SB TACTICAL PISTOL BRACES SMART LOCK TECHNOLOGY REVOLVER/SILHOUETTE/ETC Gives the Shooter Enhanced Control Over Carbine- MAGLOC® THUMB REST for GLOCK® REVOLVER / SILHOUETTE / TC INDEX & SMG-Based Semi-Auto Pistols Barrels ...... 243-244 Single Action Parts...... 242-243 The folks at SB started the "Brace Revolution" with their original Improves Control & Reduces Muzzle Jump Brace for AR-15 pistols that made shooting a handgun based on a For Better Accuracy Double Action & T/C Parts. . . . .241-242 Speedloaders...... 247-248 rifle, carbine, or submachinegun a whole lot more manageable AND Ambidextrous rest provides comfortable sup- fun to shoot. They have continued expanding the line to cover a port for the thumb of your shooting hand. Helps you Glock Grips...... 245-247 Springs...... 244-245 variety of similar but non-AR based pistols. While originally designed control muzzle flip for fast, accurate follow-up shots, Competition 2-M to help handicapped shooters, the concept is the same for all: the while the extended beavertail protects the web of the Brace can be strapped comfortable to the forearm of the shooting hand from painful contact with the slide. Stainless hand for more accurate one-handed shooting with less fatigue OR steel pin replaces the factory trigger housing pin to APEX TACTICAL HOGUE S&W REVOLVER it can be rested against the shoulder or cheek like a traditional stock anchor the rest securely to the grip frame. May require for a third point of contact to stabilize the pistol for fast yet carefully some fitting, but no permanent modification to gun. SMITH & WESSON K/L/N REVOLVER EXTENDED CYLINDER RELEASE LATCH 3 aimed shots. Either way, the shooter is able to maintain excellent Competition 2-M features /8" wide thumb rests for Glock Duty-M control over the weapon. The Braces themselves are molded from maximum support and muzzle control in action shooting events. Duty- EVOLUTION IV DAO HAMMER Unlock Cylinder Without Repositioning reinforced hard polymer and fitted with the necessary hardware 5 M has slightly narrower, /16" wide rests for improved fit in duty holsters. Converts Your Wheelgun To a DAO Trigger & Lets Grip Hand For Fast Reloads to "interface" securely and solidly with the receiver of the firearm. Both rests may limit access to slide lock lever with thumb of shooting You Adjust Pull Weight Oversized, extended cylinder release latch All come with a nylon webbing strap for cinching the brace to the hand, and are not recommended for use with thumb-break holsters. shooter's forearm. ab allows you to unlock the cylinder without hav- SPECS: Molded polymer, black. Fits Glock 17, 18, 19, 20, 21, 21SF, 22, 23, The Apex Evolution IV replacement hammer ing to reposition your grip hand. Ensures fast 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 37, 38, 39. Does not fit slim line converts your Smith & Wesson revolver to double- SBA4 5-POSITION BRACE - reloads for an extra edge in competition. The Glock 36 or 21SF. Some models, such as 10mm and .45 ACP made after action-only (DAO) operation, while also enabling DOUBLE ACTION & T/C PARTS This Brace fits firearm platforms extended arm’s unique geometry maximizes leverage and allows the 2007 with serial number starting with L, require enlarged holes on the rest you to fine-tune your gun for a lighter double-action that accept an AR-15 carbine 1 shooter to bring substantially greater force to bear with less move- to ensure proper fit. Competition 2-M – 1 /2" (3.8cm) long, 2" (5.1cm) wide, pull weight. Simply adjust the strain screw for lighter main spring receiver extension (i.e., an ad- 1 ment than needed to operate the factory latch. Oversized thumb pad .35" (8.99mm) beavertail. .39 oz. (11g) weight. Duty-M – 1 /2" (3.8cm) long, force, without sacrificing reliability. Lacks a hammer spur, so ideal justable carbine stock buffer with deeply grooved face offers solid, nonslip contact and is angled 2" (5.1cm) wide, .75" (19.1mm) beavertail. .35 oz. (9.9g). for a concealed-carry gun. CNC machined and wire-EDM cut from tube). It's 5-position adjustable for length thanks to the M4 carbine to further improve leverage. Standard model is a short, compact heat-treated 17-4 PH stainless steel, then surface ground to en- buffer tube that comes with it, and there's an ambidextrous socket #100-005-389AV Comp. 2-M Thumb Rest, 2A18B30​ ������� $ 27.99 design that fits most shooters with average hand size. Long model is sure precise dimensions for consistent performance. Semi drop-in for QD sling swivels. The tube is made of extra-strong 7075 T6 #100-005-390AV Duty-M Thumb Rest, 2A16I86​ ��������������� 25.99 slightlylonger to accommodate shooters with small hands. replacement for the factory hammer - some gunsmith fitting may aluminum and has a "mil-spec" (1.14") O.D. Sounds like an AR-15 SPECS: Stainless steel. Standard - .98" (25mm) long, Long - 1.24" be required. ab only proposition but in fact, more and more non-AR firearms are (31.5mm) long. Fits Smith & Wesson K, L and N frame revolvers. Some SPECS: Works in Smith & Wesson centerfire revolvers manufacturer after coming with adapters to allow use of the many available AR ac- fitting may be required. January 2012, including Performance Center models. Separate models cessories. Buffer and spring are not included. for K-/L-Frame and N-Frame revolvers. Kits include replacement ham- #408-000-090AV Standard Extended, 8K68M99​ �������������$ 68.99 #100-033-455AV SBA4 5-Position Adj. Brace, Blk, ​ mer, sear, stirrup and pins (pre-installed), sear spring, and 2 rebound slide #408-000-071AV Long Extended Latch, 8K68J99​ ����������� 68.99 5Z116A57 �������������������������������������������������� $ 129.99 HKPDWTM FOR H&K MP5 & CLONES - This 3-position adjustable springs (.160" and .165" dia.). #100-033-456AV SBA4 5-Position Adj. Brace, FDE, ​ Brace fits the Heckler #100-018-576AV S&W K-/L-Frame Hammer, 5Z116P57 �������������������������������������������������� 129.99 & Koch MP5, MP5K, 7F128E53​ ��������������������������������������������������� $ 151.95 HK53, and "reverse POWER CUSTOM SMITH & WESSON TM #100-018-577AV S&W N-Frame Hammer, 7F128H53​ ��� 151.95 FS1913 FOR SIG MCX/MPX - stretch" clones. It fea- The Brace comes the SIG MCX/ tures SB's quick-de- K/L/N/X-FRAME REVOLVER MPX platform! This Brace clamps ploying "pull through" to any firearm with an MIL-STD system that lets you OVERSIZED CYLINDER HKPDW in mid position 1913 Picatinny stock attachment extend the Brace just APEX TACTICAL RELEASE THUMB PIECE point at the rear of the receiver. The SIG MCX/MPX pistols are the by, well, pulling on it. The rods are steel and the adapter that at- most popular platform that use this interface right now, and the taches to the parent firearm is made of 6061 T6 aluminum (hard- Enables Fast Cylinder Release Even TM S&W J-FRAME DUTY/CARRY KIT FS1913 will also fit the SIG Rattler and Rock River LAR-PDS - or any coat anodized finish), so it's built for serious use. Integral socket for Under Stress for Super-Fast Reloads similar firearm with an M1913 stock interface. It's a straightforward QD pushbutton sling swivel. Length: 3.2” (fully collapsed), 5.3” (mid Improve Your J-Frame’s "strut" type brace that provides a shooting interface like factory position), 8.0” (fully extended). Due to varying tolerances between Trigger Pull This replacement thumb piece is totally rede- MCX/MPX stock. Folds to the left, so it will not interfere with the roller lock manufacturers, gunsmith fitting may be required. signed to enable positive finger contact and easy operation in just ejection port when stowed. It deploys in the blink of an eye and Replacement parts kit re- about any circumstance. No fumbling - when you need to release #100-033-457AV HKPDW Brace for H&K MP5/MP5K/ locks open with reassuring solidity via the ultra-strong, smooth- duces S&W J-Frame trigger the cylinder and get that reload done PDQ, you'll get it on the first HK53 & Clones, 5Z226D30​ ����������������� $ 263.99 PISTOL operating STEEL hinge mechanism. Locks closed, too, to prevent pull weight by as many as 3 try. Contact area is larger than the factory part, with an upgraded accidental deployment. It looks spindly, but when extended, the SBA3TM 1022 CHARGER TD - This is a 3-position Brace and mini lbs. No fitting or modifica- profile and unique golfball-dimple surface texture to give you superb TM FS1913 provides a pleasantly secure shooting platform for ac- chassis assembly for tion required. Easy trigger pull non-slip contact. Comes with a nylon bearing support to ensure curate aimed fire under stress. the Ruger ® 10/22 helps increase firing speed and accuracy. Includes reduced-power exceptionally smooth operation, too. When installed, it'll stand about #100-032-047AV FS1913 Brace for SIG MCX/MPX, ​ Charger® Takedown springs, and replacement firing pin. ab .250" above the surface of the sideplate. (You will retain your Smith's 5Z186Q65 ������������������������������������������������$ 199.99 pistol. It's made of SPECS: Kit contains replacement main spring, rebound slide spring, firing existing retaining nut.) Machined from billet steel and available in sturdy yet lightweight pin, and firing pin spring. Fits all modern centerfire J-Frame revolvers with blued carbon steel or natural silver finish stainless steel. Fits all mod- CZPDW FOR CZ SCORPION EVO reinforced molded frame-mounted firing pin. ern K, L, N and X frame revolvers, except the older 5-screw models - This quick-deploying, length- polymer (in black) and includes a "forearm" piece so your gun looks #100-007-219AV S&W J-Frame Duty/Carry Kit, ​ made after 1899. ab adjustable brace tames the sting like it came from the factory with SB's components. It will fit Char- 7F21D13 �������������������������������������������������������$ 24.65 #713-000-177AV K/L/N/X-Frame Cylinder Release, in your Scorpion's tail during sus- gers with both the standard and .920" bull barrel. Overall length of Blued, 3A49I95​ ���������������������������������������� $ 49.95 tained fire. It can be extended in firearm with Brace installed : 22.75" (brace fully collapsed), 24" (mid #713-000-178AV K/L/N/X-Frame Cylinder Release, SS, ​ one fluid motion without having to CZPDW retracted position), 25" (fully extended). 3A49C95 ���������������������������������������������������� 49.95 depress a release button. And the #100-033-460AV SBA3 1022 Charger TD Brace, ​ user can choose one of three (3) length positions, so it's totally 5Z137H15 ������������������������������������������������� $ 159.99 CYLINDER & SLIDE S&W REVOLVER adaptable to fit different shooters. There's even a socket for a stan- dard pushbutton QD sling swivel, so you can also stabilize your SBT BRACE - This is EXTRA LENGTH FIRING PIN POWER CUSTOM S&W Scorpion with a sling. The CZPDW is constructed of strong yet a side-folding Brace lightweight 6061 T6 aluminum alloy, with a tough hardcoat anod- Gives Reliable & Consistent Ignition that fits the B&T APC COMPETITION HAND GRIPS & SCREWS ized finish for excellent resistance to surface wear and corrosion. and the Heckler & .015", extra-length pin lets you use Three colors to choose from: basic Black (BLK), Flat Dark Earth Koch UMP pistols. the lightest possible mainspring weight Oversize For Fitting & Correcting Timing (FDE), and Gray. Length: 3.25" (fully retracted), 7" (mid position), All the necessary and still achieve consistent and reliable and 9.25" (fully extended). Like all SB Tactical braces, the CZPDW mounting hardware ignition. Improves firing pin strike on No more heating and bending, oversize dimensions enables handicapped shooters to enjoy shooting the CZ Scorpion is part of it. The styl- new model revolvers with the frame mounted firing pin. Drop-in fit. ab can be fitted to all S&W “K”, “L” and “N” revolvers. ab Evo, and helps other shooters enjoy shooting it even more. ing purposely replicates that of stocks B&T manufactured for vari- SPECS: Special steel, in the white. Heat treated to factory specs. .510" SPECS: Tool steel, i-t-w. Gunsmith fitting required. #100-032-040AV CZ Scorpion Evo Brace, Blk, 5Z209H05​ ���$ 223.99 ous H&K platforms. It's very basic - the OAL comes out to 10.5" - but (12.95mm) OAL. .210" (5.33mm) pin length. .071" (1.79mm) pin diameter. #713-028-002AV “K” Frame Hand, 3A23I08​ �����������������������$ 33.99 #100-032-041AV CZ Scorpion Evo Brace, FDE, 5Z209I05​ ���$ 223.99 it gets the job done! Fits J, K, L and N frames. #713-028-003AV “L” Frame Hand, 3A27M53​ ��������������������� 35.99 #100-032-042AV CZ Scorpion Evo Brace, Gray, ​5Z00IBC ����� 223.99 #100-027-722AV SBT Brace, 5Z102E86​ ��������������������������� $ 128.57 #206-000-010AV Ex Long S&W Firing Pin, 6K12B83​ ��������� $ 15.19 #713-028-004AV “N” Frame Hand, 3A23K08​ ��������������������� 34.99

