SUSPENSION 2020.Pdf

Total Page:16

File Type:pdf, Size:1020Kb

SUSPENSION 2020.Pdf MiniMail Page: 1 Parts prices (+VAT) 1 SUSPENSION USED PARTS Part Description Price (+VAT) Part number BRACKET TO BULKHEAD - BRAKE / HYDRO PIPES . S/H 7.00 U.ALA6599 DOWEL - HYDRO REAR STRUT TO DISPLACER . S/H 2.00 U.21A1704 FRONT SUSPENSION TRUMPET 1959-61 (STEEL) - S/H 8.00 U.2A4355 FRONT SUSPENSION TRUMPET 1961-00 (ALLOY) - S/H 8.00 U.21A530 HELPER SPRING - HYDROLASTIC . PRE 1966 . S/H 15.00 U.21A1566 HELPER SPRING - HYDROLASTIC . REAR . 1966 ON . S/H 15.00 U.21A1806 HYDROLASTIC DISPLACER (NON S TYPE) - S/H 125.00 U.DISPLACER HYDROLASTIC DISPLACER REAR STRUT (9.75") - LATE . S/H 9.00 U.21A1805 HYDROLASTIC DISPLACER REAR STRUT (9.375") EARLY . S/H 9.00 U.21A2276 HYDROLASTIC UNION ADAPTOR - FRONT . S/H 5.00 U.21A1524 LOWER ARM PIN . S/H 4.00 U.2A4362 REAR SUSPENSION STRUT (Van + late saloon) . S/H 18.00 U.21A1684 REAR SUSPENSION STRUT - 1961-84 SALOON . S/H 20.00 U.21A1683 REAR SUSPENSION TRUMPET (STEEL) 1959-61- SALOON . S/H 10.00 U.2A7375 REAR SUSPENSION TRUMPET COOPER (ALLOY) - S/H 15.00 U.21A1031 REAR SUSPENSION TRUMPET(STEEL)1959-61(Van/Estate) S/H 10.00 U.21A138 RETAINING BRACKET - DISPLACER TO FR. SUBFRAME S/H 4.00 U.21A1687 RUBBER CONE SPRING - S/H 12.00 U.FAM3968 SPACER - SHOCK ABSORBER TO UPPER ARM . S/H 0.75 U.21A2694 SUSPENSION ARM - LOWER . LH . S/H 4.00 U.21A1881 SUSPENSION ARM - LOWER . RH . S/H 4.00 U.21A1879 UPPER ARM - HYDRO . SURCHARGE ON EXCHANGE 30.00 U.21A1479S UPPER ARM - DRY SUSPENSION . LH . S/H 15.00 U.21A2691 UPPER ARM - DRY SUSPENSION . RH . S/H 10.00 U.21A2690 UPPER ARM - HYDROLASTIC . LH . S/H 30.00 U.21A1482 UPPER ARM - HYDROLASTIC . RH . S/H 30.00 U.21A1479 UPPER ARM HYDRO - SURCHARGE ON EXCHANGE . LH 30.00 U.21A1482S 2 SUSPENSION NEW PARTS Part Description Price (+VAT) Part number ADJUSTABLE HEAVY DUTY TIE BARS (PAIR) 22.00 21A1091 ADJUSTABLE HEIGHT SUSPENSION - FRONT ONLY 25.16 AHKFR ADJUSTABLE HEIGHT SUSPENSION - REAR ONLY 28.39 AHKRR ADJUSTABLE HEIGHT SUSPENSION KIT (Front + Rear) 51.50 AHK BEARING - UPPER ARM 3.75 88G302S BOLT - SHOCK ABSORBER TO UPPER ARM 1.25 BH606321 BOLT KIT - REAR SUBFRAME . MK1/3 (1959-77) 2.50 BOLTKIT2 BOLT KIT - REAR SUBFRAME MK4 (1977 ON) 2.75 BOLTKIT1 BUMP STOP - FRONT EDGE REAR SUBFRAME . HYDRO 4.00 21A1517 BUMP STOP - FRONT SUBFRAME . SINGLE BOLT TYPE 1979-00 3.50 FAM2764 BUMP STOP - FRONT TOWER . 