Heavy Duty Truck Technician

BOOK AND LIST 2019-2020

Books*

ISBN: 9781284110586 TRUCK TECHNICIAN BUNDLE: $550.00 Fundamentals of Medium/Heavy Duty Commercial Vehicle Systems Textbook Fundamentals of Medium/Heavy Duty Diesel Engines Textbook Two Year Online Access

Bundle must be purchased prior to the first day of class

SUPPLIES: (app. $385.00)

 Drug Test - $30.00  Leather safety toe work boots, ANSI- Z87 approved safety glasses, clear, no tint - $60.00 to $200.00  Handheld electronic calculator  Miscellaneous supplies (3 ring binder, notebook paper, pens, , highlighters)  3 Uniform Shirts with CWI logo, 3 uniform pants - $225.00 (Long Sleeve $5.00 add per shirt)

FIRST YEAR TOOL LIST: Course Fee $5600.00*

Required* (see footnote)

Toolbox: KRA4107FPBO - Rollaway tool chest. Minimum capacity 15,000 cubic inches. Maximum width 41 inches. Must have matching top box optional.

Pliers: PL400B  7" diagonal cutting  6-1/2" long nose needle nose pliers  8" combinations  Rib lock pliers (channel lock) 9” long BLP10 - 10" vice grips () SRPC105 - External/Internal snap ring pliers fixed tip .038 & .070 tip - 0 & 90 degree

Hammers: BPN16B - 16 oz. Ball peen HD4SG - 4 lb. Short handled hammer HBFE32 - 32 oz Dead blow soft face hammer

Electrical: FLU177 - Fluke 177 Digital Volt Ohm Meter with temperature probe PWC9 - Wire stripper/terminal crimpers pliers

Punches and chisels: PPC710BK  3-piece Cold chisel set  3-piece Pin set  3-piece Taper punch set  Center punch (1/2" x 6") PPB826A- Brass drift (13/16th x 8 inch)

Pry bars: SPBS704AO - Pry bar set (4-pcs striking) PBS704 - 4 piece lady foot / line up bar set

Screwdrivers: SGDX80BR  1 ¼ " stubby -flat blade  3½" screwdriver – flat blade  4" screwdriver- flat blade  6" screwdriver- flat blade  8" screwdriver- flat blade  #1 Phillips screwdriver  #2 Phillips screwdriver  #2 Stubby Phillips screwdriver

Measuring : TPMA12 - 12 ft. retractable measuring tape FB300A - Feeler gauge set 45 degree .0015-.030 in .001 increments FB325A - Feeler gauge set straight .0015-.030 in .001 increments

Miscellaneous tools: UIM225 - Telescoping mirror PHT5 - Magnetic pickup tool CSA8CR - Gasket scraper SP201H - MiniMag (2 AA battery size) EXDL10 - 10-pc left hand extractor set (with drill bits) SGASA204CR - 4-piece pick set DBTR11 - 1/16th thru 3/8th high speed drill bit set YA4275 - Oil filter pliers 4 1/4 to 7 inch

Wrenches: OEX711B - Standard combination set (3/8" through 1”) OEXM710B - Metric combination wrench set (10mm through 19mm) FADH702A  8" adjustable wrench  12" adjustable wrench AW1015DK - set (Allen ) (.028 through 3/8") AWM110DHK - Metric hex key set (2 mm to 12 mm)

Sockets: 144TMPB  1/4 Standard 12-point socket sets-shallow and deep. (3/16” through 9/16”)  1/4 Metric 12-point socket set -shallow and deep. (5mm through 14mm)  1/4 Drive Ratchet  1/4 Drive extension 2 inch and 6 inches F80 - 3/8 Drive ratchet FXK3 – FXK6 – FXK11 - 3/8 extensions (3”, 6” and 11”) 211FY - 3/8 Standard shallow 12-point socket sets (1/4" to 7/8") 211SFSY - 3/8 Standard deep 6-point socket sets (1/4" to 7/8") 212FMY - 3/8 Metric shallow 12-point socket set (8mm to 19mm) 212SFSMY - 3/8 Metric deep 6-point socket set (8mm to 19mm) 207EFTXY - 3/8 Torx sockets -internal (T-27 through T-55) S80A - 1/2 Drive ratchet (standard length) SLL80A - 1/2 Drive ratchet (24” length) SXK5 – SXK11 - 1/2 extensions (5” and 11”) 313SIMA – ½ Standard deep 6 point impact socket set (1/2 to 1-1/4”) 313IMD - 1/2 Standard shallow impact 12-point socket set (3/8” through 1-1/4") 315IMDMYA - 1/2 Metric shallow impact 12-point socket set (10mm to 24mm)

Adapters (Impact): 1206GS  3/8 to 1/2  3/4 to 1/2  1/2 to 3/8  1/2 to 3/4  3/8 to 1/4  1/4 to 3/8

Torque Wrenches: QD3R250A - 1/2 Drive click type ratcheting 250 ft. lb. QD2FR75 – 3/8 Drive flex head click type ratcheting torque wrench 5 to 75 ft. lb.

* Tools and toolbox equivalent in specification, quality, workmanship, economy of operation, and suitability for the purpose intended will be accepted subject to inspection by Instructor & Department Chair

APPROXIMATE FIRST YEAR TOOLS, BOOKS AND SUPPLIES: $ 6535.00

SECOND YEAR RECOMMENDED TOOL LIST:

Recommended not required 1/2" air impact gun 3/8" air impact gun 3/8" air ratchet

3/8" drive metric swivel impact socket set 3/8" drive standard swivel impact socket set

1/2" drive impact extension (6” and 10") 1/2" drive impact universal joint

Hex driver (Allen) socket set metric Hex driver (Allen) socket set standard

Remote starter button Metric tubing wrench set Standard tubing wrench set Caliper (.001 Std & .01 mm) Pressure test gauge 0 to 300 PSI 1/2" drive 36" extension set Cordless screwdriver (w/ extra battery) 3/4" drive standard socket set (1 5/16 to 2") 3/4" drive 3/4” ratchet 3/4" drive extension (3" and 6")

SECOND YEAR COSTS FOR CLASS A CDL & DRUG TEST: (app. $1188.00) DMV DOT PHYS $ 145.00 Drug Test (Employer) $ 30.00 Driving Record Fee $ 5.00 CDL Training Course $ 408.00 for tuition (In-District Idaho Resident) CDL Course Fee $ 600.00 estimate (Truck Maintenance & Fuel)

BOOKS, TOOLS, SUPPLIES, TUITION & CDL TOTALS FOR 2 YEAR PROGRAM

Tuition- In-District Idaho Resident $139/credit Out of District Resident $189/credit + depending Out of State & Foreign $306/credit

1st Year TOTAL COST OF BOOKS, TOOLS, AND FEES FOR 1 YR PROGRAM $6535.00

TUITION COST 2 SEMESTERS (1668 x 2) $3,366.00

COST OF 1st YEAR $ 9901.00

2nd Year ADDITIONAL CDL/DMV COURSE FEE SUMMER SEMESTER $1188.00

TUITION COST 4 SEMESTERS (1668 X 4) $3366.00

COST OF 2nd YEAR $4554.00

TOTAL COST OF 2 YEAR PROGRAM $14,455.00

*Note: Prices are estimates and subject to change.