order on the web

Orders: 800-741-0015 brownells.com PAGE 241 POWER CUSTOM POWER CUSTOM S&W K/L/N REVOLVER POWER CUSTOM S&W REVOLVER POWER CUSTOM RUGER® SA STAINLESS CRANE LOCK HAMMER NOSE KITS OVERSIZE CYLINDER STOP FREE SPIN PAWL™ BALL & SPRING KIT Helps Prevent Misfires Caused Improve Function & Accuracy In S & W Revolvers Quicker & Easier Loading, Unloading By Light Hammer Strikes Install one of these oversize cylinder Redesigned pawl enables faster and easier loading/un- Add Lockup Strength loading of Ruger single action revolvers. Holds the bolt away Spring-loaded, extra-long stops to help improve the function and ac- Adds extra lockup strength. 20 curacy of worn and loose Smith & Wesson from the cylinder locking notches when the loading gate is hammer nose requires less ham- open, so the cylinder can rotate freely in either direction. No Locking Balls, 20 Springs, Staking mer tension without sacrificing K, L, and N frame revolvers. CNC machined Punch and complete instructions. ab from A-2 tool steel, these stops are slightly need to spin the cylinder around again if you miss a click and reliability. Provides consistent, positive ignition and helps prevent go too far; makes it easier to set an empty chamber under the SPECS: 302 stainless, .125" (3.17mm) diam- misfires caused by weak primer strikes. Also allows you to use a oversized in width to allow for worn frame 1 hammer. Helps competitive shooters improve reload times eter balls. /4" (6.35mm) long springs. Refill contains 10 balls, 10 springs. reduced-power mainspring, resulting in lighter, smoother trigger windows and cylinder notches. ab SPECS: A-2 tool steel. Fits K, L, and N frame revolvers. and scores. Hunters, target shooters, and outdoorsmen will #713-035-000AV Crane Ball & Spring Kit, 3A17A50​ �������� $ 20.42 pull. Fully machined - not stamped - from S7 tool steel using wire enjoy the added convenience of easier reloading. ab #713-035-001AV Crane Ball & Spring Refill, 3A5C71​ ������ 6.67 EDM and CNC milling processes to ensure precision fit and long #713-000-066AV Oversize Cylinder Stop, 3A31P99​ �������� $ 40.99 SPECS: Steel. Blackhawk fits Ruger new model Blackhawk, Bis- service life. Heat-treated and case-hardened to outlast damaged or ley, pre-2005 Vaquero and Super Blackhawk single actions. Va- worn factory versions. Kit includes rivet and spring. Spare hammer quero fits the New Vaquero®, with the smaller “XR3” grip frame, nose rivets sold separately. May require some fitting. ab introduced in 2005. Single Six (S6) fits small frame Single Six REVOLVER/SILHOUETTE/ETC #713-000-167AV K Frame Hammer Nose Kit, 3A41K85​ �� �$ 46.99 SDM FABRICATING S&W REVOLVER and Bisley. Includes complete, detailed instructions. Gunsmith POWER CUSTOM CYLINDER & YOKE #713-000-168AV L Frame Hammer Nose Kit, 3A41N85​ �� � 45.99 fitting required. ENDSHAKE BEARINGS #713-000-169AV N Frame Hammer Nose Kit, 3A41J85​ �� � 45.99 THUMB LATCH #713-105-000AV Blackhawk Free Spin Pawl, 3A45L30​ ���$ 50.99 #713-000-165AV Hammer Nose Rivet, 3A5H56​ ��������������� 7.69 #713-000-077AV New Vaquero Free Spin Pawl, 3A41K59​ �� 50.99 Quickly Eliminates Excess Gives You A “No-Slip” Surface When Unlatching The Cylinder #713-105-001AV .22 Cal. S6 Free Spin Pawl, 3A45C59​ ��� 56.99 Cylinder/Yoke Endplay Thumb latch machined from bar stock gives S&W K, L and N frame It’s easy to eliminate excess cylinder revolvers true, 30 lpi checkering that “sticks” to your thumb for posi- and yoke endplay with these stainless POWER CUSTOM S&W REVOLVER tive contact when unlatching the cylinder. Shape matches the “new” steel bearings. Made by pistolsmith Ron angular style latches. Careful manufacturing processes ensure that RUGER® SINGLE ACTION NEW Power as an alternative to stretching the CUSTOM TRIGGER KIT checkering stays sharp with no peening. Requires little or no fitting. ab yoke. Whether rebuilding worn guns or SPECS: Steel, blued finish or stainless steel (SS), natural finish. 30 lpi MODEL HAMMER ASSEMBLY building custom ones, these will help turn For A Smooth, Consistent Trigger Pull checkering. Fits S&W K, L, & N frame revolvers. Factory Original Hammer Assembly out a 1st-class job. Each pak contains 10 bearings of 1 thickness. ab #864-000-023AV Thumb Latch, Blued, 4F28F57​ ���������� $ 38.99 For Repair & Restoration SPECS: Hardened 302 stainless steel. Cylinder Bearings - see chart. Yoke Precision-machined replace- #864-000-021AV Thumb Latch, SS, 4F28F57​ ���������������� 39.99 Bearings - .002" (.051mm) thick for S&W K,L,N. ment for factory trigger in cur- Finding Ruger factory parts is absolutely essential CYLINDER BEARINGS rent-production Smith & Wesson when you want to keep your favorite gun in original condition or K/L/N/X-frame revolvers has a don’t want the extra fitting that goes along with installing aftermarket STOCK # THICK FITS MODEL diamond-ground single action sear parts. Comes with plunger, plunger spring, and plunger cross pin. ab #713-100-002AV .002 (.051mm) S&W K,L,N PC-2 and hand finished contact surfaces POWER CUSTOM COLT SAA SPECS: Stainless steel (SS), natural silver finish. May require minor fitting. Fits New 1 1 ® ® ® #713-100-004AV .004 (.10mm) S&W K,L,N PC-4 for a smooth, consistent 2 /4 to 2 /2 Model Blackhawk , Super Blackhawk , and Vaquero ; will not fit Bisley model. #713-100-001AV .002 (.051mm) S&W J Centerfire PC-J2 lb. single action pull. Trigger face is rounded and polished smooth ENDSHAKE BEARINGS #780-000-535AV Hammer Assy, SS, 8G24A41​ ���������������$ 31.99

DOUBLE ACTION & T/C PARTS DOUBLE ACTION for the serious competitor. EDM and CNC machined from a solid #713-200-002AV .002 (.051mm) Sec Six, GP, R’hawk PC-R2 Quickly Eliminates Endplay billet of tool steel, with a spring steel trigger lever. Comes with hand — Advise # — Cyl Endshake Bearings, 3A13A69 ��������������� $ 16.19 torsion spring and hard pins installed. Trigger stop pin requires fitting Eliminate excess cylinder play with these stainless steel bearings. Made by pistolsmith for overtravel stop on double and single action revolvers. Extra metal ® #713-012-002AV Yoke Endshake Bearings, S&W K/L/N Ron Power. Fits on the base pin bushing be- MK TECHNOLOGIES RUGER SA only, 3A14C27​ ������������������������������������������� $ 16.79 in the right places for precise gunsmith fitting. ab SPECS: Trigger - Tool steel, in-the-white, polished. Trigger Lever - Spring tween the shoulder and the front of the cylin- CRESCENT EJECTOR ROD/BUTTON steel. .4" (10.2mm) wide shoe. Kit includes trigger, 12 lb. trigger rebound der. Fits 1st and 2nd Generation Colt SAA and spring, (2) trigger shims, and (2) trigger stop pins (one extra). Fits current- authentic reproductions only. ab Easy-To-Hit, Colt SAA-Style For production Smith & Wesson K, L, N, X frame revolvers with factory trigger. SPECS: 302 Stainless steel, .002" thick. 10 bearings Cowboy Shooters per pak. POWER CUSTOM SIDEPLATE SHIMS #713-000-101AV Custom Trigger Kit, 3A106K06​ ��������� $ 133.99 Larger, crescent size makes ejecting shells #713-100-073AV SAA Endshake Bearings, 3A13P99​ ������ $ 16.49 faster, smoother and more positive. Helps lower times, Improves S&W Trigger too. Fits all models of Blackhawk® and Vaquero®. Minor Pull - Smooths Function fitting required. ab SPECS: Blued steel. 3.8" (96.8mm) long, head .643" (16.3mm) wide. SASS legal. By taking the “slop” out POWER CUSTOM SMITH & WESSON between the S&W hammer POWER CUSTOM #737-400-001AV Blue Crescent Ejector, 7C38E46​ ���������� $ 53.99 or trigger and the sideplate, K/L-FRAME REVOLVER you can smooth up and improve trigger pull significantly. Fits S&W SINGLE ACTION REVOLVER GAS K, L & N frame only. ab TARGET HAMMER RING SHIMS POWER CUSTOM RUGER® SA SPECS: 302 Stainless steel, .002" (.0508mm) thick. Two models; #1 for Machined Steel So It'll Take a Proper Gunsmith S&W hammer pivot; #2 for S&W trigger pivot. Pak of 10. SINGLE ACTION PARTS SINGLE ACTION Action Job; Oversized Target Thumb Pad Fast, Drop-In Solution For Eliminating OVERSIZE CYLINDER LATCH STOCK # MODEL STOCK # MODEL Excess Cylinder Endshake #713-050-001AV #1 #713-050-002AV #2 Upgrade replacement for the factory hammer Gives Tighter Lockup To sports a wide thumb pad with deep, non-slip "golfball" Eliminate excess cylinder endshake on Improve Accuracy — Advise # — Sideplate Shims, 3A13E57 ���������������������������$ 15.99 texturing that target shooters will love. More impor- Colt and clones, plus all Ruger® single ac- tantly, this hammer will allow the custom gunsmith to tion revolvers with these stainless steel gas Oversized dimensions to remove the perform the necessary action job to produce a refined trigger pull ring shims. Installs between frame and the lateral play in frames and cylinders with out- and crisp, consistent hammer release. The factory hammer is an front of the gas ring to eliminate cylinder of-spec notches. Thicker and longer, for precise fitting; tightens MIM (metal injection molded) part - so basically produced just like binding caused by the cylinder face rub- cylinder lockup and helps give correct stop timing. Gunsmith fitting STRATTON CUSTOM THOMPSON CENTER plastic, only in metal. This material will not hold the custom honing bing the rear of the barrel, and helps cure headspace problems that is required. Models available for both current-production and Old and stoning required for a proper trigger job. Power Custom's part can lead to misfires. Shim thickness of .0045" accommodates most Model (“three screw”) Ruger single actions. ab HAMMER SPUR is machined and wire-EDM cut from solid stainless steel bar stock, revolvers that have cylinder endshake problems; remove material SPECS: A2 tool steel, heat treated. .097" (2.46mm) thick. New Model fits all so once the contact surfaces are honed and polished, they will not from the gas ring for “tighter” guns. Developed by master pistolsmith current production New Model single actions, Blackhawk®, Super Black- Provides Easy, Positive Cocking ® ® ® ® wear down for a long time. Assembly includes the double action Ron Power as a cost-effective alternative to stretching the gas ring. hawk , Bisley, Single-Six and Vaquero , does not fit Bearcat . Old Model Round, knurled pad for non-slip thumb sear and pinned-in mainspring stirrup; the left side of the hammer Whether you’re servicing a worn gun or building a custom one, these fits all Old Model (three screw) Blackhawk®, Super Blackhawk®, and Single purchase, gives extra reach for easy cocking of Contenders and En- has the cut for S&W's action lock. Fits post-1994 K and L frames with shims will help turn out a first-class job. Available in 10-paks. ab Six® (does not fit Bearcat®). cores equipped with a scope. May be mounted left- or right-hand; the firing pin on the frame (NOT on the hammer nose). Gunsmith SPECS: Stainless steel. .0045" thick. For guns with base pin diameter no #713-000-013AV Oversize Cylinder Latch, New Model, ​ slips over the hammer spur and locks in place. ab fitting may be required. ab larger than .260" and gas ring no smaller than .380". Fits Gen. 1, 2, 3 Colt 3A24K88 �����������������������������������������������������$ 40.99 1 3 SPECS: Aluminum, anodized, black. 1 /8" (3cm) long, /8" (9.3mm) diameter. #713-000-179AV K/L-Frame Target Hammer, ​ SA and clones, and all Ruger SA revolvers. #713-000-093AV Oversize Cylinder Latch, Old Model, #100-000-522AV TC Hammer Spur, 5K15K11​ ����������������� $ 18.19 3A00EGE ���������������������������������������������������$ 159.99 #713-000-080AV SA Gas Ring Shims, 10-pak, 3A14Q29​ ��� $ 17.99 3A32K31 ������������������������������������������������������� 41.99