2 BOLT TYPE (1959-79) 4.50 2A4332 BUMP STOP - UPPER ARM . HYDROLASTIC 5.90 21A1598 BUMP STOP KIT - COMP HYDROLASTIC TYPE - FRONT 14.30 C-AJJ4007 BUMP STOP KIT - COMP HYDROLASTIC TYPE - REAR 18.72 C-AJJ3313 BUMP STOP ON HYDROLASTIC RADIUS ARM 4.95 21A1520 BUMPSTOP IN REAR SUBFRAME FOR CONE SPRING 2.00 21A1601 BUMPSTOP UNDER UPPER ARM 1.70 2A4267 BUSH - HYDRO HELPER SPRING TO ARCH 0.39 21A1492 BUSH - RADIUS ARM SHAFT 1.75 2A7325 BUSH - SMALL . REAR SUBFRAME 1.29 2A5818 BUSH - TIE BAR 0.50 31G1155 CIRCLIP - RADIUS ARM STUB AXLE RETAINING ^ 1.50 2A7352 CUP WASHER - TIE BAR 0.55 2A4328 FRONT SUBFRAME METAL FLOOR MOUNTS (PAIR) 8.00 C-STR642 FRONT SUBFRAME POLY TOWER MOUNT KIT 8.86 C-STR643 FRONT SUPPORT PIN - REAR SUBFRAME 6.00 21A1440 GAZ FRONT SHOCK ABSORBER - LOWERED 44.38 C-STN236 MiniMail Page: 2 Parts prices (+VAT) GAZ REAR SHOCK ABSORBER - LOWERED 44.38 C-STN237 GAZ SHOCK ABSORBER - FRONT . STANDARD HEIGHT * 0.00 C-STN231 GREASE NIPPLE - ANGLED 0.80 UHN445 HELPER SPRING C CLIP TO RADIUS ARM - N.O.S 1.50 13H2193 HYDROLASTIC BLEED VALVE 9.75 13H1705 HYDROLASTIC DISPLACER - REFURBISHED . EXCHANGE 90.00 21A2008R HYDROLASTIC DISPLACER RUBBER BOOT 7.50 21A1496 HYDROLASTIC DISPLACER SURCHARGE ON EXCHANGE 70.00 21A2008S HYDROLASTIC PIPE ELBOW WASHER 0.30 LWZ410 HYDROLASTIC PIPE REAR UNION NUT 1.40 17H8236 HYDROLASTIC SUSPENSION FLUID - 4.55 LITRE . (MORRIS05) 28.00 XHS455 HYDROLASTIC UNION ADAPTOR - FRONT . N.O.S 12.00 21A1524 KNUCKLE JOINT - FRONT OR REAR 2.50 GSV1118 KNUCKLE JOINT RUBBER GAITER 0.80 21A425 LOWER ARM - LH . MK1 1959-67 . N.O.S 15.00 2A4324 LOWER ARM - RH . MK1 1959-67 . N.O.S 15.00 2A4318 LOWER ARM BUSH - 1968-00 . (Each) 1.10 21A1882 LOWER ARM BUSH - MK 1(1959-67) 1.00 2A4294 LOWER ARM BUSH SET - HARD NYLON (COMP) . 