four ELCU- cover to be temporarily hung on the tub during 100 units (requires DMP-1EM mounting plate). the construction phase of the project. All covers LENC8-24 and LENC24-48 enclosures have have hinged doors that expose only the low voltage additional space provided and will accommodate (Class 2) section of the panel and are equipped up to twelve four pole contactors (requires DMP-2 with key locks and two keys each. All Lighting mounting plate) or 12 ELCU-100 units (requires Integrator enclosures are NEMA 1 rated. Consult DMP-3EM mounting plate). factory for other NEMA rated applications.

DIN Rail Mounting Options

DMP1 DMP3EM DMP2 8.5” 4"

12” 5”

DMP1EM 21” 22” 18” System & Enclosures 3.5"

10” 6.5” 2.5”

14” 14” 14” 4.375” 4.375”

B49 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS System & Enclosures B50 35.8" 8.08" 23.37" 20.51"

Line voltage section Line voltage section 4.94" 4.94" 18 lbs 20 lbs 45 lbs 50 lbs 45 lbs 50 lbs 62 lbs 66 lbs 62 lbs 66 lbs 1.86 lbs 5.30 lbs. 3.64 lbs. 7.60 lbs. 800.879.8585 16" 16" 14.0" 23.88" section 14.0" 23.88" section Low voltage LENC48F Low voltage LENC48S LENC24-48F LENC24-48S

Line voltage section

4.94" Line voltage section 4.94" 40.5" 40.5" www.wattstopper.com | 15.75” x 16.62” x 4.575” 17.10” x 18.48” x 4.575” 32.00” x 24.00” x 4.575” 33.35” x 25.85” x 4.575” 32.00” x 24.00” x 4.575” 33.35” x 25.85” x 4.575” 44.50” x 24.00” x 4.575” 45.85” x 25.85” x 4.575” 44.50” x 24.00” x 4.575” 45.85” x 25.85” x 4.575” 8” x 12” x 4.625” 21” x 14” x 4.625” 10” x 14” x 4.37” 22” x 14” x 4.37” 43.88" 43.88" 8.0" 15.0" 16.38" 23.38" 13.58" Line voltage section 4.94" 11.68" section Low voltage 11.68" section 16" 16" Low voltage 14.0" 23.88" section 23.88" 14.5" 16.5" LENC8F LENC8S Low voltage LENC24F

LENC24S

LENC8-24F LENC8-24S Line voltage section voltage Line

12.20" Line voltage section Line voltage section 4.82" 4.94" 26" 26" 8 relay capacity, surface mount 8 relay capacity, flush mount 8 relay capacity with 24 size tub, surface mount 8 relay capacity with 24 size tub, flush mount mount surface capacity, relay 24 24 relay capacity, flush mount 24 relay capacity with 48 size tub, surface mount 24 relay capacity with 48 size tub, flush mount 48 relay capacity, surface mount 48 relay capacity, flush mount mounting plate, one DIN rail for up to 6 contactors mounting plate, two DIN rail for up to 12 contactors mounting plate, one DIN rail with barrier for up to 4 ELCU-100s mounting plate, three DIN rail with barrier for up to 12 ELCU-100s 15.08" 31.38" 31.38" LENC8S LENC8F LENC8-24S LENC8-24F LENC24S LENC24F LENC24-48S LENC24-48F LENC48S LENC48F DMP DMP-2 DMP-1EM DMP-3EM Catalog No. Description Overall Dimensions Overall Weight Including Cover (HxWxD) Qualify for use in ARRA-funded projects. Note: Tub depth 4.50” Cover thickness .075” Tub Ordering Dimensions Information Pub. No. 10808 rev. 11/2011 Lighting Integrator Emergency Relay Panel Option

UL924 listed for use on emergency circuits Allows normal control of emergency circuits via schedule, switch, photocell or other device Factory-assembled interior mounts in standard LI enclosure, ships completely wired Guarantees that emergency lighting will turn on upon loss of normal power

Meets NEC (NFPA70) UL 924 requirements for emergency lighting control PROJECT

LOCATION/TYPE

Product Description Applications

Overview The Lighting Integrator Emergency Relay Panel The Lighting Integrator emergency lighting control option provides certified fail-safe operation of panel option is ideal for applications where lighting control circuits controlled by HDR relays in always-hot emergency lighting circuits need to be an LI lighting control panel. The option is available controlled along with the normal lighting circuits. LIGHTING CONTROL PANEL SYSTEMS with any 24 or 48 size LI panel. Because the lighting control panel with integrated yet dedicated emergency relays operates normally Operation based on the type of intelligence card installed in the panel, this is suitable for virtually any type of A dedicated normal power sense connection application. These panels can be used reliably for monitors the presence of normal power and allows fail safe emergency lighting operation in schools, the HDR relays to control the emergency lighting office buildings, libraries, airports, industrial circuits based on ordinary control schedules and plants, warehouses, and auditoriums. devices, such as switches, occupancy sensors, and daylighting control devices. When normal power Specifications is lost for any reason, all HDR relays controlling emergency circuits are each individually bypassed • 30 Amp normally closed contactors used for automatically by a set of normally closed contacts. shunt operation The HDR relays do not change state during a • One to 24 emergency relays per panel, 24 or 48 power outage so lighting is restored when normal size enclosure only power is restored. • Emergency relay rating: same as HDR • Normal power sense input, 120, 277 or 347 Wiring volts, voltage specific • UL listed for use on emergency circuits Emergency Lighting Line HDR Emergency Relay Panel Configurations Circuit Load Relay 24 Relay Size Panels 48 Relay Size Panels EMERGENCY EMERGENCY EMERGENCY EMERGENCY NORMAL NORMAL NORMAL

Ordering NORMAL

Information N.C. Contactor

Normal N.C. Contactors N.C. Contactors EMERGENCY EMERGENCY EMERGENCY

H NORMAL Power C N Sense Barrier location (typical)

Emergency Lighting Control Description N.C. Contactors N.C. Contactors Order LI Emergency Relay Panel option using the ordering section on the LI level panel cut sheet. B51 www.wattstopper.com 800.879.8585 Pub. No. 29702 rev 10/2009 HDR Low Voltage Relay LIGHTING CONTROL PANEL SYSTEMS

30-Amp rated for Mechanically latching ballast lighting loads

Built-in manual actuator

14,000 Amp SCCR Five-pin pluggable connector for easy low voltage connection Single pole, heavy duty power contacts

PROJECT

LOCATION/TYPE

Product Description Specifications

Overview This low voltage relay is used for control of lighting • 1/2” knockout mounting circuits and other electrical loads in WattStopper’s • Accepts wire gauge #10 - #14 AWG, copper Lighting Integrator control panels. Momentary, low wire, solid or stranded voltage pulses from the panel’s control system • Operating voltage 24 VDC switch the relays on or off. Mechanical latching • Isolated pilot relay contacts, .5 Amp @ 30 VAC/ operation results in lower power consumption. The DC for status feedback relay will remain in the last switched state in the • Integral manual override event of a power loss. A built-in manual actuator • Rated 14,000 amps Short Circuit Current Rating allows lights to be turned on in the event of a panel (SCCR) or relay failure. The relay mounts into a standard • Suitable for use with all HID ballasted loads knockout and comes with a plug-in cable for easy • Expected service life is over 25 years at nominal panel connection. Typically, users specify the load and cycle rate Services & Components number of relays and the panel is assembled and • Dimensions: 3.2”x 1.3”x .85” (81.3 mm x 33.0 shipped with this quantity. mm x 21.6 mm) • UL listed, CSA certified; five year warranty

Ratings

• Ballast load 30 Amp @ 277 VAC HDR Wiring (including HID) 20 Amp @ 347 VAC Power terminal connections • Tungsten load 20 Amp @ 120 VAC • Resistive load 30 Amp @ 347 VAC Manual override switch

• Motor load 1½ HP @ 120 VAC Ylw Ylw Black Red Blue Ordering Catalog No. Description Pluggable wire connection HDR5P Mechanically Latching Relay (low voltage) Information with five-pin plug-in connector, pilot Blue = 24 VDC to center coil Red = On wire contacts, override switch Black = Off wire Ylw = Isolated pilot contacts Qualifies for use in ARRA-funded projects.

www.wattstopper.com Pub. No. 19407 rev 10/2009 B52 800.879.8585 Dataline Switch for LI Complete Control

1-, 2-, 4-, and 8-button Pushbutton control for single relays, configurations groups of relays, and/or channels in Lighting Integrator panel systems Locator light bar for visibility when dark Screwless wallplate and removable lens caps for labeling

Local dataline compatibility provides Pilot light LEDs for easy installation and operation visual status feedback

PROJECT

LOCATION/TYPE

Product Description Control Capabilities Overview The Lighting Integrator (LI) Dataline Switch Dataline switches can be used with LICA and LIDA (HDLSxSS) is designed for use with LI Complete systems. In LICA systems, the buttons may also Control (LICA) and LI DMX (LIDA) panels and offers control system-wide group codes. flexible and user-friendly lighting control of a LIGHTING CONTROL PANEL SYSTEMS single relay or a group of relays in one panel or a Applications network of panels. Operation Multiple Dataline Switches connect together and to a panel via 4-conductor data communications Dataline Switches install into standard wallboxes wiring (also referred to as the local dataline). and connect to an LICA/LIDA panel via dual twisted This reduces the wiring required by conventional pair digital bus wiring. Each switch unit contains switches, since up to 63 devices per panel can one master button and up to eight individual switch share the dataline. Dataline Switches are ideal buttons which can be individually programmed for commercial office or other buildings where (smartwired) to control relays or groups of relays. individual occupant lighting control needs are Individual switch buttons are programmed directly paramount. These switches are flexible enough to from WinControl software on LICA systems accommodate individual needs while facilitating or by lifting the switch covers to uncover the efficient, area-wide automated lighting control. The smartwiring buttons on LIDA systems. Pressing “cleaning” scenario enables maintenance crews to Switches these buttons (see Switch Programming and control needed lighting without interfering with the Wiring) sends a unique digital code that identifies needs of individuals working after hours. the buttons and switch to the panel. The buttons can then be assigned to a relay or a group of relays. The master button is programmed via DIP switches on the back of the switch with a choice of functions.

