Builders Tools & Accessories
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
14624 14624 Petrochem Brochure
SALES RENTAL SERVICE CONSULTING ENGINEERING TORKWORX is a leader in providing equipment and manpower to en- sure competent and safe solutions for the controlled tightening and loosening of complex joints. Our quality product and services are delivered to the Oil & Gas, Power Generation, Petro/ Refining and Heavy Engineering industries. TORKWORX is committed to offer our customers a complete single source for all their bolting require- ments, providing the best solutions to handle all complex bolting appli- cations. Through a comprehensive and extensive line of torque and tension products, TORKWORX cus- tomers are assured of the most competent and cost effective solu- tion… Done right the first time. s a le s r e n t a l s e r vi ce c o ns ul t i ng engineering 8319 THORA LANE HANGAR E2 SPRING, TX 77379 888.502.WORX ph 713-481-6220 fax www.torkworx.com extreme bolting solutions that WORX CONNECTING YOUR BUSINESS TO THE BOLTING TECHNOLOGY YOU NEED TORKWORX is a leader in providing equipment and TORKWORX has introduced new generation ERAD manpower to insure competent and safe solutions for electrically powered digitally controlled torque systems the controlled tightening and loosening of complex that increase productivity and reduce downtime ONSITE BOLTING SERVICES Our specialists deliver bolt working joints. Our specialists deliver bolt working solutions by providing the operator with the ability to visually solutions derived using the most ad- derived using the most advanced technology and the confirm torque output as well as record the torque vanced technology and the most effi- highest quality materials along with turnkey bolting data for future reporting. -
5/17/18 Incredible Tool Auction
09/26/21 01:02:55 5/17/18 Incredible Tool Auction Auction Opens: Fri, May 11 4:00pm PT Auction Closes: Thu, May 17 5:30pm PT Lot Title Lot Title 0001 Ariens 2-Stage Snow Blower Cab Cover 0029 Nicholson 4pc. Rasp & Chisel Set 0002 Reese Towpower Heavy Duty Pintle Hook 0030 Dewalt Pressure Washer Professional Spray Gun 0003 Frost King Self Stick Weather Stripping 0031 Ridgid Plastic Pipe Cutter 0004 Cleanstream Wet/Dry Vac Filter 0032 Architectural Galvanized Black US Mailbox - 0005 Architectura US Galvanized Steel Mail Box - Medium Medium 0033 Schlage Light Commercial Keypad Lever Door 0006 Rayovac 6AA Indestructible Spotlight Lock 0007 6pc. Dewalt Screwdriver Set - Phillips & 0034 Kwikset Smartkey Single Cylinder Deadbolt Flathead 0035 Kwikset Obsidian Touchscreen Electronic 0008 Swiss Tech Emergency Hammer & Lufkin Deadbolt Folding Ruler 0036 Kwikset Powerbolt 2 Touchpad Keyless Entry 0009 Hitch Pins & Coupler Locks 0037 Kwikset Smartkey Door Knob Dead Bulb 0010 TowSmart LED Trailer Light Kit Combo Kit 0011 Blazer Magnetic Trailer Towing Light Kit 0038 Baldwin Smartkey Bronze Finish Lever Door Lock 0012 Black & Decker 300A Jump Starter 0039 Kwikset Smartkey Keyed Entry Door Knob 0013 TowSmart LED Trailer Light Kit 0040 Kwikset Smartkey Keyed Entry Door Knob 0014 Tow Smart Ball Mount Trailer Hitch 0041 50W Halogen Track Light 0015 TowSmart 1/2" - 5/8" Locking Hitch Pin & Clevis Pin 0042 Baldwin Prestige Smartkey Handle & Deadbolt Set 0016 Milwaukee & Wiss Scissors 0043 Baldwin Prestige Smartkey Handle & Deadbolt 0017 Set of 4 Light Duty 2" Threaded Stem Casters Set 0018 Set of 4 Light Duty Twin Wheel 2" Castors 0044 Patio Door & Window Insulation Kits & 0019 Set of 4 Light Duty Twin Wheel 2" Castors Weather Seal 0020 Husky 5pc. -
Nummer 41/17 11 Oktober 2017 Nummer 41/17 2 11 Oktober 2017