GUARANTEED. FOREVER.®

PAGE 242 SINCE 1939 Office/Tech: 641-623-5401 ® SMITH ENTERPRISE COLT SAA REVOLVER/SILHOUETTE/ETC POWER CUSTOM RUGER SA POWER CUSTOM COLT SINGLE RUGER® SA REVOLVER HALF-COCK HAMMER & ACTION ARMY TRIGGER SAA BOLT & HAND BASE PIN LATCH KIT Restore Your Old Single Action TRIGGER KIT Rebuilding, Accurizing, Replaces Commonly Lost Revolver’s Trigger Tuning & Restoration Parts; Don’t Leave Home Gives An Instant Trigger Job Machined steel replacement for factory trigger has Heat-treated, spring Without It extra metal in the right places to resist breakage. Sear steel, hardened and over- CNC machined hammer and trig- contact surface and other contact areas are oversized to If you do a lot of shooting, you’re bound to wear out or lose those size action parts for rebuilding and accurizing Colt Single Action small parts critical to securing the base pin in the cylinder. This kit ger reduce pull weight to an easy- allow gunsmith fitting for a tight action, smooth pull, and Army revolvers. Bolts are radiused between the forks to resist break- 1 safeguards against down time at the range or failure to complete breaking 2 /2 to 3 pounds. Smoothly crisp letoff. Uses existing sear and spring. Constructed of age, extra wide lug provides for exact fit to cylinder locking slots. 1st all the stages at your next Cowboy Action event due to a base pin contoured trigger face gives a lighter heat-treated carbon steel, blued finish. ab Gen. bolt is shaped and contoured to match the original. 2nd/3rd feel. Half-cock notch provides an ad- SPECS: Heat-treated steel, blued. Gunsmith fitting required. Fits Colt Sin- working loose. Kit includes a genuine factory latch and nut, plus the Gen. bolt will fit all 1st, 2nd and 3rd generation guns. Hand, fits 1st Wolff extra power base pin spring you want for improved function ditional click when cocking, located gle Action Army and clones, including Uberti, EMF, and Armi San Marco. and 2nd generation guns. ab so chambers will line up with loading #713-000-084AV Colt SAA Trigger, 3A30P00​ ������������������� $ 40.99 and longer service life. ab Bisley Kit shown SPECS: 1065 spring steel. Blue, polished finish. Rc 40-42. All will require SPECS: Steel, blued finish. Includes factory base pin latch and nut, Wolff gate. Allows cylinder to rotate without gunsmith fitting. ® ® opening loading gate. Raised boss around hammer pivot hole elimi- extra power base pin spring. Fits Blackhawk , Super Blackhawk , Super #851-000-021AV 1st Generation Bolt, 1E61N54​ ���������������$ 79.99 ® ® ® nates side play; honed and polished engagement surfaces provide Blackhawk Hunter, Maximum Blackhawk , Bisley, Vaquero , and New #851-000-022AV 2nd/3rd Generation Bolt, 1E61D54​ ����� 79.99 ® ® consistent trigger release. Requires no modification to grip frame. POWER CUSTOM RUGER® SA Vaquero , and Single Six . Hammers provide a drop-in fit only when used with Power Custom #851-000-023AV 1st/2nd Generation Hand, 1E61E54​ ����� 79.99 #080-000-372AV Ruger Base Pin Latch Kit, 8K11E75​ ������� $ 14.99 trigger. Requires gunsmith fitting/alteration to factory trigger. ab COLT-STYLE GRIP FRAME SPECS: Steel, polished blue or bright polished, natural finish. Hardened to Rc 56-58. Kits include 17 lb., 18 lb. and 19 lb. hammer springs, 30% Fits Your Hand To Improve reduced power trigger spring and extra power cylinder latch spring. Control POWER CUSTOM RUGER® LARGE FRAME Get the Colt-grip feel on DOUGLAS RUGER SA STANDARD HALF-COCK HAMMER & TRIGGER KIT - your large-frame, Old Mod- SINGLE-ACTION REVOLVER BASE PINS Duplicates the clean, simple styling of the factory hammer. el, Ruger single action. CNC ® ® Eliminates Cylinder Wobble HANDGUN BARREL SPECS: Fits new model large frame Blackhawk , Super Blackhawk and machined, two-piece, steel ® Vaquero . grip frame is slightly smaller Oversized replacement base #713-020-000AU Standard Half-Cock Kit, Blue, ​ than the Ruger factory origi- pins for Ruger single action revolvers 3A137C10 ������������������������������������������������ $ 175.99 nal, with a shorter reach, too. help reduce cylinder “wobble.” Re- .38/.357 Blanks In 1-10 & 1-14 Twist, Plus .44 & .45 Oversize for precise fitting/finishing; requires no modifications to #713-000-039AU Standard Half-Cock Kit, Silver, ​ designed head offers a more positive Famous Douglas Double XX premium quality blanks in the two frame. Heel is designed for easy modification to a birdshead shape. 3A154P24 ������������������������������������������������ 201.99 grip for easy removal. Pins are shorter most popular twist rates for PPC and other precision shooting. 1-14 Accepts 2nd and 3rd Generation Colt grips (may require fitting). ab than factory originals, allowing for longer ejector rod travel and im- duplicates the Python twist rate that is given much of the credit SPECS: 4140, steel in-the-white, 240 grit finish. Fits all Old Model (three RUGER BISLEY HAMMER/VAQUERO TRIGGER KIT - Hammer proved ejection. Minor fitting may be required. ab for the Colt’s accuracy. 1-10 rate gives superb accuracy with 148 screw) Blackhawk and Super Blackhawk frames. features gracefully shaped and well-defined serrations for excel- SPECS: CNC machined 4140 steel, blued. 2.875" pin fits Ruger New grain wadcutters and the heavier bullets needed to keep the .357 lent thumb purchase. Low, round spur is great for scope-equipped #713-000-019AV Colt-Style Grip Frame, 3A191N84​ ������ $ 226.99 Model Blackhawk®, Vaquero®, Super Blackhawk and Bisley™. 2.75" pin ® competitive in silhouette. ab fits Ruger New Vaquero , and Bisley™. 1 guns. SPECS: 4140 CM Steel. 27 /2" (69.8cm) rough blank, finishes to 1.2" (3cm) O.D. SPECS: Fits Bisley frame with no modifications. #713-000-156AV Lrge Frame Base Pin, 2.875", 3A29D68​ ��� $ 38.99 STOCK # GROOVE DIA TWIST LENGTH #713-000-009AU Bisley Kit, Blue, 3A148J99​ �������������������� $ 190.99 #713-000-157AV Lrge Frame Base Pin, 2.75", 3A29B42​ ������� 38.99 1 #237-358-014AV .357 1-14 27 /2" #713-000-042AU Bisley Kit, Silver, 3A146I99​ ������������������ 177.99 ® RUGER SA 1 #237-358-010AV .357 1-10 27 /2" 1 RUGER BISLEY HAMMER & VAQUERO TRIGGER - Graceful styling ROUND HAMMER STRUT #237-429-016AV .429 1-16 27 /2" 1 #237-451-016AV .451 1-16 27 /2" and serrations of the Bisley-styled hammer. Drop-in fit for new Gives Smoother Cocking & TAYLOR model large frame Blackhawk, Super Blackhawk, and Vaquero. — Advise # — Douglas Blank, 7C204E10 ������������������������ $ 233.99 SINGLE ACTION PARTS SPECS: Fits new model Blackhawk, Super Blackhawk, and large frame Consistent Hammer Drop CARTRIDGE CONVERSION CYLINDER Vaquero with no modifications. Holds mainspring in alignment, prevents spring kink and bind- Switch From Percussion To Cartridge By ing for consistent hammer drop and improved ignition. Round strut #713-000-045AU Bisley/Vaquero Kit, Black, ​ Changing Cylinders 3A148L99 ������������������������������������������������ $ 190.99 helps provide a smoother feel when cocking. Saves time and effort, #713-000-046AU Bisley/Vaquero Kit, Silver, ​ eliminates the filing and polishing necessary to remove the burrs Six shot conversion cylinder allows you 3A148G99 ������������������������������������������������ 193.99 and rough edges on the stamped, factory part. Assembled with a 17 to fire .45LC cartridges in your steel frame pound Wolff hammer spring and ready to drop in. ab .44 caliber cap-and-ball revolver. To load, SHILEN HANDGUN BARREL SPECS: Steel. Fits Blackhawk®, Super Blackhawk® and Old Vaquero®. Will simply remove the cylinder, remove the RUGER COLT-STYLE HAMMER & NEW VAQUERO® TRIGGER KIT not fit the New Vaquero with the smaller grip frame. backplate, drop cartridges into the cylin- - Original Colt SA styling. Features a Colt #078-000-019AV Ruger Round Hammer Strut, ​ der, replace the backplate, and reinsert the style hammer, standard trigger, 30 oz. 8G22G99 ����������������������������������������������������� $ 27.99 cylinder. Indexing pin on cylinder ensures trigger spring, 14 lb. hammer spring, and the floating firing pins in the backplate align Match-Grade Blanks For Custom Revolvers, extra-power base pin latch spring. properly with the chambers. Cylinders are Silhouette Guns & More SPECS: Steel, blue finish or bright polished, available for reproduction .44 1858 Rem- Famous Shilen accuracy in barrel blanks for silhouette or custom silver finish. Fits small frame New Vaquero ington, .44 Walker Colt, and .45 Ruger® Old hunting handguns. Available in chrome moly or stainless steel (.38 and 50th anniversary Blackhawk models with Army®. For use in steel frame revolvers with and .44 cal. only). Stainless barrels are hand lapped at the factory. ab internal hammer lock and XR-3 grip frame. RUGER HAMMER & TRIGGER SHIMS - Eliminates excessive side-to-side movement of hammer BLACK POWDER cartridges or black powder SPECS: 4140 chrome moly or stainless steel (Stnls). 1.250" (31.8cm) di- #713-000-073AU Colt-Style/New Vaquero Kit, Blue, ​ and trigger for wobble-free cycling. Available in equivalent cartridges ONLY. DO NOT use in ameter. 3A137B99 ������������������������������������������������ $ 167.99 brass frame revolvers or with jacketed bul- 10-paks. STK# 14" LONG STK# 28" LONG CALIBER GROOVE DIA. TWIST #713-000-081AU Colt-Style/New Vaquero Kit, Silver, ​ SPECS: Stainless steel. .002" thick. Fits all Ruger SA lets. No FFL required to purchase. ab NA #787-222-160AV .22 Rimfire .222 1-16" 3A176C77 ������������������������������������������������� 189.95 revolvers except Bearcat. Pak of 10. SPECS: Steel, blue, polished finish or stainless steel finish. .45 Colt black powder cartridges or NA #787-224-140AV .22 Centerfire .224 1-14" #713-000-063AV Hammer Shims, 3A15N38​ ��������������������� $ 19.49 cowboy action loads only. Chamber length - #787-037-140AV NA .38 .357 14" RUGER ALTERED TRANSFER BAR - Re-designed, drop-in #713-000-064AV Trigger Shims, 3A15G38​ ����������������������� 19.49 1.625" (4.1cm). May require fitting to cylinder pin. transfer bar gives a Ruger single action the feel and opera- #787-037-940AV NA .38 Stnls** .357 14" tion of a Colt single action. Allows loading gate to open with RUGER LARGE FRAME SA LOADING GATE SPRING - Heat-treated, STOCK # FITS PRICE NA #787-429-200AV .44 .429 20" BARRELS hammer at half cock. Cylinder can then rotate clockwise loading gate spring has more metal in areas #633-185-101AV Pietta, 1858 Rem., Blue 3C260Q09 $ 305.99 #787-042-900AV NA .44 Stnls** .429 20" and the pawl is functional. For use with Power Custom Half needing additional strength and less metal in #633-185-102AV Uberti, 1858 Rem., Blue 3C257J25 $ 280.99 NA #787-451-160AV .45 .451 16" Cock Hammer/Trigger Kits. Saves time and effort modifying thinner areas for a lighter, softer spring. Drops 3C225M88 the factory part. in all large frame Ruger SA revolvers. #633-185-103AV Ruger, Old Army, Blue $ 277.99 **14" Stainless blanks are priced higher -see priceline below SPECS: Steel, in-the-white. Fits new model Blackhawk, Super Blackhawk, SPECS: Heat-treated spring steel, in-the-white. Fits #633-000-001AV Ruger, Old Army, SS 3C262I80 $ 322.99 — Advise # — 14" Unturned Blank, 7H88B29 �����������������$ 111.99 and large frame Vaquero with no modifications. large frame Ruger SA revolvers. #633-000-004AV Uberti, 1858 Rem., SS 3C296H31 $ 312.99 — Advise # — **14" Stnls Unturned Blank, 7H124C71 �� 153.99 #713-000-047AU Altered Transfer Bar, 3A28C99​ �������������$ 38.99 #713-000-065AV Loading Gate Spring, 3A27F65​ ����������� $ 43.99 #633-000-005AV Uberti, Walker Colt, Blue 3C250J60 $ 307.99 — Advise # — 28" Unturned Blank, 7H171K43 ��������������� 192.99

order on the web

Orders: 800-741-0015 brownells.com PAGE 243 CLARK CUSTOM S&W PRO-SPRINGS™ FOR ACTION-TUNING by WOLFF LEE’S GUNSMITHING SINGLE ACTION PPC MATCH BARREL GUNSLINGER SPRING KITS “Guaranteed Superior” Lightens Trigger Pull & Competition Quality, Brownells Pro-Spring™ Kits are made from the very finest high- #080-665-101AV Kit RDA0191, 8K9M05​ �����������������������������$ 10.99 Easy Installation tensile spring wire - wire that is formulated and drawn especially­ for Smoothes Action Cycling RGP-103 FOR RUGER GP100® - Contains (3) RP hammer springs: 9 finest quality springs. The tension is actually built into the wire as it is High-quality springs lb., 10 lb., and 12 lb. (factory is 14 lb.), plus (2) RP trigger springs, 8 lb. Easily converts S&W revolvers to PPC-style. Fully threaded, being drawn - not added afterwards by heat treating. Consequently, provide smoother action and 10 lb. (factory is 11 lb.). Gives choice of best springs for individ- indexed to factory specs with the extractor rod relief already cut. Brownells Springs will continue to function correctly and continu- function and operation, ual gun. Reduces, smooths hammer actuation and trigger pull, yet Ready for finishing. Machined from Douglas blanks. ab ally, long after many of the other springs have taken on so much plus reduce felt trigger pull. ensures reliability on factory issued or professionally tuned guns. SPECS: Chrome moly steel, 6" (15.2cm) long. K-round: 1.1" (28mm) dia. “set” that they have lost their ability to return to the required length Coil springs are slightly re- 1 lb. 4 oz. (567 g). K-slab: .9" (22.8mm) across flats. 1 lb. 2 oz. (510 g). and tension you need. #080-665-103AV Kit RGP-103, 8K7G96​ ����������������������������� $ 11.99 duced in diameter to elimi- Gunsmith fitting required. It’s simply not worth taking a chance when the best quality nate guide rod spring bind. #181-379-101AV K-Round PPC Barrel, 1H159I66​ ���������� $ 194.99 springs are only a small part of the project. Try Brownells Pro-Spring Colt hammer spring is narrowed along the sides, maintains strength #181-379-111AV K-Slab PPC Barrel, 1H201D68​ ������������ 241.99 Kits and find out for yourself the satisfaction of using a really good FOR S&W K, L, N FRAME REVOLVER and reduces cocking effort; trigger spring is durable wire-type. ab gun spring - designed and made expressly for us by Wolff, the Dean REVOLUTIONARY POWER RIB™ DESIGN SPECS: Spring steel. Includes hammer and trigger springs. Fits Colt Single of quality gun springs for the professional firearms industry. ab Action Army and clones.