1967-00 6.00 C-STR631N LOWER ARM BUSH SET - POLY TYPE (Set of 4) 5.92 21A1882P LOWER ARM WIGGLY PIN 7.00 2A4362 LOWER ARMS - 1.5 DEGREE NEGATIVE CAMBER 38.35 C-AJJ3364 LOWER FRONT SUSPENSION ARMS - ON CAR ADJUSTABLE 62.00 C-AJJ3360 NYLON CUP - SUSPENSION KNUCKLE 0.80 21A423MS O RING SEAL - FRONT/ REAR SUSPENSION ARM 0.50 2A7327 RADIUS ARM - EXCHANGE SURCHARGE ON OLD UNIT 40.00 NAM716S RADIUS ARM - HYDROLASTIC - RECON EXCHANGE . RH 60.00 21A1485 RADIUS ARM - HYDROLASTIC - RECON EXCHANGE. LH 60.00 21A1489 RADIUS ARM BEARING 2.50 ATJ4098 RADIUS ARM DRY - LH . RECONDITIONED . EXCHANGE 50.00 NAM7163 RADIUS ARM DRY - RH . RECONDITIONED . EXCHANGE 50.00 NAM7162 RADIUS ARM GREASE TUBE - PLASTIC 1.00 21A396P RADIUS ARM GREASE TUBE - STEEL . N.O.S ^ 9.00 21A396 RADIUS ARM INNER THRUST WASHER 1.25 ACA9302 RADIUS ARM REPAIR KIT 8.50 GSV1125 RADIUS ARM SHAFT SHIM (1mm) 0.80 ACA9099S RADIUS ARM STUB AXLE - DRY SUSPENSION . LH 18.46 2A7364 RADIUS ARM STUB AXLE - DRY SUSPENSION . RH 18.46 2A7351 RADIUS ARM SUPPORT PIN 6.00 ACA9099 REAR SHOCK ABSORBER RUBBER CAP - VAN/ESTATE 2.00 21A640 REAR SUBFRAME BRACKET ADJUSTING SHIM 2.19 CK17 REAR SUBFRAME CAMBER BRACKETS - ADJUSTABLE 20.00 MS70 REAR SUBFRAME NEGATIVE CAMBER BRACKETS - FIXED 17.00 MS69 REAR SUBFRAME POLY BUSH KIT (6) . 1977-00 9.27 C-STR639 REAR SUBFRAME POLY BUSH KIT (8) 1959-77 8.00 C-STR638K ROSE JOINT - MALE (LOWER ARM ETC) 13.50 MSRJM RUBBER CONE SPRING - GENUINE 36.00 FAM3968 RUBBER CONE SPRING - NON GENUINE 28.50 FAM3968Z RUBBER FOR HYDRO COMP BUMPSTOP 3.95 AHH7074 SHOCK ABSORBER - FRONT ( KYB 442001 ) 12.00 GSA388SP SHOCK ABSORBER - REAR ( KYB 442002 ) 12.00 GSA389SP SHOCK ABSORBER BRACKET TO INNER WING - LH 10.50 21A474 SHOCK ABSORBER BRACKET TO INNER WING - RH 10.50 21A471 SHOCK ABSORBER BUSH UPPER KIT - REAR 4.05 C2542 SHORT BOLT - REAR OF REAR SUBFRAME 0.18 BH605101 SPACER - FRONT SHOCK ABSORBER LOWER BOLT 1.60 21A2694 SPRING - HYDRO REAR STRUT 0.90 4G7809 SURCHARGE HYDRO RADIUS ARM EXCHANGE 25.00 21A1485/9S SUSPENSION ARM LOWER 1968-00 - RH ^ 20.00 21A1879 SWIVEL PIN SHIM - 0.002" 1.08 21A105 SWIVEL PIN SHIM - 20" THOU ^ 0.10 21A529 THRUST WASHER - TOP / RADIUS ARM 1.25 2A7324 TIE BAR BUSH - COMP TYPE 0.85 C-STR628 TIE ROD BAR WITH ALL FITTINGS 13.32 8G4249 UPPER ARM - HYDROLASTIC - LH . N.O.S ^ 50.00 21A1482 UPPER SUSPENSION ARM REPAIR KIT 9.75 2A4325K MiniMail Page: 3 Parts prices (+VAT) WASHER - FLAT . TIE ROD / REAR SUBFRAME 0.30 PWZ207 WASHER - SHOCK ABSORBER NUT (AJD7162) 0.19 PWZ306.