Nummer 41/17 11 oktober 2017 Nummer 41/17 2 11 oktober 2017 Inleiding Introduction Hoofdblad Patent Bulletin Het Blad de Industriële Eigendom verschijnt The Patent Bulletin appears on the 3rd working op de derde werkdag van een week. Indien day of each week. If the Netherlands Patent Office Octrooicentrum Nederland op deze dag is is closed to the public on the above mentioned gesloten, wordt de verschijningsdag van het blad day, the date of issue of the Bulletin is the first verschoven naar de eerstvolgende werkdag, working day thereafter, on which the Office is waarop Octrooicentrum Nederland is geopend. Het open. Each issue of the Bulletin consists of 14 blad verschijnt alleen in elektronische vorm. Elk headings. nummer van het blad bestaat uit 14 rubrieken. Bijblad Official Journal Verschijnt vier keer per jaar (januari, april, juli, Appears four times a year (January, April, July, oktober) in elektronische vorm via www.rvo.nl/ October) in electronic form on the www.rvo.nl/ octrooien. Het Bijblad bevat officiële mededelingen octrooien. The Official Journal contains en andere wetenswaardigheden waarmee announcements and other things worth knowing Octrooicentrum Nederland en zijn klanten te for the benefit of the Netherlands Patent Office and maken hebben. its customers. Abonnementsprijzen per (kalender)jaar: Subscription rates per calendar year: Hoofdblad en Bijblad: verschijnt gratis Patent Bulletin and Official Journal: free of in elektronische vorm op de website van charge in electronic form on the website of the Octrooicentrum Nederland. -
Carpenters of Japanese Ancestry in Hawaii Hisao Goto Kazuko
Craft History and the Merging of Tool Traditions: Carpenters of Japanese Ancestry in Hawaii Hisao Goto Kazuko Sinoto Alexander Spoehr For centuries the Japanese have made extensive use of wood as the main raw material in the construction of houses and their furnishings, temples, shrines, and fishing boats. As a wood-worker, the carpenter is one of the most ancient of Japanese specialists. He developed a complex set of skills, a formidable body of technical knowledge, and a strong tradition of craftsmanship to be seen and appreciated in the historic wood structures of contemporary Japan.1 The first objective of this study of carpenters of Japanese ancestry in Hawaii is to throw light on how the ancient Japanese craft of carpentry was transplanted from Japan to a new social, cultural, and economic environment in Hawaii through the immigration of Japanese craftsmen and the subsequent training of their successors born in Hawaii. Despite its importance for the understanding of economic growth and develop- ment, the craft history of Hawaii has not received the attention it deserves. The second objective of the study is more anthropological in nature and is an attempt to analyze how two distinct manual tool traditions, Japanese and Western, met and merged in Hawaii to form a new composite tool tradition. This aspect of the study falls in a larger field dealing with the history of technology and of tool traditions in general. Carpentry today, both in Japan and in the United States, relies heavily on power rather than hand tools. Also, carpenters tend to be specialized, and construction is to a major degree a matter of assembling prefabricated parts. -
National Warehouse Retailer-Tools - MODESTO - February 14
10/02/21 04:50:20 National Warehouse Retailer-Tools - MODESTO - February 14 Auction Opens: Fri, Feb 9 11:12am PT Auction Closes: Wed, Feb 14 6:30pm PT Lot Title Lot Title MA7000 De Walt Case MA7032 Stanley Tool MA7001 Dewalt MA7033 tool MA7002 DeWalt MA7034 Graco RAC IV Hand Tight Guard MA7003 DeWalt Multi Tacker MA7035 Knifes MA7004 Stanley Electric Stapler/ Nail Gun MA7036 DeWalt Multi Tacker MA7005 Tool MA7037 Tool MA7006 Tool MA7038 Damaged Items MA7007 DeWalt MA7039 Tool MA7008 Ridgid Diamond Blade MA7040 Self Leveling Cross Line Laser Powers ON MA7009 Avanti Blade MA7041 Tool MA7010 Tool MA7042 Tape Measure MA7011 Tool MA7043 DeWalt MA7012 Tool MA7044 De Walt Measure Tape MA7013 DeWalt Compact Stapler MA7045 DEP Professional Tile Cutter MA7014 Tile Pro Blade MA7046 Ridgid Blade MA7015 Stanley MA7047 Tape Measure MA7016 Avanti Pro Blade MA7048 DeWalt Multi Tacker MA7017 De Walt Glue Gun MA7049 De Walt Multi Stapler MA7018 Bosch Self Leveling Cross Line Laser Powers MA7050 DeWalt Knife On MA7051 DeWalt Knife MA7019 Saw MA7052 Blade MA7020 Rigdig Diamond Blade MA7053 Stanley tape Measure MA7021 Wiss Multi Purpose Wire Cutters MA7054 Blade MA7022 Wiss MA7055 Stanley Tacker/Nailer MA7023 De Walt Knife MA7056 DeWalt Tools MA7024 Tool MA7057 DeWalt MA7025 Tool MA7058 HDX Tool MA7026 Tool MA7059 Tape Measures Damaged MA7027 Miter Saw MA7060 Stanley Glue Gun MA7028 Stanley Electric Stapler/ Nail Gun MA7061 Tool MA7029 DeWalt Multi Tacker MA7062 Stanley Tape Measure MA7030 Tape Measure damaged items MA7063 Tape Measure MA7031 DeWalt Tool -