Features • Works with with LICA and LIDA systems • Optional On Only setting to prevent inadvertently turning lights off • Bi-color pilot light status LEDs indicates relay states for each button (red = All On, green = • Master button with programmable mixed state, no color = All Off) configurations (Restore/All Off; All Off, All On/ All Off, or Disabled) • Locator light bar for finding switch in the dark • Available in white, ivory, almond, and gray • Optional key lock version for public locations • Qualifies for use in ARRA-funded projects • Optional cleaning control scenario

B53 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS Switches B54 4-conductor data communications wire (HDLW4) Consumption Consumption 800.879.8585 Communication 9 to 30 DC/AC Black Red Blue + White - Single-gang 55 mA Double-gang 75 mA Single-gang 50 mA Single-gang 45 mA Dataline Switch Wiring www.wattstopper.com | 3 Switch (8 individual buttons + Master button) Switch Switch (2 individual buttons + Master button) Switch (4 individual buttons + Master button) 114.3mm x 46mm) HxWxD for 1-, 2-, andx 46mm) HxWxD for 114.3mm (114.3mm x 4.5” x 4.5” x 1.8” 4-button switch; 8-button switch x 46mm) HxWxD for 114.8mm • x x 1.8” (69.8mm 4.5” x 2.75” Dimensions: • warranty One year HDLS4SS-4K Almond HDLS4SS-9K Gray HDLS8SS-7K WhiteHDLS8SS-2K Ivory Keyed Octal Dataline HDLS8SS-4K Almond HDLS8SS-9K Gray HDLS1SS-7K WhiteHDLS1SS-2K Ivory Keyed Single Dataline HDLS1SS-4K Almond HDLS1SS-9K Gray HDLS2SS-7K WhiteHDLS2SS-2K Ivory Keyed Dual Dataline HDLS2SS-4K Almond HDLS2SS-9K Gray HDLS4SS-7K WhiteHDLS4SS-2K Ivory Keyed Quad Dataline † † † † † † † † † † † † † † † † Press Smartwire tab again. All LEDs stop flashing. Smartwiring is completed. Repeat for other buttons as needed. Press switch button to be programmed. to flash. Selected button LED continues Other LEDs stop flashing. 4 2 . Dataline Switch Switch (2 individual buttons + Master button) Switch (4 individual buttons + Master button) Switch (8 indi- vidual buttons + Master button) Flashing LED Relay control button Smartwire LED HDLS8SS-9 Gray HDLS2SS-4 Almond HDLS2SS-9 Gray HDLS4SS-7 WhiteHDLS4SS-2 Ivory Quad Dataline HDLS4SS-4 Almond HDLS4SS-9 Gray HDLS8SS-7 WhiteHDLS8SS-2 Ivory Octal Dataline HDLS8SS-4 Almond HDLS1SS-7 WhiteHDLS1SS-2 Ivory Single HDLS1SS-4 Almond HDLS1SS-9 Gray HDLS2SS-7 WhiteHDLS2SS-2 Ivory Dual Dataline Press relay control button to add or delete from group. Remove wallplate and Press Smartwire tab once. Smartwire LED flashes once. All switch button LEDs begin flashing. range 32 to 139°F (0 to 60°C), 5-95% RH 139°F (0 to 60°C), range 32 to noncondensing accommodate 3/8” (9mm) laminated tape 3/8” (9mm) laminated accommodate Smartwire tab † † † † † † † † † † † † † † † † Catalog No. Color Description Catalog No. Color Description Size Power 3 1 • engraving available Custom • Operating temperature Environmental: • non-gangable mounting, wallbox Standard • caps switch button lens Removable Smartwiring a Dataline Switch Smartwiring a Dataline Switch Ordering and Wiring Information Programming Specifications Pub. No. 11209 rev. 5/2013 LVSW-100 Series Low Voltage Switches

Customizable, field Low voltage pushbutton switches for replaceable buttons on/off control of one or more loads

Single gang devices, compatible with standard decorator style Compatible with LC8, LP8, LI and face plates LMCP Series lighting control panels

Appearance matches DLM LMSW-100 LED pilot light on each button Series digital wall switches

PROJECT

LOCATION/TYPE

Product Description LED and button options Overview LVSW-100 Series Low Voltage Switches are Switches are available with one, two, three, four lighting control devices that use conventional and eight buttons. If the connected panel supports point-to-point low voltage wiring for control of the feature, the blue LED associated with each single or multiple loads. Each button provides a button can be used to indicate the state of the LIGHTING CONTROL PANEL SYSTEMS momentary contact that is intended for use with controlled lighting load. Alternately, the LED compatible low voltage relay panels or similar indicators can be lighted continuously and serve as lighting control panels or devices. Each button locator lights to help users find the switch in the has an LED indicator that can serve as a status dark. Each switch may be personalized in the field indicator or as a locator light. with custom-engraved buttons.

Operation Applications

LVSW-100 Series switches are totally passive and The LVSW-100 Series Low Voltage Switches contain no active electronics or power supply. The are perfect for use with LC8 Series lighting buttons are single pole momentary contact and all control panels, as well as Lighting Integrator share a common return. Operation is dependent panels or LP8 Series “Peanut” panels. They upon a Class 2 connection to a compatible are ideal for applications that do not require, or relay panel or other device that can react to a do not accommodate, digital switch control yet Switches momentary contact signal. The LED indicators would benefit from the styling that matches the associated with each switch button are reliant on a appearance of Digital Lighting Management (DLM) 24 VDC source originating from the lighting control digital wall switches, such as projects combining panel. DLM controls and small panels.

Features • Sleek single gang devices fit decorator wall • Five color options and custom engraving plates (not supplied); 1-, 2-, 3-, 4-, and 8-button options; standard buttons may be replaced in models the field • Blue LED indicator on each button can be used • RoHS compliant as a locator light or as a status indicator

B55 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS Switches B56 LVSW-108 Description Switch Switch 8-Button 4-Button 800.879.8585 Low Voltage Wall Low Voltage Low Voltage Wall Low Voltage LVSW-104 White Light Almond Ivory Grey Black White Light Almond Ivory Grey Black www.wattstopper.com | Typical wiring for one button and LED. Add two additional wires for each addi- tional button and LED (e.g. 5 wires for LVSW-102, 7 wires for LVSW-103, etc.). LVSW-103 Button LED Switch button Common Note: Switches do not include face plates. Order decorator style plate separately. 32-130°F (0-55°C), 5-95% RH noncondensing 5-95% RH 32-130°F (0-55°C), P1 LVSW-108-W LVSW-108-LA LVSW-108-I LVSW-108-G LVSW-108-B 1 LVSW-104-W LVSW-104-LA LVSW-104-I LVSW-104-G LVSW-104-B • use only; indoor for conditions: Operating • cUL listed UL and • warranty Five year LVSW-102 COM LED8 LED7 LED6 LED5 LED4 LED3 LED2 LED1 Catalog No. Color Product

SW8 SW7 SW6 SW5 SW4 SW3 SW2 SW1 COM 1 P2 Wiring LVSW-101 Switch Switch Switch

2-Button 1-Button 3-Button

(14mm) Wall Low Voltage Low Voltage Wall Low Voltage 0.55” Wall Low Voltage Blue load status LED(s) button(s) On/Off White Light Almond Ivory Grey Black White Light Almond Ivory Grey Black 1.7” White Light Almond Ivory Grey Black

(43mm) 4.1” buttons and LEDs (104mm) Dimensions • from panel 24 VDC maximum, voltage: Input • current: 50 mA contact operating Maximum • (per LED): 30 mA operating current Maximum • terminal blocks removable Wire connections; button one terminal per - LED one terminal per - terminals; shared with all - two common LVSW-102-W LVSW-102-LA LVSW-102-I LVSW-102-G LVSW-102-B LVSW-101-W LVSW-101-LA LVSW-101-I LVSW-101-G LVSW-101-B LVSW-103-W LVSW-103-LA LVSW-103-I LVSW-103-G LVSW-103-B Product Controls and Models Product Controls Catalog No. Color Product Description Wiring Product Controls Ordering Information Dimensions & Specifications Pub. No. 38002 rev. 5/2013 AS-100 Automatic Control Switch

Automatic or manual Pushbutton overrides switching options the shutoff event

Simple retrofit installation and Multiway operation for operation; no neutral needed 3- and 4-way switching

Terminal style back-wiring Shutoff warning with optional audible beep during grace period PROJECT

LOCATION/TYPE

Product Description Operation (continued)

Overview The InteliSwitch® AS-100 Automatic Control Switch automatically. After hours, if lights were not shut operates as both a manual and automatic control off by users, a signal from the control panel would device. Manually, it allows users to control loads command the switch to delay off. Lighting “blink” on/off. Automatically, it receives signals to turn warns users that lights will turn off in five minutes. LIGHTING CONTROL PANEL SYSTEMS lighting on or off from lighting control panels or The locator LED on the AS-100 blinks and an other lighting control systems. audible beep sounds (if enabled). If the button is pushed during this five minutes, the shutoff will be Operation cancelled and the switch will remain on until the next commanded shutoff signal. The AS-100 replaces a standard wall switch. Occupants turn the lights on and off manually by its Applications pushbutton. However, when a timed power interrupt signal is received from a lighting control panel, the Since signaling is accomplished through power AS-100 is automatically commanded to turn on, turn interruption, the AS-100 does not require off or delay off. The duration of the power interrupt additional signal wiring from a lighting control signal determines how the AS-100 will operate (see system or panel. It is designed for easy retrofit of Power Interruption Signals section). lighting shutoff control in buildings. This greatly reduces installation labor and costs, making it an

Switches Used with a lighting control panel, the AS-100 economical and effective lighting control strategy. allows users to manually turn lighting on in private offices, while lighting in common areas turns on

Features • Settings are selected with the front pushbutton • Self-adjusting zero crossing switching for using configuration LEDs; face plate does not consistent, reliable operation of high inrush need to be removed for setup loads • Users can select automatic-on operation, and an • Can be used in 3-way, 4-way and multiway audible beep warning switching applications • Selectable beep warning sounds every minute • Compatible with all electronic ballasts and during last five minutes, and every five seconds motor loads during last minute • Microcontroller enhances reliability • Five minute delay-off time with user ability to • Command off without delay off time cancel impending shutoff • Qualifies for use in ARRA-funded projects