Recommended publications
  • Tire Inflation Using Suspension (Tis)
    TIRE INFLATION USING SUSPENSION (TIS) CH. Sai Phani Kumar CH. Bhanu Sai Teja G. Praveen Kumar Singaiah.G B.Tech (Mechanical B.Tech (Mechanical B.Tech (Mechanical Assistant Professor Engineering) Engineering) Engineering) Hyderabad Institute of Hyderabad Institute of Hyderabad Institute of Hyderabad Institute of Technology and Technology and Technology and Technology and Management, Management, Management, Management, Hyderabad, Hyderabad, Telangana. Hyderabad,Telangana. Hyderabad,Telangana. Telangana. Abstract are front-wheel-drive monologue/uni-body designs, In this project we are collecting compressed air from with transversely mounted engines. the vehicle shock absorber (which is a foot pump in this case) and storing the compressed air into the storage tank which holds the air without losing the pressure. This project combines the concepts of both conventional spring coil type suspension and air suspension, thereby introducing spring coil type Fig 1:Leaf spring, Coil spring, Air suspensions suspension with the working fluid as air instead of oil as in the case of conventional one. This concept Introduction to TIS functions both as a shock absorber and produces In addition to this technology, an advanced system is compressed air output during the course of interaction introduced into this phase called Tire Inflation using with road noise. The stored air can be used for various suspension (TIS). TIS are a system which is introduced applications such as to inflate the tires, cleaning to inflate the tires using vehicle suspension. The auxiliary components of vehicle etc.., our project deals system increases tire life, fuel economy and safety by with the usage of compressed air energy to inflate the helping to compensate for pressure losses resulting tires with required pressures.
    [Show full text]
  • Hydrolastic/Hydragas Repair. Copyright Mark Paget 2011
    Hydrolastic/Hydragas repair. Copyright Mark Paget 2011 - Service units - Which service unit to buy? - Instructions - Owner’s handbook for your vehicle - Service - Pre-repair inspection - Repair - Sudden leaks (catastrophic failure) - Evacuation - Vacuum - Flush - Purging the pressure line - Pressure - Scragging - Test drive - Clean up - Fluid - System faults - Interconnection - Advice - Rules of thumb - Wet vs. Dry - Competition parts - Schrader valves - Other relevant papers by this author (suggested reading) - Recommended reading - Part numbers - Other repair tools - Time, motion, money, reality - 18G703 tabulated data and repair/overhaul information • Mini - various • 1100, 1300, 1500, Nomad - all • Apache, Victoria, America - all • 1800 - all • Metro - all 4 cylinder models • MG-F - most • Maxi - all • Allegro - all • Princess 2200 - all • and many, many more... Of all the vehicle manufacturer’s that have ventured down the fluid suspension path, only one got it right and that’s Citroen. Runner up is BMC and its descendants with Moulton Hydrolastic and Hydragas. Citroen’s hydro-pneumatic on a bad day is usually compared to good Hydrolastic. It can probably be argued that BMC et al did manage to provide the car of the future (which floats on fluid) to the masses. All the rest, which includes Ferrari, Mercedes Benz, Jaguar and others, had their own array of short and long term problems. Other manufacturer’s forays into air suspension have been just as successful. Much has been written about Hydrolastic and Hydragas. A lot of which is more fantasy than fact. Hydrolastic and Hydragas are nothing new and in no way complex. The following pages are essentially a collation of information that I’ve found useful over the years.