7FA.05 Gas Turbine to 7FH2B Generator Fr
INSTRUCTION MANUAL IM‐327 For Gas Turbine Tensioned Studs and Nuts Applicable Bolting Connections Fr. 7FA.05 Gas Turbine to 7FH2B Generator Fr. 7FA.05 Gas Turbine to Load Coupling Load Coupling to 7FH2B Generator Applicable GE Ordering Sheet Part Numbers 106T1751P001 106T1751P002 106T1751P003 106T1751P004 106T1751P005 GE Power Generation GENERAL ELECTRIC COMPANY VENDOR SUPPLIED GE NOT TO REVISE. GE REVISION LEVEL IS SHOWN ON THIS APPLIQUE. THIS DOCUMENT IS FILED UNDER THE GE DRAWING NUMBER. THIS DOCUMENT SHALL BE REVISED IN ITS ENTIRETY. ALL SHEETS OF THIS DOCUMENT ARE THE SAME REVISION LEVEL AS INDICATED IN THIS VENDOR SUPPLIED DRAWING APPLIQUE. MLI: ____ OF ____ GE SIGNATURES DATE GE DRAWING NUMBER REV CHECKED: ISSUED: 373A4072 F The Riverhawk Company reserves the right to update this document without dissemination or notice. The latest revision may be obtained by contacting Riverhawk Company or thru www.riverhawk.com. 215 Clinton Road New Hartford, NY 13413 Tel: +1 315 768 4855 Fax: +1 315 768 4941 Email: [email protected] Instruction Manual IM‐327 Table of Contents Section Description Page Number 1.0 Cautions and Safety Warnings 3 2.0 Scope and GE Part Number Cross Reference 5 3.0 Quick Checklist 6 4.0 General Preparations 10 5.0 Hardware Set Preparations 13 6.0 Stud and Nut Assembly 16 7.0 Hydraulic Tensioner Equipment Assembly 19 8.0 Assembly of Tensioner on Stud 22 9.0 Stud Tensioning 27 10.0 Thread Locking 30 11.0 Stud and Nut Removal 30 12.0 Storage Instructions 35 13.0 Frequently Asked Questions 35 14.0 Revision History 38 Appendix EC Declaration of Conformity 39 A1 Appendix 18‐Bolt Tensioning Pattern (GT‐LC) Record Sheet 40 B1 Appendix 16‐Bolt Tensioning Pattern (LC‐GEN) Record Sheet 41 B2 215 Clinton Road GE DRAWING NUMBER REV New Hartford, NY 13413 Tel: +1 315 768 4855 373A4072 F Fax: +1 315 768 4941 Email: [email protected] Page 2 of 41 Instruction Manual IM‐327 1.0 Cautions and Safety Warnings WARNING Improper tool use and the failure to follow the correct procedures are the primary root causes of tool failures and personal injuries. -
Small Replacement Parts Case, Empty A.6144 Old Ballpoint Pen with Head for Classic 0.62
2008 Item No. Page Item No. Page 0.23 00 – 5.01 01 – 1 22 0.61 63 5.09 33 5.10 10 – 0.62 00 – 2 – 23 – 5.11 93 0.63 86 3 24a Blister 0.64 03 – 5.12 32 – 4 25 0.70 52 5.15 83 0.80 00 – 5.16 30 – 26 – 4 0.82 41 5.47 23 29 0.71 00 – 5.49 03 – 30a – 5 0.73 33 5.49 33 30b 0.83 53 – 6 – 5.51 00 – 32 – 0.90 93 7 5.80 03 34 1.34 05 – 9 – 6.11 03 – 36 – 1.77 75 11 6.67 00 37 1.78 04 – 6.71 11 – 38 – 11a 1.88 02 6.87 13 38a 1.90 10 – 7.60 30 – 41 – 13 1.99 00 7.73 50 43 Ecoline 7.71 13 – 43a – 2.21 02 – 14 7.74 33 43b 3.91 40 2.10 12 – 14a – 7.80 03 – 44 – 3.03 39 14c 7.90 35 44a CH-6438 Ibach-Schwyz Switzerland 8.09 04 – 46 – Phone +41 (0)41 81 81 211 4.02 62 – 16 – Fax +41 (0)41 81 81 511 8.21 16 47b 4.43 33 18b www.victorinox.com Promotional P1 [email protected] material A VICTORINOX - MultiTools High in the picturesque Swiss Alps, the fourth generation of the Elsener family continues the tradition of Multi Tools and quality cutlery started by Charles and Victoria Elsener in 1884. In 1891 they obtained the first contract to supply the Swiss Army with a sturdy «Soldier’s Knife». -
MRO 10 Lb. Tying Twine with Dispenser Box 8” Half Round
