Interchange: Spherical Roller Bearings for Paper Industry

Total Page:16

File Type:pdf, Size:1020Kb

Interchange: Spherical Roller Bearings for Paper Industry We pioneer motion Interchange: Spherical Roller Bearings for Paper Industry Preferred Preferred Schaeffler SKF NSK Timken Schaeffler Description Schaeffler Alternative Schaeffler Alternative Straight Bore Tapered Bore Standard C / CC EA / C / CD EJ Pressed steel cage M M — EM / YM One-piece brass cage, roller guided MA / MA1 MA — — Machined brass cage, OR guided MB / MB1 CA / CAC CAM / AM EMB / YMB Machined brass cage, inner ring guided, center flange K K K K Tapered bore (1:12 on diameter) K30 K30 K30 K30 Tapered bore (1:30 on diameter) 240...., 241..., 242... Series C3 C3 C3 C3 Radial clearance larger than normal C4 C4 C4 C4 Radial clearance larger than C3 W209B ECB / HA3 g3 W40I Case hardened inner ring T52BE C02 P53 C02 P5 running accuracy for the inner ring + J26A H140 T52BW T52BN C04 P52 C04 P5 running accuracy for the outer ring + J26B H140 T52BW T52BW C08 P55 C08 T52BE + T52BN H140 T52BW T52BW-C3 C083 P55 C3 C08C3 T52BW with C3 clearance H140-C3 T52BW-C3 T52BW-C4 C084 P55 C4 C08C4 T52BW with C4 clearance H140-C4 T52BW-C4 H40 W — W841 No lubricating groove or lubricating holes in the outer ring — W31 W31 W31 Obsolete Beloit quality standard W33 Standard E4 W33 lubricating groove and 3 lubricating holes in the outer ring W506 = W33+W31 W503 = W4+W33 W4+E4 W4 J26A Point of max. radial runout marked on inner ring or sleeve H140 T52BW W507 = W4+W33+W31 W507 W507 J26B W529 = W58+W33 — — Point of max. radial runout marked on outer ring H140 T52BW J26C W515 — — Point of max. radial runout marked on inner and outer ring H140 T52BW T50H W502 = W22+W33 — W502 Restricted tolerance of outside diameter (toward minus minus) W513 = W26+W33 E7 W94+W33 H40AB 6 lubricating holes in the inner ring H140 W509 = W26+W33+W31 W509 W509 H40AC — W89 H40AB + lubricating groove in the inner ring H140 W77 W84 H44SA E42 3 aluminum plugs for closing lubricating holes in outer ring H140 T52BW W525 = W77+W31 W525 H44SB — — — H40AC + 6 aluminum plugs for closing lubricating holes in inner ring H140 J48BB L5DA DLC W6R Surface coating of barrel rollers with Triondur C Technical Specifications: T52BW and H140 The universal designs T52BW and H140 combine the special requirements for spherical roller bearings of outside diameter 320 mm and larger in paper machines. It brings together design variants in technical specifications that cover most of the bearing locations in the paper equipment. • T52BW is used as a universal design in tapered and straight bore spherical roller bearings • H140 is used as a universal design in straight bore spherical roller bearings and includes T52BW as well as H44SA and H44SB H40AB 6 lubricating holes in the inner ring H40AC H40AB + lubricating groove in the inner ring H44SB H40AC + 6 aluminum plugs for closing lubricating holes in inner ring H140 Standard Lubricating groove and 3 lubricating holes in the outer ring H44SA 3 aluminum plugs for closing lubricating holes in outer ring T52BW Use of one suffix for most bearing applications J26C Point of max. radial runout marked on inner and outer ring allows for reduced inventory P5 running accuracy for inner and outer ring & increased availability Schaeffler Steel and Brass Cage Versions J4641_1220 ©2020 Steel Steel M Brass MA & MA1 Brass MB Brass MB1 Brass.