B57 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS Switches B58 Hot * Panel Control Lighting 800.879.8585

Signal Only No connection for this application. Line

3-Way Line

(during Automatic Delayed-off) Automatic (during

Ground Load

= Setup Mode options off (factory setting) = Setup Mode options off Audible beep (option on) = = Automatic-ON (option on) = Automatic-ON & Audible beep (options on) = Unused y Audible beep Ground Load Automatic-ON www.wattstopper.com | LED displa (Option is on when LED flashes in display ) Setup Mode Options: Neutral Setup Mode Options Single Switch Wiring with Panel 45.0mm x 46.0mm) LxWxD 45.0mm x • 1.81” (68.0mm x 2.69” x 1.75” x Dimensions: • warranty CUL listed; five-year UL and Hot * 0-1300W @ 120 V Watt Ballast & Tungsten or 0-3000W @ 277 V Watt Ballast Panel Control Lighting Signal Only Do not connect to line voltage Line

Wall Junction Box

On/Off Switch

3-Way Line

Ground Load 120 VAC, 60 Hz or 277 VAC, 60 Hz Ground Load

* Neutral Line Signal Only Do not connect to line voltage

White Lt. Almond Ivory

Line 3-Way

Locator LED

Ground Load Remote Switch Switch Master AS-100-W AS-100-A AS-100-I seconds Duration Operation Operation description Operation Duration Operation Normal Operating Mode 1-2 sec Delay off 3 sec 5-minute delay before shutting “blinks” lights and initiates Power interruption 5 sec Turn on Turn off on feature is enabled Turns load on if automatic load off Turns load off. Locator light flashes and audible beep sounds (if enabled). Pushing the button cancels shut off from occurring. Ground Catalog No. Color Description Load Requirement Each switch wired for multiway operation has the ability to turn on, turn off or override a shutoff signal. • 60 Hz 120/277 VAC, Dual voltage • load requirements No minimum • ± 0.1 signal resolution Power interruption Installation Multiway Switch Wiring with Panel One ASP-211 Single-gang Decorator Cover Plate included. Order ASP-422 for Two-gang Decorator Cover Plate with Blank One ASP-211 Single-gang Decorator Cover Plate included. Order ASP-422 for Two-gang Decorator Cover Option, or ASP-432 for Two-gang Decorator Cover Plate with Toggle Switch Option (specify color). No Load Connection ASP-211 Power Wiring Signals Ordering Information Interruption Interruption Installation & Specifications Pub. No. 14807 rev 11/2009 Multi-Button Low Voltage Switch

Architectural Lexan plate, Simple to label with protective screwless cover plastic cover

1, 3, 5 or 9 button Pilot light indication models available

PROJECT

LOCATION/TYPE

Product Description Multiple Push Buttons Overview WattStopper’s multi-button low voltage switches The multi-button switches provide control of multi- offer flexible and user-friendly lighting control via ple lighting groups or zones from a single location. 1, 3, 5, or 9 button models. Depending on the configuration of the lighting control panel, the single larger button on the 3, 5 LIGHTING CONTROL PANEL SYSTEMS Operation and 9 button switches can be used for specialized control functions such as all on, all off, or cleaning The multi-button switches toggle lighting on and operation. The switch’s multiple push buttons and off by signaling WattStopper lighting control panels compact design replace multiple gang switch loca- or occupancy sensors (with manual control capa- tions with a single or double gang wall switch. bility). If lights are off, pressing the button turns lights on. If lights are on, pressing the button turns them off. Applications Adjacent to each standard button is a red pilot From single room, single switch, to central, mul- light indicating the status of controlled light- tiple switch station locations, the multi-button ing when connected to a pilot light output from a switches keep a consistent and pleasing look. lighting control panel. This is particularly useful Consistency in appearance is maintained with when switches are placed in a location where the WattStopper dataline switches or other archi- Switches controlled lighting cannot be seen. Terminals on tecturally designed switches. The multi-button the back of the switch provide easy wiring without switches are particularly well suited for demand- additional connectors. ing switch locations such as reception desk areas, nursing stations, guard stations and administration areas.

Features • 1, 3, 5, or 9 button models available • Terminal back screws simplify wiring • Pilot light next to each standard button for remote • Screwless cover plate enhances switch aesthetics indication of the lighting status • Low voltage switch wiring simplifies installation • Locator light bar helps users find the switch making it easy to add switches anywhere needed easily in the dark and to accommodate multiple switching locations • Mounts in a single or double gang box; no special • Architectural design matches WattStopper data- plates or large gang boxes are required line and other switches • Lens caps are removable for easy labeling of • Qualifies for use in ARRA-funded projects standard buttons B59 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS Switches B60 4.5" 800.879.8585 Size Max Pilot Load Button Larger www.wattstopper.com | 2.75" Single button button Three Five button Nine button fied or DC; each LED draws 5 mA @ 24 V 5 mA @ LED draws DC; each fied or 5 button switch;x 23.9mm) for 1, 3, and 114.3mm x 114.3mm x H x .94” D (114.3mm 4.5” W x 4.5” 9 button switch 23.9mm) for 4.5" Switch Configurations • engraving available Custom • or gray in white, ivory, almond, Available • x H x .94” D (69.8mm 2.75” W x 4.5” Dimensions: • One year warranty Button Standard button Larger button for specialized functions Removable lens caps for label- ing P(x) S(x) Loc Com anel# Locator light P Switch# Downlights washer Wall Sconce Proj screen Common Pilot light Switch input Locator light (one per switch) (one per switch) (for each button) Pilot light (one for each standard button) L1S-7L1S-2 WhiteL1S-4 Ivory L1S-9 Light Almond L3S-7 Gray Single button switchL3S-2 WhiteL3S-4 Ivory L3S-9 0 Light Almond L5S-7 Three button switch Gray L5S-2 WhiteL5S-4 1* Ivory 2*L5S-9 Light Almond L9S-7 Single-gang Five button switch Gray L9S-2 10 mA WhiteL9S-4 1 Ivory L9S-9 4* Light Almond Single-gang Nine button switch Gray 15 mA 1 8* Single-gang 25 mA 1 Double-gang 45 mA Integrator and legacy panel programmablelegacy panel and Integrator manual sensors with inputs; occupancy power LC-100 intelligent control capability; pack tape; with 3/8” (9mm) laminated dard button have labeling capability larger button does not • Lightingwith: WattStopper Compatible • each stan- lens caps for labeling Removable • light LED, 18-30 VAC recti- Pilot and location Product Features Wire Connections † † † † † † † † † † † † † † † † Catalog No. Color Description Standard * with pilot light Wiring & Ordering Dimensions Information Specifications Pub. No. 15406 rev 11/2009 Decorator Seven-button Low Voltage Momentary Switch

Compatible with Long-life LED locator Decorator styling

Available in four colors

Five buttons and two- position paddle provide Controls wide variety of seven contact closures common system protocols

PROJECT

LOCATION/TYPE

Product Description Ideal for Color-changing LED Systems

Overview The Decorator Seven-button Low Voltage The DCC7’s combination of economical control Momentary Switch (DCC7) features a raise/lower with maximum flexibility make it ideal for paddle and five buttons to control any device that controlling multiple-color LED systems. requires multiple contact closures. It is available in LIGHTING CONTROL PANEL SYSTEMS four colors, and is compatible with other Decorator Applications style products, including the DCC2 Low Voltage Momentary Decorator Switch with LED. The DCC7 controls any device that requires multiple contact closures, such as WattStopper Operation Lighting Integrator control panels, color- changing LED systems, electronically controlled The DCC7 controls up to seven contact points shades, and devices that interface with DALI, when each of its contacts are connected to the DMX or RS485 products via dry contact closures. desired I/O board position. For example, when Additionally, its simple contact closure design used in conjunction with compatible LED systems, provides a momentary on/off signal to many other specific buttons may be used to control specific devices, allowing it to initiate actions for other colors, while the paddle may be used to cycle from manufacturers’ devices (e.g. LED or RGB lighting). one color to the next or serve as a master on/off. Since the DCC7 is typically wired to custom I/O The DCC7 can also be used as a momentary switch Switches boards, its setup is flexible. for manual-on applications with WattStopper sensors and power packs.

Features • Five buttons and two-position paddle provide • Long-life LED can function as either an indicator seven contact closure inputs or pilot light • Available in four colors, and is compatible with • Works with interface devices that use a variety Decorator styling of protocols, including DALI, DMX or RS485 via • Each of the DCC7’s nine 22 AWG wires are its two-wire momentary dry contact closures labeled for easy reference

B61 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS Switches B62 NOTE: The DCC7 can be wired with shades from other manufacturers. Please contact your local district manager or representative for more information.