REVOLVER/SILHOUETTE/ETC SPECS: RP = Reduced Power, XP = Extra Power, FSW = Factory Standard Kits contain a new flat mainspring with a unique, Power Rib™ #100-000-509AV Colt SAA Spring Kit, 5K23E80​ ���������������$ 31.99 Weight designed by Wolff that is slowly “squeezed” ® BANG, INC. S&W K/L/N REVOLVER FOR RUGER SINGLE ACTION REVOLVER into place for correctly MICULEK REVOLVER SPRING KIT An excellent flowed grain structure base from which of the spring steel. Fast Trigger Action & Reduced Pull Weight For to build a beauti- Gives fantastically im- Competition & Speed Shooting fully smooth and proved smoothness WILSON COMBAT “CUSTOM TUNE” reliably function- and consistency of pull. Eliminates any possibility of stacking and REVOLVER SPRING KITS Balanced compression and rebound rates allow ham- ing gun. Includes a provides optimum hammer actuation - the likes of which you have mer spring and trigger return spring to work in unison. longed for in the action-tuning jobs you have done on S&W’s in the redesigned trigger Add Reliability, Improve Function Together, they give a seven pound, double action trigger spring and a reduced power hammer spring to give controlled trig- past. (Requires unaltered strain screw). pull with a fast trigger return. Recontoured hammer spring ger pull. Also includes extra power, base pin latch spring. Factory SWK/L/N-201 - Reduced power kit with lighter than stock Power High quality springs drop-in to improve handgun performance. helps smooth trigger pull, prevents stacking. ab hammer spring is 23 lb. High tensile strength wire delivers reliable function. ab SPECS: Spring steel. Fits K, L and N frame revolvers. For best Rib mainspring plus 13, 14, and 15 lb. rebound springs for precise tuning. Lightens trigger pull and gives superior smoothness and SPECS: Kit contains one each of the springs listed below. RP = Reduced results, ammo should use Federal primers. RSA-003 17 LB. FOR NEW MODEL - Kit contains one 17 lb. ham- Power, XP = Extra Power.

SPRINGS consistency of both double and single action pull. #100-000-223AV Miculek S&W Spring Kit, 2K16E92​ �������$ 22.99 mer spring, 35% reduced power trigger spring and extra power base pin latch spring. #080-665-201AV Kit SWK/L/N-201, 8K16F32​ ������������������ $ 19.99 #246 RUGER GP 100 - RP 9, 10, and 12 lb. hammer springs; RP 8 and 10 lb. trigger return springs. #080-665-003AU Kit RSA-003, 8K12Q29​ ��������������������������� $ 15.83 SWK/L/N-202 - Standard power kit with a Power Rib™ mainspring #965-246-000AV Wilson Kit #246, 5F8B67​ ������������������������$ 9.95 RSA-100 19 LB. FOR NEW MODEL - Kit contains 19 lb. hammer that duplicates the factory spring’s rate. Gives positive ignition of spring, 35% reduced power trigger spring and extra power base magnum primers, vastly improved smoothness and consistency of #297 RUGER SUPER REDHAWK - RP 9, 10, and 12 lb. hammer HEINIE SINGLE ACTION pin latch spring. pull. Includes 13, 14, and 15 lb. rebound springs for precise tuning. springs; RP 10 and 12 lb. trigger return springs. #080-665-202AV Kit SWK/L/N-202, 8K16I13​ ���������������������$ 19.99 TRIGGER/BOLT SPRING #080-665-100AU Kit RSA-100, 8K12P28​ ����������������������������� $ 15.83 #965-297-000AV Wilson Kit #297, 5F7G80​ ������������������������ $ 8.95 #176 RUGER SINGLE ACTION - 30 oz. RP trigger spring; 19 lb. RP RSA-108 FOR OLD ARMY® AND OLD MODEL - Kit contains 19 lb. SW-MS-222 - The same Power Rib™ mainspring used in the SWK/ hammer spring; XP cylinder latch spring. Modern Design Improves Reliability hammer spring, 25% reduced power trigger spring, and increased L/N-201 kit above. 1 spring or 10 spring packages. power, base pin latch spring (use on old model only). #080-665-210AV SW-MS-222 Mainspring, 8K14D05​ �������$ 16.99 #965-176-000AV Wilson Kit #176, 5F12A16​ ����������������������� $ 13.95 Stronger wire spring replaces the flat leaf trigger spring in the #080-665-108AU Kit RSA-108, 8K7B18​ �������������������������������� $ 9.99 #080-665-211AV SW-MS-222 Mainspring, 10-pak, ​ #349 RUGER SP 101 - RP 10 and 12 lb. hammer springs; RP trigger Colt Single Action Army and clones for improved reliability and 8K140B55 ��������������������������������������������������� 169.99 return spring. smoother function. Gives cleaner letoff for better accuracy. ab RSA-106 FOR NEW MODEL - Kit includes (3) different, reduced #965-349-000AV Wilson Kit #349, 5F7F80​ �������������������������� $ 8.95 SPECS: Spring steel. Fits Colt SAA, EMF Hartford, other clones. power hammer springs; 17 lb., 18 lb. and 19 lb. (Factory is 23 lb.), SW-MS-223 - The same Power Rib™ mainspring used in the SWK/ #394-630-000AV Trigger/Bolt Spring, 4C6C21​ �������������������$ 7.49 (1) 35% reduced power trigger spring, plus (1) extra power base L/N-202 kit above. 1 spring per package. #321 SMITH & WESSON J - RP 8 lb. hammer spring; RP 13, 14, and pin latch spring. #080-665-220AV SW-MS-223 Mainspring, 8K14G13​ �������$ 16.99 15 lb. rebound springs. #080-665-106AU Kit RSA-106, 8K16L58​ �����������������������������$ 19.99 #965-321-000AV Wilson Kit #321, 5F7N80​ �������������������������$ 8.95 #969-000-163AU 30 oz. Reduced Power Trigger Spring, ​ FOR S&W J-FRAME REVOLVER #178 SMITH & WESSON K, L, & N - RP mainspring; RP 12, 13, and 9F6J16 ��������������������������������������������������������� 7.99 14 lb. rebound springs. SWJ-200 FOR S&W J-FRAME - Contains (3) different rate RP re- ISMI S&W REVOLVER #969-000-150AU Ruger SA Trigger Return Springs, #965-178-000AV Wilson Kit #178, 5F12Q16​ ��������������������� $ 13.95 3-pak, 9F16I17​ ������������������������������������������� 19.99 bound springs: 13 lb., 14 lb., and 15 lb. to give you the proper selec- CHROME SILICON SPRINGS tion, plus (1) RP hammer spring. RSA-107 FOR OLD MODEL AND OLD ARMY - Kit includes (3) dif- #080-665-200AV Kit SWJ-200, 8K9F05​ ���������������������������� $ 10.99 Consistent, Reliable ferent, reduced power hammer springs; 17 lb., 18 lb. and 19 lb. Performance With No Stacking; (Factory is 23 lb.), (1) 25% reduced power trigger spring, plus one Won’t Take A Set extra power base pin latch spring. #080-665-107AU Kit RSA-107, 8K12Q19​ ����������������������������� $ 15.73 WISNER COLT SAA ™ Premium quality springs manufactured to ISO 9002 quality WHY ARE PRO-SPRINGS SO GOOD? ™ REDUCED POWER SPRING KIT control standards from aerospace-grade chrome silicon steel for FOR RUGER® DOUBLE ACTION REVOLVER Brownells Pro-Spring Kits are made from the very finest consistent, reliable performance and superior durability. Your trig- high-tensile spring wire that is formulated and drawn ­especially Lightens & Smooths Felt ® for the finest quality springs. The tension is actually built into ger pull feels better, and your gun performs consistently and reli- RRH-102 FOR RUGER REDHAWK - Kit contains (3) different, RP Trigger Pull ably. These springs maintain a constant compression rate so they hammer springs with each hammer spring having a different pow- the wire as it is being drawn - not added afterwards by heat don’t stack as spring tension increases. Heat treated, shot peened, er output. Smooths hammer, reduces trigger, maintains reliability. treating. Consequently, Brownells Springs will continue to Kit contains a medium weight function correctly and continually, long after many of the other and stress relieved to retain loading capability through thousands of #080-665-102AU Kit RRH-102, 8K8A14​ ������������������������������ $ 10.40 hammer spring that reduces ten- compression cycles without taking a set. Trigger Rebound Spring springs have taken on so much “set” that they have lost their sion for easier trigger pull, plus me- provides a 10% reduced-power (approximately 16.2 lbs.) loading for SRH-104 FOR RUGER SUPER REDHAWK - Includes (3) different RP ability to return to the required length and tension you need. dium and light sear/bolt springs; lets a lighter, more consistent trigger pull from J, K and L frame revolvers. hammer springs: 9 lb., 10 lb., and 12 lb. (factory is 14 lb.), plus (2) RP It’s simply not worth taking a chance when the best quality you select the best combination for Hammer/Trigger Spring Pak adds a factory-weight hammer spring trigger springs: 10 lb. and 12 lb. (factory is 15 lb.). springs are only a small part of the price of the job - the labor a reliable trigger release. ab costs are the same with bad springs - or Brownells Pro-Spring for consistent let-off and positive ignition. ab #080-665-104AU Kit SRH-104, 8K9Q40​ ����������������������������� $ 11.93 SPECS: Spring steel. For Colt Single Action and clones. Sold as a pack of SPECS: Chrome silicon steel wire. Kits. Buy Brownells Pro-Spring Kits and find out for yourself the three springs. Gunsmith fitting may be required on 3rd Generation Colts #445-000-026AV S&W Trigger Rebound Sprg, 5D4D59​ ��� $ 7.89 RDA-101 FOR RUGER DOUBLE ACTION - Contains a RP trigger satisfaction of using a really good gun spring - designed and and various clones. made expressly for us by Walter Wolff, the Dean of quality gun BARRELS #445-000-025AV J-Frame Hammer/Trigger Spring Pak, ​ spring and a RP hammer spring for Ruger Security Six, Speed Six #895-001-000AV Colt SAA Reduced Power Spring Kit, ​ springs for the professional firearms industry. 5D6K90 ��������������������������������������������������������� 8.99 and Service Six. 5H26D61 ���������������������������������������������������� $ 34.99

GUARANTEED. FOREVER.®

PAGE 244 SINCE 1939 Office/Tech: 641-623-5401 REVOLVER/SILHOUETTE/ETC SPRINGS GRIPS - - 65.99 58.99 60.99 $ 54.99 $ 52.99 ​ $ 37.99

245 ab MODEL RSB-G/D RHK-G/D SN-G/D SN-GRD ​ ​

����������� ​

® PAGE ® ��������������������������������������� - PACHMAYR FITS Super Blackhawk ® � ������������������������������������������������ ������������������������������������������������� �������������������������������������������������� �������������������������������������������������� ​5K51L27 For Greater Shooting Comfort Shooting Greater For Ruger Ruger Redhawk Sq. Butt S&W “N” Rd. Butt S&W “N” PACHMAYR Specially formulated Decelerator rubber Decelerator Specially formulated DECELERATOR™ GRIPS DECELERATOR™ Decelerator Rubber Absorbs Recoil Force Force Recoil Absorbs Rubber Decelerator Contender Pistol Grip, only, 5K51I08 Contender Forend, Only, TCF-1 5K54J42 5K49G01 S&W J Frame G10 Grips, Gray/Black, S&W J Frame G10 Grips, Gray/ Ruger SP-101 Black, G10 Grips, Red/Black, Ruger LCR 5K49A01

ab - Decelerator Gripper Grip, 5K30K71 Decelerator ab Molded rubber. fits 10" and 14" T/C Contend black. Forend fits 10" and 14" rubber, Molded neoprene G10 TACTICAL REVOLVER GRIPS REVOLVER TACTICAL G10 Looks (TheLooks Not You) Gun, STOCK # STOCK The 1911 crowd and other semi- The 1911 crowd Gives You a Superb Hold on the the Hold on a Superb You Gives Revolver, Plus Eye-Catching Good Good Eye-Catching Plus Revolver, #692-034-001AV #692-451-001AV - Ab GRIP & FOREND FOR THOMPSON/CENTER CONTENDER sorbs felt recoil and recoil sorbs felt more a provides consis secure, tent grip on your Thompson/Center Contender pistol accurate more for shot placement. Recoil-reducing the shooter’s hand, internal chambers in the pistol grip protect control grip diamond pattern molded-in and finger grooves while contact with secure provides forend to counter muzzle rise. Soft installation drop-in the range. Easy, or on in the field shooting rest include to gun. Grip and forend no permanent alterations requires sling swivel studs. SPECS: pistols. T/C G2 Contender fits all calibers of Grip Pistol barrels. ers with round compound isolates your hand from recoil force. Finger groove, groove, Finger force. recoil from hand your isolates compound to counter muzzle rise. control gripper design increases SPECS: SPECS: #692-032-002AV #692-032-001AV #692-030-004AV #692-030-001AV — Advise # — #692-000-070AV #692-000-068AV #692-000-067AV efits of grips made from ultra-durable ultra-durable grips made from efits of composite. G10 fiberglass-reinforced to the us who've stayed faithful so can those of finally, And now, grips with neatly "boot" full wrap-around are wheelgun. These whole The grooves. finger contoured and panels side checkered revolver. together to give you a superb hold on your works package all and frame, grips, butt - revolver's the installed, grips these With an is there (Note: point. widest its at wide 1.25" approximately is - G10, only.) panel right-side the on screw grip recessed but exposed just chemicals, and water, cold, to heat, course, is highly resistant of can cause traditional wood, that about any other nasty conditions grips to fail. Almost as a bonus, G10 has a non-slip or even rubber, hand in your squirming around the gun from keep surface that'll sacrifice skin to hang onto your to you'll have that but isn't so rough so when in contrasting colors, can be laminated pistol. G10 material abstract color patterns interesting away, is machined the material two-tone a unique, eye-catching these grips have So all of appear. color scheme. auto fans have long enjoyed the ben long enjoyed auto fans have - - - - ab $ 7.39 35.99 $ 9.59 ab $ 10.19 $ 19.99 $ 41.99 $ 18.99 �� ������ ����������������� ​