Recommended publications
  • Heater Element Specifications Bulletin Number 592
    Technical Data Heater Element Specifications Bulletin Number 592 Topic Page Description 2 Heater Element Selection Procedure 2 Index to Heater Element Selection Tables 5 Heater Element Selection Tables 6 Additional Resources These documents contain additional information concerning related products from Rockwell Automation. Resource Description Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Provides general guidelines for installing a Rockwell Automation industrial system. Product Certifications website, http://www.ab.com Provides declarations of conformity, certificates, and other certification details. You can view or download publications at http://www.rockwellautomation.com/literature/. To order paper copies of technical documentation, contact your local Allen-Bradley distributor or Rockwell Automation sales representative. For Application on Bulletin 100/500/609/1200 Line Starters Heater Element Specifications Eutectic Alloy Overload Relay Heater Elements Type J — CLASS 10 Type P — CLASS 20 (Bul. 600 ONLY) Type W — CLASS 20 Type WL — CLASS 30 Note: Heater Element Type W/WL does not currently meet the material Type W Heater Elements restrictions related to EU ROHS Description The following is for motors rated for Continuous Duty: For motors with marked service factor of not less than 1.15, or Overload Relay Class Designation motors with a marked temperature rise not over +40 °C United States Industry Standards (NEMA ICS 2 Part 4) designate an (+104 °F), apply application rules 1 through 3. Apply application overload relay by a class number indicating the maximum time in rules 2 and 3 when the temperature difference does not exceed seconds at which it will trip when carrying a current equal to 600 +10 °C (+18 °F).
    [Show full text]
  • Experience a Lower Total Cost of Ownership
    EXPERIENCE A LOWER TOTAL COST OF OWNERSHIP Timken® Spherical Roller Bearings are engineered to give you more of what you need. Lower Operating Temperatures Rollers are guided by cage pockets—not a center guide ring—eliminating a friction point and resulting in 4–10% less rotational torque and 5ºC lower operating temperatures.* Less rotational torque leads to improved efficiency, lower energy consumption and more savings. Lower temperatures reduce the oil oxidation rate by 50% to extend lubricant life. Tougher Protection Hardened steel cages deliver greater fatigue strength, increased wear resistance and tougher protection against shock and acceleration. Optimized Uptime Unique slots in the cage face improve oil flow and purge more contaminants from the bearing to help extend equipment uptime. Minimized Wear Improved profiles reduce internal stresses and optimize load distribution to minimize wear. Improved Lube Film Enhanced surface finishes avoid metal-to-metal contact to reduce friction and result in improved lube film. Higher Loads Longer rollers result in 4–8% higher load ratings or 14–29% longer predicted bearing life. Higher load ratings enable you to carry heavier loads. Brass Cages Available in all sizes; ready when you need extra strength and durability in the most unrelenting conditions, including extreme shock and vibration, high acceleration forces, and minimal lubrication. Increase your operational efficiencies and extend maintenance intervals. Starting now. Visit Timken.com/spherical to find out more. *All results are from head-to-head
    [Show full text]
  • Case I,I,Emptyset,P7.Nb
    Definitions: In[56]:= $Assumptions = w12 ≥ 0 && w13 ≥ 0 && w16 ≥ 0 && w24 ≥ 0 && w25 ≥ 0 && w36 ≥ 0 && w45 ≥ 0 && u > 0 && v > 0 && w21 ≥ 0 && w31 ≥ 0 && w61 ≥ 0 && w42 ≥ 0 && w52 ≥ 0 && w63 ≥ 0 && w54 ≥ 0 && K34 > 0 && K56 > 0 && K31 > 0 && K51 > 0 w = {{0, w12, w13, 0, 0, w16}, {w21, 0, 0, w24, w25, 0}, {w31, 0, 0, u, 0, w36}, {0, w42, u / K34, 0, w45, 0}, {0, w52, 0, w54, 0, v}, {w61, 0, w63, 0, v / K56, 0}} Out[56]= w12 ≥ 0 && w13 ≥ 0 && w16 ≥ 0 && w24 ≥ 0 && w25 ≥ 0 && w36 ≥ 0 && w45 ≥ 0 && u > 0 && v > 0 && w21 ≥ 0 && w31 ≥ 0 && w61 ≥ 0 && w42 ≥ 0 && w52 ≥ 0 && w63 ≥ 0 && w54 ≥ 0 && K34 > 0 && K56 > 0 && K31 > 0 && K51 > 0 Out[57]= {0, w12, w13, 0, 0, w16}, {w21, 0, 0, w24, w25, 0}, {w31, 0, 0, u, 0, w36}, u v 0, w42, , 0, w45, 0, {0, w52, 0, w54, 0, v}, w61, 0, w63, 0, , 0 K34 K56 In[58]:= MatrixForm[w] Out[58]//MatrixForm= 0 w12 w13 0 0 w16 w21 0 0 w24 w25 0 w31 0 0 u 0 w36 0 w42 u 0 w45 0 K34 0 w52 0 w54 0 v w61 0 w63 0 v 0 K56 Sum of rows In[59]:= d = Table[Total[w[[i, All]]], {i, 6}] d34 = Collect[Expand[d[[3]] * d[[4]] - w[[3, 4]] * w[[4, 3]]], u] d56 = Collect[Expand[d[[5]] * d[[6]] - w[[5, 6]] * w[[6, 5]]], v] u v Out[59]= w12 + w13 + w16, w21 + w24 + w25, u + w31 + w36, + w42 + w45, v + w52 + w54, + w61 + w63 K34 K56 w31 w36 Out[60]= w31 w42 + w36 w42 + w31 w45 + w36 w45 + u + + w42 + w45 K34 K34 w52 w54 Out[61]= w52 w61 + w54 w61 + w52 w63 + w54 w63 + v + + w61 + w63 K56 K56 Effective reaction rates after elimination of metabolites 5 and 6 (useful for easy differentiation w.r.to u), and the final effective reaction rate