800.879.8585

COM Down  www.wattstopper.com | 44.5mm x 50.3 mm) L x W x D; depth in wall50.3 mm) L x W x D; 44.5mm x 1.65” (41.9mm) 12VAC/VDC, 24V Rectified, 24VAC/VDC • switch openings decorator Fits conventional • 1.98” (67.1mm x 2.64” x 1.75”x Dimensions: warranty • Five-year Button 1 wired as a 2-wire momentary input. as a 2-wire Button 1 wired of buttons 1-5 Typical momentary as 3-wire Paddle wired input to Channel as a Master Switch. Decorator Seven-button Low Voltage Momentary Switch B -to- W JUMPER On (Red) (Black) Off 1 (Orange) 2 (Orange) 3 (Orange) 4 (Orange) 5 (Orange) Pilot (Yellow) 1 (Orange) Shade 1 Up 2 (Orange) Shade 1 Down 3 (Orange) Shade 2 Up 4 (Orange) Shade 2 Down 5 (Orange) Not Used  Jumper DCC7 Common to each paddle In this application the DCC7 Button 1-5 functions: channel used on the RTS. acts as a master raise/lower for all shades. used Not 1 - Raise shade 1 - 2 - Lower shade 1 5 3 - Raise shade 2 4 - Lower shade 2    Lt. Almond Black Ivory White  On (Red) Off (Black) Off

DCC7-A DCC7-B DCC7-I DCC7-W

Pilot (Yellow) Common (White) Common Catalog No. Color Description Product Voltage/Power Common (White) DCC7 with LP Peanut or LI Panel • 24VAC/VDC 24V Rectified, 12VAC/VDC, • rating Internal Contact 50mA Max. • when closed 500mΩ resistance Conditions: • Operating (0-40° C) 32-104°F Temperature: 0-80%, noncondensing Humidity: DCC7 Wired for Shade Control DCC7 Wired for Wiring Ordering Diagrams Information Specifications Pub. No. 28501 rev 10/2009 Decorator Low Voltage Momentary Switch

Long-life LED locator or pilot light Decorator styling compatible with screwless or standard wall plates Available in four colors

Quiet operation

Three-wire momentary Multiway switching on/off contact operation

PROJECT

LOCATION/TYPE

Product Description Locator or Pilot Light

Overview The Decorator Low Voltage Momentary Switch The DCC2 includes an internal green LED which (DCC2) has a clean appearance and provides can function as either a locator or pilot light, significant benefits over other three-wire depending upon the application and how the switch momentary devices. It is intended for use with is wired. By incorporating an LED inside the switch LIGHTING CONTROL PANEL SYSTEMS WattStopper lighting control panels and other instead of another light source, the end-user is applications requiring a momentary contact switch assured of both a long lamp life and very low that provides on/off signals. Available in four power consumption. colors, it complements other decorator devices and matches the full line of Wireless Lighting Applications Control Decorator products. The DCC2 can operate a wide array of WattStopper Operation products, including lighting control panels, occupancy sensors and power packs. Additionally, When the top of the switch is pressed down, the its simple contact closure interface can provide DCC2 makes an internal contact between an on a momentary on and off signal to many other and common terminal. When the bottom of the devices, allowing it to initiate actions for other switch is pressed, it makes an internal contact manufacturer’s devices (e.g., those that output between an off and common terminal. This allows

Switches DMX512 or RS485 signals that can control LEDs or the switch to provide an on/off signal to a relay other lighting systems). panel or other device.

Three- and four-way switching is easily accomplished by parallel wiring a DCC2 to any number of other DCC2 switches. And by field wiring a jumper between the on and off terminals, the DCC2 can provide a two-wire momentary output to allow its use with WattStopper occupancy sensors or the manual-on BZ-150 Universal Voltage Power Pack.

Features • Long-life LED locator/pilot light • Decorator styling • Three-way, four-way and multiway switching • Available in light almond, black, ivory and white • Unlimited number of switches may be connected

B63 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS Switches B64 800.879.8585 Red (On) Yellow (LED) Black (Off) As shown, the LED on the DCC2 is always on, serving as a locator. To disable, disconnect and cap the yellow wire. www.wattstopper.com | As shown at the left, the DCC2 LED is a Pilot Light. To use the LED as a locator, connect the yellow wire to the panel’s 24V supply. ht. 44.5mm x 50.3 mm) L x W x D; depth in wall50.3 mm) L x W x D; 44.5mm x 1.65” (41.9mm) g White (Common) 12VAC/VDC, 24V Rectified, 24VAC/VDC • switch openings decorator Fits conventional • 1.98” (67.1mm x 2.64” x 1.75”x Dimensions: warranty • Five-year Red Blue Black As a Two-wire Momentary (Typical) As shown, LED on the DCC2 is always on, serving as a disable, disconnect To locator. and cap the yellow wire. Lighting Fixture LI/LP Relay Panel Neutral DCC2 Red Red

Decorator Low Voltage Momentary Switch Blue Red

Black

White

Stranded 4#20 AWG (1000 ft. max) Stranded 4#20 AWG Yellow Red

Manual Black

As shown the DCC2 LED is a Pilot Li Grey

BZ-150 Power Pack Orange

Set Power Pack

Switch to Brown Light Almond Black Ivory White Black (Off) Red (On) Yellow (LED) White Black DCC2 DCC2-A DCC2-B DCC2-I DCC2-W White (Common) rest Neutral Line (120VAC or 277VAC) Catalog No. Color Description Product Voltage/Power • 24VAC/VDC 24V Rectified, 12VAC/VDC, • rating Internal Contact 50mA Max. • when closed 500mΩ resistance • center position double throw with Single pole, As an Input to a Relay Panel As an Input to a BZ-150 Power Pack As an Input to a BZ-150 Power Pack for Manual-on Operation As a Three-wire Momentary As a Three-wire Wiring Ordering Information Specifications Pub. No. 28602 rev 10/2009 Momentary Toggle Switches

Momentary on/off contact operation Heavy-duty toggle

Quiet operation

Optional key operated model Side wired screw terminals

PROJECT

LOCATION/TYPE

Product Description Features Overview The LVS-1 is a low voltage momentary contact Made specifically for low voltage control use, the switch used with WattStopper lighting control LVS-1 uses side wire screw terminals for easy, panels. Its appearance matches conventional reliable connection to switch wiring. The switch is toggle switches and it fits standard switch plate available in either ivory, white or gray. A key oper-

LIGHTING CONTROL PANEL SYSTEMS openings. ated model is also available for use in areas where security or vandalism is a concern. Operation Specifications The LVS-1 features a quiet, single-pole, double- throw momentary operation. When toggled up or • 3 Amp, 24 VAC/VDC down, the switch momentarily makes a contact • Single-pole, double-throw with center position closure, sending an on or off signal to the control rest panel. At rest, the switch sits in the center posi- • Fits conventional toggle switch openings tion, making no contact closure. This switch is • Size: 2.19”x 1.06”x 1.31” (55.6mm x 26.9mm x recommended for most low voltage switching 33.3mm) applications because 3-way, 4-way and multi-way • 3 year warranty switching can be accomplished easily by parallel wiring the LVS-1 to any other LVS-1. Any number Wiring Switches of switches can be connected together to fit a spe-

cific application need. LVS-1,K Switch input terminals On Low voltage wiring Single On switch Common Off Off Ordering Catalog No. Color Description or Multi-way On Lighting control panel Information LVS-1-W White Standard momentary toggle switch LVS-1-I Ivory Off LVS-1-G Gray To other switches LVS-1K-G Gray Key operated toggle in gray as needed (key supplied with switch)

Pub. No. 8506 rev 11/2009 B65 www.wattstopper.com 800.879.8585 EM Photocell LIGHTING CONTROL PANEL SYSTEMS Low voltage photocell automatically Compatible with all Watt Stopper turns lighting on and off lighting control panels and power packs

Mounts on building Simple to wire and install exterior or roof

Adjustable aperture window Raintight gray plastic for varying ON setpoint enclosure

PROJECT

LOCATION/TYPE

Product Description Features Overview The EM is a low voltage photocell used for control- • One set of normally open, isolated relay con- ling exterior lighting. It works with Watt Stopper tacts; contacts are closed when sensed light power packs and lighting control panels (Lighting level is below dark setpoint, open when light Integrator and LP series panels) by signalling a level is above light setpoint change in light levels to the panel. • 8-second time delay and built-in setpoint dead- band prevent cycling Operation • 1/2” threaded male conduit base for easy mounting on conduit fittings or junction boxes. Typically mounted so the light level window faces the northern sky, the EM photocell provides an ON Accessory Enclosure Interior signal when the ambient light level drops below a preset “dark” setpoint. It then provides a signal OFF Services & Components as the ambient light level rises above the preset “light” setpoint. The setpoint can be changed for Light sensing specific applications by opening and closing the window Sliding window photocell’s aperture window. Normally, a lighting aperture control panel or a power pack supplies power to the 1/2" thread fitting photocell. The photocell’s relay contact red wires 24 VDC 24 VAC BLK RED are connected to the panel or to a low voltage con- BLK(-) N/O relay contacts BLK RED trolled load. WHT(+) 1 Amp at 30 VAC/VDC

Specifications Accessory Enclosure Interior • 1 - 15 footcandle range (10.8 - 161.5 lux) • Isolated relay contacts 1 amp @ 30 VAC/VDC • Power input: 24 VAC, 1 VA or 24 VDC, 1 VA Mount on exterior or roof of building. • Dimensions: 2.64”x 1.57”x 1.89” (67.1mm x 39.9mm x 48.0mm) Point light sensing • One year warranty window North.

Ordering Lighting (4) #18 AWG Control Catalog No. Description Voltage Information Panel EM-24A2 Exterior photocell 24 VAC EM-24D2 Exterior photocell 24 VDC

www.wattstopper.com B66 800.879.8585 Pub. No. 8406 rev 11/2009 Multi-pole Contactor

Multi-pole design enables control of multiple single-phase Compatible with all HID and or multi-phase loads electronic ballast loads

Normally closed or normally Four pole, SPST power contacts open contacts

Accepts wire gauge #10 - #14 AWG Silver cadmium oxide contacts for long life

PROJECT

LOCATION/TYPE

Product Description Specifications Overview The Multi-pole Contactor is a compact, electrically • Electrically held held lighting contactor used for controlling lighting • Screw compression terminals and other electrical loads in Watt Stopper Lighting • Coil holding power consumption 10VA Integrator (LI) lighting control panels. • Compact DIN rail mounting LIGHTING CONTROL PANEL SYSTEMS • Dimensions: 2.9”x 1.75”x 2.95” (73.7mm x 44.5mm x 74.9mm); weight 11.3 oz. Operation & Features • UL 508 listed, CSA certified; one year warranty

The contactor is compatible with all HID and Ratings electronic ballast loads. All line and load wiring is feed-through style, and screw terminals accept • Ballast load 30 Amp @ 600 V (magnetic, both standard blade and phillips head screw electronic, HID ballasts) drivers. Contactors may be added to any 24- or • Tungsten load 20 Amp @ 277 V 48-relay size Lighting Integrator panel. Contactors • Resistive load 30 Amp @ 480 V may be ordered with LI panels (by specifying them • Motor load 5 HP in the LI panel catalog number) or they may be @ 460 V, 3 phase ordered separately. They may also be easily added to existing lighting control panels with DIN rail Contactor Diagram mounting capability, providing a simple way to expand the number of circuits controlled.