�������������������� Concealment- The innovative The innovative ​8K27D66 �� ���������������������� Friendly Grip That That Grip Friendly ​8K14B55 � ������������������������� Also Cushions Recoil Cushions Also ab Guardian Grip solves Guardian the age-old problem ​9F6Q24 " (3.5cm) long. Brass nut. Sold " (3.5cm) 8 ​9F8Q19 / 3 ​9F8L15 ​2C15A48 ab ������������������������������������������������� SMITH & WESSON J-FRAME SPRING KITS SPRING ab ab Counterbore, 6 Escutcheon Screws, 12 Escutcheon Screws, REVOLVER WOLFF GUARDIAN GRIP GUARDIAN 669 Shooters Pak, Ruger SP101 Kit, Ruger SP101 Taurus Shooters Pak, Taurus 5K30P75 S&W J-Frame Guardian Grip, S&W J-Frame - Contains (1) 9 lb., (1) 10 lb., and (1) 12 lb. re (1) 10 lb., and (1) 9 lb., KIT - Contains ® ESCUTCHEON SCREWS Revolver not included " (4.76cm) long, .250" (6.3mm) dia. drill rod stock. .125" (3.17) stock. .125" (3.17) drill rod dia. long, .250" (6.3mm) " (4.76cm) 8 / 7 18-8 stainless steel. 5-40 screws, 1 18-8 stainless steel. 5-40 screws, PACHMAYR Popular - Ever In Demand Ever - Popular For pistol grip escutcheons. Escutcheon head countersunk for Escutcheon head countersunk for For pistol grip escutcheons. For Repair Or New Grips; Ever Or New Grips; Ever Repair For #969-171-900AV #969-171-130AV #969-301-510AV of compact, concealed-carry revolvers: you need to keep the grip you need to keep compact, concealed-carry revolvers: of really but then recoil concealment, small so as not to compromise a unique spring-loaded tears up your hand. This grip incorporates but a you grasp the grip (there's extends AS finger extension that duced power hammer spring for tailoring trigger pull.Includes (1) (1) trigger pull.Includes tailoring spring for power hammer duced spring. trigger return power 8 lb. reduced Taurus - Fits small-framed PAK & 605 SHOOTERS 85, 73, TAURUS 11 - FSW spring, hammer lb. 9 (1) includes Kit 605. and 85 Models 73, lb. FSW - 14 spring, lb. trigger return (1) 6.5 lb.; (1) 9 lb. and (1) 10 lb., - Kit contains “A” PAK 669 SERIES SHOOTERS TAURUS 10 lb. power hammer spring. (1) (1) 11 lb., and (1) 12 lb. reduced 669, 66, spring. Fits 65, power trigger return and (1) 11 lb. reduced 82 and 83. 80, 689, ton) and turns the ordinarily dodgy J-frame two-finger hold into a dodgy J-frame ton) and turns the ordinarily carries stance. So... the Guardian three-finger secure, much more handle but turns into an J-frame round-butt your typical tiny, like Excellent! the revolver. grips as you present set of almost-full size durable, heat-/wear-/weather-/chemical-resistant Made out of with speedloaders. Molded-in Does not interfere synthetic rubber. on the side panels enhances your hold on your Smith. checkering with J-frame Fits grip! your daily concealed-carry a Guardian Make grip frame. rounded SP101 RUGER #692-000-041AV #080-034-600AV in paks of 6 or 12 only. of in paks - Drills perfect, proper- BORE - Drills perfect, SCREW COUNTER ESCUTCHEON the for fitting holes and countersinks all in one Escutcheon Screws Brownell chip won’t speeds, slow at Use step. easy or splinter fine wooden grips. 1 SPECS: sunk on one side for attractive outside appearance when installed. Sol attractive sunk on one side for length. to desired being cut id stainless steel, end won’t rust after SPECS: dia. shaft, M2 tool steel Rc 56-58, blued finish. M2 tool steel Rc 56-58, dia. shaft, screw head; nut is round, milled edges (as is head), slightly counter head; nut is round, screw #080-034-012AV #080-034-006AV , - - - ® order on the web 5.59 6.19 6.19 6.79 9.29 $ 7.59 $ 6.79 15.49 ​ ​ $ 10.29 $ 15.49

​ ​

ab brownells.com , or other Ruger sin , or other Ruger ® SA ® ������������������������������������ ������������������������������������ ������������������������������������ ������������������������������������� �������������������������������������� ������������������������������������������� ��� ������������������������������������������������ ���� ������������������������������������������������ ​9F4F78 ​9F4F78 ​9F4H78 �������������������������������������������������������� ​9F4E10 ​9F4J13 ���������������������������������������������������������� ​9F7C69 , Blackhawk, 50th Anniversary New Blackhawk, Su RUGER WOLFF ® 30/14 Reduced Power Shooters Pak, Reduced 30/14 9F10M64 Power Shooters Pak, Reduced 40/14 9F10A64 17 lb. Reduced Power Hammer17 lb. Reduced Spring, Power Hammer18 lb. Reduced Spring, Power Hammer19 lb. Reduced Spring, 9F6F41 9F6H35 30 oz. Reduced Power Trigger Spring, Power Trigger 30 oz. Reduced Spring, Power Trigger 40 oz. Reduced 15 lb. Reduced Power Hammer15 lb. Reduced Spring, Reduced Power Hammer SpringReduced Pak, Power Hammer lb. Reduced 14 Spring, , 50th Anniversary Blackhawk , 50th Anniversary ® Fits Single Six, Blackhawk, Super Blackhawk, Super Blackhawk Fits Single Six, Blackhawk, Super Blackhawk, Super Blackhawk Fits New Model Vaquero and New Blackhawk 50th Anniversary Fits New Model Vaquero Fits small frame New Vaquero and 50th Anniversary New Black Fits small frame New Vaquero Spring steel, natural finish. Spring steel, natural PAKS SHOOTERS BLACKHAWK AQUERO/ANNIVERSARY Fits Single Six AQUERO/BLACKHAWK HAMMER SPRINGS - Lighter than AQUERO/BLACKHAWK Shots, Helps Improve Accuracy Improve Helps Shots, We’ve carried these high-quality carried these high-quality We’ve For A Smooth Action, Fast Follow-up Follow-up Fast Action, A Smooth For #969-000-157AV #969-000-156AV #969-000-159AV #969-000-160AV #969-000-158AV #969-000-163AV #969-000-162AV #969-000-200AV #969-000-198AV #969-000-197AV New Vaquero with XR-3 grip frame, and large frame Vaquero. with XR-3 grip frame, and large New Vaquero SPECS: SPECS: standard factory, than lighter Substantially - HAMMER SPRINGS shots. easier cocking and faster follow-up 23-lb. springs for SPECS: frame Vaquero. and large Maximum Blackhawk, Bisley, Hunter, NEW V easier cocking. Available smoother, the 17-lb. factory spring for 14-, and 15-lb. weights, or in a Pak with one each individually in 14- to find the weight 15- and 16-lb. springs, so you can try all three best in your gun. works that SPECS: hawk with XR-3 grip frame. - Choice of two levels of reduced let-off force force let-off reduced levels of two SPRINGS - Choice of TRIGGER and faster shooting accuracy, smoother trigger pulls, greater for cowboy competition. for times. Great Maximum Blackhawk, Bisley per Blackhawk, Super Blackhawk Hunter, gle-action revolver, a lighter cocking pull and ultra-smooth trigger a lighter cocking pull and revolver, gle-action the factory for high-grade replacements with these easy-to-install, of reworking other and filing, honing, time-consuming No springs. for manufactured carefully action springs are parts. These precision with only minor disassembly. easy fitting to your revolver SPECS: NEW V trigger pull, lighten cocking easier, - Reduced power springs make lb. hammer 14 power, Kits include reduced accuracy. and improve or 40 oz. light 30 oz. easier cocking, and a choice of spring for positive spring for base pin latch trigger spring, plus extra-power cylinder latching. SPECS: hammer lock and XR-3 grip frame. models with internal REDUCED POWER REVOLVER SPRINGS REVOLVER POWER REDUCED springs a good long time, but we almost long time, but we almost springs a good by accident! this catalog of left them out just in we caught our “oops” Fortunately, They’l give your are. they time, and here New Vaquero - - ab 6.09 16.39 16.39 47.99 14.19 18.09 $ 6.19 $ 4.89 23.99 23.99 23.99 $ 10.19 $ 13.59 $ 23.99 ​ ​ �����

����� ​ ​ �������

​

ab ​

�������������� ���������������� ​9F4L33 , - - - ® ​9F28F31 ​9F6B97 “Set” is normal in all springs, and is the “held-compression” all springs take after being put after all springs take “Set” is normal in all springs, and is the “held-compression”

������������������������� Trigger Job Trigger ������������������������� ������������������������� ab ​9F9I69 , Black . Sold (1) each. ® ® ​9F10G06 The Final Step For A Great Great For A Step Final The ​9F9E85 ​9F9E85 ​9F9M85 ab Single Six

® ��������������������������������������������������� ����������������������������������������������������� ���� ������������������������������������������������� ����������������������������������������������������� �������������������������������������������������������� �������� ������������������������������������������������� S&W WOLFF , Super Blackhawk Hunter ® SAA WOLFF actual measured tests, Brownells Pro-Springs™ took 4 to 10 times less set after equal time under compression than equal time under compression set after took 4 to 10 times less Pro-Springs™ tests, Brownells actual measured , Bisley, and Vaquero and , Bisley, 800-741-0015 ® fits Colt Cowboy and Single Cowboy Action fits Colt Colt/EMF Uberti Flat Shooters Spring Pak, Uberti Flat 9F14K77 Colt Wire Shooters Spring Pak, Wire Shooters Colt Uberti Wire Shooters Spring Pak, 9F14B77 Pak, Shooters Spring Flat Colt/EMF 9F14Q77 9F14H77 Colt/Uberti Wire Sear Sprg, Wire Colt/Uberti Colt/EMF/Uberti Flat Sear Spring, Flat Colt/EMF/Uberti 9F4E35 9F3B00 Extra Power Base Pin Spring, Ruger, 1667 Rebound Spring Kit, 1667 Rebound Spring Kit, 1664 Rebound Pak, 11 lb. Refill Pak, 12 lb. Refill Pak, 13 lb. Refill Colt/EMF Mainspring, Colt/EMF Uberti Mainspring,

ab ruined by an inferior spring. ruined by an inferior XTRA POWER BASE PIN SPRING - Re EXTRA POWER

® Spring steel. Fits Ruger

Spring steel. fits Colt Cowboy and Single Action Army, and Single Action Army, Cowboy fits Colt Spring steel. Colt/EMF fits Colt Cowboy, Single Cowboy, Spring fits Colt Flat Spring steel. Colt/EMF/Uberti A NOTE ON SPRING “SET” - A NOTE ON SPRING , Super Blackhawk ® Five weights of reduced power springs allow precise tuning of tuning of power springs allow precise reduced Five weights of

SAA COWBOY ACTION SPRINGS ACTION COWBOY SAA Unique Design Smooths Action, Reduces Trigger Pull Trigger Reduces Action, Smooths Design Unique under compression for a length of time. What is critical about “set” is that all springs do not take it equally, or stabilize at a predetermined a predetermined at or stabilize it equally, not take all springs do is critical about “set” is that time. What a length of for under compression “set”. In ­ amount of “set” until we stopped testing them. set. The other springs continued to take took no more did other springs tested. And once stabilized, how them out, measure them in a vise overnight, and when you take the springs you want to test; lock it to yourself . . . measure Prove this “shortening” will have - time. Consider the effect much length has been lost. (Do the test on the same springs a second - or third the gun functioning of the safe even smoothness and action pull, original length. Trigger spring’s based on the was action job that an can be ­ REDUCED POWER REBOUND SPRING REBOUND POWER REDUCED #969-323-290AV #969-323-250AV #969-323-260AV #969-322-270AV #969-322-940AV #969-322-900AV #969-000-139AV trigger pulls in all Smith & Wessson revolvers. Kit 1667 contains 1 revolvers. trigger pulls in all Smith & Wessson 1664 contains 50 springs, 10 lb. springs. Kit and 15 14, each: 11, 12, 13, a single weight. Paks include 10 springs of each weight. Refill of #969-000-033AV 969-166-420AV #969-166-400AV #969-166-410AV #969-166-600AV #969-322-800AV #969-322-850AV fits private-label, SAA clones made by SAA clones Uberti fits private-label, Hartford. EMF Army, minor fitting. Uberti. May require hawk SPECS: SPECS: places factory spring for positive cylinder pin positive for places factory spring the possibil Extra power helps prevent latching. the cylinder pin becoming unlocked. ity of RUGER EMF Hartford. May require minor fitting. May require EMF Hartford. SPECS: SPECS: ability, smooth trigger pull, and improve accuracy. Includes re accuracy. smooth trigger pull, and improve ability, sear/bolt spring, extra power base duced power mainspring and sear/ wire features spring. Wire pin spring, stainless steel ejector sear/bolt spring. uses traditional flat bolt spring; flat - Complete set of springs to improve reli improve to springs of set Complete - PAK SAA SHOOTERS SPECS: SPECS: minor fitting. May require and Uberti. EMF Hartford Action Army, - Traditional flat or modern wire springs with springs wire modern or flat Traditional - PRINGS S SEAR/BOLT Gives Each smoothes and lightens trigger pull. power. reduced and reliability. function improved SPECS: SPECS: - Lightens trigger pull trigger - Lightens MAINSPRINGS POWER REDUCED Open center shooting. accurate fast, for and cocking effort gives consistent, uniform, factory spring, of durability retains spring tension.