    [Show full text]
  • Proquest Dissertations
    THEORETICAL ANALYSES OF ROLL-AND PITCH-COUPLED HYDRO- PNEUMATIC STRUT SUSPENSIONS Dongpu Cao A Thesis in The Department of Mechanical and Industrial Engineering Presented in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy (Mechanical Engineering) at Concordia University Montreal, Quebec, Canada March 2008 © Dongpu Cao, 2008 Library and Bibliotheque et 1*1 Archives Canada Archives Canada Published Heritage Direction du Branch Patrimoine de I'edition 395 Wellington Street 395, rue Wellington Ottawa ON K1A0N4 Ottawa ON K1A0N4 Canada Canada Your file Votre reference ISBN: 978-0-494-37763-5 Our file Notre reference ISBN: 978-0-494-37763-5 NOTICE: AVIS: The author has granted a non­ L'auteur a accorde une licence non exclusive exclusive license allowing Library permettant a la Bibliotheque et Archives and Archives Canada to reproduce, Canada de reproduire, publier, archiver, publish, archive, preserve, conserve, sauvegarder, conserver, transmettre au public communicate to the public by par telecommunication ou par Plntemet, prefer, telecommunication or on the Internet, distribuer et vendre des theses partout dans loan, distribute and sell theses le monde, a des fins commerciales ou autres, worldwide, for commercial or non­ sur support microforme, papier, electronique commercial purposes, in microform, et/ou autres formats. paper, electronic and/or any other formats. The author retains copyright L'auteur conserve la propriete du droit d'auteur ownership and moral rights in et des droits moraux qui protege cette these. this thesis. Neither the thesis Ni la these ni des extraits substantiels de nor substantial extracts from it celle-ci ne doivent etre imprimes ou autrement may be printed or otherwise reproduits sans son autorisation.
    [Show full text]
  • “Hydrolastic/Hydragas Repair”
    www.austineighteenhundred.com.au READERS’ CONTRIBUTIONS “Hydrolastic/Hydragas Repair” An article by Mark Paget In this article: - Service units - Which service unit to buy? - Instructions - Owner’s handbook for your vehicle - Service - Pre-repair inspection - Repair - Sudden leaks (catastrophic failure) - Evacuation - Vacuum - Flush - Purging the pressure line - Pressure - Scragging - Test drive - Clean up - Fluid - System faults - Interconnection - Advice - Rules of thumb - Wet vs. Dry - Competition parts - Schrader valves - Recommended reading - Part numbers - 18G703 tabulated data and repair/overhaul information 18G703 Leyland Motor Corporation Australia Applies to: Mini - various 1100, 1300, 1500, Nomad - all Apache, Victoria, America - all 1800 - all Metro - all 4 cylinder models MG-F - most Maxi - all Allegro - all Princess 2200 - all and many, many more... This article is copyright M. Paget. Introduction Of all the vehicle manufacturer’s that have ventured down the fluid suspension path, only one got it right and that’s Citroen. Runner up is BMC and its descendants with Moulton Hydrolastic and Hydragas. Citroen’s hydro-pneumatic on a bad day is usually compared to good Hydrolastic. It can probably be argued that BMC et al did manage to provide the car of the future (which floats on fluid) to the masses. All the rest, which includes Ferrari, Mercedes Benz, Jaguar and others, had their own array of short and long term problems. Other manufacturer’s forays into air suspension have been just as successful. Much has been written about Hydrolastic and Hydragas. A lot of which is more fantasy than fact. Hydrolastic and Hydragas are nothing new and in no way complex.