Ordering Catalog No. Description Voltage A1coil A2 A1coil A2 Information C115NC 4-pole normally closed 115V coil C277NC 4-pole normally closed 277V coil C115NO 4-pole normally open 115V coil C277NO 4-pole normally open 277V coil C347NC 4-pole normally closed 347V coil C347NO 4-pole normally open 347V coil Normally Open Normally Closed Services & Components

B67 www.wattstopper.com Pub. No. 9008 rev 11/2009 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS

B68 Lighting Integrator Wire

Data communications wire provides communications Low voltage component wire connects between panels and switches, sensors, and other low voltage signaling devices devices to panels

Distance markings in foot increments Custom cut to specified lengths RS UNSHIELDED (UL)

Color-coded for streamlined installation

E118871 CMP/CL3P 18 AWG 2 P

PROJECT

LOCATION/TYPE

Product Description 4-Conductor Data Communications Wire Overview The proper wire must be installed for connecting HDLW4 4-conductor data communications wire devices to Lighting Integrator (LI) panels, and for is unshielded dual twisted pair wire. This wire is networking panels. Types include low voltage com- used for LICA and LIDA systems. It provides the ponent wire, and data communications wire. local dataline for connecting panels to dataline LIGHTING CONTROL PANEL SYSTEMS switches. This panel-to-device connection (i.e., Low Voltage Wire “local” dataline) requires the use of both twisted pairs, one pair for supplying power to the Dataline This type of wire connects low voltage devices (i.e., Switches, and the other pair for data communica- switches, occupancy sensors, photocells) to panels. tions. It is #20 AWG wire that meets UL and NEC stan- dards for Class 2 applications. Plenum rated wire meets plenum and riser requirements. Several 2-Conductor Data Communications Wire types of multi-conductor low voltage wires are HDLW2 2-conductor data communications wire available for standard, pilot, locator, and multilevel is shielded single twisted pair wire. It connects switching or for connecting photocells to the LI LIC panels. This panel-to-panel connection (i.e., control panels. This wire can also be used to wire “global” dataline) supports up to 500 panels in a relays remotely. single network whose maximum length does not Data Communications Wire exceed 4000 feet. If longer distances are needed or more devices are required, users can add dataline Data communications wire (also referred to as repeaters. dataline wire) is used between LI panels and digital devices. To ensure error-free communications in networked LI panel systems, users must use the right communications wire. Communications quality is critical for reliable operation of a lighting control system. Using the proper wire and following recom- mended installation practices ensures trouble-free start-up and operation of an LI system. Services & Components

B69 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS Services & Components B70

0.210” 0.150” 0.230” 0.275” 0.185” 0.185” 0.230” 0.230” 0.185” 800.879.8585 Red/Black/White Red/Black/White Red/Black/White/Yellow Red/Black/White/Yellow Red/Black/Shield Red/Black/Shield Black/Red (data) Blue/White (power) Black/Red (data) Blue/White (power) white/black/green www.wattstopper.com | Dataline Switches Other panels 3 3 4 4 4 4 4-conductor local communications dataline(HDWL4) (using both pairs) 2 + shield 2 + shield 3 + shield independent twisted pairs, unshielded copper twisted pairs, unshielded independent pF/foot max. Capacitance is 30 conductors. without repeater per network repeater feet per network without terminations 150°C ) Data Communications Wire Communications Data • x 26 AWG), 2is 18 AWG (7 strands HDLW4 • and 1500 feetsupports up to 12 panels HDLW4 • pair with shield is 18/2 AWG twisted HDLW2 • up to 500 panels and 4000 HDLW2 supports • to match power and data Color-coded wires • range: -4 - 302°F (-20°- Operating temperature • UL and CUL listed Lighting Integrator Panel Cards Cards Control (shielded single twisted pair) Complete Automation 2-conductor global communications dataline (HDWL2) Standard switch wire Standard switch plenum rated wire Pilot switch wire Pilot switch plenum rated wire Global Complete Control Dataline. Shielded single twisted pair data communications wire Global Complete Control Dataline. Shielded single twisted pair data communications plenum rated wire. Local Dataline Switch Dataline. Unshielded dual twisted pair data communications wire. Local Dataline Switch Dataline. Unshielded dual twisted pair data communications plenum rated wire. Digital Lighting Management segment network plenum rated wire Lighting Integrator Panel Other panels Low voltage component wire (HOSW4) component wire Sensor Occupancy HSSW3 HSSW3P HPSW4 HPSW4P HDLW2 HDLW2P HDLW4 HDLW4P LM-MSTP terminations switches), locator, or multi-button dard, pilot, wire and remote relay sensor wire, eted 150°C ) Catalog No. Description Conductors Color Code Diameter Low Voltage Component Wire Component Low Voltage • relay and switch wires to match Color-coded • wire (for stan- wire includes switch Component • and jack- #20 AWG, stranded Conductors are • range: -4 - 302°F (-20°- Operating temperature • UL and CUL listed Wiring Requirements for Networks of LIC Wiring Requirements optional automation cards Panels with Ordering Examples Application Information Specifications Pub. No. 13510 rev. 5/2013 CONTRACTOR PANELS

WattStopper offers LP Series and LC8 panels for small stand alone applications.

LP Series panels offer multi-voltage options as well as multi-phase control with contactors. LC8 panels offer off-the-shelf versatility with snap-in relay modules available in single- relay double-pole or double-relay single-pole configurations. LIGHTING CONTROL PANEL SYSTEMS

B71 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS B72 www.wattstopper.com 800.879.8585 LP8 Peanut Lighting Control Panels

Simple and effective interior and exterior lighting control Compatible with AS-100 Automatic Control Switches for local override control

Controls up to eight single- pole lighting circuits

System clock provides time scheduled or astronomic control Easy user interface with on-screen help

PROJECT

LOCATION/TYPE

Description System Clock Product WattStopper’s LP8 Peanut Lighting Control Panels The LP8 system clock provides automation Overview provide simple, effective zone-based control of and features a seven-day format with holiday exterior and interior lighting in small applications. scheduling. Set-up and programming is simple Panels control up to eight channels or zones of with an easy-to-navigate keypad, backlit LCD and LIGHTING CONTROL PANEL SYSTEMS lighting. Zones respond to control signals from the user-friendly help menus. Preprogrammed control system clock (or other signalling device) to turn scenarios include: scheduled-on/off and manual-on/ lighting on and off. LP8 Panels ship pre-assembled scheduled-off. Manual-on/sweep-off is available in easy-to-install compact packages available for with an AS-100 switch. Astronomic or photocell on/ surface and flush mounting. They consist of relays, off, and astronomic or photocell with schedule on/ a system clock, panel intelligence, power supply, tub off available by adding an EM Photocell. and cover. The standard enclosure is NEMA 1-rated. Applications Operation LP8 Panels save energy by turning lights off when For exterior applications, the system clock provides not needed, while providing a secure illuminated astronomic control (based on sunrise and sunset), space when occupants are present. They are or an optional EM Photocell can be added for light- ideal for areas with less than eight loads and a level control. For interior applications, AS-100 small amount of zones in both interior (i.e., small Automatic Control Switches or low voltage switches offices or retail facilities and elevator lobbies) and can automate after-hours lighting shutoff while exterior (i.e., small parking lots, courtyards and providing manual override control. driveways) applications. LP8 Panels integrate with a wide range of control devices, such as switches and occupancy sensors to create a flexible lighting shutoff strategy. LP8 Peanut Panel Features • Preprogrammed control scenarios; seven-day • Uses individually replaceable HDR5P Mechanically format with holiday scheduling, astronomic Latching Relay with integral manual override control and automatic daylight savings • Optional group of eight switch inputs for • Time retained during power outage; nonvolatile pushbutton grouping of relays (Smartwiring™) program memory • LED for visual indication of relay status • Eight universal switch inputs for low voltage • Accepts most types of switch inputs switches, occupancy sensors, photocells or other devices to directly control each relay • Separate high voltage and low voltage sections for user protection • Pushbuttons for manual override of each relay B73 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS LP Peanut Panel B74 12.53" (318.3 mm) 24VAC 240 VAC 240 VAC 240 VAC 240 VAC 115/277 VAC 115/277 VAC 115/277 VAC 115/277 VAC 115/277 VAC 115/277 VAC 115/347 VAC 115/347 VAC 115/347 VAC 115/347 VAC 800.879.8585 120/277 VAC, 50/60 Hz 120/277 VAC, 50/60 Hz 120/277 VAC, 50/60 Hz (Class 2) 14.5" 16.5" Holes Slotted Mounting Low Voltage Compartment Low Voltage (368.3 mm) (419.1 mm) none none none none none none none none

included included included included included included

6" Voltage) (High Line Voltage Compartment Voltage Line www.wattstopper.com | (152.4 mm) 8 Relays 8 Relays 8 Relays 8 Relays 4 Relays 4 Relays 8 Relays 8 Relays 8 Relays 8 Relays 8 Relays 8 Relays 8 Relays 8 Relays 15.08" LP8 Dimensions (383.0 mm) with 3-wire momentary or maintained, 2-wire momentary or maintained, with 3-wire 24 VDC input or maintained, or momentary (optional) grouping of relays pushbutton 5-95% RH noncondensing L x W x D x 419.1mm x 117.3mm) • compatible switch inputs; Eight universal • inputs that allow group switch Eight universal • 32-139°F (0-60°C); Ambient temperature • 16.5” x 4.62” (383.0mm Dimensions: 15.08” x • and CUL listed; one-year warranty UL Flush Flush Flush Flush Flush Flush Flush Surface Surface Surface Surface Surface Surface Surface Switch and pilot connections Override pushbuttons Clock and keypad display on interior door Space for optional Group Switching Card EM Photocell connection LP8 Peanut Lighting Control Panel LP8 Peanut Lighting Control Panel LP8 Peanut Lighting Control Panel LP8 Peanut Lighting Control Panel LP8 Peanut Lighting Control Panel LP8 Peanut Lighting Control Panel LP8 Peanut Lighting Control Panel LP8 Peanut Lighting Control Panel LP8 Peanut Lighting Control Panel LP8 Peanut Lighting Control Panel LP8 Peanut Lighting Control Panel LP8 Peanut Lighting Control Panel LP8 Peanut Lighting Control Panel LP8 Peanut Lighting Control Panel Exterior Photocell, low voltage Automatic Control Switch, White Automatic Control Switch, Light Almond Automatic Control Switch, Ivory Shown with interior door open EM-24A2 AS-100-W AS-100-A AS-100-I LP8S-8-115 LP8S-8-G-115 LP8F-8-115 LP8F-8-G-115 LP8S-4-115 LP8F-4-115 LP8S-8-347 LP8S-8-G-347 LP8F-8-347 LP8F-8-G-347 LP8S-8-240 LP8S-8-G-240 LP8F-8-240 LP8F-8-G-240 Optional system enhancements: VAC, 220-240 VAC, 115/347 VAC; 50/60 Hz VAC, 115/347 VAC; VAC, 220-240 Catalog No. Description Door # Relays Group Voltage Mounting Switching Card LP8 Panel Layout Power supply Accessory power Relays • Relay: Mechanically latching Mechanically • Relay: replaceable Individually manual override Integral Ratings: @ 120 VAC 20 Amp tungsten • at 24 VDC/VAC/VACR Accessory power 800 mA 30 Amp ballast @ 277 VAC 20 Amp ballast @ 347 VAC 30 Amp resistive @ 347 VAC 1.5 hp @ 120 VAC • available: 115/277 Multiple power supplies Wiring & Ordering Installation Information Specifications Pub. No. 15106 rev 11/2009 LP24 Peanut Plus Lighting Control Panels