Maximum Blackhawk Orders: Grips HOGUE MONOGRIPS HOGUE PACHMAYR S&W K/L/N FRAME HANDGUN FRAME & MODEL Contoured Palmswell & Finger Grooves SINGLE ACTION GRIPS “COMPAC” GRIP CROSS REFERENCE CHART

® Improves Recoil Control & Concealability One-piece construction keeps the grip rock- Dress Up Your Colt or Ruger Six Gun With Most grip manufacturers list their grips according to solid in your hand and your hand in the same Exotic Grips Comfortable, one-piece, contoured grip that which frame they fit. If you don’t know which frame size a position, shot after shot for repeatable accuracy. cushions recoil, while offering a superior gripping gun is, check the Model Numbers & Names column in the Nylon and Rubber grips feature a stippled surface Add a little romance to your favorite single surface. Slim, solid back design with rounded edges chart, then which Frame Designation it is under. The list is that prevents hand slip without causing cloth- action with high quality grips cut from exotic helps keep your carry gun concealed and minimiz- general and may not include every model made under a frame ing wear when carried in a holster. Smooth and materials. Precision machined from the finest hard woods and syn- es drag on clothing. Includes molded checkering and gold-color, designation. checkered wood grips available in Goncalo Alves thetics to look better and wear longer than the originals. Because Pachmayr emblem. ab FRAME with light tan color and contrasting dark brown of variations in grip frames, grip panels will require minor fitting. SPECS: Molded rubber, black. SK/C - Fits Smith & Wesson “K” and “L” GUN MFG. DESIG. MODEL NUMBERS & NAMES strips. Pau Ferro is dark brown with darker brown contrasting stripes. SPECS: Available in the following materials: Pau Ferro (PAU), Cocobolo frame round butt revolvers including 9mm/.38 Military & Police and .357 Astra -- Astra .357 Magnum Rubber, Round-To-Square grips give the look and feel of a hand- (CO), Black Micarta (BM). Ruger fits New Model Blackhawk®, New Model Combat Magnum models. SN/C - Fits Smith & Wesson “N” frame round Charter Arms -- Undercover .38; Pathfinder .22 LR; filling square grip on factory, round-grip frames. ab Single Six®, and old, large frame Vaquero®. butt revolvers. Undercoverette .32 S&W Long; SPECS: Nylon molded and reinforced, a hard, tough grip. Rubber molded #692-402-001AV SK/C “K/L” Frame Compac Grip, ​ from recoil-absorbing rubber. Wood made from aged, premium grade STOCK # FITS MATERIAL PRICE 5K24E76 �������������������������������������������������� $ 29.99 Bulldog .38 & .44 Spec. wood, smooth or checkered. Blackhawk® fits new model Blackhawk®, #408-650-100AV Ruger PAU 8K51M39 $ 55.99 Colt D Det. Special-Sq. Butt; Police Pos. Spec.-Sq. REVOLVER/SILHOUETTE/ETC #692-403-002AV SN/C “N” Frame Compac Grip, ​ ® ® new model Single Six , and old, large frame Vaquero . #408-650-101AV Ruger CO 8K59I96 $ 64.99 5K24J76 �������������������������������������������������� 31.99 Butt; Cobra; Agent; Diamondback STOCK # FITS MATERIAL PRICE #408-650-120AV Ruger BM 8K59A96 $ 64.99 Colt E Official Police (Pre’70) Colt I Officl Mod. Match; Police Python; 408-502-010AV Colt Python Rubber 8K17P33 $ 21.56 #408-651-100AV Colt PAU 8K51B39 $ 55.99 Trooper (Pre ’70) 408-502-015AV Dan Wesson Small Rubber 8K17L33 $ 21.56 #408-652-101AV Ruger Bisley CO 8K59M96 $ 64.99 Colt J Metropolitan Mk III; Lawman Mk III; 408-502-100AV Ruger® GP 100®/ Rubber 8K17J33 $ 21.56 PACHMAYR Official Police Mk III; Trooper Mk III Super Redhawk® “GRIPPER” HANDGUN GRIPS Colt V Trooper Mk IV, Mk V, Anaconda King ® ® 8K17F33 408-502-102AV Ruger Redhawk Rubber $ 21.56 Cobra, Peace-maker (D/A) ® 8K17H33 Famous Quality & Super Fit 408-502-104AV Ruger Blackhawk Rubber $ 21.56 N.C. ORDNANCE REVOLVER GRIPS Colt -- 1917 Army ® ® 408-502-106AV Ruger Security Six Rubber 8K17H33 $ 21.56 The combination you’ve been looking for. Posi- Colt -- Single Action Army, 1860 Army; Mirror-Image Reproductions Of tive, no-slip grip provided by Pachmayr’s famous grip Series 151 & higher New Frontier S/A ® ® Hard-To-Find Grip Panels material, plus . . . the excellent accuracy advantage of 408-502-101AV Ruger SP101 Rubber 8K17C33 $ 21.56 Dan Wesson Small 8-2 .32 Spec. Service; 14-2 .357 Mag. ® contoured finger grooves for consistent hand place- 408-000-189AV Ruger Super Rubber 8K17F33 $ 21.56 Affordable, exotic grips for single ment. Won’t chip, crack or break. ab Service; 9-2 .38 Spec. Target; 15-2 .357 Blackhawk® w/ action revolvers are molded from SPECS: Molded, black, neoprene rubber. Mag. Target square triggerguard polyurethane resin and finished by Dan Wesson Large M40, 741, 744 (.357 Max, .41 & .44 Mag) hand for a precise fit. Molding pro- STOCK # FITS MODEL 408-501-001AV S&W K & L Square Nylon 8K17K33 $ 21.56 Ruger 151 .38; .357 Service Six; SDA 32/34/84; cess uses the highest-quality molds cast from mint-condition origi- #692-600-001AV S&W “J” frame w/round butt SJ-G 408-502-001AV S&W K & L Square Rubber 8K17N33 $ 21.56 GF 34/84, Blued & Stnls; .357 Security Six, nal factory grips to ensure no unsightly air bubbles in the finished #692-600-002AV S&W “J” frame w/square butt SJ-GS 408-502-002AV S&W K & L Round Rubber 8K17P33 $ 21.56 product. Grips look and feel like the hard-wearing stag antlers, jigged RDA & GA; 32/34/36, Blued & Stainless; 9mm; .38; .357 Speed Six, #692-601-001AV S&W “K/L” frame w/square butt SK-G 408-000-032AV S&W K & L Round- Rubber 8K17E33 $ 21.56 bone, or ivory used to customize original Old West sixguns. ab SS&GS; 32/34/82, Blued & Stainless #692-601-011AV S&W “K/L” frame w/square butt open SK-GP To-Square SPECS: Molded polyurethane resin, in simulated Stag, Ivory, or Jigged Ruger -- GP-100 back, fits smaller hands 408-502-003AV S&W J Round Rubber 8K17E33 $ 21.56 Bone (JB). Minor fitting may be required. Ruger Vaquero also fits Black- Ruger -- Redhawk hawk and Single Six. Ruger Old Model fits old model three-screw Black- #692-602-001AV S&W “K” frame w/round butt SK-GR 408-502-004AV S&W N Square Rubber 8K17M33 $ 21.56 Ruger -- Super Blackhawk (except XR-3 Frame) hawk frames. #692-603-003AV S&W “N” frame w/square butt SN-G 408-000-033AV S&W N Round-To- Rubber 8K17J33 $ 21.56 Ruger XR-3 New Mod. Blackhawk Super Single Six; #100-005-911AV High Standard Double Nine, Stag, ​ #692-605-005AV Ruger® Security® and Service Six® w/ RS6-G Square 8B35I71 ���������������������������������������������������$ 43.99 RED Old Army square butt #151 or higher Smith & Wesson J 30: .322 Hand Ejector; 31: .32 Regulation 408-502-005AV S&W N Round Rubber 8K17J33 $ 21.56 #100-005-907AV Remington 1858, Ivory/Smooth, ​ #692-606-006AV Colt D frame all w/short square butt CD-G 408-503-004AV S&W N Square Goncalo Alves 8K64M24 $ 69.99 8B24I99 ��������������������������������������������������� 35.99 Police; 32: Terrier Double Action; #692-607-007AV Colt I frame w/square butt CI-G 33: .38 Regulation Police; 34: ’53, 22/32 Kit gun, Round Butt; 34: ’53, 408-504-001AV S&W K & L Square Smooth Pau Ferro 8K64M24 $ 69.99 #100-005-011AV Ruger Super Blackhawk, Stag, ​ 8B35Q71 ������������������������������������������������� 49.99 #692-610-010AV Charter Arms Bulldog CHA-G 22/32 Target; 36: .38 Chiefs Spec. Rd. Butt; 36: .38 Chiefs Spec. Sq. 408-504-005AV S&W N Round Smooth Pau Ferro 8K64Q24 $ 69.99 Butt; 37: .38 Chiefs Special Airweight Round Butt; 37: .38 Chiefs #100-005-015AV Ruger Vaquero, Ivory, 8B23G62​ ������� 35.99 — Advise # — Gripper Grip, 5K24N76 �������������������������������� $ 29.99 408-506-001AV S&W K & L Square Checkered Pau Ferro 8K84E33 $ 90.99 Special Airweight Square butt; 38: Bodyguard Airweight; 43: ’5, #100-005-906AV Ruger Vaquero, Stag, 8B35D71​ ��������� 49.99 408-506-004AV S&W N Square Checkered Pau Ferro 8K84I33 $ 90.99 CONTENDER FOREND - Black, Pachmayr rubber, forend replaces 22/32 Kit gun Airweight, Square butt; 49, 649: Bodyguard (steel 408-506-005AV S&W N Round Checkered Pau Ferro 8K84I33 $ 90.99 #100-005-012AV Ruger Bisley, JB, 8B35F71​ ������������������� 49.99 the wood forend to match your new Contender grip. frame); 51: ’0, 22/32 Kit Gun, .22 WMRF, Round butt; 51, 651: ’0,22/32 #100-005-905AV Ruger Old Model, JB, 8B35B71​ ��������� 49.99 SPECS: Molded, black, neoprene rubber. Fits 10" and 14" Contenders with Kit Gun, .22 WMRF, Sq. butt; 60: .38 Chiefs Special, Stnls, Round butt; GRIPS 408-502-066AV Taurus Medium Rubber 8K17Q33 $ 21.56 408-502-067AV Taurus Small Rubber 8K17F33 $ 21.56 #100-006-133AV Ruger Old Model, Stag, 8B35D71​ ����� 49.99 round barrels. 60: .38 Chiefs Special, Stnls, Square butt; 63: 22/32 Kit gun, Stnls. 408-000-053AV Taurus Tracker Rubber 8K17N33 $ 21.56 #100-005-014AV Uberti Model P, Ivory, 8B25F00​ ��������� 35.99 #692-451-001AV TCF-1 Contender Forend, Only, ​ 5K54J42 ������������������������������������������������������ $ 65.99 Smith & Wesson K 10: .38 M&P, Round butt; 10: .38 M&P, COLT WALNUT GRIPS - Plain, uncheck- Square butt; 12: .38 M&P Airweight, ered reproduction grips of genuine U.S. Round butt; 12: .38 M&PAirweight, Square butt; 13: .357 M&P, Round black walnut turn an old, classic Colt butt; 13: .357 M&P, Square butt; 14: K38 Masterpiece, D/A & S/A; 15: Model 1917 double action revolver into K38 Combat Masterpiece; 16: K32 Masterpiece; 17: K22 Masterpiece; a prized collector’s item. Replicates the PACHMAYR 18: K22 Combat Masterpiece; 19: .357 Combat Mag. Rd. butt; 19: .357 BANG, INC. S&W simple, clean, elegant lines of the original Combat Mag. Sq. butt; 48: K22-MRF Masterpiece; 53: .22 Magnum World War I era U.S. Army service revolver. “PROFESSIONAL” GRIPS (.22 Jet) D/A; 64, 65, 66: .38/.357 M&P, Combat Masterpiece, MICULEK COMPETITION GRIPS Beautifully finished and sealed with two Open Back Strap For Smaller Hands Stainless, Rd. butt; 64, 65, 66: .38/.357 M&P, Combat Mag. Stainless, coats of linseed oil. Comes with brass escutcheon, nut, and blued Sq. butt Excellent For Concealed Carry, screw, like the original grips. ab Same superb Pachmayr feel and recoil ab- Smith & Wesson L 547, 581, 586, 681, 686 Disting. Combat Pin Shooting & Hunting Revolvers SPECS: Black walnut, linseed oil finish. Fits Smith & Wesson Model 1917 and M1909. sorption but with back strap open for those with Mag. #100-005-908AV Colt M-1917 Grips, 8B67H86​ ���������������� $ 95.99 smaller hands, shorter fingers. Designed in coop- Smooth, narrow design by the “fastest revolver Smith & Wesson N 20: .38/.44 Heavy Duty; 21: ’0, .44 Mil. D/A; shooter alive” gives competition and speed shoot- eration with law enforcement agencies. Check- ers a fast draw and maximum recoil control. One- ered, non-slip black rubber with gold Pachmayr emblem. ab 23: .38/.44 Outdoorsman; 24: ’0 piece construction features an open backstrap for SPECS: Molded, black, neoprene rubber. GP for square butt, has finger Target .44 D/A; 25: ’0 Target .45 D/A; 27: .357 Mag. D/A; 28: Highway a comfortable grip and excellent trigger reach; grooves as on Gripper series. CP for round butt, is Compact style with Patrolman; 29: .44 Mag. D/A; 57: .41 Mag. D/A; 58: .41 Mag., M&P; provides a solid fit to the frame. Minimal size helps no finger grooves. 629: .44 Mag. Stnls; All w/round butt prevent “printing”. Non-checkered so clothing STK# SB STK# RB FITS PRICE STOCK # FITS MODEL PRICE Thompson -- Contender - Grip (Below #195,000); slides over it easily. Made of attractive Pau Ferro. #100-000-219AV #100-000-221AV K/L frame $ 90.99 #692-602-400AV Colt “I” Frame CI-GP 5K25M67 $ 29.99 Center Contender-Forend, 14" Round Barrels SPECS: Pau Ferro. Fits square (SB) or round (RB) butt Taurus -- Model 73 & 85 S&W K, L, and N frame revolvers. #100-000-220AV #100-000-222AV N frame $ 90.99 #692-602-011AV S&W “K/L” w/Round Butt SK-CP 5K25Q62 $ 31.99