Contractor Tools 10 lb. Tying Twine with Dispenser Box Putty Knife • 650/1 • 10 lbs. • Includes dispenser box PART NO. DESCRIPTION CTN/MSTR T60004 10 lb. dispenser 1/1 PART NO. DESCRIPTION CTN/MSTR 8” Half Round Bastard File K50015 1-1/4” putty knife 12/144 K50020 1-1/2” putty knife 10/100 • High speed steel plastic molded handle K50017 2” putty knife 10/100 • Carded double blister K50016 3” putty knife 12/144 K50018 4” putty knife 10/50 PART NO. DESCRIPTION CTN/MSTR Clip Point Putty Knife J41210 8” half round bastard file 6/36 • Solid plastic handle Heavy Duty Utility Knife - Carded • Mirror finish tempered high carbon steel blade • Precision ground • Safety orange color • Full tang • Solid east metal • Professional grade • Retractable • Blade included • Carded PART NO. DESCRIPTION CTN QTY PART NO. DESCRIPTION CTN/MSTR K50046 Heavy duty utility knife 12/144 K50012 Clip point putty knife 10/100 K50043 Utility knife replacement blades with dispenser (100/pk) 6/36 Mini Scraper with 5 Replacement Blades Chip Brush • Pure 100% natural white color bristle • Epoxy set bristles for lasting durability • Can be used with all paints, glues, and stains • Interior/exterior • Smooth natural wood handles PART NO. DESCRIPTION CTN/MSTR PART NO. DESCRIPTION CTN/MSTR B29805 1-1/2” chip brush 36/864 K50045 Mini scraper with 5 replacement blades 6/36 B29806 2” chip brush 36/864 B29807 3” chip brush 12/432 20 Compartment Parts Box B29808 4” chip brush 12/288 • Includes extra dividers to increase the amount of compartments Long Handle Wire Brush with Scraper • Long bent handle • 3x19 rows • For removing rust and corrosion from metals, roughing-up PART NO. -
Techni Edge 100006392 Catal
WELCOME At IDL Techni Edge we manufacture, develop, and acquire, Innovative, Durable, & Leadership products —specializing in razor blades with supporting product lines of knives and hand tools. Our goal is to provide products that help end-users—do-it-yourselfers, pros, and industry—complete their work more effectively and efficiently. We are focused on consistently exceeding the performance expectations of our end-users, distributors, retail customers, and partners. Since 1979, Techni Edge has designed and manufactured the finest quality blades for every purpose imaginable from basic single edge blades to the most advanced industrial or medical application blades. With production facilities in New Jersey, Techni Edge is a leading U.S.-based manufacturer of high quality blades and knives for do-it-yourself, hobby, construction, industrial, medical, and food processing industries. Over the years Techni Edge has earned a reputation for making great products and the designation, THE BLADE AMERICA BUYS®. To further advance the quality and performance of our products, boost capacity, and strengthen our operation, IDL Techni Edge, LLC continues to significantly invest in blade manufacturing technology and equipment. Additionally, while many companies are picking up and moving jobs out of the country IDL Techni Edge has been adding jobs in the United States. We take great pride and satisfaction in being able to state that the vast majority our blades continue to be proudly MADE IN THE USA. Our entire team at IDL Techni Edge is committed to results, corporate integrity, and continuous improvement. We believe this commitment is helping us become a preferred source for razor blades and supporting tools. -
Using Veneering Tools
Using veneer hand tools Veneer Tape Dispenser A gum tape dispenser that will take 3/4”wide gum tape is excellent for securing veneer seams together. A manual pull and tear machine which has a brush or sponge that will moisten tape (25 gram weight). It is indispensable for any shop that works with veneer. A sponge in a cup works well for moistening short lengths of tape for smaller projects. Veneer Gum Tape 25 to 30 gram (non-perforated) veneer tape that has water activated hide or vegetable glue is ideal for veneering. It is cut to length, moistened with a sponge or with the tape dispenser wetting system, placed over the veneer seam or joint, and smoothed or burnished down with a brush or rag to secure it firmly onto the veneer. It is used for