    [Show full text]
  • LA Express Quick Ship Program
    EXPRESS VOLUME 3 SOFAS SECTIONALS CHAIRS BEDS FABRICS FOR HICKORY WHITE LA EXPRESS: LA6258S Hinson Sofa (see page 3) 70+ Frames 100+ Fabrics 4 to 6 Week Shipping FOR IN-STOCK FABRICS Our best-selling Lillian August sofas, chairs and beds are now able to be shipped in 20 working days from date of acknowledgment. Available in our most popular Designer Select fabrics, these combinations of fabric and frame are the tried and proven top performers. Mark all orders LA EXPRESS. Note: Standard throw pillows must be in a quick ship fabric and wood finish must be in a standard finish to receive all program benefits. Click on the photo of any product for more details. LA7116S Paris Sofa (shown) Loose pillow back (two) Overall: W97 D39 H35 Inside: W87 D22 H17 Arm height: 28 Seat height: 19 Standard pillows: two 21" throw pillows Standard with #1-P nail trim, spaced as shown. Standard with casters. Available in any standard finish. LA7113S Royce Court Sofa (shown) Loose pillow back (two) ALSO AVAILABLE: Overall: W87 D37 H37 Inside: W81 D20 H19 LA7116L Paris Loveseat Arm height: 23 Seat height: 19 Loose pillow back (two) Two seat cushions Overall: W67 D39 H35 Inside: W57 D22 H17 Dressmaker skirt Arm height: 28 Seat height: 19 Standard pillows: two 21" throw pillows ALSO AVAILABLE: Standard with #1-P nail trim. LA7113M Royce Court Mid Sofa Standard with casters. Loose pillow back (two) Available in any standard finish. Overall: W77 D37 H37 Inside: W71 D20 H19 Arm height: 23 Seat height: 19 LA7116M Paris Mid-Sofa Two seat cushions Loose pillow back (two) Dressmaker skirt Overall: W87 D39 H35 Inside: W77 D22 H17 Arm height: 28 Seat height: 19 LA7113C Royce Court Chair (see page 22) Standard pillows: two 21" throw pillows Standard with #1-P nail trim.
    [Show full text]
  • Nuclear Weapons Databook, Volume I 3 Stockpile
    3 Stockpile Chapter Three USNuclear Stockpile This section describes the 24 types of warheads cur- enriched uranium (oralloy) as its nuclear fissile material rently in the U.S. nuclear stockpile. As of 1983, the total and is considered volatile and unsafe. As a result, its number of warheads was an estimated 26,000. They are nuclear materials and fuzes are kept separately from the made in a wide variety of configurations with over 50 artillery projectile. The W33 can be used in two differ- different modifications and yields. The smallest war- ent yield configurations and requires the assembly and head is the man-portable nuclear land mine, known as insertion of distinct "pits" (nuclear materials cores) with the "Special Atomic Demolition Munition" (SADM). the amount of materials determining a "low" or '4high'' The SADM weighs only 58.5 pounds and has an explo- yield. sive yield (W54) equivalent to as little as 10 tons of TNT, In contrast, the newest of the nuclear warheads is the The largest yield is found in the 165 ton TITAN I1 mis- W80,5 a thermonuclear warhead built for the long-range sile, which carries a four ton nuclear warhead (W53) Air-Launched Cruise Missile (ALCM) and first deployed equal in explosive capability to 9 million tons of TNT, in late 1981. The W80 warhead has a yield equivalent to The nuclear weapons stockpile officially includes 200 kilotons of TNT (more than 20 times greater than the only those nuclear missile reentry vehicles, bombs, artil- W33), weighs about the same as the W33, utilizes the lery projectiles, and atomic demolition munitions that same material (oralloy), and, through improvements in are in "active service."l Active service means those electronics such as fuzing and miniaturization, repre- which are in the custody of the Department of Defense sents close to the limits of technology in building a high and considered "war reserve weapons." Excluded are yield, safe, small warhead.