GUARANTEED. FOREVER.®

PAGE 246 SINCE 1939 Office/Tech: 641-623-5401 PACHMAYR 5 STAR FIREARMS PACHMAYR SMALL-FRAME SAFARILAND REVOLVER/SILHOUETTE/ETC “PRESENTATION” GRIPS REVOLVER SPEEDLOADERS REVOLVER .38 SPECIAL/.357 MAGNUM COMP II SPEEDLOADER Non-Slip Grips For All Conditions For Fast Reloads – Keep Up With The Semi- SPEEDLOADER Rapid Reloading For Auto Shooters Competition & Law Enforcement Neoprene rubber absorbs recoil, provides ab- All-Metal Construction, Smooth & solute, no-slip grip, wet or dry. Molded-in check- Dramatically cuts reload time - ideal for range Fast, reliable speedloader for competition, ering makes grip even more secure. Extra thick- or competition. Lightweight yet very rugged: machined billet alu- Positive Mechanism - No Rattles law enforcement and sporting use. Holds six rounds ready for in- ness and/or length, plus filler material in critical Compact shown minum construction with stainless steel internal components and These speedloaders are built the stant, all-at-once loading into the cylinder. Single “push” motion areas. All have speed loader clearance. ab precision-ground bearings ensure smooth, easy operation. Lets way competition shooters and re- releases rounds, no twisting. Just hold the outer ring, start the bullet SPECS: Molded, black, neoprene rubber. /S = small. /L = large. /C = you release rounds into the chambers with a quick, simple counter- volver aficionados want them: robust, reliable, and compact. Each noses into the cylinder and push down. ab 1 1 compact round butt. /CS = compact square butt. TCF-1 is the forend clockwise turn. ab Pachmayr loader is CNC-machined from a solid block of aluminum SPECS: High-impact, black plastic. 1 /2" (3.8cm) dia., 1 /2" (3.8cm) high. Wt., 1 for 10" and 14", round barrel Contenders. Blackhawk® fits New Model SPECS: Aluminum, polished finish. 1.3" (3.3cm) tall. Weight and diameter to a compact polygonal shape, rather than the typical cylindrical /2 oz. (14 g). For .38 Spl./.357 Mag.only. Blackhawk®, New Model Single Six®, and old, large frame Vaquero®. varies. Taurus Judge model requires cartridge rims to be larger than .508". contour, so it takes up the smallest amount of space possible in your STOCK # FITS STOCK # FITS MODEL PRICE belt pouch. A rubber O-ring keeps each cartridge firmly in place to #797-200-002AV S&W “K”, Dan Wesson, Taurus 66, 669, 689 STOCK # FITS MODEL PRICE prevent unwanted rattling. Cartridges are released from the loader #692-150-001AV Colt “D” frame CD/C 5K26J57 $ 35.99 ® ® #100-012-386AV S&W J-Frame .38 J1-357/38 7C18N66 $ 20.99 into the cylinder with a simple twist of the large, deeply knurled #797-200-008AV S&W “L”, Ruger GP-100 #692-150-002AV Colt “D” frame CD/S 5K23A59 $ 28.99 Spec/.357 Mag knob. Durable, brightly colored anodized finish. Fits 5-shot Smith #797-200-004AV Ruger Security-Six®/Speed-Six®/Service-Six® #692-300-001AV Blackhawk RB 5K24P68 $ 25.99 #100-008-505AV S&W 327/627 8 N-357/38 7C23P33 $ 26.99 & Wesson J-Frame revolvers, as well as Ruger LCR, SP-101, Charter #797-200-003AV Colt Python #692-000-004AV S&W “J” frame SJ/C 5K24I76 $ 30.99 #100-008-504AV S&W 500 500-05X 7C23G33 $ 26.99 Arms 5-shots, Taurus 85/605/651/851, and Rossi 68. ab — Advise # — Comp II Speedloader, 7G9C87 ������������������ $ 11.29 #692-401-001AV S&W “J” frame SJ/CS 5K28K34 $ 34.99 #100-009-987AV S&W Governor .410 6GV-410 7C18F32 $ 24.99 #692-000-042AV J-Frame Speed Loader, 5 Rds, ​ #692-402-003AV S&W “K/L” frame SK/L 5K24M03 $ 31.99 #100-008-508AV Taurus Judge 5J-410/45 7C18M66 $ 20.99 5K15N06 �����������������������������������������������������$ 16.39 #692-451-001AV Contender Forend TCF-1 5K54J42 $ 65.99 SAFARILAND SAFARILAND SPEEDLOADER LOADING BLOCKS SMITH & WESSON COMP III SPEEDLOADER Charge Your Speedloaders ORIGINAL FACTORY REVOLVER GRIPS HKS SPEEDLOADER For The Competitor; Spring- Even Faster Restore Your Smith To Its Loads 5 Or 6 Cartridges Instantly Loaded For Fastest Cylinder Filling Positions wadcutter, semi-wadcutter and round Original, Out-of-the-Box For Super Fast Reloads The latest stage of speedloader Appearance nose .38/.357 ammo for Compact, lightweight carrier provides an ex- development. Extra length so it’s fast loading into all popu- cellent combination of reloading speed, secure easy to hang onto. No-twist, no-turn, There's a big variety of after- lar brands of speedloaders. carry and dependability. Cartridges are held se- spring-loaded design launches rounds into cylinder the instant the market grips for revolvers - many Leave the filled speedloaders in place for easy carrying with the re- curely until you’re ready, then release with just a twist of the knurled loader touches it. ab on display on this and the sur- 1 movable handle. 2 models; both hold 14 speedloaders, 84 rounds knob. Simple to load: turn the knob to the load position, set rounds in SPECS: High-impact, black plastic. 1 /2" (3.8cm) diameter, 3" (7.6cm) long. Round J- rounding pages of the Big Book. total. ab Frame place, and twist the knob to latch. Metal cam points move into place .38/.357. 002 fits - D/Wesson .38/.357, “K” Frame, Taurus 66, 669, 689. But sometimes you just want to SPECS: J-KTR for S&W “K” frame, Ruger “Six”, Colt Trooper Mk III, Mk V over the cartridge rims. To load the gun, guide the bullet noses into 008 fits - Ruger GP 100, “L” Frame. replicate the look and feel of and King Cobra. J-LP for S&W “L”, Ruger GP-100, Colt Python OMM & OM the cylinder, twist the knob, and ammo instantly drops into place. ab #797-350-002AV 002 Comp III Speedloader, 7G14K84​ �� � $ 16.19 1 1 1 your favorite revolver's original Trooper. Both 13 /4" (33.6cm) L x 3 /2" (8.9cm) W x /2" (1.3cm) thick. Black 1 SPECS: High-impact, black plastic body. Knurled aluminum knob. Alumi- #797-351-008AV 008 Comp III Speedloader, 7G14F84​ �� � 16.99 polypropylene. 6 /4 oz. (177.2g). factory grips. What better way 7 5 3 num latch. 1 /16" (3.6cm) high. Diameter varies 1 /8" (4.1cm) to 1 /8" (3.5cm). #797-301-138AV J-KTR Loading Block, 7G17E18​ �������������$ 19.99 than with replacement grips 1 Weighs /4 oz. (7 g) empty. straight from Smith & Wesson? #797-301-238AV J-LP Loading Block, 7G17G18​ ��������������� 18.59 These grips are constructed of STOCK # FITS MODEL Dymondwood, S&W's propri- Squared #392-100-010AV .38/.357 S&W 10, 12, 13, 14, 15, 19, 64, 65, 66, 10-A SAFARILAND K/L-Frame etary wood laminate - don't 67 & Dan Wesson 14 & 15 worry, it's real wood, just stron- 333 SPEEDLOADER CARRIER ger - with grain and coloration that appeals to those who prefer the #392-000-004AV H&R (9 shot), Taurus 94 22HR CALIFORNIA COMP WORKS #392-100-027AV .38/.357 S&W 27, 28 27-A warm glow of wood contrasted against blued (or stainless) steel. Puts 18 Rounds In Easy Reach GRIPS Crisply checkered side panels, and a silver metal S&W medallion at #392-100-036AV .38/.357 S&W 36, 37, 38, 40, 49, 60 (5 shot) 36-A “SHOOT A MOON’ CLIP HOLDERS the top. Smith to its original appearance on the day you brought it Ruger® SP101® Made from Safari-Laminate™. Holds three, Safariland Comp Series speed- Carry Additional Clips For Competition & Hunting home from the store! ab #392-100-053AV .38/.357 Colt MK III, Ruger Sec. Six, Speed Six MK-3A #940-001-071AV J-Frame Round Dymondwood loaders open and ready for quick reloads. #392-100-067AV .38/.357 Colt Python, Officers’ Model Match PY-A Spring steel clip provides quick-to-grasp, instant Service Grip, 4Z30F44​ ������������������������ $ 38.99 External clips provide extra stability and access to loaded moon clips for rapid reloads. Steel ® security. “K” frame carrier accepts Comp #940-001-072AV J-Frame Square Dymondwood #392-100-586AV .38/.357 S&W “L” Frame, Ruger GP-10 586-A lip holds carrier secure to belt; won’t slide or pull off. I, II, and III speedloaders. “L” frame carrier Service Grip, 4Z32E13​ ������������������������ 39.99 #392-000-001AV .44 Spec. S&W 696, Taurus, Rossi (5-shot) CA-44 Nylon cartridge guide positions rounds for correct accepts Comp I and II speedloaders only. alignment. 2 per package. Designed to work spe- #940-001-073AV K/L-Frame Round Dymondwood #392-100-029AV .44 Spec/.44 Mag. S&W 29, R’hawk, DW-44 29-M 3 SPECS: Plain Black (BLK) only. Fits belts up to 1 /4" wide. Service Grip, 4Z29Q36​ ���������������������� 32.99 #392-100-587AV .357 Mag. S&W 686 (7-Shot) 587-A cifically with six-shot .45 ACP revolvers but can be #797-333-001AV “K” Frame Speedloader Carrier, ​ modified to work with 9mm, .357 and 10mm six-shot revolvers. ab #940-001-074AV K/L-Frame Square Dymondwood — Advise # — HKS Speedloader, 3K8H23 ��������������������������� $ 9.69 7G29Q62 �����������������������������������������������������$ 36.99 SPECS: Spring steel, nickel plated. Nylon guide. .45 ACP clips. Sold in pak of 2. Service Grip, 4Z30K91​ ������������������������ 37.99 #797-333-002AV “L” Frame Speedloader Carrier, ​ #151-111-000AV Shoot A Moon Clip Holders, 1E14N98 �� � $ 19.29 #940-001-075AV K/L-Frame Square Checkered 7G31L98 ������������������������������������������������������ 37.99 Target Grips, 4Z63C96​ ���������������������� 75.99