    [Show full text]
  • Wessex Vehicle Preservation Club Founded 1971
    WESSEX VEHICLE PRESERVATION CLUB FOUNDED 1971 www.wvpc.org.uk ‘WESSEX WAYS’ MAY 2021 CHAIRMAN’S CHATTER Hi Everyone. Have just had the news that you will be ok to give someone a hug from next Monday, that won't make any difference to me as I'm quite happy not hugging and just being miserable !!! All joking aside it would appear that the end of the pandemic is just around the corner, we have a show soon and Mo and myself hope to see as many of you as possible also if things go to plan we may soon be back to having Club night back again, in the meantime you all drive with care, Doug. VEHICLE OF THE MONTH THE “MINI” The Mini came about because of a fuel shortage caused by the 1956 Suez Crisis. Petrol was once again rationed in the UK, sales of large cars slumped, and the market for German bubble cars boomed, even in countries such as Britain, where imported cars were still a rarity. The Fiat 500, launched in 1957, was also hugely successful, especially in its native Italy. Leonard Lord, the somewhat autocratic head of BMC, reportedly detested these cars so much that he vowed to rid the streets of them and design a 'proper miniature car'. He laid down some basic design requirements – the car should be contained within a box that measured 10×4×4 feet (3.0×1.2×1.2 m); and the passenger accommodation should occupy 6 feet (1.8 m) of the 10-foot (3.0 m) length; and the engine, for reasons of cost, should be an existing unit.
    [Show full text]
  • Brakes Topics
    BRAKES TOPICS Brake oil Functions Bleeding Internal expanding brake Pneumatic braking system Brake lining material Vacuum brake Properties Exhaust brakes Calculation of braking force Electrical brakes Shoe geometry Parking brakes Hydraulic braking system Brake efficiency Functions of Brake A brake is a device which inhibits motion Brakes are generally applied to rotating axles or wheels Friction brakes on automobiles store braking heat in the drum brakes or disc brake while braking then conduct it to the air gradually. When traveling downhill some vehicles can use their engines to brake Internal Expanding Brake Internal expanding brakes are used exclusively as wheel brakes, but can be found on some cranes More compact and economical construction The brake shoe of an internal expanding brake is forced outward against the drum to produce the braking action When force from the operating mechanism is applied to the unattached end of the shoe, the shoe expands and brakes the wheel A retracting spring returns the shoe to the original position when braking action is no longer required Brake Lining Material Are composed of a relatively soft but tough and heat-resistant material with a high coefficient of dynamic friction They are typically mounted to a solid metal backing using high-temperature adhesives or rivets The dynamic friction coefficient "µ" for most standard brake pads is usually in the range of 0.35 to 0.42 Using a typical bicycle brake as an example, the backing would be the metal shell which provides mechanical support, and the lining would be the rubbery portion which contacts the rims when the brakes are applied In this view of an automobile disc brake, the brake pad is the black material held by the red metal component Properties of Brake Lining Must be capable of enduring the high temperatures created by the friction forces of braking.
    [Show full text]
  • Car Suspensions
    Car Suspensions Why important • power generated by a engine is useless if the driver can't control the car • Car suspension job : – to maximize the friction between the tires and the road surface – to provide steering stability with good handling – to ensure the comfort of the passengers Double-wishbone suspension Suspension as part of Chassis major systems in vehicle major systems in vehicle • Frame - structural, load-carrying • Steering system - mechanism that component that supports the car's enables the driver to guide and direct engine and body, which are in turn the vehicle supported by the suspension • Tires and wheels - components that • Suspension system - setup that make vehicle