    [Show full text]
  • W88 Picking, Multi Pass (Rubber 65 Shore)
    IGT Information leaflet W88 PICKING, Multi pass, rubber 65 Shore A IGT AIC2-5T2000, Global Standard Tester 2/3/3H Version July 2006 Introduction: Materials / testing conditions Most commonly picking of paper is defined as the damage of the 1 IGT AIC2-5T2000 710.000.000 paper surface during the printing operation. At the time the printing or IGT Global Standard Tester 2 412.000.000 form is lifted off the paper the ink is exerting a certain force on the or IGT Global Standard Tester 3 416.000.000 paper. This force is increasing with an increase in the viscosity and or IGT Global Standard Tester 3H 467.000.000 tack of the ink and the printing speed. When this force exceeds a 2 IGT High Speed Inking Unit 4 466.000.710 certain value, the surface of the paper will be damaged. This test 3 (Top roller with 4 segments for conventional inks) 466.003.003 can be used to determine the delamination of paperboard as well. 4 IGT Ink pipette 408.000.200 In IGT leaflets W31, W65 and W75 the standard pick test is 5 Printing disc with coated rubber, 65 Shore A, 50 402.087 described: making a print at an increasing speed and assessment of mm, ø 66 mm the speed at which picking begins. 6 Huber pick test ink, low viscosity 404.800.001 or Huber pick test ink, medium viscosity 404.800.002 More or less imitating what happens in practice in a multi colour or Huber pick test ink, high viscosity 404.800.003 printing press is the method in which a paper sample is printed for or Huber pick test ink, very high viscosity 404.800.004 several times at a constant speed.
    [Show full text]
  • Timken® Common Paper Mill Bearing Modifications
    Timken® Common Paper Mill Bearing Modifi cations TIMKEN SKF FAG TIMKEN GENERAL DEFINITION CJ CC J Spherical with stamped steel cage YM M2 M One-piece roller riding machined bronze cage YMB CA MB1 One-piece inner ring piloted machined bronze cage C08 C08 T52BW P5 running accuracy (C02 and C04) C08 C3 C083 C3.T52BW P5 running accuracy (C02 and C04), C3 RIC C08 C4 C084 C4.T52BW P5 running accuracy (C02 and C04), C4 RIC K K K Tapered bore (1:12 on diameter 22, 23, 30, 31, 32, 33, 39 series) K K30 K30 Tapered bore (1:30 on diameter 40, 41, 42 series) W4 W4 J26A Mark high and low points of eccentricity on face of rings (included in Timken C08) W6R — — Engineered coating on rollers to combat low lube or abrasive contamination W8 — — Rings and rollers Timken coated with Thin Dense Chrome™ - a corrosion resistant coating W20 W20 SY Outer ring with standard lubrication holes, but no lubrication groove W22 W22 T50H Special reduced OD tolerance on outer rings W25 W73 — Outer ring with counter drilled lubrication hole W31 W31 — Bearing inspected to certain quality control requirements W33 W33 S Standard lubrication holes and groove in outer ring (FAG drops S from number for sizes larger than 315 mm OD) W37 — — Special RMS fi nish (MG or Yankee Dryer modifi cation) W40I ECB (Prefi x) or HA3 W209B Inner ring only made of carburizing grade steel W40R — — Rollers only made of carburizing grade steel W45A W61 — Tapped lifting holes in face of outer ring W84 W77 H44S (H40)* Outer ring with standard lubrication holes plugged W88 — — Special reduced bore tolerance on inner ring W93 — — Inner ring with keyway in bore W94 W26 H40A Inner ring lubrication holes and retainer face grooves (SKF and FAG – no retainer face grooves) W502 W502 (W22 + W33) S + TSOH W22, W33 and W45A (where feasible) W507 W507 (W31 + W33) S + W31, W33 and W45A (where feasible) W509 W509 (W26+W31 + W33) S.H40A + ..