Simple and effective interior and exterior lighting control Compatible with AS-100 Automatic Control Switches for local override control

Controls up to eight zones

DIN rail accommodates up to 12 four-pole contactors

System clock provides time scheduled or astronomic control PROJECT

LOCATION/TYPE

Description System Clock Product WattStopper’s LP24 Peanut Plus Lighting Control The LP24 system clock provides automation Overview Panels provide simple, effective zone-based and features a seven-day format with holiday control of exterior and interior lighting in small scheduling. Set-up and programming is simple applications. Panels control up to eight channels with an easy-to-navigate keypad, backlit LCD and LIGHTING CONTROL PANEL SYSTEMS or zones of lighting. Zones respond to control user-friendly help menus. Preprogrammed control signals from the system clock (or other signalling scenarios include: scheduled-on/off and manual-on/ device) to turn lighting on and off. LP24 Panels scheduled-off. Manual-on/sweep-off is available ship pre-assembled in easy-to-install packages. with an AS-100 switch. Astronomic or photocell on/ They consist of relays, a system clock, panel off, and astronomic or photocell with schedule on/ intelligence, power supply, large tub with DIN rails off available by adding an EM Photocell. for mounting up to twelve contactors (shipped separately) and cover. Applications

Operation LP24 Panels save energy by turning lights off when not needed, while providing a secure illuminated For exterior applications, the system clock provides space when occupants are present. They are ideal astronomic control (based on sunrise and sunset), for areas with two-pole loads and a small amount or an optional EM Photocell can be added for light- of zones in both interior (i.e., gymnasiums, elevator level control. For interior applications, AS-100 lobbies, commercial warehouses and parking Automatic Control Switches or other low voltage garages) and exterior (i.e., parking lots, courtyards, switches can automate after-hours lighting shutoff sports fields and driveways) applications. LP24 while providing manual override control. Panels integrate with a wide range of control devices such as switches and occupancy sensors to create a flexible lighting shutoff strategy. LP Peanut Panel Features • Preprogrammed control scenarios; seven-day • Controls single and multiphase loads scheduling with holiday, astronomic control and • Optional group of eight universal switch inputs automatic daylight savings for pushbutton grouping of relays (Smartwiring™) • Time retained during power outage; nonvolatile • Pushbuttons for manual override of each relay program memory • LED for visual indication of relay status • Eight universal switch inputs for low voltage switches, occupancy sensors, photocells or other • Accepts most types of switch inputs devices to directly control each relay • Separate high and low voltage sectors for user • Uses individually replaceable HDR5P Mechanically protection B75 www.wattstopper.com Latching Relay with integral manual override • DIN rail accepts up to 12 four-pole contactors 800.879.8585

LIGHTING CONTROL PANEL SYSTEMS LP Peanut Panel B76

(383.5 mm) (383.5 15.1" 24VAC 347 VAC 347 VAC 347 VAC 347 VAC 347 VAC 347 VAC 24 VAC/VDC 800.879.8585 120/277VAC 12 VAC/VDC, 115/277 VAC 115/277 VAC 115/277 VAC 115/277 VAC 115/277 VAC 115/277 VAC 24 V Rectified, (Class 2) 16.0" 23.88" Low Voltage Compartment Low Voltage (606.5 mm) (406.4 mm) (High Voltage) none none none none none none none none included included included included Line Voltage Compartment Line Voltage 8.13" www.wattstopper.com |

(206.5 mm)

28.0" (711.2mm) 28.0" 8 Relays 8 Relays 8 Relays 4 Relays 4 Relays 8 Relays 8 Relays 8 Relays 4 Relays 4 Relays 4 Relays 4 Relays

(797.1 mm) (797.1 31.38" (383.5 mm) (383.5 31.38" LP24 Dimensions 30Amp @ 600 V (magnetic, electronic, HID V (magnetic, electronic, 30Amp @ 600 @ 277 V; load 20 Amp ballasts); Tungsten Motor load 5 30 Amp @ 480 V; Resistive load 3 phase hp @ 460 V, VACR of relays pushbutton grouping 5-95% RH noncondensing x 117.3mm) L x W x D (797.1mm x 605.5mm Flush Flush Flush Flush Flush Flush Surface Surface Surface Surface Surface Surface • Ballast load Ratings for LP24: Contactor • 800 mA at 24 VDC/VAC/ Accessory power • switch inputs; allows Four universal group • 32-139°F (0-60°C); Ambient temperature • 23.88” x 4.62” Dimensions: 31.38” x • and CUL listed; one-year warranty UL Switch and pilot connections Clock and keypad display on interior door Space for optional Group Switching Card EM Photocell connection Override pushbuttons LP24 Peanut Plus Lighting Control Panel LP24 Peanut Plus Lighting Control Panel LP24 Peanut Plus Lighting Control Panel LP24 Peanut Plus Lighting Control Panel LP24 Peanut Plus Lighting Control Panel LP24 Peanut Plus Lighting Control Panel LP24 Peanut Plus Lighting Control Panel LP24 Peanut Plus Lighting Control Panel LP24 Peanut Plus Lighting Control Panel LP24 Peanut Plus Lighting Control Panel LP24 Peanut Plus Lighting Control Panel LP24 Peanut Plus Lighting Control Panel Exterior Photocell, low voltage Automatic Control Switch Decorator Low Voltage Momentary Switch Shown with interior door open with 3-wire momentary or maintained,with 3-wire momentary maintained, or 242-wire momentary or VDC input VAC, 220-240 VAC, 115/347 VAC; 50/60 Hz VAC, 115/347 VAC; VAC, 220-240 EM-24A2 AS-100 DCC2 LP24 Panel Layout LP24S-8-115 LP24S-8-G-115 LP24S-8-347 LP24S-8-G-347 LP24F-8-115 LP24F-8-G-115 LP24F-8-347 LP24F-8-G-347 LP24S-4-115 LP24S-4-347 LP24F-4-115 LP24F-4-347 Power supply Accessory power Optional system enhancements: Relays • Relay: Mechanically latching Mechanically • Relay: replaceable Individually manual override Integral Ratings: @ 120 VAC 20 Amp tungsten • inputs; compatible Eight universal switch 30 Amp ballast @ 277 VAC 20 Amp ballast @ 347 VAC 30 Amp resistive @ 347 VAC 1.5 hp @ 120 VAC • available: 115/277 Multiple power supplies Catalog No. Description Voltage Door # Relays Group Mounting Switching Card Wiring & Ordering Installation Information Specifications Pub. No. 28701 rev 11/2009 LC8-120/277 Volt Modular Contractor Panel

Versatile panel for simple control of indoor and Astronomic system clock with outdoor lighting 16 schedules for flexibility

Easy-to-use touchscreen interface with onscreen help

Compatible with low voltage switches, occupancy sensors Accommodates single-pole and photocells and two-pole relay modules

PROJECT

LOCATION/TYPE

Product Description System Clock Overview The LC8 panel provides zone-based control of up Users can setup and program the LC8 for up to 16 to eight channels, or zones, of interior and exterior unique seven-day schedules, plus a holiday sched- lighting. Zones respond to control signals from the ule, via the backlit touchscreen interface that offers system clock, or an accessory photocell, to auto- context-sensitive on-screen help. Pre-programmed LIGHTING CONTROL PANEL SYSTEMS matically turn lighting on and off. The LC8 panel control scenarios include: schedule- and/or uses interchangeable relay modules, available sep- astronomic-on/off, or manual-on/schedule-off. arately, that can be selected to suit project needs. Manual-on/sweep-off is available using the optional Relay options include the LCSP-2 dual single-pole AS-100 automatic wall switch. Photocell- and/or module and LCDP-1 double-pole module. schedule-on/off are also available with the optional EM24-D2 photocell. Operation Applications The LC8 features a touchscreen interface for all programming and status feedback, and unique LC8 lighting control panels save energy by turning pre-programmed scenarios simplify setup. Exterior lighting off when it is not required, yet providing lighting can be controlled based on sunrise and secure illumination when people are present. sunset via the astronomic clock, or based on The LC8 is ideal for smaller applications with ambient light with an optional EM24-D2 photocell. eight circuits of lighting, or less, such as small Interior lighting can be configured for manual-on/ free-standing retail, library or bank buildings, or LC8 Panel auto-off to maximize energy savings. Accessory lobbies, corridors, public spaces or exteriors of switches provide manual control or after-hours larger buildings. LC8 panels integrate with a range override in conjunction with a blink warn feature. of accessory control devices including low voltage switches, occupancy sensors or photocells to create a flexible lighting shutoff strategy.