final assembly of veneer joints in decorative veneering, in order to create a single skin or sheet of veneer. Ideally, after the gum tape is applied over the joints, the assembled veneer skin gets placed between two plattens to insure that the moisture from the gum tape does not warp the veneer until it dries. This complete skin will then be glued onto a foundation or core of smooth plywood or MDF, with the gum tape side exposed. After the veneer is glued to the core with a mechanical or vacuum type veneer press, the tape is removed by moistening and peeling it off with a sharpened flexible putty knife, or sanded off the veneer with a belt, stroke or random orbital sander. -
Journal of the North American Bluebird Society
LUEBIRD BJournal of the North American Bluebird Society Winter 2008-09 Vol. 31 No. 1 Table of Contents Long Wendell Winter Message to our Affiliate Organizations -Brian Swanson ..................................................................................... 1 From the President - Jonathan Ridgeway ............................................................................................................................... 2 From the Managing Editor - Scott Gillihan ............................................................................................................................. 5 Bluebird Nest Monitoring in Boulder County, Colorado - George Oetzel ..................................................................... 6 Fledge More Bluebirds Next Year - Keith Radel ................................................................................................................... 9 Mommy’s Bluebirds - Fred Harwood and Michelle Harwood ............................................................................................. 10 In the Spirit of Thanksgiving - Johathan Ridgeway .............................................................................................................. 12 NABS Conference 2009 ................................................................................................................................................................... insert Eagle Marsh Restored for Bluebirds, Other Wildlife - Judy Nelsen .............................................................................. -
PAL User Manual Installation and Operation HTC PAL PAL HTC-Xt
HTC PAL / PAL HTC-xt User Manual Installation and Operation PAL User Manual Installation and Operation HTC PAL PAL HTC-xt Printing History Edition 1 January 1999 Software Version 2.0 Edition 2 April 2003 Software Version 2.0 Edition 3 November 2009 Software Version 2.5 to 4.1.X Edition 4 March 2010 Software Version 2.5 to 4.1.X Edition 5 June 2010 Software Version 2.5 to 4.1.X Edition 6 March 2013 Software Version 2.6 to 4.3.X Original Instructions CTC Analytics AG reserves the right to make improvements and/or changes to the product(s) described in this document at any time without prior notice. CTC Analytics AG makes no warranty of any kind pertaining to this product, including but not limited to implied warranties of merchantability and suitability for a particular purpose. Under no circumstances shall CTC Analytics AG be held liable for any coincidental damage or damages arising as a consequence of or from the use of this document. © 1999 – 2013 CTC Analytics AG. All rights reserved. Neither this publication nor any part hereof may be copied, photocopied, reproduced, translated, distributed or reduced to electronic medium or machine readable form without the prior written permission from CTC Analytics AG, except as permitted under copyright laws. CTC Analytics AG acknowledges all trade names and trademarks used as the property of their respective owners. 1• HTC PAL / PAL HTC-xt User Manual Installation and Operation A. Safety Information Safety Information and Warnings for Users of the PAL System General Considerations The PAL System User Manual and related documents must be consulted by the user under all circumstances before a unit is put to use.