    [Show full text]
  • Likely to Be Funded Transportation System
    Table 2: Likely to be Funded Transportation System Project # Project Description Project Extent Project Elements Priority Further Study Identify and evaluate circulation options to reduce motor OR 213/Beavercreek Road Refinement OR 213 from Redland Road to Molalla D0 vehicle congestion along the corridor. Explore alternative Short-term Plan Avenue mobility targets. Identify and evaluate circulation options to reduce motor I-205 at the OR 99E and OR 213 Ramp vehicle congestion at the interchanges. Explore alternative D00 I-205 Refinement Plan Short-term Terminals mobility targets, and consider impacts related to a potential MMA Designation for the Oregon City Regional Center. Driving Solutions (Intersection and Street Management- see Figure 16) Molalla Avenue from Washington Street to Molalla Avenue/ Beavercreek Road Deploy adaptive signal timing that adjusts signal timings to D1 Gaffney Lane; Beavercreek Road from Molalla Short-term Adaptive Signal Timing match real-time traffic conditions. Avenue to Maple Lane Road Option 1: Convert 14th Street to one-way eastbound between McLoughlin Boulevard and John Adams Street: • Convert the Main Street/14th Street intersection to all-way stop control (per project D13). • From McLoughlin Boulevard to Main Street, 14th Street would be restriped to include two 12-foot eastbound travel lanes, a six-foot eastbound bike lane, a six-foot westbound contra-flow bike lane, and an eight-foot landscaping buffer on the north side • From Main Street to Washington Street, 14th Street would be restriped to include
    [Show full text]
  • APRIL 2018 SUPPLEMENT PORTFOLIO Inspired by Classic Forms, the Portfolio Collection Adopts Modern Influences to Elevate Casual Silhouettes
    APRIL 2018 SUPPLEMENT PORTFOLIO Inspired by classic forms, the Portfolio collection adopts modern influences to elevate casual silhouettes. Deliberate consideration is given to proportion and form, balanced with an unwavering focus on comfort. Rooted in the core of Precedent’s design legacy, these timeless pieces introduce luxury into today’s interior living spaces. 3320-S1 Zelda Sofa 2 PRECEDENT-FURNITURE.COM PRECEDENT-FURNITURE.COM 1 PORTFOLIO 3311-C1 Elaine Chair / W31 D34 H30.5 Seat H17.5 / Arm H25 / Inside Seat W22 D22 Optional Ember finish shown Also available: L3311-C1 Elaine Leather Chair 3318-S1 Halifax Sofa / W87 D39 H37 Seat H20 / Arm H29.5 / Inside Seat W74 D22 Available in Espresso finish only Standard with two toss pillows Also available: L3318-S1 Halifax Leather Sofa 3327-C1 Marion Chair / W32.5 D38 H33.5 Seat H18 / Arm H24.5 / Inside Seat W21 D22 Available in Espresso finish only Also available: L3327-C1 Marion Leather Chair 3320-S1 Zelda Sofa / W90.5 D35.5 