Features • Nonvolatile program memory retains all • Eight universal switch inputs for low voltage programming during power outages switches, occupancy sensors or other devices to • Interchangeable single-pole and double-pole directly control each relay relay modules • Pilot light output for each switch input • Manual override of relays and channels via • Accepts most types of switch inputs touchscreen interface • Compatible with LVSW-100 Series Low Voltage Switches and AS-100 Automatic Wall Switch

B77 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS LC8 Panel B78 14.0” 355.6mm 3.0” 76.2mm 24 VDC

12.0” 120/277 VAC 120/277 VAC

800.879.8585 208, 240 or 480 VAC

(304.8mm) Modules clip onto DIN rail, and DIN rail, clip onto Modules and panel power supply plug to connectors. each other via integral relay ratings: relay ratings: www.wattstopper.com | LC8 Dimensions Output 1 Input 2 Output 2 Input 1 amps RH noncondensing 32-139°F (0-60°C); 5-95% • LCSP-2 module module • LCSP-2 @ 120 VAC - 20 amp tungsten VAC @ 120 or 277 - 20 amp ballast module VAC - 0.5 hp @ 120 • LCDP-1 240 or 480 VAC - 20 amp ballast @ 208, VAC - 1 hp @ 208, 240 or 480 • current rating): 14,000 SCCR (short circuit • for indoor use only; Operating conditions: • UL and CUL listed • One year warranty Line Line Load Load Dual Single Pole Relay Module LCSP 2 Power Supply Module Double Pole Relay Module LCDP 1 gure the LC8 for a for the LC8 gure Conduit 14000r1 Pat. Pend. Pat. To Relay Module To To Relay Module or To Power Supply Module 86WA LED lit when relay is on. relay is on. Energy Management Equipment Energy 800.879.8585 www.wattstopper.com Double Pole Double Pole Relay Module LCDP 1 24 Pin to Power Supply Module Line Line Line Line Line Line Line Line Load Load Load Load Load Load Load Load ABAB GROUND GROUND NEUTRAL 120/277V 13999r1 14000r1 14000r1 14001r1 14001r1 Pat. Pend. Pat. Pend. Pat. Pend. Pat. Pend. LED Pat. Pend. 88T9 88T9 88T9 88T9 88T9 CONTROL CONTROL relay active. CONTROL CONTROL CONTROL LED lit when LED lit when LED lit when APPLIANCE APPLIANCE relay is on. relay is on. relay is on. LED lit when LED lit when LED lit when LED lit when APPLIANCE APPLIANCE APPLIANCE relay is on. relay is on. relay is on. relay is on. relay is on. relay is on. 800.879.8585 www.wattstopper.com 800.879.8585 www.wattstopper.com 800.879.8585 www.wattstopper.com 800.879.8585 www.wattstopper.com 800.879.8585 www.wattstopper.com Dual Single Pole Dual Single Pole Relay Module Supply 120/277V Power for use with LC8 Lighting Control Panel LCSP 2 Double Pole Double Pole Relay Module Dual Single Pole Relay Module Double Pole Double Pole Relay Module LCSP 2 LCDP 1 LCDP 1 LCPS 120/277 LCPS Input 1 Output 1 Input 2 Output 2 LC8 panel with LCPS-120/277 volt power supply, space for 4 relay modules Dual single-pole relay module, two 20 amp relays Double-pole relay module, one 20 amp relay Exterior photocell with integral lens shade light adjustment

J4 J5 J6 J7 J8 J9 J10 J11 YRB+24W Y R B +24 W YRB+24W YRB+24W YRB+24W YRB+24W YRB+24W YRB+24W24V GND PCELL GND Line Line Load Load AB 14001r1 Pat. Pend. Pat. To Relay Module To To Relay Module or To Power Supply Module 86WA LED lit when LED lit when relay is on. relay is on. relay is on. Energy Management Equipment Energy 800.879.8585 www.wattstopper.com Dual Single Pole Dual Single Pole Relay Module LCSP 2 LC8-120/277 LCSP-2 LCDP-1 EM-24D2 Optional system enhancements: through touchscreen user interface through touchscreen compatible with 3-wire momentary, 2-wire with 3-wire momentary, compatible pilot light or maintained with momentary output LCD with Screen Touch Switch LV Inputs Catalog No. Description Voltage LC8 Panel and Relay Modules Relay modules can be mixed and matched to confi to and matched be mixed can Relay modules applications. lighting control and double-pole of single-pole variety EM-24D2 Photocell Connection LED LED Reset Button • to switches Relay grouping: configurable • (without relays) Panel weight: 8.1 lbs. • dual 1-pole or single 2-pole Relays: modular; • Relay weight (module): - LCDP-1: 0.49 lbs. - LCSP-2: 0.37 lbs. • VAC; 50/60 Hz Power input: 120/277 • 500 mA at 24 VDC Accessory power: • with screw terminals; Switch inputs Wiring Ordering Information Specifications Panel Layout & Pub. No. 38701 rev. 1/2013 EMERGENCY LIGHTING CONTROLS

Controlling emergency lighting in a coordinated way with normal lighting provides additional opportunities for energy savings. WattStopper offers a range of emergency lighting controls, from integrated, panel-based control to standalone control devices that work with occupancy sensors and other control devices. LIGHTING CONTROL PANEL SYSTEMS

B79 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS

B80 ELCU-100 Emergency Lighting Control Unit

Guarantees emergency lighting remains ON or is turned on when Integrated push-to-test power to the control device is lost button

“Watchdog” feature allows emergency loads to be controlled in tandem with normal power loads

UL listed for use in emergency circuits

Interfaces with fire alarm

panel or security system PROJECT

LOCATION/TYPE

Product Description Mounting

Overview WattStopper’s Emergency Lighting Control Unit The ELCU is equipped with an integral DIN rail (ELCU) is a self-contained, emergency lighting mounting groove and retaining clip mechanism. control device. The ELCU provides all required It can be installed on the DIN rail track provided functionality to allow any standard lighting control within a WattStopper enclosure (i.e., LS-E8, LIGHTING CONTROL PANEL SYSTEMS device to control emergency lighting in conjunction LS-E12), or in a WattStopper lighting control panel. with normal lighting in any area within a building.

Applications Operation The ELCU is designed to control lighting in areas The ELCU monitors a single circuit that provides where emergency lighting fixtures are connected normal lighting to an area. As long as normal on dedicated emergency lighting circuits that are power is present, the ELCU permits lighting typically on 24 hours per day. The ELCU allows control devices (i.e., occupancy sensors, panels, normal control of emergency lighting for energy dimmers, or wall switches) to control the emer- savings and/or task related reasons while strictly gency lighting fixtures as well as the general adhering to National Electric Code requirements. lighting. If power is lost for any reason, including It is suitable for any application where enhanced the tripping of a single branch circuit breaker, the energy saving is desired. ELCU will force the emergency fixtures for that area on. The ELCU can be wired either as a control device, so that emergency lighting follows the control of normal lighting, or as a bypass device to shunt emergency power around a control device when normal power fails.

Features • Eliminates energy waste caused by “always ON” • Compatible with WattStopper occupancy emergency lighting sensors, daylighting controls, lighting control • Integral push-to-test button activates emer- panels, and dimmers gency mode for a true test condition • LED indication for emergency and normal • Connects to remote test switch or other input to power activate emergency ON from a remote location • Half-second delayed ON positively identifies • Operates as a control device or as a shunt emergency fixtures for required maintenance • Senses local single circuit power failure • Provides absolute fail-to-on emergency lighting Emergency Lighting Control • Zero cross switching technology for reliability • UL924 listed, meets NEC, OSHA and NFPA B81 www.wattstopper.com and increased product life safety codes 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS Emergency Lighting Control B82 Test Switch Fire Alarm Input Security Input Other Lighting Normal Lighting Jumper Wire or Normally Closed Input from • • • • Emergency 800.879.8585 Remote Out +24VDC Neut In In Line Remote Out Line In Switch Dimmer Neut. ELCU-100 120/277 VAC; 60Hz 24VDC, normally closed contact N/A N/A Dimmer www.wattstopper.com | In Line Line Power Power Emergency Normal "Sensing" (0.5Nm) L x W x D 87mm x 67mm) warranty Equipment; five year When wired as a shunt, the switching line is not used. Note: Use with Watt Stopper universal dimmers or contact dimmer manufacturer to determine the suitablity of the specified dimmer for shunt operation. • (80°C) fire rated V-0,176°F Housing: • pound-force torque: 4/428 inch Terminal • 2.63” (71mm x 2.78” x 3.44” x Dimensions: • Lighting and Power UL, cUL listed Emergency Normal Neutral Emergency Line Emergency Neutral Normal Line Test Switch Fire Alarm Input Security Input Other Normal Lighting Lighting Jumper Wire or Normally Closed Input from • • • • Emergency Remote Out +24VDC Neut In In Line Remote Out Line "Switching" Line Emergency Lighting Control Unit Remote test switch on single gang plate Surface Mount Enclosure for 1 or 2 ELCU units* Surface Mount Enclosure for up to 6 ELCU units* In Switch Neut. Device Control ON/OFF ELCU-100 In Line Line Power Emergency Power Normal "Sensing" ELCU-100 EMTS-100 LS-E8 LS-E12 dry contact closure When wired as a control device, the ELCU receives a switching signal from the output of the control device (relay, switch, power pack, etc.) Normal Neutral Emergency Line Emergency Neutral Normal Line • VAC; 60Hz 120/277 load: • Maximum - Ballast - Incandescent - Motor • supplies 24 VDC source for Remote activation: 10A @ 120/277 VAC • 20A @ 120/277 VAC button on unit Integral control: push-to-test 1HP @ 120 VAC ELCU Wiring Diagrams Catalog No. Description Voltage *LS-E8 and LS-E12 enclosures include screw cover and DIN rail Ordering 22105 rev. 08/2010 Information Specifications System Wiring Pub. No. ELCU-200 Emergency Lighting Control Unit

Guarantees emergency lighting Interfaces with remains ON or is turned on when fire alarm panel or power to the control device is lost security system

“Watchdog” feature allows UL listed for use in emergency loads to be controlled in emergency circuits tandem with normal power loads

PROJECT Integrated push-to-test button LOCATION/TYPE

Product Description Mounting

Overview WattStopper’s ELCU-200 Emergency Lighting The ELCU-200 mounts directly to a junction box Control Unit is a self-contained device that allows or electrical enclosure that has a standard 1/2” any standard lighting control device to control knockout. It is compatible with all WattStopper emergency lighting in conjunction with normal occupancy sensors, daylighting controllers and LIGHTING CONTROL PANEL SYSTEMS lighting in any area within a building. power packs.