motion possible by way of supports weight, absorbs and dampens grip and/or friction with the road shock and helps maintain tire contact three components of any suspension: Coil Springs • springs • most common type • dampers made by heavy-duty • anti-sway bars. torsion bar coiled around an axis. Coil springs compress and expand to absorb the motion of the wheels Leaf springs • several layers of metal bound together to act as a single unit. mostly used in trucks and heavy-duty vehicles Torsion bars • use the twisting properties of a steel bar to provide coil-spring-like performance • One end of a bar is anchored to the vehicle frame -- the other end to a wishbone, which acts like a lever that moves perpendicular • When the wheel hits a bump, vertical motion is transferred to the wishbone -- then, through the levering action. Torsion bar then twists along
    [Show full text]
  • How to Remove and Install Hydragas Spheres
    How to Remove and Install Hydragas Spheres by Mark Jones, [email protected] The following describes the procedure to remove the original hydragas spheres and install regassed hydragas spheres, along with information on repressurising the suspension, hydrolastic fluid recipe and how to make a hydrolastic pump using a grease gun. Depressurising the hydragas system • Start by placing the car on axle stands and remove all four wheels. • Relieve the fluid pressure from both sides of the hydragas system. There are two Schrader valves located on the hydragas pipes behind the under bonnet black plastic cover. • Caution: wear eye protection due to the fluid in the system being at a pressure at or above 400 psig (27.6 bar). o If using a Churchill hydrolastic pump, follow the instructions on the unit to remove the fluid from the spheres. o If you do not have a Churchill hydrolastic pump, other people have used the following method with success: . Connect a Schrader low loss connector valve to the Schrader valves and place a plastic jug on the end of the valve. Slowly open the valve and allow the high pressure liquid to discharge into the plastic jug. Be careful to keep skin away from the low loss connector valve because the fluid in the system is at very high pressure and could damage your skin. o It is not necessary to evacuate the hydrolastic fluid from the spheres; the liquid can be easily drained from the spheres once they have been removed from the car. Removing and reinstalling the spheres Right hand rear • Disconnect the pipe from the sphere using a 17mm wrench.
    [Show full text]
  • 534C-9 534C-10
    ® ® SERVICE MANUAL ® 534C-9 534C-10 2460-4129 July 2002 534C-9 Starting S/N 0344394 thru 0444002 534C-10 Starting S/N 0266057 thru 0266106 CORPORATE OFFICE GRADALL DIVISION JLG INDUSTRIES, INC. JLG INDUSTRIES, INC. 1 JLG DRIVE 406 Mill Avenue S.W. McConnellsburg, PA New Philadelphia, OH 17233-9533 44663 USA USA Telephone: (717) 485-5161 Telephone: (330) 339-2211 Fax: (717) 485-6417 Fax: (330) 339-8458 ® ® OWNER/OPERATOR MANUAL ® 534C-9 534C-10 2460-4171 July 2002 534C-9 Starting S/N 0344394 534C-10 Starting S/N 0266057 Form #20042 Original Issue 3/01 CORPORATE OFFICE GRADALL DIVISION JLG INDUSTRIES, INC. JLG INDUSTRIES, INC. 1 JLG DRIVE 406 Mill Avenue S.W. McConnellsburg, PA New Philadelphia, OH 17233-9533 44663 USA USA Telephone: (717) 485-5161 Telephone: (330) 339-2211 Fax: (717) 485-6417 Fax: (330) 339-8458 TABLE OF CONTENTS IMPORTANT SAFETY NOTICE .......................................... inside front cover TABLE OF CONTENTS INTRODUCTION ............................................................ 2 General Operator Qualifications Orientation Related Manuals & Decals Serial Number Location NOMENCLATURE ........................................................... 3 SAFETY HIGHLIGHTS ..................................................... 4 DECALS ....................................................................... 5 Optional Equipment Decals OPERATORS CAB .......................................................... 10 Control & Instrument Identification CHECKS & SERVICES BEFORE STARTING ENGINE ............. 12 ENGINE OPERATION .....................................................