H30 Seat H17 / Arm H30 / Inside Seat W78 D23 Optional Ember finish shown Standard with two toss pillows 2 PRECEDENT-FURNITURE.COM PRECEDENT-FURNITURE.COM 3 3278-S1 Rosalyn Sofa (see main catalog, page 26), 229-830 Arles Round Cocktail Table, 3297-C1 Zoey Chair (see main catalog, page 136) 4 PRECEDENT-FURNITURE.COM PRECEDENT-FURNITURE.COM 5 PORTFOLIO 3280 Nicole Series 3282 Hilton Series 3280-SL Nicole Left Arm Sofa / W83.5 D38 H33 3280-CR Nicole Right Arm Chaise / W47 D65 H33 3282-S2 Hilton Sofa / W100 D42 H35 Seat H18 / Arm H22 / Inside Seat W73.5 D22 Seat H18 / Arm
    [Show full text]
  • Quick Ship Program
    LEATHERCRAFT & CATES COVE COLLECTION Comfortable s Beautiful s Liveable QUICK SHIP PROGRAM • 10 BUSINESS DAY PRODUCTION • OVER 75 DIFFERENT FRAMES TO CHOOSE FROM • OVER 160 LEATHER AND FABRIC CHOICES INCLUDING LEATHERS & FABRICS • MADE IN THE USA www.leathercraft-furniture.com 800.627.1561 SOFA GROUPS & SECTIONALS 1690 TIVOLI SOFA OUTSIDE: H33 W87 D38.5 INSIDE: H13.5 W77 D22.5 SEAT: H19.5 ARM: H24.5 1690 926-00 CLOUD NINE SOFA OUTSIDE: H35 W85 D38 INSIDE: H14.5 W71 D22 SEAT: H20.5 ARM: H27.5 926-00 912-00-1R 912-08/16 912-00/96 MAXINE SOFA OUTSIDE: H35 W96 D40 INSIDE: H16 W80 D22.5 SEAT: H18.5 ARM: H24 912-00-1L OR 912-00-1R LEFT OR RIGHT ARM SOFA OUTSIDE: H35 W89 D40 INSIDE: H16 W80.5 D22.5 SEAT: H18.5 ARM: H24 912-08/16 OR 912-08/15 LEFT OR RIGHT ARM CHAISE 912-00/96 OUTSIDE: H W37.5 D69 INSIDE: H W30 D54 SEAT: H ARM: H24 SOFA GROUPS & SECTIONALS 4440 PARK PLACE SOFA OUTSIDE: H32 W87 D38 INSIDE: H12 W72 D23 SEAT: H18.5 ARM: H25.5 SHOWN WITH (2) OPTIONAL THROW PILLOWS. 4440 920-00/40 MANHATTAN SOFA OUTSIDE: H36 W87 D39 INSIDE: H16 W74 D24 SEAT: H20 ARM: H24 LOOSE BACK / ZIPPERED TO SEAT 920-00/40 920-00 MANHATTAN SOFA OUTSIDE: H36 W87 D37 INSIDE: H16 W74 D22 SEAT: H20 ARM: H24 LOOSE BACK / ZIPPERED TO SEAT 920-00 920-02 MANHATTAN LOUNGE CHAIR OUTSIDE: H36 W37 D37 INSIDE: H16 W24 D22 SEAT: H20 ARM: H24 BACK: LOOSE PILLOW BACK/ZIPPER 920-02 920-03 MANHATTAN OTTOMAN OUTSIDE: H14 W27 D21 921-00 MANHATTAN SOFA (WITH WELT) OUTSIDE: H36 W87 D37 INSIDE: H16 W74 D22 SEAT: H20 ARM: H24 LOOSE BACK / ZIPPERED TO SEAT 921-00 SOFA GROUPS & SECTIONALS
    [Show full text]
  • Download Spec Sheet
    THE SLIM CONFIGURATIONS WIDTH DEPTH HEIGHT 86505 SLIM OTTOMAN 35IN. 29IN. 11IN. 86509 SLIM CORNER CHAIR 37IN. 37IN. 32IN. 86510 SLIM CHAIR 36IN. 37IN. 32IN. 86511 SLIM RIGHT ARM CHAIR 31IN. 37IN. 32IN. 86512 SLIM LEFT ARM CHAIR 31IN. 37IN. 32IN. 86513 SLIM ARMLESS CHAIR 26IN. 37IN. 32IN. 86520 SLIM LOVESEAT 62IN. 37IN. 32IN. 86521 SLIM RIGHT ARM LOVESEAT 57IN. 37IN. 32IN. 86522 SLIM LEFT ARM LOVESEAT 57IN. 37IN. 32IN. 86523 SLIM ARMLESS LOVESEAT 52IN. 37IN. 32IN. 86530 SLIM SOFA 88IN. 37IN. 32IN. 86531 SLIM RIGHT ARM CORNER SOFA 94IN. 37IN. 32IN. 