CALIFORNIA COMPETITION WORKS SAFARILAND SAFARILAND push and the speedloader automatically releases the cartridges. SPEEDLOADER HOLDER “SHOOT A MOON” CLIP SPEEDLOADERS COMP I SPEEDLOADER Won’t release unintentionally even if dropped on either end. ab 1 1 HOLDER SPECS: High-impact plastic, black. 1 /2" (3.8cm) dia., 1 /4" (3.2cm) high. Handy Belt Clip Speedloader Carrier Fast, Sure Reloading For Law Enforcement, 1 Wt. /2 oz. (14 g). Get Rapid Reloads With Moon Clips CCW & Competition Open design for minimum bulk; holds tightly. STOCK # FITS No snaps or covers. Vinyl padded inside. Holds Sa- Aluminum post and spring steel clip holds fariland or comparable HKS models. ab Small knob offers maximum concealment. #797-200-007AV S&W “J”, .38 Spl., .357 Mag. loaded 8-shot moon clips correctly for easy ac- SPECS: Spring steel, black epoxy coated. CD-2 holds 5/6 shot medium Twist lock holds rounds secure till you drop them ® cess. Slips over belt for quick on and off. ab into the cylinder. Very fast reloads; start the car- #797-200-005AV S&W, Ruger Redhawk , Colt Anaconda, .44 Mag. and large frame loaders. SPECS: Aluminum guide, spring steel clip. tridges into the cylinder, give a quick downward — Advise # — Comp I Speedloader, 7G10J04 ����������������� $ 11.69 #797-100-002AV CD-2 Speedloader Holder, 7G9F16​ �����$ 10.79 #151-000-023AV 8 Shot Moon Clip Holder, 1E12I56​ ������ $ 12.89

order on the web

Orders: 800-741-0015 brownells.com PAGE 247 BECKHAM DESIGN S&W REVOLVER TK CUSTOM MOON CLIP STRIPPER RIMZ SPEEDLOADER SMITH & WESSON MOONCLIPS SWIVEL STUD INSTALLATION TOOL Competition Grade Moonclips For Fast, Long Lasting, Polymer Handy Tool Makes Fumble-Free Reloads Strip & Hold Every Round Moon Clips Load & Unload Installing Swivel Studs From Your Revolver With Just Your Fingertips Long-lasting moonclips keep revolver Easy & Accurate cartridges together and properly aligned Long steel tube holds all Flexible, molded-polymer, moon clips provide Steel shank centers the swivel stud directly in the center of the a means of ejecting rimless cartridges from early and late model for fast, positive reloads in Smith & Wesson the empty cases you’re stripping from your revolver’s moon clip - revolvers. Made to uniform tolerances from tool to properly align the stud in the hole in the stock. Tool prevents even 8-rounds of empty .357 mag. Durable, Brownells screwdriver Smith & Wesson revolvers. High-strength, hydrocarbon polymer stock scratches that happen if you crank it in with a punch through won’t rust, break or deform; fires 300-400+ rounds before requir- rigid steel for consistent fit and function. handle makes the tool easy and comfortable to use. Extended- Some models intended specifically for use the swivel hole. Use sling swivel drills for a properly sized hole. Plastic length 10 mm holds 9mm, .38 Spl., .357 Mag. and 10mm; also avail- ing replacement. Loads easily by hand without the need for special handle gives you a large gripping surface to keep your hand steady tools or costly equipment. Keeps empties together, too. RIMZ 625 with Starline Brass. Available in silver stainless steel (SS) or blued able in standard length .45 ACP. ab carbon steel. J-Frames sold in 5-paks, other sizes in 10-paks. ab while driving the stud. ab 7 SPECS: Hardened steel, blued. Plastic handle. 10mm - 10 /8" (27.6cm) fits S&W M625-4 and newer revolvers in .45 ACP. RIMZ 25 fits S&W SPECS: Steel shank, plastic handle. 5.8" (14.8cm) long. Fits common OAL. .45 ACP - 7" (17.8cm) OAL. M1917, M25 and M625-3 and earlier in .45 ACP. ab STOCK # FITS THICKNESS FINISH QTY PRICE swivel studs. 7 SPECS: Hydrocarbon polymer, black. 1 /16" (3.7cm) diameter. Sold in 5-Paks. #352-197-100AV Extended 10 mm Moon Clip Stripper, ​ J-FRAME #080-000-253AV Swivel Stud Installation Tool, ​ 2E16Q99 ����������������������������������������������������� $ 17.99 #100-001-580AV RIMZ 625 Speedloader, 5-pak, 2A5K19​ ��� $ 7.39 REVOLVER/SILHOUETTE/ETC #100-013-653AV 5-shot 38/357 Mag .025" SS 5 6A30M90 $ 38.99 8K15H99 �����������������������������������������������������$ 16.99 #100-001-684AV RIMZ 25 Speedloader, 5-pak, 2A4E94​ ��� 6.69 #352-197-000AV .45 ACP Moon Clip Stripper, 2E18J19​ ��� 19.99 #100-013-655AV 5-Shot 38/357 Mag .020" SS 5 6A29M65 $ 36.99 K FRAME #100-013-650AV 6-shot .38/357 Mag .025" SS 10 6A58G69 $ 64.99 KLEINENDORST #100-013-656AV 6-shot 38/357 Mag L- .025" SS 10 6A58A69 $ 66.99 Frame w/Starline Brass SLING SWIVEL DRILL JIG L FRAME SMITH & WESSON For Precise Alignment & Drilling #100-013-661AV 6-Shot 9mm//40 S&W .035" Blued 10 6A32Q55 $ 39.99 Of Stock Swivel Stud Holes SMITH & WESSON MOON CLIPS MOON CLIPS FOR 8-SHOT REVOLVERS N FRAME 8-Round .40 Caliber 6-Round The Correct Clips for the Big #100-013-663AV 8-Shot 38/357 Mag .020" SS 10 6A59M35 $ 74.99 Precision adjustable jig Competition Wheelguns #100-013-664AV 8-shot 38 Super/9mm .035" Blue 10 6A34J64 $ 45.99 maintains the proper drill bit alignment to ensure the #100-013-665AV 6-Shot 45 ACP .040" SS 10 6A67E72 $ 76.99 These are factory full-moon correct location of the rear #100-013-666AV 8-shot 38/357 Mag w/ .025" SS 10 6A58N69 $ 66.99 clips for 8-round Smith & Wesson swivel stud hole. Fits any size Custom Shop revolvers. They're Starline Brass stock and automatically self- made out of resilient spring steel #100-013-667AV 8-shot 38/357 Mag .025" SS 10 6A62M06 $ 74.99 centers for perfect stud hole alignment. Felt lining prevents

SPEEDLOADERS with a blued finish. Two models to choose from: one for M627/ 6A17M30 Gives Rapid Reloads For Smith & Wesson Revolvers #100-002-058AV Governor .040" Blue 10 $ 21.99 5 M327 .357 Magnum boomers also handles .38 Special ammo; .025" marring finished stocks. Includes /32" diameter carbon steel drill bit Fast and easy-to-use, provides your S&W revolver with quick, thick, with a .608" clearance hole for the ratchet. Clip for the M929 contains a special relief tip to help prevent wood splintering and sure reloads and keeps spent brass together. Available for a variety of 9mm/.38 Super cylinder is .035" thick, with a .641" clearance hole break-out when drilling. Adjustable drill-depth indicator prevents different S&W revolvers in .40 caliber, .357, and .38 Super. .40 Caliber for the ratchet. Both are sold in packs of 3. ab drilling too deep and ruining the hole. For use with hand-held drill. Moon Clips are available for the S&W Model 646 in two sizes to allow Perfect for the high volume shop or beginner just starting out. ab #940-001-083AV M627/M327 .38 Spec/.357 Mag 8-Rd proper headspace depending upon rim thickness; choose style “N” SPECS: Aluminum cylinders, anodized. Steel frame & adjustment bolt, Moon Clips, 3-Pak, 4Z16Q99​ �����������������$ 22.99 for .035" or style “T” for .042" . .357 Caliber Moon Clips are available black, matte finish. Includes fixture, 5⁄32" (3.9mm) dia. drill, and complete for three, .357 S&W revolvers. Order the 686P-7 for the 7-shot 686 #940-001-084AV M929 9mm/.38 Super 8-Rd Moon instructions. Plus or 586 L-Comp; order the 627M-8 for the 8-shot S&W M-27. Clips, 3-Pak, 4Z20B23​ ����������������������������� 25.99 #488-000-006AV Sling Swivel Drill Jig, 8H157N65​ �������� $ 187.99 .38 Super Moon Clips are also available for the 6-shot S&W 686 and the 8-shot 627. ab UNCLE MIKE’S SLING 1 SPECS: Steel, blue. Approximately 1 /2" (3.8cm) diameter. Available in paks of 5 or paks of 10. .357 Cal. requires machining of cylinder, and are de- SWIVEL STUD KIT signed for use with Federal and Remington-Peters brass; others may be OUTDOOR CONNECTION difficult to load. WILSON COMBAT Every Swivel Stud & Part You Need SWIVEL BASE DRILL BIT SET STOCK # MODEL/CALIBER CAP. PRICE Saves money and “scrounge-time” by .45 CALIBER MOON CLIPS putting all the most needed swivel stud For Easy, Clean Swivel Stud Holes 5-PAKS parts at your fingertips. Uncle Mike’s is #084-000-015AV 646T/.40 6 RD 4H23I19 $ 24.99 Brand-New, Clean & Springy - Easy to use, carbon steel drill bits contain a spe- the most popular brand on the market, so cial relief tip to help prevent wood splintering and #084-000-004AV 686P-7/.357 7 RD 4H14N61 $ 15.99 Forget About Saving Worn, Bent- you’ll have what most of your customer’s guns need. ab Up Old Clips! break-out when drilling sling stud holes. Features a #084-000-006AV 627M-8/.357 8 RD 4H14B99 $ 15.99 SPECS: Kit includes: 1 dz. each of 7 individual 10-32, dome-top sling studs; built-in counter-sink for precise inletting of the stud 3 1 3 dz., /4" (19mm) wood screw studs; 1 dz., /2" (12.7mm) wood screw studs; #084-000-087AV 686M/.38 Super 6 RD 4H20D19 $ 21.99 Speeds loading/unloading of spacer and a flush fit every time. Pre-set, drill-depth SLINGS & SWIVELS 2 dz., 10-32 hex nuts; 4 dz., 10-32 dome top nuts; 4 dz. white plastic spac- #084-000-089AV 627M/.38 Super 8 RD 4H19Q99 $ 21.99 S&W 25-2, 625, plus Colt/S&W 1917 indicator prevents drilling too deep and ruining the ers; 4 dz., black plastic spacers; all in bench box. Order refills from chart. 5 3 10-PAKS revolvers. Reusable clip holds six hole. Includes two drill bits, /32" dia. and /16" dia., for rounds in a lightweight, easy-to-load #080-769-000AV Swivel Stud Kit, 8K85M99​ �������������������� $ 89.99 both front and rear stud holes. ab #084-000-016AV 646T/.40 6 RD 4H36N59 $ 38.99 5 3 unit. Keeps all your spent brass together, too. ab #080-769-301AV 12 Wood Screws, 8K8E79​ ���������������������� 9.99 SPECS: Steel, black, finish. Drills - /32" (3.9mm) dia. & /16" (4.6mm) dia. #084-000-005AV 686P-7/.357 7 RD 4H28J89 $ 30.99 1 SPECS: Available in blue or nickel plated (NK). Approx. 1 /2" (3.8cm) dia. #683-000-005AV Swivel Base Drill Bit Set, 3A11Q25​ �������$ 13.99 #084-000-007AV 627M-8/.357 8 RD 4H28K99 $ 31.99 5 clips per pak. REFILLS #084-000-088AV 686M/.38 Super 6 RD 4H43Q99 $ 49.99 #965-069-005AV Blue .45 ACP Moon Clips, 5F6J09​ �������� $ 6.69 STOCK # DESCRIPTION # IN PAK PRICE #084-000-090AV 627M/.38 Super 8 RD 4H39J19 $ 43.99 #965-069-105AV NK .45 ACP Moon Clips, 5F9K99​ ������������ 10.99 1 #080-769-101AV 10-32 x /4" Dome Stud 12 8K13I99 $ 19.99 3 UNCLE MIKE’S SWIVEL DRILLS #080-769-111AV 10-32 x /8" Dome Stud 12 8K12B79 $ 19.99 1 #080-769-131AV 10-32 x /2" Full Thread 12 8K13B99 $ 19.99 Speed Up The Job With This Special Drill 5 #080-769-141AV 10-32 x /8" Dome Stud 12 8K9H99 $ 10.99 Special drill designed by Uncle Mike’s to install 3 #080-769-161AV 10-32 x /4" Dome Stud 12 8K8L99 $ 9.99 their plain and quick detachable swivels with a mini- TK CUSTOM 7 Steel moonclips drop into popular models of Taurus revolvers #080-769-151AV 10-32 x /8" Dome Stud 12 8K8F79 $ 9.99 mum of time and effort. Correct diameter to drill and 1 counterbore swivel stud holes for neat, no-splinter, and ease loading and unloading. Fit 5-shot revolvers only. All moon #080-769-311AV /2" Wood Screw Stud 12 8K14C52 $ 19.99 TAURUS MOON professional installations. clips sold separately. ab #080-769-201AV 10-32 Hex Nuts 12 8K6G99 $ 8.99 3 3 SPECS: #1 drill - 2 /4" (7.0cm) overall length, /16" (4.8mm) bit CLIPS #100-014-286AV .380 Moonclip, 6A30E04​ ���������������������� $ 38.99 #080-769-211AV 10-32 Dome Nuts 12 8K8D99 $ 9.99 1 dia. #2 drill - 2" (5.1cm) overall length, /8" (3.2mm) bit dia. Correct-Size Moon Clips For Your #100-014-287AV 9mm Moonclip, 6A30N90​ �������������������� 38.99 #080-769-501AV White Spacers 50 8K11L79 $ 12.99 #593-255-202AV Uncle Mike’s Swivel Drill Set, ​ Taurus Wheelguns #100-014-288AV .40S&W Moonclip, 6A30N90​ ���������������� 38.99 #080-769-502AV Black Spacers 50 8K8C79 $ 9.99 7K27Q69 ���������������������������������������������������� $ 33.99

GUARANTEED. FOREVER.®

PAGE 248 SINCE 1939 Office/Tech: 641-623-5401