    [Show full text]
  • Annexe K Au Code Sportif International Appendix K to the International Sporting Code
    publié le / published on: 12.07.2021, application au / application from: 12.07.2021 (dernières mises à jour: en rouge / latest updates: in red) ANNEXE K AU CODE SPORTIF INTERNATIONAL APPENDIX K TO THE INTERNATIONAL SPORTING CODE SOMMAIRE / CONTENTS - Article 1 Principes et abréviations Principles and abbreviations Page 003 - Article 2 Dispositions générales et définitions des voitures General provisions and definitions of cars Page 003 - Article 3 Classement par date et définitions Date classifications and definitions Page 012 - Article 4 Documents d'identité de véhicules conformes à la norme internationale de la FIA Vehicle identity document to international FIA Standard Page 017 - Article 5 Prescriptions de sécurité Safety prescriptions Page 020 - Article 6 Règlement technique pour voitures Non-Homologuées Technical regulations for Non Homologated cars Page 025 - Article 7 Règlement Technique pour voitures Routières de Production Technical regulations for Production Road cars Page 032 - Article 8 Pneus Tyres Page 034 ANNEXES ET SUPPLEMENTS / APPENDICES AND SUPPLEMENTS - Annexe I Liste des Catégories et des Formules éligibles pour les Compétitions Internationales de Vitesse List of Categories and Formulae eligible for International Competitions Page 039 - Annexe II Matériaux recommandés pour être utilisés dans le remplacement et la reconstruction Recommended materials to be used in replacement and re-construction Page 047 - Annexe III Test de Condition Condition Testing Page 049 - Annexe IV Vérification et réparation des pièces en composite
    [Show full text]
  • Instruction for Use Pressure Suspension Pump (Part No
    Ersatzteile für klassische britische Fahrzeuge Instruction for use Pressure suspension pump (Part no. 493522) LIMORA main offi ce Every effort has been made to ensure the accuracy of this chart, but no claims for loss Industriepark Nord 19-21 or damage will be accepted following its use, It is only as a guide. D - 53567 Buchholz Jaguar: +49 (0) 26 83 - 70 61 Triumph: 70 62 Mini: 70 63 Note that the gauge may contain a damping fluid for shock protection - This is normal MG: 70 64 and not a fault Austin Healey: 70 65 Fax: 70 59 1. Initial procedure E-mail: [email protected] • Fill the machine reservoir with the correct fluid. Limora Aachen Feldstraße 41 • Turn tap 'C' fully anti-clockwise. D - 52070 Aachen Tel: +49 (0) 241 - 55 939 0 • Make sure that the vehicle is on level ground with the handbrake off. Fax: +49 (0) 241 - 55 939 20 • Remove dust cap on car hydrolastic / hydrogas connector. E-mail: [email protected] Nous parlons français • Screw the body of the low loss connector as far as possible onto the displacer Wij spreken nederlands valve. Limora Berlin • Operate the pump handle to fill the plastic tube, then close valve Wiebestraße 36-37 • Connect the vehicle hydrolastic / hydragas fluid by turning tap 'C' fully clockwise. D - 10553 Berlin Tel: +49 (0) 30 - 25 93 92 30 2. Raising trim height Fax: +49 (0) 30 - 25 93 92 33 E-mail: [email protected] If merely increasing trim height, open valve and pump up to the required Limora Düsseldorf height / pressure.
    [Show full text]
  • Translated Article from Oldtimers Klassic
    Translated article from Oldtimers Klassic The roadster legend Big Healey, known as the pig. This widened example is the original prototype X230, so thinks its owner. Experts of the marque think different: this thing is a forgery, reason enough to start the research with a white sheet of paper – to create finally a story by itself. At first there was only an e-mail contact. When I got the man on the wire he was reluctant: at that moment he does not think an article about his car makes sense. First negative rumors about the suspect should die down – and then he himself would like to find out, what he has in his garage. I made a point out of the fact that I would be in Illinois soon and would like to see the car at least and that did persuade him. Okay he consented, look inside and outside, test-ride and make pictures but I should not expect any info from his side. As an independent journalist I had to find out by myself about this mystery car. And I could write it is a complete fake, if this would be the result of my visit. A lunatic, this man Peter Fino? What was the reason behind this tactics? And what did really happen? So what, I took on the Challenge. Only ten days to go for the visit between Chicago and Milwaukee. I start reading into bringatrailer.com, (short name BaT) . This original Internet-portal presents old timer rarities for sale and the adjoining comments. For example the prototype Austin Healey X230, recently discovered there.
    [Show full text]