86532 SLIM LEFT ARM CORNER SOFA 94IN. 37IN. 32IN. 86533 SLIM RIGHT ARM SOFA 83IN. 37IN. 32IN. 86534 SLIM LEFT ARM SOFA 83IN. 37IN. 32IN. 86535 SLIM APT SOFA 78IN. 37IN. 32IN. 86536 SLIM RIGHT ARM APARTMENT SOFA 73IN. 37IN. 32IN. 86537 SLIM LEFT ARM APARTMENT SOFA 73IN. 37IN. 32IN. 86538 SLIM ARMLESS APARTMENT SOFA 68IN. 37IN. 32IN. 86539 SLIM ARMLESS SOFA 78IN. 37IN. 32IN. 86560 SLIM CHAISE 40IN. 63IN. 32IN. 86561 SLIM RIGHT ARM CHAISE 35IN. 63IN. 32IN. 86562 SLIM LEFT ARM CHAISE 35IN. 63IN. 32IN. 86563 SLIM ARMLESS CHIASE 30IN. 63IN. 32IN. 86580 SLIM LARGE SOFA 98IN. 37IN. 32IN. 86581 SLIM RIGHT ARM LARGE SOFA 93IN. 37IN. 32IN. 86582 SLIM LEFT ARM LARGE SOFA 93IN. 37IN. 32IN. 86583 SLIM ARMLESS LARGE SOFA 88IN. 37IN. 32IN. EST. 1989 // AUTHENTIC HAND BUILT FURNITURE // THOMASVILLE, NORTH CAROLINA THE SLIM 94" 94" SHOWN 86522 LEFT ARM LOVESEAT 865 SLIM 1:150 SCALE SHOWN 86531 RIGHT ARM CORNER SOFA 86505 OTTOMAN 86509 CORNER CHAIR 86510 CHAIR 86511 RIGHT ARM CHAIR 86512 LEFT ARM CHAIR TOTAL W35"
    [Show full text]
  • Water Volume Index, 1869 - 1906
    November 14, 2004 WATER VOLUME INDEX, 1869 - 1906 Name Date Entry Number Name Date Entry Number A B Accounting: Baldwin Creek See: nd W122 Receipts and Expenses Baldwin, Frederick Douglass, Supervisor Agreements 1900 W85 Branciforte 1901 W101 1877 W38-W42 Baldwin, Levi Karner Agreements, Water 1881 W63 Branciforte Ball-cocks 1877 W9-W11,W28-W32,W35-W37,W43- See: W45,W89-W91 Water Valves 1900 W82-W83 Bank of Santa Cruz County 1901 W92,W95,W98-W100 1882 W60 1902 W103-W107,W109-W115 Banks 1904 W117-W118 See: Laguna Bank of Santa Cruz County 1881 W68-W70 Santa Cruz Bank of Savings & Loan Santa Cruz Baptist Churches 1882 W58-W59 See: 1900 W85 Twin Lakes Baptist Assembly 1901 W94,W101 Barns 1902 W102 Branciforte 1904 W116 1877 W40 1906 W119-W121 1901 W98 Soquel Bath Tubs 1901 W96-W97 See: See also: Home Furnishings Water Rights Bay Street Agriculture Santa Cruz See: nd W77,W79 Farms and Agriculture 1888 W13-W14,W19 Alfalfa Ben Lomond Winery See: 1901 W99 Hay 1904 W117 Allardt, George F. Bennett, E.H. [Reverend] 1888 W20 1906 W119 Almstead, Fanny A. [aka Mrs. Leonard T. Berries [Crop] Almstead], Grantor Branciforte 1881 W1-W4,W46-W51 1901 W92 1882 W73-W74 Santa Cruz Almstead, Leonard T. 1900 W81 1881 W62-W63,W68-W69 1906 W121 Almstead, Leonard T., Grantor Bias, William Henry, Clerk 1881 W1-W4,W46-51 1888 W57 1882 W73-74 Blackberries Anthony, Elihu, Grantee See: 1869 W75 Berries Anthony, George Blackburn Dam 1877 W12,W33 1877 W29 Anthony’s Farm Blackburn Gulch 1877 W12,W33 1895 W87 Aqueducts Blackburn Gulch Road See: Branciforte Dams and Flumes 1900 W82 Arana Gulch 1901 W99 1902 W103 1904 W117 Arroyo de la Villa Blaine Street 1869 W75 Santa Cruz 1906 W121 Index: Water Volume F.A.
    [Show full text]