Operation Applications

The ELCU-200 monitors a single circuit that The ELCU-200 is designed to control lighting provides normal lighting to an area. As long as in areas where emergency lighting fixtures are normal power is present, the ELCU-200 permits connected on dedicated emergency lighting lighting control devices (e.g., occupancy sensors, circuits that are typically on 24 hours per day. The panels, dimmers, or wall switches) to control the ELCU-200 allows normal control of emergency emergency lighting fixtures as well as the general lighting for energy savings and/or task related lighting. If power is lost for any reason, including reasons while strictly adhering to National Electric the tripping of a single branch circuit breaker, the Code (NEC) requirements. It is suitable for any ELCU-200 will force on the emergency fixtures for application where enhanced energy saving of that area. The ELCU-200 can be wired either as a emergency lighting is desired. control device, so that emergency lighting follows the control of normal lighting, or as a bypass device to shunt emergency power around a control device (e.g., a dimmer) when normal power fails.

Features • Eliminates energy waste caused by emergency • Compatible with WattStopper occupancy lighting that is always on sensors, daylighting controls, lighting control • Integral push-to-test button activates panels, and dimmers emergency mode for a true test condition • LED indication for emergency and normal • Connects to EMTS-100 Remote Test Switch or power other input to activate emergency on from a • Half-second delayed on positively identifies remote location emergency fixtures for required maintenance • Operates as a control device or as a shunt • Provides absolute fail-to-on emergency lighting • Senses local single circuit power failure • UL924 listed, meets NEC, OSHA and NFPA

Emergency Lighting Control • Zero cross switching technology for reliability safety codes; UL2043 plenum rated and increased product life • Qualifies for use on ARRA-funded projects B83 www.wattstopper.com 800.879.8585 LIGHTING CONTROL PANEL SYSTEMS Emergency Lighting Control B84 800.879.8585 Cap 120/277 VAC; 60Hz 120/277 VAC; 60Hz 24VDC, normally closed contact Normal Lighting Normal Lighting www.wattstopper.com | Normal Switch Sense Lighting Lighting Emergency Emergency Normal Neutral Cut Jumper Loop to use with normally closed switch - Test alarm panel - Fire - Security panel - Other Cut Jumper Loop to use with normally closed switch - Test alarm panel - Fire - Security panel - Other Normal Neutral 55°C) noncondensing H x W x D with a 1/2“ 75.4mm x 41.7mm) warranty Equipment; five year • 32 to 131°F (0 to temperature range: Operating • to 95%, humidity range: 5 Relative • x 2.97” x 1.64” (43.2mm x Dimensions: 1.7” nipple (12.7mm) threaded • Lighting and Power UL, cUL listed Emergency Dimmer Device Control

r1 r1 0 0 6

6 8 8 9

9 0 0

Normal Switch Sense Power

Power

Emergency

Emergency

Power

Power

Normal

Normal Normal Power Sense

Normal Power Sense

Activation

Activation

Remote Remote Cir.#______Cir.#______

.5 .5 8 8 R R m m m m Circle Circle CUT-OUT CUT-OUT EMERGENCY CIRCUIT EMERGENCY CIRCUIT Push to Test Push to Test Emergency Emergency Power Out Emergency Emergency Power Out Emergency Emergency Neutral Emergency Emergency Neutral Dimmer Emergency Emergency Power In Emergency Emergency Power In Emergency Lighting Control Unit Emergency Lighting Control Unit, ARRA-compliant Remote Test Switch on single gang plate When wired as a shunt, the switching line is not used. Note: Use with WattStopper universal dimmers or contact dimmer manufacturer to determine the suitablity of the specified dimmer for shunt operation. When wired as a control device, the ELCU-200 receives a switching signalWhen wired as a control device, the ELCU-200 receives power pack, etc.) from the output of the control device (relay, switch, Emergency Line Emergency “Always On” Emergency Neutral Emergency Normal Line Normal Neutral Emergency Line Emergency “Always On” Neutral Emergency Normal Line Normal Neutral ELCU-200 ELCU-200-U EMTS-100 dry contact closure • VAC; 60Hz 120/277 load: • Maximum - Ballast - Incandescent - Motor • supplies 24 VDC source for Remote activation: 10 A @ 120 VAC • 20 A @ 120/277 VAC button on unit Integral control: push-to-test • V-0, 176° F (80°C) Housing: fire rated 1HP @ 120 VAC ELCU Wired As a Shunt, or Bypass, Device ELCU Wired As a Shunt, or Bypass, ELCU Wired As a Control Device ELCU Wired As a Catalog No. Description Voltage Ordering 29103 rev 9/2010 Information Specifications System Wiring Pub. No. Installation and Installation and Lighting Integrator Emergency Relay Panel Option

UL924 listed for use on emergency circuits Allows normal control of emergency circuits via schedule, switch, photocell or other device Factory-assembled interior mounts in standard LI enclosure, ships completely wired Guarantees that emergency lighting will turn on upon loss of normal power

Meets NEC (NFPA70) UL 924 requirements for emergency lighting control PROJECT

LOCATION/TYPE

Product Description Applications

Overview The Lighting Integrator Emergency Relay Panel The Lighting Integrator emergency lighting control option provides certified fail-safe operation of panel option is ideal for applications where lighting control circuits controlled by HDR relays in always-hot emergency lighting circuits need to be an LI lighting control panel. The option is available controlled along with the normal lighting circuits. LIGHTING CONTROL PANEL SYSTEMS with any 24 or 48 size LI panel. Because the lighting control panel with integrated yet dedicated emergency relays operates normally Operation based on the type of intelligence card installed in the panel, this is suitable for virtually any type of A dedicated normal power sense connection application. These panels can be used reliably for monitors the presence of normal power and allows fail safe emergency lighting operation in schools, the HDR relays to control the emergency lighting office buildings, libraries, airports, industrial circuits based on ordinary control schedules and plants, warehouses, and auditoriums. devices, such as switches, occupancy sensors, and daylighting control devices. When normal power Specifications is lost for any reason, all HDR relays controlling emergency circuits are each individually bypassed • 30 Amp normally closed contactors used for automatically by a set of normally closed contacts. shunt operation The HDR relays do not change state during a • One to 24 emergency relays per panel, 24 or 48 power outage so lighting is restored when normal size enclosure only power is restored. • Emergency relay rating: same as HDR • Normal power sense input, 120, 277 or 347 Wiring volts, voltage specific • UL listed for use on emergency circuits Emergency Lighting Line HDR Emergency Relay Panel Configurations Circuit Load Relay 24 Relay Size Panels 48 Relay Size Panels EMERGENCY EMERGENCY EMERGENCY EMERGENCY NORMAL NORMAL NORMAL

Ordering NORMAL

Information N.C. Contactor

Normal N.C. Contactors N.C. Contactors EMERGENCY EMERGENCY EMERGENCY

H NORMAL Power C N Sense Barrier location (typical)

Emergency Lighting Control Description N.C. Contactors N.C. Contactors Order LI Emergency Relay Panel option using the ordering section on the LI level panel cut sheet. B85 www.wattstopper.com 800.879.8585 Pub. No. 29702 rev 10/2009 LIGHTING CONTROL PANELS SYSTEMS B86 www.wattstopper.com 800.879.8585 B87 SERVICES 800.879.8585 www.wattstopper.com Extended warrantiesavailable Overview Lighting ControlSystemServices Product WattStopper controlproducts to designandinstallationof Technical servicesrelated onsite trainingandtroubleshootingasnecessary. Comprehensive servicesincludedesign,startup, Description and project acceptance. and projectacceptance. the installationphase,throughtofi ongoing ProjectManagementsupportthroughout cedures foreachcomponent.SDRAWSYS provides ponent, installationinstructionsandtestingpro- overrides, sensors,wiringdiagramsforeachcom- circuit/relay/load relationshipsaswelloccupant panel numberingandwiringschedulesshowing and roomcontrolstoshowhardwareconfi can includesystemriserdiagrams,individualpanel nents andquantitiesfor allproducts. Drawings plan whenapplicable)showingsystemcompo- with systemone-linediagram(orrefl (SDRAWSYS) servicesincludesubmittalpackages implementation usingWattStopperproducts.The Engineering servicesprovidecompletedesignand Programming Project Engineering of thesystem (WCGRSCRN). enhance effi Graphical interface screens are customizable to including BACnet integration. advanced logic andcustomized control solutions programming for specialapplications requiring Programming Services (SPROGSYS) provide custom ciency andprovide userfriendly control ected ceiling nal startup guration, guration, LOCATION/TYPE PROJECT energy optimization,andperform auditing. shooting andrepair, implement system upgrades or ing agentswithtesting, provide system trouble- Other services are available to assist commission- occupancy sensors asdescribedabove. WattStopper system hardware WattStopper factory-trained technician to verify all Alternate startup service (SCOMEXSEN)provides a maintenance. training to review programming, operation and program confi tion (SOO)asdirected, orprovides abasicstarting ing asintended, implements sequences ofopera- The service tests andverifi product documentation andproject requirements. sors) isinstalled andconfi material (includingstandalone occupancy sen- that allWattStopper system hardware onthebillof a WattStopper factory-trained technician to verify Comprehensive startup service (SCOM)includes onsite services andmaintenance assistance. Highly qualifi Startup software, andadjustments. system trainingtoreviewall hardware, additional andseparatesitevisits toconduct a WattStopperfactory-trained techniciantoprovide Additional trainingservices(STRAIN) include Training for purchased product(s) for purchasedproduct(s) Free telephonetechnicalsupport ed technicians are available for guration. SCOM also includes owner guration. SCOMalsoincludesowner Startup andtrainingservices Complete projectassistance gured inaccordance with es systems are operat- except standalone SERVICES B88 800.879.8585 www.wattstopper.com | HWARRANTY-1 Year(s) extended warranty for hardware SDRAWSYSSPROGSYSWSGRSCRN Factory project engineering services SCOM Custom factory programming Custom graphic interface screen(s) SCOMEXSENSTRAIN Onsite startup/training excluding occupancy sensors SERVICE Onsite startup/training for all WattStopper products Day(s) Onsite training for WattStopper control products On-site support for commissioning assistance, system optimization, troubleshooting and repair Catalog No. Description Project Sample Sample Graphic Screens Interface Ordering Documents Information Engineering Pub. No. 13806 rev 9/2013 Pub. No. 13806 rev